+++ /dev/null
-/*
- zr36120.c - Zoran 36120/36125 based framegrabbers
-
- Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/signal.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/sched.h>
-#include <linux/video_decoder.h>
-
-#include <asm/uaccess.h>
-
-#include "tuner.h"
-#include "zr36120.h"
-#include "zr36120_mem.h"
-
-/* mark an required function argument unused - lintism */
-#define UNUSED(x) (void)(x)
-
-/* sensible default */
-#ifndef CARDTYPE
-#define CARDTYPE 0
-#endif
-
-/* Anybody who uses more than four? */
-#define ZORAN_MAX 4
-
-static unsigned int triton1=0; /* triton1 chipset? */
-static unsigned int cardtype[ZORAN_MAX]={ [ 0 ... ZORAN_MAX-1 ] = CARDTYPE };
-static int video_nr = -1;
-static int vbi_nr = -1;
-
-static struct pci_device_id zr36120_pci_tbl[] = {
- { PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, zr36120_pci_tbl);
-
-MODULE_AUTHOR("Pauline Middelink <middelin@polyware.nl>");
-MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber");
-MODULE_LICENSE("GPL");
-
-module_param(triton1, uint, 0);
-module_param_array(cardtype, uint, NULL, 0);
-module_param(video_nr, int, 0);
-module_param(vbi_nr, int, 0);
-
-static int zoran_cards;
-static struct zoran zorans[ZORAN_MAX];
-
-/*
- * the meaning of each element can be found in zr36120.h
- * Determining the value of gpdir/gpval can be tricky. The
- * best way is to run the card under the original software
- * and read the values from the general purpose registers
- * 0x28 and 0x2C. How you do that is left as an exercise
- * to the impatient reader :)
- */
-#define T 1 /* to separate the bools from the ints */
-#define F 0
-static struct tvcard tvcards[] = {
- /* reported working by <middelin@polyware.nl> */
-/*0*/ { "Trust Victor II",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by <Michael.Paxton@aihw.gov.au> */
-/*1*/ { "Aitech WaveWatcher TV-PCI",
- 3, 0, T, F, T, T, 0x7F, 0x80, { 1, TUNER(3), SVHS(6) }, { 0 } },
- /* reported working by ? */
-/*2*/ { "Genius Video Wonder PCI Video Capture Card",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by <Pascal.Gabriel@wanadoo.fr> */
-/*3*/ { "Guillemot Maxi-TV PCI",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by "Craig Whitmore <lennon@igrin.co.nz> */
-/*4*/ { "Quadrant Buster",
- 3, 3, T, F, T, T, 0x7F, 0x80, { SVHS(1), TUNER(2), 3 }, { 1, 2, 3 } },
- /* a debug entry which has all inputs mapped */
-/*5*/ { "ZR36120 based framegrabber (all inputs enabled)",
- 6, 0, T, T, T, T, 0x7F, 0x80, { 1, 2, 3, 4, 5, 6 }, { 0 } }
-};
-#undef T
-#undef F
-#define NRTVCARDS (sizeof(tvcards)/sizeof(tvcards[0]))
-
-#ifdef __sparc__
-#define ENDIANESS 0
-#else
-#define ENDIANESS ZORAN_VFEC_LE
-#endif
-
-static struct { const char name[8]; uint mode; uint bpp; } palette2fmt[] = {
-/* n/a */ { "n/a", 0, 0 },
-/* GREY */ { "GRAY", 0, 0 },
-/* HI240 */ { "HI240", 0, 0 },
-/* RGB565 */ { "RGB565", ZORAN_VFEC_RGB_RGB565|ENDIANESS, 2 },
-/* RGB24 */ { "RGB24", ZORAN_VFEC_RGB_RGB888|ENDIANESS|ZORAN_VFEC_PACK24, 3 },
-/* RGB32 */ { "RGB32", ZORAN_VFEC_RGB_RGB888|ENDIANESS, 4 },
-/* RGB555 */ { "RGB555", ZORAN_VFEC_RGB_RGB555|ENDIANESS, 2 },
-/* YUV422 */ { "YUV422", ZORAN_VFEC_RGB_YUV422|ENDIANESS, 2 },
-/* YUYV */ { "YUYV", 0, 0 },
-/* UYVY */ { "UYVY", 0, 0 },
-/* YUV420 */ { "YUV420", 0, 0 },
-/* YUV411 */ { "YUV411", 0, 0 },
-/* RAW */ { "RAW", 0, 0 },
-/* YUV422P */ { "YUV422P", 0, 0 },
-/* YUV411P */ { "YUV411P", 0, 0 }};
-#define NRPALETTES (sizeof(palette2fmt)/sizeof(palette2fmt[0]))
-#undef ENDIANESS
-
-/* ----------------------------------------------------------------------- */
-/* ZORAN chipset detector */
-/* shamelessly stolen from bttv.c */
-/* Reason for beeing here: we need to detect if we are running on a */
-/* Triton based chipset, and if so, enable a certain bit */
-/* ----------------------------------------------------------------------- */
-static
-void __init handle_chipset(void)
-{
- /* Just in case some nut set this to something dangerous */
- if (triton1)
- triton1 = ZORAN_VDC_TRICOM;
-
- if (pci_pci_problems & PCIPCI_TRITON) {
- printk(KERN_INFO "zoran: Host bridge 82437FX Triton PIIX\n");
- triton1 = ZORAN_VDC_TRICOM;
- }
-}
-
-/* ----------------------------------------------------------------------- */
-/* ZORAN functions */
-/* ----------------------------------------------------------------------- */
-
-static void zoran_set_geo(struct zoran* ztv, struct vidinfo* i);
-
-#if 0 /* unused */
-static
-void zoran_dump(struct zoran *ztv)
-{
- char str[256];
- char *p=str; /* shut up, gcc! */
- int i;
-
- for (i=0; i<0x60; i+=4) {
- if ((i % 16) == 0) {
- if (i) printk("%s\n",str);
- p = str;
- p+= sprintf(str, KERN_DEBUG " %04x: ",i);
- }
- p += sprintf(p, "%08x ",zrread(i));
- }
-}
-#endif /* unused */
-
-static
-void reap_states(struct zoran* ztv)
-{
- /* count frames */
- ztv->fieldnr++;
-
- /*
- * Are we busy at all?
- * This depends on if there is a workqueue AND the
- * videotransfer is enabled on the chip...
- */
- if (ztv->workqueue && (zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN))
- {
- struct vidinfo* newitem;
-
- /* did we get a complete frame? */
- if (zrread(ZORAN_VSTR) & ZORAN_VSTR_GRAB)
- return;
-
-DEBUG(printk(CARD_DEBUG "completed %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue));
-
- /* we are done with this buffer, tell everyone */
- ztv->workqueue->status = FBUFFER_DONE;
- ztv->workqueue->fieldnr = ztv->fieldnr;
- /* not good, here for BTTV_FIELDNR reasons */
- ztv->lastfieldnr = ztv->fieldnr;
-
- switch (ztv->workqueue->kindof) {
- case FBUFFER_GRAB:
- wake_up_interruptible(&ztv->grabq);
- break;
- case FBUFFER_VBI:
- wake_up_interruptible(&ztv->vbiq);
- break;
- default:
- printk(CARD_INFO "somebody killed the workqueue (kindof=%d)!\n",CARD,ztv->workqueue->kindof);
- }
-
- /* item completed, skip to next item in queue */
- write_lock(&ztv->lock);
- newitem = ztv->workqueue->next;
- ztv->workqueue->next = 0; /* mark completed */
- ztv->workqueue = newitem;
- write_unlock(&ztv->lock);
- }
-
- /*
- * ok, so it seems we have nothing in progress right now.
- * Lets see if we can find some work.
