<chapter id="blkdev">
<title>Block Devices</title>
-!Edrivers/block/ll_rw_blk.c
+!Eblock/ll_rw_blk.c
</chapter>
<chapter id="miscdev">
4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
-priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and
-as-iosched.c for an example of usage in an i/o scheduler.
+priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
+for an example of usage in an i/o scheduler.
5. Scalability related changes
196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
-216 char USB BlueTooth devices
- 0 = /dev/ttyUB0 First USB BlueTooth device
- 1 = /dev/ttyUB1 Second USB BlueTooth device
+216 char Bluetooth RFCOMM TTY devices
+ 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
+ 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
...
-217 char USB BlueTooth devices (alternate devices)
- 0 = /dev/cuub0 Callout device for ttyUB0
- 1 = /dev/cuub1 Callout device for ttyUB1
+217 char Bluetooth RFCOMM TTY devices (alternate devices)
+ 0 = /dev/curf0 Callout device for rfcomm0
+ 1 = /dev/curf1 Callout device for rfcomm1
...
218 char The Logical Company bus Unibus/Qbus adapters
When: January 2006
Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
Who: Christoph Hellwig <hch@lst.de>
+
+---------------------------
+
+What: START_ARRAY ioctl for md
+When: July 2006
+Files: drivers/md/md.c
+Why: Not reliable by design - can fail when most needed.
+ Alternatives exist
+Who: NeilBrown <neilb@suse.de>
+
+---------------------------
+
+What: au1x00_uart driver
+When: January 2006
+Why: The 8250 serial driver now has the ability to deal with the differences
+ between the standard 8250 family of UARTs and their slightly strange
+ brother on Alchemy SOCs. The loss of features is not considered an
+ issue.
+Who: Ralf Baechle <ralf@linux-mips.org>
has restarted. Messy but it is the only option if you have not
planned for a crash. Alternatively, you can take a picture of
the screen with a digital camera - not nice, but better than
- nothing.
+ nothing. If the messages scroll off the top of the console, you
+ may find that booting with a higher resolution (eg, vga=791)
+ will allow you to read more of the text. (Caveat: This needs vesafb,
+ so won't help for 'early' oopses)
(2) Boot with a serial console (see Documentation/serial-console.txt),
run a null modem to a second machine and capture the output there
+++ /dev/null
-INTRODUCTION
-
- The USB Bluetooth driver supports any USB Bluetooth device.
- It currently works well with the Linux USB Bluetooth stack from Axis
- (available at http://developer.axis.com/software/bluetooth/ ) and
- has been rumored to work with other Linux USB Bluetooth stacks.
-
-
-CONFIGURATION
-
- Currently the driver can handle up to 256 different USB Bluetooth
- devices at once.
-
- If you are not using devfs:
- The major number that the driver uses is 216 so to use the driver,
- create the following nodes:
- mknod /dev/ttyUB0 c 216 0
- mknod /dev/ttyUB1 c 216 1
- mknod /dev/ttyUB2 c 216 2
- mknod /dev/ttyUB3 c 216 3
- .
- .
- .
- mknod /dev/ttyUB254 c 216 254
- mknod /dev/ttyUB255 c 216 255
-
- If you are using devfs:
- The devices supported by this driver will show up as
- /dev/usb/ttub/{0,1,...}
-
- When the device is connected and recognized by the driver, the driver
- will print to the system log, which node the device has been bound to.
-
-
-CONTACT:
-
- If anyone has any problems using this driver, please contact me, or
- join the Linux-USB mailing list (information on joining the mailing
- list, as well as a link to its searchable archive is at
- http://www.linux-usb.org/ )
-
-
-Greg Kroah-Hartman
-greg@kroah.com
menu "Power management options"
-config PM
- bool "Power Management support"
- ---help---
- "Power Management" means that parts of your computer are shut
- off or put into a power conserving "sleep" mode if they are not
- being used. There are two competing standards for doing this: APM
- and ACPI. If you want to use either one, say Y here and then also
- to the requisite support below.
-
- Power Management is most important for battery powered laptop
- computers; if you have a laptop, check out the Linux Laptop home
- page on the WWW at <http://www.linux-on-laptops.com/> or
- Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
- and the Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+source "kernel/power/Kconfig"
config APM
tristate "Advanced Power Management Emulation"
- depends on PM
+ depends on PM_LEGACY
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
*/
#ifdef DEBUG
-#include <asm/arch/debug-macro.S>
-
#if defined(CONFIG_DEBUG_ICEDCC)
.macro loadsp, rb
.endm
- .macro writeb, ch, rb
+ .macro writeb, ch, rb
mcr p14, 0, \ch, c0, c1, 0
.endm
#else
+
+#include <asm/arch/debug-macro.S>
+
.macro writeb, ch, rb
senduart \ch, \rb
.endm
-#if defined(CONFIG_FOOTBRIDGE) || \
- defined(CONFIG_ARCH_RPC) || \
- defined(CONFIG_ARCH_INTEGRATOR) || \
- defined(CONFIG_ARCH_PXA) || \
- defined(CONFIG_ARCH_IXP4XX) || \
- defined(CONFIG_ARCH_IXP2000) || \
- defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
- .macro loadsp, rb
- addruart \rb
- .endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
mov \rb, #0x80000000 @ physical base address
-# if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
-# else
+#else
add \rb, \rb, #0x00010000 @ Ser1
-# endif
+#endif
.endm
#elif defined(CONFIG_ARCH_IOP331)
.macro loadsp, rb
add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
.endm
#else
-#error no serial architecture defined
+ .macro loadsp, rb
+ addruart \rb
+ .endm
#endif
#endif
#endif
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/sa1111.h>
},
};
+void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+ unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+ if (node != 0)
+ sz = 0;
+
+ size[1] = size[0] - sz;
+ size[0] = sz;
+}
+
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
bus_unregister(&sa1111_bus_type);
}
-module_init(sa1111_init);
+subsys_initcall(sa1111_init);
module_exit(sa1111_exit);
MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git8
-# Thu Sep 8 19:24:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 17:41:24 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# S3C2410 Boot
#
# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
#
# S3C2410 Setup
#
# Bus support
#
+CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
#
# Kernel Features
#
-# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_BAST=y
CONFIG_MTD_BAST_MAXSIZE=4
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
CONFIG_PARPORT=y
#
# Plug and Play support
#
+# CONFIG_PNP is not set
#
# Block devices
#
+# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_TUN is not set
#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
# PHY device support
#
# CONFIG_PHYLIB is not set
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-CONFIG_DM9000=m
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# Token Ring devices
#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_S3C2410_RTC=y
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# Graphics support
#
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
#
# Logo configuration
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
#include <linux/string.h>
#include <asm/arch/akita.h>
#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/spitz.h>
#include <asm/leds.h>
#include <asm/io.h>
-#define __io_address(n) __io(IO_ADDRESS(n))
-
extern struct sys_timer realview_timer;
#define AMBA_DEVICE(name,busid,base,plat) \
#include <asm/io.h>
#include <asm/irq.h>
-#include "core.h"
-
#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \
((cpu) * REALVIEW_TWD_SIZE))
#include <asm/cacheflush.h>
#include <asm/hardware/arm_scu.h>
#include <asm/hardware.h>
-
-#include "core.h"
+#include <asm/io.h>
extern void realview_secondary_startup(void);
.name = "pclk",
.divisor = 1,
.min_baud = 0,
- .max_baud = 0.
+ .max_baud = 0,
}
};
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
- .offset = 0
+ .offset = 0,
},
[1] = {
.name = "/boot",
.nr_chips = 1,
.nr_map = smartmedia_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[1] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[3] = {
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
}
};
[0] = {
.start = S3C2410_CS5 + BAST_PA_DM9000,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
*/
static struct dm9000_plat_data bast_dm9k_platdata = {
- .flags = DM9000_PLATF_16BITONLY
+ .flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
.devices = bast_devices,
.devices_count = ARRAY_SIZE(bast_devices),
.clocks = bast_clocks,
- .clocks_count = ARRAY_SIZE(bast_clocks)
+ .clocks_count = ARRAY_SIZE(bast_clocks),
};
static void __init bast_map_io(void)
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/dmtimer.h>
#include <asm/io.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define OCPI_BASE 0xfffec320
#define OCPI_FAULT (OCPI_BASE + 0x00)
* @state: suspend state we're entering.
*
*/
-//#include <asm/arch/hardware.h>
+//#include <asm/hardware.h>
static int omap_pm_prepare(suspend_state_t state)
{
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
.text
#include <asm/hardirq.h>
#include <asm/nmi.h>
#include <asm/hw_irq.h>
+#include <asm/apic.h>
#include <mach_ipi.h>
regs = &fixed_regs;
}
crash_save_this_cpu(regs, cpu);
+ disable_local_APIC();
atomic_dec(&waiting_for_crash_ipi);
/* Assume hlt works */
halt();
}
/* Leave the nmi callback set */
+ disable_local_APIC();
}
#else
static void nmi_shootdown_cpus(void)
/* Make a note of crashing cpu. Will be used in NMI callback.*/
crashing_cpu = smp_processor_id();
nmi_shootdown_cpus();
+ lapic_shutdown();
+#if defined(CONFIG_X86_IO_APIC)
+ disable_IO_APIC();
+#endif
crash_save_self(regs);
}
{
local_irq_enable();
while (!need_resched()) {
- if (can_do_pal_halt) {
- local_irq_disable();
- if (!need_resched())
- safe_halt();
- local_irq_enable();
- } else
+ if (can_do_pal_halt)
+ safe_halt();
+ else
cpu_relax();
}
}
{
void (*mark_idle)(int) = ia64_mark_idle;
int cpu = smp_processor_id();
- set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
+ if (can_do_pal_halt)
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ else
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
if (!need_resched()) {
void (*idle)(void);
#ifdef CONFIG_SMP
#
core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \
arch/mips/jmr3927/common/
+cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000
#
argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:13 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:14:02 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:04:36 2005
#
CONFIG_MIPS=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
# CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_RTC8564=y
CONFIG_SENSORS_MAX6875=y
+# CONFIG_RTC_X1205_I2C is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:20 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:04:39 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:23 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:04:42 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:26 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:04 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# PC-card bridges
#
-# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
#
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:29 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:07 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1100=y
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1100=y
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:32 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:10 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# PC-card bridges
#
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_AU1X00=m
#
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1200=y
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:36 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:15 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_AU1X00=m
#
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
#
# Tulip family network device support
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA MIPS devices
+#
+CONFIG_SND_AU1X00=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
+CONFIG_OBSOLETE_OSS_DRIVER=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
-CONFIG_SOUND_AU1000=y
+# CONFIG_SOUND_AU1000 is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:39 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:18 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_AU1X00=m
#
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
#
# Tulip family network device support
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:42 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:04 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:45 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:08 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:48 2005
+# Linux kernel version: 2.6.14
+# Fri Nov 11 13:29:30 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DECNCR=y
# CONFIG_SCSI_DECSII is not set
# CONFIG_SCSI_SATA is not set
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_DZ=y
-CONFIG_SERIAL_DZ_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DZ is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_PMAG_AA is not set
CONFIG_FB_PMAG_BA=y
CONFIG_FB_PMAGB_B=y
# CONFIG_FB_MAXINE is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:51 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:15 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:54 2005
+# Linux kernel version: 2.6.14
+# Wed Nov 9 11:05:12 2005
#
CONFIG_MIPS=y
# CONFIG_KMOD is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:57 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:22 2005
#
CONFIG_MIPS=y
# CONFIG_KMOD is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:01 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:38:41 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:04 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 23:56:52 2005
#
CONFIG_MIPS=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_PREEMPT_NONE=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLOGIC_1280_1040=y
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_SGI_IOC3_ETH=y
+CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
+CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:32 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_SGI_O2MACE_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:45 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# Open Sound System
#
CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
CONFIG_SOUND_IT8172=y
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_AD1980 is not set
#
# USB support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:12 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:38 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_QTRONIX_KEYBOARD=y
-# CONFIG_IT8172_SCR0 is not set
+CONFIG_IT8172_SCR0=y
+CONFIG_IT8172_SCR1=y
#
# Serial drivers
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:14 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:41 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:44 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:19 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:47 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:22 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:55 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:25 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:05:55 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:28 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:01 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_VRC4173=y
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:30 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:01:36 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:33 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:05 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:35 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:08 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:38 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:11 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_GALILEO_64240_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:41 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:31 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# PC-card bridges
#
-# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
#
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:44 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:14:25 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
#
# Tulip family network device support
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:47 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:15:34 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
#
# Tulip family network device support
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:50 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:25 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:53 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:38 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:56 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:31 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:59 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:45 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# CONFIG_IPW2100 is not set
# CONFIG_IPW_DEBUG is not set
CONFIG_IPW2200=m
-# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:03 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:50 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# USB Device Class drivers
#
-CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:05 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:43 2005
#
CONFIG_MIPS=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
# CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT_NONE=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:45 2005
#
CONFIG_MIPS=y
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=18432
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:10 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:49 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:13 2005
+# Linux kernel version: 2.6.14
+# Wed Nov 9 11:11:47 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:16 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:17:02 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_GPIO_VR41XX is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:18 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 23:06:59 2005
#
CONFIG_MIPS=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT_NONE=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
void lcd44780_puts(const char* s)
{
- int i,j;
+ int j;
int pos = 0;
lcd44780_command(LCD44780_CLEAR);
}
}
#ifdef LCD44780_PUTS_PAUSE
- for(i = 1; i < 2000; i++)
- lcd44780_wait();
+ {
+ int i;
+
+ for(i = 1; i < 2000; i++)
+ lcd44780_wait();
+ }
#endif
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:13:58 2005
#
CONFIG_MIPS=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
#
# Network testing
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
#
# SCSI low-level drivers
#
+CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
# PHY device support
#
CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
#
# MII PHY device drivers
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
#include <linux/types.h>
#include <linux/time.h>
#include <linux/rtc.h>
+#include <linux/ds1742rtc.h>
#include <asm/time.h>
#include <asm/addrspace.h>
-#include <asm/jmr3927/ds1742rtc.h>
#include <asm/debug.h>
#define EPOCH 2000
jmr3927_io_dipsw());
}
-void __init plat_setup(void)
+void __init tx3927_setup(void)
{
int i;
extern asmlinkage void mipsIRQ(void);
-asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs)
-{
- do_IRQ(SEADINT_UART0, regs);
-}
-
-asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs)
-{
- do_IRQ(SEADINT_UART1, regs);
-}
-
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(0);
+ mips_cpu_irq_init(MIPSCPU_INT_BASE);
/* Now safe to set the exception vector. */
set_except_vector(0, mipsIRQ);
return "MIPS SEAD";
}
-static void __init sead_setup(void)
+void __init plat_setup(void)
{
ioport_resource.end = 0x7fffffff;
#else
s.iobase = SEAD_UART0_REGS_BASE+3;
#endif
- s.irq = SEADINT_UART0;
+ s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
s.iotype = 0;
timer.name = "timer";
timer.dev_id = NULL;
timer.next = NULL;
- timer.mask = 0;
+ timer.mask = CPU_MASK_NONE;
irq_desc[6].action = &timer;
enable_irq(6);
obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o
+obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
- int ret, busno;
+ int ret;
- /* check if the bus is top-level */
- if (bus->parent != NULL)
- busno = bus->number;
-
- ret = mkaddr(busno, devfn, where);
+ ret = mkaddr(bus->number, devfn, where);
if (ret)
return ret;
static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- int ret, busno;
-
- /* check if the bus is top-level */
- if (bus->parent != NULL)
- bus = bus->number;
- else
- bus = 0;
+ int ret;
- ret = mkaddr(busno, devfn, where);
+ ret = mkaddr(bus->number, devfn, where);
if (ret)
return ret;
break;
case 2:
- *(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) =
+ *(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) =
cpu_to_le16(val);
break;
}
struct pci_ops jmr3927_pci_ops = {
- jmr3927_pcibios_read_config,
- jmr3927_pcibios_write_config,
+ jmr3927_pci_read_config,
+ jmr3927_pci_write_config,
};
{
unsigned long val;
- addr = PHYSADDR(addr);
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
- (unsigned long) addr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+ (unsigned long) CPHYSADDR(addr);
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
PCI_IPCIBE_IBE_LONG;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
val =
- le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+ le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
ipcidata);
/* clear by setting */
tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
void tc_writel(unsigned long data, volatile __u32 * addr)
{
- addr = PHYSADDR(addr);
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
cpu_to_le32(data);
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
- (unsigned long) addr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+ (unsigned long) CPHYSADDR(addr);
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
PCI_IPCIBE_IBE_LONG;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
ioaddr = (unsigned long) addr;
offset = ioaddr & 0x3;
- if (offset == 0)
- byte = 0x7;
- else if (offset == 1)
- byte = 0xb;
- else if (offset == 2)
- byte = 0xd;
- else if (offset == 3)
- byte = 0xe;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ byte = 0xf & ~(8 >> offset);
+
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
val =
- le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+ le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
ipcidata);
val = val & 0xff;
/* clear by setting */
data = data | (data << 8) | (data << 16) | (data << 24);
ioaddr = (unsigned long) addr;
offset = ioaddr & 0x3;
- if (offset == 0)
- byte = 0x7;
- else if (offset == 1)
- byte = 0xb;
- else if (offset == 2)
- byte = 0xd;
- else if (offset == 3)
- byte = 0xe;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ byte = 0xf & ~(8 >> offset);
+
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
/* clear by setting */
int byte;
ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x3;
- if (offset == 0)
- byte = 0x3;
- else if (offset == 2)
- byte = 0xc;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ offset = ioaddr & 0x2;
+ byte = 3 << offset;
+
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
val =
- le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+ le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
ipcidata);
val = val & 0xffff;
/* clear by setting */
data = data | (data << 16);
ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x3;
- if (offset == 0)
- byte = 0x3;
- else if (offset == 2)
- byte = 0xc;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ offset = ioaddr & 0x2;
+ byte = 3 << offset;
+
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
/* clear by setting */
__u32 ioaddr;
ioaddr = (unsigned long) addr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
PCI_IPCIBE_IBE_LONG;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
val =
- le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+ le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
ipcidata);
/* clear by setting */
tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
__u32 ioaddr;
ioaddr = (unsigned long) addr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
cpu_to_le32(data);
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
(unsigned long) ioaddr;
- *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+ *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
(PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
PCI_IPCIBE_IBE_LONG;
while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
.pci_ops = &jmr3927_pci_ops,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
- .mem_offset = JMR3927_PCIMEM;
+ .mem_offset = JMR3927_PCIMEM
};
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/ip32/crime.h>
#include <asm/ip32/mace.h>
-struct sgi_crime *crime;
-struct sgi_mace *mace;
+struct sgi_crime __iomem *crime;
+struct sgi_mace __iomem *mace;
+
+EXPORT_SYMBOL_GPL(mace);
void __init crime_init(void)
{
def_bool y
depends on MEMORY_HOTPLUG
-# Some NUMA nodes have memory ranges that span
-# other nodes. Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.
-#
-# This is a relatively temporary hack that should
-# be able to go away when sparsemem is fully in
-# place
-
-config NODES_SPAN_OTHER_NODES
- def_bool y
- depends on NEED_MULTIPLE_NODES
-
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64
HAS_BIARCH := $(call cc-option-yn, -m32)
-ifeq ($(CONFIG_PPC64),y)
-OLDARCH := ppc64
-SZ := 64
-
# Set default 32 bits cross compilers for vdso and boot wrapper
CROSS32_COMPILE ?=
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
+
+ifeq ($(CONFIG_PPC64),y)
+OLDARCH := ppc64
+SZ := 64
+
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
AFLAGS += $(cpu-as-y)
CFLAGS += $(cpu-as-y)
-# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
-
head-y := arch/powerpc/kernel/head_32.o
head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/powerpc/kernel/ \
- arch/$(OLDARCH)/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
+core-$(CONFIG_PPC32) += arch/ppc/kernel/
core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
-defaultimage-$(CONFIG_PPC32) := uImage zImage
+defaultimage-$(CONFIG_PPC32) := zImage
defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
defaultimage-$(CONFIG_PPC_PSERIES) := zImage
KBUILD_IMAGE := $(defaultimage-y)
.PHONY: $(BOOT_TARGETS)
-boot := arch/$(OLDARCH)/boot
+boot := arch/$(ARCH)/boot
-# urk
-ifeq ($(CONFIG_PPC64),y)
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-else
-$(BOOT_TARGETS): vmlinux
- $(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@
-endif
-
-uImage: vmlinux
- $(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@
define archhelp
- @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
- @echo ' uImage - Create a bootable image for U-Boot / PPCBoot'
+ @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
@echo ' install - Install kernel using'
@echo ' (your) ~/bin/installkernel or'
@echo ' (distribution) /sbin/installkernel or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
- @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs'
+ @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
endef
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
- # Temporary hack until we have migrated to asm-powerpc
$(Q)rm -rf arch/$(ARCH)/include
archprepare: checkbin
HOSTCC := gcc
-BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC
+BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
+ $(shell $(CROSS32CC) -print-file-name=include) -fPIC
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds
OBJCOPYFLAGS := contents,alloc,load,readonly,data
cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@
quiet_cmd_stripvm = STRIP $@
- cmd_stripvm = $(STRIP) -s $< -o $@
+ cmd_stripvm = $(STRIP) -s -R .comment $< -o $@
vmlinux.strip: vmlinux
$(call if_changed,stripvm)
.text
.globl _zimage_start
_zimage_start:
- bl reloc_offset
+ bl 1f
-reloc_offset:
+1:
mflr r0
- lis r9,reloc_offset@ha
- addi r9,r9,reloc_offset@l
+ lis r9,1b@ha
+ addi r9,r9,1b@l
subf. r0,r9,r0
- beq clear_caches
+ beq 3f
-reloc_got2:
lis r9,__got2_start@ha
addi r9,r9,__got2_start@l
lis r8,__got2_end@ha
addi r8,r8,__got2_end@l
subf. r8,r9,r8
- beq clear_caches
+ beq 3f
srwi. r8,r8,2
mtctr r8
add r9,r0,r9
-reloc_got2_loop:
+2:
lwz r8,0(r9)
add r8,r8,r0
stw r8,0(r9)
addi r9,r9,4
- bdnz reloc_got2_loop
+ bdnz 2b
-clear_caches:
+3:
lis r9,_start@h
add r9,r0,r9
lis r8,_etext@ha
addi r8,r8,_etext@l
add r8,r0,r8
-1: dcbf r0,r9
+4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmplwi 0,r9,8
- blt 1b
+ blt 4b
sync
isync
static struct addr_range vmlinuz;
static struct addr_range initrd;
+static unsigned long elfoffset;
+
static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */
static char elfheader[256];
return addr;
}
+static int is_elf64(void *hdr)
+{
+ Elf64_Ehdr *elf64 = hdr;
+ Elf64_Phdr *elf64ph;
+ unsigned int i;
+
+ if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 &&
+ elf64->e_ident[EI_MAG1] == ELFMAG1 &&
+ elf64->e_ident[EI_MAG2] == ELFMAG2 &&
+ elf64->e_ident[EI_MAG3] == ELFMAG3 &&
+ elf64->e_ident[EI_CLASS] == ELFCLASS64 &&
+ elf64->e_ident[EI_DATA] == ELFDATA2MSB &&
+ elf64->e_type == ET_EXEC &&
+ elf64->e_machine == EM_PPC64))
+ return 0;
+
+ elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
+ (unsigned long)elf64->e_phoff);
+ for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++)
+ if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
+ break;
+ if (i >= (unsigned int)elf64->e_phnum)
+ return 0;
+
+ elfoffset = (unsigned long)elf64ph->p_offset;
+ vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset;
+ vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset;
+ return 1;
+}
+
+static int is_elf32(void *hdr)
+{
+ Elf32_Ehdr *elf32 = hdr;
+ Elf32_Phdr *elf32ph;
+ unsigned int i;
+
+ if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 &&
+ elf32->e_ident[EI_MAG1] == ELFMAG1 &&
+ elf32->e_ident[EI_MAG2] == ELFMAG2 &&
+ elf32->e_ident[EI_MAG3] == ELFMAG3 &&
+ elf32->e_ident[EI_CLASS] == ELFCLASS32 &&
+ elf32->e_ident[EI_DATA] == ELFDATA2MSB &&
+ elf32->e_type == ET_EXEC &&
+ elf32->e_machine == EM_PPC))
+ return 0;
+
+ elf32 = (Elf32_Ehdr *)elfheader;
+ elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff);
+ for (i = 0; i < elf32->e_phnum; i++, elf32ph++)
+ if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0)
+ break;
+ if (i >= elf32->e_phnum)
+ return 0;
+
+ elfoffset = elf32ph->p_offset;
+ vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset;
+ vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset;
+ return 1;
+}
+
void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
{
- unsigned long i;
int len;
kernel_entry_t kernel_entry;
- Elf64_Ehdr *elf64;
- Elf64_Phdr *elf64ph;
memset(__bss_start, 0, _end - __bss_start);
printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp);
+ vmlinuz.addr = (unsigned long)_vmlinux_start;
+ vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
+
+ /* gunzip the ELF header of the kernel */
+ if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
+ len = vmlinuz.size;
+ gunzip(elfheader, sizeof(elfheader),
+ (unsigned char *)vmlinuz.addr, &len);
+ } else
+ memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader));
+
+ if (!is_elf64(elfheader) && !is_elf32(elfheader)) {
+ printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+ exit();
+ }
+
/*
* The first available claim_base must be above the end of the
* the loaded kernel wrapper file (_start to _end includes the
claim_base = PROG_START;
#endif
- vmlinuz.addr = (unsigned long)_vmlinux_start;
- vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
-
- /* gunzip the ELF header of the kernel */
- if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
- len = vmlinuz.size;
- gunzip(elfheader, sizeof(elfheader),
- (unsigned char *)vmlinuz.addr, &len);
- } else
- memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader));
-
- elf64 = (Elf64_Ehdr *)elfheader;
- if ( elf64->e_ident[EI_MAG0] != ELFMAG0 ||
- elf64->e_ident[EI_MAG1] != ELFMAG1 ||
- elf64->e_ident[EI_MAG2] != ELFMAG2 ||
- elf64->e_ident[EI_MAG3] != ELFMAG3 ||
- elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
- elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
- elf64->e_type != ET_EXEC ||
- elf64->e_machine != EM_PPC64 )
- {
- printf("Error: not a valid PPC64 ELF file!\n\r");
- exit();
- }
-
- elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
- (unsigned long)elf64->e_phoff);
- for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) {
- if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
- break;
- }
- vmlinux.size = (unsigned long)elf64ph->p_filesz +
- (unsigned long)elf64ph->p_offset;
/* We need to claim the memsize plus the file offset since gzip
* will expand the header (file offset), then the kernel, then
* possible rubbish we don't care about. But the kernel bss must
* be claimed (it will be zero'd by the kernel itself)
*/
- vmlinux.memsize = (unsigned long)elf64ph->p_memsz +
- (unsigned long)elf64ph->p_offset;
printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize);
vmlinux.addr = try_claim(vmlinux.memsize);
if (vmlinux.addr == 0) {
/* Skip over the ELF header */
#ifdef DEBUG
printf("... skipping 0x%lx bytes of ELF header\n\r",
- (unsigned long)elf64ph->p_offset);
+ elfoffset);
#endif
- vmlinux.addr += (unsigned long)elf64ph->p_offset;
+ vmlinux.addr += elfoffset;
flush_cache((void *)vmlinux.addr, vmlinux.size);
(unsigned long)prom, NULL);
#endif
- kernel_entry( a1, a2, prom, NULL );
+ kernel_entry(a1, a2, prom, NULL);
printf("Error: Linux kernel returned to zImage bootloader!\n\r");
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:36:20 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
#
# Code maturity level options
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_CELL=y
CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=y
+CONFIG_MMIO_NVRAM=y
+CONFIG_CELL_IIC=y
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# Macintosh device drivers
#
+# CONFIG_WINDFARM is not set
#
# Network device support
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
# CONFIG_MV643XX_ETH is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
+# CONFIG_WATCHDOG_RTAS is not set
#
# PCI-based Watchdog Cards
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_NLS_UTF8 is not set
#
-# Profiling support
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
#
# Security options
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 13:37:59 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:39:20 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
-# CONFIG_FEC_8XX is not set
#
# Ethernet (1000 Mbit)
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_TEXTSEARCH_FSM=m
#
-# Profiling support
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_VM is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:09 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
#
# Code maturity level options
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-CONFIG_PPC_ISERIES=y
# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_ISERIES=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_PM is not set
CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
#
# Macintosh device drivers
#
+# CONFIG_WINDFARM is not set
#
# Network device support
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_VIOPATH=y
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
#
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:58 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+CONFIG_POWER4_ONLY=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
#
# Code maturity level options
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
CONFIG_U3_DART=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# Macintosh device drivers
#
+# CONFIG_WINDFARM is not set
#
# Network device support
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_NLS_UTF8=y
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+
+#
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
# CONFIG_IRQSTACKS is not set
+CONFIG_BOOTX_TEXT=y
#
# Security options
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:28:33 2005
+# Linux kernel version: 2.6.15-rc1
+# Fri Nov 18 16:23:24 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
#
# Code maturity level options
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
-CONFIG_PPC_BPA=y
CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
CONFIG_U3_DART=y
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-# CONFIG_POWER4_ONLY is not set
+CONFIG_IBMVIO=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_NUMA is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HOTPLUG_CPU=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Parallel port support
#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT is not set
#
# Plug and Play support
# Block devices
#
CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
#
# Network device support
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
# CONFIG_MV643XX_ETH is not set
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
CONFIG_HVC_CONSOLE=y
CONFIG_HVCS=m
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
CONFIG_NLS_UTF8=m
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
#
# Security options
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc1
-# Mon Nov 14 15:27:00 2005
+# Tue Nov 15 14:36:55 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
-# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SCANLOG=m
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
- irq.o signal_32.o pmc.o vdso.o
+ irq.o align.o signal_32.o pmc.o vdso.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
- firmware.o sysfs.o udbg.o
+ firmware.o sysfs.o udbg.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
udbgscc-$(CONFIG_PPC64) := udbg_scc.o
obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
ifeq ($(CONFIG_PPC_MERGE),y)
endif
+obj-$(CONFIG_PPC64) += $(obj64-y)
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_PPC64) += entry_64.o
* PowerPC 403GCX/405GP modifications.
* Copyright (c) 2001-2002 PPC64 team, IBM Corp
* 64-bit and Power4 support
+ * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ * Merge ppc32 and ppc64 implementations
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
-#define SW 0x40 /* byte swap */
+#define SW 0x40 /* byte swap int or ... */
+#define S 0x40 /* ... single-precision fp */
+#define SX 0x40 /* byte count in XER */
+#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
+#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
+
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F }, /* 00 0 1000: lfs */
+ { 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F }, /* 00 0 1010: stfs */
+ { 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
- { 8, LD }, /* 00 0 1101: ld */
+ { 8, LD }, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
- { 8, ST }, /* 00 0 1111: std */
+ { 8, ST }, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+U }, /* 00 1 1000: lfsu */
+ { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+U }, /* 00 1 1010: stfsu */
+ { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
{ 4, LD+SE }, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
- { 0, LD }, /* 01 0 1000: lswx */
- { 0, LD }, /* 01 0 1001: lswi */
- { 0, ST }, /* 01 0 1010: stswx */
- { 0, ST }, /* 01 0 1011: stswi */
+ { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
+ { 4, LD+M+HARD }, /* 01 0 1001: lswi */
+ { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
+ { 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
{ 8, LD+U }, /* 01 0 1101: ldu */
INVALID, /* 01 0 1110 */
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
- { 0, ST }, /* 10 0 0010: stwcx. */
+ INVALID, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
- { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
+ { 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
- { 4, LD+F }, /* 11 0 1000: lfsx */
+ { 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F }, /* 11 0 1010: stfsx */
+ { 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
{ 8, LD+M }, /* 11 0 1101: lmd */
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
- { 4, LD+F+U }, /* 11 1 1000: lfsux */
+ { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+U }, /* 11 1 1010: stfsux */
+ { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
INVALID, /* 11 1 1111 */
};
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
+/*
+ * Create a DSISR value from the instruction
+ */
static inline unsigned make_dsisr(unsigned instr)
{
unsigned dsisr;
-
- /* create a DSISR value from the instruction */
- dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */
-
- if ( IS_XFORM(instr) ) {
- dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */
- dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */
- dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */
+
+
+ /* bits 6:15 --> 22:31 */
+ dsisr = (instr & 0x03ff0000) >> 16;
+
+ if (IS_XFORM(instr)) {
+ /* bits 29:30 --> 15:16 */
+ dsisr |= (instr & 0x00000006) << 14;
+ /* bit 25 --> 17 */
+ dsisr |= (instr & 0x00000040) << 8;
+ /* bits 21:24 --> 18:21 */
+ dsisr |= (instr & 0x00000780) << 3;
+ } else {
+ /* bit 5 --> 17 */
+ dsisr |= (instr & 0x04000000) >> 12;
+ /* bits 1: 4 --> 18:21 */
+ dsisr |= (instr & 0x78000000) >> 17;
+ /* bits 30:31 --> 12:13 */
+ if (IS_DSFORM(instr))
+ dsisr |= (instr & 0x00000003) << 18;
}
- else {
- dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */
- dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */
- if ( IS_DSFORM(instr) ) {
- dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */
+
+ return dsisr;
+}
+
+/*
+ * The dcbz (data cache block zero) instruction
+ * gives an alignment fault if used on non-cacheable
+ * memory. We handle the fault mainly for the
+ * case when we are running with the cache disabled
+ * for debugging.
+ */
+static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
+{
+ long __user *p;
+ int i, size;
+
+#ifdef __powerpc64__
+ size = ppc64_caches.dline_size;
+#else
+ size = L1_CACHE_BYTES;
+#endif
+ p = (long __user *) (regs->dar & -size);
+ if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
+ return -EFAULT;
+ for (i = 0; i < size / sizeof(long); ++i)
+ if (__put_user(0, p+i))
+ return -EFAULT;
+ return 1;
+}
+
+/*
+ * Emulate load & store multiple instructions
+ * On 64-bit machines, these instructions only affect/use the
+ * bottom 4 bytes of each register, and the loads clear the
+ * top 4 bytes of the affected register.
+ */
+#ifdef CONFIG_PPC64
+#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
+#else
+#define REG_BYTE(rp, i) *((u8 *)(rp) + (i))
+#endif
+
+static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
+ unsigned int reg, unsigned int nb,
+ unsigned int flags, unsigned int instr)
+{
+ unsigned long *rptr;
+ unsigned int nb0, i;
+
+ /*
+ * We do not try to emulate 8 bytes multiple as they aren't really
+ * available in our operating environments and we don't try to
+ * emulate multiples operations in kernel land as they should never
+ * be used/generated there at least not on unaligned boundaries
+ */
+ if (unlikely((nb > 4) || !user_mode(regs)))
+ return 0;
+
+ /* lmw, stmw, lswi/x, stswi/x */
+ nb0 = 0;
+ if (flags & HARD) {
+ if (flags & SX) {
+ nb = regs->xer & 127;
+ if (nb == 0)
+ return 1;
+ } else {
+ if (__get_user(instr,
+ (unsigned int __user *)regs->nip))
+ return -EFAULT;
+ nb = (instr >> 11) & 0x1f;
+ if (nb == 0)
+ nb = 32;
}
+ if (nb + reg * 4 > 128) {
+ nb0 = nb + reg * 4 - 128;
+ nb = 128 - reg * 4;
+ }
+ } else {
+ /* lwm, stmw */
+ nb = (32 - reg) * 4;
}
-
- return dsisr;
+
+ if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
+ return -EFAULT; /* bad address */
+
+ rptr = ®s->gpr[reg];
+ if (flags & LD) {
+ /*
+ * This zeroes the top 4 bytes of the affected registers
+ * in 64-bit mode, and also zeroes out any remaining
+ * bytes of the last register for lsw*.
+ */
+ memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
+ if (nb0 > 0)
+ memset(®s->gpr[0], 0,
+ ((nb0 + 3) / 4) * sizeof(unsigned long));
+
+ for (i = 0; i < nb; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = ®s->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+
+ } else {
+ for (i = 0; i < nb; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = ®s->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+ }
+ return 1;
}
-int
-fix_alignment(struct pt_regs *regs)
+
+/*
+ * Called on alignment exception. Attempts to fixup
+ *
+ * Return 1 on success
+ * Return 0 if unable to handle the interrupt
+ * Return -EFAULT if data address is bad
+ */
+
+int fix_alignment(struct pt_regs *regs)
{
unsigned int instr, nb, flags;
- int t;
- unsigned long reg, areg;
- unsigned long i;
- int ret;
- unsigned dsisr;
+ unsigned int reg, areg;
+ unsigned int dsisr;
unsigned char __user *addr;
unsigned char __user *p;
- unsigned long __user *lp;
+ int ret, t;
union {
- long ll;
+ u64 ll;
double dd;
unsigned char v[8];
struct {
} data;
/*
- * Return 1 on success
- * Return 0 if unable to handle the interrupt
- * Return -EFAULT if data address is bad
+ * We require a complete register set, if not, then our assembly
+ * is broken
*/
+ CHECK_FULL_REGS(regs);
dsisr = regs->dsisr;
+ /* Some processors don't provide us with a DSISR we can use here,
+ * let's make one up from the instruction
+ */
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
- unsigned int real_instr;
- if (__get_user(real_instr, (unsigned int __user *)regs->nip))
- return 0;
- dsisr = make_dsisr(real_instr);
+ unsigned int real_instr;
+ if (unlikely(__get_user(real_instr,
+ (unsigned int __user *)regs->nip)))
+ return -EFAULT;
+ dsisr = make_dsisr(real_instr);
}
/* extract the operation and registers from the dsisr */
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
- /* A size of 0 indicates an instruction we don't support */
- /* we also don't support the multiples (lmw, stmw, lmd, stmd) */
- if ((nb == 0) || (flags & M))
- return 0; /* too hard or invalid instruction */
-
- /*
- * Special handling for dcbz
- * dcbz may give an alignment exception for accesses to caching inhibited
- * storage
+ /* A size of 0 indicates an instruction we don't support, with
+ * the exception of DCBZ which is handled as a special case here
*/
if (instr == DCBZ)
- addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
+ return emulate_dcbz(regs, addr);
+ if (unlikely(nb == 0))
+ return 0;
+
+ /* Load/Store Multiple instructions are handled in their own
+ * function
+ */
+ if (flags & M)
+ return emulate_multiple(regs, addr, reg, nb, flags, instr);
/* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
+ if (unlikely(user_mode(regs) &&
+ !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
+ addr, nb)))
+ return -EFAULT;
/* Force the fprs into the save area so we can reference them */
if (flags & F) {
- if (!user_mode(regs))
+ /* userland only */
+ if (unlikely(!user_mode(regs)))
return 0;
flush_fp_to_thread(current);
}
-
- /* If we are loading, get the data from user space */
+
+ /* If we are loading, get the data from user space, else
+ * get it from register values
+ */
if (flags & LD) {
data.ll = 0;
ret = 0;
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
}
- }
-
- /* If we are storing, get the data from the saved gpr or fpr */
- if (flags & ST) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing stfs, have to convert to single */
- preempt_disable();
- enable_kernel_fp();
- cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- data.dd = current->thread.fpr[reg];
- }
- else
- data.ll = regs->gpr[reg];
- }
-
- /* Swap bytes as needed */
- if (flags & SW) {
- if (nb == 2)
- SWAP(data.v[6], data.v[7]);
- else { /* nb must be 4 */
- SWAP(data.v[4], data.v[7]);
- SWAP(data.v[5], data.v[6]);
- }
- }
-
- /* Sign extend as needed */
- if (flags & SE) {
+ } else if (flags & F)
+ data.dd = current->thread.fpr[reg];
+ else
+ data.ll = regs->gpr[reg];
+
+ /* Perform other misc operations like sign extension, byteswap,
+ * or floating point single precision conversion
+ */
+ switch (flags & ~U) {
+ case LD+SE: /* sign extend */
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
- }
-
- /* If we are loading, move the data to the gpr or fpr */
- if (flags & LD) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing lfs, have to convert to double */
- preempt_disable();
- enable_kernel_fp();
- cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- current->thread.fpr[reg] = data.dd;
+ break;
+ case LD+S: /* byte-swap */
+ case ST+S:
+ if (nb == 2) {
+ SWAP(data.v[6], data.v[7]);
+ } else {
+ SWAP(data.v[4], data.v[7]);
+ SWAP(data.v[5], data.v[6]);
}
- else
- regs->gpr[reg] = data.ll;
+ break;
+
+ /* Single-precision FP load and store require conversions... */
+ case LD+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
+ case ST+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
}
-
- /* If we are storing, copy the data to the user */
+
+ /* Store result to memory or update registers */
if (flags & ST) {
ret = 0;
p = addr;
switch (nb) {
- case 128: /* Special case - must be dcbz */
- lp = (unsigned long __user *)p;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- ret |= __put_user(0, lp++);
- break;
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
}
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
- }
-
+ } else if (flags & F)
+ current->thread.fpr[reg] = data.dd;
+ else
+ regs->gpr[reg] = data.ll;
+
/* Update RA as needed */
- if (flags & U) {
+ if (flags & U)
regs->gpr[areg] = regs->dar;
- }
return 1;
}
-
.text
- .align 5
-_GLOBAL(__delay)
- cmpwi 0,r3,0
- mtctr r3
- beqlr
-1: bdnz 1b
- blr
-
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/machdep.h>
-#include <asm/udbg.h>
#include <asm/ppc-pci.h>
#ifdef DEBUG
+#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
/*
* pci_controller(phb) initialized common variables.
*/
-void __devinit pci_setup_pci_controller(struct pci_controller *hose)
+static void __devinit pci_setup_pci_controller(struct pci_controller *hose)
{
memset(hose, 0, sizeof(struct pci_controller));
spin_unlock(&hose_spinlock);
}
+static void add_linux_pci_domain(struct device_node *dev,
+ struct pci_controller *phb)
+{
+ struct property *of_prop;
+ unsigned int size;
+
+ of_prop = (struct property *)
+ get_property(dev, "linux,pci-domain", &size);
+ if (of_prop != NULL)
+ return;
+ WARN_ON(of_prop && size < sizeof(int));
+ if (of_prop && size < sizeof(int))
+ of_prop = NULL;
+ size = sizeof(struct property) + sizeof(int);
+ if (of_prop == NULL) {
+ if (mem_init_done)
+ of_prop = kmalloc(size, GFP_KERNEL);
+ else
+ of_prop = alloc_bootmem(size);
+ }
+ memset(of_prop, 0, sizeof(struct property));
+ of_prop->name = "linux,pci-domain";
+ of_prop->length = sizeof(int);
+ of_prop->value = (unsigned char *)&of_prop[1];
+ *((int *)of_prop->value) = phb->global_number;
+ prom_add_property(dev, of_prop);
+}
+
+struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
+{
+ struct pci_controller *phb;
+
+ if (mem_init_done)
+ phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+ else
+ phb = alloc_bootmem(sizeof (struct pci_controller));
+ if (phb == NULL)
+ return NULL;
+ pci_setup_pci_controller(phb);
+ phb->arch_data = dev;
+ phb->is_dynamic = mem_init_done;
+ if (dev)
+ add_linux_pci_domain(dev, phb);
+ return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+ if (phb->arch_data) {
+ struct device_node *np = phb->arch_data;
+ int *domain = (int *)get_property(np,
+ "linux,pci-domain", NULL);
+ if (domain)
+ *domain = -1;
+ }
+ if (phb->is_dynamic)
+ kfree(phb);
+}
+
static void __init pcibios_claim_one_bus(struct pci_bus *b)
{
struct pci_dev *dev;
* (size depending on dev->n_addr_cells)
* cells 4+5 or 5+6: the size of the range
*/
- rlen = 0;
- hose->io_base_phys = 0;
ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+ if (ranges == NULL)
+ return;
+ hose->io_base_phys = 0;
while ((rlen -= np * sizeof(unsigned int)) >= 0) {
res = NULL;
pci_space = ranges[0];
if (get_bus_io_range(bus, &start_phys, &start_virt, &size))
return 1;
+ if (start_phys == 0)
+ return 1;
printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
if (__ioremap_explicit(start_phys, start_virt, size,
_PAGE_NO_CACHE | _PAGE_GUARDED))
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
+#ifndef __powerpc64__
+EXPORT_SYMBOL(__ide_mm_insl);
+EXPORT_SYMBOL(__ide_mm_outsw);
+EXPORT_SYMBOL(__ide_mm_insw);
+EXPORT_SYMBOL(__ide_mm_outsl);
+#endif
+
EXPORT_SYMBOL(_insb);
EXPORT_SYMBOL(_outsb);
EXPORT_SYMBOL(_insw);
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
int rtas_set_rtc_time(struct rtc_time *tm)
{
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
struct pci_controller *phb,
unsigned int addr_size_words)
{
- pci_setup_pci_controller(phb);
-
if (is_python(dev))
python_countermeasures(dev, addr_size_words);
if (phb_set_bus_ranges(dev, phb))
return 1;
- phb->arch_data = dev;
phb->ops = &rtas_pci_ops;
phb->buid = get_phb_buid(dev);
return 0;
}
-static void __devinit add_linux_pci_domain(struct device_node *dev,
- struct pci_controller *phb,
- struct property *of_prop)
-{
- memset(of_prop, 0, sizeof(struct property));
- of_prop->name = "linux,pci-domain";
- of_prop->length = sizeof(phb->global_number);
- of_prop->value = (unsigned char *)&of_prop[1];
- memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number));
- prom_add_property(dev, of_prop);
-}
-
-static struct pci_controller * __init alloc_phb(struct device_node *dev,
- unsigned int addr_size_words)
-{
- struct pci_controller *phb;
- struct property *of_prop;
-
- phb = alloc_bootmem(sizeof(struct pci_controller));
- if (phb == NULL)
- return NULL;
-
- of_prop = alloc_bootmem(sizeof(struct property) +
- sizeof(phb->global_number));
- if (!of_prop)
- return NULL;
-
- if (setup_phb(dev, phb, addr_size_words))
- return NULL;
-
- add_linux_pci_domain(dev, phb, of_prop);
-
- return phb;
-}
-
-static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words)
-{
- struct pci_controller *phb;
-
- phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller),
- GFP_KERNEL);
- if (phb == NULL)
- return NULL;
-
- if (setup_phb(dev, phb, addr_size_words))
- return NULL;
-
- phb->is_dynamic = 1;
-
- /* TODO: linux,pci-domain? */
-
- return phb;
-}
-
unsigned long __init find_and_init_phbs(void)
{
struct device_node *node;
if (node->type == NULL || strcmp(node->type, "pci") != 0)
continue;
- phb = alloc_phb(node, root_size_cells);
+ phb = pcibios_alloc_controller(node);
if (!phb)
continue;
-
+ setup_phb(node, phb, root_size_cells);
pci_process_bridge_OF_ranges(phb, node, 0);
pci_setup_phb_io(phb, index == 0);
#ifdef CONFIG_PPC_PSERIES
root_size_cells = prom_n_size_cells(root);
primary = list_empty(&hose_list);
- phb = alloc_phb_dynamic(dn, root_size_cells);
+ phb = pcibios_alloc_controller(dn);
if (!phb)
return NULL;
-
+ setup_phb(dn, phb, root_size_cells);
pci_process_bridge_OF_ranges(phb, dn, primary);
pci_setup_phb_io_dynamic(phb, primary);
}
list_del(&phb->list_node);
- if (phb->is_dynamic)
- kfree(phb);
+ pcibios_free_controller(phb);
return 0;
}
#undef DEBUG
#ifdef DEBUG
+#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#include <asm/paca.h>
#endif
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-
#ifdef DEBUG
+#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
+
cpumask_t cpu_possible_map = CPU_MASK_NONE;
cpumask_t cpu_online_map = CPU_MASK_NONE;
cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
*/
DEFINE_PER_CPU(unsigned long, last_jiffy);
+void __delay(unsigned long loops)
+{
+ unsigned long start;
+ int diff;
+
+ if (__USE_RTC()) {
+ start = get_rtcl();
+ do {
+ /* the RTCL register wraps at 1000000000 */
+ diff = get_rtcl() - start;
+ if (diff < 0)
+ diff += 1000000000;
+ } while (diff < loops);
+ } else {
+ start = get_tbl();
+ while (get_tbl() - start < loops)
+ HMT_low();
+ HMT_medium();
+ }
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+ __delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
+
static __inline__ void timer_check_rtc(void)
{
/*
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
srwi. r8,r8,7 /* compute line count */
+ crclr cr0*4+so
beqlr /* nothing to do? */
mtctr r8
mr r3,r6
*/
V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
.cfi_startproc
+ crclr cr0*4+so
sync
isync
li r3,0
.cfi_startproc
mflr r12
.cfi_register lr,r12
-
mr r4,r3
bl __get_datapage@local
mtlr r12
beqlr
li r0,__NR_syscalls
stw r0,0(r4)
+ crclr cr0*4+so
blr
.cfi_endproc
V_FUNCTION_END(__kernel_get_syscall_map)
lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3)
lwz r3,CFG_TB_TICKS_PER_SEC(r3)
mtlr r12
+ crclr cr0*4+so
blr
.cfi_endproc
V_FUNCTION_END(__kernel_get_tbfreq)
stw r5,TZONE_TZ_DSTTIME(r11)
1: mtlr r12
+ crclr cr0*4+so
li r3,0
blr
mulli r5,r5,1000
stw r5,TSPC32_TV_NSEC(r11)
mtlr r12
+ crclr cr0*4+so
li r3,0
blr
stw r4,TSPC32_TV_NSEC(r11)
mtlr r12
+ crclr cr0*4+so
li r3,0
blr
li r3,0
cmpli cr0,r4,0
+ crclr cr0*4+so
beqlr
lis r5,CLOCK_REALTIME_RES@h
ori r5,r5,CLOCK_REALTIME_RES@l
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
srwi. r8,r8,7 /* compute line count */
+ crclr cr0*4+so
beqlr /* nothing to do? */
mtctr r8
mr r3,r6
*/
V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
.cfi_startproc
+ crclr cr0*4+so
sync
isync
li r3,0
.cfi_startproc
mflr r12
.cfi_register lr,r12
-
mr r4,r3
bl V_LOCAL_FUNC(__get_datapage)
mtlr r12
addi r3,r3,CFG_SYSCALL_MAP64
cmpli cr0,r4,0
+ crclr cr0*4+so
beqlr
li r0,__NR_syscalls
stw r0,0(r4)
bl V_LOCAL_FUNC(__get_datapage)
ld r3,CFG_TB_TICKS_PER_SEC(r3)
mtlr r12
+ crclr cr0*4+so
blr
.cfi_endproc
V_FUNCTION_END(__kernel_get_tbfreq)
stw r4,TZONE_TZ_MINWEST(r10)
stw r5,TZONE_TZ_DSTTIME(r10)
1: mtlr r12
+ crclr cr0*4+so
li r3,0 /* always success */
blr
.cfi_endproc
std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */
mtlr r12
+ crclr cr0*4+so
li r3,0
blr
std r7,TSPC64_TV_NSEC(r11)
mtlr r12
+ crclr cr0*4+so
li r3,0
blr
li r3,0
cmpli cr0,r4,0
+ crclr cr0*4+so
beqlr
lis r5,CLOCK_REALTIME_RES@h
ori r5,r5,CLOCK_REALTIME_RES@l
#include "mmu_decl.h" /* for __max_low_memory */
#endif
-struct lmb lmb;
-
#undef DEBUG
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+struct lmb lmb;
+
void lmb_dump_all(void)
{
#ifdef DEBUG
unsigned long i;
- udbg_printf("lmb_dump_all:\n");
- udbg_printf(" memory.cnt = 0x%lx\n",
- lmb.memory.cnt);
- udbg_printf(" memory.size = 0x%lx\n",
- lmb.memory.size);
+ DBG("lmb_dump_all:\n");
+ DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
+ DBG(" memory.size = 0x%lx\n", lmb.memory.size);
for (i=0; i < lmb.memory.cnt ;i++) {
- udbg_printf(" memory.region[0x%x].base = 0x%lx\n",
+ DBG(" memory.region[0x%x].base = 0x%lx\n",
i, lmb.memory.region[i].base);
- udbg_printf(" .size = 0x%lx\n",
+ DBG(" .size = 0x%lx\n",
lmb.memory.region[i].size);
}
- udbg_printf("\n reserved.cnt = 0x%lx\n",
- lmb.reserved.cnt);
- udbg_printf(" reserved.size = 0x%lx\n",
- lmb.reserved.size);
+ DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
+ DBG(" reserved.size = 0x%lx\n", lmb.reserved.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
- udbg_printf(" reserved.region[0x%x].base = 0x%lx\n",
+ DBG(" reserved.region[0x%x].base = 0x%lx\n",
i, lmb.reserved.region[i].base);
- udbg_printf(" .size = 0x%lx\n",
+ DBG(" .size = 0x%lx\n",
lmb.reserved.region[i].size);
}
#endif /* DEBUG */
unsigned long flags;
pgdat_resize_lock(pgdat, &flags);
for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ if (!pfn_valid(pgdat->node_start_pfn + i))
+ continue;
page = pgdat_page_nr(pgdat, i);
total++;
if (PageHighMem(page))
struct page *page;
unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
- num_physpages = max_pfn; /* RAM is assumed contiguous */
+ num_physpages = lmb.memory.size >> PAGE_SHIFT;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
#ifdef CONFIG_NEED_MULTIPLE_NODES
}
}
#else
- max_mapnr = num_physpages;
+ max_mapnr = max_pfn;
totalram_pages += free_all_bootmem();
#endif
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ if (!pfn_valid(pgdat->node_start_pfn + i))
+ continue;
page = pgdat_page_nr(pgdat, i);
if (PageReserved(page))
reservedpages++;
{
unsigned long top_of_ram = lmb_end_of_DRAM();
unsigned long total_ram = lmb_phys_mem_size();
+ unsigned int i;
printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
(top_of_ram - total_ram) >> 20);
map_cpu_to_node(boot_cpuid, 0);
- add_region(0, 0, lmb_end_of_DRAM() >> PAGE_SHIFT);
+ for (i = 0; i < lmb.memory.cnt; ++i)
+ add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT,
+ lmb_size_pages(&lmb.memory, i));
node_set_online(0);
}
if (rtas_token("display-character") >= 0)
ppc_md.progress = rtas_progress;
+ /* use RTAS time-of-day routines if available */
+ if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+ ppc_md.get_boot_time = rtas_get_boot_time;
+ ppc_md.get_rtc_time = rtas_get_rtc_time;
+ ppc_md.set_rtc_time = rtas_set_rtc_time;
+ }
+
#ifdef CONFIG_BOOTX_TEXT
if (ppc_md.progress == NULL && boot_text_mapped)
ppc_md.progress = btext_progress;
ppc_md.halt = rtas_halt;
ppc_md.time_init = chrp_time_init;
+ ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+ /* this may get overridden with rtas routines later... */
ppc_md.set_rtc_time = chrp_set_rtc_time;
ppc_md.get_rtc_time = chrp_get_rtc_time;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
#ifdef CONFIG_SMP
smp_ops = &chrp_smp_ops;
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/mpic.h>
+#include <asm/rtas.h>
static void __devinit smp_chrp_kick_cpu(int nr)
{
chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
- tm.tm_year -= 1900;
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(tm.tm_sec);
BIN_TO_BCD(tm.tm_min);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
- if ((year += 1900) < 1970)
+ if (year < 70)
year += 100;
tm->tm_sec = sec;
tm->tm_min = min;
if (ret == 0) {
printk("bus %d appears to exist\n", bus);
- phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+ phb = pcibios_alloc_controller(NULL);
if (phb == NULL)
return -ENOMEM;
- pci_setup_pci_controller(phb);
phb->pci_mem_offset = phb->local_number = bus;
phb->first_busno = bus;
dev->full_name);
}
- hose = alloc_bootmem(sizeof(struct pci_controller));
+ hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
- pci_setup_pci_controller(hose);
-
- hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
- of_prop = alloc_bootmem(sizeof(struct property) +
- sizeof(hose->global_number));
- if (of_prop) {
- memset(of_prop, 0, sizeof(struct property));
- of_prop->name = "linux,pci-domain";
- of_prop->length = sizeof(hose->global_number);
- of_prop->value = (unsigned char *)&of_prop[1];
- memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
- prom_add_property(dev, of_prop);
- }
-
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
return 0;
}
+static struct resource rtc_iores = {
+ .name = "rtc",
+ .flags = IORESOURCE_BUSY,
+};
+
unsigned long __init maple_get_boot_time(void)
{
struct rtc_time tm;
printk(KERN_INFO "Maple: No device node for RTC, assuming "
"legacy address (0x%x)\n", maple_rtc_addr);
}
-
+
+ rtc_iores.start = maple_rtc_addr;
+ rtc_iores.end = maple_rtc_addr + 7;
+ request_resource(&ioport_resource, &rtc_iores);
+
maple_get_rtc_time(&tm);
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
+ { "PowerBook5,8", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,9", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
{ "PowerBook6,1", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
- hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
+ hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000,
+ 0x02000000);
/*
- * /ht node doesn't expose a "ranges" property, so we "remove" regions that
- * have been allocated to AGP. So far, this version of the code doesn't assign
- * any of the 0xfxxxxxxx "fine" memory regions to /ht.
- * We need to fix that sooner or later by either parsing all child "ranges"
- * properties or figuring out the U3 address space decoding logic and
- * then read its configuration register (if any).
+ * /ht node doesn't expose a "ranges" property, so we "remove"
+ * regions that have been allocated to AGP. So far, this version of
+ * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions
+ * to /ht. We need to fix that sooner or later by either parsing all
+ * child "ranges" properties or figuring out the U3 address space
+ * decoding logic and then read its configuration register (if any).
*/
hose->io_base_phys = 0xf4000000;
hose->pci_io_size = 0x00400000;
return;
}
- /* We "remove" the AGP resources from the resources allocated to HT, that
- * is we create "holes". However, that code does assumptions that so far
- * happen to be true (cross fingers...), typically that resources in the
- * AGP node are properly ordered
+ /* We "remove" the AGP resources from the resources allocated to HT,
+ * that is we create "holes". However, that code does assumptions
+ * that so far happen to be true (cross fingers...), typically that
+ * resources in the AGP node are properly ordered
*/
cur = 0;
for (i=0; i<3; i++) {
/* We don't care about "fine" resources */
if (res->start >= 0xf0000000)
continue;
- /* Check if it's just a matter of "shrinking" us in one direction */
+ /* Check if it's just a matter of "shrinking" us in one
+ * direction
+ */
if (hose->mem_resources[cur].start == res->start) {
DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
- cur, hose->mem_resources[cur].start, res->end + 1);
+ cur, hose->mem_resources[cur].start,
+ res->end + 1);
hose->mem_resources[cur].start = res->end + 1;
continue;
}
if (hose->mem_resources[cur].end == res->end) {
DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
- cur, hose->mem_resources[cur].end, res->start - 1);
+ cur, hose->mem_resources[cur].end,
+ res->start - 1);
hose->mem_resources[cur].end = res->start - 1;
continue;
}
/* No, it's not the case, we need a hole */
if (cur == 2) {
- /* not enough resources for a hole, we drop part of the range */
- printk(KERN_WARNING "Running out of resources for /ht host !\n");
+ /* not enough resources for a hole, we drop part
+ * of the range
+ */
+ printk(KERN_WARNING "Running out of resources"
+ " for /ht host !\n");
hose->mem_resources[cur].end = res->start - 1;
continue;
}
hose->mem_resources[cur-1].end = res->start - 1;
}
}
-
-/* XXX this needs to be converged between ppc32 and ppc64... */
-static struct pci_controller * __init pcibios_alloc_controller(void)
-{
- struct pci_controller *hose;
-
- hose = alloc_bootmem(sizeof(struct pci_controller));
- if (hose)
- pci_setup_pci_controller(hose);
- return hose;
-}
#endif
/*
#endif
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
- dev->full_name);
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
}
+ /* XXX Different prototypes, to be merged */
+#ifdef CONFIG_PPC64
+ hose = pcibios_alloc_controller(dev);
+#else
hose = pcibios_alloc_controller();
+#endif
if (!hose)
return -ENOMEM;
hose->arch_data = dev;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
-static int eeh_subsystem_enabled;
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_SPINLOCK(confirm_error_lock);
lpaca->lppaca.idle = 1;
if (!need_resched()) {
- start_snooze = __get_tb() +
+ start_snooze = get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
while (!need_resched() && !cpu_is_offline(cpu)) {
HMT_very_low();
if (*smt_snooze_delay != 0 &&
- __get_tb() > start_snooze) {
+ get_tb() > start_snooze) {
HMT_medium();
dedicated_idle_sleep(cpu);
}
#include "plpar_wrappers.h"
#ifdef DEBUG
+#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
extra-y += vmlinux.lds
obj-y := entry.o traps.o idle.o time.o misc.o \
- process.o align.o \
+ process.o \
setup.o \
ppc_htab.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
# These are here while we do the architecture merge
else
-obj-y := idle.o align.o
+obj-y := idle.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
+++ /dev/null
-/*
- * align.c - handle alignment exceptions for the Power PC.
- *
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/cache.h>
-
-struct aligninfo {
- unsigned char len;
- unsigned char flags;
-};
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-#define OPCD(inst) (((inst) & 0xFC000000) >> 26)
-#define RS(inst) (((inst) & 0x03E00000) >> 21)
-#define RA(inst) (((inst) & 0x001F0000) >> 16)
-#define IS_XFORM(code) ((code) == 31)
-#endif
-
-#define INVALID { 0, 0 }
-
-#define LD 1 /* load */
-#define ST 2 /* store */
-#define SE 4 /* sign-extend value */
-#define F 8 /* to/from fp regs */
-#define U 0x10 /* update index register */
-#define M 0x20 /* multiple load/store */
-#define S 0x40 /* single-precision fp, or byte-swap value */
-#define SX 0x40 /* byte count in XER */
-#define HARD 0x80 /* string, stwcx. */
-
-#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
-
-/*
- * The PowerPC stores certain bits of the instruction that caused the
- * alignment exception in the DSISR register. This array maps those
- * bits to information about the operand length and what the
- * instruction would do.
- */
-static struct aligninfo aligninfo[128] = {
- { 4, LD }, /* 00 0 0000: lwz / lwarx */
- INVALID, /* 00 0 0001 */
- { 4, ST }, /* 00 0 0010: stw */
- INVALID, /* 00 0 0011 */
- { 2, LD }, /* 00 0 0100: lhz */
- { 2, LD+SE }, /* 00 0 0101: lha */
- { 2, ST }, /* 00 0 0110: sth */
- { 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F+S }, /* 00 0 1000: lfs */
- { 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F+S }, /* 00 0 1010: stfs */
- { 8, ST+F }, /* 00 0 1011: stfd */
- INVALID, /* 00 0 1100 */
- INVALID, /* 00 0 1101: ld/ldu/lwa */
- INVALID, /* 00 0 1110 */
- INVALID, /* 00 0 1111: std/stdu */
- { 4, LD+U }, /* 00 1 0000: lwzu */
- INVALID, /* 00 1 0001 */
- { 4, ST+U }, /* 00 1 0010: stwu */
- INVALID, /* 00 1 0011 */
- { 2, LD+U }, /* 00 1 0100: lhzu */
- { 2, LD+SE+U }, /* 00 1 0101: lhau */
- { 2, ST+U }, /* 00 1 0110: sthu */
- { 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
- { 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
- { 8, ST+F+U }, /* 00 1 1011: stfdu */
- INVALID, /* 00 1 1100 */
- INVALID, /* 00 1 1101 */
- INVALID, /* 00 1 1110 */
- INVALID, /* 00 1 1111 */
- INVALID, /* 01 0 0000: ldx */
- INVALID, /* 01 0 0001 */
- INVALID, /* 01 0 0010: stdx */
- INVALID, /* 01 0 0011 */
- INVALID, /* 01 0 0100 */
- INVALID, /* 01 0 0101: lwax */
- INVALID, /* 01 0 0110 */
- INVALID, /* 01 0 0111 */
- { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
- { 4, LD+M+HARD }, /* 01 0 1001: lswi */
- { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
- { 4, ST+M+HARD }, /* 01 0 1011: stswi */
- INVALID, /* 01 0 1100 */
- INVALID, /* 01 0 1101 */
- INVALID, /* 01 0 1110 */
- INVALID, /* 01 0 1111 */
- INVALID, /* 01 1 0000: ldux */
- INVALID, /* 01 1 0001 */
- INVALID, /* 01 1 0010: stdux */
- INVALID, /* 01 1 0011 */
- INVALID, /* 01 1 0100 */
- INVALID, /* 01 1 0101: lwaux */
- INVALID, /* 01 1 0110 */
- INVALID, /* 01 1 0111 */
- INVALID, /* 01 1 1000 */
- INVALID, /* 01 1 1001 */
- INVALID, /* 01 1 1010 */
- INVALID, /* 01 1 1011 */
- INVALID, /* 01 1 1100 */
- INVALID, /* 01 1 1101 */
- INVALID, /* 01 1 1110 */
- INVALID, /* 01 1 1111 */
- INVALID, /* 10 0 0000 */
- INVALID, /* 10 0 0001 */
- { 0, ST+HARD }, /* 10 0 0010: stwcx. */
- INVALID, /* 10 0 0011 */
- INVALID, /* 10 0 0100 */
- INVALID, /* 10 0 0101 */
- INVALID, /* 10 0 0110 */
- INVALID, /* 10 0 0111 */
- { 4, LD+S }, /* 10 0 1000: lwbrx */
- INVALID, /* 10 0 1001 */
- { 4, ST+S }, /* 10 0 1010: stwbrx */
- INVALID, /* 10 0 1011 */
- { 2, LD+S }, /* 10 0 1100: lhbrx */
- INVALID, /* 10 0 1101 */
- { 2, ST+S }, /* 10 0 1110: sthbrx */
- INVALID, /* 10 0 1111 */
- INVALID, /* 10 1 0000 */
- INVALID, /* 10 1 0001 */
- INVALID, /* 10 1 0010 */
- INVALID, /* 10 1 0011 */
- INVALID, /* 10 1 0100 */
- INVALID, /* 10 1 0101 */
- INVALID, /* 10 1 0110 */
- INVALID, /* 10 1 0111 */
- INVALID, /* 10 1 1000 */
- INVALID, /* 10 1 1001 */
- INVALID, /* 10 1 1010 */
- INVALID, /* 10 1 1011 */
- INVALID, /* 10 1 1100 */
- INVALID, /* 10 1 1101 */
- INVALID, /* 10 1 1110 */
- { 0, ST+HARD }, /* 10 1 1111: dcbz */
- { 4, LD }, /* 11 0 0000: lwzx */
- INVALID, /* 11 0 0001 */
- { 4, ST }, /* 11 0 0010: stwx */
- INVALID, /* 11 0 0011 */
- { 2, LD }, /* 11 0 0100: lhzx */
- { 2, LD+SE }, /* 11 0 0101: lhax */
- { 2, ST }, /* 11 0 0110: sthx */
- INVALID, /* 11 0 0111 */
- { 4, LD+F+S }, /* 11 0 1000: lfsx */
- { 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F+S }, /* 11 0 1010: stfsx */
- { 8, ST+F }, /* 11 0 1011: stfdx */
- INVALID, /* 11 0 1100 */
- INVALID, /* 11 0 1101: lmd */
- INVALID, /* 11 0 1110 */
- INVALID, /* 11 0 1111: stmd */
- { 4, LD+U }, /* 11 1 0000: lwzux */
- INVALID, /* 11 1 0001 */
- { 4, ST+U }, /* 11 1 0010: stwux */
- INVALID, /* 11 1 0011 */
- { 2, LD+U }, /* 11 1 0100: lhzux */
- { 2, LD+SE+U }, /* 11 1 0101: lhaux */
- { 2, ST+U }, /* 11 1 0110: sthux */
- INVALID, /* 11 1 0111 */
- { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
- { 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
- { 8, ST+F+U }, /* 11 1 1011: stfdux */
- INVALID, /* 11 1 1100 */
- INVALID, /* 11 1 1101 */
- INVALID, /* 11 1 1110 */
- INVALID, /* 11 1 1111 */
-};
-
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
-int
-fix_alignment(struct pt_regs *regs)
-{
- int instr, nb, flags;
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- int opcode, f1, f2, f3;
-#endif
- int i, t;
- int reg, areg;
- int offset, nb0;
- unsigned char __user *addr;
- unsigned char *rptr;
- union {
- long l;
- float f;
- double d;
- unsigned char v[8];
- } data;
-
- CHECK_FULL_REGS(regs);
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- /* The 4xx-family & Book-E processors have no DSISR register,
- * so we emulate it.
- * The POWER4 has a DSISR register but doesn't set it on
- * an alignment fault. -- paulus
- */
-
- if (__get_user(instr, (unsigned int __user *) regs->nip))
- return 0;
- opcode = OPCD(instr);
- reg = RS(instr);
- areg = RA(instr);
-
- if (!IS_XFORM(opcode)) {
- f1 = 0;
- f2 = (instr & 0x04000000) >> 26;
- f3 = (instr & 0x78000000) >> 27;
- } else {
- f1 = (instr & 0x00000006) >> 1;
- f2 = (instr & 0x00000040) >> 6;
- f3 = (instr & 0x00000780) >> 7;
- }
-
- instr = ((f1 << 5) | (f2 << 4) | f3);
-#else
- reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */
- areg = regs->dsisr & 0x1f; /* register to update */
- instr = (regs->dsisr >> 10) & 0x7f;
-#endif
-
- nb = aligninfo[instr].len;
- if (nb == 0) {
- long __user *p;
- int i;
-
- if (instr != DCBZ)
- return 0; /* too hard or invalid instruction */
- /*
- * The dcbz (data cache block zero) instruction
- * gives an alignment fault if used on non-cacheable
- * memory. We handle the fault mainly for the
- * case when we are running with the cache disabled
- * for debugging.
- */
- p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
- if (user_mode(regs)
- && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
- return -EFAULT;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- if (__put_user(0, p+i))
- return -EFAULT;
- return 1;
- }
-
- flags = aligninfo[instr].flags;
- if ((flags & (LD|ST)) == 0)
- return 0;
-
- /* For the 4xx-family & Book-E processors, the 'dar' field of the
- * pt_regs structure is overloaded and is really from the DEAR.
- */
-
- addr = (unsigned char __user *)regs->dar;
-
- if (flags & M) {
- /* lmw, stmw, lswi/x, stswi/x */
- nb0 = 0;
- if (flags & HARD) {
- if (flags & SX) {
- nb = regs->xer & 127;
- if (nb == 0)
- return 1;
- } else {
- if (__get_user(instr,
- (unsigned int __user *)regs->nip))
- return 0;
- nb = (instr >> 11) & 0x1f;
- if (nb == 0)
- nb = 32;
- }
- if (nb + reg * 4 > 128) {
- nb0 = nb + reg * 4 - 128;
- nb = 128 - reg * 4;
- }
- } else {
- /* lwm, stmw */
- nb = (32 - reg) * 4;
- }
-
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
- return -EFAULT; /* bad address */
-
- rptr = (unsigned char *) ®s->gpr[reg];
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) ®s->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- }
- for (; (i & 3) != 0; ++i)
- rptr[i] = 0;
- } else {
- for (i = 0; i < nb; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) ®s->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- }
- }
- return 1;
- }
-
- offset = 0;
- if (nb < 4) {
- /* read/write the least significant bits */
- data.l = 0;
- offset = 4 - nb;
- }
-
- /* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
-
- if (flags & F) {
- preempt_disable();
- if (regs->msr & MSR_FP)
- giveup_fpu(current);
- preempt_enable();
- }
-
- /* If we read the operand, copy it in, else get register values */
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- data.d = current->thread.fpr[reg];
- } else {
- data.l = regs->gpr[reg];
- }
-
- switch (flags & ~U) {
- case LD+SE: /* sign extend */
- if (data.v[2] >= 0x80)
- data.v[0] = data.v[1] = -1;
- break;
-
- case LD+S: /* byte-swap */
- case ST+S:
- if (nb == 2) {
- SWAP(data.v[2], data.v[3]);
- } else {
- SWAP(data.v[0], data.v[3]);
- SWAP(data.v[1], data.v[2]);
- }
- break;
-
- /* Single-precision FP load and store require conversions... */
- case LD+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_fd(&data.f, &data.d, ¤t->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- case ST+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_df(&data.d, &data.f, ¤t->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- }
-
- if (flags & ST) {
- for (i = 0; i < nb; ++i)
- if (__put_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- current->thread.fpr[reg] = data.d;
- } else {
- regs->gpr[reg] = data.l;
- }
-
- if (flags & U)
- regs->gpr[areg] = regs->dar;
-
- return 1;
-}
static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_rev1_53c810(struct pci_dev* dev);
static void fixup_cpc710_pci64(struct pci_dev* dev);
#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC_MULTIPLATFORM
case BI_MACHTYPE:
- _machine = data[0];
+ /* Machine types changed with the merge. Since the
+ * bootinfo are now deprecated, we can just hard code
+ * the appropriate conversion here for when we are
+ * called with yaboot which passes us a machine type
+ * this way.
+ */
+ switch(data[0]) {
+ case 1: _machine = _MACH_prep; break;
+ case 2: _machine = _MACH_Pmac; break;
+ case 4: _machine = _MACH_chrp; break;
+ default:
+ _machine = data[0];
+ }
break;
#endif
case BI_MEMSIZE:
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
- if (!PageReserved(page)
- && !test_bit(PG_arch_1, &page->flags)) {
- if (vma->vm_mm == current->active_mm) {
#ifdef CONFIG_8xx
- /* On 8xx, cache control instructions (particularly
- * "dcbst" from flush_dcache_icache) fault as write
- * operation if there is an unpopulated TLB entry
- * for the address in question. To workaround that,
- * we invalidate the TLB here, thus avoiding dcbst
- * misbehaviour.
- */
- _tlbie(address);
+ /* On 8xx, the TLB handlers work in 2 stages:
+ * First, a zeroed entry is loaded by TLBMiss handler,
+ * which causes the TLBError handler to be triggered.
+ * That means the zeroed TLB has to be invalidated
+ * whenever a page miss occurs.
+ */
+ _tlbie(address);
#endif
+ if (!PageReserved(page)
+ && !test_bit(PG_arch_1, &page->flags)) {
+ if (vma->vm_mm == current->active_mm)
__flush_dcache_icache((void *) address);
- } else
+ else
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
+struct seq_file;
+
extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_ads_init_IRQ(void) __init;
extern void mpc85xx_ads_map_io(void) __init;
#include <linux/config.h>
#include <linux/init.h>
-#include <linux/seq_file.h>
#include <asm/ppcboot.h>
#define BOARD_CCSRBAR ((uint)0xe0000000)
extern void mpc85xx_restart(char *cmd);
extern void mpc85xx_power_off(void);
extern void mpc85xx_halt(void);
-extern int mpc85xx_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_init_IRQ(void) __init;
extern unsigned long mpc85xx_find_end_of_memory(void) __init;
extern void mpc85xx_calibrate_decr(void) __init;
},
},
{
- .ppc_sys_name = "8343E",
+ .ppc_sys_name = "8347E",
.mask = 0xFFFF0000,
.value = 0x80540000,
+ .num_devices = 9,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8347",
+ .mask = 0xFFFF0000,
+ .value = 0x80550000,
+ .num_devices = 8,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8343E",
+ .mask = 0xFFFF0000,
+ .value = 0x80560000,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
{
.ppc_sys_name = "8343",
.mask = 0xFFFF0000,
- .value = 0x80550000,
+ .value = 0x80570000,
.num_devices = 7,
.device_list = (enum ppc_sys_devices[])
{
sccc = base + (addr & ~PAGE_MASK);
sccd = sccc + 0x10;
- } else {
+ }
+#ifdef CONFIG_PPC_CHRP
+ else {
base = (volatile unsigned char *) isa_io_base;
if (_machine == _MACH_chrp)
base = (volatile unsigned char *)
RXRDY = 1;
DLAB = 0x80;
}
+#endif /* CONFIG_PPC_CHRP */
#elif defined(CONFIG_GEMINI)
/* should already be mapped by the kernel boot */
sccc = (volatile unsigned char *) 0xffeffb0d;
+++ /dev/null
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit.
-
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config XMON
- bool "Include xmon kernel debugger"
- depends on DEBUGGER && !PPC_ISERIES
- help
- Include in-kernel hooks for the xmon kernel monitor/debugger.
- Unless you are intending to debug the kernel, say N here.
- Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
- nothing will appear on the screen (xmon writes directly to the
- framebuffer memory).
- The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
- early during boot. 'xmon=on' will just enable the xmon debugger hooks.
- 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
-
-config XMON_DEFAULT
- bool "Enable xmon by default"
- depends on XMON
- help
- xmon is normally disabled unless booted with 'xmon=on'.
- Use 'xmon=off' to disable xmon init during runtime.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-endmenu
+++ /dev/null
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-# Adjusted for PPC64 by Tom Gall
-#
-
-KERNELLOAD := 0xc000000000000000
-
-# Set default 32 bits cross compilers for vdso and boot wrapper
-CROSS32_COMPILE ?=
-
-CROSS32CC := $(CROSS32_COMPILE)gcc
-CROSS32AS := $(CROSS32_COMPILE)as
-CROSS32LD := $(CROSS32_COMPILE)ld
-CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
-
-# If we have a biarch compiler, use it for 32 bits cross compile if
-# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
-# target type to target compilers
-
-HAS_BIARCH := $(call cc-option-yn, -m64)
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-CROSS32CC := $(CC) -m32
-CROSS32AS := $(AS) -a32
-CROSS32LD := $(LD) -m elf32ppc
-CROSS32OBJCOPY := $(OBJCOPY)
-endif
-override AS += -a64
-override LD += -m elf64ppc
-override CC += -m64
-endif
-
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
-
-new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
-
-ifeq ($(new_nm),y)
-NM := $(NM) --synthetic
-
-endif
-
-CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__
-
-LDFLAGS := -m elf64ppc
-LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
-CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \
- -mcall-aixdesc
-# Temporary hack until we have migrated to asm-powerpc
-CPPFLAGS += -Iarch/$(ARCH)/include
-
-GCC_VERSION := $(call cc-version)
-GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
-
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
- CFLAGS += $(call cc-option,-mcpu=970)
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mtune=power4)
-endif
-
-# No AltiVec instruction when building kernel
-CFLAGS += $(call cc-option, -mno-altivec)
-
-# Enable unit-at-a-time mode when possible. It shrinks the
-# kernel considerably.
-CFLAGS += $(call cc-option,-funit-at-a-time)
-
-head-y := arch/ppc64/kernel/head.o
-head-y += arch/powerpc/kernel/fpu.o
-head-y += arch/powerpc/kernel/entry_64.o
-
-core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
-core-y += arch/powerpc/mm/
-core-y += arch/powerpc/sysdev/
-core-y += arch/powerpc/platforms/
-core-y += arch/powerpc/lib/
-core-$(CONFIG_XMON) += arch/powerpc/xmon/
-drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
-
-boot := arch/ppc64/boot
-
-boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
-boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
-boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
-$(boottargets-y): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_PMAC) := vmlinux
-bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
-BOOTIMAGE := $(bootimage-y)
-install: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
-defaultimage-$(CONFIG_PPC_MAPLE) := zImage
-defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
-KBUILD_IMAGE := $(defaultimage-y)
-all: $(KBUILD_IMAGE)
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
- # Temporary hack until we have migrated to asm-powerpc
- $(Q)rm -rf arch/$(ARCH)/include
-
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
- $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
- $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-define archhelp
- echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
- echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,'
- echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
- echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)'
- echo ' zImage - zImage for pSeries machines'
- echo ' zImage.initrd - zImage with initrd for pSeries machines'
-endef
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=m
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
-# CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:23 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_SMU=y
-CONFIG_THERM_PM72=y
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-CONFIG_PPC_ISERIES=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_ISERIES_VETH=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# iSeries device drivers
-#
-CONFIG_VIOCONS=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_IDE_TASK_IOCTL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_TI=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-# CONFIG_IRQSTACKS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:32:17 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBMVETH=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVCS=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
+++ /dev/null
-#
-# Makefile for the linux ppc64 kernel.
-#
-
-obj-y += idle.o align.o
-
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o
bool
default y
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
# Turn off some random 386 crap that can affect device config
config ISA
bool
/*
* arch/v850/kernel/irq.c -- High-level interrupt handling
*
- * Copyright (C) 2001,02,03,04 NEC Electronics Corporation
- * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org>
+ * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org>
* Copyright (C) 1994-2000 Ralf Baechle
* Copyright (C) 1992 Linus Torvalds
*
#include <asm/system.h>
/*
- * Controller mappings for all interrupt sources:
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves, it doesn't deserve
+ * a generic callback i think.
*/
-irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
- [0 ... NR_IRQS-1] = {
- .handler = &no_irq_type,
- .lock = SPIN_LOCK_UNLOCKED
- }
-};
-
-/*
- * Special irq handlers.
- */
-
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
-{
- return IRQ_NONE;
-}
-
-/*
- * Generic no controller code
- */
-
-static void enable_none(unsigned int irq) { }
-static unsigned int startup_none(unsigned int irq) { return 0; }
-static void disable_none(unsigned int irq) { }
-static void ack_none(unsigned int irq)
+void ack_bad_irq(unsigned int irq)
{
- /*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
printk("received IRQ %d with unknown interrupt type\n", irq);
}
-/* startup is the same as "enable", shutdown is same as "disable" */
-#define shutdown_none disable_none
-#define end_none enable_none
-
-struct hw_interrupt_type no_irq_type = {
- .typename = "none",
- .startup = startup_none,
- .shutdown = shutdown_none,
- .enable = enable_none,
- .disable = disable_none,
- .ack = ack_none,
- .end = end_none
-};
-
volatile unsigned long irq_err_count, spurious_count;
/*
int show_interrupts(struct seq_file *p, void *v)
{
- int i = *(loff_t *) v;
- struct irqaction * action;
- unsigned long flags;
+ int irq = *(loff_t *) v;
- if (i == 0) {
+ if (irq == 0) {
+ int cpu;
seq_puts(p, " ");
- for (i=0; i < 1 /*smp_num_cpus*/; i++)
- seq_printf(p, "CPU%d ", i);
+ for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
+ seq_printf(p, "CPU%d ", cpu);
seq_putc(p, '\n');
}
- if (i < NR_IRQS) {
- int j, count, num;
- const char *type_name = irq_desc[i].handler->typename;
- spin_lock_irqsave(&irq_desc[j].lock, flags);
- action = irq_desc[i].action;
- if (!action)
- goto skip;
+ if (irq < NR_IRQS) {
+ unsigned long flags;
+ struct irqaction *action;
- count = 0;
- num = -1;
- for (j = 0; j < NR_IRQS; j++)
- if (irq_desc[j].handler->typename == type_name) {
- if (i == j)
- num = count;
- count++;
- }
+ spin_lock_irqsave(&irq_desc[irq].lock, flags);
- seq_printf(p, "%3d: ",i);
- seq_printf(p, "%10u ", kstat_irqs(i));
- if (count > 1) {
- int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
- seq_printf(p, " %*s%d", 14 - prec, type_name, num);
- } else
- seq_printf(p, " %14s", type_name);
+ action = irq_desc[irq].action;
+ if (action) {
+ int j;
+ int count = 0;
+ int num = -1;
+ const char *type_name = irq_desc[irq].handler->typename;
+
+ for (j = 0; j < NR_IRQS; j++)
+ if (irq_desc[j].handler->typename == type_name){
+ if (irq == j)
+ num = count;
+ count++;
+ }
+
+ seq_printf(p, "%3d: ",irq);
+ seq_printf(p, "%10u ", kstat_irqs(irq));
+ if (count > 1) {
+ int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
+ seq_printf(p, " %*s%d", 14 - prec,
+ type_name, num);
+ } else
+ seq_printf(p, " %14s", type_name);
- seq_printf(p, " %s", action->name);
- for (action=action->next; action; action = action->next)
- seq_printf(p, ", %s", action->name);
- seq_putc(p, '\n');
-skip:
- spin_unlock_irqrestore(&irq_desc[j].lock, flags);
- } else if (i == NR_IRQS)
- seq_printf(p, "ERR: %10lu\n", irq_err_count);
- return 0;
-}
-
-/*
- * This should really return information about whether
- * we should do bottom half handling etc. Right now we
- * end up _always_ checking the bottom half, which is a
- * waste of time and is not what some drivers would
- * prefer.
- */
-int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
-{
- int status = 1; /* Force the "do bottom halves" bit */
- int ret;
-
- if (!(action->flags & SA_INTERRUPT))
- local_irq_enable();
-
- do {
- ret = action->handler(irq, action->dev_id, regs);
- if (ret == IRQ_HANDLED)
- status |= action->flags;
- action = action->next;
- } while (action);
- if (status & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
- local_irq_disable();
-
- return status;
-}
-
-/*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock.
- */
-
-/**
- * disable_irq_nosync - disable an irq without waiting
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Disables of an interrupt
- * stack. Unlike disable_irq(), this function does not ensure existing
- * instances of the IRQ handler have completed before returning.
- *
- * This function may be called from IRQ context.
- */
-
-void inline disable_irq_nosync(unsigned int irq)
-{
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- if (!desc->depth++) {
- desc->status |= IRQ_DISABLED;
- desc->handler->disable(irq);
- }
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-/**
- * disable_irq - disable an irq and wait for completion
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Disables of an interrupt
- * stack. That is for two disables you need two enables. This
- * function waits for any pending IRQ handlers for this interrupt
- * to complete before returning. If you use this function while
- * holding a resource the IRQ handler may need you will deadlock.
- *
- * This function may be called - with care - from IRQ context.
- */
-
-void disable_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- synchronize_irq(irq);
-}
+ seq_printf(p, " %s", action->name);
+ for (action=action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+ seq_putc(p, '\n');
+ }
-/**
- * enable_irq - enable interrupt handling on an irq
- * @irq: Interrupt to enable
- *
- * Re-enables the processing of interrupts on this IRQ line
- * providing no disable_irq calls are now in effect.
- *
- * This function may be called from IRQ context.
- */
-
-void enable_irq(unsigned int irq)
-{
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
+ spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
+ } else if (irq == NR_IRQS)
+ seq_printf(p, "ERR: %10lu\n", irq_err_count);
- spin_lock_irqsave(&desc->lock, flags);
- switch (desc->depth) {
- case 1: {
- unsigned int status = desc->status & ~IRQ_DISABLED;
- desc->status = status;
- if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
- desc->status = status | IRQ_REPLAY;
- hw_resend_irq(desc->handler,irq);
- }
- desc->handler->enable(irq);
- /* fall-through */
- }
- default:
- desc->depth--;
- break;
- case 0:
- printk("enable_irq(%u) unbalanced from %p\n", irq,
- __builtin_return_address(0));
- }
- spin_unlock_irqrestore(&desc->lock, flags);
+ return 0;
}
/* Handle interrupt IRQ. REGS are the registers at the time of ther
interrupt. */
unsigned int handle_irq (int irq, struct pt_regs *regs)
{
- /*
- * We ack quickly, we don't want the irq controller
- * thinking we're snobs just because some other CPU has
- * disabled global interrupts (we have already done the
- * INT_ACK cycles, it's too late to try to pretend to the
- * controller that we aren't taking the interrupt).
- *
- * 0 return value means that this irq is already being
- * handled by some other CPU. (or is disabled)
- */
- int cpu = smp_processor_id();
- irq_desc_t *desc = irq_desc + irq;
- struct irqaction * action;
- unsigned int status;
-
irq_enter();
- kstat_cpu(cpu).irqs[irq]++;
- spin_lock(&desc->lock);
- desc->handler->ack(irq);
- /*
- REPLAY is when Linux resends an IRQ that was dropped earlier
- WAITING is used by probe to mark irqs that are being tested
- */
- status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
- status |= IRQ_PENDING; /* we _want_ to handle it */
-
- /*
- * If the IRQ is disabled for whatever reason, we cannot
- * use the action we have.
- */
- action = NULL;
- if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
- action = desc->action;
- status &= ~IRQ_PENDING; /* we commit to handling */
- status |= IRQ_INPROGRESS; /* we are handling it */
- }
- desc->status = status;
-
- /*
- * If there is no IRQ handler or it was disabled, exit early.
- Since we set PENDING, if another processor is handling
- a different instance of this same irq, the other processor
- will take care of it.
- */
- if (unlikely(!action))
- goto out;
-
- /*
- * Edge triggered interrupts need to remember
- * pending events.
- * This applies to any hw interrupts that allow a second
- * instance of the same irq to arrive while we are in handle_irq
- * or in the handler. But the code here only handles the _second_
- * instance of the irq, not the third or fourth. So it is mostly
- * useful for irq hardware that does not mask cleanly in an
- * SMP environment.
- */
- for (;;) {
- spin_unlock(&desc->lock);
- handle_IRQ_event(irq, regs, action);
- spin_lock(&desc->lock);
-
- if (likely(!(desc->status & IRQ_PENDING)))
- break;
- desc->status &= ~IRQ_PENDING;
- }
- desc->status &= ~IRQ_INPROGRESS;
-
-out:
- /*
- * The ->end() handler has to deal with interrupts which got
- * disabled while the handler was running.
- */
- desc->handler->end(irq);
- spin_unlock(&desc->lock);
-
+ __do_IRQ(irq, regs);
irq_exit();
-
return 1;
}
-/**
- * request_irq - allocate an interrupt line
- * @irq: Interrupt line to allocate
- * @handler: Function to be called when the IRQ occurs
- * @irqflags: Interrupt type flags
- * @devname: An ascii name for the claiming device
- * @dev_id: A cookie passed back to the handler function
- *
- * This call allocates interrupt resources and enables the
- * interrupt line and IRQ handling. From the point this
- * call is made your handler function may be invoked. Since
- * your handler function must clear any interrupt the board
- * raises, you must take care both to initialise your hardware
- * and to set up the interrupt handler in the right order.
- *
- * Dev_id must be globally unique. Normally the address of the
- * device data structure is used as the cookie. Since the handler
- * receives this value it makes sense to use it.
- *
- * If your interrupt is shared you must pass a non NULL dev_id
- * as this is required when freeing the interrupt.
- *
- * Flags:
- *
- * SA_SHIRQ Interrupt is shared
- *
- * SA_INTERRUPT Disable local interrupts while processing
- *
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
- *
- */
-
-int request_irq(unsigned int irq,
- irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
- const char * devname,
- void *dev_id)
-{
- int retval;
- struct irqaction * action;
-
-#if 1
- /*
- * Sanity-check: shared interrupts should REALLY pass in
- * a real dev-ID, otherwise we'll have trouble later trying
- * to figure out which interrupt is which (messes up the
- * interrupt freeing logic etc).
- */
- if (irqflags & SA_SHIRQ) {
- if (!dev_id)
- printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
- }
-#endif
-
- if (irq >= NR_IRQS)
- return -EINVAL;
- if (!handler)
- return -EINVAL;
-
- action = (struct irqaction *)
- kmalloc(sizeof(struct irqaction), GFP_KERNEL);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irqflags;
- cpus_clear(action->mask);
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function. The function
- * does not return until any executing interrupts for this IRQ
- * have completed.
- *
- * This function may be called from interrupt context.
- *
- * Bugs: Attempting to free an irq in a handler for the same irq hangs
- * the machine.
- */
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- irq_desc_t *desc;
- struct irqaction **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS)
- return;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- for (;;) {
- struct irqaction * action = *p;
- if (action) {
- struct irqaction **pp = p;
- p = &action->next;
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now remove it from the list of entries */
- *pp = action->next;
- if (!desc->action) {
- desc->status |= IRQ_DISABLED;
- desc->handler->shutdown(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- synchronize_irq(irq);
- kfree(action);
- return;
- }
- printk("Trying to free free IRQ%d\n",irq);
- spin_unlock_irqrestore(&desc->lock,flags);
- return;
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck
- * with "IRQ_WAITING" cleared and the interrupt
- * disabled.
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- * probe_irq_on - begin an interrupt autodetect
- *
- * Commence probing for an interrupt. The interrupts are scanned
- * and a mask of potential interrupt lines is returned.
- *
- */
-
-unsigned long probe_irq_on(void)
-{
- unsigned int i;
- irq_desc_t *desc;
- unsigned long val;
- unsigned long delay;
-
- down(&probe_sem);
- /*
- * something may have generated an irq long ago and we want to
- * flush such a longstanding irq before considering it as spurious.
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!irq_desc[i].action)
- irq_desc[i].handler->startup(i);
- spin_unlock_irq(&desc->lock);
- }
-
- /* Wait for longstanding interrupts to trigger. */
- for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
- /* about 20ms delay */ barrier();
-
- /*
- * enable any unassigned irqs
- * (we must startup again here because if a longstanding irq
- * happened in the previous stage, it may have masked itself)
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!desc->action) {
- desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
- if (desc->handler->startup(i))
- desc->status |= IRQ_PENDING;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- /*
- * Wait for spurious interrupts to trigger
- */
- for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
- /* about 100ms delay */ barrier();
-
- /*
- * Now filter out any obviously spurious interrupts
- */
- val = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- /* It triggered already - consider it spurious. */
- if (!(status & IRQ_WAITING)) {
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- } else
- if (i < 32)
- val |= 1 << i;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- return val;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/**
- * probe_irq_mask - scan a bitmap of interrupt lines
- * @val: mask of interrupts to consider
- *
- * Scan the ISA bus interrupt lines and return a bitmap of
- * active interrupts. The interrupt probe logic state is then
- * returned to its previous value.
- *
- * Note: we need to scan all the irq's even though we will
- * only return ISA irq numbers - just so that we reset them
- * all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long val)
-{
- int i;
- unsigned int mask;
-
- mask = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (i < 16 && !(status & IRQ_WAITING))
- mask |= 1 << i;
-
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- return mask & val;
-}
-
-/*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- * probe_irq_off - end an interrupt autodetect
- * @val: mask of potential interrupts (unused)
- *
- * Scans the unused interrupt lines and returns the line which
- * appears to have triggered the interrupt. If no interrupt was
- * found then zero is returned. If more than one interrupt is
- * found then minus the first candidate is returned to indicate
- * their is doubt.
- *
- * The interrupt probe logic state is returned to its previous
- * value.
- *
- * BUGS: When used in a module (which arguably shouldnt happen)
- * nothing prevents two IRQ probe callers from overlapping. The
- * results of this are non-optimal.
- */
-
-int probe_irq_off(unsigned long val)
-{
- int i, irq_found, nr_irqs;
-
- nr_irqs = 0;
- irq_found = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (!(status & IRQ_WAITING)) {
- if (!nr_irqs)
- irq_found = i;
- nr_irqs++;
- }
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- if (nr_irqs > 1)
- irq_found = -irq_found;
- return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction * new)
-{
- int shared = 0;
- unsigned long flags;
- struct irqaction *old, **p;
- irq_desc_t *desc = irq_desc + irq;
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & SA_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /*
- * The following block of code has to be executed atomically
- */
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- if ((old = *p) != NULL) {
- /* Can't share interrupts unless both agree to */
- if (!(old->flags & new->flags & SA_SHIRQ)) {
- spin_unlock_irqrestore(&desc->lock,flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- do {
- p = &old->next;
- old = *p;
- } while (old);
- shared = 1;
- }
-
- *p = new;
-
- if (!shared) {
- desc->depth = 0;
- desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
- desc->handler->startup(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- /* register_irq_proc(irq); */
- return 0;
-}
-
/* Initialize irq handling for IRQs.
BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */
base_irq += interval;
}
}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-void init_irq_proc(void)
-{
-}
-#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
- int i;
-
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt");
if (!pr)
if (!pr->pblk)
return_VALUE(-ENODEV);
- for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+ memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr)
{
- int i;
-
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
- for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(&(pr->power.states[i]), 0,
- sizeof(struct acpi_processor_cx));
+ memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
if (pr->power.states[i].valid) {
pr->power.count = i;
- pr->flags.power = 1;
+ if (pr->power.states[i].type >= ACPI_STATE_C2)
+ pr->flags.power = 1;
}
}
#define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \
"Unknown" : scsi_device_types[n]
-#if 1
+#if 0
static int xmargin=8;
static int amargin=60;
#define PFX "IPMI message handler: "
-#define IPMI_DRIVER_VERSION "36.0"
+#define IPMI_DRIVER_VERSION "38.0"
static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
static int ipmi_init_msghandler(void);
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
- if (smi_info->thread != ERR_PTR(-ENOMEM))
+ if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
}
config TCG_TPM
tristate "TPM Hardware Support"
- depends on EXPERIMENTAL && PCI
+ depends on EXPERIMENTAL
---help---
If you have a TPM security chip in your system, which
implements the Trusted Computing Group's specification,
file->private_data = NULL;
chip->num_opens--;
del_singleshot_timer_sync(&chip->user_read_timer);
+ flush_scheduled_work();
atomic_set(&chip->data_pending, 0);
put_device(chip->dev);
kfree(chip->data_buffer);
int ret_size;
del_singleshot_timer_sync(&chip->user_read_timer);
+ flush_scheduled_work();
ret_size = atomic_read(&chip->data_pending);
atomic_set(&chip->data_pending, 0);
if (ret_size > 0) { /* relay data */
return -EIO;
for (i = 0; i < 6; i++) {
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading header\n");
+ dev_err(chip->dev, "error reading header\n");
return -EIO;
}
- *buf++ = atmel_getb(chip, 0);
+ *buf++ = ioread8(chip->vendor->iobase);
}
/* size of the data received */
dev_err(chip->dev,
"Recv size(%d) less than available space\n", size);
for (; i < size; i++) { /* clear the waiting data anyway */
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading data\n");
+ dev_err(chip->dev, "error reading data\n");
return -EIO;
}
}
/* read all the data available */
for (; i < size; i++) {
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading data\n");
+ dev_err(chip->dev, "error reading data\n");
return -EIO;
}
- *buf++ = atmel_getb(chip, 0);
+ *buf++ = ioread8(chip->vendor->iobase);
}
/* make sure data available is gone */
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
+
if (status & ATML_STATUS_DATA_AVAIL) {
dev_err(chip->dev, "data available is stuck\n");
return -EIO;
dev_dbg(chip->dev, "tpm_atml_send:\n");
for (i = 0; i < count; i++) {
dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]);
- atmel_putb(buf[i], chip, 0);
+ iowrite8(buf[i], chip->vendor->iobase);
}
return count;
static void tpm_atml_cancel(struct tpm_chip *chip)
{
- atmel_putb(ATML_STATUS_ABORT, chip, 1);
+ iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
}
static u8 tpm_atml_status(struct tpm_chip *chip)
{
- return atmel_getb(chip, 1);
+ return ioread8(chip->vendor->iobase + 1);
}
static struct file_operations atmel_ops = {
if (chip) {
if (chip->vendor->have_region)
- atmel_release_region(chip->vendor->base, chip->vendor->region_size);
+ atmel_release_region(chip->vendor->base,
+ chip->vendor->region_size);
atmel_put_base_addr(chip->vendor);
tpm_remove_hardware(chip->dev);
platform_device_unregister(pdev);
driver_register(&atml_drv);
- if (atmel_get_base_addr(&tpm_atmel) != 0) {
+ if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
rc = -ENODEV;
goto err_unreg_drv;
}
- tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1;
+ tpm_atmel.have_region =
+ (atmel_request_region
+ (tpm_atmel.base, tpm_atmel.region_size,
+ "tpm_atmel0") == NULL) ? 0 : 1;
- if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) {
+ if (IS_ERR
+ (pdev =
+ platform_device_register_simple("tpm_atmel", -1, NULL, 0))) {
rc = PTR_ERR(pdev);
goto err_rel_reg;
}
err_unreg_dev:
platform_device_unregister(pdev);
err_rel_reg:
- if (tpm_atmel.have_region)
- atmel_release_region(tpm_atmel.base, tpm_atmel.region_size);
atmel_put_base_addr(&tpm_atmel);
+ if (tpm_atmel.have_region)
+ atmel_release_region(tpm_atmel.base,
+ tpm_atmel.region_size);
err_unreg_drv:
driver_unregister(&atml_drv);
return rc;
#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
#define atmel_request_region request_mem_region
#define atmel_release_region release_mem_region
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+ *vendor)
{
iounmap(vendor->iobase);
}
-static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
{
struct device_node *dn;
unsigned long address, size;
dn = of_find_node_by_name(NULL, "tpm");
if (!dn)
- return 1;
+ return NULL;
if (!device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
- return 1;
+ return NULL;
}
reg = (unsigned int *) get_property(dn, "reg", ®len);
vendor->base = address;
vendor->region_size = size;
- vendor->iobase = ioremap(address, size);
- return 0;
+ return ioremap(vendor->base, vendor->region_size);
}
#else
#define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
return 0;
}
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+ *vendor)
{
}
/* Determine where to talk to device */
-static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
*vendor)
{
int lo, hi;
if (atmel_verify_tpm11() != 0)
- return 1;
+ return NULL;
lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
vendor->base = (hi << 8) | lo;
vendor->region_size = 2;
- return 0;
+ return ioport_map(vendor->base, vendor->region_size);
}
#endif
#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */
-static struct device_driver ixp4xx_i2c_driver;
+static struct platform_driver ixp4xx_i2c_driver;
static inline int ixp4xx_scl_pin(void *data)
{
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
- strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name,
+ strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.driver.name,
I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data;
gpio_line_set(gpio->sda_pin, 0);
if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
- printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id);
+ printk(KERN_ERR "ERROR: Could not install %s\n",
+ plat_dev->dev.bus_id);
kfree(drv_data);
return err;
This option enables the use of the sleep LED as a hard drive
activity LED.
+config BLK_DEV_IDE_SWARM
+ tristate "IDE for Sibyte evaluation boards"
+ depends on SIBYTE_SB1xxx_SOC
+
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
-obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/
+obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/
obj-$(CONFIG_BLK_DEV_HD) += legacy/
obj-$(CONFIG_ETRAX_IDE) += cris/
--- /dev/null
+obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o
--- /dev/null
+/*
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Derived loosely from ide-pmac.c, so:
+ * Copyright (C) 1998 Paul Mackerras.
+ * Copyright (C) 1995-1998 Mark Lord
+ */
+
+/*
+ * Boards with SiByte processors so far have supported IDE devices via
+ * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all
+ * cases, byte-swapping must be avoided for these devices (whereas
+ * other PCI devices, for example, will require swapping). Any
+ * SiByte-targetted kernel including IDE support will include this
+ * file. Probing of a Generic Bus for an IDE device is controlled by
+ * the definition of "SIBYTE_HAVE_IDE", which is provided by
+ * <asm/sibyte/board.h> for Broadcom boards.
+ */
+
+#include <linux/ide.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME "ide-swarm"
+
+static char swarm_ide_string[] = DRV_NAME;
+
+static struct resource swarm_ide_resource = {
+ .name = "SWARM GenBus IDE",
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device *swarm_ide_dev;
+
+/*
+ * swarm_ide_probe - if the board header indicates the existence of
+ * Generic Bus IDE, allocate a HWIF for it.
+ */
+static int __devinit swarm_ide_probe(struct device *dev)
+{
+ ide_hwif_t *hwif;
+ u8 __iomem *base;
+ phys_t offset, size;
+ int i;
+
+ if (!SIBYTE_HAVE_IDE)
+ return -ENODEV;
+
+ /* Find an empty slot. */
+ for (i = 0; i < MAX_HWIFS; i++)
+ if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET])
+ break;
+ if (i >= MAX_HWIFS) {
+ printk(KERN_ERR DRV_NAME ": no free slot for interface\n");
+ return -ENOMEM;
+ }
+
+ hwif = ide_hwifs + i;
+
+ base = ioremap(A_IO_EXT_BASE, 0x800);
+ offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+ size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+ iounmap(base);
+
+ offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+ size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+ if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+ printk(KERN_INFO DRV_NAME
+ ": IDE interface at GenBus disabled\n");
+ return -EBUSY;
+ }
+
+ printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
+ IDE_CS);
+
+ swarm_ide_resource.start = offset;
+ swarm_ide_resource.end = offset + size - 1;
+ if (request_resource(&iomem_resource, &swarm_ide_resource)) {
+ printk(KERN_ERR DRV_NAME
+ ": can't request I/O memory resource\n");
+ return -EBUSY;
+ }
+
+ base = ioremap(offset, size);
+
+ /* Setup MMIO ops. */
+ default_hwif_mmiops(hwif);
+ /* Prevent resource map manipulation. */
+ hwif->mmio = 2;
+ hwif->noprobe = 0;
+
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
+ hwif->hw.io_ports[i] =
+ (unsigned long)(base + ((0x1f0 + i) << 5));
+ hwif->hw.io_ports[IDE_CONTROL_OFFSET] =
+ (unsigned long)(base + (0x3f6 << 5));
+ hwif->hw.irq = K_INT_GB_IDE;
+
+ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+ hwif->irq = hwif->hw.irq;
+
+ dev_set_drvdata(dev, hwif);
+
+ return 0;
+}
+
+static struct device_driver swarm_ide_driver = {
+ .name = swarm_ide_string,
+ .bus = &platform_bus_type,
+ .probe = swarm_ide_probe,
+};
+
+static void swarm_ide_platform_release(struct device *device)
+{
+ struct platform_device *pldev;
+
+ /* free device */
+ pldev = to_platform_device(device);
+ kfree(pldev);
+}
+
+static int __devinit swarm_ide_init_module(void)
+{
+ struct platform_device *pldev;
+ int err;
+
+ printk(KERN_INFO "SWARM IDE driver\n");
+
+ if (driver_register(&swarm_ide_driver)) {
+ printk(KERN_ERR "Driver registration failed\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto out_unregister_driver;
+ }
+
+ memset (pldev, 0, sizeof (*pldev));
+ pldev->name = swarm_ide_string;
+ pldev->id = 0;
+ pldev->dev.release = swarm_ide_platform_release;
+
+ if (platform_device_register(pldev)) {
+ err = -ENODEV;
+ goto out_free_pldev;
+ }
+
+ if (!pldev->dev.driver) {
+ /*
+ * The driver was not bound to this device, there was
+ * no hardware at this address. Unregister it, as the
+ * release fuction will take care of freeing the
+ * allocated structure
+ */
+ platform_device_unregister (pldev);
+ }
+
+ swarm_ide_dev = pldev;
+
+ return 0;
+
+out_free_pldev:
+ kfree(pldev);
+
+out_unregister_driver:
+ driver_unregister(&swarm_ide_driver);
+out:
+ return err;
+}
+
+module_init(swarm_ide_init_module);
/****************************************/
static struct usb_device_id hfcusb_idtab[] = {
{
- .idVendor = 0x0959,
- .idProduct = 0x2bd0,
+ USB_DEVICE(0x0959, 0x2bd0),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_OFF, {4, 0, 2, 1},
"ISDN USB TA (Cologne Chip HFC-S USB based)"}),
},
{
- .idVendor = 0x0675,
- .idProduct = 0x1688,
+ USB_DEVICE(0x0675, 0x1688),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {1, 2, 0, 0},
"DrayTek miniVigor 128 USB ISDN TA"}),
},
{
- .idVendor = 0x07b0,
- .idProduct = 0x0007,
+ USB_DEVICE(0x07b0, 0x0007),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Billion tiny USB ISDN TA 128"}),
},
{
- .idVendor = 0x0742,
- .idProduct = 0x2008,
+ USB_DEVICE(0x0742, 0x2008),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Stollmann USB TA"}),
},
{
- .idVendor = 0x0742,
- .idProduct = 0x2009,
+ USB_DEVICE(0x0742, 0x2009),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Aceex USB ISDN TA"}),
},
{
- .idVendor = 0x0742,
- .idProduct = 0x200A,
+ USB_DEVICE(0x0742, 0x200A),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"OEM USB ISDN TA"}),
},
{
- .idVendor = 0x08e3,
- .idProduct = 0x0301,
+ USB_DEVICE(0x08e3, 0x0301),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {2, 0, 1, 4},
"Olitec USB RNIS"}),
},
{
- .idVendor = 0x07fa,
- .idProduct = 0x0846,
+ USB_DEVICE(0x07fa, 0x0846),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Bewan Modem RNIS USB"}),
},
{
- .idVendor = 0x07fa,
- .idProduct = 0x0847,
+ USB_DEVICE(0x07fa, 0x0847),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Djinn Numeris USB"}),
},
{
- .idVendor = 0x07b0,
- .idProduct = 0x0006,
+ USB_DEVICE(0x07b0, 0x0006),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Twister ISDN TA"}),
},
+ { }
};
-
/***************************************************************/
/* structure defining input+output fifos (interrupt/bulk mode) */
/***************************************************************/
}
}
- ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE);
+ ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE);
if (!ret)
- ret = page->mapping->a_ops->commit_write(NULL, page, 0,
+ ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0,
PAGE_SIZE);
if (ret) {
unlock_page(page);
if (cnt > 0 ) {
printk(KERN_WARNING
"md: %s(pid %d) used deprecated START_ARRAY ioctl. "
- "This will not be supported beyond 2.6\n",
+ "This will not be supported beyond July 2006\n",
current->comm, current->pid);
cnt--;
}
allow_signal(SIGKILL);
while (!kthread_should_stop()) {
- wait_event_timeout(thread->wqueue,
- test_bit(THREAD_WAKEUP, &thread->flags)
- || kthread_should_stop(),
- thread->timeout);
+ /* We need to wait INTERRUPTIBLE so that
+ * we don't add to the load-average.
+ * That means we need to be sure no signals are
+ * pending
+ */
+ if (signal_pending(current))
+ flush_signals(current);
+
+ wait_event_interruptible_timeout
+ (thread->wqueue,
+ test_bit(THREAD_WAKEUP, &thread->flags)
+ || kthread_should_stop(),
+ thread->timeout);
try_to_freeze();
clear_bit(THREAD_WAKEUP, &thread->flags);
curr_events = disk_stat_read(disk, sectors[0]) +
disk_stat_read(disk, sectors[1]) -
atomic_read(&disk->sync_io);
- /* Allow some slack between valud of curr_events and last_events,
- * as there are some uninteresting races.
+ /* The difference between curr_events and last_events
+ * will be affected by any new non-sync IO (making
+ * curr_events bigger) and any difference in the amount of
+ * in-flight syncio (making current_events bigger or smaller)
+ * The amount in-flight is currently limited to
+ * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6
+ * which is at most 4096 sectors.
+ * These numbers are fairly fragile and should be made
+ * more robust, probably by enforcing the
+ * 'window size' that md_do_sync sort-of uses.
+ *
* Note: the following is an unsigned comparison.
*/
- if ((curr_events - rdev->last_events + 32) > 64) {
+ if ((curr_events - rdev->last_events + 4096) > 8192) {
rdev->last_events = curr_events;
idle = 0;
}
if (currspeed > sysctl_speed_limit_min) {
if ((currspeed > sysctl_speed_limit_max) ||
!is_mddev_idle(mddev)) {
- msleep(250);
+ msleep(500);
goto repeat;
}
}
if (cinergyt2->stream_urb[i])
usb_free_urb(cinergyt2->stream_urb[i]);
- pci_free_consistent(NULL, STREAM_URB_COUNT*STREAM_BUF_SIZE,
+ usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE,
cinergyt2->streambuf, cinergyt2->streambuf_dmahandle);
}
{
int i;
- cinergyt2->streambuf = pci_alloc_consistent(NULL,
- STREAM_URB_COUNT*STREAM_BUF_SIZE,
- &cinergyt2->streambuf_dmahandle);
+ cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE,
+ SLAB_KERNEL, &cinergyt2->streambuf_dmahandle);
if (!cinergyt2->streambuf) {
dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n");
return -ENOMEM;
input_register_device(cinergyt2->rc_input_dev);
schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
+
+ return 0;
}
static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2)
modname, hw->irq);
/* map the physical PCI memory to virtual memory */
- (void *)hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr,
+ hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr,
(unsigned long)MAX_SIZEOF_S514_MEMORY);
/* map the physical control register memory to virtual memory */
hw->vector = (unsigned long)ioremap(
error->elem_len = elem_len;
error->log_len = log_len;
error->elem = (struct ipw_error_elem *)error->payload;
- error->log = (struct ipw_event *)(error->elem +
- (sizeof(*error->elem) * elem_len));
+ error->log = (struct ipw_event *)(error->elem + elem_len);
ipw_capture_event_log(priv, log_len, error->log);
struct ipw_scan_request_ext scan;
int err = 0, scan_type;
+ if (!(priv->status & STATUS_INIT) ||
+ (priv->status & STATUS_EXIT_PENDING))
+ return 0;
+
down(&priv->sem);
if (priv->status & STATUS_RF_KILL_MASK) {
//FIXME: check return code
sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
rp->clttydev =
- class_device_create(class3270,
+ class_device_create(class3270, NULL,
MKDEV(IBM_TTY3270_MAJOR, rp->minor),
&rp->cdev->dev, "tty%s",
rp->cdev->dev.bus_id);
rp->cltubdev =
- class_device_create(class3270,
+ class_device_create(class3270, NULL,
MKDEV(IBM_FS3270_MAJOR, rp->minor),
&rp->cdev->dev, "tub%s",
rp->cdev->dev.bus_id);
If unsure, say N.
config SCSI_SATA_MV
- tristate "Marvell SATA support"
+ tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
#include <asm/io.h>
#define DRV_NAME "ahci"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.2"
enum {
pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16);
}
-static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
+static void ahci_restart_port(struct ata_port *ap, u32 irq_stat)
{
void __iomem *mmio = ap->host_set->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
u32 tmp;
int work;
+ if ((ap->device[0].class != ATA_DEV_ATAPI) ||
+ ((irq_stat & PORT_IRQ_TF_ERR) == 0))
+ printk(KERN_WARNING "ata%u: port reset, "
+ "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n",
+ ap->id,
+ irq_stat,
+ readl(mmio + HOST_IRQ_STAT),
+ readl(port_mmio + PORT_IRQ_STAT),
+ readl(port_mmio + PORT_CMD),
+ readl(port_mmio + PORT_TFDATA),
+ readl(port_mmio + PORT_SCR_STAT),
+ readl(port_mmio + PORT_SCR_ERR));
+
/* stop DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp &= ~PORT_CMD_START;
tmp |= PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
-
- printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id);
}
static void ahci_eng_timeout(struct ata_port *ap)
struct ata_queued_cmd *qc;
unsigned long flags;
- DPRINTK("ENTER\n");
+ printk(KERN_WARNING "ata%u: handling error/timeout\n", ap->id);
spin_lock_irqsave(&host_set->lock, flags);
- ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
-
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!qc) {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
} else {
+ ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT));
+
/* hack alert! We cannot use the supplied completion
* function from inside the ->eh_strategy_handler() thread.
* libata is the only user of ->eh_strategy_handler() in
}
if (status & PORT_IRQ_FATAL) {
- ahci_intr_error(ap, status);
+ unsigned int err_mask;
+ if (status & PORT_IRQ_TF_ERR)
+ err_mask = AC_ERR_DEV;
+ else if (status & PORT_IRQ_IF_ERR)
+ err_mask = AC_ERR_ATA_BUS;
+ else
+ err_mask = AC_ERR_HOST_BUS;
+
+ /* command processing has stopped due to error; restart */
+ ahci_restart_port(ap, status);
+
if (qc)
- ata_qc_complete(qc, AC_ERR_OTHER);
+ ata_qc_complete(qc, err_mask);
}
return 1;
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "1.04"
+#define DRV_VERSION "1.05"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
return modes;
}
+static int ata_qc_wait_err(struct ata_queued_cmd *qc,
+ struct completion *wait)
+{
+ int rc = 0;
+
+ if (wait_for_completion_timeout(wait, 30 * HZ) < 1) {
+ /* timeout handling */
+ unsigned int err_mask = ac_err_mask(ata_chk_status(qc->ap));
+
+ if (!err_mask) {
+ printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ } else {
+ printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ rc = -EIO;
+ }
+
+ ata_qc_complete(qc, err_mask);
+ }
+
+ return rc;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
if (rc)
goto err_out;
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->ops->tf_read(ap, &qc->tf);
}
/* ATAPI-specific feature tests */
- else {
+ else if (dev->class == ATA_DEV_ATAPI) {
if (ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
/*
* Find the mode.
- */
+ */
if (!(s = ata_timing_find_mode(speed)))
return -EINVAL;
+ memcpy(t, s, sizeof(*s));
+
/*
* If the drive is an EIDE drive, it can tell us it needs extended
* PIO/MW_DMA cycle timing.
* Convert the timing to bus clock counts.
*/
- ata_timing_quantize(s, t, T, UT);
+ ata_timing_quantize(t, t, T, UT);
/*
* Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
if (rc)
ata_port_disable(ap);
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
DPRINTK("EXIT\n");
}
if (rc)
goto err_out;
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
swap_buf_le16(dev->id, ATA_ID_WORDS);
if (rc)
ata_port_disable(ap);
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
DPRINTK("EXIT\n");
}
if (qc->flags & ATA_QCFLAG_SINGLE)
assert(qc->n_elem == 1);
- DPRINTK("unmapping %u sg elements\n", qc->n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
/* if we padded the buffer out to 32-bit bound, and data
* xfer direction is from-device, we must copy from the
pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
if (qc->flags & ATA_QCFLAG_SG) {
- dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ if (qc->n_elem)
+ dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
/* restore last sg */
sg[qc->orig_n_elem - 1].length += qc->pad_len;
if (pad_buf) {
kunmap_atomic(psg->page, KM_IRQ0);
}
} else {
- dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]),
- sg_dma_len(&sg[0]), dir);
+ if (sg_dma_len(&sg[0]) > 0)
+ dma_unmap_single(ap->host_set->dev,
+ sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
+ dir);
/* restore sg */
sg->length += qc->pad_len;
if (pad_buf)
sg->length, qc->pad_len);
}
+ if (!sg->length) {
+ sg_dma_address(sg) = 0;
+ goto skip_map;
+ }
+
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
sg->length, dir);
if (dma_mapping_error(dma_address)) {
}
sg_dma_address(sg) = dma_address;
+skip_map:
sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->__sg;
struct scatterlist *lsg = &sg[qc->n_elem - 1];
- int n_elem, dir;
+ int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->id);
assert(qc->flags & ATA_QCFLAG_SG);
sg_dma_len(psg) = ATA_DMA_PAD_SZ;
/* trim last sg */
lsg->length -= qc->pad_len;
+ if (lsg->length == 0)
+ trim_sg = 1;
DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
qc->n_elem - 1, lsg->length, qc->pad_len);
}
+ pre_n_elem = qc->n_elem;
+ if (trim_sg && pre_n_elem)
+ pre_n_elem--;
+
+ if (!pre_n_elem) {
+ n_elem = 0;
+ goto skip_map;
+ }
+
dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
if (n_elem < 1) {
/* restore last sg */
lsg->length += qc->pad_len;
DPRINTK("%d sg elements mapped\n", n_elem);
+skip_map:
qc->n_elem = n_elem;
return 0;
{
struct ata_port *ap = qc->ap;
struct ata_host_set *host_set = ap->host_set;
- struct ata_device *dev = qc->dev;
u8 host_stat = 0, drv_stat;
unsigned long flags;
DPRINTK("ENTER\n");
- /* FIXME: doesn't this conflict with timeout handling? */
- if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
- struct scsi_cmnd *cmd = qc->scsicmd;
-
- if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
-
- /* finish completing original command */
- spin_lock_irqsave(&host_set->lock, flags);
- __ata_qc_complete(qc);
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- atapi_request_sense(ap, dev, cmd);
-
- cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
- scsi_finish_command(cmd);
-
- goto out;
- }
- }
-
spin_lock_irqsave(&host_set->lock, flags);
/* hack alert! We cannot use the supplied completion
spin_unlock_irqrestore(&host_set->lock, flags);
-out:
DPRINTK("EXIT\n");
}
qc = ata_qc_new(ap);
if (qc) {
- qc->__sg = NULL;
- qc->flags = 0;
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
- qc->cursect = qc->cursg = qc->cursg_ofs = 0;
- qc->nsect = 0;
- qc->nbytes = qc->curbytes = 0;
- ata_tf_init(ap, &qc->tf, dev->devno);
+ ata_qc_reinit(qc);
}
return qc;
done(cmd);
}
-void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd)
+static int atapi_sense_complete(struct ata_queued_cmd *qc,unsigned int err_mask)
{
- DECLARE_COMPLETION(wait);
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int rc;
+ if (err_mask && ((err_mask & AC_ERR_DEV) == 0))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
- DPRINTK("ATAPI request sense\n");
+ qc->scsidone(qc->scsicmd);
+ return 0;
+}
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
+/* is it pointless to prefer PIO for "safety reasons"? */
+static inline int ata_pio_use_silly(struct ata_port *ap)
+{
+ return (ap->flags & ATA_FLAG_PIO_DMA);
+}
+
+static void atapi_request_sense(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ DPRINTK("ATAPI request sense\n");
/* FIXME: is this needed? */
memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ ap->ops->tf_read(ap, &qc->tf);
+
+ /* fill these in, for the case where they are -not- overwritten */
+ cmd->sense_buffer[0] = 0x70;
+ cmd->sense_buffer[2] = qc->tf.feature >> 4;
+
+ ata_qc_reinit(qc);
+
ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
qc->dma_dir = DMA_FROM_DEVICE;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
qc->tf.command = ATA_CMD_PACKET;
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
+ if (ata_pio_use_silly(ap)) {
+ qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.feature |= ATAPI_PKT_DMA;
+ } else {
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ }
qc->nbytes = SCSI_SENSE_BUFFERSIZE;
- qc->waiting = &wait;
- qc->complete_fn = ata_qc_complete_noop;
+ qc->complete_fn = atapi_sense_complete;
- spin_lock_irqsave(&ap->host_set->lock, flags);
- rc = ata_qc_issue(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- if (rc)
- ata_port_disable(ap);
- else
- wait_for_completion(&wait);
+ if (ata_qc_issue(qc))
+ ata_qc_complete(qc, AC_ERR_OTHER);
DPRINTK("EXIT\n");
}
VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
if (unlikely(err_mask & AC_ERR_DEV)) {
- DPRINTK("request check condition\n");
-
- /* FIXME: command completion with check condition
- * but no sense causes the error handler to run,
- * which then issues REQUEST SENSE, fills in the sense
- * buffer, and completes the command (for the second
- * time). We need to issue REQUEST SENSE some other
- * way, to avoid completing the command twice.
- */
cmd->result = SAM_STAT_CHECK_CONDITION;
-
- qc->scsidone(cmd);
-
+ atapi_request_sense(qc);
return 1;
}
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.12" /* must be exactly four chars */
+#define DRV_VERSION "1.20" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
/* libata-scsi.c */
-extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd);
extern void ata_scsi_scan_host(struct ata_port *ap);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
/*
* sata_mv.c - Marvell SATA support
*
- * Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005: EMC Corporation, all rights reserved.
*
* Please ALWAYS copy linux-ide@vger.kernel.org on emails.
*
MV_PCI_REG_BASE = 0,
MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
MV_SATAHC0_REG_BASE = 0x20000,
+ MV_FLASH_CTL = 0x1046c,
+ MV_GPIO_PORT_CTL = 0x104f0,
+ MV_RESET_CFG = 0x180d8,
MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
- /* Our DMA boundary is determined by an ePRD being unable to handle
- * anything larger than 64KB
- */
- MV_DMA_BOUNDARY = 0xffffU,
-
MV_PORTS_PER_HC = 4,
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
MV_PORT_HC_SHIFT = 2,
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */
MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
- MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE |
- MV_FLAG_GLBL_SFT_RST),
-
- chip_504x = 0,
- chip_508x = 1,
- chip_604x = 2,
- chip_608x = 3,
+ MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
PCI_MASTER_EMPTY = (1 << 3),
GLOB_SFT_RST = (1 << 4),
- PCI_IRQ_CAUSE_OFS = 0x1d58,
- PCI_IRQ_MASK_OFS = 0x1d5c,
+ MV_PCI_MODE = 0xd00,
+ MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
+ MV_PCI_DISC_TIMER = 0xd04,
+ MV_PCI_MSI_TRIGGER = 0xc38,
+ MV_PCI_SERR_MASK = 0xc28,
+ MV_PCI_XBAR_TMOUT = 0x1d04,
+ MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
+ MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
+ MV_PCI_ERR_ATTRIBUTE = 0x1d48,
+ MV_PCI_ERR_COMMAND = 0x1d50,
+
+ PCI_IRQ_CAUSE_OFS = 0x1d58,
+ PCI_IRQ_MASK_OFS = 0x1d5c,
PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
SELF_INT = (1 << 23),
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
- HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
+ HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
HC_MAIN_RSVD),
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
+ PHY_MODE3 = 0x310,
+ PHY_MODE4 = 0x314,
+ PHY_MODE2 = 0x330,
+ MV5_PHY_MODE = 0x74,
+ MV5_LT_MODE = 0x30,
+ MV5_PHY_CTL = 0x0C,
+ SATA_INTERFACE_CTL = 0x050,
+
+ MV_M2_PREAMP_MASK = 0x7e0,
/* Port registers */
EDMA_CFG_OFS = 0,
EDMA_ERR_LNK_CTRL_TX = (0x1f << 21),
EDMA_ERR_LNK_DATA_TX = (0x1f << 26),
EDMA_ERR_TRANS_PROTO = (1 << 31),
- EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+ EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
- EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
+ EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
EDMA_ERR_LNK_DATA_RX |
- EDMA_ERR_LNK_DATA_TX |
+ EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO),
EDMA_REQ_Q_BASE_HI_OFS = 0x10,
EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
- EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
EDMA_REQ_Q_PTR_SHIFT = 5,
EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
EDMA_RSP_Q_IN_PTR_OFS = 0x20,
EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
- EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
EDMA_RSP_Q_PTR_SHIFT = 3,
EDMA_CMD_OFS = 0x28,
EDMA_DS = (1 << 1),
ATA_RST = (1 << 2),
+ EDMA_IORDY_TMOUT = 0x34,
+ EDMA_ARB_CFG = 0x38,
+
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
+ MV_HP_ERRATA_50XXB0 = (1 << 1),
+ MV_HP_ERRATA_50XXB2 = (1 << 2),
+ MV_HP_ERRATA_60X1B2 = (1 << 3),
+ MV_HP_ERRATA_60X1C0 = (1 << 4),
+ MV_HP_50XX = (1 << 5),
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0),
MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
};
+#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
+#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
+
+enum {
+ /* Our DMA boundary is determined by an ePRD being unable to handle
+ * anything larger than 64KB
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
+
+ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+};
+
+enum chip_type {
+ chip_504x,
+ chip_508x,
+ chip_5080,
+ chip_604x,
+ chip_608x,
+};
+
/* Command ReQuest Block: 32B */
struct mv_crqb {
u32 sg_addr;
u32 pp_flags;
};
+struct mv_port_signal {
+ u32 amps;
+ u32 pre;
+};
+
+struct mv_host_priv;
+struct mv_hw_ops {
+ void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+ void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
+ void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+ int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+ void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
+ void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
+};
+
struct mv_host_priv {
u32 hp_flags;
+ struct mv_port_signal signal[8];
+ const struct mv_hw_ops *ops;
};
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
+static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
+static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static void mv_phy_reset(struct ata_port *ap);
+static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
static void mv_host_stop(struct ata_host_set *host_set);
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
+
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
+static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no);
+static void mv_stop_and_reset(struct ata_port *ap);
+
static struct scsi_host_template mv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.eh_strategy_handler = ata_scsi_error,
.can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_MAX_SG_CT,
+ .sg_tablesize = MV_MAX_SG_CT / 2,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.ordered_flush = 1,
};
-static const struct ata_port_operations mv_ops = {
+static const struct ata_port_operations mv5_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .phy_reset = mv_phy_reset,
+
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
+
+ .eng_timeout = mv_eng_timeout,
+
+ .irq_handler = mv_interrupt,
+ .irq_clear = mv_irq_clear,
+
+ .scr_read = mv5_scr_read,
+ .scr_write = mv5_scr_write,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
+};
+
+static const struct ata_port_operations mv6_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.sht = &mv_sht,
.host_flags = MV_COMMON_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
- .port_ops = &mv_ops,
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv5_ops,
},
{ /* chip_508x */
.sht = &mv_sht,
.host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
- .port_ops = &mv_ops,
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv5_ops,
+ },
+ { /* chip_5080 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv5_ops,
},
{ /* chip_604x */
.sht = &mv_sht,
.host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
- .port_ops = &mv_ops,
+ .port_ops = &mv6_ops,
},
{ /* chip_608x */
.sht = &mv_sht,
- .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
MV_FLAG_DUAL_HC),
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
- .port_ops = &mv_ops,
+ .port_ops = &mv6_ops,
},
};
static const struct pci_device_id mv_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x},
- {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x},
+ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
.remove = ata_pci_remove_one,
};
+static const struct mv_hw_ops mv5xxx_ops = {
+ .phy_errata = mv5_phy_errata,
+ .enable_leds = mv5_enable_leds,
+ .read_preamp = mv5_read_preamp,
+ .reset_hc = mv5_reset_hc,
+ .reset_flash = mv5_reset_flash,
+ .reset_bus = mv5_reset_bus,
+};
+
+static const struct mv_hw_ops mv6xxx_ops = {
+ .phy_errata = mv6_phy_errata,
+ .enable_leds = mv6_enable_leds,
+ .read_preamp = mv6_read_preamp,
+ .reset_hc = mv6_reset_hc,
+ .reset_flash = mv6_reset_flash,
+ .reset_bus = mv_reset_pci_bus,
+};
+
/*
* Functions
*/
return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
}
+static inline unsigned int mv_hc_from_port(unsigned int port)
+{
+ return port >> MV_PORT_HC_SHIFT;
+}
+
+static inline unsigned int mv_hardport_from_port(unsigned int port)
+{
+ return port & MV_PORT_MASK;
+}
+
+static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
+ unsigned int port)
+{
+ return mv_hc_base(base, mv_hc_from_port(port));
+}
+
static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
{
- return (mv_hc_base(base, port >> MV_PORT_HC_SHIFT) +
- MV_SATAHC_ARBTR_REG_SZ +
- ((port & MV_PORT_MASK) * MV_PORT_REG_SZ));
+ return mv_hc_base_from_port(base, port) +
+ MV_SATAHC_ARBTR_REG_SZ +
+ (mv_hardport_from_port(port) * MV_PORT_REG_SZ);
}
static inline void __iomem *mv_ap_base(struct ata_port *ap)
return mv_port_base(ap->host_set->mmio_base, ap->port_no);
}
-static inline int mv_get_hc_count(unsigned long hp_flags)
+static inline int mv_get_hc_count(unsigned long host_flags)
{
- return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
+ return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
static void mv_irq_clear(struct ata_port *ap)
} else {
assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
}
-
+
/* now properly wait for the eDMA to stop */
for (i = 1000; i > 0; i--) {
reg = readl(port_mmio + EDMA_CMD_OFS);
struct pci_dev *pdev)
{
#ifdef ATA_DEBUG
- void __iomem *hc_base = mv_hc_base(mmio_base,
+ void __iomem *hc_base = mv_hc_base(mmio_base,
port >> MV_PORT_HC_SHIFT);
void __iomem *port_base;
int start_port, num_ports, p, start_hc, num_hcs, hc;
start_port = port;
num_ports = num_hcs = 1;
}
- DPRINTK("All registers for port(s) %u-%u:\n", start_port,
+ DPRINTK("All registers for port(s) %u-%u:\n", start_port,
num_ports > 1 ? num_ports - 1 : start_port);
if (NULL != pdev) {
}
/**
- * mv_global_soft_reset - Perform the 6xxx global soft reset
- * @mmio_base: base address of the HBA
- *
- * This routine only applies to 6xxx parts.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static int mv_global_soft_reset(void __iomem *mmio_base)
-{
- void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS;
- int i, rc = 0;
- u32 t;
-
- /* Following procedure defined in PCI "main command and status
- * register" table.
- */
- t = readl(reg);
- writel(t | STOP_PCI_MASTER, reg);
-
- for (i = 0; i < 1000; i++) {
- udelay(1);
- t = readl(reg);
- if (PCI_MASTER_EMPTY & t) {
- break;
- }
- }
- if (!(PCI_MASTER_EMPTY & t)) {
- printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
- rc = 1;
- goto done;
- }
-
- /* set reset */
- i = 5;
- do {
- writel(t | GLOB_SFT_RST, reg);
- t = readl(reg);
- udelay(1);
- } while (!(GLOB_SFT_RST & t) && (i-- > 0));
-
- if (!(GLOB_SFT_RST & t)) {
- printk(KERN_ERR DRV_NAME ": can't set global reset\n");
- rc = 1;
- goto done;
- }
-
- /* clear reset and *reenable the PCI master* (not mentioned in spec) */
- i = 5;
- do {
- writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
- t = readl(reg);
- udelay(1);
- } while ((GLOB_SFT_RST & t) && (i-- > 0));
-
- if (GLOB_SFT_RST & t) {
- printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
- rc = 1;
- }
-done:
- return rc;
-}
-
-/**
* mv_host_stop - Host specific cleanup/stop routine.
* @host_set: host data structure
*
goto err_out;
memset(pp, 0, sizeof(*pp));
- mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
+ mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
goto err_out_pp;
if (rc)
goto err_out_priv;
- /* First item in chunk of DMA memory:
+ /* First item in chunk of DMA memory:
* 32-slot command request table (CRQB), 32 bytes each in size
*/
pp->crqb = mem;
mem += MV_CRQB_Q_SZ;
mem_dma += MV_CRQB_Q_SZ;
- /* Second item:
+ /* Second item:
* 32-slot command response table (CRPB), 8 bytes each in size
*/
pp->crpb = mem;
pp->sg_tbl = mem;
pp->sg_tbl_dma = mem_dma;
- writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
+ writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
- writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
+ writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
- writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
+ writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
pp->req_producer = pp->rsp_consumer = 0;
struct scatterlist *sg;
ata_for_each_sg(sg, qc) {
- u32 sg_len;
dma_addr_t addr;
+ u32 sg_len, len, offset;
addr = sg_dma_address(sg);
sg_len = sg_dma_len(sg);
- pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
- pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- assert(0 == (sg_len & ~MV_DMA_BOUNDARY));
- pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len);
- if (ata_sg_is_last(sg, qc))
- pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ while (sg_len) {
+ offset = addr & MV_DMA_BOUNDARY;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
+ pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ pp->sg_tbl[i].flags_size = cpu_to_le32(len);
+
+ sg_len -= len;
+ addr += len;
+
+ if (!sg_len && ata_sg_is_last(sg, qc))
+ pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
- i++;
+ i++;
+ }
}
}
}
/* the req producer index should be the same as we remember it */
- assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
pp->req_producer);
assert(MV_MAX_Q_DEPTH > qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- pp->crqb[pp->req_producer].sg_addr =
+ pp->crqb[pp->req_producer].sg_addr =
cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- pp->crqb[pp->req_producer].sg_addr_hi =
+ pp->crqb[pp->req_producer].sg_addr_hi =
cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
case ATA_CMD_FPDMA_READ:
case ATA_CMD_FPDMA_WRITE:
- mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
break;
#endif /* FIXME: remove this line when NCQ added */
pp->req_producer);
/* until we do queuing, the queue should be empty at this point */
assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
mv_inc_q_index(&pp->req_producer); /* now incr producer index */
out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
/* the response consumer index should be the same as we remember it */
- assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
pp->rsp_consumer);
/* increment our consumer index... */
pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
-
+
/* and, until we do NCQ, there should only be 1 CRPB waiting */
- assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
- EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
pp->rsp_consumer);
/* write out our inc'd consumer index so EDMA knows we're caught up */
/* check for fatal here and recover if needed */
if (EDMA_ERR_FATAL & edma_err_cause) {
- mv_phy_reset(ap);
+ mv_stop_and_reset(ap);
}
}
handled++;
}
+ if (ap &&
+ (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
+ continue;
+
err_mask = ac_err_mask(ata_status);
shift = port << 1; /* (port * 2) */
err_mask |= AC_ERR_OTHER;
handled++;
}
-
+
if (handled && ap) {
qc = ata_qc_from_tag(ap, ap->active_tag);
if (NULL != qc) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
- ata_qc_complete(qc, err_mask);
+ if (!(qc->tf.ctl & ATA_NIEN))
+ ata_qc_complete(qc, err_mask);
}
}
}
}
/**
- * mv_interrupt -
+ * mv_interrupt -
* @irq: unused
* @dev_instance: private data; in this case the host structure
* @regs: unused
* routine to handle. Also check for PCI errors which are only
* reported here.
*
- * LOCKING:
+ * LOCKING:
* This routine holds the host_set lock while processing pending
* interrupts.
*/
return IRQ_RETVAL(handled);
}
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
+}
+
+static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
+{
+ unsigned int ofs;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ case SCR_ERROR:
+ case SCR_CONTROL:
+ ofs = sc_reg_in * sizeof(u32);
+ break;
+ default:
+ ofs = 0xffffffffU;
+ break;
+ }
+ return ofs;
+}
+
+static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
+{
+ void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no);
+ unsigned int ofs = mv5_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU)
+ return readl(mmio + ofs);
+ else
+ return (u32) ofs;
+}
+
+static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+{
+ void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no);
+ unsigned int ofs = mv5_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU)
+ writelfl(val, mmio + ofs);
+}
+
+static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
+{
+ u8 rev_id;
+ int early_5080;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+
+ early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+
+ if (!early_5080) {
+ u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ tmp |= (1 << 0);
+ writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ }
+
+ mv_reset_pci_bus(pdev, mmio);
+}
+
+static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ writel(0x0fcfffff, mmio + MV_FLASH_CTL);
+}
+
+static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
+ u32 tmp;
+
+ tmp = readl(phy_mmio + MV5_PHY_MODE);
+
+ hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
+ hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
+}
+
+static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ u32 tmp;
+
+ writel(0, mmio + MV_GPIO_PORT_CTL);
+
+ /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
+
+ tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ tmp |= ~(1 << 0);
+ writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
+}
+
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *phy_mmio = mv5_phy_base(mmio, port);
+ const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
+ u32 tmp;
+ int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
+
+ if (fix_apm_sq) {
+ tmp = readl(phy_mmio + MV5_LT_MODE);
+ tmp |= (1 << 19);
+ writel(tmp, phy_mmio + MV5_LT_MODE);
+
+ tmp = readl(phy_mmio + MV5_PHY_CTL);
+ tmp &= ~0x3;
+ tmp |= 0x1;
+ writel(tmp, phy_mmio + MV5_PHY_CTL);
+ }
+
+ tmp = readl(phy_mmio + MV5_PHY_MODE);
+ tmp &= ~mask;
+ tmp |= hpriv->signal[port].pre;
+ tmp |= hpriv->signal[port].amps;
+ writel(tmp, phy_mmio + MV5_PHY_MODE);
+}
+
+
+#undef ZERO
+#define ZERO(reg) writel(0, port_mmio + (reg))
+static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
+
+ mv_channel_reset(hpriv, mmio, port);
+
+ ZERO(0x028); /* command */
+ writel(0x11f, port_mmio + EDMA_CFG_OFS);
+ ZERO(0x004); /* timer */
+ ZERO(0x008); /* irq err cause */
+ ZERO(0x00c); /* irq err mask */
+ ZERO(0x010); /* rq bah */
+ ZERO(0x014); /* rq inp */
+ ZERO(0x018); /* rq outp */
+ ZERO(0x01c); /* respq bah */
+ ZERO(0x024); /* respq outp */
+ ZERO(0x020); /* respq inp */
+ ZERO(0x02c); /* test control */
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+}
+#undef ZERO
+
+#define ZERO(reg) writel(0, hc_mmio + (reg))
+static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int hc)
+{
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+ u32 tmp;
+
+ ZERO(0x00c);
+ ZERO(0x010);
+ ZERO(0x014);
+ ZERO(0x018);
+
+ tmp = readl(hc_mmio + 0x20);
+ tmp &= 0x1c1c1c1c;
+ tmp |= 0x03030303;
+ writel(tmp, hc_mmio + 0x20);
+}
+#undef ZERO
+
+static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc)
+{
+ unsigned int hc, port;
+
+ for (hc = 0; hc < n_hc; hc++) {
+ for (port = 0; port < MV_PORTS_PER_HC; port++)
+ mv5_reset_hc_port(hpriv, mmio,
+ (hc * MV_PORTS_PER_HC) + port);
+
+ mv5_reset_one_hc(hpriv, mmio, hc);
+ }
+
+ return 0;
+}
+
+#undef ZERO
+#define ZERO(reg) writel(0, mmio + (reg))
+static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
+{
+ u32 tmp;
+
+ tmp = readl(mmio + MV_PCI_MODE);
+ tmp &= 0xff00ffff;
+ writel(tmp, mmio + MV_PCI_MODE);
+
+ ZERO(MV_PCI_DISC_TIMER);
+ ZERO(MV_PCI_MSI_TRIGGER);
+ writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
+ ZERO(HC_MAIN_IRQ_MASK_OFS);
+ ZERO(MV_PCI_SERR_MASK);
+ ZERO(PCI_IRQ_CAUSE_OFS);
+ ZERO(PCI_IRQ_MASK_OFS);
+ ZERO(MV_PCI_ERR_LOW_ADDRESS);
+ ZERO(MV_PCI_ERR_HIGH_ADDRESS);
+ ZERO(MV_PCI_ERR_ATTRIBUTE);
+ ZERO(MV_PCI_ERR_COMMAND);
+}
+#undef ZERO
+
+static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ u32 tmp;
+
+ mv5_reset_flash(hpriv, mmio);
+
+ tmp = readl(mmio + MV_GPIO_PORT_CTL);
+ tmp &= 0x3;
+ tmp |= (1 << 5) | (1 << 6);
+ writel(tmp, mmio + MV_GPIO_PORT_CTL);
+}
+
+/**
+ * mv6_reset_hc - Perform the 6xxx global soft reset
+ * @mmio: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc)
+{
+ void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
+ int i, rc = 0;
+ u32 t;
+
+ /* Following procedure defined in PCI "main command and status
+ * register" table.
+ */
+ t = readl(reg);
+ writel(t | STOP_PCI_MASTER, reg);
+
+ for (i = 0; i < 1000; i++) {
+ udelay(1);
+ t = readl(reg);
+ if (PCI_MASTER_EMPTY & t) {
+ break;
+ }
+ }
+ if (!(PCI_MASTER_EMPTY & t)) {
+ printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
+ rc = 1;
+ goto done;
+ }
+
+ /* set reset */
+ i = 5;
+ do {
+ writel(t | GLOB_SFT_RST, reg);
+ t = readl(reg);
+ udelay(1);
+ } while (!(GLOB_SFT_RST & t) && (i-- > 0));
+
+ if (!(GLOB_SFT_RST & t)) {
+ printk(KERN_ERR DRV_NAME ": can't set global reset\n");
+ rc = 1;
+ goto done;
+ }
+
+ /* clear reset and *reenable the PCI master* (not mentioned in spec) */
+ i = 5;
+ do {
+ writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
+ t = readl(reg);
+ udelay(1);
+ } while ((GLOB_SFT_RST & t) && (i-- > 0));
+
+ if (GLOB_SFT_RST & t) {
+ printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
+ rc = 1;
+ }
+done:
+ return rc;
+}
+
+static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *port_mmio;
+ u32 tmp;
+
+ tmp = readl(mmio + MV_RESET_CFG);
+ if ((tmp & (1 << 0)) == 0) {
+ hpriv->signal[idx].amps = 0x7 << 8;
+ hpriv->signal[idx].pre = 0x1 << 5;
+ return;
+ }
+
+ port_mmio = mv_port_base(mmio, idx);
+ tmp = readl(port_mmio + PHY_MODE2);
+
+ hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
+ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
+}
+
+static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
+}
+
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ u32 hp_flags = hpriv->hp_flags;
+ int fix_phy_mode2 =
+ hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
+ int fix_phy_mode4 =
+ hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
+ u32 m2, tmp;
+
+ if (fix_phy_mode2) {
+ m2 = readl(port_mmio + PHY_MODE2);
+ m2 &= ~(1 << 16);
+ m2 |= (1 << 31);
+ writel(m2, port_mmio + PHY_MODE2);
+
+ udelay(200);
+
+ m2 = readl(port_mmio + PHY_MODE2);
+ m2 &= ~((1 << 16) | (1 << 31));
+ writel(m2, port_mmio + PHY_MODE2);
+
+ udelay(200);
+ }
+
+ /* who knows what this magic does */
+ tmp = readl(port_mmio + PHY_MODE3);
+ tmp &= ~0x7F800000;
+ tmp |= 0x2A800000;
+ writel(tmp, port_mmio + PHY_MODE3);
+
+ if (fix_phy_mode4) {
+ u32 m4;
+
+ m4 = readl(port_mmio + PHY_MODE4);
+
+ if (hp_flags & MV_HP_ERRATA_60X1B2)
+ tmp = readl(port_mmio + 0x310);
+
+ m4 = (m4 & ~(1 << 1)) | (1 << 0);
+
+ writel(m4, port_mmio + PHY_MODE4);
+
+ if (hp_flags & MV_HP_ERRATA_60X1B2)
+ writel(tmp, port_mmio + 0x310);
+ }
+
+ /* Revert values of pre-emphasis and signal amps to the saved ones */
+ m2 = readl(port_mmio + PHY_MODE2);
+
+ m2 &= ~MV_M2_PREAMP_MASK;
+ m2 |= hpriv->signal[port].amps;
+ m2 |= hpriv->signal[port].pre;
+ m2 &= ~(1 << 16);
+
+ writel(m2, port_mmio + PHY_MODE2);
+}
+
+static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port_no);
+
+ writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+
+ if (IS_60XX(hpriv)) {
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+ ifctl |= (1 << 12) | (1 << 7);
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ }
+
+ udelay(25); /* allow reset propagation */
+
+ /* Spec never mentions clearing the bit. Marvell's driver does
+ * clear the bit, however.
+ */
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
+
+ hpriv->ops->phy_errata(hpriv, mmio, port_no);
+
+ if (IS_50XX(hpriv))
+ mdelay(1);
+}
+
+static void mv_stop_and_reset(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host_set->private_data;
+ void __iomem *mmio = ap->host_set->mmio_base;
+
+ mv_stop_dma(ap);
+
+ mv_channel_reset(hpriv, mmio, ap->port_no);
+
+ __mv_phy_reset(ap, 0);
+}
+
+static inline void __msleep(unsigned int msec, int can_sleep)
+{
+ if (can_sleep)
+ msleep(msec);
+ else
+ mdelay(msec);
+}
+
/**
- * mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * __mv_phy_reset - Perform eDMA reset followed by COMRESET
* @ap: ATA channel to manipulate
*
* Part of this is taken from __sata_phy_reset and modified to
* Inherited from caller. This is coded to safe to call at
* interrupt level, i.e. it does not sleep.
*/
-static void mv_phy_reset(struct ata_port *ap)
+static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
{
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host_set->private_data;
void __iomem *port_mmio = mv_ap_base(ap);
struct ata_taskfile tf;
struct ata_device *dev = &ap->device[0];
unsigned long timeout;
+ int retry = 5;
+ u32 sstatus;
VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
- mv_stop_dma(ap);
-
- writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
- udelay(25); /* allow reset propagation */
-
- /* Spec never mentions clearing the bit. Marvell's driver does
- * clear the bit, however.
- */
- writelfl(0, port_mmio + EDMA_CMD_OFS);
-
- VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
+ DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
- /* proceed to init communications via the scr_control reg */
+ /* Issue COMRESET via SControl */
+comreset_retry:
scr_write_flush(ap, SCR_CONTROL, 0x301);
- mdelay(1);
+ __msleep(1, can_sleep);
+
scr_write_flush(ap, SCR_CONTROL, 0x300);
- timeout = jiffies + (HZ * 1);
+ __msleep(20, can_sleep);
+
+ timeout = jiffies + msecs_to_jiffies(200);
do {
- mdelay(10);
- if ((scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ sstatus = scr_read(ap, SCR_STATUS) & 0x3;
+ if ((sstatus == 3) || (sstatus == 0))
break;
+
+ __msleep(1, can_sleep);
} while (time_before(jiffies, timeout));
- VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
+ /* work around errata */
+ if (IS_60XX(hpriv) &&
+ (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
+ (retry-- > 0))
+ goto comreset_retry;
+
+ DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
}
ap->cbl = ATA_CBL_SATA;
+ /* even after SStatus reflects that device is ready,
+ * it seems to take a while for link to be fully
+ * established (and thus Status no longer 0x80/0x7F),
+ * so we poll a bit for that, here.
+ */
+ retry = 20;
+ while (1) {
+ u8 drv_stat = ata_check_status(ap);
+ if ((drv_stat != 0x80) && (drv_stat != 0x7f))
+ break;
+ __msleep(500, can_sleep);
+ if (retry-- <= 0)
+ break;
+ }
+
tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr);
tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr);
tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr);
VPRINTK("Port disabled post-sig: No device present.\n");
ata_port_disable(ap);
}
+
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+
VPRINTK("EXIT\n");
}
+static void mv_phy_reset(struct ata_port *ap)
+{
+ __mv_phy_reset(ap, 1);
+}
+
/**
* mv_eng_timeout - Routine called by libata when SCSI times out I/O
* @ap: ATA channel to manipulate
printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
DPRINTK("All regs @ start of eng_timeout\n");
- mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
+ mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
to_pci_dev(ap->host_set->dev));
qc = ata_qc_from_tag(ap, ap->active_tag);
printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
- ap->host_set->mmio_base, ap, qc, qc->scsicmd,
+ ap->host_set->mmio_base, ap, qc, qc->scsicmd,
&qc->scsicmd->cmnd);
mv_err_intr(ap);
- mv_phy_reset(ap);
+ mv_stop_and_reset(ap);
if (!qc) {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
unsigned serr_ofs;
- /* PIO related setup
+ /* PIO related setup
*/
port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
- port->error_addr =
+ port->error_addr =
port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
- port->status_addr =
+ port->status_addr =
port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
/* special case: control/altstatus doesn't have ATA_REG_ address */
port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
/* unmask all EDMA error interrupts */
writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
- VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
+ VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
readl(port_mmio + EDMA_CFG_OFS),
readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
+ unsigned int board_idx)
+{
+ u8 rev_id;
+ u32 hp_flags = hpriv->hp_flags;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+
+ switch(board_idx) {
+ case chip_5080:
+ hpriv->ops = &mv5xxx_ops;
+ hp_flags |= MV_HP_50XX;
+
+ switch (rev_id) {
+ case 0x1:
+ hp_flags |= MV_HP_ERRATA_50XXB0;
+ break;
+ case 0x3:
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying 50XXB2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ }
+ break;
+
+ case chip_504x:
+ case chip_508x:
+ hpriv->ops = &mv5xxx_ops;
+ hp_flags |= MV_HP_50XX;
+
+ switch (rev_id) {
+ case 0x0:
+ hp_flags |= MV_HP_ERRATA_50XXB0;
+ break;
+ case 0x3:
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying B2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ }
+ break;
+
+ case chip_604x:
+ case chip_608x:
+ hpriv->ops = &mv6xxx_ops;
+
+ switch (rev_id) {
+ case 0x7:
+ hp_flags |= MV_HP_ERRATA_60X1B2;
+ break;
+ case 0x9:
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying B2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1B2;
+ break;
+ }
+ break;
+
+ default:
+ printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
+ return 1;
+ }
+
+ hpriv->hp_flags = hp_flags;
+
+ return 0;
+}
+
/**
- * mv_host_init - Perform some early initialization of the host.
