[netdrvr] delete CONFIG_PHYCONTROL

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4739a63..db88981 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2076,7 +2076,6 @@ config GIANFAR
        tristate "Gianfar Ethernet"
        depends on 85xx || 83xx
        select PHYLIB
-       select PHYCONTROL
        help
          This driver supports the Gigabit TSEC on the MPC85xx 
          family of chips, and the FEC on the 8540

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 14f4de1..c782a63 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -12,14 +12,6 @@ config PHYLIB
          devices.  This option provides infrastructure for
          managing PHY devices.
 
-config PHYCONTROL
-       bool "  Support for automatically handling PHY state changes"
-       depends on PHYLIB
-       help
-         Adds code to perform all the work for keeping PHY link
-         state (speed/duplex/etc) up-to-date.  Also handles
-         interrupts.
-
 comment "MII PHY device drivers"
        depends on PHYLIB
 

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d9e11f9..9209da9 100644 (file)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -242,10 +242,6 @@ EXPORT_SYMBOL(phy_sanitize_settings);
  *   choose the next best ones from the ones selected, so we don't
  *   care if ethtool tries to give us bad values
  *
- * A note about the PHYCONTROL Layer.  If you turn off
- * CONFIG_PHYCONTROL, you will need to read the PHY status
- * registers after this function completes, and update your
- * controller manually.
  */
 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 {
@@ -380,7 +376,6 @@ int phy_start_aneg(struct phy_device *phydev)
 
        err = phydev->drv->config_aneg(phydev);
 
-#ifdef CONFIG_PHYCONTROL
        if (err < 0)
                goto out_unlock;
 
@@ -395,14 +390,12 @@ int phy_start_aneg(struct phy_device *phydev)
        }
 
 out_unlock:
-#endif
        spin_unlock(&phydev->lock);
        return err;
 }
 EXPORT_SYMBOL(phy_start_aneg);
 
 
-#ifdef CONFIG_PHYCONTROL
 static void phy_change(void *data);
 static void phy_timer(unsigned long data);
 
@@ -868,4 +861,3 @@ static void phy_timer(unsigned long data)
        mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
 }
 
-#endif /* CONFIG_PHYCONTROL */

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 33f7bdb..6da1aa0 100644 (file)
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -101,7 +101,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
        return dev;
 }
 
-#ifdef CONFIG_PHYCONTROL
 /* phy_prepare_link:
  *
  * description: Tells the PHY infrastructure to handle the
@@ -160,8 +159,6 @@ void phy_disconnect(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_disconnect);
 
-#endif /* CONFIG_PHYCONTROL */
-
 /* phy_attach:
  *
  *   description: Called by drivers to attach to a particular PHY