--- /dev/null
- #ifdef CONFIG_X86_64
- add_pda(apic_perf_irqs, 1);
- #else
- per_cpu(irq_stat, smp_processor_id()).apic_perf_irqs++;
- #endif
+/*
+ * Performance counter x86 architecture code
+ *
+ * Copyright(C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ * Copyright(C) 2008 Red Hat, Inc., Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+
+#include <linux/perf_counter.h>
+#include <linux/capability.h>
+#include <linux/notifier.h>
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+
+#include <asm/intel_arch_perfmon.h>
+#include <asm/apic.h>
+
+static bool perf_counters_initialized __read_mostly;
+
+/*
+ * Number of (generic) HW counters:
+ */
+static int nr_hw_counters __read_mostly;
+static u32 perf_counter_mask __read_mostly;
+
+/* No support for fixed function counters yet */
+
+#define MAX_HW_COUNTERS 8
+
+struct cpu_hw_counters {
+ struct perf_counter *counters[MAX_HW_COUNTERS];
+ unsigned long used[BITS_TO_LONGS(MAX_HW_COUNTERS)];
+};
+
+/*
+ * Intel PerfMon v3. Used on Core2 and later.
+ */
+static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
+
+const int intel_perfmon_event_map[] =
+{
+ [PERF_COUNT_CYCLES] = 0x003c,
+ [PERF_COUNT_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_CACHE_REFERENCES] = 0x4f2e,
+ [PERF_COUNT_CACHE_MISSES] = 0x412e,
+ [PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x00c4,
+ [PERF_COUNT_BRANCH_MISSES] = 0x00c5,
+};
+
+const int max_intel_perfmon_events = ARRAY_SIZE(intel_perfmon_event_map);
+
+/*
+ * Setup the hardware configuration for a given hw_event_type
+ */
+static int __hw_perf_counter_init(struct perf_counter *counter)
+{
+ struct perf_counter_hw_event *hw_event = &counter->hw_event;
+ struct hw_perf_counter *hwc = &counter->hw;
+
+ if (unlikely(!perf_counters_initialized))
+ return -EINVAL;
+
+ /*
+ * Count user events, and generate PMC IRQs:
+ * (keep 'enabled' bit clear for now)
+ */
+ hwc->config = ARCH_PERFMON_EVENTSEL_USR | ARCH_PERFMON_EVENTSEL_INT;
+
+ /*
+ * If privileged enough, count OS events too, and allow
+ * NMI events as well:
+ */
+ hwc->nmi = 0;
+ if (capable(CAP_SYS_ADMIN)) {
+ hwc->config |= ARCH_PERFMON_EVENTSEL_OS;
+ if (hw_event->nmi)
+ hwc->nmi = 1;
+ }
+
+ hwc->config_base = MSR_ARCH_PERFMON_EVENTSEL0;
+ hwc->counter_base = MSR_ARCH_PERFMON_PERFCTR0;
+
+ hwc->irq_period = hw_event->irq_period;
+ /*
+ * Intel PMCs cannot be accessed sanely above 32 bit width,
+ * so we install an artificial 1<<31 period regardless of
+ * the generic counter period:
+ */
+ if (!hwc->irq_period)
+ hwc->irq_period = 0x7FFFFFFF;
+
+ hwc->next_count = -(s32)hwc->irq_period;
+
+ /*
+ * Raw event type provide the config in the event structure
+ */
+ if (hw_event->raw) {
+ hwc->config |= hw_event->type;
+ } else {
+ if (hw_event->type >= max_intel_perfmon_events)
+ return -EINVAL;
+ /*
+ * The generic map:
+ */
+ hwc->config |= intel_perfmon_event_map[hw_event->type];
+ }
+ counter->wakeup_pending = 0;
+
+ return 0;
+}
+
+void hw_perf_enable_all(void)
+{
+ wrmsr(MSR_CORE_PERF_GLOBAL_CTRL, perf_counter_mask, 0);
+}
+
+void hw_perf_restore(u64 ctrl)
+{
+ wrmsr(MSR_CORE_PERF_GLOBAL_CTRL, ctrl, 0);
+}
+EXPORT_SYMBOL_GPL(hw_perf_restore);
+
+u64 hw_perf_save_disable(void)
+{
+ u64 ctrl;
+
+ rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
+ wrmsr(MSR_CORE_PERF_GLOBAL_CTRL, 0, 0);
+ return ctrl;
+}
+EXPORT_SYMBOL_GPL(hw_perf_save_disable);
+
+static inline void
+__x86_perf_counter_disable(struct hw_perf_counter *hwc, unsigned int idx)
+{
+ wrmsr(hwc->config_base + idx, hwc->config, 0);
+}
+
+static DEFINE_PER_CPU(u64, prev_next_count[MAX_HW_COUNTERS]);
+
+static void __hw_perf_counter_set_period(struct hw_perf_counter *hwc, int idx)
+{
+ per_cpu(prev_next_count[idx], smp_processor_id()) = hwc->next_count;
+
+ wrmsr(hwc->counter_base + idx, hwc->next_count, 0);
+}
+
+static void __x86_perf_counter_enable(struct hw_perf_counter *hwc, int idx)
+{
+ wrmsr(hwc->config_base + idx,
+ hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE, 0);
+}
+
+static void x86_perf_counter_enable(struct perf_counter *counter)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ struct hw_perf_counter *hwc = &counter->hw;
+ int idx = hwc->idx;
+
+ /* Try to get the previous counter again */
+ if (test_and_set_bit(idx, cpuc->used)) {
+ idx = find_first_zero_bit(cpuc->used, nr_hw_counters);
+ set_bit(idx, cpuc->used);
+ hwc->idx = idx;
+ }
+
+ perf_counters_lapic_init(hwc->nmi);
+
+ __x86_perf_counter_disable(hwc, idx);
+
+ cpuc->counters[idx] = counter;
+
+ __hw_perf_counter_set_period(hwc, idx);
+ __x86_perf_counter_enable(hwc, idx);
+}
+
+static void __hw_perf_save_counter(struct perf_counter *counter,
+ struct hw_perf_counter *hwc, int idx)
+{
+ s64 raw = -1;
+ s64 delta;
+
+ /*
+ * Get the raw hw counter value:
+ */
+ rdmsrl(hwc->counter_base + idx, raw);
+
+ /*
+ * Rebase it to zero (it started counting at -irq_period),
+ * to see the delta since ->prev_count:
+ */
+ delta = (s64)hwc->irq_period + (s64)(s32)raw;
+
+ atomic64_counter_set(counter, hwc->prev_count + delta);
+
+ /*
+ * Adjust the ->prev_count offset - if we went beyond
+ * irq_period of units, then we got an IRQ and the counter
+ * was set back to -irq_period:
+ */
+ while (delta >= (s64)hwc->irq_period) {
+ hwc->prev_count += hwc->irq_period;
+ delta -= (s64)hwc->irq_period;
+ }
+
+ /*
+ * Calculate the next raw counter value we'll write into
+ * the counter at the next sched-in time:
+ */
+ delta -= (s64)hwc->irq_period;
+
+ hwc->next_count = (s32)delta;
+}
+
+void perf_counter_print_debug(void)
+{
+ u64 ctrl, status, overflow, pmc_ctrl, pmc_count, next_count;
+ int cpu, idx;
+
+ if (!nr_hw_counters)
+ return;
+
+ local_irq_disable();
+
+ cpu = smp_processor_id();
+
+ rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+ rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
+
+ printk(KERN_INFO "\n");
+ printk(KERN_INFO "CPU#%d: ctrl: %016llx\n", cpu, ctrl);
+ printk(KERN_INFO "CPU#%d: status: %016llx\n", cpu, status);
+ printk(KERN_INFO "CPU#%d: overflow: %016llx\n", cpu, overflow);
+
+ for (idx = 0; idx < nr_hw_counters; idx++) {
+ rdmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + idx, pmc_ctrl);
+ rdmsrl(MSR_ARCH_PERFMON_PERFCTR0 + idx, pmc_count);
+
+ next_count = per_cpu(prev_next_count[idx], cpu);
+
+ printk(KERN_INFO "CPU#%d: PMC%d ctrl: %016llx\n",
+ cpu, idx, pmc_ctrl);
+ printk(KERN_INFO "CPU#%d: PMC%d count: %016llx\n",
+ cpu, idx, pmc_count);
+ printk(KERN_INFO "CPU#%d: PMC%d next: %016llx\n",
+ cpu, idx, next_count);
+ }
+ local_irq_enable();
+}
+
+static void x86_perf_counter_disable(struct perf_counter *counter)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ struct hw_perf_counter *hwc = &counter->hw;
+ unsigned int idx = hwc->idx;
+
+ __x86_perf_counter_disable(hwc, idx);
+
+ clear_bit(idx, cpuc->used);
+ cpuc->counters[idx] = NULL;
+ __hw_perf_save_counter(counter, hwc, idx);
+}
+
+static void x86_perf_counter_read(struct perf_counter *counter)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
+ unsigned long addr = hwc->counter_base + hwc->idx;
+ s64 offs, val = -1LL;
+ s32 val32;
+
+ /* Careful: NMI might modify the counter offset */
+ do {
+ offs = hwc->prev_count;
+ rdmsrl(addr, val);
+ } while (offs != hwc->prev_count);
+
+ val32 = (s32) val;
+ val = (s64)hwc->irq_period + (s64)val32;
+ atomic64_counter_set(counter, hwc->prev_count + val);
+}
+
+static void perf_store_irq_data(struct perf_counter *counter, u64 data)
+{
+ struct perf_data *irqdata = counter->irqdata;
+
+ if (irqdata->len > PERF_DATA_BUFLEN - sizeof(u64)) {
+ irqdata->overrun++;
+ } else {
+ u64 *p = (u64 *) &irqdata->data[irqdata->len];
+
+ *p = data;
+ irqdata->len += sizeof(u64);
+ }
+}
+
+/*
+ * NMI-safe enable method:
+ */
+static void perf_save_and_restart(struct perf_counter *counter)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
+ int idx = hwc->idx;
+ u64 pmc_ctrl;
+
+ rdmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + idx, pmc_ctrl);
+
+ __hw_perf_save_counter(counter, hwc, idx);
+ __hw_perf_counter_set_period(hwc, idx);
+
+ if (pmc_ctrl & ARCH_PERFMON_EVENTSEL0_ENABLE)
+ __x86_perf_counter_enable(hwc, idx);
+}
+
+static void
+perf_handle_group(struct perf_counter *sibling, u64 *status, u64 *overflown)
+{
+ struct perf_counter *counter, *group_leader = sibling->group_leader;
+ int bit;
+
+ /*
+ * Store the counter's own timestamp first:
+ */
+ perf_store_irq_data(sibling, sibling->hw_event.type);
+ perf_store_irq_data(sibling, atomic64_counter_read(sibling));
+
+ /*
+ * Then store sibling timestamps (if any):
+ */
+ list_for_each_entry(counter, &group_leader->sibling_list, list_entry) {
+ if (counter->state != PERF_COUNTER_STATE_ACTIVE) {
+ /*
+ * When counter was not in the overflow mask, we have to
+ * read it from hardware. We read it as well, when it
+ * has not been read yet and clear the bit in the
+ * status mask.
+ */
+ bit = counter->hw.idx;
+ if (!test_bit(bit, (unsigned long *) overflown) ||
+ test_bit(bit, (unsigned long *) status)) {
+ clear_bit(bit, (unsigned long *) status);
+ perf_save_and_restart(counter);
+ }
+ }
+ perf_store_irq_data(sibling, counter->hw_event.type);
+ perf_store_irq_data(sibling, atomic64_counter_read(counter));
+ }
+}
+
+/*
+ * This handler is triggered by the local APIC, so the APIC IRQ handling
+ * rules apply:
+ */
+static void __smp_perf_counter_interrupt(struct pt_regs *regs, int nmi)
+{
+ int bit, cpu = smp_processor_id();
+ u64 ack, status, saved_global;
+ struct cpu_hw_counters *cpuc;
+
+ rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, saved_global);
+
+ /* Disable counters globally */
+ wrmsr(MSR_CORE_PERF_GLOBAL_CTRL, 0, 0);
+ ack_APIC_irq();
+
+ cpuc = &per_cpu(cpu_hw_counters, cpu);
+
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+ if (!status)
+ goto out;
+
+again:
+ ack = status;
+ for_each_bit(bit, (unsigned long *) &status, nr_hw_counters) {
+ struct perf_counter *counter = cpuc->counters[bit];
+
+ clear_bit(bit, (unsigned long *) &status);
+ if (!counter)
+ continue;
+
+ perf_save_and_restart(counter);
+
+ switch (counter->hw_event.record_type) {
+ case PERF_RECORD_SIMPLE:
+ continue;
+ case PERF_RECORD_IRQ:
+ perf_store_irq_data(counter, instruction_pointer(regs));
+ break;
+ case PERF_RECORD_GROUP:
+ perf_handle_group(counter, &status, &ack);
+ break;
+ }
+ /*
+ * From NMI context we cannot call into the scheduler to
+ * do a task wakeup - but we mark these counters as
+ * wakeup_pending and initate a wakeup callback:
+ */
+ if (nmi) {
+ counter->wakeup_pending = 1;
+ set_tsk_thread_flag(current, TIF_PERF_COUNTERS);
+ } else {
+ wake_up(&counter->waitq);
+ }
+ }
+
+ wrmsr(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack, 0);
+
+ /*
+ * Repeat if there is more work to be done:
+ */
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+ if (status)
+ goto again;
+out:
+ /*
+ * Restore - do not reenable when global enable is off:
+ */
+ wrmsr(MSR_CORE_PERF_GLOBAL_CTRL, saved_global, 0);
+}
+
+void smp_perf_counter_interrupt(struct pt_regs *regs)
+{
+ irq_enter();
++ inc_irq_stat(apic_perf_irqs);
+ apic_write(APIC_LVTPC, LOCAL_PERF_VECTOR);
+ __smp_perf_counter_interrupt(regs, 0);
+
+ irq_exit();
+}
+
+/*
+ * This handler is triggered by NMI contexts:
+ */
+void perf_counter_notify(struct pt_regs *regs)
+{
+ struct cpu_hw_counters *cpuc;
+ unsigned long flags;
+ int bit, cpu;
+
+ local_irq_save(flags);
+ cpu = smp_processor_id();
+ cpuc = &per_cpu(cpu_hw_counters, cpu);
+
+ for_each_bit(bit, cpuc->used, nr_hw_counters) {
+ struct perf_counter *counter = cpuc->counters[bit];
+
+ if (!counter)
+ continue;
+
+ if (counter->wakeup_pending) {
+ counter->wakeup_pending = 0;
+ wake_up(&counter->waitq);
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
+void __cpuinit perf_counters_lapic_init(int nmi)
+{
+ u32 apic_val;
+
+ if (!perf_counters_initialized)
+ return;
+ /*
+ * Enable the performance counter vector in the APIC LVT:
+ */
+ apic_val = apic_read(APIC_LVTERR);
+
+ apic_write(APIC_LVTERR, apic_val | APIC_LVT_MASKED);
+ if (nmi)
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ else
+ apic_write(APIC_LVTPC, LOCAL_PERF_VECTOR);
+ apic_write(APIC_LVTERR, apic_val);
+}
+
+static int __kprobes
+perf_counter_nmi_handler(struct notifier_block *self,
+ unsigned long cmd, void *__args)
+{
+ struct die_args *args = __args;
+ struct pt_regs *regs;
+
+ if (likely(cmd != DIE_NMI_IPI))
+ return NOTIFY_DONE;
+
+ regs = args->regs;
+
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ __smp_perf_counter_interrupt(regs, 1);
+
+ return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
+ .notifier_call = perf_counter_nmi_handler
+};
+
+void __init init_hw_perf_counters(void)
+{
+ union cpuid10_eax eax;
+ unsigned int unused;
+ unsigned int ebx;
+
+ if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return;
+
+ /*
+ * Check whether the Architectural PerfMon supports
+ * Branch Misses Retired Event or not.
+ */
+ cpuid(10, &(eax.full), &ebx, &unused, &unused);
+ if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+ return;
+
+ printk(KERN_INFO "Intel Performance Monitoring support detected.\n");
+
+ printk(KERN_INFO "... version: %d\n", eax.split.version_id);
+ printk(KERN_INFO "... num_counters: %d\n", eax.split.num_counters);
+ nr_hw_counters = eax.split.num_counters;
+ if (nr_hw_counters > MAX_HW_COUNTERS) {
+ nr_hw_counters = MAX_HW_COUNTERS;
+ WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
+ nr_hw_counters, MAX_HW_COUNTERS);
+ }
+ perf_counter_mask = (1 << nr_hw_counters) - 1;
+ perf_max_counters = nr_hw_counters;
+
+ printk(KERN_INFO "... bit_width: %d\n", eax.split.bit_width);
+ printk(KERN_INFO "... mask_length: %d\n", eax.split.mask_length);
+
+ perf_counters_lapic_init(0);
+ register_die_notifier(&perf_counter_nmi_notifier);
+
+ perf_counters_initialized = true;
+}
+
+static const struct hw_perf_counter_ops x86_perf_counter_ops = {
+ .hw_perf_counter_enable = x86_perf_counter_enable,
+ .hw_perf_counter_disable = x86_perf_counter_disable,
+ .hw_perf_counter_read = x86_perf_counter_read,
+};
+
+const struct hw_perf_counter_ops *
+hw_perf_counter_init(struct perf_counter *counter)
+{
+ int err;
+
+ err = __hw_perf_counter_init(counter);
+ if (err)
+ return NULL;
+
+ return &x86_perf_counter_ops;
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff