cmd640: use ide_find_port()
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 26 Apr 2008 15:36:33 +0000 (17:36 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 26 Apr 2008 15:36:33 +0000 (17:36 +0200)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/cmd640.c

index 3303ffb..fed9341 100644 (file)
@@ -744,18 +744,19 @@ static int __init cmd640x_init(void)
        printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
                         "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
 
-       cmd_hwif0 = &ide_hwifs[0];
-       cmd_hwif1 = &ide_hwifs[1];
+       cmd_hwif0 = ide_find_port();
 
        /*
         * Initialize data for primary port
         */
-       ide_init_port_hw(cmd_hwif0, &hw[0]);
+       if (cmd_hwif0) {
+               ide_init_port_hw(cmd_hwif0, &hw[0]);
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-       cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
+               cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
-       idx[0] = cmd_hwif0->index;
+               idx[0] = cmd_hwif0->index;
+       }
 
        /*
         * Ensure compatibility by always using the slowest timings
@@ -767,10 +768,13 @@ static int __init cmd640x_init(void)
        put_cmd640_reg(CMDTIM, 0);
        put_cmd640_reg(BRST, 0x40);
 
+       cmd_hwif1 = ide_find_port();
+
        /*
         * Try to enable the secondary interface, if not already enabled
         */
-       if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
+       if (cmd_hwif1 &&
+           cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
                port2 = "not probed";
        } else {
                b = get_cmd640_reg(CNTRL);
@@ -801,7 +805,7 @@ static int __init cmd640x_init(void)
        /*
         * Initialize data for secondary cmd640 port, if enabled
         */
-       if (second_port_cmd640) {
+       if (second_port_cmd640 && cmd_hwif1) {
                ide_init_port_hw(cmd_hwif1, &hw[1]);
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
                cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
@@ -809,7 +813,7 @@ static int __init cmd640x_init(void)
 
                idx[1] = cmd_hwif1->index;
        }
-       printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
+       printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
                         second_port_cmd640 ? "" : "not ", port2);
 
        /*
@@ -819,10 +823,15 @@ static int __init cmd640x_init(void)
        for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
                ide_drive_t *drive;
 
-               if (index > 1)
+               if (index > 1) {
+                       if (cmd_hwif1 == NULL)
+                               continue;
                        drive = &cmd_hwif1->drives[index & 1];
-               else
+               } else  {
+                       if (cmd_hwif0 == NULL)
+                               continue;
                        drive = &cmd_hwif0->drives[index & 1];
+               }
 
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
                if (drive->autotune || ((index > 1) && second_port_toggled)) {