obj-$(CONFIG_IOSAPIC) += iosapic.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o
+obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o
obj-$(CONFIG_IA64_CYCLONE) += cyclone.o
obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id())
node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu];
}
- build_cpu_to_node_map();
# endif
#endif
+#ifdef CONFIG_ACPI_NUMA
+ build_cpu_to_node_map();
+#endif
/* Make boot-up look pretty */
printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
return 0;
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ia64 kernel NUMA specific stuff
+ *
+ * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ * Jesse Barnes <jbarnes@sgi.com>
+ */
+#include <linux/config.h>
+#include <linux/topology.h>
+#include <linux/module.h>
+#include <asm/processor.h>
+#include <asm/smp.h>
+
+u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_to_node_map);
+
+cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+
+/**
+ * build_cpu_to_node_map - setup cpu to node and node to cpumask arrays
+ *
+ * Build cpu to node mapping and initialize the per node cpu masks using
+ * info from the node_cpuid array handed to us by ACPI.
+ */
+void __init build_cpu_to_node_map(void)
+{
+ int cpu, i, node;
+
+ for(node=0; node < MAX_NUMNODES; node++)
+ cpus_clear(node_to_cpu_mask[node]);
+
+ for(cpu = 0; cpu < NR_CPUS; ++cpu) {
+ node = -1;
+ for (i = 0; i < NR_CPUS; ++i)
+ if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
+ node = node_cpuid[i].nid;
+ break;
+ }
+ cpu_to_node_map[cpu] = (node >= 0) ? node : 0;
+ if (node >= 0)
+ cpu_set(cpu, node_to_cpu_mask[node]);
+ }
+}
}
}
-#ifdef CONFIG_NUMA
-
-/* on which node is each logical CPU (one cacheline even for 64 CPUs) */
-u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
-EXPORT_SYMBOL(cpu_to_node_map);
-/* which logical CPUs are on which nodes */
-cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
-
-/*
- * Build cpu to node mapping and initialize the per node cpu masks.
- */
-void __init
-build_cpu_to_node_map (void)
-{
- int cpu, i, node;
-
- for(node=0; node<MAX_NUMNODES; node++)
- cpus_clear(node_to_cpu_mask[node]);
- for(cpu = 0; cpu < NR_CPUS; ++cpu) {
- /*
- * All Itanium NUMA platforms I know use ACPI, so maybe we
- * can drop this ifdef completely. [EF]
- */
-#ifdef CONFIG_ACPI_NUMA
- node = -1;
- for (i = 0; i < NR_CPUS; ++i)
- if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
- node = node_cpuid[i].nid;
- break;
- }
-#else
-# error Fixme: Dunno how to build CPU-to-node map.
-#endif
- cpu_to_node_map[cpu] = (node >= 0) ? node : 0;
- if (node >= 0)
- cpu_set(cpu, node_to_cpu_mask[node]);
- }
-}
-
-#endif /* CONFIG_NUMA */
-
/*
* Cycle through the APs sending Wakeup IPIs to boot each.
*/
}
/**
+ * per_cpu_node_setup - setup per-cpu areas on each node
+ * @cpu_data: per-cpu area on this node
+ * @node: node to setup
+ *
+ * Copy the static per-cpu data into the region we just set aside and then
+ * setup __per_cpu_offset for each CPU on this node. Return a pointer to
+ * the end of the area.
+ */
+static void *per_cpu_node_setup(void *cpu_data, int node)
+{
+#ifdef CONFIG_SMP
+ int cpu;
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ if (node == node_cpuid[cpu].nid) {
+ memcpy(__va(cpu_data), __phys_per_cpu_start,
+ __per_cpu_end - __per_cpu_start);
+ __per_cpu_offset[cpu] = (char*)__va(cpu_data) -
+ __per_cpu_start;
+ cpu_data += PERCPU_PAGE_SIZE;
+ }
+ }
+#endif
+ return cpu_data;
+}
+
+/**
* fill_pernode - initialize pernode data.
* @node: the node id.
* @pernode: physical address of pernode data
unsigned long pernodesize)
{
void *cpu_data;
- int cpus = early_nr_cpus_node(node), cpu;
+ int cpus = early_nr_cpus_node(node);
struct bootmem_data *bdp = &mem_data[node].bootmem_data;
mem_data[node].pernode_addr = pernode;
mem_data[node].pgdat->bdata = bdp;
pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
- /*
- * Copy the static per-cpu data into the region we
- * just set aside and then setup __per_cpu_offset
- * for each CPU on this node.
- */
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- if (node == node_cpuid[cpu].nid) {
- memcpy(__va(cpu_data), __phys_per_cpu_start,
- __per_cpu_end - __per_cpu_start);
- __per_cpu_offset[cpu] = (char*)__va(cpu_data) -
- __per_cpu_start;
- cpu_data += PERCPU_PAGE_SIZE;
- }
- }
+ cpu_data = per_cpu_node_setup(cpu_data, node);
return;
}
+
/**
* find_pernode_space - allocate memory for memory map and per-node structures
* @start: physical start of range
*/
static void __init initialize_pernode_data(void)
{
- int cpu, node;
pg_data_t *pgdat_list[MAX_NUMNODES];
+ int cpu, node;
for_each_online_node(node)
pgdat_list[node] = mem_data[node].pgdat;
memcpy(mem_data[node].node_data->pg_data_ptrs, pgdat_list,
sizeof(pgdat_list));
}
-
+#ifdef CONFIG_SMP
/* Set the node_data pointer for each per-cpu struct */
for (cpu = 0; cpu < NR_CPUS; cpu++) {
node = node_cpuid[cpu].nid;
per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
}
+#else
+ {
+ struct cpuinfo_ia64 *cpu0_cpu_info;
+ cpu = 0;
+ node = node_cpuid[cpu].nid;
+ cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
+ ((char *)&per_cpu__cpu_info - __per_cpu_start));
+ cpu0_cpu_info->node_data = mem_data[node].node_data;
+ }
+#endif /* CONFIG_SMP */
}
/**
find_initrd();
}
+#ifdef CONFIG_SMP
/**
* per_cpu_init - setup per-cpu variables
*
{
int cpu;
- if (smp_processor_id() == 0) {
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- per_cpu(local_per_cpu_offset, cpu) =
- __per_cpu_offset[cpu];
- }
- }
+ if (smp_processor_id() != 0)
+ return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
}
+#endif /* CONFIG_SMP */
/**
* show_mem - give short summary of memory stats
#ifndef _ASM_IA64_SN_ARCH_H
#define _ASM_IA64_SN_ARCH_H
+#include <linux/numa.h>
#include <asm/types.h>
#include <asm/percpu.h>
#include <asm/sn/types.h>
*
*/
-#ifndef CONFIG_SMP
-#define cpu_physical_id(cpuid) ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
-#endif
-
-
#define get_node_number(addr) NASID_GET(addr)
/*
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff