ALSA: hda - Don't reset SPDIF in each status change
authorTakashi Iwai <tiwai@suse.de>
Mon, 11 Aug 2008 08:04:40 +0000 (10:04 +0200)
committerJaroslav Kysela <perex@perex.cz>
Wed, 13 Aug 2008 09:46:59 +0000 (11:46 +0200)
The SPDIF output is toggled at each time any SPDIF status bits are changed
because of the known problems on some codecs.  But, this also results in
loosing the sync, and the problem is more obvious on HDMI output over
SPDIF.  Since the toggle is necessary only for some codecs, we should
check whether this workaround is needed and skip if unnecessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_codec.h
sound/pci/hda/patch_realtek.c

index 77fbcd4..529bd5f 100644 (file)
@@ -2590,12 +2590,12 @@ static void setup_dig_out_stream(struct hda_codec *codec, hda_nid_t nid,
                                 unsigned int stream_tag, unsigned int format)
 {
        /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
-       if (codec->spdif_ctls & AC_DIG1_ENABLE)
+       if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
                snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
                                    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
        snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
        /* turn on again (if needed) */
-       if (codec->spdif_ctls & AC_DIG1_ENABLE)
+       if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
                snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
                                    codec->spdif_ctls & 0xff);
 }
index 2f11262..aeee581 100644 (file)
@@ -654,6 +654,11 @@ struct hda_codec {
 
        struct snd_hwdep *hwdep;        /* assigned hwdep device */
 
+       /* misc flags */
+       unsigned int spdif_status_reset :1; /* needs to toggle SPDIF for each
+                                            * status change
+                                            * (e.g. Realtek codecs)
+                                            */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
        unsigned int power_on :1;       /* current (global) power-state */
        unsigned int power_transition :1; /* power-state in transition */
index 7e5422f..8bff732 100644 (file)
@@ -2670,6 +2670,8 @@ static int alc_build_pcms(struct hda_codec *codec)
                        info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture);
                        info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid;
                }
+               /* FIXME: do we need this for all Realtek codec models? */
+               codec->spdif_status_reset = 1;
        }
 
        /* If the use of more than one ADC is requested for the current