- */
- if (ztv->workqueue)
- {
- struct vidinfo* newitem;
-again:
-
-DEBUG(printk(CARD_DEBUG "starting %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue));
-
- /* loadup the frame settings */
- read_lock(&ztv->lock);
- zoran_set_geo(ztv,ztv->workqueue);
- read_unlock(&ztv->lock);
-
- switch (ztv->workqueue->kindof) {
- case FBUFFER_GRAB:
- case FBUFFER_VBI:
- zrand(~ZORAN_OCR_OVLEN, ZORAN_OCR);
- zror(ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR);
- zror(ZORAN_VDC_VIDEN,ZORAN_VDC);
-
- /* start single-shot grab */
- zror(ZORAN_VSTR_GRAB, ZORAN_VSTR);
- break;
- default:
- printk(CARD_INFO "what is this doing on the queue? (kindof=%d)\n",CARD,ztv->workqueue->kindof);
- write_lock(&ztv->lock);
- newitem = ztv->workqueue->next;
- ztv->workqueue->next = 0;
- ztv->workqueue = newitem;
- write_unlock(&ztv->lock);
- if (newitem)
- goto again; /* yeah, sure.. */
- }
- /* bye for now */
- return;
- }
-DEBUG(printk(CARD_DEBUG "nothing in queue\n",CARD));
-
- /*
- * What? Even the workqueue is empty? Am i really here
- * for nothing? Did i come all that way to... do nothing?
- */
-
- /* do we need to overlay? */
- if (test_bit(STATE_OVERLAY, &ztv->state))
- {
- /* are we already overlaying? */
- if (!(zrread(ZORAN_OCR) & ZORAN_OCR_OVLEN) ||
- !(zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN))
- {
-DEBUG(printk(CARD_DEBUG "starting overlay\n",CARD));
-
- read_lock(&ztv->lock);
- zoran_set_geo(ztv,&ztv->overinfo);
- read_unlock(&ztv->lock);
-
- zror(ZORAN_OCR_OVLEN, ZORAN_OCR);
- zrand(~ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR);
- zror(ZORAN_VDC_VIDEN,ZORAN_VDC);
- }
-
- /*
- * leave overlaying on, but turn interrupts off.
- */
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
- return;
- }
-
- /* do we have any VBI idle time processing? */
- if (test_bit(STATE_VBI, &ztv->state))
- {
- struct vidinfo* item;
- struct vidinfo* lastitem;
-
- /* protect the workqueue */
- write_lock(&ztv->lock);
- lastitem = ztv->workqueue;
- if (lastitem)
- while (lastitem->next) lastitem = lastitem->next;
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- if (item->next == 0 && item->status == FBUFFER_FREE)
- {
-DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item));
- item->status = FBUFFER_BUSY;
- if (!lastitem)
- ztv->workqueue = item;
- else
- lastitem->next = item;
- lastitem = item;
- }
- write_unlock(&ztv->lock);
- if (ztv->workqueue)
- goto again; /* hey, _i_ graduated :) */
- }
-
- /*
- * Then we must be realy IDLE
- */
-DEBUG(printk(CARD_DEBUG "turning off\n",CARD));
- /* nothing further to do, disable DMA and further IRQs */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
-}
-
-static
-void zoran_irq(int irq, void *dev_id)
-{
- u32 stat,estat;
- int count = 0;
- struct zoran *ztv = dev_id;
-
- UNUSED(irq);
- for (;;) {
- /* get/clear interrupt status bits */
- stat=zrread(ZORAN_ISR);
- estat=stat & zrread(ZORAN_ICR);
- if (!estat)
- return;
- zrwrite(estat,ZORAN_ISR);
- IDEBUG(printk(CARD_DEBUG "estat %08x\n",CARD,estat));
- IDEBUG(printk(CARD_DEBUG " stat %08x\n",CARD,stat));
-
- if (estat & ZORAN_ISR_CODE)
- {
- IDEBUG(printk(CARD_DEBUG "CodReplIRQ\n",CARD));
- }
- if (estat & ZORAN_ISR_GIRQ0)
- {
- IDEBUG(printk(CARD_DEBUG "GIRQ0\n",CARD));
- if (!ztv->card->usegirq1)
- reap_states(ztv);
- }
- if (estat & ZORAN_ISR_GIRQ1)
- {
- IDEBUG(printk(CARD_DEBUG "GIRQ1\n",CARD));
- if (ztv->card->usegirq1)
- reap_states(ztv);
- }
-
- count++;
- if (count > 10)
- printk(CARD_ERR "irq loop %d (%x)\n",CARD,count,estat);
- if (count > 20)
- {
- zrwrite(0, ZORAN_ICR);
- printk(CARD_ERR "IRQ lockup, cleared int mask\n",CARD);
- }
- }
-}
-
-static
-int zoran_muxsel(struct zoran* ztv, int channel, int norm)
-{
- int rv;
-
- /* set the new video norm */
- rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_NORM, &norm);
- if (rv)
- return rv;
- ztv->norm = norm;
-
- /* map the given channel to the cards decoder's channel */
- channel = ztv->card->video_mux[channel] & CHANNEL_MASK;
-
- /* set the new channel */
- rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_INPUT, &channel);
- return rv;
-}
-
-/* Tell the interrupt handler what to to. */
-static
-void zoran_cap(struct zoran* ztv, int on)
-{
-DEBUG(printk(CARD_DEBUG "zoran_cap(%d) state=%x\n",CARD,on,ztv->state));
-
- if (on) {
- ztv->running = 1;
-
- /*
- * turn interrupts (back) on. The DMA will be enabled
- * inside the irq handler when it detects a restart.
- */
- zror(ZORAN_ICR_EN,ZORAN_ICR);
- }
- else {
- /*
- * turn both interrupts and DMA off
- */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
-
- ztv->running = 0;
- }
-}
-
-static ulong dmask[] = {
- 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFC, 0xFFFFFFF8,
- 0xFFFFFFF0, 0xFFFFFFE0, 0xFFFFFFC0, 0xFFFFFF80,
- 0xFFFFFF00, 0xFFFFFE00, 0xFFFFFC00, 0xFFFFF800,
- 0xFFFFF000, 0xFFFFE000, 0xFFFFC000, 0xFFFF8000,
- 0xFFFF0000, 0xFFFE0000, 0xFFFC0000, 0xFFF80000,
- 0xFFF00000, 0xFFE00000, 0xFFC00000, 0xFF800000,
- 0xFF000000, 0xFE000000, 0xFC000000, 0xF8000000,
- 0xF0000000, 0xE0000000, 0xC0000000, 0x80000000
-};
-
-static
-void zoran_built_overlay(struct zoran* ztv, int count, struct video_clip *vcp)
-{
- ulong* mtop;
- int ystep = (ztv->vidXshift + ztv->vidWidth+31)/32; /* next DWORD */
- int i;
-
-DEBUG(printk(KERN_DEBUG " overlay at %p, ystep=%d, clips=%d\n",ztv->overinfo.overlay,ystep,count));
-
- for (i=0; i<count; i++) {
- struct video_clip *vp = vcp+i;
- UNUSED(vp);
-DEBUG(printk(KERN_DEBUG " %d: clip(%d,%d,%d,%d)\n", i,vp->x,vp->y,vp->width,vp->height));
- }
-
- /*
- * activate the visible portion of the screen
- * Note we take some shortcuts here, because we
- * know the width can never be < 32. (I.e. a DWORD)
- * We also assume the overlay starts somewhere in
- * the FIRST dword.
- */
- {
- int start = ztv->vidXshift;
- ulong firstd = dmask[start];
- ulong lastd = ~dmask[(start + ztv->overinfo.w) & 31];
- mtop = ztv->overinfo.overlay;
- for (i=0; i<ztv->overinfo.h; i++) {
- int w = ztv->vidWidth;
- ulong* line = mtop;
- if (start & 31) {
- *line++ = firstd;
- w -= 32-(start&31);
- }
- memset(line, ~0, w/8);
- if (w & 31)
- line[w/32] = lastd;
- mtop += ystep;
- }
- }
-
- /* process clipping regions */
- for (i=0; i<count; i++) {
- int h;
- if (vcp->x < 0 || (uint)vcp->x > ztv->overinfo.w ||
- vcp->y < 0 || vcp->y > ztv->overinfo.h ||
- vcp->width < 0 || (uint)(vcp->x+vcp->width) > ztv->overinfo.w ||
- vcp->height < 0 || (vcp->y+vcp->height) > ztv->overinfo.h)
- {
- DEBUG(printk(CARD_DEBUG "invalid clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h));
- if (vcp->x < 0) vcp->x = 0;
- if ((uint)vcp->x > ztv->overinfo.w) vcp->x = ztv->overinfo.w;
- if (vcp->y < 0) vcp->y = 0;
- if (vcp->y > ztv->overinfo.h) vcp->y = ztv->overinfo.h;
- if (vcp->width < 0) vcp->width = 0;
- if ((uint)(vcp->x+vcp->width) > ztv->overinfo.w) vcp->width = ztv->overinfo.w - vcp->x;
- if (vcp->height < 0) vcp->height = 0;
- if (vcp->y+vcp->height > ztv->overinfo.h) vcp->height = ztv->overinfo.h - vcp->y;
-// continue;
- }
-
- mtop = &ztv->overinfo.overlay[vcp->y*ystep];
- for (h=0; h<=vcp->height; h++) {
- int w;
- int x = ztv->vidXshift + vcp->x;
- for (w=0; w<=vcp->width; w++) {
- clear_bit(x&31, &mtop[x/32]);
- x++;
- }
- mtop += ystep;
- }
- ++vcp;
- }
-
- mtop = ztv->overinfo.overlay;
- zrwrite(virt_to_bus(mtop), ZORAN_MTOP);
- zrwrite(virt_to_bus(mtop+ystep), ZORAN_MBOT);
- zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR);
-}
-
-struct tvnorm
-{
- u16 Wt, Wa, Ht, Ha, HStart, VStart;
-};
-
-static struct tvnorm tvnorms[] = {
- /* PAL-BDGHI */
-/* { 864, 720, 625, 576, 131, 21 },*/
-/*00*/ { 864, 768, 625, 576, 81, 17 },
- /* NTSC */
-/*01*/ { 858, 720, 525, 480, 121, 10 },
- /* SECAM */
-/*02*/ { 864, 720, 625, 576, 131, 21 },
- /* BW50 */
-/*03*/ { 864, 720, 625, 576, 131, 21 },
- /* BW60 */
-/*04*/ { 858, 720, 525, 480, 121, 10 }
-};
-#define TVNORMS (sizeof(tvnorms)/sizeof(tvnorm))
-
-/*
- * Program the chip for a setup as described in the vidinfo struct.
- *
- * Side-effects: calculates vidXshift, vidInterlace,
- * vidHeight, vidWidth which are used in a later stage
- * to calculate the overlay mask
- *
- * This is an internal function, as such it does not check the
- * validity of the struct members... Spectaculair crashes will
- * follow /very/ quick when you're wrong and the chip right :)
- */
-static
-void zoran_set_geo(struct zoran* ztv, struct vidinfo* i)
-{
- ulong top, bot;
- int stride;
- int winWidth, winHeight;
- int maxWidth, maxHeight, maxXOffset, maxYOffset;
- long vfec;
-
-DEBUG(printk(CARD_DEBUG "set_geo(rect=(%d,%d,%d,%d), norm=%d, format=%d, bpp=%d, bpl=%d, busadr=%lx, overlay=%p)\n",CARD,i->x,i->y,i->w,i->h,ztv->norm,i->format,i->bpp,i->bpl,i->busadr,i->overlay));
-
- /*
- * make sure the DMA transfers are inhibited during our
- * reprogramming of the chip
- */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
-
- maxWidth = tvnorms[ztv->norm].Wa;
- maxHeight = tvnorms[ztv->norm].Ha/2;
- maxXOffset = tvnorms[ztv->norm].HStart;
- maxYOffset = tvnorms[ztv->norm].VStart;
-
- /* setup vfec register (keep ExtFl,TopField and VCLKPol settings) */
- vfec = (zrread(ZORAN_VFEC) & (ZORAN_VFEC_EXTFL|ZORAN_VFEC_TOPFIELD|ZORAN_VFEC_VCLKPOL)) |
- (palette2fmt[i->format].mode & (ZORAN_VFEC_RGB|ZORAN_VFEC_ERRDIF|ZORAN_VFEC_LE|ZORAN_VFEC_PACK24));
-
- /*
- * Set top, bottom ptrs. Since these must be DWORD aligned,
- * possible adjust the x and the width of the window.
- * so the endposition stay the same. The vidXshift will make
- * sure we are not writing pixels before the requested x.
- */
- ztv->vidXshift = 0;
- winWidth = i->w;
- if (winWidth < 0)
- winWidth = -winWidth;
- top = i->busadr + i->x*i->bpp + i->y*i->bpl;
- if (top & 3) {
- ztv->vidXshift = (top & 3) / i->bpp;
- winWidth += ztv->vidXshift;
- DEBUG(printk(KERN_DEBUG " window-x shifted %d pixels left\n",ztv->vidXshift));
- top &= ~3;
- }
-
- /*
- * bottom points to next frame but in interleaved mode we want
- * to 'mix' the 2 frames to one capture, so 'bot' points to one
- * (physical) line below the top line.
- */
- bot = top + i->bpl;
- zrwrite(top,ZORAN_VTOP);
- zrwrite(bot,ZORAN_VBOT);
-
- /*
- * Make sure the winWidth is DWORD aligned too,
- * thereby automaticly making sure the stride to the
- * next line is DWORD aligned too (as required by spec).
- */
- if ((winWidth*i->bpp) & 3) {
-DEBUG(printk(KERN_DEBUG " window-width enlarged by %d pixels\n",(winWidth*i->bpp) & 3));
- winWidth += (winWidth*i->bpp) & 3;
- }
-
- /* determine the DispMode and stride */
- if (i->h >= 0 && i->h <= maxHeight) {
- /* single frame grab suffices for this height. */
- vfec |= ZORAN_VFEC_DISPMOD;
- ztv->vidInterlace = 0;
- stride = i->bpl - (winWidth*i->bpp);
- winHeight = i->h;
- }
- else {
- /* interleaving needed for this height */
- ztv->vidInterlace = 1;
- stride = i->bpl*2 - (winWidth*i->bpp);
- winHeight = i->h/2;
- }
- if (winHeight < 0) /* can happen for VBI! */
- winHeight = -winHeight;
-
- /* safety net, sometimes bpl is too short??? */
- if (stride<0) {
-DEBUG(printk(CARD_DEBUG "WARNING stride = %d\n",CARD,stride));
- stride = 0;
- }
-
- zraor((winHeight<<12)|(winWidth<<0),~(ZORAN_VDC_VIDWINHT|ZORAN_VDC_VIDWINWID), ZORAN_VDC);
- zraor(stride<<16,~ZORAN_VSTR_DISPSTRIDE,ZORAN_VSTR);
-
- /* remember vidWidth, vidHeight for overlay calculations */
- ztv->vidWidth = winWidth;
- ztv->vidHeight = winHeight;
-DEBUG(printk(KERN_DEBUG " top=%08lx, bottom=%08lx\n",top,bot));
-DEBUG(printk(KERN_DEBUG " winWidth=%d, winHeight=%d\n",winWidth,winHeight));
-DEBUG(printk(KERN_DEBUG " maxWidth=%d, maxHeight=%d\n",maxWidth,maxHeight));
-DEBUG(printk(KERN_DEBUG " stride=%d\n",stride));
-
- /*
- * determine horizontal scales and crops
- */
- if (i->w < 0) {
- int Hstart = 1;
- int Hend = Hstart + winWidth;
-DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Hstart, Hend));
- zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH);
- }
- else {
- int Wa = maxWidth;
- int X = (winWidth*64+Wa-1)/Wa;
- int We = winWidth*64/X;
- int HorDcm = 64-X;
- int hcrop1 = 2*(Wa-We)/4;
- /*
- * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi>
- * found the solution to the color phase shift.
- * See ChangeLog for the full explanation)
- */
- int Hstart = (maxXOffset + hcrop1) | 1;
- int Hend = Hstart + We - 1;
-
-DEBUG(printk(KERN_DEBUG " X: scale=%d, start=%d, end=%d\n", HorDcm, Hstart, Hend));
-
- zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH);
- vfec |= HorDcm<<14;
-
- if (HorDcm<16)
- vfec |= ZORAN_VFEC_HFILTER_1; /* no filter */
- else if (HorDcm<32)
- vfec |= ZORAN_VFEC_HFILTER_3; /* 3 tap filter */
- else if (HorDcm<48)
- vfec |= ZORAN_VFEC_HFILTER_4; /* 4 tap filter */
- else vfec |= ZORAN_VFEC_HFILTER_5; /* 5 tap filter */
- }
-
- /*
- * Determine vertical scales and crops
- *
- * when height is negative, we want to read starting at line 0
- * One day someone might need access to these lines...
- */
- if (i->h < 0) {
- int Vstart = 0;
- int Vend = Vstart + winHeight;
-DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Vstart, Vend));
- zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV);
- }
- else {
- int Ha = maxHeight;
- int Y = (winHeight*64+Ha-1)/Ha;
- int He = winHeight*64/Y;
- int VerDcm = 64-Y;
- int vcrop1 = 2*(Ha-He)/4;
- int Vstart = maxYOffset + vcrop1;
- int Vend = Vstart + He - 1;
-
-DEBUG(printk(KERN_DEBUG " Y: scale=%d, start=%d, end=%d\n", VerDcm, Vstart, Vend));
- zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV);
- vfec |= VerDcm<<8;
- }
-
-DEBUG(printk(KERN_DEBUG " F: format=%d(=%s)\n",i->format,palette2fmt[i->format].name));
-
- /* setup the requested format */
- zrwrite(vfec, ZORAN_VFEC);
-}
-
-static
-void zoran_common_open(struct zoran* ztv, int flags)
-{
- UNUSED(flags);
-
- /* already opened? */
- if (ztv->users++ != 0)
- return;
-
- /* unmute audio */
- /* /what/ audio? */
-
- ztv->state = 0;
-
- /* setup the encoder to the initial values */
- ztv->picture.colour=254<<7;
- ztv->picture.brightness=128<<8;
- ztv->picture.hue=128<<8;
- ztv->picture.contrast=216<<7;
- i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &ztv->picture);
-
- /* default to the composite input since my camera is there */
- zoran_muxsel(ztv, 0, VIDEO_MODE_PAL);
-}
-
-static
-void zoran_common_close(struct zoran* ztv)
-{
- if (--ztv->users != 0)
- return;
-
- /* mute audio */
- /* /what/ audio? */
-
- /* stop the chip */
- zoran_cap(ztv, 0);
-}
-
-/*
- * Open a zoran card. Right now the flags are just a hack
- */
-static int zoran_open(struct video_device *dev, int flags)
-{
- struct zoran *ztv = (struct zoran*)dev;
- struct vidinfo* item;
- char* pos;
-
- DEBUG(printk(CARD_DEBUG "open(dev,%d)\n",CARD,flags));
-
- /*********************************************
- * We really should be doing lazy allocing...
- *********************************************/
- /* allocate a frame buffer */
- if (!ztv->fbuffer)
- ztv->fbuffer = bmalloc(ZORAN_MAX_FBUFSIZE);
- if (!ztv->fbuffer) {
- /* could not get a buffer, bail out */
- return -ENOBUFS;
- }
- /* at this time we _always_ have a framebuffer */
- memset(ztv->fbuffer,0,ZORAN_MAX_FBUFSIZE);
-
- if (!ztv->overinfo.overlay)
- ztv->overinfo.overlay = kmalloc(1024*1024/8, GFP_KERNEL);
- if (!ztv->overinfo.overlay) {
- /* could not get an overlay buffer, bail out */
- bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
- return -ENOBUFS;
- }
- /* at this time we _always_ have a overlay */
-
- /* clear buffer status, and give them a DMAable address */
- pos = ztv->fbuffer;
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- {
- item->status = FBUFFER_FREE;
- item->memadr = pos;
- item->busadr = virt_to_bus(pos);
- pos += ZORAN_MAX_FBUFFER;
- }
-
- /* do the common part of all open's */
- zoran_common_open(ztv, flags);
-
- return 0;
-}
-
-static
-void zoran_close(struct video_device* dev)
-{
- struct zoran *ztv = (struct zoran*)dev;
-
- DEBUG(printk(CARD_DEBUG "close(dev)\n",CARD));
-
- /* driver specific closure */
- clear_bit(STATE_OVERLAY, &ztv->state);
-
- zoran_common_close(ztv);
-
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
-
- /* free the allocated framebuffer */
- bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
- ztv->fbuffer = 0;
- kfree(ztv->overinfo.overlay);
- ztv->overinfo.overlay = 0;
-
-}
-
-/*
- * This read function could be used reentrant in a SMP situation.
- *
- * This is made possible by the spinlock which is kept till we
- * found and marked a buffer for our own use. The lock must
- * be released as soon as possible to prevent lock contention.
- */
-static
-long zoran_read(struct video_device* dev, char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = (struct zoran*)dev;
- unsigned long max;
- struct vidinfo* unused = 0;
- struct vidinfo* done = 0;
-
- DEBUG(printk(CARD_DEBUG "zoran_read(%p,%ld,%d)\n",CARD,buf,count,nonblock));
-
- /* find ourself a free or completed buffer */
- for (;;) {
- struct vidinfo* item;
-
- write_lock_irq(&ztv->lock);
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- {
- if (!unused && item->status == FBUFFER_FREE)
- unused = item;
- if (!done && item->status == FBUFFER_DONE)
- done = item;
- }
- if (done || unused)
- break;
-
- /* no more free buffers, wait for them. */
- write_unlock_irq(&ztv->lock);
- if (nonblock)
- return -EWOULDBLOCK;
- interruptible_sleep_on(&ztv->grabq);
- if (signal_pending(current))
- return -EINTR;
- }
-
- /* Do we have 'ready' data? */
- if (!done) {
- /* no? than this will take a while... */
- if (nonblock) {
- write_unlock_irq(&ztv->lock);
- return -EWOULDBLOCK;
- }
-
- /* mark the unused buffer as wanted */
- unused->status = FBUFFER_BUSY;
- unused->w = 320;
- unused->h = 240;
- unused->format = VIDEO_PALETTE_RGB24;
- unused->bpp = palette2fmt[unused->format].bpp;
- unused->bpl = unused->w * unused->bpp;
- unused->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = unused;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = unused;
- }
- }
- write_unlock_irq(&ztv->lock);
-
- /* tell the state machine we want it filled /NOW/ */
- zoran_cap(ztv, 1);
-
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->grabq,
- (unused->status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- done = unused;
- }
- else
- write_unlock_irq(&ztv->lock);
-
- /* Yes! we got data! */
- max = done->bpl * done->h;
- if (count > max)
- count = max;
- if (copy_to_user((void*)buf, done->memadr, count))
- count = -EFAULT;
-
- /* keep the engine running */
- done->status = FBUFFER_FREE;
-// zoran_cap(ztv,1);
-
- /* tell listeners this buffer became free */
- wake_up_interruptible(&ztv->grabq);
-
- /* goodbye */
- DEBUG(printk(CARD_DEBUG "zoran_read() returns %lu\n",CARD,count));
- return count;
-}
-
-static
-long zoran_write(struct video_device* dev, const char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = (struct zoran *)dev;
- UNUSED(ztv); UNUSED(dev); UNUSED(buf); UNUSED(count); UNUSED(nonblock);
- DEBUG(printk(CARD_DEBUG "zoran_write\n",CARD));
- return -EINVAL;
-}
-
-static
-unsigned int zoran_poll(struct video_device *dev, struct file *file, poll_table *wait)
-{
- struct zoran *ztv = (struct zoran *)dev;
- struct vidinfo* item;
- unsigned int mask = 0;
-
- poll_wait(file, &ztv->grabq, wait);
-
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- if (item->status == FBUFFER_DONE)
- {
- mask |= (POLLIN | POLLRDNORM);
- break;
- }
-
- DEBUG(printk(CARD_DEBUG "zoran_poll()=%x\n",CARD,mask));
-
- return mask;
-}
-
-/* append a new clipregion to the vector of video_clips */
-static
-void new_clip(struct video_window* vw, struct video_clip* vcp, int x, int y, int w, int h)
-{
- vcp[vw->clipcount].x = x;
- vcp[vw->clipcount].y = y;
- vcp[vw->clipcount].width = w;
- vcp[vw->clipcount].height = h;
- vw->clipcount++;
-}
-
-static
-int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg)
-{
- struct zoran* ztv = (struct zoran*)dev;
-
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability c;
- DEBUG(printk(CARD_DEBUG "VIDIOCGCAP\n",CARD));
-
- strcpy(c.name,ztv->video_dev.name);
- c.type = VID_TYPE_CAPTURE|
- VID_TYPE_OVERLAY|
- VID_TYPE_CLIPPING|
- VID_TYPE_FRAMERAM|
- VID_TYPE_SCALES;
- if (ztv->have_tuner)
- c.type |= VID_TYPE_TUNER;
- if (pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))
- c.type &= ~VID_TYPE_OVERLAY;
- if (ztv->have_decoder) {
- c.channels = ztv->card->video_inputs;
- c.audios = ztv->card->audio_inputs;
- } else
- /* no decoder -> no channels */
- c.channels = c.audios = 0;
- c.maxwidth = 768;
- c.maxheight = 576;
- c.minwidth = 32;
- c.minheight = 32;
- if (copy_to_user(arg,&c,sizeof(c)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGCHAN:
- {
- struct video_channel v;
- int mux;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGCHAN(%d)\n",CARD,v.channel));
- v.flags=VIDEO_VC_AUDIO
-#ifdef VIDEO_VC_NORM
- |VIDEO_VC_NORM
-#endif
- ;
- v.tuners=0;
- v.type=VIDEO_TYPE_CAMERA;
-#ifdef I_EXPECT_POSSIBLE_NORMS_IN_THE_API
- v.norm=VIDEO_MODE_PAL|
- VIDEO_MODE_NTSC|
- VIDEO_MODE_SECAM;
-#else
- v.norm=VIDEO_MODE_PAL;
-#endif
- /* too many inputs? no decoder -> no channels */
- if (!ztv->have_decoder || v.channel < 0 || v.channel >= ztv->card->video_inputs)
- return -EINVAL;
-
- /* now determine the name of the channel */
- mux = ztv->card->video_mux[v.channel];
- if (mux & IS_TUNER) {
- /* lets assume only one tuner, yes? */
- strcpy(v.name,"Television");
- v.type = VIDEO_TYPE_TV;
- if (ztv->have_tuner) {
- v.flags |= VIDEO_VC_TUNER;
- v.tuners = 1;
- }
- }
- else if (mux & IS_SVHS)
- sprintf(v.name,"S-Video-%d",v.channel);
- else
- sprintf(v.name,"CVBS-%d",v.channel);
-
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSCHAN:
- { /* set video channel */
- struct video_channel v;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSCHAN(%d,%d)\n",CARD,v.channel,v.norm));
-
- /* too many inputs? no decoder -> no channels */
- if (!ztv->have_decoder || v.channel >= ztv->card->video_inputs || v.channel < 0)
- return -EINVAL;
-
- if (v.norm != VIDEO_MODE_PAL &&
- v.norm != VIDEO_MODE_NTSC &&
- v.norm != VIDEO_MODE_SECAM &&
- v.norm != VIDEO_MODE_AUTO)
- return -EOPNOTSUPP;
-
- /* make it happen, nr1! */
- return zoran_muxsel(ztv,v.channel,v.norm);
- }
-
- case VIDIOCGTUNER:
- {
- struct video_tuner v;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGTUNER(%d)\n",CARD,v.tuner));
-
- /* Only no or one tuner for now */
- if (!ztv->have_tuner || v.tuner)
- return -EINVAL;
-
- strcpy(v.name,"Television");
- v.rangelow = 0;
- v.rangehigh = ~0;
- v.flags = VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM;
- v.mode = ztv->norm;
- v.signal = 0xFFFF; /* unknown */
-
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner v;
- if (copy_from_user(&v, arg, sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSTUNER(%d,%d)\n",CARD,v.tuner,v.mode));
-
- /* Only no or one tuner for now */
- if (!ztv->have_tuner || v.tuner)
- return -EINVAL;
-
- /* and it only has certain valid modes */
- if( v.mode != VIDEO_MODE_PAL &&
- v.mode != VIDEO_MODE_NTSC &&
- v.mode != VIDEO_MODE_SECAM)
- return -EOPNOTSUPP;
-
- /* engage! */
- return zoran_muxsel(ztv,v.tuner,v.mode);
- }
-
- case VIDIOCGPICT:
- {
- struct video_picture p = ztv->picture;
- DEBUG(printk(CARD_DEBUG "VIDIOCGPICT\n",CARD));
- p.depth = ztv->depth;
- switch (p.depth) {
- case 8: p.palette=VIDEO_PALETTE_YUV422;
- break;
- case 15: p.palette=VIDEO_PALETTE_RGB555;
- break;
- case 16: p.palette=VIDEO_PALETTE_RGB565;
- break;
- case 24: p.palette=VIDEO_PALETTE_RGB24;
- break;
- case 32: p.palette=VIDEO_PALETTE_RGB32;
- break;
- }
- if (copy_to_user(arg, &p, sizeof(p)))
- return -EFAULT;
- break;
- }
- case VIDIOCSPICT:
- {
- struct video_picture p;
- if (copy_from_user(&p, arg,sizeof(p)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSPICT(%d,%d,%d,%d,%d,%d,%d)\n",CARD,p.brightness,p.hue,p.colour,p.contrast,p.whiteness,p.depth,p.palette));
-
- /* depth must match with framebuffer */
- if (p.depth != ztv->depth)
- return -EINVAL;
-
- /* check if palette matches this bpp */
- if (p.palette>NRPALETTES ||
- palette2fmt[p.palette].bpp != ztv->overinfo.bpp)
- return -EINVAL;
-
- write_lock_irq(&ztv->lock);
- ztv->overinfo.format = p.palette;
- ztv->picture = p;
- write_unlock_irq(&ztv->lock);
-
- /* tell the decoder */
- i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &p);
- break;
- }
-
- case VIDIOCGWIN:
- {
- struct video_window vw;
- DEBUG(printk(CARD_DEBUG "VIDIOCGWIN\n",CARD));
- read_lock(&ztv->lock);
- vw.x = ztv->overinfo.x;
- vw.y = ztv->overinfo.y;
- vw.width = ztv->overinfo.w;
- vw.height = ztv->overinfo.h;
- vw.chromakey= 0;
- vw.flags = 0;
- if (ztv->vidInterlace)
- vw.flags|=VIDEO_WINDOW_INTERLACE;
- read_unlock(&ztv->lock);
- if (copy_to_user(arg,&vw,sizeof(vw)))
- return -EFAULT;
- break;
- }
- case VIDIOCSWIN:
- {
- struct video_window vw;
- struct video_clip *vcp;
- int on;
- if (copy_from_user(&vw,arg,sizeof(vw)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSWIN(%d,%d,%d,%d,%x,%d)\n",CARD,vw.x,vw.y,vw.width,vw.height,vw.flags,vw.clipcount));
-
- if (vw.flags)
- return -EINVAL;
-
- if (vw.clipcount <0 || vw.clipcount>256)
- return -EDOM; /* Too many! */
-
- /*
- * Do any clips.
