bnx2x: Removing redundant device parameters

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a18ace0..2397a89 100644 (file)
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -525,8 +525,6 @@ struct bnx2x_common {
        u32                     hw_config;
 
        u32                     bc_ver;
-
-       char                    *name;
 };
 
 
@@ -798,7 +796,6 @@ struct bnx2x {
 #endif
 
        u32                     rx_csum;
-       u32                     rx_offset;
        u32                     rx_buf_size;
 #define ETH_OVREHEAD                   (ETH_HLEN + 8)  /* 8 for CRC + VLAN */
 #define ETH_MIN_PACKET_SIZE            60
@@ -819,7 +816,6 @@ struct bnx2x {
        u16                     def_att_idx;
        u32                     attn_state;
        struct attn_route       attn_group[MAX_DYNAMIC_ATTN_GRPS];
-       u32                     nig_mask;
 
        /* slow path ring */
        struct eth_spe          *spq;
@@ -869,7 +865,6 @@ struct bnx2x {
        struct work_struct      reset_task;
 
        struct timer_list       timer;
-       int                     timer_interval;
        int                     current_interval;
 
        u16                     fw_seq;

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index f448658..9c40b02 100644 (file)
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1089,8 +1089,7 @@ static void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp,
 
        pci_dma_sync_single_for_device(bp->pdev,
                                       pci_unmap_addr(cons_rx_buf, mapping),
-                                      bp->rx_offset + RX_COPY_THRESH,
-                                      PCI_DMA_FROMDEVICE);
+                                      RX_COPY_THRESH, PCI_DMA_FROMDEVICE);
 
        prod_rx_buf->skb = cons_rx_buf->skb;
        pci_unmap_addr_set(prod_rx_buf, mapping,
@@ -2403,6 +2402,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
        u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
                                       NIG_REG_MASK_INTERRUPT_PORT0;
        u32 aeu_mask;
+       u32 nig_mask = 0;
 
        if (bp->attn_state & asserted)
                BNX2X_ERR("IGU ERROR\n");
@@ -2428,7 +2428,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
                        bnx2x_acquire_phy_lock(bp);
 
                        /* save nig interrupt mask */
-                       bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
+                       nig_mask = REG_RD(bp, nig_int_mask_addr);
                        REG_WR(bp, nig_int_mask_addr, 0);
 
                        bnx2x_link_attn(bp);
@@ -2483,7 +2483,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
        /* now set back the mask */
        if (asserted & ATTN_NIG_FOR_FUNC) {
-               REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+               REG_WR(bp, nig_int_mask_addr, nig_mask);
                bnx2x_release_phy_lock(bp);
        }
 }
@@ -4358,7 +4358,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
        u16 ring_prod, cqe_ring_prod;
        int i, j;
 
-       bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD + BNX2X_RX_ALIGN;
+       bp->rx_buf_size = bp->dev->mtu + ETH_OVREHEAD + BNX2X_RX_ALIGN;
        DP(NETIF_MSG_IFUP,
           "mtu %d  rx_buf_size %d\n", bp->dev->mtu, bp->rx_buf_size);
 
@@ -7947,6 +7947,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 {
        int func = BP_FUNC(bp);
+       int timer_interval;
        int rc;
 
        /* Disable interrupt handling until HW is initialized */
@@ -7994,13 +7995,12 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
        bp->rx_ring_size = MAX_RX_AVAIL;
 
        bp->rx_csum = 1;
-       bp->rx_offset = 0;
 
        bp->tx_ticks = 50;
        bp->rx_ticks = 25;
 
-       bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
-       bp->current_interval = (poll ? poll : bp->timer_interval);
+       timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
+       bp->current_interval = (poll ? poll : timer_interval);
 
        init_timer(&bp->timer);
        bp->timer.expires = jiffies + bp->current_interval;
@@ -10828,9 +10828,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
                goto init_one_exit;
        }
 
-       bp->common.name = board_info[ent->driver_data].name;
        printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
-              " IRQ %d, ", dev->name, bp->common.name,
+              " IRQ %d, ", dev->name, board_info[ent->driver_data].name,
               (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
               bnx2x_get_pcie_width(bp),
               (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",