leds: Remove uneeded leds-cm-x270 driver
authorRichard Purdie <rpurdie@linux.intel.com>
Mon, 20 Oct 2008 21:55:00 +0000 (22:55 +0100)
committerRichard Purdie <rpurdie@linux.intel.com>
Mon, 20 Oct 2008 21:55:00 +0000 (22:55 +0100)
The cm-x270 board uses leds-gpio so remove the now unneeded driver.

Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
drivers/leds/Kconfig
drivers/leds/Makefile
drivers/leds/leds-cm-x270.c [deleted file]

index 2a72ce5..a4f7a3a 100644 (file)
@@ -113,12 +113,6 @@ config LEDS_GPIO
          outputs. To be useful the particular board must have LEDs
          and they must be connected to the GPIO lines.
 
-config LEDS_CM_X270
-       tristate "LED Support for the CM-X270 LEDs"
-       depends on LEDS_CLASS && MACH_ARMCORE
-       help
-         This option enables support for the CM-X270 LEDs.
-
 config LEDS_CLEVO_MAIL
        tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
        depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
index 07d937f..64e21e4 100644 (file)
@@ -17,7 +17,6 @@ obj-$(CONFIG_LEDS_COBALT_RAQ)         += leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_SUNFIRE)             += leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)             += leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)                        += leds-gpio.o
-obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)          += leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)               += leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)                 += leds-fsg.o
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
deleted file mode 100644 (file)
index 836a43d..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * drivers/leds/leds-cm-x270.c
- *
- * Copyright 2007 CompuLab Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on leds-corgi.c
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-
-#define GPIO_RED_LED                   (93)
-#define GPIO_GREEN_LED                 (94)
-
-static void cmx270_red_set(struct led_classdev *led_cdev,
-                          enum led_brightness value)
-{
-       if (value)
-               GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-       else
-               GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-}
-
-static void cmx270_green_set(struct led_classdev *led_cdev,
-                            enum led_brightness value)
-{
-       if (value)
-               GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-       else
-               GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-}
-
-static struct led_classdev cmx270_red_led = {
-       .name                   = "cm-x270:red",
-       .default_trigger        = "nand-disk",
-       .brightness_set         = cmx270_red_set,
-};
-
-static struct led_classdev cmx270_green_led = {
-       .name                   = "cm-x270:green",
-       .default_trigger        = "heartbeat",
-       .brightness_set         = cmx270_green_set,
-};
-
-#ifdef CONFIG_PM
-static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
-{
-       led_classdev_suspend(&cmx270_red_led);
-       led_classdev_suspend(&cmx270_green_led);
-       return 0;
-}
-
-static int cmx270led_resume(struct platform_device *dev)
-{
-       led_classdev_resume(&cmx270_red_led);
-       led_classdev_resume(&cmx270_green_led);
-       return 0;
-}
-#endif
-
-static int cmx270led_probe(struct platform_device *pdev)
-{
-       int ret;
-
-       ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
-       if (ret < 0)
-               return ret;
-
-       ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
-       if (ret < 0)
-               led_classdev_unregister(&cmx270_red_led);
-
-       return ret;
-}
-
-static int cmx270led_remove(struct platform_device *pdev)
-{
-       led_classdev_unregister(&cmx270_red_led);
-       led_classdev_unregister(&cmx270_green_led);
-       return 0;
-}
-
-static struct platform_driver cmx270led_driver = {
-       .probe          = cmx270led_probe,
-       .remove         = cmx270led_remove,
-#ifdef CONFIG_PM
-       .suspend        = cmx270led_suspend,
-       .resume         = cmx270led_resume,
-#endif
-       .driver         = {
-               .name           = "cm-x270-led",
-               .owner          = THIS_MODULE,
-       },
-};
-
-static int __init cmx270led_init(void)
-{
-       return platform_driver_register(&cmx270led_driver);
-}
-
-static void __exit cmx270led_exit(void)
-{
-       platform_driver_unregister(&cmx270led_driver);
-}
-
-module_init(cmx270led_init);
-module_exit(cmx270led_exit);
-
-MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
-MODULE_DESCRIPTION("CM-x270 LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:cm-x270-led");