config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
S: Maintained
INOTIFY
-P: John McCutchan and Robert Love
-M: ttb@tentacle.dhs.org and rml@novell.com
+P: John McCutchan
+M: ttb@tentacle.dhs.org
+P: Robert Love
+M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config and'
+ @echo ' clean - Remove most generated files but keep the config and'
@echo ' enough build support to build external modules'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
- device = kmalloc(sizeof(*device), GFP_KERNEL);
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
return(1);
}
- memset(device, 0, sizeof(*device));
INIT_LIST_HEAD(&device->list);
device->index = n;
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
#include <linux/i2c.h>
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net.");
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
MODULE_LICENSE("GPL");
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
}
if ( (retval = pci_request_regions(dev, "icom"))) {
- dev_err(&dev->dev, "pci_request_region FAILED\n");
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
}
Ext2 is a standard Linux file system for hard disks.
To compile this file system support as a module, choose M here: the
- module will be called ext2. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext2.
If unsure, say Y.
(available at <http://sourceforge.net/projects/e2fsprogs/>).
To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
+ module will be called ext3.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
features will be added to ext4dev gradually.
To compile this file system support as a module, choose M here. The
- module will be called ext4dev. Be aware, however, that the filesystem
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext4dev.
If unsure, say N.
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
- loadmap = kmalloc(size, GFP_KERNEL);
+ loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
- memset(loadmap, 0, size);
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
#error no compiler-gcc.h file for this gcc version
#elif __GNUC__ == 4
# include <linux/compiler-gcc4.h>
-#elif __GNUC__ == 3
+#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2
# include <linux/compiler-gcc3.h>
#else
# error Sorry, your compiler is too old/not recognized.
void (*drop_item)(struct config_group *group, struct config_item *item);
};
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#if 0
-#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \
- .show = _show, \
- .store = _store, \
-}
-
-#define __ATTR_RO(_name) { \
- .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \
- .show = _name##_show, \
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-#endif
-
-
struct configfs_subsystem {
struct config_group su_group;
struct semaphore su_sem;
** the sysctl() binary interface. Do *NOT* change the
** numbering of any existing values here, and do not change
** any numbers within any one set of values. If you have to
- ** have to redefine an existing interface, use a new number for it.
+ ** redefine an existing interface, use a new number for it.
** The kernel will then return -ENOTDIR to any application using
** the old binary interface.
**
If unsure say Y here.
config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
Provide fault-injection capability for alloc_pages().
config FAIL_MAKE_REQUEST
- bool "Fault-injection capabilitiy for disk IO"
+ bool "Fault-injection capability for disk IO"
depends on FAULT_INJECTION
help
Provide fault-injection capability for disk IO.
} else {
struct sk_buff *free_it = next;
- /* Old fragmnet is completely overridden with
+ /* Old fragment is completely overridden with
* new one drop it.
*/
next = next->next;
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---