[ISDN] HiSax: move card setup into separate function

No behavior changes, just code movement.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index a43162c..6bc49e6 100644 (file)
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -847,95 +847,10 @@ static int init_card(struct IsdnCardState *cs)
        return 3;
 }
 
-static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockowner)
+static int hisax_cs_setup_card(struct IsdnCard *card)
 {
-       int ret = 0;
-       struct IsdnCard *card = cards + cardnr;
-       struct IsdnCardState *cs;
-
-       cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
-       if (!cs) {
-               printk(KERN_WARNING
-                      "HiSax: No memory for IsdnCardState(card %d)\n",
-                      cardnr + 1);
-               goto out;
-       }
-       card->cs = cs;
-       spin_lock_init(&cs->statlock);
-       spin_lock_init(&cs->lock);
-       cs->chanlimit = 2;      /* maximum B-channel number */
-       cs->logecho = 0;        /* No echo logging */
-       cs->cardnr = cardnr;
-       cs->debug = L1_DEB_WARN;
-       cs->HW_Flags = 0;
-       cs->busy_flag = busy_flag;
-       cs->irq_flags = I4L_IRQ_FLAG;
-#if TEI_PER_CARD
-       if (card->protocol == ISDN_PTYPE_NI1)
-               test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
-#else
-       test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
-#endif
-       cs->protocol = card->protocol;
-
-       if (card->typ <= 0 || card->typ > ISDN_CTYPE_COUNT) {
-               printk(KERN_WARNING
-                      "HiSax: Card Type %d out of range\n", card->typ);
-               goto outf_cs;
-       }
-       if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_ATOMIC))) {
-               printk(KERN_WARNING
-                      "HiSax: No memory for dlog(card %d)\n", cardnr + 1);
-               goto outf_cs;
-       }
-       if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_ATOMIC))) {
-               printk(KERN_WARNING
-                      "HiSax: No memory for status_buf(card %d)\n",
-                      cardnr + 1);
-               goto outf_dlog;
-       }
-       cs->stlist = NULL;
-       cs->status_read = cs->status_buf;
-       cs->status_write = cs->status_buf;
-       cs->status_end = cs->status_buf + HISAX_STATUS_BUFSIZE - 1;
-       cs->typ = card->typ;
-#ifdef MODULE
-       cs->iif.owner = lockowner;
-#endif
-       strcpy(cs->iif.id, id);
-       cs->iif.channels = 2;
-       cs->iif.maxbufsize = MAX_DATA_SIZE;
-       cs->iif.hl_hdrlen = MAX_HEADER_LEN;
-       cs->iif.features =
-               ISDN_FEATURE_L2_X75I |
-               ISDN_FEATURE_L2_HDLC |
-               ISDN_FEATURE_L2_HDLC_56K |
-               ISDN_FEATURE_L2_TRANS |
-               ISDN_FEATURE_L3_TRANS |
-#ifdef CONFIG_HISAX_1TR6
-               ISDN_FEATURE_P_1TR6 |
-#endif
-#ifdef CONFIG_HISAX_EURO
-               ISDN_FEATURE_P_EURO |
-#endif
-#ifdef CONFIG_HISAX_NI1
-               ISDN_FEATURE_P_NI1 |
-#endif
-               0;
+       int ret;
 
-       cs->iif.command = HiSax_command;
-       cs->iif.writecmd = NULL;
-       cs->iif.writebuf_skb = HiSax_writebuf_skb;
-       cs->iif.readstat = HiSax_readstatus;
-       register_isdn(&cs->iif);
-       cs->myid = cs->iif.channels;
-       printk(KERN_INFO
-              "HiSax: Card %d Protocol %s Id=%s (%d)\n", cardnr + 1,
-              (card->protocol == ISDN_PTYPE_1TR6) ? "1TR6" :
-              (card->protocol == ISDN_PTYPE_EURO) ? "EDSS1" :
-              (card->protocol == ISDN_PTYPE_LEASED) ? "LEASED" :
-              (card->protocol == ISDN_PTYPE_NI1) ? "NI1" :
-              "NONE", cs->iif.id, cs->myid);
        switch (card->typ) {
 #if CARD_TELES0
        case ISDN_CTYPE_16_0:
@@ -1094,13 +1009,109 @@ static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockow
                printk(KERN_WARNING
                       "HiSax: Support for %s Card not selected\n",
                       CardType[card->typ]);
-               ll_unload(cs);
+               ret = 0;
+               break;
+       }
+
+       return ret;
+}
+
+static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockowner)
+{
+       int ret = 0;
+       struct IsdnCard *card = cards + cardnr;
+       struct IsdnCardState *cs;
+
+       cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
+       if (!cs) {
+               printk(KERN_WARNING
+                      "HiSax: No memory for IsdnCardState(card %d)\n",
+                      cardnr + 1);
+               goto out;
+       }
+       card->cs = cs;
+       spin_lock_init(&cs->statlock);
+       spin_lock_init(&cs->lock);
+       cs->chanlimit = 2;      /* maximum B-channel number */
+       cs->logecho = 0;        /* No echo logging */
+       cs->cardnr = cardnr;
+       cs->debug = L1_DEB_WARN;
+       cs->HW_Flags = 0;
+       cs->busy_flag = busy_flag;
+       cs->irq_flags = I4L_IRQ_FLAG;
+#if TEI_PER_CARD
+       if (card->protocol == ISDN_PTYPE_NI1)
+               test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
+#else
+       test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
+#endif
+       cs->protocol = card->protocol;
+
+       if (card->typ <= 0 || card->typ > ISDN_CTYPE_COUNT) {
+               printk(KERN_WARNING
+                      "HiSax: Card Type %d out of range\n", card->typ);
                goto outf_cs;
        }
+       if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_ATOMIC))) {
+               printk(KERN_WARNING
+                      "HiSax: No memory for dlog(card %d)\n", cardnr + 1);
+               goto outf_cs;
+       }
+       if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_ATOMIC))) {
+               printk(KERN_WARNING
+                      "HiSax: No memory for status_buf(card %d)\n",
+                      cardnr + 1);
+               goto outf_dlog;
+       }
+       cs->stlist = NULL;
+       cs->status_read = cs->status_buf;
+       cs->status_write = cs->status_buf;
+       cs->status_end = cs->status_buf + HISAX_STATUS_BUFSIZE - 1;
+       cs->typ = card->typ;
+#ifdef MODULE
+       cs->iif.owner = lockowner;
+#endif
+       strcpy(cs->iif.id, id);
+       cs->iif.channels = 2;
+       cs->iif.maxbufsize = MAX_DATA_SIZE;
+       cs->iif.hl_hdrlen = MAX_HEADER_LEN;
+       cs->iif.features =
+               ISDN_FEATURE_L2_X75I |
+               ISDN_FEATURE_L2_HDLC |
+               ISDN_FEATURE_L2_HDLC_56K |
+               ISDN_FEATURE_L2_TRANS |
+               ISDN_FEATURE_L3_TRANS |
+#ifdef CONFIG_HISAX_1TR6
+               ISDN_FEATURE_P_1TR6 |
+#endif
+#ifdef CONFIG_HISAX_EURO
+               ISDN_FEATURE_P_EURO |
+#endif
+#ifdef CONFIG_HISAX_NI1
+               ISDN_FEATURE_P_NI1 |
+#endif
+               0;
+
+       cs->iif.command = HiSax_command;
+       cs->iif.writecmd = NULL;
+       cs->iif.writebuf_skb = HiSax_writebuf_skb;
+       cs->iif.readstat = HiSax_readstatus;
+       register_isdn(&cs->iif);
+       cs->myid = cs->iif.channels;
+       printk(KERN_INFO
+              "HiSax: Card %d Protocol %s Id=%s (%d)\n", cardnr + 1,
+              (card->protocol == ISDN_PTYPE_1TR6) ? "1TR6" :
+              (card->protocol == ISDN_PTYPE_EURO) ? "EDSS1" :
+              (card->protocol == ISDN_PTYPE_LEASED) ? "LEASED" :
+              (card->protocol == ISDN_PTYPE_NI1) ? "NI1" :
+              "NONE", cs->iif.id, cs->myid);
+
+       ret = hisax_cs_setup_card(card);
        if (!ret) {
                ll_unload(cs);
                goto outf_cs;
        }
+
        if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_ATOMIC))) {
                printk(KERN_WARNING "HiSax: No memory for isac rcvbuf\n");
                ll_unload(cs);