V4L/DVB (3811): Cxusb: lgh064f: set auxiliary byte in pll_set

This changeset removes pll_init, and instead sets the tuner
auxiliary byte in pll_set.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 1f0d3e9..5151fb4 100644 (file)
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -322,6 +322,36 @@ static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
        return 0;
 }
 
+static int cxusb_lgh064f_pll_set_i2c(struct dvb_frontend *fe,
+                                    struct dvb_frontend_parameters *fep)
+{
+       struct dvb_usb_device *d = fe->dvb->priv;
+       int ret = 0;
+       u8 b[5];
+       struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0,
+                              .buf = &b[1], .len = 4 };
+
+       dvb_usb_pll_set(fe,fep,b);
+
+       if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) {
+               err("tuner i2c write failed for pll_set.");
+               ret = -EREMOTEIO;
+       }
+       msleep(1);
+
+       /* Set the Auxiliary Byte. */
+       b[3] &= ~0x20;
+       b[3] |= 0x18;
+       b[4] = 0x50;
+       if (i2c_transfer(&d->i2c_adap, &msg, 1) != 1) {
+               err("tuner i2c write failed writing auxiliary byte.");
+               ret = -EREMOTEIO;
+       }
+       msleep(1);
+
+       return ret;
+}
+
 static struct cx22702_config cxusb_cx22702_config = {
        .demod_address = 0x63,
 
@@ -334,7 +364,7 @@ static struct cx22702_config cxusb_cx22702_config = {
 static struct lgdt330x_config cxusb_lgdt3303_config = {
        .demod_address = 0x0e,
        .demod_chip    = LGDT3303,
-       .pll_set       = dvb_usb_pll_set_i2c,
+       .pll_set       = cxusb_lgh064f_pll_set_i2c,
 };
 
 static struct mt352_config cxusb_dee1601_config = {
@@ -362,11 +392,7 @@ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_device *d)
 
 static int cxusb_lgh064f_tuner_attach(struct dvb_usb_device *d)
 {
-       u8 bpll[4] = { 0x00, 0x00, 0x18, 0x50 };
-       /* bpll[2] : unset bit 3, set bits 4&5
-          bpll[3] : 0x50 - digital, 0x20 - analog */
        d->pll_addr = 0x61;
-       memcpy(d->pll_init, bpll, 4);
        d->pll_desc = &dvb_pll_tdvs_tua6034;
        return 0;
 }