If unsure, say N
+source "drivers/hid/usbhid/Kconfig"
+
endmenu
obj-$(CONFIG_HID) += hid.o
hid-$(CONFIG_HID_DEBUG) += hid-debug.o
+obj-$(CONFIG_USB_HID) += usbhid/
+obj-$(CONFIG_USB_MOUSE) += usbhid/
+obj-$(CONFIG_USB_KBD) += usbhid/
+
--- /dev/null
+comment "USB Input Devices"
+ depends on USB
+
+config USB_HID
+ tristate "USB Human Interface Device (full HID) support"
+ default y
+ depends on USB && INPUT
+ select HID
+ ---help---
+ Say Y here if you want full HID support to connect USB keyboards,
+ mice, joysticks, graphic tablets, or any other HID based devices
+ to your computer via USB, as well as Uninterruptible Power Supply
+ (UPS) and monitor control devices.
+
+ You can't use this driver and the HIDBP (Boot Protocol) keyboard
+ and mouse drivers at the same time. More information is available:
+ <file:Documentation/input/input.txt>.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbhid.
+
+comment "Input core support is needed for USB HID input layer or HIDBP support"
+ depends on USB_HID && INPUT=n
+
+config USB_HIDINPUT_POWERBOOK
+ bool "Enable support for iBook/PowerBook special keys"
+ default n
+ depends on USB_HID
+ help
+ Say Y here if you want support for the special keys (Fn, Numlock) on
+ Apple iBooks and PowerBooks.
+
+ If unsure, say N.
+
+config HID_FF
+ bool "Force feedback support (EXPERIMENTAL)"
+ depends on USB_HID && EXPERIMENTAL
+ help
+ Say Y here is you want force feedback support for a few HID devices.
+ See below for a list of supported devices.
+
+ See <file:Documentation/input/ff.txt> for a description of the force
+ feedback API.
+
+ If unsure, say N.
+
+config HID_PID
+ bool "PID device support"
+ depends on HID_FF
+ help
+ Say Y here if you have a PID-compliant device and wish to enable force
+ feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
+ devices.
+
+config LOGITECH_FF
+ bool "Logitech devices support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you have one of these devices:
+ - Logitech WingMan Cordless RumblePad
+ - Logitech WingMan Cordless RumblePad 2
+ - Logitech WingMan Force 3D
+ - Logitech Formula Force EX
+ - Logitech MOMO Force wheel
+
+ and if you want to enable force feedback for them.
+ Note: if you say N here, this device will still be supported, but without
+ force feedback.
+
+config PANTHERLORD_FF
+ bool "PantherLord USB/PS2 2in1 Adapter support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
+ to enable force feedback support for it.
+
+config THRUSTMASTER_FF
+ bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
+ depends on HID_FF && EXPERIMENTAL
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
+ and want to enable force feedback support for it.
+ Note: if you say N here, this device will still be supported, but without
+ force feedback.
+
+config ZEROPLUS_FF
+ bool "Zeroplus based game controller support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you have a Zeroplus based game controller and want to
+ enable force feedback for it.
+
+config USB_HIDDEV
+ bool "/dev/hiddev raw HID device support"
+ depends on USB_HID
+ help
+ Say Y here if you want to support HID devices (from the USB
+ specification standpoint) that aren't strictly user interface
+ devices, like monitor controls and Uninterruptable Power Supplies.
+
+ This module supports these devices separately using a separate
+ event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
+
+ If unsure, say Y.
+
+menu "USB HID Boot Protocol drivers"
+ depends on USB!=n && USB_HID!=y
+
+config USB_KBD
+ tristate "USB HIDBP Keyboard (simple Boot) support"
+ depends on USB && INPUT
+ ---help---
+ Say Y here only if you are absolutely sure that you don't want
+ to use the generic HID driver for your USB keyboard and prefer
+ to use the keyboard in its limited Boot Protocol mode instead.
+
+ This is almost certainly not what you want. This is mostly
+ useful for embedded applications or simple keyboards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbkbd.
+
+ If even remotely unsure, say N.
+
+config USB_MOUSE
+ tristate "USB HIDBP Mouse (simple Boot) support"
+ depends on USB && INPUT
+ ---help---
+ Say Y here only if you are absolutely sure that you don't want
+ to use the generic HID driver for your USB mouse and prefer
+ to use the mouse in its limited Boot Protocol mode instead.
+
+ This is almost certainly not what you want. This is mostly
+ useful for embedded applications or simple mice.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbmouse.
+
+ If even remotely unsure, say N.
+
+endmenu
+
+
--- /dev/null
+#
+# Makefile for the USB input drivers
+#
+
+# Multipart objects.
+usbhid-objs := hid-core.o
+
+# Optional parts of multipart objects.
+
+ifeq ($(CONFIG_USB_HIDDEV),y)
+ usbhid-objs += hiddev.o
+endif
+ifeq ($(CONFIG_HID_PID),y)
+ usbhid-objs += hid-pidff.o
+endif
+ifeq ($(CONFIG_LOGITECH_FF),y)
+ usbhid-objs += hid-lgff.o
+endif
+ifeq ($(CONFIG_PANTHERLORD_FF),y)
+ usbhid-objs += hid-plff.o
+endif
+ifeq ($(CONFIG_THRUSTMASTER_FF),y)
+ usbhid-objs += hid-tmff.o
+endif
+ifeq ($(CONFIG_ZEROPLUS_FF),y)
+ usbhid-objs += hid-zpff.o
+endif
+ifeq ($(CONFIG_HID_FF),y)
+ usbhid-objs += hid-ff.o
+endif
+
+obj-$(CONFIG_USB_HID) += usbhid.o
+obj-$(CONFIG_USB_KBD) += usbkbd.o
+obj-$(CONFIG_USB_MOUSE) += usbmouse.o
+
obj-$(CONFIG_USB_ACECAD) += input/
obj-$(CONFIG_USB_AIPTEK) += input/
obj-$(CONFIG_USB_ATI_REMOTE) += input/
-obj-$(CONFIG_USB_HID) += input/
-obj-$(CONFIG_USB_KBD) += input/
obj-$(CONFIG_USB_KBTAB) += input/
-obj-$(CONFIG_USB_MOUSE) += input/
obj-$(CONFIG_USB_MTOUCH) += input/
obj-$(CONFIG_USB_POWERMATE) += input/
obj-$(CONFIG_USB_WACOM) += input/
comment "USB Input Devices"
depends on USB
-config USB_HID
- tristate "USB Human Interface Device (full HID) support"
- default y
- depends on USB && INPUT
- select HID
- ---help---
- Say Y here if you want full HID support to connect USB keyboards,
- mice, joysticks, graphic tablets, or any other HID based devices
- to your computer via USB, as well as Uninterruptible Power Supply
- (UPS) and monitor control devices.
-
- You can't use this driver and the HIDBP (Boot Protocol) keyboard
- and mouse drivers at the same time. More information is available:
- <file:Documentation/input/input.txt>.
-
- If unsure, say Y.
-
- To compile this driver as a module, choose M here: the
- module will be called usbhid.
-
-comment "Input core support is needed for USB HID input layer or HIDBP support"
- depends on USB_HID && INPUT=n
-
-config USB_HIDINPUT_POWERBOOK
- bool "Enable support for iBook/PowerBook special keys"
- default n
- depends on USB_HID
- help
- Say Y here if you want support for the special keys (Fn, Numlock) on
- Apple iBooks and PowerBooks.
-
- If unsure, say N.
-
-config HID_FF
- bool "Force feedback support (EXPERIMENTAL)"
- depends on USB_HID && EXPERIMENTAL
- help
- Say Y here is you want force feedback support for a few HID devices.
- See below for a list of supported devices.
-
- See <file:Documentation/input/ff.txt> for a description of the force
- feedback API.
-
- If unsure, say N.
-
-config HID_PID
- bool "PID device support"
- depends on HID_FF
- help
- Say Y here if you have a PID-compliant device and wish to enable force
- feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
- devices.
-
-config LOGITECH_FF
- bool "Logitech devices support"
- depends on HID_FF
- select INPUT_FF_MEMLESS if USB_HID
- help
- Say Y here if you have one of these devices:
- - Logitech WingMan Cordless RumblePad
- - Logitech WingMan Cordless RumblePad 2
- - Logitech WingMan Force 3D
- - Logitech Formula Force EX
- - Logitech MOMO Force wheel
-
- and if you want to enable force feedback for them.
- Note: if you say N here, this device will still be supported, but without
- force feedback.
-
-config PANTHERLORD_FF
- bool "PantherLord USB/PS2 2in1 Adapter support"
- depends on HID_FF
- select INPUT_FF_MEMLESS if USB_HID
- help
- Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
- to enable force feedback support for it.
-
-config THRUSTMASTER_FF
- bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
- depends on HID_FF && EXPERIMENTAL
- select INPUT_FF_MEMLESS if USB_HID
- help
- Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
- and want to enable force feedback support for it.
- Note: if you say N here, this device will still be supported, but without
- force feedback.
-
-config ZEROPLUS_FF
- bool "Zeroplus based game controller support"
- depends on HID_FF
- select INPUT_FF_MEMLESS if USB_HID
- help
- Say Y here if you have a Zeroplus based game controller and want to
- enable force feedback for it.
-
-config USB_HIDDEV
- bool "/dev/hiddev raw HID device support"
- depends on USB_HID
- help
- Say Y here if you want to support HID devices (from the USB
- specification standpoint) that aren't strictly user interface
- devices, like monitor controls and Uninterruptable Power Supplies.
-
- This module supports these devices separately using a separate
- event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
-
- If unsure, say Y.
-
-menu "USB HID Boot Protocol drivers"
- depends on USB!=n && USB_HID!=y
-
-config USB_KBD
- tristate "USB HIDBP Keyboard (simple Boot) support"
- depends on USB && INPUT
- ---help---
- Say Y here only if you are absolutely sure that you don't want
- to use the generic HID driver for your USB keyboard and prefer
- to use the keyboard in its limited Boot Protocol mode instead.
-
- This is almost certainly not what you want. This is mostly
- useful for embedded applications or simple keyboards.
-
- To compile this driver as a module, choose M here: the
- module will be called usbkbd.
-
- If even remotely unsure, say N.
-
-config USB_MOUSE
- tristate "USB HIDBP Mouse (simple Boot) support"
- depends on USB && INPUT
- ---help---
- Say Y here only if you are absolutely sure that you don't want
- to use the generic HID driver for your USB mouse and prefer
- to use the mouse in its limited Boot Protocol mode instead.
-
- This is almost certainly not what you want. This is mostly
- useful for embedded applications or simple mice.
-
- To compile this driver as a module, choose M here: the
- module will be called usbmouse.
-
- If even remotely unsure, say N.
-
-endmenu
-
config USB_AIPTEK
tristate "Aiptek 6000U/8000U tablet support"
depends on USB && INPUT
# Multipart objects.
wacom-objs := wacom_wac.o wacom_sys.o
-usbhid-objs := hid-core.o
-
-# Optional parts of multipart objects.
-
-ifeq ($(CONFIG_USB_HIDDEV),y)
- usbhid-objs += hiddev.o
-endif
-ifeq ($(CONFIG_HID_PID),y)
- usbhid-objs += hid-pidff.o
-endif
-ifeq ($(CONFIG_LOGITECH_FF),y)
- usbhid-objs += hid-lgff.o
-endif
-ifeq ($(CONFIG_PANTHERLORD_FF),y)
- usbhid-objs += hid-plff.o
-endif
-ifeq ($(CONFIG_THRUSTMASTER_FF),y)
- usbhid-objs += hid-tmff.o
-endif
-ifeq ($(CONFIG_ZEROPLUS_FF),y)
- usbhid-objs += hid-zpff.o
-endif
-ifeq ($(CONFIG_HID_FF),y)
- usbhid-objs += hid-ff.o
-endif
obj-$(CONFIG_USB_AIPTEK) += aiptek.o
obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o
-obj-$(CONFIG_USB_HID) += usbhid.o
-obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_KBTAB) += kbtab.o
obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o
-obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff