[POWERPC] Add debugging trigger to Axon MSI code

This adds some debugging code to the Axon MSI driver.  It creates a
file per MSIC in /sys/kernel/debug/powerpc, which allows the user to
trigger a fake MSI interrupt by writing to the file.

This can be used to test some of the MSI generation path.  In
particular, that the MSIC recognises a write to the MSI address,
generates an interrupt and writes the MSI packet into the ring buffer.

All the code is inside #ifdef DEBUG so it causes no harm unless it's
enabled.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c39f5c2..8b055bc 100644 (file)
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_platform.h>
+#include <linux/debugfs.h>
 
 #include <asm/dcr.h>
 #include <asm/machdep.h>
@@ -69,8 +70,19 @@ struct axon_msic {
        dma_addr_t fifo_phys;
        dcr_host_t dcr_host;
        u32 read_offset;
+#ifdef DEBUG
+       u32 __iomem *trigger;
+#endif
 };
 
+#ifdef DEBUG
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic);
+#else
+static inline void axon_msi_debug_setup(struct device_node *dn,
+                                       struct axon_msic *msic) { }
+#endif
+
+
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
        pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
@@ -381,6 +393,8 @@ static int axon_msi_probe(struct of_device *device,
        ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
        ppc_md.msi_check_device = axon_msi_check_device;
 
+       axon_msi_debug_setup(dn, msic);
+
        printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name);
 
        return 0;
@@ -418,3 +432,47 @@ static int __init axon_msi_init(void)
        return of_register_platform_driver(&axon_msi_driver);
 }
 subsys_initcall(axon_msi_init);
+
+
+#ifdef DEBUG
+static int msic_set(void *data, u64 val)
+{
+       struct axon_msic *msic = data;
+       out_le32(msic->trigger, val);
+       return 0;
+}
+
+static int msic_get(void *data, u64 *val)
+{
+       *val = 0;
+       return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n");
+
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
+{
+       char name[8];
+       u64 addr;
+
+       addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
+       if (addr == OF_BAD_ADDR) {
+               pr_debug("axon_msi: couldn't translate reg property\n");
+               return;
+       }
+
+       msic->trigger = ioremap(addr, 0x4);
+       if (!msic->trigger) {
+               pr_debug("axon_msi: ioremap failed\n");
+               return;
+       }
+
+       snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
+
+       if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
+                                msic, &fops_msic)) {
+               pr_debug("axon_msi: debugfs_create_file failed!\n");
+               return;
+       }
+}
+#endif /* DEBUG */