* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.11
+ * mpi2_cnfg.h Version: 02.00.12
*
* Version History
* ---------------
* Added expander reduced functionality data to SAS
* Expander Page 0.
* Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09 02.00.12 Added IO Unit Page 7.
+ * Added new device ids.
+ * Added SAS IO Unit Page 5.
+ * Added partial and slumber power management capable flags
+ * to SAS Device Page 0 Flags field.
+ * Added PhyInfo defines for power condition.
+ * Added Ethernet configuration pages.
* --------------------------------------------------------------------------
*/
#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
/*****************************************************************************
#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
+/* Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+
+
+
/****************************************************************************
* Configuration messages
****************************************************************************/
#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
+
#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+/* IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U16 Reserved1; /* 0x04 */
+ U8 PCIeWidth; /* 0x06 */
+ U8 PCIeSpeed; /* 0x07 */
+ U32 ProcessorState; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+ U16 IOCTemperature; /* 0x10 */
+ U8 IOCTemperatureUnits; /* 0x12 */
+ U8 IOCSpeed; /* 0x13 */
+ U32 Reserved3; /* 0x14 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+ Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+
+/* defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+
+/* defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+
+/* defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
+
+/* defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
+
+
+
/****************************************************************************
* IOC Config Pages
****************************************************************************/
/* values for PhyInfo fields */
#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
+
#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
/* values for SAS IO Unit Page 1 PortFlags */
#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
-/* values for SAS IO Unit Page 2 PhyFlags */
+/* values for SAS IO Unit Page 1 PhyFlags */
#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
-/* values for SAS IO Unit Page 0 MaxMinLinkRate */
+/* values for SAS IO Unit Page 1 MaxMinLinkRate */
#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
+/* SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+ U8 ControlFlags; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 InactivityTimerExponent; /* 0x02 */
+ U8 SATAPartialTimeout; /* 0x04 */
+ U8 Reserved2; /* 0x05 */
+ U8 SATASlumberTimeout; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+ U8 SASPartialTimeout; /* 0x08 */
+ U8 Reserved4; /* 0x09 */
+ U8 SASSlumberTimeout; /* 0x0A */
+ U8 Reserved5; /* 0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
+
+/* defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+
+/* defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 NumPhys; /* 0x08 */
+ U8 Reserved1; /* 0x09 */
+ U16 Reserved2; /* 0x0A */
+ U32 Reserved3; /* 0x0C */
+ MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings
+ [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00)
+
+
+
+
/****************************************************************************
* SAS Expander Config Pages
****************************************************************************/
/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
/* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
+/****************************************************************************
+* Ethernet Config Pages
+****************************************************************************/
+
+/* Ethernet Page 0 */
+
+/* IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+ U32 IPv4Addr;
+ U32 IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
+ Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 NumInterfaces; /* 0x08 */
+ U8 Reserved0; /* 0x09 */
+ U16 Reserved1; /* 0x0A */
+ U32 Status; /* 0x0C */
+ U8 MediaState; /* 0x10 */
+ U8 Reserved2; /* 0x11 */
+ U16 Reserved3; /* 0x12 */
+ U8 MacAddress[6]; /* 0x14 */
+ U8 Reserved4; /* 0x1A */
+ U8 Reserved5; /* 0x1B */
+ MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */
+ MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */
+ MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */
+ MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */
+ MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */
+ MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */
+ U8 HostName
+ [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+ Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
+
+/* values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
+
+/* values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
+#define MPI2_ETHPG0_MS_10MBIT (0x01)
+#define MPI2_ETHPG0_MS_100MBIT (0x02)
+#define MPI2_ETHPG0_MS_1GBIT (0x03)
+
+
+/* Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved0; /* 0x08 */
+ U32 Flags; /* 0x0C */
+ U8 MediaState; /* 0x10 */
+ U8 Reserved1; /* 0x11 */
+ U16 Reserved2; /* 0x12 */
+ U8 MacAddress[6]; /* 0x14 */
+ U8 Reserved3; /* 0x1A */
+ U8 Reserved4; /* 0x1B */
+ MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */
+ MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */
+ MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */
+ MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */
+ MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */
+ U32 Reserved5; /* 0x6C */
+ U32 Reserved6; /* 0x70 */
+ U32 Reserved7; /* 0x74 */
+ U32 Reserved8; /* 0x78 */
+ U8 HostName
+ [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+ Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
+
+/* values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
+
+/* values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
+
+
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff