#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
/* The adm1021 registers */
/* Read-only */
-#define ADM1021_REG_TEMP 0x00
-#define ADM1021_REG_REMOTE_TEMP 0x01
+/* For nr in 0-1 */
+#define ADM1021_REG_TEMP(nr) (nr)
#define ADM1021_REG_STATUS 0x02
/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
#define ADM1021_REG_MAN_ID 0xFE
#define ADM1023_REG_REM_TOS_PREC 0x13
#define ADM1023_REG_REM_THYST_PREC 0x14
/* limits */
-#define ADM1021_REG_TOS_R 0x05
-#define ADM1021_REG_TOS_W 0x0B
-#define ADM1021_REG_REMOTE_TOS_R 0x07
-#define ADM1021_REG_REMOTE_TOS_W 0x0D
-#define ADM1021_REG_THYST_R 0x06
-#define ADM1021_REG_THYST_W 0x0C
-#define ADM1021_REG_REMOTE_THYST_R 0x08
-#define ADM1021_REG_REMOTE_THYST_W 0x0E
+/* For nr in 0-1 */
+#define ADM1021_REG_TOS_R(nr) (0x05 + 2 * (nr))
+#define ADM1021_REG_TOS_W(nr) (0x0B + 2 * (nr))
+#define ADM1021_REG_THYST_R(nr) (0x06 + 2 * (nr))
+#define ADM1021_REG_THYST_W(nr) (0x0C + 2 * (nr))
/* write-only */
#define ADM1021_REG_ONESHOT 0x0F
-
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
-/* Conversions note: 1021 uses normal integer signed-byte format*/
-#define TEMP_TO_REG(val) SENSORS_LIMIT((val) / 1000, -128, 127)
-
/* Initial values */
/* Note: Even though I left the low and high limits named os and hyst,
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- s8 temp_max; /* Register values */
- s8 temp_hyst;
- s8 temp_input;
- s8 remote_temp_max;
- s8 remote_temp_hyst;
- s8 remote_temp_input;
- u8 alarms;
- /* Special values for ADM1023 only */
- u8 remote_temp_prec;
- u8 remote_temp_os_prec;
- u8 remote_temp_hyst_prec;
- u8 remote_temp_offset;
- u8 remote_temp_offset_prec;
+ s8 temp_max[2]; /* Register values */
+ s8 temp_min[2];
+ s8 temp[2];
+ u8 alarms;
+ /* Special values for ADM1023 only */
+ u8 remote_temp_prec;
+ u8 remote_temp_os_prec;
+ u8 remote_temp_hyst_prec;
+ u8 remote_temp_offset;
+ u8 remote_temp_offset_prec;
};
static int adm1021_attach_adapter(struct i2c_adapter *adapter);
.detach_client = adm1021_detach_client,
};
-#define show(value) \
-static ssize_t show_##value(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct adm1021_data *data = adm1021_update_device(dev); \
- return sprintf(buf, "%d\n", 1000 * data->value); \
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp[index]);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp_max[index]);
+}
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp_min[index]);
}
-show(temp_max);
-show(temp_hyst);
-show(temp_input);
-show(remote_temp_max);
-show(remote_temp_hyst);
-show(remote_temp_input);
static ssize_t show_alarms(struct device *dev,
struct device_attribute *attr,
return sprintf(buf, "%u\n", data->alarms);
}
-#define set(value, reg) \
-static ssize_t set_##value(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1021_data *data = i2c_get_clientdata(client); \
- long temp = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->value = TEMP_TO_REG(temp); \
- if (!read_only) \
- i2c_smbus_write_byte_data(client, reg, data->value); \
- mutex_unlock(&data->update_lock); \
- return count; \
+static ssize_t set_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1021_data *data = i2c_get_clientdata(client);
+ long temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[index] = SENSORS_LIMIT(temp, -128, 127);
+ if (!read_only)
+ i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
+ data->temp_max[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
}
-set(temp_max, ADM1021_REG_TOS_W);
-set(temp_hyst, ADM1021_REG_THYST_W);
-set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
-set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
-
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
-static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t set_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1021_data *data = i2c_get_clientdata(client);
+ long temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[index] = SENSORS_LIMIT(temp, -128, 127);
+ if (!read_only)
+ i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
+ data->temp_min[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 1);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static int adm1021_attach_adapter(struct i2c_adapter *adapter)
{
}
static struct attribute *adm1021_attributes[] = {
- &dev_attr_temp1_max.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp2_min.attr,
- &dev_attr_temp2_input.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
&dev_attr_alarms.attr,
NULL
};
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
+ int i;
+
dev_dbg(&client->dev, "Starting adm1021 update\n");
- data->temp_input = i2c_smbus_read_byte_data(client,
- ADM1021_REG_TEMP);
- data->temp_max = i2c_smbus_read_byte_data(client,
- ADM1021_REG_TOS_R);
- data->temp_hyst = i2c_smbus_read_byte_data(client,
- ADM1021_REG_THYST_R);
- data->remote_temp_input = i2c_smbus_read_byte_data(client,
- ADM1021_REG_REMOTE_TEMP);
- data->remote_temp_max = i2c_smbus_read_byte_data(client,
- ADM1021_REG_REMOTE_TOS_R);
- data->remote_temp_hyst = i2c_smbus_read_byte_data(client,
- ADM1021_REG_REMOTE_THYST_R);
+ for (i = 0; i < 2; i++) {
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_TEMP(i));
+ data->temp_max[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_TOS_R(i));
+ data->temp_min[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_THYST_R(i));
+ }
data->alarms = i2c_smbus_read_byte_data(client,
ADM1021_REG_STATUS) & 0x7c;
if (data->type == adm1023) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff