[TG3]: Add 5709 PHY support.

Add support for the 5709 10/100 PHY.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2b062d7..23f5744 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1035,6 +1035,24 @@ out:
                                 phy_reg | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
        }
 
+       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+               u32 phy_reg;
+
+               /* adjust output voltage */
+               tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
+
+               if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) {
+                       u32 phy_reg2;
+
+                       tg3_writephy(tp, MII_TG3_EPHY_TEST,
+                                    phy_reg | MII_TG3_EPHY_SHADOW_EN);
+                       /* Enable auto-MDIX */
+                       if (!tg3_readphy(tp, 0x10, &phy_reg2))
+                               tg3_writephy(tp, 0x10, phy_reg2 | 0x4000);
+                       tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg);
+               }
+       }
+
        tg3_phy_set_wirespeed(tp);
        return 0;
 }
@@ -1151,8 +1169,11 @@ static void tg3_power_down_phy(struct tg3 *tp)
        if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
                return;
 
-       tg3_writephy(tp, MII_TG3_EXT_CTRL, MII_TG3_EXT_CTRL_FORCE_LED_OFF);
-       tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+       if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+               tg3_writephy(tp, MII_TG3_EXT_CTRL,
+                            MII_TG3_EXT_CTRL_FORCE_LED_OFF);
+               tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+       }
 
        /* The PHY should not be powered down on some chips because
         * of bugs.
@@ -1505,6 +1526,13 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
                break;
 
        default:
+               if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+                       *speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
+                                SPEED_10;
+                       *duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
+                                 DUPLEX_HALF;
+                       break;
+               }
                *speed = SPEED_INVALID;
                *duplex = DUPLEX_INVALID;
                break;
@@ -1787,7 +1815,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 
        if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
                tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
-       else
+       else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
                tg3_writephy(tp, MII_TG3_IMASK, ~0);
 
        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -6552,7 +6580,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
        if (err)
                return err;
 
-       if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+       if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+           GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
                u32 tmp;
 
                /* Clear CRC stats. */

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2f5e00c..9259d12 100644 (file)
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1624,6 +1624,7 @@
 #define MII_TG3_DSP_RW_PORT            0x15 /* DSP coefficient read/write port */
 
 #define MII_TG3_DSP_ADDRESS            0x17 /* DSP address register */
+#define MII_TG3_EPHY_PTEST             0x17 /* 5906 PHY register */
 
 #define MII_TG3_AUX_CTRL               0x18 /* auxilliary control register */
 
@@ -1637,6 +1638,8 @@
 #define MII_TG3_AUX_STAT_100FULL       0x0500
 #define MII_TG3_AUX_STAT_1000HALF      0x0600
 #define MII_TG3_AUX_STAT_1000FULL      0x0700
+#define MII_TG3_AUX_STAT_100           0x0008
+#define MII_TG3_AUX_STAT_FULL          0x0001
 
 #define MII_TG3_ISTAT                  0x1a /* IRQ status register */
 #define MII_TG3_IMASK                  0x1b /* IRQ mask register */
@@ -1647,6 +1650,9 @@
 #define MII_TG3_INT_DUPLEXCHG          0x0008
 #define MII_TG3_INT_ANEG_PAGE_RX       0x0400
 
+#define MII_TG3_EPHY_TEST              0x1f /* 5906 PHY register */
+#define MII_TG3_EPHY_SHADOW_EN         0x80
+
 /* There are two ways to manage the TX descriptors on the tigon3.
  * Either the descriptors are in host DMA'able memory, or they
  * exist only in the cards on-chip SRAM.  All 16 send bds are under