- */
- vcp = vmalloc(sizeof(struct video_clip)*(vw.clipcount+4));
- if (vcp==NULL)
- return -ENOMEM;
- if (vw.clipcount && copy_from_user(vcp,vw.clips,sizeof(struct video_clip)*vw.clipcount)) {
- vfree(vcp);
- return -EFAULT;
- }
-
- on = ztv->running;
- if (on)
- zoran_cap(ztv, 0);
-
- /*
- * strange, it seems xawtv sometimes calls us with 0
- * width and/or height. Ignore these values
- */
- if (vw.x == 0)
- vw.x = ztv->overinfo.x;
- if (vw.y == 0)
- vw.y = ztv->overinfo.y;
-
- /* by now we are committed to the new data... */
- write_lock_irq(&ztv->lock);
- ztv->overinfo.x = vw.x;
- ztv->overinfo.y = vw.y;
- ztv->overinfo.w = vw.width;
- ztv->overinfo.h = vw.height;
- write_unlock_irq(&ztv->lock);
-
- /*
- * Impose display clips
- */
- if (vw.x+vw.width > ztv->swidth)
- new_clip(&vw, vcp, ztv->swidth-vw.x, 0, vw.width-1, vw.height-1);
- if (vw.y+vw.height > ztv->sheight)
- new_clip(&vw, vcp, 0, ztv->sheight-vw.y, vw.width-1, vw.height-1);
-
- /* built the requested clipping zones */
- zoran_set_geo(ztv, &ztv->overinfo);
- zoran_built_overlay(ztv, vw.clipcount, vcp);
- vfree(vcp);
-
- /* if we were on, restart the video engine */
- if (on)
- zoran_cap(ztv, 1);
- break;
- }
-
- case VIDIOCCAPTURE:
- {
- int v;
- if (get_user(v, (int *)arg))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCCAPTURE(%d)\n",CARD,v));
-
- if (v==0) {
- clear_bit(STATE_OVERLAY, &ztv->state);
- zoran_cap(ztv, 1);
- }
- else {
- /* is VIDIOCSFBUF, VIDIOCSWIN done? */
- if (ztv->overinfo.busadr==0 || ztv->overinfo.w==0 || ztv->overinfo.h==0)
- return -EINVAL;
-
- set_bit(STATE_OVERLAY, &ztv->state);
- zoran_cap(ztv, 1);
- }
- break;
- }
-
- case VIDIOCGFBUF:
- {
- struct video_buffer v;
- DEBUG(printk(CARD_DEBUG "VIDIOCGFBUF\n",CARD));
- read_lock(&ztv->lock);
- v.base = (void *)ztv->overinfo.busadr;
- v.height = ztv->sheight;
- v.width = ztv->swidth;
- v.depth = ztv->depth;
- v.bytesperline = ztv->overinfo.bpl;
- read_unlock(&ztv->lock);
- if(copy_to_user(arg, &v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSFBUF:
- {
- struct video_buffer v;
- if(!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (pcipci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))
- return -ENXIO;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSFBUF(%p,%d,%d,%d,%d)\n",CARD,v.base, v.width,v.height,v.depth,v.bytesperline));
-
- if (v.depth!=15 && v.depth!=16 && v.depth!=24 && v.depth!=32)
- return -EINVAL;
- if (v.bytesperline<1)
- return -EINVAL;
- if (ztv->running)
- return -EBUSY;
- write_lock_irq(&ztv->lock);
- ztv->overinfo.busadr = (ulong)v.base;
- ztv->sheight = v.height;
- ztv->swidth = v.width;
- ztv->depth = v.depth; /* bits per pixel */
- ztv->overinfo.bpp = ((v.depth+1)&0x38)/8;/* bytes per pixel */
- ztv->overinfo.bpl = v.bytesperline; /* bytes per line */
- write_unlock_irq(&ztv->lock);
- break;
- }
-
- case VIDIOCKEY:
- {
- /* Will be handled higher up .. */
- break;
- }
-
- case VIDIOCSYNC:
- {
- int i;
- if (get_user(i, (int *) arg))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d)\n",CARD,i));
- if (i<0 || i>ZORAN_MAX_FBUFFERS)
- return -EINVAL;
- switch (ztv->grabinfo[i].status) {
- case FBUFFER_FREE:
- return -EINVAL;
- case FBUFFER_BUSY:
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->grabq,
- (ztv->grabinfo[i].status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- /* don't fall through; a DONE buffer is not UNUSED */
- break;
- case FBUFFER_DONE:
- ztv->grabinfo[i].status = FBUFFER_FREE;
- /* tell ppl we have a spare buffer */
- wake_up_interruptible(&ztv->grabq);
- break;
- }
- DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d) returns\n",CARD,i));
- break;
- }
-
- case VIDIOCMCAPTURE:
- {
- struct video_mmap vm;
- struct vidinfo* frame;
- if (copy_from_user(&vm,arg,sizeof(vm)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCMCAPTURE(%d,(%d,%d),%d)\n",CARD,vm.frame,vm.width,vm.height,vm.format));
- if (vm.frame<0 || vm.frame>ZORAN_MAX_FBUFFERS ||
- vm.width<32 || vm.width>768 ||
- vm.height<32 || vm.height>576 ||
- vm.format>NRPALETTES ||
- palette2fmt[vm.format].mode == 0)
- return -EINVAL;
-
- /* we are allowed to take over UNUSED and DONE buffers */
- frame = &ztv->grabinfo[vm.frame];
- if (frame->status == FBUFFER_BUSY)
- return -EBUSY;
-
- /* setup the other parameters if they are given */
- write_lock_irq(&ztv->lock);
- frame->w = vm.width;
- frame->h = vm.height;
- frame->format = vm.format;
- frame->bpp = palette2fmt[frame->format].bpp;
- frame->bpl = frame->w*frame->bpp;
- frame->status = FBUFFER_BUSY;
- frame->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = frame;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = frame;
- }
- }
- write_unlock_irq(&ztv->lock);
- zoran_cap(ztv, 1);
- break;
- }
-
- case VIDIOCGMBUF:
- {
- struct video_mbuf mb;
- int i;
- DEBUG(printk(CARD_DEBUG "VIDIOCGMBUF\n",CARD));
- mb.size = ZORAN_MAX_FBUFSIZE;
- mb.frames = ZORAN_MAX_FBUFFERS;
- for (i=0; i<ZORAN_MAX_FBUFFERS; i++)
- mb.offsets[i] = i*ZORAN_MAX_FBUFFER;
- if(copy_to_user(arg, &mb,sizeof(mb)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGUNIT:
- {
- struct video_unit vu;
- DEBUG(printk(CARD_DEBUG "VIDIOCGUNIT\n",CARD));
- vu.video = ztv->video_dev.minor;
- vu.vbi = ztv->vbi_dev.minor;
- vu.radio = VIDEO_NO_UNIT;
- vu.audio = VIDEO_NO_UNIT;
- vu.teletext = VIDEO_NO_UNIT;
- if(copy_to_user(arg, &vu,sizeof(vu)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGFREQ:
- {
- unsigned long v = ztv->tuner_freq;
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGFREQ\n",CARD));
- break;
- }
- case VIDIOCSFREQ:
- {
- unsigned long v;
- if (copy_from_user(&v, arg, sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSFREQ\n",CARD));
-
- if (ztv->have_tuner) {
- int fixme = v;
- if (i2c_control_device(&(ztv->i2c), I2C_DRIVERID_TUNER, TUNER_SET_TVFREQ, &fixme) < 0)
- return -EAGAIN;
- }
- ztv->tuner_freq = v;
- break;
- }
-
- /* Why isn't this in the API?
- * And why doesn't it take a buffer number?
- case BTTV_FIELDNR:
- {
- unsigned long v = ztv->lastfieldnr;
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "BTTV_FIELDNR\n",CARD));
- break;
- }
- */
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static
-int zoran_mmap(struct vm_area_struct *vma, struct video_device* dev, const char* adr, unsigned long size)
-{
- struct zoran* ztv = (struct zoran*)dev;
- unsigned long start = (unsigned long)adr;
- unsigned long pos;
-
- DEBUG(printk(CARD_DEBUG "zoran_mmap(0x%p,%ld)\n",CARD,adr,size));
-
- /* sanity checks */
- if (size > ZORAN_MAX_FBUFSIZE || !ztv->fbuffer)
- return -EINVAL;
-
- /* start mapping the whole shabang to user memory */
- pos = (unsigned long)ztv->fbuffer;
- while (size>0) {
- unsigned long pfn = virt_to_phys((void*)pos) >> PAGE_SHIFT;
- if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
- return -EAGAIN;
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- return 0;
-}
-
-static struct video_device zr36120_template=
-{
- .owner = THIS_MODULE,
- .name = "UNSET",
- .type = VID_TYPE_TUNER|VID_TYPE_CAPTURE|VID_TYPE_OVERLAY,
- .hardware = VID_HARDWARE_ZR36120,
- .open = zoran_open,
- .close = zoran_close,
- .read = zoran_read,
- .write = zoran_write,
- .poll = zoran_poll,
- .ioctl = zoran_ioctl,
- .compat_ioctl = v4l_compat_ioctl32,
- .mmap = zoran_mmap,
- .minor = -1,
-};
-
-static
-int vbi_open(struct video_device *dev, int flags)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
-
- DEBUG(printk(CARD_DEBUG "vbi_open(dev,%d)\n",CARD,flags));
-
- /*
- * During VBI device open, we continiously grab VBI-like
- * data in the vbi buffer when we have nothing to do.
- * Only when there is an explicit request for VBI data
- * (read call) we /force/ a read.
- */
-
- /* allocate buffers */
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- {
- item->status = FBUFFER_FREE;
-
- /* alloc */
- if (!item->memadr) {
- item->memadr = bmalloc(ZORAN_VBI_BUFSIZE);
- if (!item->memadr) {
- /* could not get a buffer, bail out */
- while (item != ztv->readinfo) {
- item--;
- bfree(item->memadr, ZORAN_VBI_BUFSIZE);
- item->memadr = 0;
- item->busadr = 0;
- }
- return -ENOBUFS;
- }
- }
-
- /* determine the DMAable address */
- item->busadr = virt_to_bus(item->memadr);
- }
-
- /* do the common part of all open's */
- zoran_common_open(ztv, flags);
-
- set_bit(STATE_VBI, &ztv->state);
- /* start read-ahead */
- zoran_cap(ztv, 1);
-
- return 0;
-}
-
-static
-void vbi_close(struct video_device *dev)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
-
- DEBUG(printk(CARD_DEBUG "vbi_close(dev)\n",CARD));
-
- /* driver specific closure */
- clear_bit(STATE_VBI, &ztv->state);
-
- zoran_common_close(ztv);
-
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
-
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- {
- if (item->memadr)
- bfree(item->memadr, ZORAN_VBI_BUFSIZE);
- item->memadr = 0;
- }
-
-}
-
-/*
- * This read function could be used reentrant in a SMP situation.
- *
- * This is made possible by the spinlock which is kept till we
- * found and marked a buffer for our own use. The lock must
- * be released as soon as possible to prevent lock contention.
- */
-static
-long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = dev->priv;
- unsigned long max;
- struct vidinfo* unused = 0;
- struct vidinfo* done = 0;
-
- DEBUG(printk(CARD_DEBUG "vbi_read(0x%p,%ld,%d)\n",CARD,buf,count,nonblock));
-
- /* find ourself a free or completed buffer */
- for (;;) {
- struct vidinfo* item;
-
- write_lock_irq(&ztv->lock);
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) {
- if (!unused && item->status == FBUFFER_FREE)
- unused = item;
- if (!done && item->status == FBUFFER_DONE)
- done = item;
- }
- if (done || unused)
- break;
-
- /* no more free buffers, wait for them. */
- write_unlock_irq(&ztv->lock);
- if (nonblock)
- return -EWOULDBLOCK;
- interruptible_sleep_on(&ztv->vbiq);
- if (signal_pending(current))
- return -EINTR;
- }
-
- /* Do we have 'ready' data? */
- if (!done) {
- /* no? than this will take a while... */
- if (nonblock) {
- write_unlock_irq(&ztv->lock);
- return -EWOULDBLOCK;
- }
-
- /* mark the unused buffer as wanted */
- unused->status = FBUFFER_BUSY;
- unused->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = unused;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = unused;
- }
- }
- write_unlock_irq(&ztv->lock);
-
- /* tell the state machine we want it filled /NOW/ */
- zoran_cap(ztv, 1);
-
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->vbiq,
- (unused->status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- done = unused;
- }
- else
- write_unlock_irq(&ztv->lock);
-
- /* Yes! we got data! */
- max = done->bpl * -done->h;
- if (count > max)
- count = max;
-
- /* check if the user gave us enough room to write the data */
- if (!access_ok(VERIFY_WRITE, buf, count)) {
- count = -EFAULT;
- goto out;
- }
-
- /*
- * Now transform/strip the data from YUV to Y-only
- * NB. Assume the Y is in the LSB of the YUV data.
- */
- {
- unsigned char* optr = buf;
- unsigned char* eptr = buf+count;
-
- /* are we beeing accessed from an old driver? */
- if (count == 2*19*2048) {
- /*
- * Extreme HACK, old VBI programs expect 2048 points
- * of data, and we only got 864 orso. Double each
- * datapoint and clear the rest of the line.
- * This way we have appear to have a
- * sample_frequency of 29.5 Mc.
- */
- int x,y;
- unsigned char* iptr = done->memadr+1;
- for (y=done->h; optr<eptr && y<0; y++)
- {
- /* copy to doubled data to userland */
- for (x=0; optr+1<eptr && x<-done->w; x++)
- {
- unsigned char a = iptr[x*2];
- __put_user(a, optr++);
- __put_user(a, optr++);
- }
- /* and clear the rest of the line */
- for (x*=2; optr<eptr && x<done->bpl; x++)
- __put_user(0, optr++);
- /* next line */
- iptr += done->bpl;
- }
- }
- else {
- /*
- * Other (probably newer) programs asked
- * us what geometry we are using, and are
- * reading the correct size.
- */
- int x,y;
- unsigned char* iptr = done->memadr+1;
- for (y=done->h; optr<eptr && y<0; y++)
- {
- /* copy to doubled data to userland */
- for (x=0; optr<eptr && x<-done->w; x++)
- __put_user(iptr[x*2], optr++);
- /* and clear the rest of the line */
- for (;optr<eptr && x<done->bpl; x++)
- __put_user(0, optr++);
- /* next line */
- iptr += done->bpl;
- }
- }
-
- /* API compliance:
- * place the framenumber (half fieldnr) in the last long
- */
- __put_user(done->fieldnr/2, ((ulong*)eptr)[-1]);
- }
-
- /* keep the engine running */
- done->status = FBUFFER_FREE;
- zoran_cap(ztv, 1);
-
- /* tell listeners this buffer just became free */
- wake_up_interruptible(&ztv->vbiq);
-
- /* goodbye */
-out:
- DEBUG(printk(CARD_DEBUG "vbi_read() returns %lu\n",CARD,count));
- return count;
-}
-
-static
-unsigned int vbi_poll(struct video_device *dev, struct file *file, poll_table *wait)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
- unsigned int mask = 0;
-
- poll_wait(file, &ztv->vbiq, wait);
-
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- if (item->status == FBUFFER_DONE)
- {
- mask |= (POLLIN | POLLRDNORM);
- break;
- }
-
- DEBUG(printk(CARD_DEBUG "vbi_poll()=%x\n",CARD,mask));
-
- return mask;
-}
-
-static
-int vbi_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
-{
- struct zoran* ztv = dev->priv;
-
- switch (cmd) {
- case VIDIOCGVBIFMT:
- {
- struct vbi_format f;
- DEBUG(printk(CARD_DEBUG "VIDIOCGVBIINFO\n",CARD));
- f.sampling_rate = 14750000UL;
- f.samples_per_line = -ztv->readinfo[0].w;
- f.sample_format = VIDEO_PALETTE_RAW;
- f.start[0] = f.start[1] = ztv->readinfo[0].y;
- f.start[1] += 312;
- f.count[0] = f.count[1] = -ztv->readinfo[0].h;
- f.flags = VBI_INTERLACED;
- if (copy_to_user(arg,&f,sizeof(f)))
- return -EFAULT;
- break;
- }
- case VIDIOCSVBIFMT:
- {
- struct vbi_format f;
- int i;
- if (copy_from_user(&f, arg,sizeof(f)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSVBIINFO(%d,%d,%d,%d,%d,%d,%d,%x)\n",CARD,f.sampling_rate,f.samples_per_line,f.sample_format,f.start[0],f.start[1],f.count[0],f.count[1],f.flags));
-
- /* lots of parameters are fixed... (PAL) */
- if (f.sampling_rate != 14750000UL ||
- f.samples_per_line > 864 ||
- f.sample_format != VIDEO_PALETTE_RAW ||
- f.start[0] < 0 ||
- f.start[0] != f.start[1]-312 ||
- f.count[0] != f.count[1] ||
- f.start[0]+f.count[0] >= 288 ||
- f.flags != VBI_INTERLACED)
- return -EINVAL;
-
- write_lock_irq(&ztv->lock);
- ztv->readinfo[0].y = f.start[0];
- ztv->readinfo[0].w = -f.samples_per_line;
- ztv->readinfo[0].h = -f.count[0];
- ztv->readinfo[0].bpl = f.samples_per_line*ztv->readinfo[0].bpp;