+ * mv_init_host - Perform some early initialization of the host.
+ * @pdev: host PCI device
* @probe_ent: early data struct representing the host
*
* If possible, do an early global reset of the host. Then do
* LOCKING:
* Inherited from caller.
*/
-static int mv_host_init(struct ata_probe_ent *probe_ent)
+static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
+ unsigned int board_idx)
{
int rc = 0, n_hc, port, hc;
void __iomem *mmio = probe_ent->mmio_base;
- void __iomem *port_mmio;
+ struct mv_host_priv *hpriv = probe_ent->private_data;
- if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) &&
- mv_global_soft_reset(probe_ent->mmio_base)) {
- rc = 1;
+ /* global interrupt mask */
+ writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
+
+ rc = mv_chip_id(pdev, hpriv, board_idx);
+ if (rc)
goto done;
- }
n_hc = mv_get_hc_count(probe_ent->host_flags);
probe_ent->n_ports = MV_PORTS_PER_HC * n_hc;
+ for (port = 0; port < probe_ent->n_ports; port++)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
+
+ rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
+ if (rc)
+ goto done;
+
+ hpriv->ops->reset_flash(hpriv, mmio);
+ hpriv->ops->reset_bus(pdev, mmio);
+ hpriv->ops->enable_leds(hpriv, mmio);
+
for (port = 0; port < probe_ent->n_ports; port++) {
- port_mmio = mv_port_base(mmio, port);
+ if (IS_60XX(hpriv)) {
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+ ifctl |= (1 << 12);
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ }
+
+ hpriv->ops->phy_errata(hpriv, mmio, port);
+ }
+
+ for (port = 0; port < probe_ent->n_ports; port++) {
+ void __iomem *port_mmio = mv_port_base(mmio, port);
mv_port_init(&probe_ent->port[port], port_mmio);
}
writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
- "PCI int cause/mask=0x%08x/0x%08x\n",
+ "PCI int cause/mask=0x%08x/0x%08x\n",
readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
readl(mmio + PCI_IRQ_CAUSE_OFS),
readl(mmio + PCI_IRQ_MASK_OFS));
+
done:
return rc;
}
dev_printk(KERN_INFO, &pdev->dev,
"%u slots %u ports %s mode IRQ via %s\n",
- (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+ (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
probe_ent->private_data = hpriv;
/* initialize adapter */
- rc = mv_host_init(probe_ent);
+ rc = mv_init_host(pdev, probe_ent, board_idx);
if (rc) {
goto err_out_hpriv;
}
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.02"
+#define DRV_VERSION "1.03"
enum {
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
-#define DRV_VERSION "0.04"
+#define DRV_VERSION "0.05"
enum {
QS_PORTS = 4,
PORT_CS_DEV_RST = (1 << 1), /* device reset */
PORT_CS_INIT = (1 << 2), /* port initialize */
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
PORT_CS_RESUME = (1 << 6), /* port resume */
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
+ /* bits of PRB control field */
+ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
+ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
+ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
+ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
+ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* PRB protocol field */
+ PRB_PROT_PACKET = (1 << 0),
+ PRB_PROT_TCQ = (1 << 1),
+ PRB_PROT_NCQ = (1 << 2),
+ PRB_PROT_READ = (1 << 3),
+ PRB_PROT_WRITE = (1 << 4),
+ PRB_PROT_TRANSPARENT = (1 << 5),
+
/*
* Other constants
*/
SGE_TRM = (1 << 31), /* Last SGE in chain */
- PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
+ SGE_LNK = (1 << 30), /* linked list
+ Points to SGT, not SGE */
+ SGE_DRD = (1 << 29), /* discard data read (/dev/null)
+ data address ignored */
/* board id */
BID_SIL3124 = 0,
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
-#define DRV_VERSION "1.06"
+#define DRV_VERSION "1.07"
/* Taskfile registers offsets */
#define K2_SATA_TF_CMD_OFFSET 0x00
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
enum {
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
/* Interrupt register offsets (from chip base address) */
#define VSC_SATA_INT_STAT_OFFSET 0x00
*
* DECstation changes
* Copyright (C) 1998-2000 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005 Maciej W. Rozycki
*
* For the rest of the code the original Copyright applies:
* Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/spinlock.h>
#ifdef CONFIG_SERIAL_DEC_CONSOLE
#include <linux/console.h>
#endif
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include <asm/bootinfo.h>
#include <asm/dec/interrupts.h>
#define BUS_PRESENT (DS_BUS_PRESENT)
+DEFINE_SPINLOCK(zs_lock);
+
struct dec_zschannel zs_channels[NUM_CHANNELS];
struct dec_serial zs_soft[NUM_CHANNELS];
int zs_channels_found;
0 /* write 15 */
};
-DECLARE_TASK_QUEUE(tq_zs_serial);
-
static struct tty_driver *serial_driver;
/* serial subtype definitions */
{
unsigned long flags;
-
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
if (info->zs_channel != info->zs_chan_a) {
if (set) {
info->zs_chan_a->curregs[5] |= (which & (RTS | DTR));
}
write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
/* Utility routines for the Zilog */
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
-static _INLINE_ void rs_sched_event(struct dec_serial *info,
- int event)
+static _INLINE_ void rs_sched_event(struct dec_serial *info, int event)
{
info->event |= 1 << event;
- queue_task(&info->tqueue, &tq_zs_serial);
- mark_bh(SERIAL_BH);
+ tasklet_schedule(&info->tlet);
}
static _INLINE_ void receive_chars(struct dec_serial *info,
/*
* This is the serial driver's generic interrupt routine
*/
-void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct dec_serial *info = (struct dec_serial *) dev_id;
+ irqreturn_t status = IRQ_NONE;
unsigned char zs_intreg;
int shift;
if ((zs_intreg & CHAN_IRQMASK) == 0)
break;
+ status = IRQ_HANDLED;
+
if (zs_intreg & CHBRxIP) {
receive_chars(info, regs);
}
/* Why do we need this ? */
write_zsreg(info->zs_channel, 0, RES_H_IUS);
+
+ return status;
}
#ifdef ZS_DEBUG_REGS
return;
#if 1
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
if (info->zs_channel->curregs[5] & TxENAB) {
info->zs_channel->curregs[5] &= ~TxENAB;
write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
#endif
}
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
#if 1
if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) {
info->zs_channel->curregs[5] |= TxENAB;
transmit_chars(info);
}
#endif
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
/*
* interrupt driver proper are done; the interrupt driver schedules
* them using rs_sched_event(), and they get done here.
*/
-static void do_serial_bh(void)
-{
- run_task_queue(&tq_zs_serial);
-}
-static void do_softint(void *private_)
+static void do_softint(unsigned long private_)
{
struct dec_serial *info = (struct dec_serial *) private_;
struct tty_struct *tty;
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
tty_wakeup(tty);
+ wake_up_interruptible(&tty->write_wait);
}
}
-int zs_startup(struct dec_serial * info)
+static int zs_startup(struct dec_serial * info)
{
unsigned long flags;
return -ENOMEM;
}
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
#ifdef SERIAL_DEBUG_OPEN
printk("starting up ttyS%d (irq %d)...", info->line, info->irq);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->flags |= ZILOG_INITIALIZED;
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
return 0;
}
info->irq);
#endif
- save_flags(flags); cli(); /* Disable interrupts */
+ spin_lock_irqsave(&zs_lock, flags);
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ZILOG_INITIALIZED;
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
/*
i += 15;
}
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
info->zs_baud = baud_table[i];
if (info->zs_baud) {
brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor);
/* Load up the new values */
load_zsregs(info->zs_channel, info->zs_channel->curregs);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
static void rs_flush_chars(struct tty_struct *tty)
return;
/* Enable transmitter */
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
transmit_chars(info);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
static int rs_write(struct tty_struct * tty,
if (!tty || !info->xmit_buf)
return 0;
- save_flags(flags);
while (1) {
- cli();
+ spin_lock_irqsave(&zs_lock, flags);
c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
- if (from_user) {
- down(&tmp_buf_sem);
- copy_from_user(tmp_buf, buf, c);
- c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- up(&tmp_buf_sem);
- } else
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
buf += c;
count -= c;
total += c;
if (info->xmit_cnt && !tty->stopped && !info->tx_stopped
&& !info->tx_active)
transmit_chars(info);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
return total;
}
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
- cli();
+ spin_lock_irq(&zs_lock);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- sti();
+ spin_unlock_irq(&zs_lock);
tty_wakeup(tty);
}
return;
if (I_IXOFF(tty)) {
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
info->x_char = STOP_CHAR(tty);
if (!info->tx_active)
transmit_chars(info);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
if (C_CRTSCTS(tty)) {
return;
if (I_IXOFF(tty)) {
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
if (info->x_char)
info->x_char = 0;
else {
if (!info->tx_active)
transmit_chars(info);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
if (C_CRTSCTS(tty)) {
{
unsigned char status;
- cli();
+ spin_lock(&zs_lock);
status = read_zsreg(info->zs_channel, 0);
- sti();
+ spin_unlock_irq(&zs_lock);
put_user(status,value);
return 0;
}
if (info->zs_channel == info->zs_chan_a)
result = 0;
else {
- cli();
+ spin_lock(&zs_lock);
control = info->zs_chan_a->curregs[5];
status_a = read_zsreg(info->zs_chan_a, 0);
status_b = read_zsreg(info->zs_channel, 0);
- sti();
+ spin_unlock_irq(&zs_lock);
result = ((control & RTS) ? TIOCM_RTS: 0)
| ((control & DTR) ? TIOCM_DTR: 0)
| ((status_b & DCD) ? TIOCM_CAR: 0)
unsigned int set, unsigned int clear)
{
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
- int error;
- unsigned int arg, bits;
if (info->hook)
return -ENODEV;
if (info->zs_channel == info->zs_chan_a)
return 0;
- get_user(arg, value);
- cli();
+ spin_lock(&zs_lock);
if (set & TIOCM_RTS)
info->zs_chan_a->curregs[5] |= RTS;
if (set & TIOCM_DTR)
if (clear & TIOCM_DTR)
info->zs_chan_a->curregs[5] &= ~DTR;
write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
- sti();
+ spin_unlock_irq(&zs_lock);
return 0;
}
if (!info->port)
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
if (break_state == -1)
info->zs_channel->curregs[5] |= SND_BRK;
else
info->zs_channel->curregs[5] &= ~SND_BRK;
write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
- int error;
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
if (info->hook)
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&zs_lock, flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
return;
}
info->count = 0;
}
if (info->count) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
return;
}
info->flags |= ZILOG_CLOSING;
}
info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
wake_up_interruptible(&info->close_wait);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
/*
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
-void rs_hangup(struct tty_struct *tty)
+static void rs_hangup(struct tty_struct *tty)
{
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
printk("block_til_ready before block: ttyS%d, count = %d\n",
info->line, info->count);
#endif
- cli();
+ spin_lock(&zs_lock);
if (!tty_hung_up_p(filp))
info->count--;
- sti();
+ spin_unlock_irq(&zs_lock);
info->blocked_open++;
while (1) {
- cli();
+ spin_lock(&zs_lock);
if (tty->termios->c_cflag & CBAUD)
zs_rtsdtr(info, RTS | DTR, 1);
- sti();
+ spin_unlock_irq(&zs_lock);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(info->flags & ZILOG_INITIALIZED)) {
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
-int rs_open(struct tty_struct *tty, struct file * filp)
+static int rs_open(struct tty_struct *tty, struct file * filp)
{
struct dec_serial *info;
int retval, line;
}
}
- save_and_cli(flags);
+ spin_lock_irqsave(&zs_lock, flags);
for (n = 0; n < zs_channels_found; n++) {
if (n % 2 == 0) {
write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES);
load_zsregs(zs_soft[n].zs_channel,
zs_soft[n].zs_channel->curregs);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
}
static struct tty_operations serial_ops = {
if(!BUS_PRESENT)
return -ENODEV;
- /* Setup base handler, and timer table. */
- init_bh(SERIAL_BH, do_serial_bh);
-
/* Find out how many Z8530 SCCs we have */
if (zs_chain == 0)
probe_sccs();
info->event = 0;
info->count = 0;
info->blocked_open = 0;
- info->tqueue.routine = do_softint;
- info->tqueue.data = info;
+ tasklet_init(&info->tlet, do_softint, (unsigned long)info);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n",
/*
* polling I/O routines
*/
-static int
-zs_poll_tx_char(void *handle, unsigned char ch)
+static int zs_poll_tx_char(void *handle, unsigned char ch)
{
struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
return -ENODEV;
}
-static int
-zs_poll_rx_char(void *handle)
+static int zs_poll_rx_char(void *handle)
{
struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
}
co->cflag = cflag;
- save_and_cli(flags);
+ spin_lock_irqsave(&zs_lock, flags);
/*
* Set up the baud rate generator.
zs_soft[co->index].clk_divisor = clk_divisor;
zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]);
- restore_flags(flags);
+ spin_unlock_irqrestore(&zs_lock, flags);
return 0;
}
set_debug_traps(); /* init stub */
}
#endif /* ifdef CONFIG_KGDB */
-
-
*
* Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2004 Maciej W. Rozycki
+ * Copyright (C) 2004, 2005 Maciej W. Rozycki
*/
#ifndef _DECSERIAL_H
#define _DECSERIAL_H
#include <asm/dec/serial.h>
-#define NUM_ZSREGS 16
+#define NUM_ZSREGS 16
struct serial_struct {
int type;
int xmit_head;
int xmit_tail;
int xmit_cnt;
- struct tq_struct tqueue;
- struct tq_struct tqueue_hangup;
+ struct tasklet_struct tlet;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
};
#define DLC 4 /* Disable Lower Chain */
#define MIE 8 /* Master Interrupt Enable */
#define STATHI 0x10 /* Status high */
-#define SOFTACK 0x20 /* Software Interrupt Acknowledge */
+#define SOFTACK 0x20 /* Software Interrupt Acknowledge */
#define NORESET 0 /* No reset on write to R9 */
#define CHRB 0x40 /* Reset channel B */
#define CHRA 0x80 /* Reset channel A */
/* Read Register 15 (value of WR 15) */
/* Misc macros */
-#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES))
-#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \
+#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES))
+#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \
garbage = read_zsdata(channel); \
garbage = read_zsdata(channel); \
garbage = read_zsdata(channel); \
obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o
obj-$(CONFIG_USB_ATM) += usbatm.o
obj-$(CONFIG_USB_XUSBATM) += xusbatm.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
#include <linux/config.h>
/*
-#define DEBUG
#define VERBOSE_DEBUG
*/
-#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG)
-# define DEBUG
-#endif
-
#include <asm/semaphore.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
endif
obj-$(CONFIG_USB) += usbcore.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
#include <asm/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
-
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/usb.h>
#include "hcd.h"
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#endif
-
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/init.h>
}
#ifdef CONFIG_COMPAT
-static int proc_ioctl_compat(struct dev_state *ps, void __user *arg)
+static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg)
{
struct usbdevfs_ioctl32 __user *uioc;
struct usbdevfs_ioctl ctrl;
u32 udata;
- uioc = compat_ptr(arg);
+ uioc = compat_ptr((long)arg);
if (get_user(ctrl.ifno, &uioc->ifno) ||
get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
__get_user(udata, &uioc->data))
case USBDEVFS_IOCTL32:
snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
- ret = proc_ioctl_compat(ps, p);
+ ret = proc_ioctl_compat(ps, (compat_uptr_t)(long)p);
break;
#endif
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/usb.h>
#include "usb.h"
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
static struct super_operations usbfs_ops;
static struct file_operations default_file_operations;
-static struct inode_operations usbfs_dir_inode_operations;
static struct vfsmount *usbfs_mount;
static int usbfs_mount_count; /* = 0 */
static int ignore_mount = 0;
inode->i_fop = &default_file_operations;
break;
case S_IFDIR:
- inode->i_op = &usbfs_dir_inode_operations;
+ inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
/* directory inodes start off with i_nlink == 2 (for "." entry) */
.llseek = default_file_lseek,
};
-static struct inode_operations usbfs_dir_inode_operations = {
- .lookup = simple_lookup,
-};
-
static struct super_operations usbfs_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/pci.h> /* for scatterlist macros */
#include <linux/usb.h>
#include <linux/module.h>
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
- struct usb_host_interface *alt = intf->cur_altsetting;
dev_dbg (&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
- alt->desc.bInterfaceNumber);
+ intf->cur_altsetting->desc.bInterfaceNumber);
ret = device_add (&intf->dev);
if (ret != 0) {
dev_err(&dev->dev,
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/usb.h>
-
#include "usb.h"
#include <linux/config.h>
#include <linux/kernel.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/usb.h>
-
#include "usb.h"
/* endpoint stuff */
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/init.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/usb.h>
#include "hcd.h"
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/string.h>
#include <linux/bitops.h>
set_link_state (dum);
spin_unlock_irq (&dum->lock);
- dev->power.power_state = state;
+ dev->dev.power.power_state = state;
usb_hcd_poll_rh_status (dummy_to_hcd (dum));
return 0;
}
struct usb_hcd *hcd;
int retval;
- dev_info (dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+ dev_info(&dev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
hcd = usb_create_hcd (&dummy_hcd, &dev->dev, dev->dev.bus_id);
if (!hcd)
static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev)
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_lh7a404_remove(hcd, pdev);
return 0;
static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_ppc_soc_remove(hcd, pdev);
return 0;
usb_kill_urb( desc->urb );
}
+static int mts_slave_alloc (struct scsi_device *s)
+{
+ s->inquiry_len = 0x24;
+ return 0;
+}
+
+static int mts_slave_configure (struct scsi_device *s)
+{
+ blk_queue_dma_alignment(s->request_queue, (512 - 1));
+ return 0;
+}
+
static int mts_scsi_abort (Scsi_Cmnd *srb)
{
struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
MTS_INT_INIT();
context->srb->result &= MTS_SCSI_ERR_MASK;
- context->srb->result |= (unsigned)context->status<<1;
+ context->srb->result |= (unsigned)(*context->scsi_status)<<1;
mts_transfer_cleanup(transfer);
mts_int_submit_urb(transfer,
usb_rcvbulkpipe(context->instance->usb_dev,
context->instance->ep_response),
- &context->status,
+ context->scsi_status,
1,
mts_transfer_done );
}
context->data_pipe,
context->data,
context->data_length,
- context->srb->use_sg ? mts_do_sg : mts_data_done);
+ context->srb->use_sg > 1 ? mts_do_sg : mts_data_done);
} else {
mts_get_status(transfer);
}
callback(srb);
}
-
out:
return err;
}
.cmd_per_lun = 1,
.use_clustering = 1,
.emulated = 1,
+ .slave_alloc = mts_slave_alloc,
+ .slave_configure = mts_slave_configure,
+ .max_sectors= 256, /* 128 K */
};
struct vendor_product
MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
return -ENODEV;
}
-
-
+
+
new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
if (!new_desc)
goto out;
if (!new_desc->urb)
goto out_kfree;
+ new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
+ if (!new_desc->context.scsi_status)
+ goto out_kfree2;
+
new_desc->usb_dev = dev;
new_desc->usb_intf = intf;
init_MUTEX(&new_desc->lock);
usb_set_intfdata(intf, new_desc);
return 0;
+ out_kfree2:
+ kfree(new_desc->context.scsi_status);
out_free_urb:
usb_free_urb(new_desc->urb);
out_kfree:
scsi_host_put(desc->host);
usb_free_urb(desc->urb);
+ kfree(desc->context.scsi_status);
kfree(desc);
}
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-
-
int data_pipe;
int fragment;
- u8 status; /* status returned from ep_response after command completion */
+ u8 *scsi_status; /* status returned from ep_response after command completion */
};
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
#define USB_DEVICE_ID_WACOM_PTU 0x0003
#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0
#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F
+#define USB_DEVICE_ID_WACOM_DTF 0x00C0
#define USB_VENDOR_ID_ACECAD 0x0460
#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
*****************************************************************************/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
* though so it's not too big a deal
*/
if (dev->data.pos >= dev->data.len) {
- dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n",
+ dev_dbg(&dev->udev->dev,
+ "%s - Error ran out of data. pos: %d, len: %d\n",
__FUNCTION__, dev->data.pos, dev->data.len);
return -1;
}
err("Bad message recieved, no stop bit found.\n");
}
- dev_dbg(&remote->udev,
+ dev_dbg(&remote->udev->dev,
"%s found valid message: system: %d, button: %d, toggle: %d\n",
__FUNCTION__, message.system, message.button, message.toggle);
*****************************************************************************/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include "hid.h"
#include "pid.h"
-#define DEBUG
-
#define CHECK_OWNERSHIP(i, hid_pid) \
((i) < FF_EFFECTS_MAX && i >= 0 && \
test_bit(FF_PID_FLAGS_USED, &hid_pid->effects[(i)].flags) && \
#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>
-
-#if !defined(DEBUG) && defined(CONFIG_USB_DEBUG)
-#define DEBUG
-#endif
#include <linux/usb.h>
#include <linux/usb_input.h>
* v1.30.1 (pi) - Added Graphire3 support
* v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
* v1.43 (pc) - Added support for Cintiq 21UX
- - Fixed a Graphire bug
- - Merged wacom_intuos3_irq into wacom_intuos_irq
+ * - Fixed a Graphire bug
+ * - Merged wacom_intuos3_irq into wacom_intuos_irq
+ * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
+ * - Report Device IDs
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.43"
+#define DRIVER_VERSION "v1.44"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
MODULE_LICENSE(DRIVER_LICENSE);
#define USB_VENDOR_ID_WACOM 0x056a
+#define STYLUS_DEVICE_ID 0x02
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A
enum {
PENPARTNER = 0,
GRAPHIRE,
+ G4,
PL,
INTUOS,
INTUOS3,
struct urb *irq;
struct wacom_features *features;
int tool[2];
+ int id[2];
__u32 serial[2];
char phys[32];
};
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
struct input_dev *dev = wacom->dev;
- int prox, pressure;
+ int prox, pressure, id;
int retval;
switch (urb->status) {
input_regs(dev, regs);
+ id = ERASER_DEVICE_ID;
if (prox) {
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
* an out of proximity for previous tool then a in for new tool.
*/
if (!wacom->tool[0]) {
- /* Going into proximity select tool */
- wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ /* Eraser bit set for DTF */
+ if (data[1] & 0x10)
+ wacom->tool[1] = BTN_TOOL_RUBBER;
+ else
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
} else {
/* was entered with stylus2 pressed */
- if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
+ if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
/* report out proximity for previous tool */
input_report_key(dev, wacom->tool[1], 0);
input_sync(dev);
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[1] = BTN_TOOL_PEN;
+ id = STYLUS_DEVICE_ID;
}
- input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
+ input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */
input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
input_report_abs(dev, ABS_PRESSURE, pressure);
input_regs(dev, regs);
if (data[1] & 0x04) {
- input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
+ input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0);
input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
} else {
- input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
+ input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0);
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
}
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
}
input_regs(dev, regs);
- input_report_key(dev, BTN_TOOL_PEN, 1);
+ input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID);
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
struct input_dev *dev = wacom->dev;
- int x, y;
+ int x, y, id, rw;
int retval;
switch (urb->status) {
input_regs(dev, regs);
+ id = STYLUS_DEVICE_ID;
if (data[1] & 0x10) { /* in prox */
switch ((data[1] >> 5) & 3) {
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
+ id = ERASER_DEVICE_ID;
break;
case 2: /* Mouse with wheel */
input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
- input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+ if (wacom->features->type == G4) {
+ rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03);
+ input_report_rel(dev, REL_WHEEL, rw);
+ } else
+ input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
/* fall through */
case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
+ id = CURSOR_DEVICE_ID;
input_report_key(dev, BTN_LEFT, data[1] & 0x01);
input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
- input_report_abs(dev, ABS_DISTANCE, data[7]);
+ if (wacom->features->type == G4)
+ input_report_abs(dev, ABS_DISTANCE, data[6]);
+ else
+ input_report_abs(dev, ABS_DISTANCE, data[7]);
break;
}
}
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+ input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
}
}
- input_report_key(dev, wacom->tool[0], data[1] & 0x10);
+ input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0);
input_sync(dev);
+ /* send pad data */
+ if (wacom->features->type == G4) {
+ /* fist time sending pad data */
+ if (wacom->tool[1] != BTN_TOOL_FINGER) {
+ wacom->id[1] = 0;
+ wacom->serial[1] = (data[7] & 0x38) >> 2;
+ }
+ if (data[7] & 0xf8) {
+ input_report_key(dev, BTN_0, (data[7] & 0x40));
+ input_report_key(dev, BTN_4, (data[7] & 0x80));
+ if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e))
+ /* alter REL_WHEEL value so X apps can get it */
+ wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1;
+ else
+ wacom->serial[1] = (data[7] & 0x38 ) >> 2;
+
+ /* don't alter the value when there is no wheel event */
+ if (wacom->serial[1] == 1)
+ wacom->serial[1] = 0;
+ rw = wacom->serial[1];
+ rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07);
+ input_report_rel(dev, REL_WHEEL, rw);
+ wacom->tool[1] = BTN_TOOL_FINGER;
+ wacom->id[1] = data[7] & 0xf8;
+ input_report_key(dev, wacom->tool[1], 0xf0);
+ input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ wacom->id[1] = 0;
+ wacom->serial[1] = 0;
+ input_report_key(dev, wacom->tool[1], 0);
+ input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
+ }
+ input_sync(dev);
+ }
exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
- switch ((data[2] << 4) | (data[3] >> 4)) {
+ wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+ switch (wacom->id[idx]) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
case 0x012:
default: /* Unknown tool */
wacom->tool[idx] = BTN_TOOL_PEN;
}
- input_report_key(dev, wacom->tool[idx], 1);
+ input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
return 1;
}
}
- input_report_key(dev, wacom->tool[idx], 1);
+ input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
{ "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq },
+ { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq },
+ { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq },
{ "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq },
{ "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq },
+ { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq },
+ { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
{ "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq },
+ { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ }
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
switch (wacom->features->type) {
+ case G4:
+ input_dev->evbit[0] |= BIT(EV_MSC);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+ /* fall through */
+
case GRAPHIRE:
input_dev->evbit[0] |= BIT(EV_REL);
input_dev->relbit[0] |= BIT(REL_WHEEL);
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_USS720) += uss720.o
-obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
\ No newline at end of file
+obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
#include <linux/module.h>
#include <linux/init.h>
#include <linux/wait.h>
-#undef DEBUG /* include debug macros until it's done */
#include <linux/usb.h>
/*-------------------------------------------------------------------*/
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG 1
-#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
ibuf, this_read, &partial,
8000);
- dbg(KERN_DEBUG "read stats: result:%d this_read:%u partial:%u",
+ dbg("read stats: result:%d this_read:%u partial:%u",
result, this_read, partial);
if (partial) {
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG 1
-#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/config.h>
-#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG)
-# define DEBUG
-#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
/*****************************************************************************/
-#define DEBUG
-
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/parport.h>
obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/sched.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/sched.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
__u32 status;
int end;
- int removed;
int suspend_lowmem_rx;
int suspend_lowmem_ctrl;
int linkstate;
usb_kill_urb(kaweth->irq_urb);
usb_kill_urb(kaweth->rx_urb);
+ usb_kill_urb(kaweth->tx_urb);
flush_scheduled_work();
spin_lock(&kaweth->device_lock);
- if (kaweth->removed) {
- /* our device is undergoing disconnection - we bail out */
- spin_unlock(&kaweth->device_lock);
- dev_kfree_skb_irq(skb);
- return 0;
- }
-
kaweth_async_set_rx_mode(kaweth);
netif_stop_queue(net);
return;
}
netdev = kaweth->net;
- kaweth->removed = 1;
- usb_kill_urb(kaweth->irq_urb);
- usb_kill_urb(kaweth->rx_urb);
- usb_kill_urb(kaweth->tx_urb);
kaweth_dbg("Unregistering net device");
unregister_netdev(netdev);
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
* is out of the interrupt routine.
*/
-#undef DEBUG
-
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
// #define VERBOSE // more; success messages
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
(11/11/2001) gkh
Added support for the m125 devices, and added check to prevent oopses
- for Clié devices that lie about the number of ports they have.
+ for Clié devices that lie about the number of ports they have.
(08/30/2001) gkh
Added support for the Clie devices, both the 3.5 and 4.0 os versions.
To compile this driver as a module, choose M here: the
module will be called airprime.
+config USB_SERIAL_ANYDATA
+ tristate "USB AnyData CDMA Wireless Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a AnyData CDMA device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called anydata.
+
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL
To compile this driver as a module, choose M here: the
module will be called mct_u232.
-config USB_SERIAL_NOKIA_DKU2
- tristate "USB Nokia DKU2 Driver"
- depends on USB_SERIAL
- help
- Say Y here if you want to use a Nokia DKU2 device.
-
- To compile this driver as a module, choose M here: the
- module will be called nokia_dku2.
-
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
depends on USB_SERIAL
usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
+obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
-obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
--- /dev/null
+/*
+ * AnyData CDMA Serial USB driver
+ *
+ * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* if overridden by the user, then use their value for the size of the
+ * read and write urbs */
+static int buffer_size;
+static int debug;
+
+static struct usb_driver anydata_driver = {
+ .owner = THIS_MODULE,
+ .name = "anydata",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static int anydata_open(struct usb_serial_port *port, struct file *filp)
+{
+ char *buffer;
+ int result = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (buffer_size) {
+ /* override the default buffer sizes */
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ kfree (port->read_urb->transfer_buffer);
+ port->read_urb->transfer_buffer = buffer;
+ port->read_urb->transfer_buffer_length = buffer_size;
+
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ kfree (port->write_urb->transfer_buffer);
+ port->write_urb->transfer_buffer = buffer;
+ port->write_urb->transfer_buffer_length = buffer_size;
+ port->bulk_out_size = buffer_size;
+ }
+
+ /* Start reading from the device */
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ usb_serial_generic_write_bulk_callback, port);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __FUNCTION__, result);
+
+ return result;
+}
+
+static struct usb_serial_driver anydata_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "anydata",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
+ .open = anydata_open,
+};
+
+static int __init anydata_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&anydata_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&anydata_driver);
+ if (retval)
+ usb_serial_deregister(&anydata_device);
+ return retval;
+}
+
+static void __exit anydata_exit(void)
+{
+ usb_deregister(&anydata_driver);
+ usb_serial_deregister(&anydata_device);
+}
+
+module_init(anydata_init);
+module_exit(anydata_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
schedule_work(&port->work);
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
void usb_serial_generic_shutdown (struct usb_serial *serial)
{
+++ /dev/null
-/*
- * Nokia DKU2 USB driver
- *
- * Copyright (C) 2004
- * Author: C Kemp
- *
- * This program is largely derived from work by the linux-usb group
- * and associated source files. Please see the usb/serial files for
- * individual credits and copyrights.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
- * Added short name to device structure to make driver load into kernel 2.6.13
- *
- * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
- * Added usb_deregister to exit code - to allow remove and reinsert of module
- */
-
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include "usb-serial.h"
-
-
-#define NOKIA_VENDOR_ID 0x0421
-#define NOKIA7600_PRODUCT_ID 0x0400
-#define NOKIA6230_PRODUCT_ID 0x040f
-#define NOKIA6170_PRODUCT_ID 0x0416
-#define NOKIA6670_PRODUCT_ID 0x041d
-#define NOKIA6680_PRODUCT_ID 0x041e
-#define NOKIA6230i_PRODUCT_ID 0x0428
-
-#define NOKIA_AT_PORT 0x82
-#define NOKIA_FBUS_PORT 0x86
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.2"
-#define DRIVER_AUTHOR "C Kemp"
-#define DRIVER_DESC "Nokia DKU2 Driver"
-
-static struct usb_device_id id_table [] = {
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
- { } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* The only thing which makes this device different from a generic
- * device is that we have to set an alternative configuration to make
- * the relevant endpoints available. In 2.6 this is really easy... */
-static int nokia_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
- int retval = -ENODEV;
-
- if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) {
- /* the AT port */
- dev_info(&serial->dev->dev, "Nokia AT Port:\n");
- retval = 0;
- } else if (serial->interface->num_altsetting == 2 &&
- serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) {
- /* the FBUS port */
- dev_info(&serial->dev->dev, "Nokia FBUS Port:\n");
- usb_set_interface(serial->dev, 10, 1);
- retval = 0;
- }
-
- return retval;
-}
-
-static struct usb_driver nokia_driver = {
- .owner = THIS_MODULE,
- .name = "nokia_dku2",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
-static struct usb_serial_driver nokia_serial_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "nokia_dku2",
- },
- .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver",
- .id_table = id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .probe = nokia_probe,
-};
-
-static int __init nokia_init(void)
-{
- int retval;
-
- retval = usb_serial_register(&nokia_serial_driver);
- if (retval)
- return retval;
-
- retval = usb_register(&nokia_driver);
- if (retval) {
- usb_serial_deregister(&nokia_serial_driver);
- return retval;
- }
-
- info(DRIVER_VERSION " " DRIVER_AUTHOR);
- info(DRIVER_DESC);
-
- return retval;
-}
-
-static void __exit nokia_exit(void)
-{
- usb_deregister(&nokia_driver);
- usb_serial_deregister(&nokia_serial_driver);
-}
-
-module_init(nokia_init);
-module_exit(nokia_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
{ } /* Terminating entry */
u8 length = UART_STATE;
if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
- (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65)) {
+ (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 ||
+ le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 ||
+ le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) {
length = 1;
status_idx = 0;
}
#define SAMSUNG_PRODUCT_ID 0x8001
#define SIEMENS_VENDOR_ID 0x11f5
+#define SIEMENS_PRODUCT_ID_SX1 0x0001
#define SIEMENS_PRODUCT_ID_X65 0x0003
+#define SIEMENS_PRODUCT_ID_X75 0x0004
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
- depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL
+ depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM
help
Say Y here to include additional code to support the Maxtor OneTouch
USB hard drive's onetouch button.
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- msleep(25);
+ msleep(500);
/*
* In attempt to distinguish between HP CDRW's and Flash readers, we now
"DIMAGE E223",
US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
-UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100,
- "Hagiwara",
- "FlashGate SmartMedia",
- US_SC_SCSI, US_PR_BULK, NULL, 0 ),
-
UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
"Hagiwara",
"Flashgate",
*
*/
#ifdef CONFIG_USB_STORAGE_ONETOUCH
+ UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
+ "Maxtor",
+ "OneTouch External Harddrive",
+ US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+ 0),
UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
"Maxtor",
"OneTouch External Harddrive",
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/prom.h>
int *pp, i;
unsigned int len;
int width = 640, height = 480, depth = 8, pitch;
- unsigned *up;
- unsigned long address;
+ unsigned int rsize, *up;
+ unsigned long address = 0;
if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
&& len == sizeof(int))
pitch = 0x1000;
} else
pitch = width;
- if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL
- && len == sizeof(unsigned))
+
+ rsize = (unsigned long)pitch * (unsigned long)height *
+ (unsigned long)(depth / 8);
+
+ /* Try to match device to a PCI device in order to get a properly
+ * translated address rather then trying to decode the open firmware
+ * stuff in various incorrect ways
+ */
+#ifdef CONFIG_PCI
+ /* First try to locate the PCI device if any */
+ {
+ struct pci_dev *pdev = NULL;
+
+ for_each_pci_dev(pdev) {
+ if (dp == pci_device_to_OF_node(pdev))
+ break;
+ }
+ if (pdev) {
+ for (i = 0; i < 6 && address == 0; i++) {
+ if ((pci_resource_flags(pdev, i) &
+ IORESOURCE_MEM) &&
+ (pci_resource_len(pdev, i) >= rsize))
+ address = pci_resource_start(pdev, i);
+ }
+ pci_dev_put(pdev);
+ }
+ }
+#endif /* CONFIG_PCI */
+
+ if (address == 0 &&
+ (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+ len == sizeof(unsigned))
address = (u_long) * up;
- else {
+ if (address == 0) {
for (i = 0; i < dp->n_addrs; ++i)
if (dp->addrs[i].size >=
pitch * height * depth / 8)
#include <linux/vt_kern.h>
#include <linux/fb.h>
#include <linux/ext2_fs.h>
+#include <linux/ext3_jbd.h>
+#include <linux/ext3_fs.h>
#include <linux/videodev.h>
#include <linux/netdevice.h>
#include <linux/raw.h>
#include <linux/hiddev.h>
+#include <linux/dvb/audio.h>
+#include <linux/dvb/dmx.h>
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/video.h>
+
#undef INCLUDES
#endif
/* Aiee. Someone does not find a difference between int and long */
#define EXT2_IOC32_GETFLAGS _IOR('f', 1, int)
#define EXT2_IOC32_SETFLAGS _IOW('f', 2, int)
+#define EXT3_IOC32_GETVERSION _IOR('f', 3, int)
+#define EXT3_IOC32_SETVERSION _IOR('f', 4, int)
+#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int)
+#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int)
+#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
+#ifdef CONFIG_JBD_DEBUG
+#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
+#endif
+
#define EXT2_IOC32_GETVERSION _IOR('v', 1, int)
#define EXT2_IOC32_SETVERSION _IOW('v', 2, int)
return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
}
+static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ /* These are just misnamed, they actually get/put from/to user an int */
+ switch (cmd) {
+ case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break;
+ case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break;
+ case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break;
+ case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break;
+ case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break;
+#ifdef CONFIG_JBD_DEBUG
+ case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break;
+#endif
+ }
+ return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
+}
+
struct video_tuner32 {
compat_int_t tuner;
char name[32];
return err;
}
+struct compat_dmx_event {
+ dmx_event_t event;
+ compat_time_t timeStamp;
+ union
+ {
+ dmx_scrambling_status_t scrambling;
+ } u;
+};
+
+static int do_dmx_get_event(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ struct dmx_event kevent;
+ mm_segment_t old_fs = get_fs();
+ int err;
+
+ set_fs(KERNEL_DS);
+ err = sys_ioctl(fd, cmd, (unsigned long) &kevent);
+ set_fs(old_fs);
+
+ if (!err) {
+ struct compat_dmx_event __user *up = compat_ptr(arg);
+
+ err = put_user(kevent.event, &up->event);
+ err |= put_user(kevent.timeStamp, &up->timeStamp);
+ err |= put_user(kevent.u.scrambling, &up->u.scrambling);
+ if (err)
+ err = -EFAULT;
+ }
+
+ return err;
+}
+
+struct compat_video_event {
+ int32_t type;
+ compat_time_t timestamp;
+ union {
+ video_size_t size;
+ unsigned int frame_rate;
+ } u;
+};
+
+static int do_video_get_event(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ struct video_event kevent;
+ mm_segment_t old_fs = get_fs();
+ int err;
+
+ set_fs(KERNEL_DS);
+ err = sys_ioctl(fd, cmd, (unsigned long) &kevent);
+ set_fs(old_fs);
+
+ if (!err) {
+ struct compat_video_event __user *up = compat_ptr(arg);
+
+ err = put_user(kevent.type, &up->type);
+ err |= put_user(kevent.timestamp, &up->timestamp);
+ err |= put_user(kevent.u.size.w, &up->u.size.w);
+ err |= put_user(kevent.u.size.h, &up->u.size.h);
+ err |= put_user(kevent.u.size.aspect_ratio,
+ &up->u.size.aspect_ratio);
+ if (err)
+ err = -EFAULT;
+ }
+
+ return err;
+}
+
+struct compat_video_still_picture {
+ compat_uptr_t iFrame;
+ int32_t size;
+};
+
+static int do_video_stillpicture(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ struct compat_video_still_picture __user *up;
+ struct video_still_picture __user *up_native;
+ compat_uptr_t fp;
+ int32_t size;
+ int err;
+
+ up = (struct compat_video_still_picture __user *) arg;
+ err = get_user(fp, &up->iFrame);
+ err |= get_user(size, &up->size);
+ if (err)
+ return -EFAULT;
+
+ up_native =
+ compat_alloc_user_space(sizeof(struct video_still_picture));
+
+ put_user(compat_ptr(fp), &up_native->iFrame);
+ put_user(size, &up_native->size);
+
+ err = sys_ioctl(fd, cmd, (unsigned long) up_native);
+
+ return err;
+}
+
+struct compat_video_spu_palette {
+ int length;
+ compat_uptr_t palette;
+};
+
+static int do_video_set_spu_palette(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ struct compat_video_spu_palette __user *up;
+ struct video_spu_palette __user *up_native;
+ compat_uptr_t palp;
+ int length, err;
+
+ up = (struct compat_video_spu_palette __user *) arg;
+ err = get_user(palp, &up->palette);
+ err |= get_user(length, &up->length);
+
+ up_native = compat_alloc_user_space(sizeof(struct video_spu_palette));
+ put_user(compat_ptr(palp), &up_native->palette);
+ put_user(length, &up_native->length);
+
+ err = sys_ioctl(fd, cmd, (unsigned long) up_native);
+
+ return err;
+}
+
#ifdef CONFIG_NET
static int do_siocgstamp(unsigned int fd, unsigned int cmd, unsigned long arg)
{
HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl)
+COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD)
+#ifdef CONFIG_JBD_DEBUG
+HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl)
+#endif
HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl)
HANDLE_IOCTL(NCP_IOC_SETPRIVATEDATA_32, do_ncp_setprivatedata)
#endif
+/* dvb */
+HANDLE_IOCTL(DMX_GET_EVENT, do_dmx_get_event)
+HANDLE_IOCTL(VIDEO_GET_EVENT, do_video_get_event)
+HANDLE_IOCTL(VIDEO_STILLPICTURE, do_video_stillpicture)
+HANDLE_IOCTL(VIDEO_SET_SPU_PALETTE, do_video_set_spu_palette)
+
#undef DECLARES
#endif
*/
#include <linux/config.h>
#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/hardware/clps7111.h>
#undef CLPS7111_BASE
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "asm/arch/platform.h"
-#include "asm/arch/hardware.h"
+#include "asm/hardware.h"
#define UART00_TYPE (volatile unsigned int*)
#include "asm/arch/uart00.h"
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define LSR 0x14
#define TEMPTY 0x40
#define __ARM_IRQS_H__
/* Use the imx definitions */
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
/*
* IMX Interrupt numbers
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define CLOCK_TICK_RATE (CLK32)
#endif
#include <linux/config.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#define hard_smp_processor_id() \
#ifndef _ASM_ARCH_AUXREG_H
#define _ASM_ARCH_AUXREG_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE))
#ifndef _ASM_ARCH_GPTIMERS_H
#define _ASM_ARCH_GPTIMERS_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
/*
* Layout of L7200 general purpose timer registers
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
* The definition of NR_IRQS is in board-specific header file, which is
* included via hardware.h
*/
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#ifndef NR_IRQS
#define NR_IRQS IH_BOARD_BASE
#ifndef __ASM_ARCH_OMAP_MCBSP_H
#define __ASM_ARCH_OMAP_MCBSP_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define OMAP730_MCBSP1_BASE 0xfffb1000
#define OMAP730_MCBSP2_BASE 0xfffb1800
#include <linux/config.h>
#include <asm/mach-types.h>
#include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/prcm.h>
#ifndef CONFIG_MACH_VOICEBLUE
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n) __io(IO_ADDRESS(n))
#endif
static inline void arch_reset(char mode)
{
- unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET);
+ void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
unsigned int val;
/*
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/io.h>
#ifndef __ASSEMBLY__
#ifdef CONFIG_SA1111
-static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
-{
- unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
- if (node != 0)
- sz = 0;
-
- size[1] = size[0] - sz;
- size[0] = sz;
-}
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
#define arch_adjust_zones(node, size, holes) \
- __arch_adjust_zones(node, size, holes)
+ sa1111_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
#define __ASM_ARM_ATOMIC_H
#include <linux/config.h>
+#include <linux/compiler.h>
typedef struct { volatile int counter; } atomic_t;
static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
{
- u32 oldval, res;
+ unsigned long oldval, res;
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
+ "mov %0, #0\n"
"teq %1, %3\n"
"strexeq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
#ifdef __KERNEL__
+#include <linux/compiler.h>
#include <asm/system.h>
#define smp_mb__before_clear_bit() mb()
#include <linux/config.h>
#ifndef __ASSEMBLY__
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x)))
#else
#define DC21285_IO(x) (x)
#ifndef __ASM_ARM_MMU_CONTEXT_H
#define __ASM_ARM_MMU_CONTEXT_H
+#include <linux/compiler.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
struct pt_regs *),
int sig, const char *name);
-#include <asm/proc-fns.h>
-
#define xchg(ptr,x) \
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
extern asmlinkage void __backtrace(void);
extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+struct mm_struct;
extern void show_pte(struct mm_struct *mm, unsigned long addr);
extern void __show_regs(struct pt_regs *);
#ifdef __KERNEL__
+#include <linux/compiler.h>
#include <asm/fpstate.h>
#define THREAD_SIZE_ORDER 1
#define __HAVE_ARCH_SIG_BITOPS
-static __inline__ void sigaddset(sigset_t *set, int _sig)
+#define sigaddset(set,sig) \
+ (__builtin_constant_p(sig) ? \
+ __const_sigaddset((set),(sig)) : \
+ __gen_sigaddset((set),(sig)))
+
+static __inline__ void __gen_sigaddset(sigset_t *set, int _sig)
{
- __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+ __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
}
-static __inline__ void sigdelset(sigset_t *set, int _sig)
+static __inline__ void __const_sigaddset(sigset_t *set, int _sig)
{
- __asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+ unsigned long sig = _sig - 1;
+ set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW);
+}
+
+#define sigdelset(set,sig) \
+ (__builtin_constant_p(sig) ? \
+ __const_sigdelset((set),(sig)) : \
+ __gen_sigdelset((set),(sig)))
+
+
+static __inline__ void __gen_sigdelset(sigset_t *set, int _sig)
+{
+ __asm__("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static __inline__ void __const_sigdelset(sigset_t *set, int _sig)
+{
+ unsigned long sig = _sig - 1;
+ set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW));
}
static __inline__ int __const_sigismember(sigset_t *set, int _sig)
}
/*
- * atomic_sub_if_positive - add integer to atomic variable
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
* @v: pointer of type atomic_t
*
- * Atomically test @v and decrement if it is greater than 0.
- * The function returns the old value of @v minus 1.
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
*/
static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
{
}
/*
- * atomic64_sub_if_positive - add integer to atomic variable
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
* @v: pointer of type atomic64_t
*
- * Atomically test @v and decrement if it is greater than 0.
- * The function returns the old value of @v minus 1.
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
*/
static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
{
#define __BUILD_MEMORY_STRING(bwlq, type) \
\
-static inline void writes##bwlq(volatile void __iomem *mem, void *addr, \
- unsigned int count) \
+static inline void writes##bwlq(volatile void __iomem *mem, \
+ const void *addr, unsigned int count) \
{ \
- volatile type *__addr = addr; \
+ const volatile type *__addr = addr; \
\
while (count--) { \
mem_write##bwlq(*__addr, mem); \
#define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff
};
-extern struct sgi_crime *crime;
+extern struct sgi_crime __iomem *crime;
#define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */
/* register definitions for parallel port DMA */
struct mace_parport {
-/* 0 - do nothing, 1 - pulse terminal count to the device after buffer is drained */
-#define MACEPAR_CONTEXT_LASTFLAG BIT(63)
-/* Should not cross 4K page boundary */
-#define MACEPAR_CONTEXT_DATALEN_MASK 0xfff00000000
-/* Can be arbitrarily aligned on any byte boundary on output, 64 byte aligned on input */
-#define MACEPAR_CONTEXT_BASEADDR_MASK 0xffffffff
+ /* 0 - do nothing,
+ * 1 - pulse terminal count to the device after buffer is drained */
+#define MACEPAR_CONTEXT_LASTFLAG BIT(63)
+ /* Should not cross 4K page boundary */
+#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL
+#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL
+#define MACEPAR_CONTEXT_DATALEN_SHIFT 32
+ /* Can be arbitrarily aligned on any byte boundary on output,
+ * 64 byte aligned on input */
+#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL
volatile u64 context_a;
volatile u64 context_b;
-#define MACEPAR_CTLSTAT_DIRECTION BIT(0) /* 0 - mem->device, 1 - device->mem */
-#define MACEPAR_CTLSTAT_ENABLE BIT(1) /* 0 - channel frozen, 1 - channel enabled */
-#define MACEPAR_CTLSTAT_RESET BIT(2) /* 0 - channel active, 1 - complete channel reset */
-#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3)
-#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4)
- volatile u64 cntlstat; /* Control/Status register */
-#define MACEPAR_DIAG_CTXINUSE BIT(1)
-#define MACEPAR_DIAG_DMACTIVE BIT(2) /* 1 - Dma engine is enabled and processing something */
-#define MACEPAR_DIAG_CTRMASK 0x3ffc /* Counter of bytes left */
- volatile u64 diagnostic; /* RO: diagnostic register */
+ /* 0 - mem->device, 1 - device->mem */
+#define MACEPAR_CTLSTAT_DIRECTION BIT(0)
+ /* 0 - channel frozen, 1 - channel enabled */
+#define MACEPAR_CTLSTAT_ENABLE BIT(1)
+ /* 0 - channel active, 1 - complete channel reset */
+#define MACEPAR_CTLSTAT_RESET BIT(2)
+#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3)
+#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4)
+ volatile u64 cntlstat; /* Control/Status register */
+#define MACEPAR_DIAG_CTXINUSE BIT(0)
+ /* 1 - Dma engine is enabled and processing something */
+#define MACEPAR_DIAG_DMACTIVE BIT(1)
+ /* Counter of bytes left */
+#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL
+#define MACEPAR_DIAG_CTRSHIFT 2
+ volatile u64 diagnostic; /* RO: diagnostic register */
};
/* ISA Control and DMA registers */
char _pad6[0x80000 - sizeof(struct mace_isa)];
};
-extern struct sgi_mace *mace;
+extern struct sgi_mace __iomem *mace;
#endif /* __ASM_MACE_H__ */
#define BOARD_PC1_INT DB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/* Nand chip select */
+#define NAND_CS 1
+
#endif /* __ASM_DB1200_H */
((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_CS 1
+
+/* should be done by yamon */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_DB1X00_H */
#ifndef __ASM_MACH_IP32_MC146818RTC_H
#define __ASM_MACH_IP32_MC146818RTC_H
-#include <asm/io.h>
#include <asm/ip32/mace.h>
#define RTC_PORT(x) (0x70 + (x))
mace->isa.rtc[addr << 8] = data;
}
-/* FIXME: Do it right. For now just assume that noone lives in 20th century
- * and no O2 user in 22th century ;-) */
+/*
+ * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-)
+ */
#define mc146818_decode_year(year) ((year) + 2000)
#define RTC_ALWAYS_BCD 0
*
* Copyright (C) 2003 by Ralf Baechle
*/
-#ifndef __ASM_MACH_JMR3927_ASM_DS1742_H
-#define __ASM_MACH_JMR3927_ASM_DS1742_H
+#ifndef __ASM_MACH_JMR3927_DS1742_H
+#define __ASM_MACH_JMR3927_DS1742_H
#include <asm/jmr3927/jmr3927.h>
#define rtc_read(reg) (jmr3927_nvram_in(addr))
#define rtc_write(data, reg) (jmr3927_nvram_out((data),(reg)))
-#endif /* __ASM_MACH_JMR3927_ASM_DS1742_H */
+#endif /* __ASM_MACH_JMR3927_DS1742_H */
#define BOARD_PC1_INT PB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/* Nand chip select */
+#define NAND_CS 1
+
#endif /* __ASM_PB1200_H */
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_CS 1
+
+/* should be done by yamon */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+
#endif /* __ASM_PB1550_H */
#ifndef _MIPS_SEADINT_H
#define _MIPS_SEADINT_H
-#define SEADINT_UART0 2
-#define SEADINT_UART1 3
+/*
+ * Interrupts 0..7 are used for SEAD CPU interrupts
+ */
+#define MIPSCPU_INT_BASE 0
+
+#define MIPSCPU_INT_UART0 2
+#define MIPSCPU_INT_UART1 3
-extern void seadint_init(void);
+#define MIPSCPU_INT_CPUCTR 7
#endif /* !(_MIPS_SEADINT_H) */
#ifdef __KERNEL__
#include <asm/sigcontext.h>
-/*
- * The following break codes are or were in use for specific purposes in
- * other MIPS operating systems. Linux/MIPS doesn't use all of them. The
- * unused ones are here as placeholders; we might encounter them in
- * non-Linux/MIPS object files or make use of them in the future.
- */
-#define BRK_USERBP 0 /* User bp (used by debuggers) */
-#define BRK_KERNELBP 1 /* Break in the kernel */
-#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */
-#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */
-#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */
-#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */
-#define BRK_OVERFLOW 6 /* Overflow check */
-#define BRK_DIVZERO 7 /* Divide by zero check */
-#define BRK_RANGE 8 /* Range error check */
-#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */
-#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
-#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
-#define BRK_MULOVF 1023 /* Multiply overflow */
-#define BRK_BUG 512 /* Used by BUG() */
-
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#endif /* __KERNEL__ */
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#ifdef __powerpc64__
/* Add the 64b processor unique features in the top half of the word */
#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000)
#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000)
-#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000)
#define CPU_FTR_IABR ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000)
#define CPU_FTR_16M_PAGE ASM_CONST(0x0)
#define CPU_FTR_TLBIEL ASM_CONST(0x0)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0)
-#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0)
#define CPU_FTR_IABR ASM_CONST(0x0)
#define CPU_FTR_MMCRA ASM_CONST(0x0)
#define CPU_FTR_CTRL ASM_CONST(0x0)
CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN,
CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_MAYBE_CAN_NAP,
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN,
CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_E200 = CPU_FTR_USE_TB,
- CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
+ CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_BIG_PHYS,
- CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON,
+ CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN,
#ifdef __powerpc64__
CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
* Anton Blanchard.
*/
-extern unsigned long tb_ticks_per_usec;
-
-#ifdef CONFIG_PPC64
-/* define these here to prevent circular dependencies */
-/* these instructions control the thread priority on multi-threaded cpus */
-#define __HMT_low() asm volatile("or 1,1,1")
-#define __HMT_medium() asm volatile("or 2,2,2")
-#else
-#define __HMT_low()
-#define __HMT_medium()
-#endif
-
-#define __barrier() asm volatile("" ::: "memory")
-
-static inline unsigned long __get_tb(void)
-{
- unsigned long rval;
-
- asm volatile("mftb %0" : "=r" (rval));
- return rval;
-}
-
-static inline void __delay(unsigned long loops)
-{
- unsigned long start = __get_tb();
-
- while((__get_tb() - start) < loops)
- __HMT_low();
- __HMT_medium();
- __barrier();
-}
-
-static inline void udelay(unsigned long usecs)
-{
- unsigned long loops = tb_ticks_per_usec * usecs;
-
- __delay(loops);
-}
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
#endif /* _ASM_POWERPC_DELAY_H */
#ifdef CONFIG_EEH
+extern int eeh_subsystem_enabled;
+
/* Values for eeh_mode bits in device_node */
#define EEH_MODE_SUPPORTED (1<<0)
#define EEH_MODE_NOCHECK (1<<1)
* If this macro yields TRUE, the caller relays to eeh_check_failure()
* which does further tests out of line.
*/
-#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0)
+#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled)
/*
* Reads from a device which has been isolated by EEH will return
extern u64 ppc64_pft_size;
/* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
extern unsigned long isa_io_base;
-extern void pci_setup_pci_controller(struct pci_controller *hose);
extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
.cache_hot_time = (10*1000000), \
.cache_nice_tries = 1, \
.per_cpu_gain = 100, \
+ .busy_idx = 3, \
+ .idle_idx = 1, \
+ .newidle_idx = 2, \
+ .wake_idx = 1, \
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_EXEC \
| SD_BALANCE_NEWIDLE \
#define VDSO32_MBASE VDSO32_LBASE
#define VDSO64_MBASE VDSO64_LBASE
-#define VDSO_VERSION_STRING LINUX_2.6.12
+#define VDSO_VERSION_STRING LINUX_2.6.15
/* Define if 64 bits VDSO has procedure descriptors */
#undef VDS64_HAS_DESCRIPTORS
#define CPM_IMMR_OFFSET 0x101a8
#endif
+#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+ (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
#endif
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
int busno; /* for pci devices */
int bussubno; /* for pci devices */
int devfn; /* for pci devices */
+
+#ifdef CONFIG_PPC_PSERIES
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
int eeh_check_count; /* # times driver ignored error */
int eeh_freeze_count; /* # times this device froze up. */
int eeh_is_bridge; /* device is pci-to-pci bridge */
-
+#endif
int pci_ext_config_space; /* for pci devices */
struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */
struct device_node *node; /* back-pointer to the device_node */
#ifdef CONFIG_PPC_ISERIES
struct list_head Device_List;
- int Irq; /* Assigned IRQ */
- int Flags; /* Possible flags(disable/bist)*/
- u8 LogicalSlot; /* Hv Slot Index for Tces */
+ int Irq; /* Assigned IRQ */
+ int Flags; /* Possible flags(disable/bist)*/
+ u8 LogicalSlot; /* Hv Slot Index for Tces */
#endif
u32 config_space[16]; /* saved PCI config space */
};
return PCI_DN(busdn)->phb;
}
+extern struct pci_controller *
+pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
/* Return values for ppc_md.pci_probe_mode function */
#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
#include <linux/threads.h>
#include <linux/cache.h>
+#include <asm/irq.h>
+
typedef struct {
unsigned int __softirq_pending;
} ____cacheline_aligned irq_cpustat_t;
# error HARDIRQ_BITS is too low!
#endif
+void ack_bad_irq(unsigned int irq);
+
#endif /* __V850_HARDIRQ_H__ */
COMPATIBLE_IOCTL(HIDIOCSFLAG)
COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINDEX)
COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINFO)
+/* dvb */
+COMPATIBLE_IOCTL(AUDIO_STOP)
+COMPATIBLE_IOCTL(AUDIO_PLAY)
+COMPATIBLE_IOCTL(AUDIO_PAUSE)
+COMPATIBLE_IOCTL(AUDIO_CONTINUE)
+COMPATIBLE_IOCTL(AUDIO_SELECT_SOURCE)
+COMPATIBLE_IOCTL(AUDIO_SET_MUTE)
+COMPATIBLE_IOCTL(AUDIO_SET_AV_SYNC)
+COMPATIBLE_IOCTL(AUDIO_SET_BYPASS_MODE)
+COMPATIBLE_IOCTL(AUDIO_CHANNEL_SELECT)
+COMPATIBLE_IOCTL(AUDIO_GET_STATUS)
+COMPATIBLE_IOCTL(AUDIO_GET_CAPABILITIES)
+COMPATIBLE_IOCTL(AUDIO_CLEAR_BUFFER)
+COMPATIBLE_IOCTL(AUDIO_SET_ID)
+COMPATIBLE_IOCTL(AUDIO_SET_MIXER)
+COMPATIBLE_IOCTL(AUDIO_SET_STREAMTYPE)
+COMPATIBLE_IOCTL(AUDIO_SET_EXT_ID)
+COMPATIBLE_IOCTL(AUDIO_SET_ATTRIBUTES)
+COMPATIBLE_IOCTL(AUDIO_SET_KARAOKE)
+COMPATIBLE_IOCTL(DMX_START)
+COMPATIBLE_IOCTL(DMX_STOP)
+COMPATIBLE_IOCTL(DMX_SET_FILTER)
+COMPATIBLE_IOCTL(DMX_SET_PES_FILTER)
+COMPATIBLE_IOCTL(DMX_SET_BUFFER_SIZE)
+COMPATIBLE_IOCTL(DMX_GET_PES_PIDS)
+COMPATIBLE_IOCTL(DMX_GET_CAPS)
+COMPATIBLE_IOCTL(DMX_SET_SOURCE)
+COMPATIBLE_IOCTL(DMX_GET_STC)
+COMPATIBLE_IOCTL(FE_GET_INFO)
+COMPATIBLE_IOCTL(FE_DISEQC_RESET_OVERLOAD)
+COMPATIBLE_IOCTL(FE_DISEQC_SEND_MASTER_CMD)
+COMPATIBLE_IOCTL(FE_DISEQC_RECV_SLAVE_REPLY)
+COMPATIBLE_IOCTL(FE_DISEQC_SEND_BURST)
+COMPATIBLE_IOCTL(FE_SET_TONE)
+COMPATIBLE_IOCTL(FE_SET_VOLTAGE)
+COMPATIBLE_IOCTL(FE_ENABLE_HIGH_LNB_VOLTAGE)
+COMPATIBLE_IOCTL(FE_READ_STATUS)
+COMPATIBLE_IOCTL(FE_READ_BER)
+COMPATIBLE_IOCTL(FE_READ_SIGNAL_STRENGTH)
+COMPATIBLE_IOCTL(FE_READ_SNR)
+COMPATIBLE_IOCTL(FE_READ_UNCORRECTED_BLOCKS)
+COMPATIBLE_IOCTL(FE_SET_FRONTEND)
+COMPATIBLE_IOCTL(FE_GET_FRONTEND)
+COMPATIBLE_IOCTL(FE_GET_EVENT)
+COMPATIBLE_IOCTL(FE_DISHNETWORK_SEND_LEGACY_CMD)
+COMPATIBLE_IOCTL(VIDEO_STOP)
+COMPATIBLE_IOCTL(VIDEO_PLAY)
+COMPATIBLE_IOCTL(VIDEO_FREEZE)
+COMPATIBLE_IOCTL(VIDEO_CONTINUE)
+COMPATIBLE_IOCTL(VIDEO_SELECT_SOURCE)
+COMPATIBLE_IOCTL(VIDEO_SET_BLANK)
+COMPATIBLE_IOCTL(VIDEO_GET_STATUS)
+COMPATIBLE_IOCTL(VIDEO_SET_DISPLAY_FORMAT)
+COMPATIBLE_IOCTL(VIDEO_FAST_FORWARD)
+COMPATIBLE_IOCTL(VIDEO_SLOWMOTION)
+COMPATIBLE_IOCTL(VIDEO_GET_CAPABILITIES)
+COMPATIBLE_IOCTL(VIDEO_CLEAR_BUFFER)
+COMPATIBLE_IOCTL(VIDEO_SET_ID)
+COMPATIBLE_IOCTL(VIDEO_SET_STREAMTYPE)
+COMPATIBLE_IOCTL(VIDEO_SET_FORMAT)
+COMPATIBLE_IOCTL(VIDEO_SET_SYSTEM)
+COMPATIBLE_IOCTL(VIDEO_SET_HIGHLIGHT)
+COMPATIBLE_IOCTL(VIDEO_SET_SPU)
+COMPATIBLE_IOCTL(VIDEO_GET_NAVI)
+COMPATIBLE_IOCTL(VIDEO_SET_ATTRIBUTES)
+COMPATIBLE_IOCTL(VIDEO_GET_SIZE)
+COMPATIBLE_IOCTL(VIDEO_GET_FRAME_RATE)
--- /dev/null
+/*
+ * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) 2003 Guido Guenther <agx@sigxcpu.org>
+ */
+#ifndef __LINUX_DS17287RTC_H
+#define __LINUX_DS17287RTC_H
+
+#include <linux/rtc.h> /* get the user-level API */
+#include <linux/spinlock.h> /* spinlock_t */
+#include <linux/mc146818rtc.h>
+
+/* Register A */
+#define DS_REGA_DV2 0x40 /* countdown chain */
+#define DS_REGA_DV1 0x20 /* oscillator enable */
+#define DS_REGA_DV0 0x10 /* bank select */
+
+/* bank 1 registers */
+#define DS_B1_MODEL 0x40 /* model number byte */
+#define DS_B1_SN1 0x41 /* serial number byte 1 */
+#define DS_B1_SN2 0x42 /* serial number byte 2 */
+#define DS_B1_SN3 0x43 /* serial number byte 3 */
+#define DS_B1_SN4 0x44 /* serial number byte 4 */
+#define DS_B1_SN5 0x45 /* serial number byte 5 */
+#define DS_B1_SN6 0x46 /* serial number byte 6 */
+#define DS_B1_CRC 0x47 /* CRC byte */
+#define DS_B1_CENTURY 0x48 /* Century byte */
+#define DS_B1_DALARM 0x49 /* date alarm */
+#define DS_B1_XCTRL4A 0x4a /* extendec control register 4a */
+#define DS_B1_XCTRL4B 0x4b /* extendec control register 4b */
+#define DS_B1_RTCADDR2 0x4e /* rtc address 2 */
+#define DS_B1_RTCADDR3 0x4f /* rtc address 3 */
+#define DS_B1_RAMLSB 0x50 /* extended ram LSB */
+#define DS_B1_RAMMSB 0x51 /* extended ram MSB */
+#define DS_B1_RAMDPORT 0x53 /* extended ram data port */
+
+/* register details */
+/* extended control register 4a */
+#define DS_XCTRL4A_VRT2 0x80 /* valid ram and time */
+#define DS_XCTRL4A_INCR 0x40 /* increment progress status */
+#define DS_XCTRL4A_BME 0x20 /* burst mode enable */
+#define DS_XCTRL4A_PAB 0x08 /* power active bar ctrl */
+#define DS_XCTRL4A_RF 0x04 /* ram clear flag */
+#define DS_XCTRL4A_WF 0x02 /* wake up alarm flag */
+#define DS_XCTRL4A_KF 0x01 /* kickstart flag */
+
+/* interrupt causes */
+#define DS_XCTRL4A_IFS (DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF)
+
+/* extended control register 4b */
+#define DS_XCTRL4B_ABE 0x80 /* auxiliary battery enable */
+#define DS_XCTRL4B_E32K 0x40 /* enable 32.768 kHz Output */
+#define DS_XCTRL4B_CS 0x20 /* crystal select */
+#define DS_XCTRL4B_RCE 0x10 /* ram clear enable */
+#define DS_XCTRL4B_PRS 0x08 /* PAB resec select */
+#define DS_XCTRL4B_RIE 0x04 /* ram clear interrupt enable */
+#define DS_XCTRL4B_WFE 0x02 /* wake up alarm interrupt enable */
+#define DS_XCTRL4B_KFE 0x01 /* kickstart interrupt enable */
+
+/* interrupt enable bits */
+#define DS_XCTRL4B_IFES (DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE)
+
+#endif /* __LINUX_DS17287RTC_H */
--- /dev/null
+/*
+ * ds1742rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ *
+ * Copyright (C) 1999-2001 Toshiba Corporation
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+#ifndef __LINUX_DS1742RTC_H
+#define __LINUX_DS1742RTC_H
+
+#include <asm/ds1742.h>
+
+#define RTC_BRAM_SIZE 0x800
+#define RTC_OFFSET 0x7f8
+
+/*
+ * Register summary
+ */
+#define RTC_CONTROL (RTC_OFFSET + 0)
+#define RTC_CENTURY (RTC_OFFSET + 0)
+#define RTC_SECONDS (RTC_OFFSET + 1)
+#define RTC_MINUTES (RTC_OFFSET + 2)
+#define RTC_HOURS (RTC_OFFSET + 3)
+#define RTC_DAY (RTC_OFFSET + 4)
+#define RTC_DATE (RTC_OFFSET + 5)
+#define RTC_MONTH (RTC_OFFSET + 6)
+#define RTC_YEAR (RTC_OFFSET + 7)
+
+#define RTC_CENTURY_MASK 0x3f
+#define RTC_SECONDS_MASK 0x7f
+#define RTC_DAY_MASK 0x07
+
+/*
+ * Bits in the Control/Century register
+ */
+#define RTC_WRITE 0x80
+#define RTC_READ 0x40
+
+/*
+ * Bits in the Seconds register
+ */
+#define RTC_STOP 0x80
+
+/*
+ * Bits in the Day register
+ */
+#define RTC_BATT_FLAG 0x80
+#define RTC_FREQ_TEST 0x40
+
+#endif /* __LINUX_DS1742RTC_H */
#define VPRINTK(fmt, args...)
#endif /* ATA_DEBUG */
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+
#ifdef ATA_NDEBUG
#define assert(expr)
#else
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
* proper HSM is in place. */
+ ATA_FLAG_DEBUGMSG = (1 << 10),
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}
+static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
+{
+ qc->__sg = NULL;
+ qc->flags = 0;
+ qc->cursect = qc->cursg = qc->cursg_ofs = 0;
+ qc->nsect = 0;
+ qc->nbytes = qc->curbytes = 0;
+
+ ata_tf_init(qc->ap, &qc->tf, qc->dev->devno);
+}
+
/**
* ata_irq_on - Enable interrupts on a port.
#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334
#define PCI_VENDOR_ID_MARVELL 0x11ab
+#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/list.h>
#include <linux/compiler.h>
struct file;
};
#ifdef __KERNEL__
+#include <linux/list.h>
extern void sysctl_init(void);
/* LLC Type 1 XID command/response information fields format */
struct llc_xid_info {
- u8 fmt_id; /* always 0x18 for LLC */
+ u8 fmt_id; /* always 0x81 for LLC */
u8 type; /* different if NULL/non-NULL LSAP */
u8 rw; /* sender receive window */
};
/* TCP timestamps are only 32-bits, this causes a slight
* complication on 64-bit systems since we store a snapshot
- * of jiffies in the buffer control blocks below. We decidedly
- * only use of the low 32-bits of jiffies and hide the ugly
+ * of jiffies in the buffer control blocks below. We decided
+ * to use only the low 32-bits of jiffies and hide the ugly
* casts with the following macro.
*/
#define tcp_time_stamp ((__u32)(jiffies))
struct rcu_head rtort_rcu;
int rtort_pipe_count;
struct list_head rtort_free;
+ int rtort_mbtest;
};
static int fullstop = 0; /* stop generating callbacks at test end. */
atomic_t n_rcu_torture_alloc;
atomic_t n_rcu_torture_alloc_fail;
atomic_t n_rcu_torture_free;
+atomic_t n_rcu_torture_mberror;
+atomic_t n_rcu_torture_error;
/*
* Allocate an element from the rcu_tortures pool.
if (i > RCU_TORTURE_PIPE_LEN)
i = RCU_TORTURE_PIPE_LEN;
atomic_inc(&rcu_torture_wcount[i]);
- if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN)
+ if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) {
+ rp->rtort_mbtest = 0;
rcu_torture_free(rp);
- else
+ } else
call_rcu(p, rcu_torture_cb);
}
rp->rtort_pipe_count = 0;
udelay(rcu_random(&rand) & 0x3ff);
old_rp = rcu_torture_current;
+ rp->rtort_mbtest = 1;
rcu_assign_pointer(rcu_torture_current, rp);
smp_wmb();
if (old_rp != NULL) {
schedule_timeout_interruptible(HZ);
continue;
}
+ if (p->rtort_mbtest == 0)
+ atomic_inc(&n_rcu_torture_mberror);
udelay(rcu_random(&rand) & 0x7f);
preempt_disable();
pipe_count = p->rtort_pipe_count;
}
cnt += sprintf(&page[cnt], "rcutorture: ");
cnt += sprintf(&page[cnt],
- "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d",
+ "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
+ "rtmbe: %d",
rcu_torture_current,
rcu_torture_current_version,
list_empty(&rcu_torture_freelist),
atomic_read(&n_rcu_torture_alloc),
atomic_read(&n_rcu_torture_alloc_fail),
- atomic_read(&n_rcu_torture_free));
+ atomic_read(&n_rcu_torture_free),
+ atomic_read(&n_rcu_torture_mberror));
+ if (atomic_read(&n_rcu_torture_mberror) != 0)
+ cnt += sprintf(&page[cnt], " !!!");
cnt += sprintf(&page[cnt], "\nrcutorture: ");
- if (i > 1)
+ if (i > 1) {
cnt += sprintf(&page[cnt], "!!! ");
+ atomic_inc(&n_rcu_torture_error);
+ }
cnt += sprintf(&page[cnt], "Reader Pipe: ");
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
cnt += sprintf(&page[cnt], " %ld", pipesummary[i]);
for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
synchronize_rcu();
rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
- PRINTK_STRING("--- End of test");
+ printk(KERN_ALERT TORTURE_FLAG
+ "--- End of test: %s\n",
+ atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE");
}
static int
INIT_LIST_HEAD(&rcu_torture_freelist);
for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) {
+ rcu_tortures[i].rtort_mbtest = 0;
list_add_tail(&rcu_tortures[i].rtort_free,
&rcu_torture_freelist);
}
atomic_set(&n_rcu_torture_alloc, 0);
atomic_set(&n_rcu_torture_alloc_fail, 0);
atomic_set(&n_rcu_torture_free, 0);
+ atomic_set(&n_rcu_torture_mberror, 0);
+ atomic_set(&n_rcu_torture_error, 0);
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
atomic_set(&rcu_torture_wcount[i], 0);
for_each_cpu(cpu) {
}
return TestClearPageDirty(page);
}
+EXPORT_SYMBOL(clear_page_dirty_for_io);
int test_clear_page_writeback(struct page *page)
{
might_sleep_if(wait);
+restart:
z = zonelist->zones; /* the list of zones suitable for gfp_mask */
if (unlikely(*z == NULL)) {
/* Should this ever happen?? */
return NULL;
}
-restart:
+
page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order,
zonelist, ALLOC_CPUSET);
if (page)
goto got_pg;
- do
+ do {
wakeup_kswapd(*z, order);
- while (*(++z));
+ } while (*(++z));
/*
* OK, we're below the kswapd watermark and have kicked background
/* Describe an entry in the "incomplete datagrams" queue. */
struct ipq {
- struct ipq *next; /* linked list pointers */
+ struct hlist_node list;
struct list_head lru_list; /* lru list member */
u32 user;
u32 saddr;
spinlock_t lock;
atomic_t refcnt;
struct timer_list timer; /* when will this queue expire? */
- struct ipq **pprev;
int iif;
struct timeval stamp;
};
#define IPQ_HASHSZ 64
/* Per-bucket lock is easy to add now. */
-static struct ipq *ipq_hash[IPQ_HASHSZ];
+static struct hlist_head ipq_hash[IPQ_HASHSZ];
static DEFINE_RWLOCK(ipfrag_lock);
static u32 ipfrag_hash_rnd;
static LIST_HEAD(ipq_lru_list);
static __inline__ void __ipq_unlink(struct ipq *qp)
{
- if(qp->next)
- qp->next->pprev = qp->pprev;
- *qp->pprev = qp->next;
+ hlist_del(&qp->list);
list_del(&qp->lru_list);
ip_frag_nqueues--;
}
get_random_bytes(&ipfrag_hash_rnd, sizeof(u32));
for (i = 0; i < IPQ_HASHSZ; i++) {
struct ipq *q;
+ struct hlist_node *p, *n;
- q = ipq_hash[i];
- while (q) {
- struct ipq *next = q->next;
+ hlist_for_each_entry_safe(q, p, n, &ipq_hash[i], list) {
unsigned int hval = ipqhashfn(q->id, q->saddr,
q->daddr, q->protocol);
if (hval != i) {
- /* Unlink. */
- if (q->next)
- q->next->pprev = q->pprev;
- *q->pprev = q->next;
+ hlist_del(&q->list);
/* Relink to new hash chain. */
- if ((q->next = ipq_hash[hval]) != NULL)
- q->next->pprev = &q->next;
- ipq_hash[hval] = q;
- q->pprev = &ipq_hash[hval];
+ hlist_add_head(&q->list, &ipq_hash[hval]);
}
-
- q = next;
}
}
write_unlock(&ipfrag_lock);
static struct ipq *ip_frag_intern(unsigned int hash, struct ipq *qp_in)
{
struct ipq *qp;
-
+#ifdef CONFIG_SMP
+ struct hlist_node *n;
+#endif
write_lock(&ipfrag_lock);
#ifdef CONFIG_SMP
/* With SMP race we have to recheck hash table, because
* such entry could be created on other cpu, while we
* promoted read lock to write lock.
*/
- for(qp = ipq_hash[hash]; qp; qp = qp->next) {
+ hlist_for_each_entry(qp, n, &ipq_hash[hash], list) {
if(qp->id == qp_in->id &&
qp->saddr == qp_in->saddr &&
qp->daddr == qp_in->daddr &&
atomic_inc(&qp->refcnt);
atomic_inc(&qp->refcnt);
- if((qp->next = ipq_hash[hash]) != NULL)
- qp->next->pprev = &qp->next;
- ipq_hash[hash] = qp;
- qp->pprev = &ipq_hash[hash];
+ hlist_add_head(&qp->list, &ipq_hash[hash]);
INIT_LIST_HEAD(&qp->lru_list);
list_add_tail(&qp->lru_list, &ipq_lru_list);
ip_frag_nqueues++;
__u8 protocol = iph->protocol;
unsigned int hash = ipqhashfn(id, saddr, daddr, protocol);
struct ipq *qp;
+ struct hlist_node *n;
read_lock(&ipfrag_lock);
- for(qp = ipq_hash[hash]; qp; qp = qp->next) {
+ hlist_for_each_entry(qp, n, &ipq_hash[hash], list) {
if(qp->id == id &&
qp->saddr == saddr &&
qp->daddr == daddr &&
static DEFINE_SPINLOCK(ip_ftp_lock);
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
static int loose;
module_param(loose, int, 0600);
#include <linux/moduleparam.h>
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
static int max_dcc_channels = 8;
static unsigned int dcc_timeout = 300;
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("IRC (DCC) connection tracking helper");
MODULE_LICENSE("GPL");
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of IRC servers");
module_param(max_dcc_channels, int, 0400);
MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session");
MODULE_LICENSE("GPL");
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of tftp servers");
#if 0
}
static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt,
- u32 in_flight, u32 pkts_acked)
+ u32 in_flight, int data_acked)
{
struct tcp_sock *tp = tcp_sk(sk);
struct hstcp *ca = inet_csk_ca(sk);
* are stalled on filesystem I/O.
*
* Also, since we are only going for a minimum in the
- * non-timestamp case, we do not smoother things out
+ * non-timestamp case, we do not smooth things out
* else with timestamps disabled convergence takes too
* long.
*/
*
* Funny. This algorithm seems to be very broken.
* These formulae increase RTO, when it should be decreased, increase
- * too slowly, when it should be increased fastly, decrease too fastly
+ * too slowly, when it should be increased quickly, decrease too quickly
* etc. I guess in BSD RTO takes ONE value, so that it is absolutely
* does not matter how to _calculate_ it. Seems, it was trap
* that VJ failed to avoid. 8)
}
#endif
/* Rule 8: Use longest matching prefix */
- if (hiscore.rule < 8)
+ if (hiscore.rule < 8) {
hiscore.matchlen = ipv6_addr_diff(&ifa_result->addr, daddr);
- score.rule++;
+ hiscore.rule++;
+ }
score.matchlen = ipv6_addr_diff(&ifa->addr, daddr);
if (score.matchlen > hiscore.matchlen) {
score.rule = 8;
{
struct ipv6_txoptions *opt;
if (optlen == 0)
- optval = 0;
+ optval = NULL;
/* hop-by-hop / destination options are privileged option */
retv = -EPERM;
struct frag_queue
{
- struct frag_queue *next;
+ struct hlist_node list;
struct list_head lru_list; /* lru list member */
__u32 id; /* fragment id */
#define FIRST_IN 2
#define LAST_IN 1
__u16 nhoffset;
- struct frag_queue **pprev;
};
/* Hash table. */
#define IP6Q_HASHSZ 64
-static struct frag_queue *ip6_frag_hash[IP6Q_HASHSZ];
+static struct hlist_head ip6_frag_hash[IP6Q_HASHSZ];
static DEFINE_RWLOCK(ip6_frag_lock);
static u32 ip6_frag_hash_rnd;
static LIST_HEAD(ip6_frag_lru_list);
static __inline__ void __fq_unlink(struct frag_queue *fq)
{
- if(fq->next)
- fq->next->pprev = fq->pprev;
- *fq->pprev = fq->next;
+ hlist_del(&fq->list);
list_del(&fq->lru_list);
ip6_frag_nqueues--;
}
get_random_bytes(&ip6_frag_hash_rnd, sizeof(u32));
for (i = 0; i < IP6Q_HASHSZ; i++) {
struct frag_queue *q;
+ struct hlist_node *p, *n;
- q = ip6_frag_hash[i];
- while (q) {
- struct frag_queue *next = q->next;
+ hlist_for_each_entry_safe(q, p, n, &ip6_frag_hash[i], list) {
unsigned int hval = ip6qhashfn(q->id,
&q->saddr,
&q->daddr);
if (hval != i) {
- /* Unlink. */
- if (q->next)
- q->next->pprev = q->pprev;
- *q->pprev = q->next;
+ hlist_del(&q->list);
/* Relink to new hash chain. */
- if ((q->next = ip6_frag_hash[hval]) != NULL)
- q->next->pprev = &q->next;
- ip6_frag_hash[hval] = q;
- q->pprev = &ip6_frag_hash[hval];
- }
+ hlist_add_head(&q->list,
+ &ip6_frag_hash[hval]);
- q = next;
+ }
}
}
write_unlock(&ip6_frag_lock);
struct frag_queue *fq_in)
{
struct frag_queue *fq;
+#ifdef CONFIG_SMP
+ struct hlist_node *n;
+#endif
write_lock(&ip6_frag_lock);
#ifdef CONFIG_SMP
- for (fq = ip6_frag_hash[hash]; fq; fq = fq->next) {
+ hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) {
if (fq->id == fq_in->id &&
ipv6_addr_equal(&fq_in->saddr, &fq->saddr) &&
ipv6_addr_equal(&fq_in->daddr, &fq->daddr)) {
atomic_inc(&fq->refcnt);
atomic_inc(&fq->refcnt);
- if((fq->next = ip6_frag_hash[hash]) != NULL)
- fq->next->pprev = &fq->next;
- ip6_frag_hash[hash] = fq;
- fq->pprev = &ip6_frag_hash[hash];
+ hlist_add_head(&fq->list, &ip6_frag_hash[hash]);
INIT_LIST_HEAD(&fq->lru_list);
list_add_tail(&fq->lru_list, &ip6_frag_lru_list);
ip6_frag_nqueues++;
fq_find(u32 id, struct in6_addr *src, struct in6_addr *dst)
{
struct frag_queue *fq;
+ struct hlist_node *n;
unsigned int hash = ip6qhashfn(id, src, dst);
read_lock(&ip6_frag_lock);
- for(fq = ip6_frag_hash[hash]; fq; fq = fq->next) {
+ hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) {
if (fq->id == id &&
ipv6_addr_equal(src, &fq->saddr) &&
ipv6_addr_equal(dst, &fq->daddr)) {
/*
* 2. allocate and initialize walker.
*/
- w = kmalloc(sizeof(*w), GFP_KERNEL);
+ w = kmalloc(sizeof(*w), GFP_ATOMIC);
if (w == NULL)
return -ENOMEM;
RT6_TRACE("dump<%p", w);
struct llc_sock* llc = llc_sk(sk);
int rc = 0;
- if (unlikely(llc_data_accept_state(llc->state) || llc->p_flag)) {
+ if (unlikely(llc_data_accept_state(llc->state) ||
+ llc->remote_busy_flag ||
+ llc->p_flag)) {
long timeout = sock_sndtimeo(sk, noblock);
rc = llc_ui_wait_for_busy_core(sk, timeout);
if (sk_wait_event(sk, &timeout,
(sk->sk_shutdown & RCV_SHUTDOWN) ||
(!llc_data_accept_state(llc->state) &&
+ !llc->remote_busy_flag &&
!llc->p_flag)))
break;
rc = -ERESTARTSYS;
llc->ack_must_be_send = 1;
llc->ack_pf = pf_bit & 1;
}
- if (((llc->vR - llc->first_pdu_Ns + 129) % 128) >= llc->npta) {
+ if (((llc->vR - llc->first_pdu_Ns + 1 + LLC_2_SEQ_NBR_MODULO)
+ % LLC_2_SEQ_NBR_MODULO) >= llc->npta) {
llc_conn_ac_send_rr_rsp_f_set_ackpf(sk, skb);
llc->ack_must_be_send = 0;
llc->ack_pf = 0;
llc->dec_step = 0;
llc->dec_cntr = llc->inc_cntr = 2;
++llc->npta;
- if (llc->npta > 127)
- llc->npta = 127 ;
+ if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO)
+ llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO;
} else
--llc->inc_cntr;
return 0;
struct llc_sock *llc = llc_sk(sk);
u8 unacked_pdu = skb_queue_len(&llc->pdu_unack_q);
- llc->k -= unacked_pdu;
- if (llc->k < 2)
- llc->k = 2;
+ if (llc->k - unacked_pdu < 1)
+ llc->k = 1;
+ else
+ llc->k -= unacked_pdu;
return 0;
}
struct llc_sock *llc = llc_sk(sk);
llc->k += 1;
- if (llc->k > 128)
- llc->k = 128 ;
+ if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO)
+ llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO;
return 0;
}
static int llc_conn_ac_inc_vs_by_1(struct sock *sk, struct sk_buff *skb)
{
- llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % 128;
+ llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % LLC_2_SEQ_NBR_MODULO;
return 0;
}
static void nf_ct_unlink_expect(struct nf_conntrack_expect *exp)
{
ASSERT_WRITE_LOCK(&nf_conntrack_lock);
- NF_CT_ASSERT(!timer_pending(&exp_timeout));
+ NF_CT_ASSERT(!timer_pending(&exp->timeout));
list_del(&exp->list);
NF_CT_STAT_INC(expect_delete);
exp->master->expecting--;
kmem_cache_destroy(nf_conntrack_expect_cachep);
free_conntrack_hash(nf_conntrack_hash, nf_conntrack_vmalloc,
nf_conntrack_htable_size);
+
+ /* free l3proto protocol tables */
+ for (i = 0; i < PF_MAX; i++)
+ if (nf_ct_protos[i]) {
+ kfree(nf_ct_protos[i]);
+ nf_ct_protos[i] = NULL;
+ }
}
static struct list_head *alloc_hashtable(int size, int *vmalloced)
cleanup_proc_stat:
#endif
#ifdef CONFIG_PROC_FS
- proc_net_remove("nf_conntrack_stat");
+ remove_proc_entry("nf_conntrack", proc_net_stat);
cleanup_proc_exp:
proc_net_remove("nf_conntrack_expect");
cleanup_proc:
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
+if NET_SCHED
+
choice
prompt "Packet scheduler clock source"
- depends on NET_SCHED
default NET_SCH_CLK_JIFFIES
---help---
Packet schedulers need a monotonic clock that increments at a static
endchoice
comment "Queueing/Scheduling"
- depends on NET_SCHED
config NET_SCH_CBQ
tristate "Class Based Queueing (CBQ)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm. This algorithm classifies the waiting packets
config NET_SCH_HTB
tristate "Hierarchical Token Bucket (HTB)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm. See
config NET_SCH_HFSC
tristate "Hierarchical Fair Service Curve (HFSC)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm.
config NET_SCH_ATM
tristate "ATM Virtual Circuits (ATM)"
- depends on NET_SCHED && ATM
+ depends on ATM
---help---
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers, which in turn
config NET_SCH_PRIO
tristate "Multi Band Priority Queueing (PRIO)"
- depends on NET_SCHED
---help---
Say Y here if you want to use an n-band priority queue packet
scheduler.
config NET_SCH_RED
tristate "Random Early Detection (RED)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm.
config NET_SCH_SFQ
tristate "Stochastic Fairness Queueing (SFQ)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm .
config NET_SCH_TEQL
tristate "True Link Equalizer (TEQL)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the True Link Equalizer (TLE) packet
scheduling algorithm. This queueing discipline allows the combination
config NET_SCH_TBF
tristate "Token Bucket Filter (TBF)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
config NET_SCH_GRED
tristate "Generic Random Early Detection (GRED)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
config NET_SCH_DSMARK
tristate "Differentiated Services marker (DSMARK)"
- depends on NET_SCHED
---help---
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
config NET_SCH_NETEM
tristate "Network emulator (NETEM)"
- depends on NET_SCHED
---help---
Say Y if you want to emulate network delay, loss, and packet
re-ordering. This is often useful to simulate networks when
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
- depends on NET_SCHED
---help---
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
module will be called sch_ingress.
comment "Classification"
- depends on NET_SCHED
config NET_CLS
boolean
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets using
config NET_CLS_TCINDEX
tristate "Traffic-Control Index (TCINDEX)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets based on
config NET_CLS_ROUTE4
tristate "Routing decision (ROUTE)"
- depends NET_SCHED
select NET_CLS_ROUTE
select NET_CLS
---help---
config NET_CLS_ROUTE
bool
- default n
config NET_CLS_FW
tristate "Netfilter mark (FW)"
- depends NET_SCHED
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
config NET_CLS_U32
tristate "Universal 32bit comparisons w/ hashing (U32)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here to be able to classify packetes using a universal
config NET_CLS_RSVP
tristate "IPv4 Resource Reservation Protocol (RSVP)"
- depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
config NET_CLS_RSVP6
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
- depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
config NET_EMATCH
bool "Extended Matches"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to use extended matches on top of classifiers
config NET_CLS_ACT
bool "Actions"
- depends on EXPERIMENTAL && NET_SCHED
+ depends on EXPERIMENTAL
select NET_ESTIMATOR
---help---
Say Y here if you want to use traffic control actions. Actions
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
- depends on NET_SCHED && NET_CLS_ACT!=y
+ depends on NET_CLS_ACT!=y
select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
config NET_CLS_IND
bool "Incoming device classification"
- depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
+ depends on NET_CLS_U32 || NET_CLS_FW
---help---
Say Y here to extend the u32 and fw classifier to support
classification based on the incoming device. This option is
config NET_ESTIMATOR
bool "Rate estimator"
- depends on NET_SCHED
---help---
Say Y here to allow using rate estimators to estimate the current
rate-of-flow for network devices, queues, etc. This module is
automaticaly selected if needed but can be selected manually for
statstical purposes.
+endif # NET_SCHED
+
endmenu
arg->tail[0].iov_len = 0;
try_to_freeze();
+ cond_resched();
if (signalled())
return -EINTR;
tumbler_set_master_volume(mix);
if (chip->update_automute)
chip->update_automute(chip, 0);
- if (mix->headphone_irq >= 0)
+ if (mix->headphone_irq >= 0) {
+ unsigned char val;
+
enable_irq(mix->headphone_irq);
+ /* activate headphone status interrupts */
+ val = do_gpio_read(&mix->hp_detect);
+ do_gpio_write(&mix->hp_detect, val | 0x80);
+ }
if (mix->lineout_irq >= 0)
enable_irq(mix->lineout_irq);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff