POWERPC: mpc82xx merge: board-specific/platform stuff(resend)
authorVitaly Bordug <vbordug@ru.mvista.com>
Mon, 2 Oct 2006 18:45:17 +0000 (22:45 +0400)
committerVitaly Bordug <vbordug@ru.mvista.com>
Tue, 3 Oct 2006 17:36:14 +0000 (21:36 +0400)
This intruduces 82xx family in arch/powerpc/platforms,
and has all the board-specific code to represent regression-less
transaction from ppc. The functionality is apparently the same, including
PCI controller.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
arch/powerpc/platforms/82xx/Kconfig [new file with mode: 0644]
arch/powerpc/platforms/82xx/Makefile [new file with mode: 0644]
arch/powerpc/platforms/82xx/m82xx_pci.h [new file with mode: 0644]
arch/powerpc/platforms/82xx/mpc82xx.c [new file with mode: 0644]
arch/powerpc/platforms/82xx/mpc82xx_ads.c [new file with mode: 0644]
arch/powerpc/platforms/82xx/pq2ads.h [new file with mode: 0644]

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
new file mode 100644 (file)
index 0000000..47d841e
--- /dev/null
@@ -0,0 +1,21 @@
+menu "Platform support"
+       depends on PPC_82xx
+
+choice
+       prompt "Machine Type"
+       default MPC82xx_ADS
+
+config MPC82xx_ADS
+       bool "Freescale MPC82xx ADS"
+       select DEFAULT_UIMAGE
+       select PQ2ADS
+       select 8272
+       select 8260
+       select CPM2
+       select FSL_SOC
+       help
+         This option enables support for the MPC8272 ADS board
+
+endchoice
+
+endmenu
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
new file mode 100644 (file)
index 0000000..d9fd4c8
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for the PowerPC 82xx linux kernel.
+#
+obj-$(CONFIG_PPC_82xx) += mpc82xx.o
+obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o
diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h
new file mode 100644 (file)
index 0000000..9cd8893
--- /dev/null
@@ -0,0 +1,19 @@
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/m8260_pci.h>
+
+#define SIU_INT_IRQ1   ((uint)0x13 + CPM_IRQ_OFFSET)
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#endif                         /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
new file mode 100644 (file)
index 0000000..89d702d
--- /dev/null
@@ -0,0 +1,111 @@
+/*
+ * MPC82xx setup and early boot code plus other random bits.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/fs_uart_pd.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc8260.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+#include <linux/fs_enet_pd.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2ads_pd.h"
+
+static int __init get_freq(char *name, unsigned long *val)
+{
+       struct device_node *cpu;
+       unsigned int *fp;
+       int found = 0;
+
+       /* The cpu node should have timebase and clock frequency properties */
+       cpu = of_find_node_by_type(NULL, "cpu");
+
+       if (cpu) {
+               fp = (unsigned int *)get_property(cpu, name, NULL);
+               if (fp) {
+                       found = 1;
+                       *val = *fp++;
+               }
+
+               of_node_put(cpu);
+       }
+
+       return found;
+}
+
+void __init m82xx_calibrate_decr(void)
+{
+       ppc_tb_freq = 125000000;
+       if (!get_freq("bus-frequency", &ppc_tb_freq)) {
+               printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+                               "(not found)\n");
+       }
+       ppc_tb_freq /= 4;
+       ppc_proc_freq = 1000000000;
+       if (!get_freq("clock-frequency", &ppc_proc_freq))
+               printk(KERN_ERR "WARNING: Estimating processor frequency"
+                               "(not found)\n");
+}
+
+void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
+{
+       uint pvid, svid, phid1;
+       uint memsize = total_memory;
+
+       pvid = mfspr(SPRN_PVR);
+       svid = mfspr(SPRN_SVR);
+
+       seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+       seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
+       seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+       seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+       /* Display cpu Pll setting */
+       phid1 = mfspr(SPRN_HID1);
+       seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+       /* Display the amount of memory */
+       seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
new file mode 100644 (file)
index 0000000..4276f08
--- /dev/null
@@ -0,0 +1,661 @@
+/*
+ * MPC82xx_ads setup and early boot code plus other random bits.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/fs_uart_pd.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc8260.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+#include <linux/fs_enet_pd.h>
+
+#include <sysdev/fsl_soc.h>
+#include <../sysdev/cpm2_pic.h>
+
+#include "pq2ads_pd.h"
+
+#ifdef CONFIG_PCI
+static uint pci_clk_frq;
+static struct {
+       unsigned long *pci_int_stat_reg;
+       unsigned long *pci_int_mask_reg;
+} pci_regs;
+
+static unsigned long pci_int_base;
+static struct irq_host *pci_pic_host;
+static struct device_node *pci_pic_node;
+#endif
+
+static void __init mpc82xx_ads_pic_init(void)
+{
+       struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
+       struct resource r;
+       cpm2_map_t *cpm_reg;
+
+       if (np == NULL) {
+               printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+               return;
+       }
+       if (of_address_to_resource(np, 0, &r)) {
+               printk(KERN_ERR "PIC init: invalid resource\n");
+               of_node_put(np);
+               return;
+       }
+       cpm2_pic_init(np);
+       of_node_put(np);
+
+       /* Initialize the default interrupt mapping priorities,
+        * in case the boot rom changed something on us.
+        */
+       cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
+       cpm_reg->im_intctl.ic_siprr = 0x05309770;
+       iounmap(cpm_reg);
+#ifdef CONFIG_PCI
+       /* Initialize stuff for the 82xx CPLD IC and install demux  */
+       m82xx_pci_init_irq();
+#endif
+}
+
+static void init_fcc1_ioports(struct fs_platform_info *fpi)
+{
+       struct io_port *io;
+       u32 tempval;
+       cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+       struct device_node *np;
+       struct resource r;
+       u32 *bcsr;
+
+       np = of_find_node_by_type(NULL, "memory");
+       if (!np) {
+               printk(KERN_INFO "No memory node in device tree\n");
+               return;
+       }
+       if (of_address_to_resource(np, 1, &r)) {
+               printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+               return;
+       }
+       of_node_put(np);
+       bcsr = ioremap(r.start + 4, sizeof(u32));
+       io = &immap->im_ioport;
+
+       /* Enable the PHY */
+       clrbits32(bcsr, BCSR1_FETHIEN);
+       setbits32(bcsr, BCSR1_FETH_RST);
+
+       /* FCC1 pins are on port A/C. */
+       /* Configure port A and C pins for FCC1 Ethernet. */
+
+       tempval = in_be32(&io->iop_pdira);
+       tempval &= ~PA1_DIRA0;
+       tempval |= PA1_DIRA1;
+       out_be32(&io->iop_pdira, tempval);
+
+       tempval = in_be32(&io->iop_psora);
+       tempval &= ~PA1_PSORA0;
+       tempval |= PA1_PSORA1;
+       out_be32(&io->iop_psora, tempval);
+
+       setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
+
+       /* Alter clocks */
+       tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
+
+       clrbits32(&io->iop_psorc, tempval);
+       clrbits32(&io->iop_pdirc, tempval);
+       setbits32(&io->iop_pparc, tempval);
+
+       cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
+
+       iounmap(bcsr);
+       iounmap(immap);
+}
+
+static void init_fcc2_ioports(struct fs_platform_info *fpi)
+{
+       cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+       struct device_node *np;
+       struct resource r;
+       u32 *bcsr;
+
+       struct io_port *io;
+       u32 tempval;
+
+       np = of_find_node_by_type(NULL, "memory");
+       if (!np) {
+               printk(KERN_INFO "No memory node in device tree\n");
+               return;
+       }
+       if (of_address_to_resource(np, 1, &r)) {
+               printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+               return;
+       }
+       of_node_put(np);
+       io = &immap->im_ioport;
+       bcsr = ioremap(r.start + 12, sizeof(u32));
+
+       /* Enable the PHY */
+       clrbits32(bcsr, BCSR3_FETHIEN2);
+       setbits32(bcsr, BCSR3_FETH2_RST);
+
+       /* FCC2 are port B/C. */
+       /* Configure port A and C pins for FCC2 Ethernet. */
+
+       tempval = in_be32(&io->iop_pdirb);
+       tempval &= ~PB2_DIRB0;
+       tempval |= PB2_DIRB1;
+       out_be32(&io->iop_pdirb, tempval);
+
+       tempval = in_be32(&io->iop_psorb);
+       tempval &= ~PB2_PSORB0;
+       tempval |= PB2_PSORB1;
+       out_be32(&io->iop_psorb, tempval);
+
+       setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
+
+       tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
+
+       /* Alter clocks */
+       clrbits32(&io->iop_psorc, tempval);
+       clrbits32(&io->iop_pdirc, tempval);
+       setbits32(&io->iop_pparc, tempval);
+
+       cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
+
+       iounmap(bcsr);
+       iounmap(immap);
+}
+
+void init_fcc_ioports(struct fs_platform_info *fpi)
+{
+       int fcc_no = fs_get_fcc_index(fpi->fs_no);
+
+       switch (fcc_no) {
+       case 0:
+               init_fcc1_ioports(fpi);
+               break;
+       case 1:
+               init_fcc2_ioports(fpi);
+               break;
+       default:
+               printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
+               return;
+       }
+}
+
+static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
+{
+       cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+
+       /* SCC1 is only on port D */
+       setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
+       clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
+       setbits32(&immap->im_ioport.iop_psord, 0x00000002);
+       clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
+       setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
+
+       clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
+       clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
+       setbits32(&immap->im_cpmux.cmx_scr,
+                 ((data->clk_tx - 1) << (4 - data->clk_tx)));
+       setbits32(&immap->im_cpmux.cmx_scr,
+                 ((data->clk_rx - 1) << (4 - data->clk_rx)));
+
+       iounmap(immap);
+}
+
+static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
+{
+       cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+
+       setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
+       clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
+       clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
+       setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
+
+       clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
+       clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
+       setbits32(&immap->im_cpmux.cmx_scr,
+                 ((data->clk_tx - 1) << (4 - data->clk_tx)));
+       setbits32(&immap->im_cpmux.cmx_scr,
+                 ((data->clk_rx - 1) << (4 - data->clk_rx)));
+
+       iounmap(immap);
+}
+
+void init_scc_ioports(struct fs_uart_platform_info *data)
+{
+       int scc_no = fs_get_scc_index(data->fs_no);
+
+       switch (scc_no) {
+       case 0:
+               init_scc1_uart_ioports(data);
+               data->brg = data->clk_rx;
+               break;
+       case 3:
+               init_scc4_uart_ioports(data);
+               data->brg = data->clk_rx;
+               break;
+       default:
+               printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
+               return;
+       }
+}
+
+void __init m82xx_board_setup(void)
+{
+       cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+       struct device_node *np;
+       struct resource r;
+       u32 *bcsr;
+
+       np = of_find_node_by_type(NULL, "memory");
+       if (!np) {
+               printk(KERN_INFO "No memory node in device tree\n");
+               return;
+       }
+       if (of_address_to_resource(np, 1, &r)) {
+               printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+               return;
+       }
+       of_node_put(np);
+       bcsr = ioremap(r.start + 4, sizeof(u32));
+       /* Enable the 2nd UART port */
+       clrbits32(bcsr, BCSR1_RS232_EN2);
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+       clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
+                 UART_SCCM_TX | UART_SCCM_RX);
+       clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
+                 SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+       clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
+                 UART_SCCM_TX | UART_SCCM_RX);
+       clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
+                 SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+       clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
+                 UART_SCCM_TX | UART_SCCM_RX);
+       clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
+                 SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+       clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
+                 UART_SCCM_TX | UART_SCCM_RX);
+       clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
+                 SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+       iounmap(bcsr);
+       iounmap(immap);
+}
+
+#ifdef CONFIG_PCI
+static void m82xx_pci_mask_irq(unsigned int irq)
+{
+       int bit = irq - pci_int_base;
+
+       *pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
+       return;
+}
+
+static void m82xx_pci_unmask_irq(unsigned int irq)
+{
+       int bit = irq - pci_int_base;
+
+       *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
+       return;
+}
+
+static void m82xx_pci_mask_and_ack(unsigned int irq)
+{
+       int bit = irq - pci_int_base;
+
+       *pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
+       return;
+}
+
+static void m82xx_pci_end_irq(unsigned int irq)
+{
+       int bit = irq - pci_int_base;
+
+       *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
+       return;
+}
+
+struct hw_interrupt_type m82xx_pci_ic = {
+       .typename = "MPC82xx ADS PCI",
+       .name = "MPC82xx ADS PCI",
+       .enable = m82xx_pci_unmask_irq,
+       .disable = m82xx_pci_mask_irq,
+       .ack = m82xx_pci_mask_and_ack,
+       .end = m82xx_pci_end_irq,
+       .mask = m82xx_pci_mask_irq,
+       .mask_ack = m82xx_pci_mask_and_ack,
+       .unmask = m82xx_pci_unmask_irq,
+       .eoi = m82xx_pci_end_irq,
+};
+
+static void
+m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc,
+                   struct pt_regs *regs)
+{
+       unsigned long stat, mask, pend;
+       int bit;
+
+       for (;;) {
+               stat = *pci_regs.pci_int_stat_reg;
+               mask = *pci_regs.pci_int_mask_reg;
+               pend = stat & ~mask & 0xf0000000;
+               if (!pend)
+                       break;
+               for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+                       if (pend & 0x80000000)
+                               __do_IRQ(pci_int_base + bit, regs);
+               }
+       }
+}
+
+static int pci_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+       return node == pci_pic_node;
+}
+
+static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
+                           irq_hw_number_t hw)
+{
+       get_irq_desc(virq)->status |= IRQ_LEVEL;
+       set_irq_chip(virq, &m82xx_pci_ic);
+       return 0;
+}
+
+static void pci_host_unmap(struct irq_host *h, unsigned int virq)
+{
+       /* remove chip and handler */
+       set_irq_chip(virq, NULL);
+}
+
+static struct irq_host_ops pci_pic_host_ops = {
+       .match = pci_pic_host_match,
+       .map = pci_pic_host_map,
+       .unmap = pci_host_unmap,
+};
+
+void m82xx_pci_init_irq(void)
+{
+       int irq;
+       cpm2_map_t *immap;
+       struct device_node *np;
+       struct resource r;
+       const u32 *regs;
+       unsigned int size;
+       const u32 *irq_map;
+       int i;
+       unsigned int irq_max, irq_min;
+
+       if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
+               printk(KERN_INFO "No SOC node in device tree\n");
+               return;
+       }
+       memset(&r, 0, sizeof(r));
+       if (of_address_to_resource(np, 0, &r)) {
+               printk(KERN_INFO "No SOC reg property in device tree\n");
+               return;
+       }
+       immap = ioremap(r.start, sizeof(*immap));
+       of_node_put(np);
+
+       /* install the demultiplexer for the PCI cascade interrupt */
+       np = of_find_node_by_type(NULL, "pci");
+       if (!np) {
+               printk(KERN_INFO "No pci node on device tree\n");
+               iounmap(immap);
+               return;
+       }
+       irq_map = get_property(np, "interrupt-map", &size);
+       if ((!irq_map) || (size <= 7)) {
+               printk(KERN_INFO "No interrupt-map property of pci node\n");
+               iounmap(immap);
+               return;
+       }
+       size /= sizeof(irq_map[0]);
+       for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
+               if (irq_map[5] < irq_min)
+                       irq_min = irq_map[5];
+               if (irq_map[5] > irq_max)
+                       irq_max = irq_map[5];
+       }
+       pci_int_base = irq_min;
+       irq = irq_of_parse_and_map(np, 0);
+       set_irq_chained_handler(irq, m82xx_pci_irq_demux);
+       of_node_put(np);
+       np = of_find_node_by_type(NULL, "pci-pic");
+       if (!np) {
+               printk(KERN_INFO "No pci pic node on device tree\n");
+               iounmap(immap);
+               return;
+       }
+       pci_pic_node = of_node_get(np);
+       /* PCI interrupt controller registers: status and mask */
+       regs = get_property(np, "reg", &size);
+       if ((!regs) || (size <= 2)) {
+               printk(KERN_INFO "No reg property in pci pic node\n");
+               iounmap(immap);
+               return;
+       }
+       pci_regs.pci_int_stat_reg =
+           ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
+       pci_regs.pci_int_mask_reg =
+           ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
+       of_node_put(np);
+       /* configure chip select for PCI interrupt controller */
+       immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
+       immap->im_memctl.memc_or3 = 0xffff8010;
+       /* make PCI IRQ level sensitive */
+       immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
+
+       /* mask all PCI interrupts */
+       *pci_regs.pci_int_mask_reg |= 0xfff00000;
+       iounmap(immap);
+       pci_pic_host =
+           irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
+                          &pci_pic_host_ops, irq_max + 1);
+       return;
+}
+
+static int m82xx_pci_exclude_device(u_char bus, u_char devfn)
+{
+       if (bus == 0 && PCI_SLOT(devfn) == 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+       else
+               return PCIBIOS_SUCCESSFUL;
+}
+
+static void
+__init mpc82xx_pcibios_fixup(void)
+{
+       struct pci_dev *dev = NULL;
+
+       for_each_pci_dev(dev) {
+               pci_read_irq_line(dev);
+       }
+}
+
+void __init add_bridge(struct device_node *np)
+{
+       int len;
+       struct pci_controller *hose;
+       struct resource r;
+       const int *bus_range;
+       const void *ptr;
+
+       memset(&r, 0, sizeof(r));
+       if (of_address_to_resource(np, 0, &r)) {
+               printk(KERN_INFO "No PCI reg property in device tree\n");
+               return;
+       }
+       if (!(ptr = get_property(np, "clock-frequency", NULL))) {
+               printk(KERN_INFO "No clock-frequency property in PCI node");
+               return;
+       }
+       pci_clk_frq = *(uint *) ptr;
+       of_node_put(np);
+       bus_range = get_property(np, "bus-range", &len);
+       if (bus_range == NULL || len < 2 * sizeof(int)) {
+               printk(KERN_WARNING "Can't get bus-range for %s, assume"
+                      " bus 0\n", np->full_name);
+       }
+
+       pci_assign_all_buses = 1;
+
+       hose = pcibios_alloc_controller();
+
+       if (!hose)
+               return;
+
+       hose->arch_data = np;
+       hose->set_cfg_type = 1;
+
+       hose->first_busno = bus_range ? bus_range[0] : 0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+       hose->bus_offset = 0;
+
+       hose->set_cfg_type = 1;
+
+       setup_indirect_pci(hose,
+                          r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
+                          r.start + offsetof(pci_cpm2_t, pci_cfg_data));
+
+       pci_process_bridge_OF_ranges(hose, np, 1);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc82xx_ads_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+       struct device_node *np;
+#endif
+
+       if (ppc_md.progress)
+               ppc_md.progress("mpc82xx_ads_setup_arch()", 0);
+       cpm2_reset();
+
+       /* Map I/O region to a 256MB BAT */
+
+       m82xx_board_setup();
+
+#ifdef CONFIG_PCI
+       ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
+       for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+               add_bridge(np);
+
+       of_node_put(np);
+       ppc_md.pci_map_irq = NULL;
+       ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup;
+       ppc_md.pcibios_fixup_bus = NULL;
+#endif
+
+#ifdef  CONFIG_ROOT_NFS
+       ROOT_DEV = Root_NFS;
+#else
+       ROOT_DEV = Root_HDA1;
+#endif
+
+       if (ppc_md.progress)
+               ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc82xx_ads_probe(void)
+{
+       /* We always match for now, eventually we should look at
+        * the flat dev tree to ensure this is the board we are
+        * supposed to run on
+        */
+       return 1;
+}
+
+#define RMR_CSRE 0x00000001
+static void m82xx_restart(char *cmd)
+{
+       __volatile__ unsigned char dummy;
+
+       local_irq_disable();
+       ((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
+
+       /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
+       mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
+       dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
+       printk("Restart failed\n");
+       while (1) ;
+}
+
+static void m82xx_halt(void)
+{
+       local_irq_disable();
+       while (1) ;
+}
+
+define_machine(mpc82xx_ads)
+{
+       .name = "MPC82xx ADS",
+       .probe = mpc82xx_ads_probe,
+       .setup_arch =    mpc82xx_ads_setup_arch,
+       .init_IRQ =    mpc82xx_ads_pic_init,
+       .show_cpuinfo =    mpc82xx_ads_show_cpuinfo,
+       .get_irq =    cpm2_get_irq,
+       .calibrate_decr =    m82xx_calibrate_decr,
+       .restart = m82xx_restart,.halt = m82xx_halt,
+};
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
new file mode 100644 (file)
index 0000000..a734821
--- /dev/null
@@ -0,0 +1,67 @@
+/*
+ * PQ2/mpc8260 board-specific stuff
+ *
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC8260ADS/MPC8266ADS-PCI boards.
+ * Copied from the RPX-Classic and SBS8260 stuff.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Originally written by Dan Malek for Motorola MPC8260 family
+ *
+ * Copyright (c) 2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MACH_ADS8260_DEFS
+#define __MACH_ADS8260_DEFS
+
+#include <linux/config.h>
+
+#include <asm/ppcboot.h>
+
+/* For our show_cpuinfo hooks. */
+#define CPUINFO_VENDOR         "Freescale Semiconductor"
+#define CPUINFO_MACHINE                "PQ2 ADS PowerPC"
+
+/* Backword-compatibility stuff for the drivers */
+#define CPM_MAP_ADDR           ((uint)0xf0000000)
+#define CPM_IRQ_OFFSET 0
+
+/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
+ * only on word boundaries.
+ * Not all are used (yet), or are interesting to us (yet).
+ */
+
+/* Things of interest in the CSR.
+ */
+#define BCSR0_LED0             ((uint)0x02000000)      /* 0 == on */
+#define BCSR0_LED1             ((uint)0x01000000)      /* 0 == on */
+#define BCSR1_FETHIEN          ((uint)0x08000000)      /* 0 == enable*/
+#define BCSR1_FETH_RST         ((uint)0x04000000)      /* 0 == reset */
+#define BCSR1_RS232_EN1                ((uint)0x02000000)      /* 0 ==enable */
+#define BCSR1_RS232_EN2                ((uint)0x01000000)      /* 0 ==enable */
+#define BCSR3_FETHIEN2         ((uint)0x10000000)      /* 0 == enable*/
+#define BCSR3_FETH2_RS         ((uint)0x80000000)      /* 0 == reset */
+
+/* cpm serial driver works with constants below */
+
+#define SIU_INT_SMC1           ((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2i          ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1           ((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2           ((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3           ((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4           ((uint)0x2b+CPM_IRQ_OFFSET)
+
+void m82xx_pci_init_irq(void);
+void mpc82xx_ads_show_cpuinfo(struct seq_file*);
+void m82xx_calibrate_decr(void);
+
+#endif /* __MACH_ADS8260_DEFS */
+#endif /* __KERNEL__ */