x86: probe nr_irqs even only mptable is used
authorYinghai Lu <yhlu.kernel@gmail.com>
Wed, 20 Aug 2008 03:50:52 +0000 (20:50 -0700)
committerIngo Molnar <mingo@elte.hu>
Thu, 16 Oct 2008 14:52:58 +0000 (16:52 +0200)
for !CONFIG_HAVE_SPARSE_IRQ

fix:

 In file included from arch/x86/kernel/early-quirks.c:18:
 include/asm/io_apic.h: In function 'probe_nr_irqs':
 include/asm/io_apic.h:209: error: 'NR_IRQS' undeclared (first use in this function)
 include/asm/io_apic.h:209: error: (Each undeclared identifier is reported only once
 include/asm/io_apic.h:209: error: for each function it appears in.)

v2: fix by Ingo

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/acpi/boot.c
arch/x86/kernel/io_apic.c
arch/x86/kernel/setup.c
include/asm-x86/io_apic.h
include/asm-x86/mpspec.h

index 3e9d163..5fef4fe 100644 (file)
@@ -957,29 +957,6 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
        nr_ioapics++;
 }
 
-int get_nr_irqs_via_madt(void)
-{
-       int idx;
-       int nr = 0;
-
-       for (idx = 0; idx < nr_ioapics; idx++) {
-               if (mp_ioapic_routing[idx].gsi_end > nr)
-                       nr = mp_ioapic_routing[idx].gsi_end;
-       }
-
-       nr++;
-
-       /* double it for hotplug and msi and nmi */
-       nr <<= 1;
-
-       /* something wrong ? */
-       if (nr < 32)
-               nr = 32;
-
-       return nr;
-
-}
-
 static void assign_to_mp_irq(struct mp_config_intsrc *m,
                                    struct mp_config_intsrc *mp_irq)
 {
@@ -1278,8 +1255,6 @@ static int __init acpi_parse_madt_ioapic_entries(void)
        }
 
 
-       nr_irqs = get_nr_irqs_via_madt();
-
        count =
            acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
                                  nr_irqs);
index f853b66..f7e8026 100644 (file)
@@ -3596,6 +3596,36 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 }
 #endif /* CONFIG_HT_IRQ */
 
+int __init io_apic_get_redir_entries (int ioapic)
+{
+       union IO_APIC_reg_01    reg_01;
+       unsigned long flags;
+
+       spin_lock_irqsave(&ioapic_lock, flags);
+       reg_01.raw = io_apic_read(ioapic, 1);
+       spin_unlock_irqrestore(&ioapic_lock, flags);
+
+       return reg_01.bits.entries;
+}
+
+int __init probe_nr_irqs(void)
+{
+       int idx;
+       int nr = 0;
+
+       for (idx = 0; idx < nr_ioapics; idx++)
+               nr += io_apic_get_redir_entries(idx);
+
+       /* double it for hotplug and msi and nmi */
+       nr <<= 1;
+
+       /* something wrong ? */
+       if (nr < 32)
+               nr = 32;
+
+       return nr;
+}
+
 /* --------------------------------------------------------------------------
                           ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
@@ -3690,19 +3720,6 @@ int __init io_apic_get_version(int ioapic)
 }
 #endif
 
-int __init io_apic_get_redir_entries (int ioapic)
-{
-       union IO_APIC_reg_01    reg_01;
-       unsigned long flags;
-
-       spin_lock_irqsave(&ioapic_lock, flags);
-       reg_01.raw = io_apic_read(ioapic, 1);
-       spin_unlock_irqrestore(&ioapic_lock, flags);
-
-       return reg_01.bits.entries;
-}
-
-
 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
 {
        if (!IO_APIC_IRQ(irq)) {
index d90c659..6133530 100644 (file)
@@ -1069,15 +1069,15 @@ void __init setup_arch(char **cmdline_p)
        prefill_possible_map();
 
 #ifdef CONFIG_X86_64
-       /* need to wait for nr_cpu_ids settle down */
-       if (nr_irqs == NR_IRQS)
-               nr_irqs = 32 * nr_cpu_ids + 224;
        init_cpu_to_node();
 #endif
 
        init_apic_mappings();
        ioapic_init_mappings();
 
+       /* need to wait for io_apic is mapped */
+       nr_irqs = probe_nr_irqs();
+
        kvm_guest_init();
 
        e820_reserve_resources();
index ce81829..d35cbd7 100644 (file)
@@ -4,6 +4,7 @@
 #include <linux/types.h>
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
 
 /*
  * Intel IO-APIC support for SMP and UP systems.
@@ -187,10 +188,17 @@ extern void restore_IO_APIC_setup(void);
 extern void reinit_intr_remapped_IO_APIC(int);
 #endif
 
+extern int probe_nr_irqs(void);
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void) { }
+
+static inline int probe_nr_irqs(void)
+{
+       return NR_IRQS;
+}
 #endif
 
 #endif /* ASM_X86__IO_APIC_H */
index a074802..be2241a 100644 (file)
@@ -60,7 +60,6 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
                                   u32 gsi);
 extern void mp_config_acpi_legacy_irqs(void);
 extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
-extern int get_nr_irqs_via_madt(void);
 #ifdef CONFIG_X86_IO_APIC
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
                                u32 gsi, int triggering, int polarity);