i2c-au1550: Fix a misused register problem

Fix a "mis-used register" problem on the AMD MIPS Alchemy au1550
I2C interface.

In summary, the programmable serial controller seems to hang the kernel
when I send a single 'address' byte on the I2C bus.  The patch
essentially uses the PSC_SMBSTAT register's TE (transmit FIFO empty)
bit to check when the transmit FIFO is empty, instead of using the
PSC_SMBEVNT register's TU (transmit underflow) bit.  Using the TE bit
fixed the hang problem.

Signed-off-by: Chris David <cd@chrisdavid.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index d7e7c35..2f68416 100644 (file)
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -48,17 +48,14 @@ wait_xfer_done(struct i2c_au1550_data *adap)
 
        sp = (volatile psc_smb_t *)(adap->psc_base);
 
-       /* Wait for Tx FIFO Underflow.
+       /* Wait for Tx Buffer Empty
        */
        for (i = 0; i < adap->xfer_timeout; i++) {
-               stat = sp->psc_smbevnt;
+               stat = sp->psc_smbstat;
                au_sync();
-               if ((stat & PSC_SMBEVNT_TU) != 0) {
-                       /* Clear it.  */
-                       sp->psc_smbevnt = PSC_SMBEVNT_TU;
-                       au_sync();
+               if ((stat & PSC_SMBSTAT_TE) != 0)
                        return 0;
-               }
+
                udelay(1);
        }