- for (i=1; i<ZORAN_VBI_BUFFERS; i++)
- ztv->readinfo[i] = ztv->readinfo[i];
- write_unlock_irq(&ztv->lock);
- break;
- }
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static struct video_device vbi_template=
-{
- .owner = THIS_MODULE,
- .name = "UNSET",
- .type = VID_TYPE_CAPTURE|VID_TYPE_TELETEXT,
- .hardware = VID_HARDWARE_ZR36120,
- .open = vbi_open,
- .close = vbi_close,
- .read = vbi_read,
- .write = zoran_write,
- .poll = vbi_poll,
- .ioctl = vbi_ioctl,
- .minor = -1,
-};
-
-/*
- * Scan for a Zoran chip, request the irq and map the io memory
- */
-static
-int __init find_zoran(void)
-{
- int result;
- struct zoran *ztv;
- struct pci_dev *dev = NULL;
- unsigned char revision;
- int zoran_num = 0;
-
- while ((dev = pci_get_device(PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, dev)))
- {
- /* Ok, a ZR36120/ZR36125 found! */
- ztv = &zorans[zoran_num];
- ztv->dev = dev;
-
- if (pci_enable_device(dev))
- continue;
-
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &revision);
- printk(KERN_INFO "zoran: Zoran %x (rev %d) ",
- dev->device, revision);
- printk("bus: %d, devfn: %d, irq: %d, ",
- dev->bus->number, dev->devfn, dev->irq);
- printk("memory: 0x%08lx.\n", ztv->zoran_adr);
-
- ztv->zoran_mem = ioremap(ztv->zoran_adr, 0x1000);
- DEBUG(printk(KERN_DEBUG "zoran: mapped-memory at 0x%p\n",ztv->zoran_mem));
-
- result = request_irq(dev->irq, zoran_irq,
- IRQF_SHARED|IRQF_DISABLED,"zoran", ztv);
- if (result==-EINVAL)
- {
- iounmap(ztv->zoran_mem);
- printk(KERN_ERR "zoran: Bad irq number or handler\n");
- continue;
- }
- if (result==-EBUSY)
- printk(KERN_ERR "zoran: IRQ %d busy, change your PnP config in BIOS\n",dev->irq);
- if (result < 0) {
- iounmap(ztv->zoran_mem);
- continue;
- }
- /* Enable bus-mastering */
- pci_set_master(dev);
- /* Keep a reference */
- pci_dev_get(dev);
- zoran_num++;
- }
- if(zoran_num)
- printk(KERN_INFO "zoran: %d Zoran card(s) found.\n",zoran_num);
- return zoran_num;
-}
-
-static
-int __init init_zoran(int card)
-{
- struct zoran *ztv = &zorans[card];
- int i;
-
- /* if the given cardtype valid? */
- if (cardtype[card]>=NRTVCARDS) {
- printk(KERN_INFO "invalid cardtype(%d) detected\n",cardtype[card]);
- return -1;
- }
-
- /* reset the zoran */
- zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
- zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
-
- /* zoran chip specific details */
- ztv->card = tvcards+cardtype[card]; /* point to the selected card */
- ztv->norm = 0; /* PAL */
- ztv->tuner_freq = 0;
-
- /* videocard details */
- ztv->swidth = 800;
- ztv->sheight = 600;
- ztv->depth = 16;
-
- /* State details */
- ztv->fbuffer = 0;
- ztv->overinfo.kindof = FBUFFER_OVERLAY;
- ztv->overinfo.status = FBUFFER_FREE;
- ztv->overinfo.x = 0;
- ztv->overinfo.y = 0;
- ztv->overinfo.w = 768; /* 640 */
- ztv->overinfo.h = 576; /* 480 */
- ztv->overinfo.format = VIDEO_PALETTE_RGB565;
- ztv->overinfo.bpp = palette2fmt[ztv->overinfo.format].bpp;
- ztv->overinfo.bpl = ztv->overinfo.bpp*ztv->swidth;
- ztv->overinfo.busadr = 0;
- ztv->overinfo.memadr = 0;
- ztv->overinfo.overlay = 0;
- for (i=0; i<ZORAN_MAX_FBUFFERS; i++) {
- ztv->grabinfo[i] = ztv->overinfo;
- ztv->grabinfo[i].kindof = FBUFFER_GRAB;
- }
- init_waitqueue_head(&ztv->grabq);
-
- /* VBI details */
- ztv->readinfo[0] = ztv->overinfo;
- ztv->readinfo[0].kindof = FBUFFER_VBI;
- ztv->readinfo[0].w = -864;
- ztv->readinfo[0].h = -38;
- ztv->readinfo[0].format = VIDEO_PALETTE_YUV422;
- ztv->readinfo[0].bpp = palette2fmt[ztv->readinfo[0].format].bpp;
- ztv->readinfo[0].bpl = 1024*ztv->readinfo[0].bpp;
- for (i=1; i<ZORAN_VBI_BUFFERS; i++)
- ztv->readinfo[i] = ztv->readinfo[0];
- init_waitqueue_head(&ztv->vbiq);
-
- /* maintenance data */
- ztv->have_decoder = 0;
- ztv->have_tuner = 0;
- ztv->tuner_type = 0;
- ztv->running = 0;
- ztv->users = 0;
- rwlock_init(&ztv->lock);
- ztv->workqueue = 0;
- ztv->fieldnr = 0;
- ztv->lastfieldnr = 0;
-
- if (triton1)
- zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC);
-
- /* external FL determines TOP frame */
- zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC);
-
- /* set HSpol */
- if (ztv->card->hsync_pos)
- zrwrite(ZORAN_VFEH_HSPOL, ZORAN_VFEH);
- /* set VSpol */
- if (ztv->card->vsync_pos)
- zrwrite(ZORAN_VFEV_VSPOL, ZORAN_VFEV);
-
- /* Set the proper General Purpuse register bits */
- /* implicit: no softreset, 0 waitstates */
- zrwrite(ZORAN_PCI_SOFTRESET|(ztv->card->gpdir<<0),ZORAN_PCI);
- /* implicit: 3 duration and recovery PCI clocks on guest 0-3 */
- zrwrite(ztv->card->gpval<<24,ZORAN_GUEST);
-
- /* clear interrupt status */
- zrwrite(~0, ZORAN_ISR);
-
- /*
- * i2c template
- */
- ztv->i2c = zoran_i2c_bus_template;
- sprintf(ztv->i2c.name,"zoran-%d",card);
- ztv->i2c.data = ztv;
-
- /*
- * Now add the template and register the device unit
- */
- ztv->video_dev = zr36120_template;
- strcpy(ztv->video_dev.name, ztv->i2c.name);
- ztv->video_dev.priv = ztv;
- if (video_register_device(&ztv->video_dev, VFL_TYPE_GRABBER, video_nr) < 0)
- return -1;
-
- ztv->vbi_dev = vbi_template;
- strcpy(ztv->vbi_dev.name, ztv->i2c.name);
- ztv->vbi_dev.priv = ztv;
- if (video_register_device(&ztv->vbi_dev, VFL_TYPE_VBI, vbi_nr) < 0) {
- video_unregister_device(&ztv->video_dev);
- return -1;
- }
- i2c_register_bus(&ztv->i2c);
-
- /* set interrupt mask - the PIN enable will be set later */
- zrwrite(ZORAN_ICR_GIRQ0|ZORAN_ICR_GIRQ1|ZORAN_ICR_CODE, ZORAN_ICR);
-
- printk(KERN_INFO "%s: installed %s\n",ztv->i2c.name,ztv->card->name);
- return 0;
-}
-
-static
-void release_zoran(int max)
-{
- struct zoran *ztv;
- int i;
-
- for (i=0;i<max; i++)
- {
- ztv = &zorans[i];
-
- /* turn off all capturing, DMA and IRQs */
- /* reset the zoran */
- zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
- zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
-
- /* first disable interrupts before unmapping the memory! */
- zrwrite(0, ZORAN_ICR);
- zrwrite(0xffffffffUL,ZORAN_ISR);
-
- /* free it */
- free_irq(ztv->dev->irq,ztv);
-
- /* unregister i2c_bus */
- i2c_unregister_bus((&ztv->i2c));
-
- /* unmap and free memory */
- if (ztv->zoran_mem)
- iounmap(ztv->zoran_mem);
-
- /* Drop PCI device */
- pci_dev_put(ztv->dev);
-
- video_unregister_device(&ztv->video_dev);
- video_unregister_device(&ztv->vbi_dev);
- }
-}
-
-void __exit zr36120_exit(void)
-{
- release_zoran(zoran_cards);
-}
-
-int __init zr36120_init(void)
-{
- int card;
-
- handle_chipset();
- zoran_cards = find_zoran();
- if (zoran_cards <= 0)
- return -EIO;
-
- /* initialize Zorans */
- for (card=0; card<zoran_cards; card++) {
- if (init_zoran(card) < 0) {
- /* only release the zorans we have registered */
- release_zoran(card);
- return -EIO;
- }
- }
- return 0;
-}
-
-module_init(zr36120_init);
-module_exit(zr36120_exit);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff