--- /dev/null
+What: /sys/kernel/uids/<uid>/cpu_shares
+Date: December 2007
+Contact: Dhaval Giani <dhaval@linux.vnet.ibm.com>
+ Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
+Description:
+ The /sys/kernel/uids/<uid>/cpu_shares tunable is used
+ to set the cpu bandwidth a user is allowed. This is a
+ propotional value. What that means is that if there
+ are two users logged in, each with an equal number of
+ shares, then they will get equal CPU bandwidth. Another
+ example would be, if User A has shares = 1024 and user
+ B has shares = 2048, User B will get twice the CPU
+ bandwidth user A will. For more details refer
+ Documentation/sched-design-CFS.txt
-This is an explanation of what i2c is, and what is supported in this package.
-
I2C and SMBus
=============
Client
An Algorithm driver contains general code that can be used for a whole class
-of I2C adapters. Each specific adapter driver depends on one algorithm
-driver.
+of I2C adapters. Each specific adapter driver either depends on one algorithm
+driver, or includes its own implementation.
A Driver driver (yes, this sounds ridiculous, sorry) contains the general
code to access some type of device. Each detected device gets its own
data in the Client structure. Usually, Driver and Client are more closely
integrated than Algorithm and Adapter.
-For a given configuration, you will need a driver for your I2C bus (usually
-a separate Adapter and Algorithm driver), and drivers for your I2C devices
-(usually one driver for each device). There are no I2C device drivers
-in this package. See the lm_sensors project http://www.lm-sensors.nu
-for device drivers.
+For a given configuration, you will need a driver for your I2C bus, and
+drivers for your I2C devices (usually one driver for each device).
At this time, Linux only operates I2C (or SMBus) in master mode; you can't
use these APIs to make a Linux system behave as a slave/device, either to
speak a custom protocol or to emulate some other device.
-
-
-Included Bus Drivers
-====================
-Note that only stable drivers are patched into the kernel by 'mkpatch'.
-
-
-Base modules
-------------
-
-i2c-core: The basic I2C code, including the /proc/bus/i2c* interface
-i2c-dev: The /dev/i2c-* interface
-i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers
-
-Algorithm drivers
------------------
-
-i2c-algo-bit: A bit-banging algorithm
-i2c-algo-pcf: A PCF 8584 style algorithm
-i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT)
-
-Adapter drivers
----------------
-
-i2c-elektor: Elektor ISA card (uses i2c-algo-pcf)
-i2c-elv: ELV parallel port adapter (uses i2c-algo-bit)
-i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched)
-i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
-i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
-i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
-i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
-
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
-Last Updated: 2007/09/23
+Last Updated: 2007/11/16
==================================
これは、
-linux-2.6.23/Documentation/HOWTO
+linux-2.6.24/Documentation/HOWTO
の和訳です。
翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/09/19
+翻訳日： 2007/11/10
翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者： 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
新しいドキュメントファイルも追加することを勧めます。
カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの
変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報
-をマニュアルページのメンテナ mtk-manpages@gmx.net に送ることを勧めま
+をマニュアルページのメンテナ mtk.manpages@gmail.com に送ることを勧めま
す。
以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で
NOTE:
This is a version of Documentation/HOWTO translated into korean
-This document is maintained by minchan Kim < minchan.kim@gmail.com>
+This document is maintained by minchan Kim <minchan.kim@gmail.com>
If you find any difference between this document and the original file or
a problem with the translation, please contact the maintainer of this file.
Documentation/HOWTO
의 한글 번역입니다.
-역자： 김민찬 <minchan.kim@gmail.com >
+역자： 김민찬 <minchan.kim@gmail.com>
감수： 이제이미 <jamee.lee@samsung.com>
==================================
이 문서는 커널 개발에 있어 가장 중요한 문서이다. 이 문서는
리눅스 커널 개발자가 되는 법과 리눅스 커널 개발 커뮤니티와 일하는
-법을 담고있다. 커널 프로그래밍의기술적인 측면과 관련된 내용들은
-포함하지 않으려고 하였지만 올바으로 여러분을 안내하는 데 도움이
+법을 담고있다. 커널 프로그래밍의 기술적인 측면과 관련된 내용들은
+포함하지 않으려고 하였지만 올바른 길로 여러분을 안내하는 데는 도움이
될 것이다.
-ì\9d´ 문ì\84\9cì\97\90ì\84\9c ì\98¤ë\9e\98ë\90\9c ê²\83ì\9d\84 ë°\9c견í\95\98ë©´ 문ì\84\9cì\9d\98 ì\95\84ë\9e\98쪽ì\97\90 ë\82\98ì\97´ë\90\9c ë©\94ì\9d¸í\8a¸너에게
+ì\9d´ 문ì\84\9cì\97\90ì\84\9c ì\98¤ë\9e\98ë\90\9c ê²\83ì\9d\84 ë°\9c견í\95\98ë©´ 문ì\84\9cì\9d\98 ì\95\84ë\9e\98쪽ì\97\90 ë\82\98ì\97´ë\90\9c ë©\94ì\9d¸í\85\8cì\9d´너에게
패치를 보내달라.
자, 여러분은 리눅스 커널 개발자가 되는 법을 배우고 싶은가? 아니면
상사로부터"이 장치를 위한 리눅스 드라이버를 작성하시오"라는 말을
-들었는가? 이 문서는 여러분이 겪게 될 과정과 커뮤니티와 일하는 법을
-조언하여 여러분의 목적을 달성하기 위해 필요한 것 모두를 알려주는
-것이다.
+들었는가? 이 문서의 목적은 여러분이 겪게 될 과정과 커뮤니티와 협력하는
+법을 조언하여 여러분의 목적을 달성하기 위해 필요한 것 모두를 알려주기
+위함이다.
-커ë\84\90ì\9d\80 ë\8c\80ë¶\80ë¶\84ì\9d\80 Cë¡\9c ì\9e\91ì\84±ë\90\98ì\97\88ì\96´고 몇몇 아키텍쳐의 의존적인 부분은
-ì\96´ì\85\88ë¸\94리ë¡\9c ì\9e\91ì\84±ë\90\98ì\97\88ë\8b¤. 커ë\84\90 ê°\9cë°\9cì\9d\84 ì\9c\84í\95´ C를 ì\9e\98 ì\9d´í\95´í\95\98ê³ ì\9e\88ì\96´ì\95¼ í\95\9cë\8b¤.
+커ë\84\90ì\9d\80 ë\8c\80ë¶\80ë¶\84ì\9d\80 Cë¡\9c ì\9e\91ì\84±ë\90\98ì\96´ ì\9e\88고 몇몇 아키텍쳐의 의존적인 부분은
+ì\96´ì\85\88ë¸\94리ë¡\9c ì\9e\91ì\84±ë\90\98ì\96´ ì\9e\88ë\8b¤. 커ë\84\90 ê°\9cë°\9cì\9d\84 ì\9c\84í\95´ C를 ì\9e\98 ì\9d´í\95´í\95\98ê³ ì\9e\88ì\96´ì\95¼ í\95\9cë\8b¤.
여러분이 특정 아키텍쳐의 low-level 개발을 할 것이 아니라면
어셈블리(특정 아키텍쳐)는 잘 알아야 할 필요는 없다.
다음의 참고서적들은 기본에 충실한 C 교육이나 수년간의 경험에 견주지는
어떤 참고문서도 있지 않다. 정보를 얻기 위해서는 gcc info (`info gcc`)페이지를
살펴보라.
-여러분은 기존의 개발 커뮤니티와 일하는 법을 배우려고 하고 있다는 것을
-기억하라. 코딩, 스타일, 절차에 관한 훌륭한 표준을 가진 사람들이 모인
+여러분은 기존의 개발 커뮤니티와 협력하는 법을 배우려고 하고 있다는 것을
+기억하라. 코딩, 스타일, 함수에 관한 훌륭한 표준을 가진 사람들이 모인
다양한 그룹이 있다. 이 표준들은 오랜동안 크고 지역적으로 분산된 팀들에
-의해 가장 좋은 방법으로 일하기위하여 찾은 것을 기초로 만들어져왔다.
-그 표준들은 문서화가 잘 되어 있기 때문에 가능한한 미리 많은 표준들에
+의해 가장 좋은 방법으로 일하기 위하여 찾은 것을 기초로 만들어져 왔다.
+그 표준들은 문서화가 잘 되어있기 때문에 가능한한 미리 많은 표준들에
관하여 배우려고 시도하라. 다른 사람들은 여러분이나 여러분의 회사가
일하는 방식에 적응하는 것을 원하지는 않는다.
리눅스 커널 소스 코드는 GPL로 배포(release)되었다. 소스트리의 메인
디렉토리에 있는 라이센스에 관하여 상세하게 쓰여 있는 COPYING이라는
-파일을 봐라.여러분이 라이센스에 관한 더 깊은 문제를 가지고 있다면
+파일을 봐라. 여러분이 라이센스에 관한 더 깊은 문제를 가지고 있다면
리눅스 커널 메일링 리스트에 묻지말고 변호사와 연락하라. 메일링
리스트들에 있는 사람들은 변호사가 아니기 때문에 법적 문제에 관하여
그들의 말에 의지해서는 안된다.
문서
----
-리눅스 커널 소스 트리는 커널 커뮤니티와 일하는 법을 배우기 위한 많은
-ê·\80ì¤\91í\95\9c 문ì\84\9cë\93¤ì\9d\84 ê°\80ì§\80ê³ ì\9e\88ë\8b¤. ì\83\88ë¡\9cì\9a´ 기ë\8a¥ë\93¤ì\9d´ 커ë\84\90ì\97\90 ë\93¤ì\96´ê°\80ê²\8c ë\90 ë\95\8c,
+리눅스 커널 소스 트리는 커널 커뮤니티와 협력하는 법을 배우기위해 훌륭한
+ë\8b¤ì\96\91í\95\9c 문ì\84\9cë\93¤ì\9d\84 ê°\80ì§\80ê³ ì\9e\88ë\8b¤. ì\83\88ë¡\9cì\9a´ 기ë\8a¥ë\93¤ì\9d´ 커ë\84\90ì\97\90 ë\93¤ì\96´ê°\80ê²\8c ë\90 ë\95\8c,
그 기능을 어떻게 사용하는지에 관한 설명을 위하여 새로운 문서 파일을
추가하는 것을 권장한다. 커널이 유저스페이스로 노출하는 인터페이스를
변경하게 되면 변경을 설명하는 메뉴얼 페이지들에 대한 패치나 정보를
-mtk-manpages@gmx.net의 메인트너에게 보낼 것을 권장한다.
+mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
다음은 커널 소스 트리에 있는 읽어야 할 파일들의 리스트이다.
README
Documentation/CodingStyle
이 문서는 리눅스 커널 코딩 스타일과 그렇게 한 몇몇 이유를 설명한다.
모든 새로운 코드는 이 문서에 가이드라인들을 따라야 한다. 대부분의
- ë©\94ì\9d¸í\8a¸너들은 이 규칙을 따르는 패치들만을 받아들일 것이고 많은 사람들이
+ ë©\94ì\9d¸í\85\8cì\9d´너들은 이 규칙을 따르는 패치들만을 받아들일 것이고 많은 사람들이
그 패치가 올바른 스타일일 경우만 코드를 검토할 것이다.
Documentation/SubmittingPatches
- Email 내용들
- Email 양식
- 그것을 누구에게 보낼지
- 이러한 규칙들을 따르는 것이 성공을 보장하진 않는다(왜냐하면 모든
- 패치들은 내용과 스타일에 관하여 면밀히 검토되기 때문이다).
- 그러나 규칙을 따르지 않는다면 거의 성공하지도 못할 것이다.
+ 이러한 규칙들을 따르는 것이 성공(역자주: 패치가 받아들여 지는 것)을
+ 보장하진 않는다(왜냐하면 모든 패치들은 내용과 스타일에 관하여
+ 면밀히 검토되기 때문이다). 그러나 규칙을 따르지 않는다면 거의
+ 성공하지도 못할 것이다.
올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
"The Perfect Patch"
http://linux.yyz.us/patch-format.html
Documentation/stable_api_nonsense.txt
- ì\9d´ 문ì\84\9cë\8a\94 ì\9d\98ë\8f\84ì \81ì\9c¼ë¡\9c 커ë\84\90ì\9d´ ë³\80í\95\98ì§\80 ì\95\8a는 API를 갖지 않도록 결정한
+ ì\9d´ 문ì\84\9cë\8a\94 ì\9d\98ë\8f\84ì \81ì\9c¼ë¡\9c 커ë\84\90ì\9d´ ë¶\88ë³\80í\95\98는 API를 갖지 않도록 결정한
이유를 설명하며 다음과 같은 것들을 포함한다.
- 서브시스템 shim-layer(호환성을 위해?)
- - 운영 체제들 간의 드라이버 이식성
+ - 운영체제들간의 드라이버 이식성
- 커널 소스 트리내에 빠른 변화를 늦추는 것(또는 빠른 변화를 막는 것)
이 문서는 리눅스 개발 철학을 이해하는데 필수적이며 다른 운영체제에서
- 리ë\88\85ì\8a¤ë¡\9c ì\98®ê²¨ì\98¤는 사람들에게는 매우 중요하다.
+ 리ë\88\85ì\8a¤ë¡\9c ì \84í\96¥í\95\98는 사람들에게는 매우 중요하다.
Documentation/SecurityBugs
도와 달라.
Documentation/ManagementStyle
- ì\9d´ 문ì\84\9cë\8a\94 리ë\88\85ì\8a¤ 커ë\84\90 ë©\94ì\9d¸í\8a¸ë\84\88ë\93¤ì\9d´ ì\96´ë\96»ê²\8c ê·¸ë\93¤ì\9d\98 ë°©ë²\95ë¡ ì\9d\98 ì \95ì\8b ì\9d\84
- 어떻게 공유하고 운영하는지를 설명한다. 이것은 커널 개발에 입문하는
+ ì\9d´ 문ì\84\9cë\8a\94 리ë\88\85ì\8a¤ 커ë\84\90 ë©\94ì\9d¸í\85\8cì\9d´ë\84\88ë\93¤ì\9d´ ê·¸ë\93¤ì\9d\98 ë°©ë²\95ë¡ ì\97\90 ë\85¹ì\95\84 ì\9e\88ë\8a\94
+ ì \95ì\8b ì\9d\84 ì\96´ë\96»ê²\8c ê³µì\9c í\95\98ê³ ì\9a´ì\98\81í\95\98ë\8a\94ì§\80를 ì\84¤ëª\85í\95\9cë\8b¤. ì\9d´ê²\83ì\9d\80 커ë\84\90 ê°\9cë°\9cì\97\90 ì\9e\85문í\95\98ë\8a\94
모든 사람들(또는 커널 개발에 작은 호기심이라도 있는 사람들)이
- ì\9d½ì\96´ì\95¼ í\95 ì¤\91ì\9a\94í\95\9c 문ì\84\9cì\9d´ë\8b¤. ì\99\9cë\83\90í\95\98ë©´ ì\9d´ 문ì\84\9cë\8a\94 커ë\84\90 ë©\94ì\9d¸í\8a¸너들의
+ ì\9d½ì\96´ì\95¼ í\95 ì¤\91ì\9a\94í\95\9c 문ì\84\9cì\9d´ë\8b¤. ì\99\9cë\83\90í\95\98ë©´ ì\9d´ 문ì\84\9cë\8a\94 커ë\84\90 ë©\94ì\9d¸í\85\8cì\9d´너들의
독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
때문이다.
Documentation/applying-patches.txt
패치가 무엇이며 그것을 커널의 다른 개발 브랜치들에 어떻게
- 적용하는지에 관하여 자세히 설명 하고 있는 좋은 입문서이다.
+ 적용하는지에 관하여 자세히 설명하고 있는 좋은 입문서이다.
커널은 소스 코드 그 자체에서 자동적으로 만들어질 수 있는 많은 문서들을
가지고 있다. 이것은 커널 내의 API에 대한 모든 설명, 그리고 락킹을
여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수
있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라.
http://janitor.kernelnewbies.org/
-그곳은 시작하기에 아주 딱 좋은 곳이다. 그곳은 리눅스 커널 소스 트리내에
+그곳은 시작하기에 훌륭한 장소이다. 그곳은 리눅스 커널 소스 트리내에
간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이
프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에
반영하기 위한 기본적인 것들을 배우게 될것이며 여러분이 아직 아이디어를
것은 Linux Cross-Reference project이며 그것은 자기 참조 방식이며
소스코드를 인덱스된 웹 페이지들의 형태로 보여준다. 최신의 멋진 커널
코드 저장소는 다음을 통하여 참조할 수 있다.
- http://sosdg.org/~coywolf/lxr/
+ http://users.sosdg.org/~qiyong/lxr/
개발 프로세스
2.6.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v2.6/
디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다.
- 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은
- ë©\94ì\9d¸í\8a¸너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
+ ë©\94ì\9d¸í\85\8cì\9d´너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
몇 주 동안 -mm 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/
- ì\97\90ì\84\9c 참조í\95 ì\88\98 ì\9e\88ë\8b¤)를 ì\82¬ì\9a©í\95\98ë\8a\94 ê²\83ì\9d´ì§\80ë§\8c ì\88\9cì\88\98í\95\9c í\8c¨ì¹\98í\8c\8cì\9d¼ì\9d\98 í\98\95ì\8b\9dì\9c¼ë¡\9c ë³´ë\82´ë\8f\84
+ ì\97\90ì\84\9c 참조í\95 ì\88\98 ì\9e\88ë\8b¤)를 ì\82¬ì\9a©í\95\98ë\8a\94 ê²\83ì\9d´ì§\80ë§\8c ì\88\9cì\88\98í\95\9c í\8c¨ì¹\98í\8c\8cì\9d¼ì\9d\98 í\98\95ì\8b\9dì\9c¼ë¡\9c ë³´ë\82´ë\8a\94
것도 무관하다.
- 2주 후에 -rc1 커널이 배포되며 지금부터는 전체 커널의 안정성에 영향을
- ë¯¸ì¹ ì\88\98 ì\9e\88ë\8a\94 ì\83\88ë¡\9cì\9a´ 기ë\8a¥ë\93¤ì\9d\84 í\8f¬í\95¨í\95\98ì§\80 ì\95\8aë\8a\94 í\8c¨ì¹\98ë\93¤ë§\8cì\9d\84 추가될 수 있다.
+ ë¯¸ì¹ ì\88\98 ì\9e\88ë\8a\94 ì\83\88ë¡\9cì\9a´ 기ë\8a¥ë\93¤ì\9d\84 í\8f¬í\95¨í\95\98ì§\80 ì\95\8aë\8a\94 í\8c¨ì¹\98ë\93¤ë§\8cì\9d´ 추가될 수 있다.
완전히 새로운 드라이버(혹은 파일시스템)는 -rc1 이후에만 받아들여진다는
것을 기억해라. 왜냐하면 변경이 자체내에서만 발생하고 추가된 코드가
드라이버 외부의 다른 부분에는 영향을 주지 않으므로 그런 변경은
- 퇴보(regression)를 일으킬 만한 위험을 가지고 있지 않기 때문이다. -rc1이
+ 회귀(역자주: 이전에는 존재하지 않았지만 새로운 기능추가나 변경으로 인해
+ 생겨난 버그)를 일으킬 만한 위험을 가지고 있지 않기 때문이다. -rc1이
배포된 이후에 git를 사용하여 패치들을 Linus에게 보낼수 있지만 패치들은
공식적인 메일링 리스트로 보내서 검토를 받을 필요가 있다.
- - 새로운 -rc는 Linus는 현재 git tree가 테스트 하기에 충분히 안정된 상태에
+ - 새로운 -rc는 Linus가 현재 git tree가 테스트 하기에 충분히 안정된 상태에
있다고 판단될 때마다 배포된다. 목표는 새로운 -rc 커널을 매주 배포하는
것이다.
- - 이러한 프로세스는 커널이 "준비"되었다고 여겨질때까지 계속된다.
+ - 이러한 프로세스는 커널이 "준비(ready)"되었다고 여겨질때까지 계속된다.
프로세스는 대체로 6주간 지속된다.
- - 각 -rc 배포에 있는 알려진 퇴보의 목록들은 다음 URI에 남겨진다.
+ - 각 -rc 배포에 있는 알려진 회귀의 목록들은 다음 URI에 남겨진다.
http://kernelnewbies.org/known_regressions
커널 배포에 있어서 언급할만한 가치가 있는 리눅스 커널 메일링 리스트의
Andrew Morton의 글이 있다.
- "커ë\84\90ì\9d´ ì\96¸ì \9c ë°°í\8f¬ë\90 ì§\80ë\8a\94 ì\95\84무ë¡\9c 모른다. 왜냐하면 배포는 알려진
+ "커ë\84\90ì\9d´ ì\96¸ì \9c ë°°í\8f¬ë\90 ì§\80ë\8a\94 ì\95\84무ë\8f\84 모른다. 왜냐하면 배포는 알려진
버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라
- 배포되는 것은 아니기 때문이다."
+ 배포되는 것은 아니기 때문이다."
2.6.x.y - 안정 커널 트리
------------------------
4 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 2.6.x
-커ë\84\90ì\97\90ì\84\9c ë°\9c견ë\90\9c í\81° í\87´ë³´들이나 보안 문제들 중 비교적 작고 중요한 수정들을
+커ë\84\90ì\97\90ì\84\9c ë°\9c견ë\90\9c í\81° í\9a\8cê·\80들이나 보안 문제들 중 비교적 작고 중요한 수정들을
포함한다.
이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며,
-개발/실험적 버젼을 테스트하는 것을 돕는데는 별로 관심이 없다.
+개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다.
-어떤 2.6.x.y 커널도 사용가능하지 않다면 그때는 가장 높은 숫자의 2.6.x
+어떤 2.6.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 2.6.x
커널이 현재의 안정 커널이다.
2.6.x.y는 "stable" 팀<stable@kernel.org>에 의해 관리되며 거의 매번 격주로
서브시스템 커널 트리와 패치들을 가져와서 리눅스 커널 메일링 리스트로
온 많은 패치들과 한데 묶는다. 이 트리는 새로운 기능들과 패치들을 위한
장소를 제공하는 역할을 한다. 하나의 패치가 -mm에 한동안 있으면서 그 가치가
-ì¦\9dëª\85ë\90\98ê²\8c ë\90\98ë©´ Andrewë\82\98 ì\84\9cë¸\8cì\8b\9cì\8a¤í\85\9c ë©\94ì\9d¸í\8a¸너는 그것을 메인라인에 포함시키기
+ì¦\9dëª\85ë\90\98ê²\8c ë\90\98ë©´ Andrewë\82\98 ì\84\9cë¸\8cì\8b\9cì\8a¤í\85\9c ë©\94ì\9d¸í\85\8cì\9d´너는 그것을 메인라인에 포함시키기
위하여 Linus에게 보낸다.
커널 트리에 포함하고 싶은 모든 새로운 패치들은 Linus에게 보내지기 전에
- ACPI development tree, Len Brown <len.brown@intel.com >
git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
- - Block development tree, Jens Axboe <axboe@suse.de>
+ - Block development tree, Jens Axboe <jens.axboe@oracle.com>
git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
- DRM development tree, Dave Airlie <airlied@linux.ie>
kernel bugzilla를 사용하는 자세한 방법은 다음을 참조하라.
http://test.kernel.org/bugzilla/faq.html
-메인 커널 소스 디렉토리에 있는 REPORTING-BUGS 파일은 커널 버그일 것 같은
-것을 보고하는는 법에 관한 좋은 템플릿이고 문제를 추적하기 위해서 커널
+메인 커널 소스 디렉토리에 있는 REPORTING-BUGS 파일은 커널 버그라고 생각되는
+것을 보고하는 방법에 관한 좋은 템플릿이며 문제를 추적하기 위해서 커널
개발자들이 필요로 하는 정보가 무엇들인지를 상세히 설명하고 있다.
점수를 얻을 수 있는 가장 좋은 방법중의 하나이다. 왜냐하면 많은 사람들은
다른 사람들의 버그들을 수정하기 위하여 시간을 낭비하지 않기 때문이다.
-이미 보고된 버그 리포트들을 가지고 작업하기 위해서 http://bugzilla.kernelorg를
+이미 보고된 버그 리포트들을 가지고 작업하기 위해서 http://bugzilla.kernel.org를
참조하라. 여러분이 앞으로 생겨날 버그 리포트들의 조언자가 되길 원한다면
bugme-new 메일링 리스트나(새로운 버그 리포트들만이 이곳에서 메일로 전해진다)
bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메일로 전해진다)
웹상의 많은 다른 곳에도 메일링 리스트의 아카이브들이 있다.
이러한 아카이브들을 찾으려면 검색 엔진을 사용하라. 예를 들어:
http://dir.gmane.org/gmane.linux.kernel
-여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 ë\8c\80í\95\9c
-것을 아카이브에서 먼저 찾기를 강력히 권장한다. 이미 상세하게 토론된 많은
+여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 ê´\80í\95\9c
+것을 아카이브에서 먼저 찾아보기를 강력히 권장한다. 이미 상세하게 토론된 많은
것들이 메일링 리스트의 아카이브에 기록되어 있다.
각각의 커널 서브시스템들의 대부분은 자신들의 개발에 관한 노력들로 이루어진
무엇보다도 메일링 리스트의 다른 구독자들에게 보여주려 한다는 것을 기억하라.
-커뮤니티와 일하는 법
+커뮤니티와 협력하는 법
--------------------
커널 커뮤니티의 목적은 가능한한 가장 좋은 커널을 제공하는 것이다. 여러분이
올바른 방향의 해결책으로 이끌어갈 의지가 있다면 받아들여질 것이라는 점을
기억하라.
-여러분의 첫 패치에 여러분이 수정해야하는 십여개 정도의 회신이 오는
+여러분의 첫 패치에 여러분이 수정해야하는 십여개 정도의 회신이 오는
경우도 흔하다. 이것은 여러분의 패치가 받아들여지지 않을 것이라는 것을
의미하는 것이 아니고 개인적으로 여러분에게 감정이 있어서 그러는 것도
아니다. 간단히 여러분의 패치에 제기된 문제들을 수정하고 그것을 다시
커널 커뮤니티는 가장 전통적인 회사의 개발 환경과는 다르다. 여기에 여러분들의
문제를 피하기 위한 목록이 있다.
여러분들이 제안한 변경들에 관하여 말할 때 좋은 것들 :
- - " 이것은 여러 문제들을 해겹합니다."
+ - "이것은 여러 문제들을 해겹합니다."
- "이것은 2000 라인의 코드를 제거합니다."
- "이것은 내가 말하려는 것에 관해 설명하는 패치입니다."
- "나는 5개의 다른 아키텍쳐에서 그것을 테스트했슴으로..."
- - "ì\97¬ê¸°ì\97\90 ì\9d¼ë ¨ì\9d\98 ì\9e\91ì\9d\80 í\8c¨ì¹\98ë\93¤ì\9d´ ì\9e\88ì\8aµ음로..."
- - "ì\9d´ê²\83ì\9d\80 ì\9d¼ë°\98ì \81ì\9d¸ 머ì\8b ì\97\90ì\84\9c ì\84±ë\8a¥ì\9d\84 í\96¥ì\83\81ì\8b\9cí\82¤ë¯\80로..."
+ - "ì\97¬ê¸°ì\97\90 ì\9d¼ë ¨ì\9d\98 ì\9e\91ì\9d\80 í\8c¨ì¹\98ë\93¤ì\9d´ ì\9e\88ì\8a´음로..."
+ - "ì\9d´ê²\83ì\9d\80 ì\9d¼ë°\98ì \81ì\9d¸ 머ì\8b ì\97\90ì\84\9c ì\84±ë\8a¥ì\9d\84 í\96¥ì\83\81ì\8b\9cí\82´ì\9c¼로..."
여러분들이 말할 때 피해야 할 좋지 않은 것들 :
- "우리를 그것을 AIT/ptx/Solaris에서 이러한 방법으로 했다. 그러므로 그것은 좋은 것임에 틀립없다..."
- "이것은 우리의 엔터프라이즈 상품 라인을 위한 것이다."
- "여기에 나의 생각을 말하고 있는 1000 페이지 설계 문서가 있다."
- "나는 6달동안 이것을 했으니..."
- - "ì\97¬ê¸°ì\84¸ 5000라인 짜리 패치가 있으니..."
+ - "ì\97¬ê¸°ì\97\90 5000라인 짜리 패치가 있으니..."
- "나는 현재 뒤죽박죽인 것을 재작성했다. 그리고 여기에..."
- "나는 마감시한을 가지고 있으므로 이 패치는 지금 적용될 필요가 있다."
없다는 것이다. 리눅스 커널의 작업 환경에서는 단지 이메일 주소만
알수 있기 때문에 여성과 소수 민족들도 모두 받아들여진다. 국제적으로
일하게 되는 측면은 사람의 이름에 근거하여 성별을 추측할 수 없게
-하기때문에 차별을 없애는 데 도움을 준다. Andrea라는 이름을 가진 남자와
+하기때문에 차별을 없애는 데 도움을 준다. Andrea라는 이름을 가진 남자와
Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅스 커널에서
작업하며 생각을 표현해왔던 대부분의 여성들은 긍정적인 경험을 가지고
있다.
언어 장벽은 영어에 익숙하지 않은 몇몇 사람들에게 문제가 될 수도 있다.
- 언어의 훌륭한 구사는 메일링 리스트에서 올바르게 자신의 생각을
+언어의 훌륭한 구사는 메일링 리스트에서 올바르게 자신의 생각을
표현하기 위하여 필요하다. 그래서 여러분은 이메일을 보내기 전에
영어를 올바르게 사용하고 있는지를 체크하는 것이 바람직하다.
여러분의 변경을 나누어라
------------------------
-리눅스 커널 커뮤니티는 한꺼번에 굉장히 큰 코드의 묶음을 쉽게
+리눅스 커널 커뮤니티는 한꺼번에 굉장히 큰 코드의 묶음(chunk)을 쉽게
받아들이지 않는다. 변경은 적절하게 소개되고, 검토되고, 각각의
부분으로 작게 나누어져야 한다. 이것은 회사에서 하는 것과는 정확히
반대되는 것이다. 여러분들의 제안은 개발 초기에 일찍이 소개되야 한다.
그래서 여러분들은 자신이 하고 있는 것에 관하여 피드백을 받을 수 있게
된다. 커뮤니티가 여러분들이 커뮤니티와 함께 일하고 있다는 것을
-ë\8a\90ë\81¼ë\8f\84ë¡\9d ë§\8cë\93¤ê³ 커뮤ë\8b\88í\8b°ê°\80 ì\97¬ë\9f¬ë¶\84ì\9d\98 기ë\8a¥ì\9d\84 ì\9c\84í\95\9c ì\93°ë \88기 ì\9e¥ì\9c¼ë¡\9cì\84\9c
+ë\8a\90ë\81¼ë\8f\84ë¡\9d ë§\8cë\93¤ê³ 커뮤ë\8b\88í\8b°ê°\80 ì\97¬ë\9f¬ë¶\84ì\9d\98 기ë\8a¥ì\9d\84 ì\9c\84í\95\9c ì\93°ë \88기 ì\9e¥ì\9c¼ë¡\9cì\8d¨
사용되지 않고 있다는 것을 느끼게 하자. 그러나 메일링 리스트에 한번에
50개의 이메일을 보내지는 말아라. 여러분들의 일련의 패치들은 항상
더 작아야 한다.
1) 작은 패치들은 여러분의 패치들이 적용될 수 있는 확률을 높여준다.
왜냐하면 다른 사람들은 정확성을 검증하기 위하여 많은 시간과 노력을
- ë\93¤ì\9d´ê¸°ë¥¼ ì\9b\90í\95\98ì§\80 ì\95\8aë\8a\94ë\8b¤. 5ì¤\84ì\9d\98 í\8c¨ì¹\98ë\8a\94 ë©\94ì\9d¸í\8a¸너가 거의 몇 초간 힐끗
+ ë\93¤ì\9d´ê¸°ë¥¼ ì\9b\90í\95\98ì§\80 ì\95\8aë\8a\94ë\8b¤. 5ì¤\84ì\9d\98 í\8c¨ì¹\98ë\8a\94 ë©\94ì\9d¸í\85\8cì\9d´너가 거의 몇 초간 힐끗
보면 적용될 수 있다. 그러나 500 줄의 패치는 정확성을 검토하기 위하여
몇시간이 걸릴 수도 있다(걸리는 시간은 패치의 크기 혹은 다른 것에
비례하여 기하급수적으로 늘어난다).
간결하고 가장 뛰어난 답을 보길 원한다. 훌륭한 학생은 이것을 알고
마지막으로 답을 얻기 전 중간 과정들을 제출하진 않는다.
- 커ë\84\90 ê°\9cë°\9cë\8f\84 ë§\88ì°¬ê°\80ì§\80ì\9d´ë\8b¤. ë©\94ì\9d¸í\8a¸너들과 검토하는 사람들은 문제를
+ 커ë\84\90 ê°\9cë°\9cë\8f\84 ë§\88ì°¬ê°\80ì§\80ì\9d´ë\8b¤. ë©\94ì\9d¸í\85\8cì\9d´너들과 검토하는 사람들은 문제를
풀어나가는 과정속에 숨겨진 과정을 보길 원하진 않는다. 그들은
간결하고 멋진 답을 보길 원한다."
-커뮤ë\8b\88í\8b°ì\99\80 í\95¨ê»\98 ì\9d¼í\95\98ë©° ë\9b°ì\96´ë\82\9c ë\8bµì\9d\84 ì°¾ê³ ì\97¬ë\9f¬ë¶\84ë\93¤ì\9d\98 ì\99\84ì\84±ë\90\98ì§\80 ì\95\8aì\9d\80 ì\9d¼들
-사이에 균형을 유지해야 하는 어려움이 있을 수 있다. 그러므로 프로세스의
-ì´\88ë°\98ì\97\90 ì\97¬ë\9f¬ë¶\84ì\9d\98 ì\9d¼을 향상시키기위한 피드백을 얻는 것 뿐만 아니라
+커뮤ë\8b\88í\8b°ì\99\80 í\98\91ë ¥í\95\98ë©° ë\9b°ì\96´ë\82\9c ë\8bµì\9d\84 ì°¾ë\8a\94 ê²\83ê³¼ ì\97¬ë\9f¬ë¶\84ë\93¤ì\9d\98 ë\81\9dë§\88ì¹\98ì§\80 못í\95\9c ì\9e\91ì\97\85들
+사이에 균형을 유지해야 하는 것은 어려울지도 모른다. 그러므로 프로세스의
+ì´\88ë°\98ì\97\90 ì\97¬ë\9f¬ë¶\84ì\9d\98 ì\9e\91ì\97\85을 향상시키기위한 피드백을 얻는 것 뿐만 아니라
여러분들의 변경들을 작은 묶음으로 유지해서 심지어는 여러분의 작업의
-모든 부분이 지금은 포함될 준비가 되어있지 않지만 작은 부분은 이미
+모든 부분이 지금은 포함될 준비가 되어있지 않지만 작은 부분은 벌써
받아들여질 수 있도록 유지하는 것이 바람직하다.
-ë\98\90í\95\9c ì\99\84ì\84±ë\90\98ì§\80 ì\95\8aì\95\98ê³ "ë\82\98ì¤\91ì\97\90 ì\88\98ì \95ë\90 ê²\83ì\9d´ë\8b¤." ì\99\80 ê°\99ì\9d\80 ê²\83ë\93¤ì\9d\80 포함하는
+ë\98\90í\95\9c ì\99\84ì\84±ë\90\98ì§\80 ì\95\8aì\95\98ê³ "ë\82\98ì¤\91ì\97\90 ì\88\98ì \95ë\90 ê²\83ì\9d´ë\8b¤." ì\99\80 ê°\99ì\9d\80 ê²\83ë\93¤ì\9d\84 포함하는
패치들은 받아들여지지 않을 것이라는 점을 유념하라.
변경을 정당화해라
여러분들의 나누어진 패치들을 리눅스 커뮤니티가 왜 반영해야 하는지를
알도록 하는 것은 매우 중요하다. 새로운 기능들이 필요하고 유용하다는
-것은 반드시 그에 맞는 이유가 있어야 한다.
+것은 반드시 그에 합당한 이유가 있어야 한다.
변경을 문서화해라
것이다. 그리고 항상 그 내용을 보길 원하는 모든 사람들을 위해 보존될
것이다. 패치는 완벽하게 다음과 같은 내용들을 포함하여 설명해야 한다.
- 변경이 왜 필요한지
- - í\8c¨ì¹\98ì\97\90 ê´\80í\95\9c ì \84ì²´ ì\84¤ê³\84 ì\96´í\94\84ë¡\9cì¹\98
+ - í\8c¨ì¹\98ì\97\90 ê´\80í\95\9c ì \84ì²´ ì\84¤ê³\84 ì \91ê·¼(approach)
- 구현 상세들
- 테스트 결과들
이 모든 것을 하는 것은 매우 어려운 일이다. 완벽히 소화하는 데는 적어도 몇년이
-걸릴 ì\88\98ë\8f\84 ì\9e\88ë\8b¤. ë§\8eì\9d\80 ì\9d¸ë\82´ì\99\80 ê²°ì\9d\98ê°\80 필요한 계속되는 개선의 과정이다. 그러나
+걸릴 ì\88\98ë\8f\84 ì\9e\88ë\8b¤. ë§\8eì\9d\80 ì\9d¸ë\82´ì\99\80 ê²°ì\8b¬ì\9d´ 필요한 계속되는 개선의 과정이다. 그러나
가능한한 포기하지 말라. 많은 사람들은 이전부터 해왔던 것이고 그 사람들도
정확하게 여러분들이 지금 서 있는 그 곳부터 시작했었다.
-ë©\94ì\9d¸í\8a¸너: Greg Kroah-Hartman <greg@kroah.com>
+ë©\94ì\9d¸í\85\8cì\9d´너: Greg Kroah-Hartman <greg@kroah.com>
--- /dev/null
+NOTE:
+This is a version of Documentation/stable_api_nonsense.txt translated
+into korean
+This document is maintained by barrios <minchan.kim@gmail.com>
+If you find any difference between this document and the original file or
+a problem with the translation, please contact the maintainer of this file.
+
+Please also note that the purpose of this file is to be easier to
+read for non English (read: korean) speakers and is not intended as
+a fork. So if you have any comments or updates for this file please
+try to update the original English file first.
+
+==================================
+이 문서는
+Documentation/stable_api_nonsense.txt
+의 한글 번역입니다.
+
+역자： 김민찬 <minchan.kim@gmail.com>
+감수： 이제이미 <jamee.lee@samsung.com>
+==================================
+
+리눅스 커널 드라이버 인터페이스
+(여러분들의 모든 질문에 대한 답 그리고 다른 몇가지)
+
+Greg Kroah-Hartman <greg@kroah.com>
+
+이 문서는 리눅스가 왜 바이너리 커널 인터페이스를 갖지 않는지, 왜 변하지
+않는(stable) 커널 인터페이스를 갖지 않는지를 설명하기 위해 쓰여졌다.
+이 문서는 커널과 유저공간 사이의 인터페이스가 아니라 커널 내부의
+인터페이스들을 설명하고 있다는 것을 유념하라. 커널과 유저공간 사이의
+인터페이스는 응용프로그램이 사용하는 syscall 인터페이스이다. 그 인터페이스는
+오랫동안 거의 변하지 않았고 앞으로도 변하지 않을 것이다. 나는 pre 0.9에서
+만들어졌지만 최신의 2.6 커널 배포에서도 잘 동작하는 프로그램을 가지고
+있다. 이 인터페이스는 사용자와 응용프로그램 개발자들이 변하지 않을 것이라고
+여길수 있는 것이다.
+
+
+초록
+----
+여러분은 변하지 않는 커널 인터페이스를 원한다고 생각하지만 실제로는
+그렇지 않으며 심지어는 그것을 알아채지 못한다. 여러분이 원하는 것은
+안정되게 실행되는 드라이버이며 드라이버가 메인 커널 트리에 있을 때
+그런 안정적인 드라이버를 얻을 수 있게 된다. 또한 여러분의 드라이버가
+메인 커널 트리에 있다면 다른 많은 좋은 이점들을 얻게 된다. 그러한 것들이
+리눅스를 강건하고, 안정적이며, 성숙한 운영체제로 만들어 놓음으로써
+여러분들로 하여금 바로 리눅스를 사용하게 만드는 이유이다.
+
+
+소개
+----
+
+커널 내부의 인터페이스가 바뀌는 것을 걱정하며 커널 드라이버를 작성하고
+싶어하는 사람은 정말 이상한 사람이다. 세상의 대다수의 사람들은 이 인터페이스를
+보지못할 것이며 전혀 걱정하지도 않는다.
+
+먼저, 나는 closed 소스, hidden 소스, binary blobs, 소스 wrappers, 또는 GPL로
+배포되었지만 소스 코드를 갖고 있지 않은 커널 드라이버들을 설명하는 어떤 다른
+용어들에 관한 어떤 법적인 문제에 관해서는 언급하지 않을 것이다. 어떤 법적인
+질문들을 가지고 있다면 변호사와 연락하라. 나는 프로그래머이므로 여기서 기술적인
+문제들만을 설명하려고 한다. (법적인 문제를 경시하는 것은 아니다. 그런 문제들은
+엄연히 현실에 있고 여러분들은 항상 그 문제들을 인식하고 있을 필요는 있다.)
+
+자, 두가지의 주요 주제가 있다. 바이너리 커널 인터페이스들과 변하지 않는
+커널 소스 인터페이들. 그것들은 서로 의존성을 가지고 있지만 바이너리
+문제를 먼저 풀고 넘어갈 것이다.
+
+
+
+바이너리 커널 인터페이스
+------------------------
+우리가 변하지 않는 커널 소스 인터페이스를 가지고 있다고 가정하자. 그러면
+바이너리 인터페이스 또한 자연적으로 변하지 않을까? 틀렸다. 리눅스 커널에
+관한 다음 사실들을 생각해보라.
+ - 여러분들이 사용하는 C 컴파일러의 버젼에 따라 다른 커널 자료 구조들은
+ 다른 alignmnet들을 갖게 될것이고 다른 방법으로(함수들을 inline으로
+ 했느냐, 아니냐) 다른 함수들을 포함하는 것도 가능한다. 중요한 것은
+ 개별적인 함수 구성이 아니라 자료 구조 패딩이 달라진다는 점이다.
+ - 여러분이 선택한 커널 빌드 옵션에 따라서 커널은 다양한 것들을 가정할
+ 수 있다.
+ - 다른 구조체들은 다른 필드들을 포함할 수 있다.
+ - 몇몇 함수들은 전혀 구현되지 않을 수도 있다(즉, 몇몇 lock들은
+ non-SMP 빌드에서는 사라져 버릴수도 있다).
+ - 커널내에 메모리는 build optoin들에 따라 다른 방법으로 align될수
+ 있다.
+ - 리눅스는 많은 다양한 프로세서 아키텍쳐에서 실행된다. 한 아키텍쳐의
+ 바이너리 드라이버를 다른 아키텍쳐에서 정상적으로 실행시킬 방법은
+ 없다.
+
+커널을 빌드했던 C 컴파일러와 정확하게 같은 것을 사용하고 정확하게 같은
+커널 구성(configuration)을 사용하여 여러분들의 모듈을 빌드하면 간단히
+많은 문제들을 해결할 수 있다. 이렇게 하는 것은 여러분들이 하나의 리눅스
+배포판의 하나의 배포 버젼을 위한 모듈만을 제공한다면 별일 아닐 것이다.
+그러나 각기 다른 리눅스 배포판마다 한번씩 빌드하는 수를 각 리눅스 배포판마다
+제공하는 다른 릴리즈의 수와 곱하게 되면 이번에는 각 릴리즈들의 다른 빌드
+옵션의 악몽과 마주하게 것이다. 또한 각 리눅스 배포판들은 다른 하드웨어
+종류에(다른 프로세서 타입과 다른 옵션들) 맞춰져 있는 많은 다른 커널들을
+배포한다. 그러므로 한번의 배포에서조차 여러분들의 모듈은 여러 버젼을
+만들 필요가 있다.
+
+나를 믿어라. 여러분들은 이러한 종류의 배포를 지원하려고 시도한다면 시간이
+지나면 미칠지경이 될 것이다. 난 이러한 것을 오래전에 아주 어렵게 배웠다...
+
+
+
+변하지않는 커널 소스 인터페이스들
+---------------------------------
+
+리눅스 커널 드라이버를 계속해서 메인 커널 트리에 반영하지 않고
+유지보수하려고 하는 사름들과 이 문제를 논의하게 되면 훨씬 더
+"논란의 여지가 많은" 주제가 될 것이다.
+
+리눅스 커널 개발은 끊임없이 빠른 속도로 이루어지고 있으며 결코
+느슨해진 적이 없다. 커널 개발자들이 현재 인터페이스들에서 버그를
+발견하거나 무엇인가 할수 있는 더 좋은 방법을 찾게 되었다고 하자.
+그들이 발견한 것을 실행한다면 아마도 더 잘 동작하도록 현재 인터페이스들을
+수정하게 될 것이다. 그들이 그런 일을 하게되면 함수 이름들은 변하게 되고,
+구조체들은 늘어나거나 줄어들게 되고, 함수 파라미터들은 재작업될 것이다.
+이러한 일이 발생되면 커널 내에 이 인터페이스를 사용했던 인스턴스들이 동시에
+수정될 것이며 이러한 과정은 모든 것이 계속해서 올바르게 동작할 것이라는
+것을 보장한다.
+
+이러한 것의 한 예로써, 커널 내부의 USB 인터페이스들은 이 서브시스템이
+생긴 이후로 적어도 3번의 다른 재작업을 겪었다. 이 재작업들은 많은 다른
+문제들을 풀었다.
+ - 데이터 스트림들의 동기적인 모델에서 비동기적인 모델로의 변화. 이것은
+ 많은 드라이버들의 복잡성을 줄이고 처리량을 향상시켜 현재는 거의 모든
+ USB 장치들의 거의 최대 속도로 실행되고 있다.
+ - USB 드라이버가 USB 코어로부터 데이터 패킷들을 할당받로록 한 변경으로
+ 인해서 지금의 모든 드라이버들은 많은 문서화된 데드락을 수정하기 위하여
+ USB 코어에게 더 많은 정보를 제공해야만 한다.
+
+이것은 오랫동안 자신의 오래된 USB 인터페이스들을 유지해야 하는 closed 운영체제들과는
+완전히 반대되는 것이다. closed된 운영체제들은 새로운 개발자들에게 우연히 낡은
+인터페이스를 사용하게 할 기회를 주게되며, 적절하지 못한 방법으로 처리하게 되어
+운영체제의 안정성을 해치는 문제를 야기하게 된다.
+
+이 두가지의 예들 모두, 모든 개발자들은 꼭 이루어져야 하는 중요한 변화들이라고
+동의를 하였고 비교적 적은 고통으로 변경되어졌다. 리눅스가 변하지 않는 소스
+인터페이스를 고집한다면, 새로운 인터페이스가 만들어지게 되며 반면 기존의 오래된
+것들, 그리고 깨진 것들은 계속해서 유지되어야 하며 이러한 일들은 USB 개발자들에게
+또 다른 일거리를 주게 된다. 모든 리눅스 USB 개발자들에게 자신의 그들의 업무를
+마친 후 시간을 투자하여 아무 득도 없는 무료 봉사를 해달라고 하는 것은 가능성이
+희박한 일이다.
+
+보안 문제 역시 리눅스에게는 매우 중요하다. 보안 문제가 발견되면 그것은
+매우 짧은 시간 안에 수정된다. 보안 문제는 그 문제를 해결하기 위하여
+여러번 내부 커널 인터페이스들을 재작업하게 만들었다. 이러한 문제가
+발생하였을 때 그 인터페이스들을 사용하는 모든 드라이버들도 동시에
+수정되어 보안 문제가 앞으로 갑작스럽게 생기지는 않을 것이라는 것을
+보장한다. 내부 인터페이스들의 변경이 허락되지 않으면 이러한 종류의 보안
+문제를 수정하고 그것이 다시 발생하지 않을 것이라고 보장하는 것은 가능하지
+않을 것이다.
+
+커널 인터페이스들은 계속해서 정리되고 있다. 현재 인터페이스를 사용하는
+사람이 한명도 없다면 그것은 삭제된다. 이것은 커널이 가능한한 가장 작게
+유지되며 존재하는 모든 가능성이 있는 인터페이스들이 테스트된다는 것을
+보장한다(사용되지 않는 인터페이스들은 유효성 검증을 하기가 거의 불가능하다).
+
+
+무엇을 해야 하나
+---------------
+자, 여러분이 메인 커널 트리에 있지 않은 리눅스 커널 드라이버를 가지고
+있다면 여러분은 즉, 개발자는 무엇을 해야 하나? 모든 배포판마다 다른
+커널 버젼을 위한 바이너리 드라이버를 배포하는 것은 악몽이며 계속해서
+변하고 있는 커널 인터페이스들의 맞처 유지보수하려고 시도하는 것은 힘든
+일이다.
+
+간단하다. 여러분의 커널 드라이버를 메인 커널 트리에 반영하라(우리는 여기서
+GPL을 따르는 배포 드라이버에 관해 얘기하고 있다는 것을 상기하라. 여러분의
+코드가 이러한 분류에 해당되지 않는다면 행운을 빈다. 여러분 스스로 어떻게든
+해야만 한다). 여러분의 드라이버가 트리에 있게되면 커널 인터페이스가
+변경되더라도 가장 먼저 커널에 변경을 가했던 사람에 의해서 수정될 것이다.
+이것은 여러분의 드라이버가 여러분의 별다른 노력없이 항상 빌드가 가능하며
+동작하는 것을 보장한다.
+
+메인 커널 트리에 여러분의 드라이버를 반영하면 얻게 되는 장점들은 다음과 같다.
+ - 관리의 드는 비용(원래 개발자의)은 줄어줄면서 드라이버의 질은 향상될 것이다.
+ - 다른 개발자들이 여러분의 드라이버에 기능들을 추가 할 것이다.
+ - 다른 사람들은 여러분의 드라이버에 버그를 발견하고 수정할 것이다.
+ - 다른 사람들은 여러분의 드라이버의 개선점을 찾을 줄 것이다.
+ - 외부 인터페이스 변경으로 인해 여러분의 드라이버의 수정이 필요하다면 다른
+ 사람들이 드라이버를 업데이트할 것이다.
+ - 여러분의 드라이버는 별다른 노력 없이 모든 리눅스 배포판에 자동적으로
+ 추가될 것이다.
+
+리눅스는 다른 운영 체제보다 "쉽게 쓸수 있는(out of the box)" 많은 다른 장치들을
+지원하고 어떤 다른 운영 체제보다 다양한 아키텍쳐위에서 이러한 장치들을 지원하기 때문에
+이러한 증명된 개발 모델은 틀림없이 바로 가고 있는 것이다.
+
+
+
+------
+
+이 문서의 초안을 검토해주고 코멘트 해준 Randy Dunlap, Andrew Morton, David Brownell,
+Hanna Linder, Robert Love, 그리고 Nishanth Aravamudan에게 감사한다.
See http://linux-net.osdl.org/index.php/Bridge for general information
on how to get bridging working.
-- You can also create an inter-guest network using
- "--sharenet=<filename>": any two guests using the same file are on
- the same network. This file is created if it does not exist.
-
There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
Good luck!
autoconfiguration.
The <autoconf> parameter can appear alone as the value to the `ip'
- parameter (without all the ':' characters before) in which case auto-
- configuration is used.
+ parameter (without all the ':' characters before). If the value is
+ "ip=off" or "ip=none", no autoconfiguration will take place, otherwise
+ autoconfiguration will take place. The most common way to use this
+ is "ip=dhcp".
+
+ Note that "ip=off" is not the same thing as "ip=::::::off", because in
+ the latter autoconfiguration will take place if any of DHCP, BOOTP or RARP
+ are compiled in the kernel.
<client-ip> IP address of the client.
into the kernel will be used, regardless of the value of
this option.
- off or none: don't use autoconfiguration (default)
+ off or none: don't use autoconfiguration
on or any: use any protocol available in the kernel
dhcp: use DHCP
bootp: use BOOTP
- oom_kill_allocating_task
- mmap_min_address
- numa_zonelist_order
+- nr_hugepages
+- nr_overcommit_hugepages
==============================================================
Otherwise, "zone" order will be selected. Default order is recommended unless
this is causing problems for your system/application.
+
+==============================================================
+
+nr_hugepages
+
+Change the minimum size of the hugepage pool.
+
+See Documentation/vm/hugetlbpage.txt
+
+==============================================================
+
+nr_overcommit_hugepages
+
+Change the maximum size of the hugepage pool. The maximum is
+nr_hugepages + nr_overcommit_hugepages.
+
+See Documentation/vm/hugetlbpage.txt
+++ /dev/null
-
- Parallel link cable for Texas Instruments handhelds
- ===================================================
-
-
-Author: Romain Lievin
-Homepage: http://lpg.ticalc.org/prj_tidev/index.html
-
-
-INTRODUCTION:
-
-This is a driver for the very common home-made parallel link cable, a cable
-designed for connecting TI8x/9x graphing calculators (handhelds) to a computer
-or workstation (Alpha, Sparc). Given that driver is built on parport, the
-parallel port abstraction layer, this driver is architecture-independent.
-
-It can also be used with another device plugged on the same port (such as a
-ZIP drive). I have a 100MB ZIP and both of them work fine!
-
-If you need more information, please visit the 'TI drivers' homepage at the URL
-above.
-
-WHAT YOU NEED:
-
-A TI calculator and a program capable of communicating with your calculator.
-
-TiLP will work for sure (since I am its developer!). yal92 may be able to use
-it by changing tidev for tipar (may require some hacking...).
-
-HOW TO USE IT:
-
-You must have first compiled parport support (CONFIG_PARPORT_DEV): either
-compiled in your kernel, either as a module.
-
-Next, (as root):
-
- modprobe parport
- modprobe tipar
-
-If it is not already there (it usually is), create the device:
-
- mknod /dev/tipar0 c 115 0
- mknod /dev/tipar1 c 115 1
- mknod /dev/tipar2 c 115 2
-
-You will have to set permissions on this device to allow you to read/write
-from it:
-
- chmod 666 /dev/tipar[0..2]
-
-Now you are ready to run a linking program such as TiLP. Be sure to configure
-it properly (RTFM).
-
-MODULE PARAMETERS:
-
- You can set these with: modprobe tipar NAME=VALUE
- There is currently no way to set these on a per-cable basis.
-
- NAME: timeout
- TYPE: integer
- DEFAULT: 15
- DESC: Timeout value in tenth of seconds. If no data is available once this
- time has expired then the driver will return with a timeout error.
-
- NAME: delay
- TYPE: integer
- DEFAULT: 10
- DESC: Inter-bit delay in micro-seconds. A lower value gives an higher data
- rate but makes transmission less reliable.
-
-These parameters can be changed at run time by any program via ioctl(2) calls
-as listed in ./include/linux/ticable.h.
-
-Rather than write 50 pages describing the ioctl() and so on, it is
-perhaps more useful you look at ticables library (dev_link.c) that demonstrates
-how to use them, and demonstrates the features of the driver. This is
-probably a lot more useful to people interested in writing applications
-that will be using this driver.
-
-QUIRKS/BUGS:
-
-None.
-
-HOW TO CONTACT US:
-
-You can email me at roms@lpg.ticalc.org. Please prefix the subject line
-with "TIPAR: " so that I am certain to notice your message.
-You can also mail JB at jb@jblache.org. He packaged these drivers for Debian.
-
-CREDITS:
-
-The code is based on tidev.c & parport.c.
-The driver has been developed independently of Texas Instruments.
The output of "cat /proc/meminfo" will have lines like:
.....
-HugePages_Total: xxx
-HugePages_Free: yyy
-HugePages_Rsvd: www
+HugePages_Total: vvv
+HugePages_Free: www
+HugePages_Rsvd: xxx
+HugePages_Surp: yyy
Hugepagesize: zzz kB
where:
HugePages_Rsvd is short for "reserved," and is the number of hugepages
for which a commitment to allocate from the pool has been made, but no
allocation has yet been made. It's vaguely analogous to overcommit.
+HugePages_Surp is short for "surplus," and is the number of hugepages in
+the pool above the value in /proc/sys/vm/nr_hugepages. The maximum
+number of surplus hugepages is controlled by
+/proc/sys/vm/nr_overcommit_hugepages.
/proc/filesystems should also show a filesystem of type "hugetlbfs" configured
in the kernel.
memory that is preset in system at this time. System administrators may want
to put this command in one of the local rc init files. This will enable the
kernel to request huge pages early in the boot process (when the possibility
-of getting physical contiguous pages is still very high).
+of getting physical contiguous pages is still very high). In either
+case, adminstrators will want to verify the number of hugepages actually
+allocated by checking the sysctl or meminfo.
+
+/proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of
+hugepages can grow, if more hugepages than /proc/sys/vm/nr_hugepages are
+requested by applications. echo'ing any non-zero value into this file
+indicates that the hugetlb subsystem is allowed to try to obtain
+hugepages from the buddy allocator, if the normal pool is exhausted. As
+these surplus hugepages go out of use, they are freed back to the buddy
+allocator.
+
+Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect
+will allow the number of surplus huge pages to exceed the overcommit
+value, as the pool hugepages (which must have been in use for a surplus
+hugepages to be allocated) will become surplus hugepages. As long as
+this condition holds, however, no more surplus huge pages will be
+allowed on the system until one of the two sysctls are increased
+sufficiently, or the surplus huge pages go out of use and are freed.
If the user applications are going to request hugepages using mmap system
call, then it is required that system administrator mount a file system of
options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For
example, size=2K has the same meaning as size=2048.
-read and write system calls are not supported on files that reside on hugetlb
-file systems.
+While read system calls are supported on files that reside on hugetlb
+file systems, write system calls are not.
Regular chown, chgrp, and chmod commands (with right permissions) could be
used to change the file attributes on hugetlbfs.
W: ftp://ftp.kernel.org/pub/linux/docs/manpages
S: Maintained
+MARVELL LIBERTAS WIRELESS DRIVER
+P: Dan Williams
+M: dcbw@redhat.com
+L: libertas-dev@lists.infradead.org
+S: Maintained
+
MARVELL MV643XX ETHERNET DRIVER
P: Dale Farnsworth
M: dale@farnsworth.org
NFS CLIENT
P: Trond Myklebust
-M: trond.myklebust@fys.uio.no
-L: linux-kernel@vger.kernel.org
+M: Trond.Myklebust@netapp.com
+L: linux-nfs@vger.kernel.org
+W: http://client.linux-nfs.org
+T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
S: Maintained
NI5010 NETWORK DRIVER
L: linux-kernel@vger.kernel.org
S: Maintained
-TI PARALLEL LINK CABLE DRIVER
-P: Romain Lievin
-M: roms@lpg.ticalc.org
-S: Maintained
-
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 24
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
CHECKFLAGS += -D__alpha__ -m64
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
-cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67
-cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6
+cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
+cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
+cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56
cpuflags-$(CONFIG_ALPHA_POLARIS) := -mcpu=pca56
cpuflags-$(CONFIG_ALPHA_SX164) := -mcpu=pca56
-cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56
-cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
-cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
+cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6
+cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67
# If GENERIC, make sure to turn off any instruction set extensions that
# the host compiler might have on by default. Given that EV4 and EV5
# have the same instruction set, prefer EV5 because an EV5 schedule is
struct el_subpacket_handler ev7_pal_subpacket_handler =
SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket);
-void
+void __init
ev7_register_error_handlers(void)
{
int i;
mb();
}
-void
+void __init
marvel_register_error_handlers(void)
{
ev7_register_error_handlers();
SUBPACKET_HANDLER_INIT(EL_CLASS__REGATTA_FAMILY,
el_process_regatta_subpacket);
-void
+void __init
titan_register_error_handlers(void)
{
size_t i;
#define __initmv __initdata
#define ALIAS_MV(x)
#else
-#define __initmv
+#define __initmv __initdata_refok
/* GCC actually has a syntax for defining aliases, but is under some
delusion that you shouldn't be able to declare it extern somewhere
extql t2, a1, t2 # U :
cmpbge zero, t1, t8 # E : is there a zero?
- andnot t2, t6, t12 # E : dest mask for a single word copy
+ andnot t2, t6, t2 # E : dest mask for a single word copy
or t8, t10, t5 # E : test for end-of-count too
- cmpbge zero, t12, t3 # E :
+ cmpbge zero, t2, t3 # E :
cmoveq a2, t5, t8 # E : Latency=2, extra map slot
nop # E : keep with cmoveq
andnot t8, t3, t8 # E : (stall)
negq t8, t6 # E : build bitmask of bytes <= zero
mskqh t1, t4, t1 # U :
- and t6, t8, t2 # E :
- subq t2, 1, t6 # E : (stall)
- or t6, t2, t8 # E : (stall)
- zapnot t12, t8, t12 # U : prepare source word; mirror changes (stall)
+ and t6, t8, t12 # E :
+ subq t12, 1, t6 # E : (stall)
+ or t6, t12, t8 # E : (stall)
+ zapnot t2, t8, t2 # U : prepare source word; mirror changes (stall)
zapnot t1, t8, t1 # U : to source validity mask
- andnot t0, t12, t0 # E : zero place for source to reside
+ andnot t0, t2, t0 # E : zero place for source to reside
or t0, t1, t0 # E : and put it there (stall both t0, t1)
stq_u t0, 0(a0) # L : (stall)
or $3, $24, $3 # clear the bits between the last
or $4, $27, $4 # written byte and the last byte in COUNT
- andnot $4, $3, $4
+ andnot $3, $4, $4
zap $1, $4, $1
stq_u $1, 0($16)
extql t2, a1, t2 # e0 :
cmpbge zero, t1, t8 # .. e1 : is there a zero?
- andnot t2, t6, t12 # e0 : dest mask for a single word copy
+ andnot t2, t6, t2 # e0 : dest mask for a single word copy
or t8, t10, t5 # .. e1 : test for end-of-count too
- cmpbge zero, t12, t3 # e0 :
+ cmpbge zero, t2, t3 # e0 :
cmoveq a2, t5, t8 # .. e1 :
andnot t8, t3, t8 # e0 :
beq t8, $u_head # .. e1 (zdb)
ldq_u t0, 0(a0) # e0 :
negq t8, t6 # .. e1 : build bitmask of bytes <= zero
mskqh t1, t4, t1 # e0 :
- and t6, t8, t2 # .. e1 :
- subq t2, 1, t6 # e0 :
- or t6, t2, t8 # e1 :
+ and t6, t8, t12 # .. e1 :
+ subq t12, 1, t6 # e0 :
+ or t6, t12, t8 # e1 :
- zapnot t12, t8, t12 # e0 : prepare source word; mirror changes
+ zapnot t2, t8, t2 # e0 : prepare source word; mirror changes
zapnot t1, t8, t1 # .. e1 : to source validity mask
- andnot t0, t12, t0 # e0 : zero place for source to reside
+ andnot t0, t2, t0 # e0 : zero place for source to reside
or t0, t1, t0 # e1 : and put it there
stq_u t0, 0(a0) # e0 :
ret (t9) # .. e1 :
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
depends on PCI && ARCH_SHARK
default y
+config PCI_HOST_ITE8152
+ bool
+ depends on PCI && MACH_ARMCORE
+ default y
+ select DMABOUNCE
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
.macro loadsp, rb
.endm
.macro writeb, ch, rb
- mcr p14, 0, \ch, c0, c1, 0
+ mcr p14, 0, \ch, c1, c0, 0
.endm
#endif
{
struct irq_desc *desc;
- printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq);
-
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
int bits_pd, bits_lp, bits_ld;
int i;
- printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq);
-
while (1) {
/* Read all */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
*/
int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
- printk(KERN_DEBUG "%s: %s %llx\n",
- __FUNCTION__, dev->dev.bus_id, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
int
pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
- printk(KERN_DEBUG "%s: %s %llx\n",
- __FUNCTION__, dev->dev.bus_id, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
static void ixp4xx_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+ unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+ unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
+ opts &= ~IXP4XX_OST_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ opts |= IXP4XX_OST_ENABLE;
+ break;
case CLOCK_EVT_MODE_UNUSED:
default:
osrt = opts = 0;
break;
- case CLOCK_EVT_MODE_RESUME:
- break;
}
*IXP4XX_OSRT1 = osrt | opts;
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
- printk(KERN_INFO "Adjusting zones for CM-x270\n");
+ pr_info("Adjusting zones for CM-x270\n");
/*
* Only adjust if > 64M on current system
{
int irq;
- printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__,
- pci_name(dev), slot, pin);
+ dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
irq = it8152_pci_map_irq(dev, slot, pin);
if (irq)
return(0);
}
-static struct pci_bus * __init
-cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
+static void cmx270_pci_preinit(void)
{
- printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n");
+ pr_info("Initializing CM-X270 PCI subsystem\n");
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
- printk(KERN_INFO "PCI Bridge found.\n");
+ pr_info("PCI Bridge found.\n");
/* set PCI I/O base at 0 */
writel(0x848, IT8152_PCI_CFG_ADDR);
/* CardBus Controller on ATXbase baseboard */
writel(0x4000, IT8152_PCI_CFG_ADDR);
if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
- printk(KERN_INFO "CardBus Bridge found.\n");
+ pr_info("CardBus Bridge found.\n");
/* Configure socket 0 */
writel(0x408C, IT8152_PCI_CFG_ADDR);
writel(0xb0000000, IT8152_PCI_CFG_DATA);
}
}
- return it8152_pci_scan_bus(nr, sys);
}
static struct hw_pci cmx270_pci __initdata = {
.map_irq = cmx270_pci_map_irq,
.nr_controllers = 1,
.setup = it8152_pci_setup,
- .scan = cmx270_pci_scan_bus,
+ .scan = it8152_pci_scan_bus,
+ .preinit = cmx270_pci_preinit,
};
static int __init cmx270_init_pci(void)
if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
return 0;
-#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP)
+#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) && \
+ defined(CONFIG_PROC_FS)
/* If we are booting a kdump kernel, the sba_iommu will
* cause devices that were not shutdown properly to MCA
* as soon as they are turned back on. Our only option for
extern unsigned long *ia32_gdt;
extern struct page *ia32_gate_page;
-struct page *
-ia32_install_shared_page (struct vm_area_struct *vma, unsigned long address, int *type)
+int
+ia32_install_shared_page (struct vm_area_struct *vma, struct vm_fault *vmf)
{
- struct page *pg = ia32_shared_page[smp_processor_id()];
- get_page(pg);
- if (type)
- *type = VM_FAULT_MINOR;
- return pg;
+ vmf->page = ia32_shared_page[smp_processor_id()];
+ get_page(vmf->page);
+ return 0;
}
-struct page *
-ia32_install_gate_page (struct vm_area_struct *vma, unsigned long address, int *type)
+int
+ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf)
{
- struct page *pg = ia32_gate_page;
- get_page(pg);
- if (type)
- *type = VM_FAULT_MINOR;
- return pg;
+ vmf->page = ia32_gate_page;
+ get_page(vmf->page);
+ return 0;
}
static struct vm_operations_struct ia32_shared_page_vm_ops = {
- .nopage = ia32_install_shared_page
+ .fault = ia32_install_shared_page
};
static struct vm_operations_struct ia32_gate_page_vm_ops = {
- .nopage = ia32_install_gate_page
+ .fault = ia32_install_gate_page
};
void
RESTORE_REG(cr.dcr, r25, r17);;
RESTORE_REG(cr.iva, r25, r17);;
RESTORE_REG(cr.pta, r25, r17);;
+ srlz.d;; // required not to violate RAW dependency
RESTORE_REG(cr.itv, r25, r17);;
RESTORE_REG(cr.pmv, r25, r17);;
RESTORE_REG(cr.cmcv, r25, r17);;
{
unsigned long flags;
int vector, cpu;
- cpumask_t domain;
+ cpumask_t domain = CPU_MASK_NONE;
vector = -ENOSPC;
{
unsigned long flags;
int irq, vector, cpu;
- cpumask_t domain;
+ cpumask_t domain = CPU_MASK_NONE;
irq = vector = -ENOSPC;
spin_lock_irqsave(&vector_lock, flags);
#include <linux/workqueue.h>
#include <linux/cpumask.h>
#include <linux/kdebug.h>
+#include <linux/cpu.h>
#include <asm/delay.h>
#include <asm/machvec.h>
PAGE_KERNEL));
}
+static void __cpuinit ia64_mca_cmc_vector_adjust(void *dummy)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (!cmc_polling_enabled)
+ ia64_mca_cmc_vector_enable(NULL);
+ local_irq_restore(flags);
+}
+
+static int __cpuinit mca_cpu_callback(struct notifier_block *nfb,
+ unsigned long action,
+ void *hcpu)
+{
+ int hotcpu = (unsigned long) hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ smp_call_function_single(hotcpu, ia64_mca_cmc_vector_adjust,
+ NULL, 1, 0);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mca_cpu_notifier __cpuinitdata = {
+ .notifier_call = mca_cpu_callback
+};
+
/*
* ia64_mca_init
*
if (!mca_init)
return 0;
+ register_hotcpu_notifier(&mca_cpu_notifier);
+
/* Setup the CMCI/P vector and handler */
init_timer(&cmc_poll_timer);
cmc_poll_timer.function = ia64_mca_cmc_poll;
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kdebug.h>
+#include <linux/utsname.h>
#include <asm/cpu.h>
#include <asm/delay.h>
print_modules();
printk("\nPid: %d, CPU %d, comm: %20s\n", task_pid_nr(current),
smp_processor_id(), current->comm);
- printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s\n",
- regs->cr_ipsr, regs->cr_ifs, ip, print_tainted());
+ printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s (%s)\n",
+ regs->cr_ipsr, regs->cr_ifs, ip, print_tainted(),
+ init_utsname()->release);
print_symbol("ip is at %s\n", ip);
printk("unat: %016lx pfs : %016lx rsc : %016lx\n",
regs->ar_unat, regs->ar_pfs, regs->ar_rsc);
ia32_drop_ia64_partial_page_list(current);
current->thread.task_size = IA32_PAGE_OFFSET;
set_fs(USER_DS);
+ memset(current->thread.tls_array, 0, sizeof(current->thread.tls_array));
}
#endif
}
err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */
err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
- if (flags & IA64_SC_FLAG_IN_SYSCALL) {
- /* Clear scratch registers if the signal interrupted a system call. */
- err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */
- err |= __put_user(0, &sc->sc_br[7]); /* b7 */
- err |= __put_user(0, &sc->sc_gr[14]); /* r14 */
- err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
- err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */
- err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */
- } else {
+ if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */
err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */
for (i = 0; i < (IA64_GRANULE_SIZE / PAGE_SIZE); i++)
SetPageUncached(&page[i]);
- flush_tlb_kernel_range(uc_addr, uc_adddr + IA64_GRANULE_SIZE);
+ flush_tlb_kernel_range(uc_addr, uc_addr + IA64_GRANULE_SIZE);
status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL);
if (status == PAL_VISIBILITY_OK_REMOTE_NEEDED) {
* IPI based ptc implementation and A-step IPI implementation.
* Rohit Seth <rohit.seth@intel.com>
* Ken Chen <kenneth.w.chen@intel.com>
+ * Christophe de Dinechin <ddd@hp.com>: Avoid ptc.e on memory allocation
*/
#include <linux/module.h>
#include <linux/init.h>
{
static DEFINE_SPINLOCK(ptcg_lock);
- if (mm != current->active_mm || !current->mm) {
- flush_tlb_all();
- return;
+ struct mm_struct *active_mm = current->active_mm;
+
+ if (mm != active_mm) {
+ /* Restore region IDs for mm */
+ if (mm && active_mm) {
+ activate_context(mm);
+ } else {
+ flush_tlb_all();
+ return;
+ }
}
/* HW requires global serialization of ptc.ga. */
} while (start < end);
}
spin_unlock(&ptcg_lock);
+
+ if (mm != active_mm) {
+ activate_context(active_mm);
+ }
}
void
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/module.h>
BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na));
if (transfer_stat & IBLS_ERROR) {
- bte_status = transfer_stat & ~IBLS_ERROR;
+ bte_status = BTE_GET_ERROR_STATUS(transfer_stat);
} else {
bte_status = BTE_SUCCESS;
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/types.h>
for (i = 0; i < BTES_PER_NODE; i++) {
bte = &err_nodepda->bte_if[i];
status = BTE_LNSTAT_LOAD(bte);
- if ((status & IBLS_ERROR) || !(status & IBLS_BUSY))
+ if (status & IBLS_ERROR) {
+ bte->bh_error = BTE_SHUB2_ERROR(status);
+ continue;
+ }
+ if (!(status & IBLS_BUSY))
continue;
mod_timer(recovery_timer, jiffies + (HZ * 5));
BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
* } else
* do desired mmr access
*
- * According to hw, we can use reads instead of writes to the above addres
+ * According to hw, we can use reads instead of writes to the above address
*
* Note this WAR can only to be used for accessing internal MMR's in the
* TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_DB1100
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_MIRAGE
select SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1100
select DMA_NONCOHERENT
select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1200
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_PB1500
select SOC_AU1500
select DMA_NONCOHERENT
select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_PB1550
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_XXS1500
/* TBD */
static struct resource pci_io_resource = {
- .start = (resource_size_t)PCI_IO_START,
- .end = (resource_size_t)PCI_IO_END,
+ .start = PCI_IO_START,
+ .end = PCI_IO_END,
.name = "PCI IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
- .start = (resource_size_t)PCI_MEM_START,
- .end = (resource_size_t)PCI_MEM_END,
+ .start = PCI_MEM_START,
+ .end = PCI_MEM_END,
.name = "PCI memory space",
.flags = IORESOURCE_MEM
};
#ifdef CONFIG_PCI
{
- u32 start, end;
+ u32 start = (u32)Au1500_PCI_MEM_START;
+ u32 end = (u32)Au1500_PCI_MEM_END;
- start = (u32)Au1500_PCI_MEM_START;
- end = (u32)Au1500_PCI_MEM_END;
- /* check for pci memory window */
- if ((phys_addr >= start) && ((phys_addr + size) < end))
+ /* Check for PCI memory window */
+ if (phys_addr >= start && (phys_addr + size - 1) <= end)
return (phys_t)
((phys_addr - start) + Au1500_PCI_MEM_START);
}
void __init plat_time_init(void)
{
+ u32 start, end;
+ int i = HZ / 10;
+
setup_pit_timer();
gt641xx_set_base_clock(GT641XX_BASE_CLOCK);
- mips_timer_state = gt641xx_timer0_state;
+ /*
+ * MIPS counter frequency is measured during a 100msec interval
+ * using GT64111 timer0.
+ */
+ while (!gt641xx_timer0_state())
+ ;
+
+ start = read_c0_count();
+
+ while (i--)
+ while (!gt641xx_timer0_state())
+ ;
+
+ end = read_c0_count();
+
+ mips_hpt_frequency = (end - start) * 10;
+ printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency);
}
unsigned long status;
/* New thread loses kernel privileges. */
- status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|KU_MASK);
+ status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
#ifdef CONFIG_64BIT
- status &= ~ST0_FR;
status |= test_thread_flag(TIF_32BIT_REGS) ? 0 : ST0_FR;
#endif
status |= KU_USER;
cd->mult = (u32) temp;
}
-void __init __weak plat_time_init(void)
-{
-}
-
/*
* This function exists in order to cause an error due to a duplicate
* definition if platform code should have its own implementation. The hook
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
+ if (cpu_has_dsp)
+ status_set |= ST0_MX;
+
change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
- if (cpu_has_dsp)
- set_c0_status(ST0_MX);
-
#ifdef CONFIG_CPU_MIPSR2
if (cpu_has_mips_r2) {
unsigned int enable = 0x0000000f;
void __init prom_free_prom_memory(void)
{
+#if 0 /* for now ... */
unsigned long addr;
int i;
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
+#endif
}
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (!dev->resource[i].start)
continue;
+ if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
+ continue;
if (dev->resource[i].flags & IORESOURCE_IO)
offset = hose->io_offset;
else if (dev->resource[i].flags & IORESOURCE_MEM)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:30 2007
+# Linux kernel version: 2.6.24-rc5
+# Thu Dec 13 22:40:57 2007
#
# CONFIG_PPC64 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:09 2007
+# Linux kernel version: 2.6.24-rc5
+# Thu Dec 13 22:39:18 2007
#
# CONFIG_PPC64 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_DISK=y
CONFIG_PS3_ROM=y
#include <asm/signal.h>
#include <asm/dcr.h>
-#ifdef CONFIG_8xx
-#include <asm/commproc.h>
-#endif
-
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(local_irq_restore);
#endif
EXPORT_SYMBOL(cacheable_memcpy);
#endif
-#ifdef CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx)
-EXPORT_SYMBOL(__res);
-#endif
-
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
else \
{ \
X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) | \
- (((X##_f1 << (sz - (N))) | X##_f0) != 0)); \
+ (((X##_f1 << (2 * _FP_W_TYPE_SIZE - (N))) | \
+ X##_f0) != 0)); \
X##_f1 = 0; \
} \
} while (0)
{
struct HvLpEvent * event;
+ restart:
/* If we have recursed, just return */
if (!spin_trylock(&hvlpevent_queue.hq_lock))
return;
if (event->xType < HvLpEvent_Type_NumTypes &&
lpEventHandler[event->xType])
lpEventHandler[event->xType](event);
- else
- printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType );
+ else {
+ u8 type = event->xType;
+
+ /*
+ * Don't printk in the spinlock as printk
+ * may require ack events form the HV to send
+ * any characters there.
+ */
+ hvlpevent_clear_valid(event);
+ spin_unlock(&hvlpevent_queue.hq_lock);
+ printk(KERN_INFO
+ "Unexpected Lp Event type=%d\n", type);
+ goto restart;
+ }
hvlpevent_clear_valid(event);
} else if (hvlpevent_queue.hq_overflow_pending)
depends on PPC_PS3
tristate "PS3 System Manager driver" if PS3_ADVANCED
select PS3_VUART
- default m
+ default y
help
Include support for the PS3 System Manager.
of space for CPM as it is larger
than on PQ2 */
-void
-cpm2_reset(void)
+void __init cpm2_reset(void)
{
#ifdef CONFIG_PPC_85xx
cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
* Based upon code written by Ross Biro, Linus Torvalds, Bob Manson,
* and David Mosberger.
*
- * Added Linux support -miguel (weird, eh?, the orignal code was meant
+ * Added Linux support -miguel (weird, eh?, the original code was meant
* to emulate SunOS).
*/
retl
nop
.size sun4v_mmustat_info, .-sun4v_mmustat_info
+
+ .globl sun4v_mmu_demap_all
+ .type sun4v_mmu_demap_all,#function
+sun4v_mmu_demap_all:
+ clr %o0
+ clr %o1
+ mov HV_MMU_ALL, %o2
+ mov HV_FAST_MMU_DEMAP_ALL, %o5
+ ta HV_FAST_TRAP
+ retl
+ nop
+ .size sun4v_mmu_demap_all, .-sun4v_mmu_demap_all
/* How the Tomatillo IRQs are routed around is pure guesswork here.
*
* All the Tomatillo devices I see in prtconf dumps seem to have only
- * a single PCI bus unit attached to it. It would seem they are seperate
+ * a single PCI bus unit attached to it. It would seem they are separate
* devices because their PortID (ie. JBUS ID) values are all different
* and thus the registers are mapped to totally different locations.
*
*/
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
- u64 pstate, ver;
+ u64 pstate, ver, busy_mask;
int nack_busy_id, is_jbus, need_more;
if (cpus_empty(mask))
"i" (ASI_INTR_W));
nack_busy_id = 0;
+ busy_mask = 0;
{
int i;
for_each_cpu_mask(i, mask) {
u64 target = (i << 14) | 0x70;
- if (!is_jbus)
+ if (is_jbus) {
+ busy_mask |= (0x1UL << (i * 2));
+ } else {
target |= (nack_busy_id << 24);
+ busy_mask |= (0x1UL <<
+ (nack_busy_id * 2));
+ }
__asm__ __volatile__(
"stxa %%g0, [%0] %1\n\t"
"membar #Sync\n\t"
/* Now, poll for completion. */
{
- u64 dispatch_stat;
+ u64 dispatch_stat, nack_mask;
long stuck;
stuck = 100000 * nack_busy_id;
+ nack_mask = busy_mask << 1;
do {
__asm__ __volatile__("ldxa [%%g0] %1, %0"
: "=r" (dispatch_stat)
: "i" (ASI_INTR_DISPATCH_STAT));
- if (dispatch_stat == 0UL) {
+ if (!(dispatch_stat & (busy_mask | nack_mask))) {
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
if (unlikely(need_more)) {
}
if (!--stuck)
break;
- } while (dispatch_stat & 0x5555555555555555UL);
+ } while (dispatch_stat & busy_mask);
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
- if ((dispatch_stat & ~(0x5555555555555555UL)) == 0) {
+ if (dispatch_stat & busy_mask) {
/* Busy bits will not clear, continue instead
* of freezing up on this cpu.
*/
}
}
-static void __init kernel_physical_mapping_init(void)
+static void __init init_kpte_bitmap(void)
{
unsigned long i;
-#ifdef CONFIG_DEBUG_PAGEALLOC
- unsigned long mem_alloced = 0UL;
-#endif
-
- read_obp_memory("reg", &pall[0], &pall_ents);
for (i = 0; i < pall_ents; i++) {
unsigned long phys_start, phys_end;
phys_end = phys_start + pall[i].reg_size;
mark_kpte_bitmap(phys_start, phys_end);
+ }
+}
+static void __init kernel_physical_mapping_init(void)
+{
#ifdef CONFIG_DEBUG_PAGEALLOC
+ unsigned long i, mem_alloced = 0UL;
+
+ for (i = 0; i < pall_ents; i++) {
+ unsigned long phys_start, phys_end;
+
+ phys_start = pall[i].phys_addr;
+ phys_end = phys_start + pall[i].reg_size;
+
mem_alloced += kernel_map_range(phys_start, phys_end,
PAGE_KERNEL);
-#endif
}
-#ifdef CONFIG_DEBUG_PAGEALLOC
printk("Allocated %ld bytes for kernel page tables.\n",
mem_alloced);
inherit_prom_mappings();
+ read_obp_memory("reg", &pall[0], &pall_ents);
+
+ init_kpte_bitmap();
+
/* Ok, we can use our TLB miss and window trap handlers safely. */
setup_tba();
"wrpr %0, %1, %%pstate"
: "=r" (pstate)
: "i" (PSTATE_IE));
- if (tlb_type == spitfire) {
+ if (tlb_type == hypervisor) {
+ sun4v_mmu_demap_all();
+ } else if (tlb_type == spitfire) {
for (i = 0; i < 64; i++) {
/* Spitfire Errata #32 workaround */
/* NOTE: Always runs on spitfire, so no
if (pkt_len > 0) {
skb_trim(skb, pkt_len);
skb->protocol = (*lp->protocol)(skb);
- netif_rx(skb);
lp->stats.rx_bytes += skb->len;
lp->stats.rx_packets++;
+ netif_rx(skb);
return pkt_len;
}
close(fds[1]);
if (pid > 0)
- CATCH_EINTR(err = waitpid(pid, NULL, 0));
+ helper_wait(pid, 0, "change_tramp");
return pid;
}
{
struct slip_pre_exec_data pe_data;
char *output;
- int status, pid, fds[2], err, output_len;
+ int pid, fds[2], err, output_len;
err = os_pipe(fds, 1, 0);
if (err < 0) {
read_output(fds[0], output, output_len);
printk("%s", output);
- CATCH_EINTR(err = waitpid(pid, &status, 0));
- if (err < 0)
- err = errno;
- else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) {
- printk(UM_KERN_ERR "'%s' didn't exit with status 0\n", argv[0]);
- err = -EINVAL;
- }
- else err = 0;
-
+ err = helper_wait(pid, 0, argv[0]);
close(fds[0]);
out_free:
static void slirp_close(int fd, void *data)
{
struct slirp_data *pri = data;
- int status,err;
+ int err;
close(fd);
close(pri->slave);
"(%d)\n", pri->pid, errno);
}
#endif
-
- CATCH_EINTR(err = waitpid(pri->pid, &status, WNOHANG));
- if (err < 0) {
- printk(UM_KERN_ERR "slirp_close: waitpid returned %d\n", errno);
- return;
- }
-
- if (err == 0) {
- printk(UM_KERN_ERR "slirp_close: process %d has not exited\n",
- pri->pid);
+ err = helper_wait(pri->pid, 1, "slirp_close");
+ if (err < 0)
return;
- }
pri->pid = -1;
}
goto out_close;
}
- pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
- NULL);
+ pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM, NULL);
if(pid < 0){
err = -errno;
printk("start_io_thread - clone failed : errno = %d\n", errno);
extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
extern int run_helper_thread(int (*proc)(void *), void *arg,
unsigned int flags, unsigned long *stack_out);
-extern int helper_wait(int pid);
+extern int helper_wait(int pid, int nohang, char *pname);
/* tls.c */
goto out_close_pipe;
err = run_helper_thread(not_aio_thread, NULL,
- CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
+ CLONE_FILES | CLONE_VM, &aio_stack);
if (err < 0)
goto out_close_pipe;
}
err = run_helper_thread(aio_thread, NULL,
- CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
+ CLONE_FILES | CLONE_VM, &aio_stack);
if (err < 0)
return err;
int control_remote, int data_me, int data_remote)
{
struct etap_pre_exec_data pe_data;
- int pid, status, err, n;
+ int pid, err, n;
char version_buf[sizeof("nnnnn\0")];
char data_fd_buf[sizeof("nnnnnn\0")];
char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")];
}
if (c != 1) {
printk(UM_KERN_ERR "etap_tramp : uml_net failed\n");
- err = -EINVAL;
- CATCH_EINTR(n = waitpid(pid, &status, 0));
- if (n < 0)
- err = -errno;
- else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 1))
- printk(UM_KERN_ERR "uml_net didn't exit with "
- "status 1\n");
+ err = helper_wait(pid, 0, "uml_net");
}
return err;
}
"errno = %d\n", errno);
return err;
}
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ helper_wait(pid, 0, "tuntap_open_tramp");
cmsg = CMSG_FIRSTHDR(&msg);
if (cmsg == NULL) {
data.fd = fds[1];
data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
kmalloc(PATH_MAX, UM_GFP_KERNEL);
- pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data);
+ pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
if (pid < 0) {
ret = -errno;
printk("run_helper : clone failed, errno = %d\n", errno);
ret = n;
kill(pid, SIGKILL);
}
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WCLONE));
}
out_free2:
return -ENOMEM;
sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *);
- pid = clone(proc, (void *) sp, flags | SIGCHLD, arg);
+ pid = clone(proc, (void *) sp, flags, arg);
if (pid < 0) {
err = -errno;
printk("run_helper_thread : clone failed, errno = %d\n",
return err;
}
if (stack_out == NULL) {
- CATCH_EINTR(pid = waitpid(pid, &status, 0));
+ CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE));
if (pid < 0) {
err = -errno;
printk("run_helper_thread - wait failed, errno = %d\n",
return pid;
}
-int helper_wait(int pid)
+int helper_wait(int pid, int nohang, char *pname)
{
- int ret;
+ int ret, status;
+ int wflags = __WCLONE;
- CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG));
+ if (nohang)
+ wflags |= WNOHANG;
+
+ if (!pname)
+ pname = "helper_wait";
+
+ CATCH_EINTR(ret = waitpid(pid, &status, wflags));
if (ret < 0) {
- ret = -errno;
- printk("helper_wait : waitpid failed, errno = %d\n", errno);
- }
- return ret;
+ printk(UM_KERN_ERR "%s : waitpid process %d failed, "
+ "errno = %d\n", pname, pid, errno);
+ return -errno;
+ } else if (nohang && ret == 0) {
+ printk(UM_KERN_ERR "%s : process %d has not exited\n",
+ pname, pid);
+ return -ECHILD;
+ } else if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
+ printk(UM_KERN_ERR "%s : process %d didn't exit with "
+ "status 0\n", pname, pid);
+ return -ECHILD;
+ } else
+ return 0;
}
{
kill(pid, SIGKILL);
if (reap_child)
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
/* This is here uniquely to have access to the userspace errno, i.e. the one
ptrace(PTRACE_KILL, pid);
ptrace(PTRACE_CONT, pid);
if (reap_child)
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
/* Don't use the glibc version, which caches the result in TLS. It misses some
int n, status, err;
while (1) {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if ((n < 0) || !WIFSTOPPED(status))
goto bad_wait;
panic("handle_trap - continuing to end of syscall "
"failed, errno = %d\n", errno);
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if ((err < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGTRAP + 0x80)) {
err = ptrace_dump_regs(pid);
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
- flags = CLONE_FILES | SIGCHLD;
+ flags = CLONE_FILES;
if (proc_mm)
flags |= CLONE_VM;
+ else
+ flags |= SIGCHLD;
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if (pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
do {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if (n < 0)
panic("start_userspace : wait failed, errno = %d",
errno);
"pid=%d, ptrace operation = %d, errno = %d\n",
pid, op, errno);
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if (err < 0)
panic("userspace - waitpid failed, errno = %d\n",
errno);
* nothing reasonable to do if that fails.
*/
- while ((pid = waitpid(-1, NULL, WNOHANG)) > 0)
+ while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0)
os_kill_ptraced_process(pid, 0);
abort();
/**
* setup_local_APIC - setup the local APIC
*/
-void __devinit setup_local_APIC(void)
+void __cpuinit setup_local_APIC(void)
{
unsigned long oldvalue, value, maxlvt, integrated;
int i, j;
{ 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */
{ 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3f, LVL_2, 256 }, /* 2-way set assoc, 64 byte line size */
{ 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
{ 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
{ 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
static int __init timer_irq_works(void)
{
unsigned long t1 = jiffies;
+ unsigned long flags;
if (no_timer_check)
return 1;
+ local_save_flags(flags);
local_irq_enable();
/* Let ten ticks pass... */
mdelay((10 * 1000) / HZ);
+ local_irq_restore(flags);
/*
* Expect a few ticks at least, to be sure some possible
int apic1, pin1, apic2, pin2;
int vector;
unsigned int ver;
+ unsigned long flags;
+
+ local_irq_save(flags);
ver = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(ver);
}
if (disable_timer_pin_1 > 0)
clear_IO_APIC_pin(0, pin1);
- return;
+ goto out;
}
clear_IO_APIC_pin(apic1, pin1);
printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
}
- return;
+ goto out;
}
/*
* Cleanup, just in case ...
if (timer_irq_works()) {
printk(" works.\n");
- return;
+ goto out;
}
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
printk(" failed.\n");
if (timer_irq_works()) {
printk(" works.\n");
- return;
+ goto out;
}
printk(" failed :(.\n");
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
"report. Then try booting with the 'noapic' option");
+out:
+ local_irq_restore(flags);
}
/*
static int __init timer_irq_works(void)
{
unsigned long t1 = jiffies;
+ unsigned long flags;
+ local_save_flags(flags);
local_irq_enable();
/* Let ten ticks pass... */
mdelay((10 * 1000) / HZ);
+ local_irq_restore(flags);
/*
* Expect a few ticks at least, to be sure some possible
{
struct irq_cfg *cfg = irq_cfg + 0;
int apic1, pin1, apic2, pin2;
+ unsigned long flags;
+
+ local_irq_save(flags);
/*
* get/set the timer IRQ vector:
}
if (disable_timer_pin_1 > 0)
clear_IO_APIC_pin(0, pin1);
- return;
+ goto out;
}
clear_IO_APIC_pin(apic1, pin1);
apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
}
- return;
+ goto out;
}
/*
* Cleanup, just in case ...
if (timer_irq_works()) {
apic_printk(APIC_VERBOSE," works.\n");
- return;
+ goto out;
}
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
apic_printk(APIC_VERBOSE," failed.\n");
if (timer_irq_works()) {
apic_printk(APIC_VERBOSE," works.\n");
- return;
+ goto out;
}
apic_printk(APIC_VERBOSE," failed :(.\n");
panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+out:
+ local_irq_restore(flags);
}
static int __init notimercheck(char *s)
if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
if (®s->esp != kcb->jprobe_saved_esp) {
- struct pt_regs *saved_regs =
- container_of(kcb->jprobe_saved_esp,
- struct pt_regs, esp);
+ struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
printk("current esp %p does not match saved esp %p\n",
®s->esp, kcb->jprobe_saved_esp);
printk("Saved registers for jprobe %p\n", jp);
struct pt_regs *regs, struct kprobe_ctlblk *kcb)
{
unsigned long *tos = (unsigned long *)regs->rsp;
- unsigned long next_rip = 0;
unsigned long copy_rip = (unsigned long)p->ainsn.insn;
unsigned long orig_rip = (unsigned long)p->addr;
kprobe_opcode_t *insn = p->ainsn.insn;
if (*insn >= 0x40 && *insn <= 0x4f)
insn++;
+ regs->eflags &= ~TF_MASK;
switch (*insn) {
- case 0x9c: /* pushfl */
+ case 0x9c: /* pushfl */
*tos &= ~(TF_MASK | IF_MASK);
*tos |= kcb->kprobe_old_rflags;
break;
- case 0xc3: /* ret/lret */
- case 0xcb:
- case 0xc2:
+ case 0xc2: /* iret/ret/lret */
+ case 0xc3:
case 0xca:
- regs->eflags &= ~TF_MASK;
- /* rip is already adjusted, no more changes required*/
- return;
- case 0xe8: /* call relative - Fix return addr */
+ case 0xcb:
+ case 0xcf:
+ case 0xea: /* jmp absolute -- ip is correct */
+ /* ip is already adjusted, no more changes required */
+ goto no_change;
+ case 0xe8: /* call relative - Fix return addr */
*tos = orig_rip + (*tos - copy_rip);
break;
case 0xff:
if ((insn[1] & 0x30) == 0x10) {
/* call absolute, indirect */
- /* Fix return addr; rip is correct. */
- next_rip = regs->rip;
+ /* Fix return addr; ip is correct. */
*tos = orig_rip + (*tos - copy_rip);
+ goto no_change;
} else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */
((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */
- /* rip is correct. */
- next_rip = regs->rip;
+ /* ip is correct. */
+ goto no_change;
}
- break;
- case 0xea: /* jmp absolute -- rip is correct */
- next_rip = regs->rip;
- break;
default:
break;
}
- regs->eflags &= ~TF_MASK;
- if (next_rip) {
- regs->rip = next_rip;
- } else {
- regs->rip = orig_rip + (regs->rip - copy_rip);
- }
+ regs->rip = orig_rip + (regs->rip - copy_rip);
+no_change:
+
+ return;
}
int __kprobes post_kprobe_handler(struct pt_regs *regs)
struct jprobe *jp = container_of(p, struct jprobe, kp);
if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
- if ((long *)regs->rsp != kcb->jprobe_saved_rsp) {
- struct pt_regs *saved_regs =
- container_of(kcb->jprobe_saved_rsp,
- struct pt_regs, rsp);
+ if ((unsigned long *)regs->rsp != kcb->jprobe_saved_rsp) {
+ struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
printk("current rsp %p does not match saved rsp %p\n",
(long *)regs->rsp, kcb->jprobe_saved_rsp);
printk("Saved registers for jprobe %p\n", jp);
mwait_idle_with_hints(0, 0);
}
-void __devinit select_idle_routine(const struct cpuinfo_x86 *c)
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_MWAIT)) {
printk("monitor/mwait feature present.\n");
address, and must not be in the .bss segment! */
unsigned long init_pg_tables_end __initdata = ~0UL;
-int disable_pse __devinitdata = 0;
+int disable_pse __cpuinitdata = 0;
/*
* Machine setup..
#include <asm/mtrr.h>
/* Set if we find a B stepping CPU */
-static int __devinitdata smp_b_stepping;
+static int __cpuinitdata smp_b_stepping;
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
}
#ifdef CONFIG_HOTPLUG_CPU
-static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS];
-static inline struct task_struct * alloc_idle_task(int cpu)
+static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
+static inline struct task_struct * __cpuinit alloc_idle_task(int cpu)
{
struct task_struct *idle;
struct cpuinfo_x86 *c = &cpu_data(id);
*c = boot_cpu_data;
- c->cpu_index = id;
identify_cpu(c);
+ c->cpu_index = id;
print_cpu_info(c);
}
return 0;
}
-static int res_kernel_text_pud_init(pud_t *pud, unsigned long start)
-{
- pmd_t *pmd;
- unsigned long paddr;
-
- pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
- if (!pmd)
- return -ENOMEM;
- set_pud(pud + pud_index(start), __pud(__pa(pmd) | _KERNPG_TABLE));
- for (paddr = 0; paddr < KERNEL_TEXT_SIZE; pmd++, paddr += PMD_SIZE) {
- unsigned long pe;
-
- pe = __PAGE_KERNEL_LARGE_EXEC | _PAGE_GLOBAL | paddr;
- pe &= __supported_pte_mask;
- set_pmd(pmd, __pmd(pe));
- }
-
- return 0;
-}
-
static int set_up_temporary_mappings(void)
{
unsigned long start, end, next;
- pud_t *pud;
int error;
temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
if (!temp_level4_pgt)
return -ENOMEM;
+ /* It is safe to reuse the original kernel mapping */
+ set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+ init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+
/* Set up the direct mapping from scratch */
start = (unsigned long)pfn_to_kaddr(0);
end = (unsigned long)pfn_to_kaddr(end_pfn);
for (; start < end; start = next) {
- pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+ pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
if (!pud)
return -ENOMEM;
next = start + PGDIR_SIZE;
set_pgd(temp_level4_pgt + pgd_index(start),
mk_kernel_pgd(__pa(pud)));
}
-
- /* Set up the kernel text mapping from scratch */
- pud = (pud_t *)get_safe_page(GFP_ATOMIC);
- if (!pud)
- return -ENOMEM;
- error = res_kernel_text_pud_init(pud, __START_KERNEL_map);
- if (!error)
- set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
- __pgd(__pa(pud) | _PAGE_TABLE));
-
- return error;
+ return 0;
}
int swsusp_arch_resume(void)
if (die.lock_owner != raw_smp_processor_id()) {
console_verbose();
+ raw_local_irq_save(flags);
__raw_spin_lock(&die.lock);
- raw_local_save_flags(flags);
die.lock_owner = smp_processor_id();
die.lock_owner_depth = 0;
bust_spinlocks(1);
- }
- else
- raw_local_save_flags(flags);
+ } else
+ raw_local_irq_save(flags);
if (++die.lock_owner_depth < 3) {
unsigned long esp;
/**
* @file op_model_athlon.h
- * athlon / K7 model-specific MSR operations
+ * athlon / K7 / K8 / Family 10h model-specific MSR operations
*
* @remark Copyright 2002 OProfile authors
* @remark Read the file COPYING
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
continue;
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(high);
CTRL_WRITE(low, high, msrs, i);
}
CTR_WRITE(counter_config[i].count, msrs, i);
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
CTRL_SET_USR(low, counter_config[i].user);
CTRL_SET_KERN(low, counter_config[i].kernel);
CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+ CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+ CTRL_SET_HOST_ONLY(high, 0);
+ CTRL_SET_GUEST_ONLY(high, 0);
+
CTRL_WRITE(low, high, msrs, i);
} else {
reset_value[i] = 0;
if (pkt_len > 0) {
skb_trim(skb, pkt_len);
skb->protocol = lp->tp.protocol(skb);
- // netif_rx(skb);
- netif_rx_ni(skb);
lp->stats.rx_bytes += skb->len;
lp->stats.rx_packets++;
+ // netif_rx(skb);
+ netif_rx_ni(skb);
return pkt_len;
}
kfree_skb(skb);
}
/*
- * as_fifo_expired returns 0 if there are no expired reads on the fifo,
+ * as_fifo_expired returns 0 if there are no expired requests on the fifo,
* 1 otherwise. It is ratelimited so that we only perform the check once per
* `fifo_expire' interval. Otherwise a large number of expired requests
* would create a hopeless seekstorm.
ad->batch_data_dir = REQ_ASYNC;
ad->current_write_count = ad->write_batch_count;
ad->write_batch_idled = 0;
- rq = ad->next_rq[ad->batch_data_dir];
+ rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
+ ad->last_check_fifo[REQ_ASYNC] = jiffies;
goto dispatch_request;
}
as_add_rq_rb(ad, rq);
/*
- * set expire time (only used for reads) and add to fifo list
+ * set expire time and add to fifo list
*/
rq_set_fifo_time(rq, jiffies + ad->fifo_expire[data_dir]);
list_add_tail(&rq->queuelist, &ad->fifo_list[data_dir]);
static int __init as_init(void)
{
- return elv_register(&iosched_as);
+ elv_register(&iosched_as);
+
+ return 0;
}
static void __exit as_exit(void)
static int __init cfq_init(void)
{
- int ret;
-
/*
* could be 0 on HZ < 1000 setups
*/
if (cfq_slab_setup())
return -ENOMEM;
- ret = elv_register(&iosched_cfq);
- if (ret)
- cfq_slab_kill();
+ elv_register(&iosched_cfq);
- return ret;
+ return 0;
}
static void __exit cfq_exit(void)
static int __init deadline_init(void)
{
- return elv_register(&iosched_deadline);
+ elv_register(&iosched_deadline);
+
+ return 0;
}
static void __exit deadline_exit(void)
__elv_unregister_queue(q->elevator);
}
-int elv_register(struct elevator_type *e)
+void elv_register(struct elevator_type *e)
{
char *def = "";
def = " (default)";
printk(KERN_INFO "io scheduler %s registered%s\n", e->elevator_name, def);
- return 0;
}
EXPORT_SYMBOL_GPL(elv_register);
static int __init noop_init(void)
{
- return elv_register(&elevator_noop);
+ elv_register(&elevator_noop);
+
+ return 0;
}
static void __exit noop_exit(void)
rq->cmd_len = hdr->cmd_len;
rq->cmd_type = REQ_TYPE_BLOCK_PC;
- rq->timeout = (hdr->timeout * HZ) / 1000;
+ rq->timeout = msecs_to_jiffies(hdr->timeout);
if (!rq->timeout)
rq->timeout = q->sg_timeout;
if (!rq->timeout)
*/
blk_execute_rq(q, bd_disk, rq, 0);
- hdr->duration = ((jiffies - start_time) * 1000) / HZ;
+ hdr->duration = jiffies_to_msecs(jiffies - start_time);
return blk_complete_sghdr_rq(rq, hdr, bio);
out:
return POWER_SUPPLY_TECHNOLOGY_NiMH;
if (!strcasecmp("LION", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LION;
- if (!strcasecmp("LI-ION", battery->type))
+ if (!strncasecmp("LI-ION", battery->type, 6))
return POWER_SUPPLY_TECHNOLOGY_LION;
if (!strcasecmp("LiP", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LIPO;
static nodemask_t nodes_found_map = NODE_MASK_NONE;
/* maps to convert between proximity domain and logical node ID */
-static int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS]
+static int pxm_to_node_map[MAX_PXM_DOMAINS]
= { [0 ... MAX_PXM_DOMAINS - 1] = NID_INVAL };
-static int __cpuinitdata node_to_pxm_map[MAX_NUMNODES]
+static int node_to_pxm_map[MAX_NUMNODES]
= { [0 ... MAX_NUMNODES - 1] = PXM_INVAL };
int pxm_to_node(int pxm)
acpi_get_data(device->handle, acpi_pci_data_handler,
(void **)&data);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to get data from device %s",
- acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
#define ACPI_BATTERY_DIR_NAME "BAT%i"
#define ACPI_AC_DIR_NAME "AC0"
-enum acpi_sbs_device_addr {
- ACPI_SBS_CHARGER = 0x9,
- ACPI_SBS_MANAGER = 0xa,
- ACPI_SBS_BATTERY = 0xb,
-};
-
#define ACPI_SBS_NOTIFY_STATUS 0x80
#define ACPI_SBS_NOTIFY_INFO 0x81
static inline char *acpi_battery_units(struct acpi_battery *battery)
{
- return acpi_battery_mode(battery) ? " mWh" : " mAh";
+ return acpi_battery_mode(battery) ? " mW" : " mA";
}
if (!battery->present)
goto end;
- seq_printf(seq, "design capacity: %i%s\n",
+ seq_printf(seq, "design capacity: %i%sh\n",
battery->design_capacity * acpi_battery_scale(battery),
acpi_battery_units(battery));
- seq_printf(seq, "last full capacity: %i%s\n",
+ seq_printf(seq, "last full capacity: %i%sh\n",
battery->full_charge_capacity * acpi_battery_scale(battery),
acpi_battery_units(battery));
seq_printf(seq, "battery technology: rechargeable\n");
{
struct acpi_battery *battery = seq->private;
struct acpi_sbs *sbs = battery->sbs;
- int result = 0;
+ int rate;
mutex_lock(&sbs->lock);
seq_printf(seq, "present: %s\n",
seq_printf(seq, "charging state: %s\n",
(battery->current_now < 0) ? "discharging" :
((battery->current_now > 0) ? "charging" : "charged"));
- seq_printf(seq, "present rate: %d mA\n",
- abs(battery->current_now) * acpi_battery_ipscale(battery));
- seq_printf(seq, "remaining capacity: %i%s\n",
+ rate = abs(battery->current_now) * acpi_battery_ipscale(battery);
+ rate *= (acpi_battery_mode(battery))?(battery->voltage_now *
+ acpi_battery_vscale(battery)/1000):1;
+ seq_printf(seq, "present rate: %d%s\n", rate,
+ acpi_battery_units(battery));
+ seq_printf(seq, "remaining capacity: %i%sh\n",
battery->capacity_now * acpi_battery_scale(battery),
acpi_battery_units(battery));
seq_printf(seq, "present voltage: %i mV\n",
end:
mutex_unlock(&sbs->lock);
- return result;
+ return 0;
}
static int acpi_battery_state_open_fs(struct inode *inode, struct file *file)
acpi_battery_get_alarm(battery);
seq_printf(seq, "alarm: ");
if (battery->alarm_capacity)
- seq_printf(seq, "%i%s\n",
+ seq_printf(seq, "%i%sh\n",
battery->alarm_capacity *
acpi_battery_scale(battery),
acpi_battery_units(battery));
EXPORT_SYMBOL_GPL(acpi_smbus_unregister_callback);
-static void acpi_smbus_callback(void *context)
+static inline void acpi_smbus_callback(void *context)
{
struct acpi_smb_hc *hc = context;
-
if (hc->callback)
hc->callback(hc->context);
}
{
struct acpi_smb_hc *hc = context;
union acpi_smb_status status;
+ u8 address;
if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw))
return 0;
/* Check if it is only a completion notify */
if (!status.fields.alarm)
return 0;
mutex_lock(&hc->lock);
+ smb_hc_read(hc, ACPI_SMB_ALARM_ADDRESS, &address);
+ status.fields.alarm = 0;
smb_hc_write(hc, ACPI_SMB_STATUS, status.raw);
- if (hc->callback)
- acpi_os_execute(OSL_GPE_HANDLER, acpi_smbus_callback, hc);
+ /* We are only interested in events coming from known devices */
+ switch (address >> 1) {
+ case ACPI_SBS_CHARGER:
+ case ACPI_SBS_MANAGER:
+ case ACPI_SBS_BATTERY:
+ acpi_os_execute(OSL_GPE_HANDLER,
+ acpi_smbus_callback, hc);
+ default:;
+ }
mutex_unlock(&hc->lock);
return 0;
}
static const u8 SMBUS_PEC = 0x80;
+enum acpi_sbs_device_addr {
+ ACPI_SBS_CHARGER = 0x9,
+ ACPI_SBS_MANAGER = 0xa,
+ ACPI_SBS_BATTERY = 0xb,
+};
+
typedef void (*smbus_alarm_callback)(void *context);
extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
struct acpi_video_device_brightness *br = NULL;
- memset(&device->cap, 0, 4);
+ memset(&device->cap, 0, sizeof(device->cap));
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) {
device->cap._ADR = 1;
{
acpi_handle h_dummy1;
- memset(&video->cap, 0, 4);
+ memset(&video->cap, 0, sizeof(video->cap));
if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) {
video->cap._DOS = 1;
}
* Copyright (C) 2006 Randy Dunlap
*/
+#include <linux/module.h>
#include <linux/ata.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <acpi/acmacros.h>
#include <acpi/actypes.h>
+enum {
+ ATA_ACPI_FILTER_SETXFER = 1 << 0,
+ ATA_ACPI_FILTER_LOCK = 1 << 1,
+
+ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
+ ATA_ACPI_FILTER_LOCK,
+};
+
+static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
return (dev->bus == &pci_bus_type);
}
+static void ata_acpi_clear_gtf(struct ata_device *dev)
+{
+ kfree(dev->gtf_cache);
+ dev->gtf_cache = NULL;
+}
+
/**
* ata_acpi_associate_sata_port - associate SATA port with ACPI objects
* @ap: target SATA port
dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
}
+
+ if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
+ ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
}
/**
+ * ata_acpi_dissociate - dissociate ATA host from ACPI objects
+ * @host: target ATA host
+ *
+ * This function is called during driver detach after the whole host
+ * is shut down.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_acpi_dissociate(struct ata_host *host)
+{
+ int i;
+
+ /* Restore initial _GTM values so that driver which attaches
+ * afterward can use them too.
+ */
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
+
+ if (ap->acpi_handle && gtm)
+ ata_acpi_stm(ap, gtm);
+ }
+}
+
+/**
* ata_acpi_gtm - execute _GTM
* @ap: target ATA port
* @gtm: out parameter for _GTM result
* RETURNS:
* 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
*/
-int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
+int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
{
struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
union acpi_object *out_obj;
* RETURNS:
* 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
*/
-int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
+int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
{
acpi_status status;
+ struct ata_acpi_gtm stm_buf = *stm;
struct acpi_object_list input;
union acpi_object in_params[3];
in_params[0].type = ACPI_TYPE_BUFFER;
in_params[0].buffer.length = sizeof(struct ata_acpi_gtm);
- in_params[0].buffer.pointer = (u8 *)stm;
+ in_params[0].buffer.pointer = (u8 *)&stm_buf;
/* Buffers for id may need byteswapping ? */
in_params[1].type = ACPI_TYPE_BUFFER;
in_params[1].buffer.length = 512;
* ata_dev_get_GTF - get the drive bootup default taskfile settings
* @dev: target ATA device
* @gtf: output parameter for buffer containing _GTF taskfile arrays
- * @ptr_to_free: pointer which should be freed
*
* This applies to both PATA and SATA drives.
*
* EH context.
*
* RETURNS:
- * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
- * contain valid data.
+ * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL
+ * if _GTF is invalid.
*/
-static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
- void **ptr_to_free)
+static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
{
struct ata_port *ap = dev->link->ap;
acpi_status status;
union acpi_object *out_obj;
int rc = 0;
+ /* if _GTF is cached, use the cached value */
+ if (dev->gtf_cache) {
+ out_obj = dev->gtf_cache;
+ goto done;
+ }
+
/* set up output buffer */
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
/* _GTF has no input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+ out_obj = dev->gtf_cache = output.pointer;
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ata_dev_printk(dev, KERN_WARNING,
"_GTF evaluation failed (AE 0x%x)\n",
status);
+ rc = -EINVAL;
}
goto out_free;
}
__FUNCTION__,
(unsigned long long)output.length,
output.pointer);
+ rc = -EINVAL;
goto out_free;
}
- out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
ata_dev_printk(dev, KERN_WARNING,
"_GTF unexpected object type 0x%x\n",
out_obj->type);
+ rc = -EINVAL;
goto out_free;
}
ata_dev_printk(dev, KERN_WARNING,
"unexpected _GTF length (%d)\n",
out_obj->buffer.length);
+ rc = -EINVAL;
goto out_free;
}
- *ptr_to_free = out_obj;
- *gtf = (void *)out_obj->buffer.pointer;
+ done:
rc = out_obj->buffer.length / REGS_PER_GTF;
-
- if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
- "gtf=%p, gtf_count=%d, ptr_to_free=%p\n",
- __FUNCTION__, *gtf, rc, *ptr_to_free);
+ if (gtf) {
+ *gtf = (void *)out_obj->buffer.pointer;
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG,
+ "%s: returning gtf=%p, gtf_count=%d\n",
+ __FUNCTION__, *gtf, rc);
+ }
return rc;
out_free:
- kfree(output.pointer);
+ ata_acpi_clear_gtf(dev);
return rc;
}
int ata_acpi_cbl_80wire(struct ata_port *ap)
{
- struct ata_acpi_gtm gtm;
+ const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
int valid = 0;
- /* No _GTM data, no information */
- if (ata_acpi_gtm(ap, >m) < 0)
+ if (!gtm)
return 0;
/* Split timing, DMA enabled */
- if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55)
+ if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
valid |= 1;
- if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55)
+ if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
valid |= 2;
/* Shared timing, DMA enabled */
- if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55)
+ if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
valid |= 1;
- if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55)
+ if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
valid |= 2;
/* Drive check */
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+static void ata_acpi_gtf_to_tf(struct ata_device *dev,
+ const struct ata_acpi_gtf *gtf,
+ struct ata_taskfile *tf)
+{
+ ata_tf_init(dev, tf);
+
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->feature = gtf->tf[0]; /* 0x1f1 */
+ tf->nsect = gtf->tf[1]; /* 0x1f2 */
+ tf->lbal = gtf->tf[2]; /* 0x1f3 */
+ tf->lbam = gtf->tf[3]; /* 0x1f4 */
+ tf->lbah = gtf->tf[4]; /* 0x1f5 */
+ tf->device = gtf->tf[5]; /* 0x1f6 */
+ tf->command = gtf->tf[6]; /* 0x1f7 */
+}
+
+static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+ const struct ata_taskfile *ptf)
+{
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+ /* libata doesn't use ACPI to configure transfer mode.
+ * It will only confuse device configuration. Skip.
+ */
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_XFER)
+ return 1;
+ }
+
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+ /* BIOS writers, sorry but we don't wanna lock
+ * features unless the user explicitly said so.
+ */
+
+ /* DEVICE CONFIGURATION FREEZE LOCK */
+ if (tf->command == ATA_CMD_CONF_OVERLAY &&
+ tf->feature == ATA_DCO_FREEZE_LOCK)
+ return 1;
+
+ /* SECURITY FREEZE LOCK */
+ if (tf->command == ATA_CMD_SEC_FREEZE_LOCK)
+ return 1;
+
+ /* SET MAX LOCK and SET MAX FREEZE LOCK */
+ if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) &&
+ tf->command == ATA_CMD_SET_MAX &&
+ (tf->feature == ATA_SET_MAX_LOCK ||
+ tf->feature == ATA_SET_MAX_FREEZE_LOCK))
+ return 1;
+ }
+
+ return 0;
+}
+
/**
- * taskfile_load_raw - send taskfile registers to host controller
+ * ata_acpi_run_tf - send taskfile registers to host controller
* @dev: target ATA device
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
*
* EH context.
*
* RETURNS:
- * 0 on success, -errno on failure.
+ * 1 if command is executed successfully. 0 if ignored, rejected or
+ * filtered out, -errno on other errors.
*/
-static int taskfile_load_raw(struct ata_device *dev,
- const struct ata_acpi_gtf *gtf)
+static int ata_acpi_run_tf(struct ata_device *dev,
+ const struct ata_acpi_gtf *gtf,
+ const struct ata_acpi_gtf *prev_gtf)
{
- struct ata_port *ap = dev->link->ap;
- struct ata_taskfile tf, rtf;
+ struct ata_taskfile *pptf = NULL;
+ struct ata_taskfile tf, ptf, rtf;
unsigned int err_mask;
+ const char *level;
+ char msg[60];
+ int rc;
if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
&& (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
&& (gtf->tf[6] == 0))
return 0;
- ata_tf_init(dev, &tf);
+ ata_acpi_gtf_to_tf(dev, gtf, &tf);
+ if (prev_gtf) {
+ ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf);
+ pptf = &ptf;
+ }
- /* convert gtf to tf */
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
- tf.protocol = ATA_PROT_NODATA;
- tf.feature = gtf->tf[0]; /* 0x1f1 */
- tf.nsect = gtf->tf[1]; /* 0x1f2 */
- tf.lbal = gtf->tf[2]; /* 0x1f3 */
- tf.lbam = gtf->tf[3]; /* 0x1f4 */
- tf.lbah = gtf->tf[4]; /* 0x1f5 */
- tf.device = gtf->tf[5]; /* 0x1f6 */
- tf.command = gtf->tf[6]; /* 0x1f7 */
+ if (!ata_acpi_filter_tf(&tf, pptf)) {
+ rtf = tf;
+ err_mask = ata_exec_internal(dev, &rtf, NULL,
+ DMA_NONE, NULL, 0, 0);
- if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd "
- "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n",
- tf.command, tf.feature, tf.nsect,
- tf.lbal, tf.lbam, tf.lbah, tf.device);
-
- rtf = tf;
- err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR,
- "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
- "(Emask=0x%x Stat=0x%02x Err=0x%02x)\n",
- tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam,
- tf.lbah, tf.device, err_mask, rtf.command, rtf.feature);
- return -EIO;
+ switch (err_mask) {
+ case 0:
+ level = KERN_DEBUG;
+ snprintf(msg, sizeof(msg), "succeeded");
+ rc = 1;
+ break;
+
+ case AC_ERR_DEV:
+ level = KERN_INFO;
+ snprintf(msg, sizeof(msg),
+ "rejected by device (Stat=0x%02x Err=0x%02x)",
+ rtf.command, rtf.feature);
+ rc = 0;
+ break;
+
+ default:
+ level = KERN_ERR;
+ snprintf(msg, sizeof(msg),
+ "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
+ err_mask, rtf.command, rtf.feature);
+ rc = -EIO;
+ break;
+ }
+ } else {
+ level = KERN_INFO;
+ snprintf(msg, sizeof(msg), "filtered out");
+ rc = 0;
}
- return 0;
+ ata_dev_printk(dev, level,
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+ tf.command, tf.feature, tf.nsect, tf.lbal,
+ tf.lbam, tf.lbah, tf.device, msg);
+
+ return rc;
}
/**
* ata_acpi_exec_tfs - get then write drive taskfile settings
* @dev: target ATA device
+ * @nr_executed: out paramter for the number of executed commands
*
* Evaluate _GTF and excute returned taskfiles.
*
* EH context.
*
* RETURNS:
- * Number of executed taskfiles on success, 0 if _GTF doesn't exist or
- * doesn't contain valid data. -errno on other errors.
+ * Number of executed taskfiles on success, 0 if _GTF doesn't exist.
+ * -errno on other errors.
*/
-static int ata_acpi_exec_tfs(struct ata_device *dev)
+static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
{
- struct ata_acpi_gtf *gtf = NULL;
- void *ptr_to_free = NULL;
+ struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL;
int gtf_count, i, rc;
/* get taskfiles */
- gtf_count = ata_dev_get_GTF(dev, >f, &ptr_to_free);
+ rc = ata_dev_get_GTF(dev, >f);
+ if (rc < 0)
+ return rc;
+ gtf_count = rc;
/* execute them */
- for (i = 0, rc = 0; i < gtf_count; i++) {
- int tmp;
-
- /* ACPI errors are eventually ignored. Run till the
- * end even after errors.
- */
- tmp = taskfile_load_raw(dev, gtf++);
- if (!rc)
- rc = tmp;
+ for (i = 0; i < gtf_count; i++, gtf++) {
+ rc = ata_acpi_run_tf(dev, gtf, pgtf);
+ if (rc < 0)
+ break;
+ if (rc) {
+ (*nr_executed)++;
+ pgtf = gtf;
+ }
}
- kfree(ptr_to_free);
+ ata_acpi_clear_gtf(dev);
- if (rc == 0)
- return gtf_count;
- return rc;
+ if (rc < 0)
+ return rc;
+ return 0;
}
/**
*/
int ata_acpi_on_suspend(struct ata_port *ap)
{
- unsigned long flags;
- int rc;
-
- /* proceed iff per-port acpi_handle is valid */
- if (!ap->acpi_handle)
- return 0;
- BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
-
- /* store timing parameters */
- rc = ata_acpi_gtm(ap, &ap->acpi_gtm);
-
- spin_lock_irqsave(ap->lock, flags);
- if (rc == 0)
- ap->pflags |= ATA_PFLAG_GTM_VALID;
- else
- ap->pflags &= ~ATA_PFLAG_GTM_VALID;
- spin_unlock_irqrestore(ap->lock, flags);
-
- if (rc == -ENOENT)
- rc = 0;
- return rc;
+ /* nada */
+ return 0;
}
/**
*/
void ata_acpi_on_resume(struct ata_port *ap)
{
+ const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
struct ata_device *dev;
- if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) {
- BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
+ if (ap->acpi_handle && gtm) {
+ /* _GTM valid */
/* restore timing parameters */
- ata_acpi_stm(ap, &ap->acpi_gtm);
- }
+ ata_acpi_stm(ap, gtm);
- /* schedule _GTF */
- ata_link_for_each_dev(dev, &ap->link)
- dev->flags |= ATA_DFLAG_ACPI_PENDING;
+ /* _GTF should immediately follow _STM so that it can
+ * use values set by _STM. Cache _GTF result and
+ * schedule _GTF.
+ */
+ ata_link_for_each_dev(dev, &ap->link) {
+ ata_acpi_clear_gtf(dev);
+ if (ata_dev_get_GTF(dev, NULL) >= 0)
+ dev->flags |= ATA_DFLAG_ACPI_PENDING;
+ }
+ } else {
+ /* SATA _GTF needs to be evaulated after _SDD and
+ * there's no reason to evaluate IDE _GTF early
+ * without _STM. Clear cache and schedule _GTF.
+ */
+ ata_link_for_each_dev(dev, &ap->link) {
+ ata_acpi_clear_gtf(dev);
+ dev->flags |= ATA_DFLAG_ACPI_PENDING;
+ }
+ }
}
/**
struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &ap->link.eh_context;
int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
+ int nr_executed = 0;
int rc;
if (!dev->acpi_handle)
}
/* do _GTF */
- rc = ata_acpi_exec_tfs(dev);
- if (rc < 0)
+ rc = ata_acpi_exec_tfs(dev, &nr_executed);
+ if (rc)
goto acpi_err;
dev->flags &= ~ATA_DFLAG_ACPI_PENDING;
/* refresh IDENTIFY page if any _GTF command has been executed */
- if (rc > 0) {
+ if (nr_executed) {
rc = ata_dev_reread_id(dev, 0);
if (rc < 0) {
ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY "
return 0;
acpi_err:
- /* let EH retry on the first failure, disable ACPI on the second */
- if (dev->flags & ATA_DFLAG_ACPI_FAILED) {
- ata_dev_printk(dev, KERN_WARNING, "ACPI on devcfg failed the "
- "second time, disabling (errno=%d)\n", rc);
-
- dev->acpi_handle = NULL;
+ /* ignore evaluation failure if we can continue safely */
+ if (rc == -EINVAL && !nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN))
+ return 0;
- /* if port is working, request IDENTIFY reload and continue */
- if (!(ap->pflags & ATA_PFLAG_FROZEN))
- rc = 1;
+ /* fail and let EH retry once more for unknown IO errors */
+ if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) {
+ dev->flags |= ATA_DFLAG_ACPI_FAILED;
+ return rc;
}
- dev->flags |= ATA_DFLAG_ACPI_FAILED;
+
+ ata_dev_printk(dev, KERN_WARNING,
+ "ACPI: failed the second time, disabled\n");
+ dev->acpi_handle = NULL;
+
+ /* We can safely continue if no _GTF command has been executed
+ * and port is not frozen.
+ */
+ if (!nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN))
+ return 0;
+
return rc;
}
+
+/**
+ * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled
+ * @dev: target ATA device
+ *
+ * This function is called when @dev is about to be disabled.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_acpi_on_disable(struct ata_device *dev)
+{
+ ata_acpi_clear_gtf(dev);
+}
#include <linux/libata.h>
#include <asm/semaphore.h>
#include <asm/byteorder.h>
+#include <linux/cdrom.h>
#include "libata.h"
if (ata_dev_enabled(dev)) {
if (ata_msg_drv(dev->link->ap))
ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_acpi_on_disable(dev);
ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
ATA_DNXFER_QUIET);
dev->class++;
/* clear SError */
if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
sata_scr_write(link, SCR_ERROR, serror);
+ link->eh_info.serror = 0;
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
{ "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ },
{ "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ },
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
+ { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
}
/**
+ * atapi_qc_may_overflow - Check whether data transfer may overflow
+ * @qc: ATA command in question
+ *
+ * ATAPI commands which transfer variable length data to host
+ * might overflow due to application error or hardare bug. This
+ * function checks whether overflow should be drained and ignored
+ * for @qc.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if @qc may overflow; otherwise, 0.
+ */
+static int atapi_qc_may_overflow(struct ata_queued_cmd *qc)
+{
+ if (qc->tf.protocol != ATA_PROT_ATAPI &&
+ qc->tf.protocol != ATA_PROT_ATAPI_DMA)
+ return 0;
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ return 0;
+
+ switch (qc->cdb[0]) {
+ case READ_10:
+ case READ_12:
+ case WRITE_10:
+ case WRITE_12:
+ case GPCMD_READ_CD:
+ case GPCMD_READ_CD_MSF:
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
* ata_std_qc_defer - Check whether a qc needs to be deferred
* @qc: ATA command in question
*
* Inherited from caller.
*
*/
-
-static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
+static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->__sg;
- struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem);
struct ata_port *ap = qc->ap;
+ struct ata_eh_info *ehi = &qc->dev->link->eh_info;
+ struct scatterlist *sg;
struct page *page;
unsigned char *buf;
unsigned int offset, count;
- int no_more_sg = 0;
-
- if (qc->curbytes + bytes >= qc->nbytes)
- ap->hsm_task_state = HSM_ST_LAST;
next_sg:
- if (unlikely(no_more_sg)) {
+ sg = qc->cursg;
+ if (unlikely(!sg)) {
/*
* The end of qc->sg is reached and the device expects
* more data to transfer. In order not to overrun qc->sg
* - for write case, padding zero data to the device
*/
u16 pad_buf[1] = { 0 };
- unsigned int words = bytes >> 1;
unsigned int i;
- if (words) /* warning if bytes > 1 */
- ata_dev_printk(qc->dev, KERN_WARNING,
- "%u bytes trailing data\n", bytes);
+ if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) {
+ ata_ehi_push_desc(ehi, "too much trailing data "
+ "buf=%u cur=%u bytes=%u",
+ qc->nbytes, qc->curbytes, bytes);
+ return -1;
+ }
- for (i = 0; i < words; i++)
+ /* overflow is exptected for misc ATAPI commands */
+ if (bytes && !atapi_qc_may_overflow(qc))
+ ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes "
+ "trailing data (cdb=%02x nbytes=%u)\n",
+ bytes, qc->cdb[0], qc->nbytes);
+
+ for (i = 0; i < (bytes + 1) / 2; i++)
ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write);
- ap->hsm_task_state = HSM_ST_LAST;
- return;
- }
+ qc->curbytes += bytes;
- sg = qc->cursg;
+ return 0;
+ }
page = sg_page(sg);
offset = sg->offset + qc->cursg_ofs;
}
bytes -= count;
+ if ((count & 1) && bytes)
+ bytes--;
qc->curbytes += count;
qc->cursg_ofs += count;
if (qc->cursg_ofs == sg->length) {
- if (qc->cursg == lsg)
- no_more_sg = 1;
-
qc->cursg = sg_next(qc->cursg);
qc->cursg_ofs = 0;
}
if (bytes)
goto next_sg;
+
+ return 0;
}
/**
VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
- __atapi_pio_bytes(qc, bytes);
+ if (__atapi_pio_bytes(qc, bytes))
+ goto err_out;
ata_altstatus(ap); /* flush */
return;
ata_port_wait_eh(ap);
- /* EH is now guaranteed to see UNLOADING, so no new device
- * will be attached. Disable all existing devices.
+ /* EH is now guaranteed to see UNLOADING - EH context belongs
+ * to us. Disable all existing devices.
*/
- spin_lock_irqsave(ap->lock, flags);
-
ata_port_for_each_link(link, ap) {
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
- spin_unlock_irqrestore(ap->lock, flags);
-
/* Final freeze & EH. All in-flight commands are aborted. EH
* will be skipped and retrials will be terminated with bad
* target.
for (i = 0; i < host->n_ports; i++)
ata_port_detach(host->ports[i]);
+
+ /* the host is dead now, dissociate ACPI */
+ ata_acpi_dissociate(host);
}
/**
tf.feature |= ATAPI_PKT_DMA;
} else {
tf.protocol = ATA_PROT_ATAPI;
- tf.lbam = (8 * 1024) & 0xff;
- tf.lbah = (8 * 1024) >> 8;
+ tf.lbam = SCSI_SENSE_BUFFERSIZE;
+ tf.lbah = 0;
}
return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
#ifdef CONFIG_ATA_ACPI
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
extern void ata_acpi_associate(struct ata_host *host);
+extern void ata_acpi_dissociate(struct ata_host *host);
extern int ata_acpi_on_suspend(struct ata_port *ap);
extern void ata_acpi_on_resume(struct ata_port *ap);
-extern int ata_acpi_on_devcfg(struct ata_device *adev);
+extern int ata_acpi_on_devcfg(struct ata_device *dev);
+extern void ata_acpi_on_disable(struct ata_device *dev);
#else
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
static inline void ata_acpi_associate(struct ata_host *host) { }
+static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
-static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
+static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; }
+static inline void ata_acpi_on_disable(struct ata_device *dev) { }
#endif
/* libata-scsi.c */
pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
pci_read_config_byte(pdev, 0x5A, &ata66);
/* Reset TCBLID/FCBLID to output */
- pci_write_config_word(pdev, 0x52, mcr3);
+ pci_write_config_word(pdev, mcrbase + 2, mcr3);
if (ata66 & (2 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
if (pdev->vendor == PCI_VENDOR_ID_TTI &&
(pdev->device == 0x2300 || pdev->device == 0x2310))
{
- printk(KERN_WARNING "sata_mv: Highpoint RocketRAID BIOS"
- " will CORRUPT DATA on attached drives when"
- " configured as \"Legacy\". BEWARE!\n");
- printk(KERN_WARNING "sata_mv: Use BIOS \"JBOD\" volumes"
- " instead for safety.\n");
+ /*
+ * Highpoint RocketRAID PCIe 23xx series cards:
+ *
+ * Unconfigured drives are treated as "Legacy"
+ * by the BIOS, and it overwrites sector 8 with
+ * a "Lgcy" metadata block prior to Linux boot.
+ *
+ * Configured drives (RAID or JBOD) leave sector 8
+ * alone, but instead overwrite a high numbered
+ * sector for the RAID metadata. This sector can
+ * be determined exactly, by truncating the physical
+ * drive capacity to a nice even GB value.
+ *
+ * RAID metadata is at: (dev->n_sectors & ~0xfffff)
+ *
+ * Warn the user, lest they think we're just buggy.
+ */
+ printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
+ " BIOS CORRUPTS DATA on all attached drives,"
+ " regardless of if/how they are configured."
+ " BEWARE!\n");
+ printk(KERN_WARNING DRV_NAME ": For data safety, do not"
+ " use sectors 8-9 on \"Legacy\" drives,"
+ " and avoid the final two gigabytes on"
+ " all RocketRAID BIOS initialized drives.\n");
}
case chip_6042:
hpriv->ops = &mv6xxx_ops;
sil_scr_read(ap, SCR_ERROR, &serror);
sil_scr_write(ap, SCR_ERROR, serror);
- /* Trigger hotplug and accumulate SError only if the
- * port isn't already frozen. Otherwise, PHY events
- * during hardreset makes controllers with broken SIEN
- * repeat probing needlessly.
+ /* Sometimes spurious interrupts occur, double check
+ * it's PHYRDY CHG.
*/
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- ata_ehi_hotplugged(&ap->link.eh_info);
+ if (serror & SERR_PHYRDY_CHG) {
ap->link.eh_info.serror |= serror;
+ goto freeze;
}
- goto freeze;
+ if (!(bmdma2 & SIL_DMA_COMPLETE))
+ return;
}
- if (unlikely(!qc))
- goto freeze;
-
- if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
ata_chk_status(ap);
return;
"packet purged",
"packet ageing timeout",
"channel ageing timeout",
- "calculated lenght error",
- "programmed lenght limit error",
+ "calculated length error",
+ "programmed length limit error",
"aal5 crc32 error",
"oam transp or transpc crc10 error",
"reserved 25",
return 0;
}
-
+#ifdef CONFIG_ATM_FORE200E_PCA
static int __devinit
fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
{
}
-#ifdef CONFIG_ATM_FORE200E_PCA
static struct pci_device_id fore200e_pca_tbl[] = {
{ PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID,
0, 0, (unsigned long) &fore200e_bus[0] },
p->kobj.parent = parent;
p->kobj.ktype = ktype;
p->pd = pd;
- if (kobject_register(&p->kobj) != 0)
+ if (kobject_register(&p->kobj) != 0) {
+ kobject_put(&p->kobj);
return NULL;
+ }
return p;
}
/*
* - set initialised bit then.
*/
-//#define DEBUG /* uncomment if you want debugging info (pr_debug) */
+#undef DEBUG /* #define DEBUG if you want debugging info (pr_debug) */
#include <linux/fs.h>
#include <linux/bio.h>
#include <linux/kernel.h>
static struct block_device_operations mm_fops;
static struct timer_list battery_timer;
-static int num_cards = 0;
+static int num_cards;
static struct gendisk *mm_gendisk[MM_MAXCARDS];
static void check_batteries(struct cardinfo *card);
-/*
------------------------------------------------------------------------------------
--- get_userbit
------------------------------------------------------------------------------------
-*/
static int get_userbit(struct cardinfo *card, int bit)
{
unsigned char led;
led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL);
return led & bit;
}
-/*
------------------------------------------------------------------------------------
--- set_userbit
------------------------------------------------------------------------------------
-*/
+
static int set_userbit(struct cardinfo *card, int bit, unsigned char state)
{
unsigned char led;
return 0;
}
-/*
------------------------------------------------------------------------------------
--- set_led
------------------------------------------------------------------------------------
-*/
+
/*
* NOTE: For the power LED, use the LED_POWER_* macros since they differ
*/
}
#ifdef MM_DIAG
-/*
------------------------------------------------------------------------------------
--- dump_regs
------------------------------------------------------------------------------------
-*/
static void dump_regs(struct cardinfo *card)
{
unsigned char *p;
}
}
#endif
-/*
------------------------------------------------------------------------------------
--- dump_dmastat
------------------------------------------------------------------------------------
-*/
+
static void dump_dmastat(struct cardinfo *card, unsigned int dmastat)
{
dev_printk(KERN_DEBUG, &card->dev->dev, "DMAstat - ");
if (dmastat & DMASCR_ANY_ERR)
- printk("ANY_ERR ");
+ printk(KERN_CONT "ANY_ERR ");
if (dmastat & DMASCR_MBE_ERR)
- printk("MBE_ERR ");
+ printk(KERN_CONT "MBE_ERR ");
if (dmastat & DMASCR_PARITY_ERR_REP)
- printk("PARITY_ERR_REP ");
+ printk(KERN_CONT "PARITY_ERR_REP ");
if (dmastat & DMASCR_PARITY_ERR_DET)
- printk("PARITY_ERR_DET ");
+ printk(KERN_CONT "PARITY_ERR_DET ");
if (dmastat & DMASCR_SYSTEM_ERR_SIG)
- printk("SYSTEM_ERR_SIG ");
+ printk(KERN_CONT "SYSTEM_ERR_SIG ");
if (dmastat & DMASCR_TARGET_ABT)
- printk("TARGET_ABT ");
+ printk(KERN_CONT "TARGET_ABT ");
if (dmastat & DMASCR_MASTER_ABT)
- printk("MASTER_ABT ");
+ printk(KERN_CONT "MASTER_ABT ");
if (dmastat & DMASCR_CHAIN_COMPLETE)
- printk("CHAIN_COMPLETE ");
+ printk(KERN_CONT "CHAIN_COMPLETE ");
if (dmastat & DMASCR_DMA_COMPLETE)
- printk("DMA_COMPLETE ");
+ printk(KERN_CONT "DMA_COMPLETE ");
printk("\n");
}
/* make the last descriptor end the chain */
page = &card->mm_pages[card->Active];
- pr_debug("start_io: %d %d->%d\n", card->Active, page->headcnt, page->cnt-1);
+ pr_debug("start_io: %d %d->%d\n",
+ card->Active, page->headcnt, page->cnt - 1);
desc = &page->desc[page->cnt-1];
desc->control_bits |= cpu_to_le32(DMASCR_CHAIN_COMP_EN);
writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR);
writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR + 4);
- offset = ((char*)desc) - ((char*)page->desc);
- writel(cpu_to_le32((page->page_dma+offset)&0xffffffff),
+ offset = ((char *)desc) - ((char *)page->desc);
+ writel(cpu_to_le32((page->page_dma+offset) & 0xffffffff),
card->csr_remap + DMA_DESCRIPTOR_ADDR);
/* Force the value to u64 before shifting otherwise >> 32 is undefined C
* and on some ports will do nothing ! */
page->cnt = 0;
page->headcnt = 0;
page->bio = NULL;
- page->biotail = & page->bio;
+ page->biotail = &page->bio;
}
static void mm_unplug_device(struct request_queue *q)
vec->bv_page,
vec->bv_offset,
len,
- (rw==READ) ?
+ (rw == READ) ?
PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
p = &card->mm_pages[card->Ready];
desc->pci_addr = cpu_to_le64((u64)desc->data_dma_handle);
desc->local_addr = cpu_to_le64(card->current_sector << 9);
desc->transfer_size = cpu_to_le32(len);
- offset = ( ((char*)&desc->sem_control_bits) - ((char*)p->desc));
+ offset = (((char *)&desc->sem_control_bits) - ((char *)p->desc));
desc->sem_addr = cpu_to_le64((u64)(p->page_dma+offset));
desc->zero1 = desc->zero2 = 0;
- offset = ( ((char*)(desc+1)) - ((char*)p->desc));
+ offset = (((char *)(desc+1)) - ((char *)p->desc));
desc->next_desc_addr = cpu_to_le64(p->page_dma+offset);
desc->control_bits = cpu_to_le32(DMASCR_GO|DMASCR_ERR_INT_EN|
DMASCR_PARITY_INT_EN|
/* check if any of the requests in the page are DMA_COMPLETE,
* and deal with them appropriately.
* If we find a descriptor without DMA_COMPLETE in the semaphore, then
- * dma must have hit an error on that descriptor, so use dma_status instead
- * and assume that all following descriptors must be re-tried.
+ * dma must have hit an error on that descriptor, so use dma_status
+ * instead and assume that all following descriptors must be re-tried.
*/
struct mm_page *page;
- struct bio *return_bio=NULL;
+ struct bio *return_bio = NULL;
struct cardinfo *card = (struct cardinfo *)data;
unsigned int dma_status = card->dma_status;
struct bio *bio = page->bio;
struct mm_dma_desc *desc = &page->desc[page->headcnt];
int control = le32_to_cpu(desc->sem_control_bits);
- int last=0;
+ int last = 0;
int idx;
if (!(control & DMASCR_DMA_COMPLETE)) {
control = dma_status;
- last=1;
+ last = 1;
}
page->headcnt++;
idx = page->idx;
}
pci_unmap_page(card->dev, desc->data_dma_handle,
- bio_iovec_idx(bio,idx)->bv_len,
- (control& DMASCR_TRANSFER_READ) ?
+ bio_iovec_idx(bio, idx)->bv_len,
+ (control & DMASCR_TRANSFER_READ) ?
PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
if (control & DMASCR_HARD_ERROR) {
/* error */
le32_to_cpu(desc->transfer_size));
dump_dmastat(card, control);
} else if (test_bit(BIO_RW, &bio->bi_rw) &&
- le32_to_cpu(desc->local_addr)>>9 == card->init_size) {
- card->init_size += le32_to_cpu(desc->transfer_size)>>9;
- if (card->init_size>>1 >= card->mm_size) {
+ le32_to_cpu(desc->local_addr) >> 9 ==
+ card->init_size) {
+ card->init_size += le32_to_cpu(desc->transfer_size) >> 9;
+ if (card->init_size >> 1 >= card->mm_size) {
dev_printk(KERN_INFO, &card->dev->dev,
"memory now initialised\n");
set_userbit(card, MEMORY_INITIALIZED, 1);
return_bio = bio;
}
- if (last) break;
+ if (last)
+ break;
}
if (debug & DEBUG_LED_ON_TRANSFER)
out_unlock:
spin_unlock_bh(&card->lock);
- while(return_bio) {
+ while (return_bio) {
struct bio *bio = return_bio;
return_bio = bio->bi_next;
}
}
-/*
------------------------------------------------------------------------------------
--- mm_make_request
------------------------------------------------------------------------------------
-*/
static int mm_make_request(struct request_queue *q, struct bio *bio)
{
struct cardinfo *card = q->queuedata;
return 0;
}
-/*
------------------------------------------------------------------------------------
--- mm_interrupt
------------------------------------------------------------------------------------
-*/
static irqreturn_t mm_interrupt(int irq, void *__card)
{
struct cardinfo *card = (struct cardinfo *) __card;
if (!(dma_status & (DMASCR_ERROR_MASK | DMASCR_CHAIN_COMPLETE))) {
/* interrupt wasn't for me ... */
return IRQ_NONE;
- }
+ }
/* clear COMPLETION interrupts */
if (card->flags & UM_FLAG_NO_BYTE_STATUS)
writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE),
- card->csr_remap+ DMA_STATUS_CTRL);
+ card->csr_remap + DMA_STATUS_CTRL);
else
writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16,
- card->csr_remap+ DMA_STATUS_CTRL + 2);
+ card->csr_remap + DMA_STATUS_CTRL + 2);
/* log errors and clear interrupt status */
if (dma_status & DMASCR_ANY_ERR) {
stat = readb(card->csr_remap + MEMCTRLCMD_ERRSTATUS);
- data_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG));
- data_log2 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG + 4));
- addr_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_ADDR_LOG));
+ data_log1 = le32_to_cpu(readl(card->csr_remap +
+ ERROR_DATA_LOG));
+ data_log2 = le32_to_cpu(readl(card->csr_remap +
+ ERROR_DATA_LOG + 4));
+ addr_log1 = le32_to_cpu(readl(card->csr_remap +
+ ERROR_ADDR_LOG));
addr_log2 = readb(card->csr_remap + ERROR_ADDR_LOG + 4);
count = readb(card->csr_remap + ERROR_COUNT);
return IRQ_HANDLED;
}
-/*
------------------------------------------------------------------------------------
--- set_fault_to_battery_status
------------------------------------------------------------------------------------
-*/
+
/*
* If both batteries are good, no LED
* If either battery has been warned, solid LED
static void init_battery_timer(void);
-
-/*
------------------------------------------------------------------------------------
--- check_battery
------------------------------------------------------------------------------------
-*/
static int check_battery(struct cardinfo *card, int battery, int status)
{
if (status != card->battery[battery].good) {
return 0;
}
-/*
------------------------------------------------------------------------------------
--- check_batteries
------------------------------------------------------------------------------------
-*/
+
static void check_batteries(struct cardinfo *card)
{
/* NOTE: this must *never* be called while the card
init_battery_timer();
}
-/*
------------------------------------------------------------------------------------
--- init_battery_timer
------------------------------------------------------------------------------------
-*/
+
static void init_battery_timer(void)
{
init_timer(&battery_timer);
battery_timer.expires = jiffies + (HZ * 60);
add_timer(&battery_timer);
}
-/*
------------------------------------------------------------------------------------
--- del_battery_timer
------------------------------------------------------------------------------------
-*/
+
static void del_battery_timer(void)
{
del_timer(&battery_timer);
}
-/*
------------------------------------------------------------------------------------
--- mm_revalidate
------------------------------------------------------------------------------------
-*/
+
/*
* Note no locks taken out here. In a worst case scenario, we could drop
* a chunk of system memory. But that should never happen, since validation
}
/*
------------------------------------------------------------------------------------
--- mm_check_change
------------------------------------------------------------------------------------
- Future support for removable devices
-*/
+ * Future support for removable devices
+ */
static int mm_check_change(struct gendisk *disk)
{
/* struct cardinfo *dev = disk->private_data; */
return 0;
}
-/*
------------------------------------------------------------------------------------
--- mm_fops
------------------------------------------------------------------------------------
-*/
+
static struct block_device_operations mm_fops = {
.owner = THIS_MODULE,
.getgeo = mm_getgeo,
- .revalidate_disk= mm_revalidate,
+ .revalidate_disk = mm_revalidate,
.media_changed = mm_check_change,
};
-/*
------------------------------------------------------------------------------------
--- mm_pci_probe
------------------------------------------------------------------------------------
-*/
-static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+
+static int __devinit mm_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
int ret = -ENODEV;
struct cardinfo *card = &cards[num_cards];
return -ENODEV;
dev_printk(KERN_INFO, &dev->dev,
- "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n");
+ "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n");
if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
"CSR 0x%08lx -> 0x%p (0x%lx)\n",
csr_base, card->csr_remap, csr_len);
- switch(card->dev->device) {
+ switch (card->dev->device) {
case 0x5415:
card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG;
magic_number = 0x59;
break;
case 0x6155:
- card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT;
+ card->flags |= UM_FLAG_NO_BYTE_STATUS |
+ UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT;
magic_number = 0x99;
break;
}
card->mm_pages[0].desc = pci_alloc_consistent(card->dev,
- PAGE_SIZE*2,
- &card->mm_pages[0].page_dma);
+ PAGE_SIZE * 2,
+ &card->mm_pages[0].page_dma);
card->mm_pages[1].desc = pci_alloc_consistent(card->dev,
- PAGE_SIZE*2,
- &card->mm_pages[1].page_dma);
+ PAGE_SIZE * 2,
+ &card->mm_pages[1].page_dma);
if (card->mm_pages[0].desc == NULL ||
card->mm_pages[1].desc == NULL) {
dev_printk(KERN_ERR, &card->dev->dev, "alloc failed\n");
dev_printk(KERN_INFO, &card->dev->dev,
"Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n",
card->mm_size,
- (batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled"),
+ batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled",
card->battery[0].good ? "OK" : "FAILURE",
- (batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled"),
+ batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled",
card->battery[1].good ? "OK" : "FAILURE");
set_fault_to_battery_status(card);
data = ~data;
data += 1;
- if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME, card)) {
+ if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME,
+ card)) {
dev_printk(KERN_ERR, &card->dev->dev,
"Unable to allocate IRQ\n");
ret = -ENODEV;
-
goto failed_req_irq;
}
dev_printk(KERN_INFO, &card->dev->dev,
"Window size %d bytes, IRQ %d\n", data, dev->irq);
- spin_lock_init(&card->lock);
+ spin_lock_init(&card->lock);
pci_set_drvdata(dev, card);
if (!get_userbit(card, MEMORY_INITIALIZED)) {
dev_printk(KERN_INFO, &card->dev->dev,
- "memory NOT initialized. Consider over-writing whole device.\n");
+ "memory NOT initialized. Consider over-writing whole device.\n");
card->init_size = 0;
} else {
dev_printk(KERN_INFO, &card->dev->dev,
return ret;
}
-/*
------------------------------------------------------------------------------------
--- mm_pci_remove
------------------------------------------------------------------------------------
-*/
+
static void mm_pci_remove(struct pci_dev *dev)
{
struct cardinfo *card = pci_get_drvdata(dev);
}
static const struct pci_device_id mm_pci_ids[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5415CN)},
- {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5425CN)},
- {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_6155)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5415CN)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5425CN)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_6155)},
{
.vendor = 0x8086,
.device = 0xB555,
- .subvendor= 0x1332,
- .subdevice= 0x5460,
- .class = 0x050000,
- .class_mask= 0,
+ .subvendor = 0x1332,
+ .subdevice = 0x5460,
+ .class = 0x050000,
+ .class_mask = 0,
}, { /* end: all zeroes */ }
};
.remove = mm_pci_remove,
};
-/*
------------------------------------------------------------------------------------
--- mm_init
------------------------------------------------------------------------------------
-*/
-
static int __init mm_init(void)
{
int retval, i;
put_disk(mm_gendisk[i]);
return -ENOMEM;
}
-/*
------------------------------------------------------------------------------------
--- mm_cleanup
------------------------------------------------------------------------------------
-*/
+
static void __exit mm_cleanup(void)
{
int i;
del_battery_timer();
- for (i=0; i < num_cards ; i++) {
+ for (i = 0; i < num_cards ; i++) {
del_gendisk(mm_gendisk[i]);
put_disk(mm_gendisk[i]);
}
If unsure, say N.
-config TIPAR
- tristate "Texas Instruments parallel link cable support"
- depends on PARPORT
- ---help---
- If you own a Texas Instruments graphing calculator and use a
- parallel link cable, then you might be interested in this driver.
-
- If you enable this driver, you will be able to communicate with
- your calculator through a set of device nodes under /dev. The
- main advantage of this driver is that you don't have to be root
- to use this precise link cable (depending on the permissions on
- the device nodes, though).
-
- To compile this driver as a module, choose M here: the
- module will be called tipar.
-
- If you don't know what a parallel link cable is or what a Texas
- Instruments graphing calculator is, then you probably don't need this
- driver.
-
- If unsure, say N.
-
config HVC_DRIVER
bool
help
return 0;
case WDIOC_SET_PRETIMEOUT:
+ case WDIOC_SETPRETIMEOUT:
i = copy_from_user(&val, argp, sizeof(int));
if (i)
return -EFAULT;
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
case WDIOC_GET_PRETIMEOUT:
+ case WDIOC_GETPRETIMEOUT:
i = copy_to_user(argp, &pretimeout, sizeof(pretimeout));
if (i)
return -EFAULT;
+++ /dev/null
-/* Hey EMACS -*- linux-c -*-
- *
- * tipar - low level driver for handling a parallel link cable designed
- * for Texas Instruments graphing calculators (http://lpg.ticalc.org).
- * A part of the TiLP project.
- *
- * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
- * under the terms of the GNU General Public License.
- *
- * Various fixes & clean-up from the Linux Kernel Mailing List
- * (Alan Cox, Richard B. Johnson, Christoph Hellwig).
- */
-
-/* This driver should, in theory, work with any parallel port that has an
- * appropriate low-level driver; all I/O is done through the parport
- * abstraction layer.
- *
- * If this driver is built into the kernel, you can configure it using the
- * kernel command-line. For example:
- *
- * tipar=timeout,delay (set timeout and delay)
- *
- * If the driver is loaded as a module, similar functionality is available
- * using module parameters. The equivalent of the above commands would be:
- *
- * # insmod tipar timeout=15 delay=10
- */
-
-/* COMPATIBILITY WITH OLD KERNELS
- *
- * Usually, parallel cables were bound to ports at
- * particular I/O addresses, as follows:
- *
- * tipar0 0x378
- * tipar1 0x278
- * tipar2 0x3bc
- *
- *
- * This driver, by default, binds tipar devices according to parport and
- * the minor number.
- *
- */
-#undef DEBUG /* change to #define to get debugging
- * output - for pr_debug() */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/fcntl.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/parport.h> /* Our code depend on parport */
-#include <linux/device.h>
-
-/*
- * TI definitions
- */
-#include <linux/ticable.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "1.19"
-#define DRIVER_AUTHOR "Romain Lievin <roms@lpg.ticalc.org>"
-#define DRIVER_DESC "Device driver for TI/PC parallel link cables"
-#define DRIVER_LICENSE "GPL"
-
-#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
-
-/* ----- global variables --------------------------------------------- */
-
-struct tipar_struct {
- struct pardevice *dev; /* Parport device entry */
-};
-
-#define PP_NO 3
-static struct tipar_struct table[PP_NO];
-
-static int delay = IO_DELAY; /* inter-bit delay in microseconds */
-static int timeout = TIMAXTIME; /* timeout in tenth of seconds */
-
-static unsigned int tp_count; /* tipar count */
-static unsigned long opened; /* opened devices */
-
-static struct class *tipar_class;
-
-/* --- macros for parport access -------------------------------------- */
-
-#define r_dtr(x) (parport_read_data(table[(x)].dev->port))
-#define r_str(x) (parport_read_status(table[(x)].dev->port))
-#define w_ctr(x,y) (parport_write_control(table[(x)].dev->port, (y)))
-#define w_dtr(x,y) (parport_write_data(table[(x)].dev->port, (y)))
-
-/* --- setting states on the D-bus with the right timing: ------------- */
-
-static inline void
-outbyte(int value, int minor)
-{
- w_dtr(minor, value);
-}
-
-static inline int
-inbyte(int minor)
-{
- return (r_str(minor));
-}
-
-static inline void
-init_ti_parallel(int minor)
-{
- outbyte(3, minor);
-}
-
-/* ----- global defines ----------------------------------------------- */
-
-#define START(x) { x = jiffies + (HZ * timeout) / 10; }
-#define WAIT(x) { \
- if (time_before((x), jiffies)) return -1; \
- if (need_resched()) schedule(); }
-
-/* ----- D-bus bit-banging functions ---------------------------------- */
-
-/* D-bus protocol (45kbit/s max):
- 1 0 0
- _______ ______|______ __________|________ __________
-Red : ________ | ____ | ____
- _ ____________|________ ______|__________ _____
-White: ________ | ______ | _______
-*/
-
-/* Try to transmit a byte on the specified port (-1 if error). */
-static int
-put_ti_parallel(int minor, unsigned char data)
-{
- unsigned int bit;
- unsigned long max;
-
- for (bit = 0; bit < 8; bit++) {
- if (data & 1) {
- outbyte(2, minor);
- START(max);
- do {
- WAIT(max);
- } while (inbyte(minor) & 0x10);
-
- outbyte(3, minor);
- START(max);
- do {
- WAIT(max);
- } while (!(inbyte(minor) & 0x10));
- } else {
- outbyte(1, minor);
- START(max);
- do {
- WAIT(max);
- } while (inbyte(minor) & 0x20);
-
- outbyte(3, minor);
- START(max);
- do {
- WAIT(max);
- } while (!(inbyte(minor) & 0x20));
- }
-
- data >>= 1;
- udelay(delay);
-
- if (need_resched())
- schedule();
- }
-
- return 0;
-}
-
-/* Receive a byte on the specified port or -1 if error. */
-static int
-get_ti_parallel(int minor)
-{
- unsigned int bit;
- unsigned char v, data = 0;
- unsigned long max;
-
- for (bit = 0; bit < 8; bit++) {
- START(max);
- do {
- WAIT(max);
- } while ((v = inbyte(minor) & 0x30) == 0x30);
-
- if (v == 0x10) {
- data = (data >> 1) | 0x80;
- outbyte(1, minor);
- START(max);
- do {
- WAIT(max);
- } while (!(inbyte(minor) & 0x20));
- outbyte(3, minor);
- } else {
- data = data >> 1;
- outbyte(2, minor);
- START(max);
- do {
- WAIT(max);
- } while (!(inbyte(minor) & 0x10));
- outbyte(3, minor);
- }
-
- udelay(delay);
- if (need_resched())
- schedule();
- }
-
- return (int) data;
-}
-
-/* Try to detect a parallel link cable on the specified port */
-static int
-probe_ti_parallel(int minor)
-{
- int i;
- int seq[] = { 0x00, 0x20, 0x10, 0x30 };
- int data;
-
- for (i = 3; i >= 0; i--) {
- outbyte(3, minor);
- outbyte(i, minor);
- udelay(delay);
- data = inbyte(minor) & 0x30;
- pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
- data, seq[i]);
- if (data != seq[i]) {
- outbyte(3, minor);
- return -1;
- }
- }
-
- outbyte(3, minor);
- return 0;
-}
-
-/* ----- kernel module functions--------------------------------------- */
-
-static int
-tipar_open(struct inode *inode, struct file *file)
-{
- unsigned int minor = iminor(inode) - TIPAR_MINOR;
-
- if (tp_count == 0 || minor > tp_count - 1)
- return -ENXIO;
-
- if (test_and_set_bit(minor, &opened))
- return -EBUSY;
-
- if (!table[minor].dev) {
- printk(KERN_ERR "%s: NULL device for minor %u\n",
- __FUNCTION__, minor);
- return -ENXIO;
- }
- parport_claim_or_block(table[minor].dev);
- init_ti_parallel(minor);
- parport_release(table[minor].dev);
-
- return nonseekable_open(inode, file);
-}
-
-static int
-tipar_close(struct inode *inode, struct file *file)
-{
- unsigned int minor = iminor(inode) - TIPAR_MINOR;
-
- if (minor > tp_count - 1)
- return -ENXIO;
-
- clear_bit(minor, &opened);
-
- return 0;
-}
-
-static ssize_t
-tipar_write (struct file *file, const char __user *buf, size_t count,
- loff_t * ppos)
-{
- unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
- ssize_t n;
-
- parport_claim_or_block(table[minor].dev);
-
- for (n = 0; n < count; n++) {
- unsigned char b;
-
- if (get_user(b, buf + n)) {
- n = -EFAULT;
- goto out;
- }
-
- if (put_ti_parallel(minor, b) == -1) {
- init_ti_parallel(minor);
- n = -ETIMEDOUT;
- goto out;
- }
- }
- out:
- parport_release(table[minor].dev);
- return n;
-}
-
-static ssize_t
-tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
- int b = 0;
- unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
- ssize_t retval = 0;
- ssize_t n = 0;
-
- if (count == 0)
- return 0;
-
- parport_claim_or_block(table[minor].dev);
-
- while (n < count) {
- b = get_ti_parallel(minor);
- if (b == -1) {
- init_ti_parallel(minor);
- retval = -ETIMEDOUT;
- goto out;
- } else {
- if (put_user(b, buf + n)) {
- retval = -EFAULT;
- break;
- } else
- retval = ++n;
- }
-
- /* Non-blocking mode : try again ! */
- if (file->f_flags & O_NONBLOCK) {
- retval = -EAGAIN;
- goto out;
- }
-
- /* Signal pending, try again ! */
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- goto out;
- }
-
- if (need_resched())
- schedule();
- }
-
- out:
- parport_release(table[minor].dev);
- return retval;
-}
-
-static int
-tipar_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int retval = 0;
-
- switch (cmd) {
- case IOCTL_TIPAR_DELAY:
- delay = (int)arg; //get_user(delay, &arg);
- break;
- case IOCTL_TIPAR_TIMEOUT:
- if (arg != 0)
- timeout = (int)arg;
- else
- retval = -EINVAL;
- break;
- default:
- retval = -ENOTTY;
- break;
- }
-
- return retval;
-}
-
-/* ----- kernel module registering ------------------------------------ */
-
-static const struct file_operations tipar_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = tipar_read,
- .write = tipar_write,
- .ioctl = tipar_ioctl,
- .open = tipar_open,
- .release = tipar_close,
-};
-
-/* --- initialisation code ------------------------------------- */
-
-#ifndef MODULE
-/* You must set these - there is no sane way to probe for this cable.
- * You can use 'tipar=timeout,delay' to set these now. */
-static int __init
-tipar_setup(char *str)
-{
- int ints[3];
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0) {
- if (ints[1] != 0)
- timeout = ints[1];
- else
- printk(KERN_WARNING "tipar: bad timeout value (0), "
- "using default value instead");
- if (ints[0] > 1) {
- delay = ints[2];
- }
- }
-
- return 1;
-}
-#endif
-
-/*
- * Register our module into parport.
- * Pass also 2 callbacks functions to parport: a pre-emptive function and an
- * interrupt handler function (unused).
- * Display a message such "tipar0: using parport0 (polling)".
- */
-static int
-tipar_register(int nr, struct parport *port)
-{
- int err = 0;
-
- /* Register our module into parport */
- table[nr].dev = parport_register_device(port, "tipar",
- NULL, NULL, NULL, 0,
- (void *) &table[nr]);
-
- if (table[nr].dev == NULL) {
- err = 1;
- goto out;
- }
-
- device_create(tipar_class, port->dev, MKDEV(TIPAR_MAJOR,
- TIPAR_MINOR + nr), "par%d", nr);
-
- /* Display informations */
- pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
- PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
-
- if (probe_ti_parallel(nr) != -1)
- pr_info("tipar%d: link cable found\n", nr);
- else
- pr_info("tipar%d: link cable not found\n", nr);
-
- err = 0;
-
-out:
- return err;
-}
-
-static void
-tipar_attach(struct parport *port)
-{
- if (tp_count == PP_NO) {
- pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
- return;
- }
-
- if (!tipar_register(tp_count, port))
- tp_count++;
-}
-
-static void
-tipar_detach(struct parport *port)
-{
- /* Nothing to do */
-}
-
-static struct parport_driver tipar_driver = {
- .name = "tipar",
- .attach = tipar_attach,
- .detach = tipar_detach,
-};
-
-static int __init
-tipar_init_module(void)
-{
- int err = 0;
-
- pr_info("tipar: parallel link cable driver, version %s\n",
- DRIVER_VERSION);
-
- if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
- printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
- err = -EIO;
- goto out;
- }
-
- tipar_class = class_create(THIS_MODULE, "ticables");
- if (IS_ERR(tipar_class)) {
- err = PTR_ERR(tipar_class);
- goto out_chrdev;
- }
- if (parport_register_driver(&tipar_driver)) {
- printk(KERN_ERR "tipar: unable to register with parport\n");
- err = -EIO;
- goto out_class;
- }
-
- err = 0;
- goto out;
-
-out_class:
- class_destroy(tipar_class);
-
-out_chrdev:
- unregister_chrdev(TIPAR_MAJOR, "tipar");
-out:
- return err;
-}
-
-static void __exit
-tipar_cleanup_module(void)
-{
- unsigned int i;
-
- /* Unregistering module */
- parport_unregister_driver(&tipar_driver);
-
- unregister_chrdev(TIPAR_MAJOR, "tipar");
-
- for (i = 0; i < PP_NO; i++) {
- if (table[i].dev == NULL)
- continue;
- parport_unregister_device(table[i].dev);
- device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
- }
- class_destroy(tipar_class);
-
- pr_info("tipar: module unloaded\n");
-}
-
-/* --------------------------------------------------------------------- */
-
-__setup("tipar=", tipar_setup);
-module_init(tipar_init_module);
-module_exit(tipar_cleanup_module);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
-module_param(delay, int, 0);
-MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
- if (ret)
+ if (ret) {
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit;
+ }
drv_attr++;
}
if (cpufreq_driver->get){
ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
- if (ret)
+ if (ret) {
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit;
+ }
}
if (cpufreq_driver->target){
ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
- if (ret)
+ if (ret) {
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit;
+ }
}
spin_lock_irqsave(&cpufreq_driver_lock, flags);
return -1;
}
-static void __cpuexit cpufreq_stats_free_table(unsigned int cpu)
+static void cpufreq_stats_free_table(unsigned int cpu)
{
struct cpufreq_stats *stat = cpufreq_stats_table[cpu];
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
tx_to_ioat_desc(tx)->dst = addr;
}
+/**
+ * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
+ * descriptors to hw
+ * @chan: DMA channel handle
+ */
static inline void __ioat1_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan);
+ struct ioat_dma_chan *ioat_chan)
+{
+ ioat_chan->pending = 0;
+ writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET);
+}
+
+static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
+
+ if (ioat_chan->pending != 0) {
+ spin_lock_bh(&ioat_chan->desc_lock);
+ __ioat1_dma_memcpy_issue_pending(ioat_chan);
+ spin_unlock_bh(&ioat_chan->desc_lock);
+ }
+}
+
static inline void __ioat2_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan);
+ struct ioat_dma_chan *ioat_chan)
+{
+ ioat_chan->pending = 0;
+ writew(ioat_chan->dmacount,
+ ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
+}
+
+static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
+
+ if (ioat_chan->pending != 0) {
+ spin_lock_bh(&ioat_chan->desc_lock);
+ __ioat2_dma_memcpy_issue_pending(ioat_chan);
+ spin_unlock_bh(&ioat_chan->desc_lock);
+ }
+}
static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
{
prev = to_ioat_desc(ioat_chan->used_desc.prev);
prefetch(prev->hw);
do {
- copy = min((u32) len, ioat_chan->xfercap);
+ copy = min_t(size_t, len, ioat_chan->xfercap);
new->async_tx.ack = 1;
orig_ack = first->async_tx.ack;
new = first;
- /* ioat_chan->desc_lock is still in force in version 2 path */
-
+ /*
+ * ioat_chan->desc_lock is still in force in version 2 path
+ * it gets unlocked at end of this function
+ */
do {
- copy = min((u32) len, ioat_chan->xfercap);
+ copy = min_t(size_t, len, ioat_chan->xfercap);
new->async_tx.ack = 1;
static int ioat_dma_alloc_chan_resources(struct dma_chan *chan)
{
struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *desc = NULL;
+ struct ioat_desc_sw *desc;
u16 chanctrl;
u32 chanerr;
int i;
static struct ioat_desc_sw *
ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
{
- struct ioat_desc_sw *new = NULL;
+ struct ioat_desc_sw *new;
if (!list_empty(&ioat_chan->free_desc)) {
new = to_ioat_desc(ioat_chan->free_desc.next);
} else {
/* try to get another desc */
new = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- /* will this ever happen? */
- /* TODO add upper limit on these */
- BUG_ON(!new);
+ if (!new) {
+ dev_err(&ioat_chan->device->pdev->dev,
+ "alloc failed\n");
+ return NULL;
+ }
}
prefetch(new->hw);
static struct ioat_desc_sw *
ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
{
- struct ioat_desc_sw *new = NULL;
+ struct ioat_desc_sw *new;
/*
* used.prev points to where to start processing
if (ioat_chan->used_desc.prev &&
ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) {
- struct ioat_desc_sw *desc = NULL;
- struct ioat_desc_sw *noop_desc = NULL;
+ struct ioat_desc_sw *desc;
+ struct ioat_desc_sw *noop_desc;
int i;
/* set up the noop descriptor */
ioat_chan->pending++;
ioat_chan->dmacount++;
- /* get a few more descriptors */
+ /* try to get a few more descriptors */
for (i = 16; i; i--) {
desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- BUG_ON(!desc);
+ if (!desc) {
+ dev_err(&ioat_chan->device->pdev->dev,
+ "alloc failed\n");
+ break;
+ }
list_add_tail(&desc->node, ioat_chan->used_desc.next);
desc->hw->next
spin_lock_bh(&ioat_chan->desc_lock);
new = ioat_dma_get_next_descriptor(ioat_chan);
- new->len = len;
spin_unlock_bh(&ioat_chan->desc_lock);
- return new ? &new->async_tx : NULL;
+ if (new) {
+ new->len = len;
+ return &new->async_tx;
+ } else
+ return NULL;
}
static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
spin_lock_bh(&ioat_chan->desc_lock);
new = ioat2_dma_get_next_descriptor(ioat_chan);
- new->len = len;
-
- /* leave ioat_chan->desc_lock set in version 2 path */
- return new ? &new->async_tx : NULL;
-}
+ /*
+ * leave ioat_chan->desc_lock set in ioat 2 path
+ * it will get unlocked at end of tx_submit
+ */
-/**
- * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
- * descriptors to hw
- * @chan: DMA channel handle
- */
-static inline void __ioat1_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET);
-}
-
-static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending != 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat1_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
-}
-
-static inline void __ioat2_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writew(ioat_chan->dmacount,
- ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
-}
-
-static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending != 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
+ if (new) {
+ new->len = len;
+ return &new->async_tx;
+ } else
+ return NULL;
}
static void ioat_dma_cleanup_tasklet(unsigned long data)
static void ioat_dma_test_callback(void *dma_async_param)
{
printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
- dma_async_param);
+ dma_async_param);
}
/**
u8 *src;
u8 *dest;
struct dma_chan *dma_chan;
- struct dma_async_tx_descriptor *tx = NULL;
+ struct dma_async_tx_descriptor *tx;
dma_addr_t addr;
dma_cookie_t cookie;
int err = 0;
err_dma_pool:
kfree(device);
err_kzalloc:
- dev_err(&device->pdev->dev,
+ dev_err(&pdev->dev,
"Intel(R) I/OAT DMA Engine initialization failed\n");
return NULL;
}
dma_cookie_t completed_cookie;
unsigned long last_completion;
- u32 xfercap; /* XFERCAP register value expanded out */
+ size_t xfercap; /* XFERCAP register value expanded out */
spinlock_t cleanup_lock;
spinlock_t desc_lock;
DAVINCI_I2C_STR_REG,
w);
} else
- dev_err(dev->dev, "RDR IRQ while no"
+ dev_err(dev->dev, "RDR IRQ while no "
"data requested\n");
break;
DAVINCI_I2C_IMR_REG,
w);
} else
- dev_err(dev->dev, "TDR IRQ while no data to"
+ dev_err(dev->dev, "TDR IRQ while no data to "
"send\n");
break;
adap->owner = THIS_MODULE;
snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
adap->algo_data = bit_data;
+ adap->class = I2C_CLASS_HWMON;
adap->dev.parent = &pdev->dev;
/*
while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
OMAP_I2C_SYSS_RDONE)) {
if (time_after(jiffies, timeout)) {
- dev_warn(dev->dev, "timeout waiting"
+ dev_warn(dev->dev, "timeout waiting "
"for controller reset\n");
return -ETIMEDOUT;
}
dev->buf_len--;
}
} else
- dev_err(dev->dev, "RRDY IRQ while no data"
+ dev_err(dev->dev, "RRDY IRQ while no data "
"requested\n");
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
continue;
dev->buf_len--;
}
} else
- dev_err(dev->dev, "XRDY IRQ while no"
+ dev_err(dev->dev, "XRDY IRQ while no "
"data to send\n");
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/i2c.h>
# TODO: split it on per host driver config options (or module parameters)
config BLK_DEV_OFFBOARD
- bool "Boot off-board chipsets first support"
+ bool "Boot off-board chipsets first support (DEPRECATED)"
depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
help
Normally, IDE controllers built into the motherboard (on-board
Note that, if you do this, the order of the hd* devices will be
rearranged which may require modification of fstab and other files.
+ Please also note that this method of assuring stable naming of
+ IDE devices is unreliable and use other means for achieving it
+ (i.e. udev).
+
If in doubt, say N.
config BLK_DEV_GENERIC
return 1;
}
-static void post_transform_command(struct request *req)
-{
- u8 *c = req->cmd;
- char *ibuf;
-
- if (!blk_pc_request(req))
- return;
-
- if (req->bio)
- ibuf = bio_data(req->bio);
- else
- ibuf = req->data;
-
- if (!ibuf)
- return;
-
- /*
- * set ansi-revision and response data as atapi
- */
- if (c[0] == GPCMD_INQUIRY) {
- ibuf[2] |= 2;
- ibuf[3] = (ibuf[3] & 0xf0) | 2;
- }
-}
-
typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
/*
return ide_started;
end_request:
- if (!rq->data_len)
- post_transform_command(rq);
-
spin_lock_irqsave(&ide_lock, flags);
blkdev_dequeue_request(rq);
end_that_request_last(rq, 1);
else
printk(" drive");
- printk(", %dkB Cache", be16_to_cpu(cap.buffer_size));
-
- if (drive->using_dma)
- ide_dma_verbose(drive);
-
- printk("\n");
+ printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size));
return nslots;
}
* and Andre Hedrick <andre@linux-ide.org>
*
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
- *
- * Version 1.00 move disk only code from ide.c to ide-disk.c
- * support optional byte-swapping of all data
- * Version 1.01 fix previous byte-swapping code
- * Version 1.02 remove ", LBA" from drive identification msgs
- * Version 1.03 fix display of id->buf_size for big-endian
- * Version 1.04 add /proc configurable settings and S.M.A.R.T support
- * Version 1.05 add capacity support for ATA3 >= 8GB
- * Version 1.06 get boot-up messages to show full cyl count
- * Version 1.07 disable door-locking if it fails
- * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB,
- * process of adding new ATA4 compliance.
- * fixed problems in allowing fdisk to see
- * the entire disk.
- * Version 1.09 added increment of rq->sector in ide_multwrite
- * added UDMA 3/4 reporting
- * Version 1.10 request queue changes, Ultra DMA 100
- * Version 1.11 added 48-bit lba
- * Version 1.12 adding taskfile io access method
- * Version 1.13 added standby and flush-cache for notifier
- * Version 1.14 added acoustic-wcache
- * Version 1.15 convert all calls to ide_raw_taskfile
- * since args will return register content.
- * Version 1.16 added suspend-resume-checkpower
- * Version 1.17 do flush on standby, do flush on ATA < ATA6
- * fix wcache setup.
*/
#define IDEDISK_VERSION "1.18"
if (id->buf_size)
printk (" w/%dKiB Cache", id->buf_size/2);
- printk(", CHS=%d/%d/%d",
- drive->bios_cyl, drive->bios_head, drive->bios_sect);
- if (drive->using_dma)
- ide_dma_verbose(drive);
- printk("\n");
+ printk(KERN_CONT ", CHS=%d/%d/%d\n",
+ drive->bios_cyl, drive->bios_head, drive->bios_sect);
/* write cache enabled? */
if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = hwif->INB(hwif->dma_status);
-#if 0 /* do not set unless you know what you are doing */
- if (dma_stat & 4) {
- u8 stat = hwif->INB(IDE_STATUS_REG);
- hwif->OUTB(hwif->dma_status, dma_stat & 0xE4);
- }
-#endif
/* return 1 if INTR asserted */
if ((dma_stat & 4) == 4)
return 1;
mode = XFER_MW_DMA_1;
}
- printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+ mode = min(mode, req_mode);
+
+ printk(KERN_INFO "%s: %s mode selected\n", drive->name,
mode ? ide_xfer_verbose(mode) : "no DMA");
- return min(mode, req_mode);
+ return mode;
}
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
if (__ide_dma_bad_drive(drive))
return 0;
+ if (ide_id_dma_bug(drive))
+ return 0;
+
if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
return vdma ? 0 : -1;
}
-void ide_dma_verbose(ide_drive_t *drive)
+int ide_id_dma_bug(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
if (id->field_valid & 4) {
if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
- goto bug_dma_off;
- if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) {
- if (((id->dma_ultra >> 11) & 0x1F) &&
- eighty_ninty_three(drive)) {
- if ((id->dma_ultra >> 15) & 1) {
- printk(", UDMA(mode 7)");
- } else if ((id->dma_ultra >> 14) & 1) {
- printk(", UDMA(133)");
- } else if ((id->dma_ultra >> 13) & 1) {
- printk(", UDMA(100)");
- } else if ((id->dma_ultra >> 12) & 1) {
- printk(", UDMA(66)");
- } else if ((id->dma_ultra >> 11) & 1) {
- printk(", UDMA(44)");
- } else
- goto mode_two;
- } else {
- mode_two:
- if ((id->dma_ultra >> 10) & 1) {
- printk(", UDMA(33)");
- } else if ((id->dma_ultra >> 9) & 1) {
- printk(", UDMA(25)");
- } else if ((id->dma_ultra >> 8) & 1) {
- printk(", UDMA(16)");
- }
- }
- } else {
- printk(", (U)DMA"); /* Can be BIOS-enabled! */
- }
+ goto err_out;
} else if (id->field_valid & 2) {
if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
- goto bug_dma_off;
- printk(", DMA");
- } else if (id->field_valid & 1) {
- goto bug_dma_off;
+ goto err_out;
}
- return;
-bug_dma_off:
- printk(", BUG DMA OFF");
- hwif->dma_off_quietly(drive);
- return;
+ return 0;
+err_out:
+ printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
+ return 1;
}
-EXPORT_SYMBOL(ide_dma_verbose);
-
int ide_set_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
if (rc)
printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
SELECT_DRIVE(drive);
- HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
+ if (IDE_CONTROL_REG)
+ HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
rc = ide_wait_not_busy(HWIF(drive), 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
drive->id->dma_1word = id->dma_1word;
/* anything more ? */
kfree(id);
+
+ if (drive->using_dma && ide_id_dma_bug(drive))
+ ide_dma_off(drive);
}
return 1;
* Add common non I/O op stuff here. Make sure it has proper
* kernel-doc function headers or your patch will be rejected
*/
-
+
+static const char *udma_str[] =
+ { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
+ "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
+static const char *mwdma_str[] =
+ { "MWDMA0", "MWDMA1", "MWDMA2" };
+static const char *swdma_str[] =
+ { "SWDMA0", "SWDMA1", "SWDMA2" };
+static const char *pio_str[] =
+ { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
/**
* ide_xfer_verbose - return IDE mode names
- * @xfer_rate: rate to name
+ * @mode: transfer mode
*
* Returns a constant string giving the name of the mode
* requested.
*/
-char *ide_xfer_verbose (u8 xfer_rate)
+const char *ide_xfer_verbose(u8 mode)
{
- switch(xfer_rate) {
- case XFER_UDMA_7: return("UDMA 7");
- case XFER_UDMA_6: return("UDMA 6");
- case XFER_UDMA_5: return("UDMA 5");
- case XFER_UDMA_4: return("UDMA 4");
- case XFER_UDMA_3: return("UDMA 3");
- case XFER_UDMA_2: return("UDMA 2");
- case XFER_UDMA_1: return("UDMA 1");
- case XFER_UDMA_0: return("UDMA 0");
- case XFER_MW_DMA_2: return("MW DMA 2");
- case XFER_MW_DMA_1: return("MW DMA 1");
- case XFER_MW_DMA_0: return("MW DMA 0");
- case XFER_SW_DMA_2: return("SW DMA 2");
- case XFER_SW_DMA_1: return("SW DMA 1");
- case XFER_SW_DMA_0: return("SW DMA 0");
- case XFER_PIO_4: return("PIO 4");
- case XFER_PIO_3: return("PIO 3");
- case XFER_PIO_2: return("PIO 2");
- case XFER_PIO_1: return("PIO 1");
- case XFER_PIO_0: return("PIO 0");
- case XFER_PIO_SLOW: return("PIO SLOW");
- default: return("XFER ERROR");
- }
+ const char *s;
+ u8 i = mode & 0xf;
+
+ if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
+ s = udma_str[i];
+ else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
+ s = mwdma_str[i];
+ else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
+ s = swdma_str[i];
+ else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
+ s = pio_str[i & 0x7];
+ else if (mode == XFER_PIO_SLOW)
+ s = "PIO SLOW";
+ else
+ s = "XFER ERROR";
+
+ return s;
}
EXPORT_SYMBOL(ide_xfer_verbose);
*
* This is the IDE probe module, as evolved from hd.c and ide.c.
*
- * Version 1.00 move drive probing code from ide.c to ide-probe.c
- * Version 1.01 fix compilation problem for m68k
- * Version 1.02 increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
- * by Andrea Arcangeli
- * Version 1.03 fix for (hwif->chipset == ide_4drives)
- * Version 1.04 fixed buggy treatments of known flash memory cards
- *
- * Version 1.05 fix for (hwif->chipset == ide_pdc4030)
- * added ide6/7/8/9
- * allowed for secondary flash card to be detectable
- * with new flag : drive->ata_flash : 1;
- * Version 1.06 stream line request queue and prep for cascade project.
- * Version 1.07 max_sect <= 255; slower disks would get behind and
- * then fall over when they get to 256. Paul G.
- * Version 1.10 Update set for new IDE. drive->id is now always
- * valid after probe time even with noprobe
+ * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
+ * by Andrea Arcangeli
*/
#include <linux/module.h>
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ if (IDE_CONTROL_REG)
+ hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
return -EINVAL;
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+
drive->io_32bit = arg;
#ifdef CONFIG_BLK_DEV_DTC2278
if (HWIF(drive)->chipset == ide_dtc2278)
HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
#endif /* CONFIG_BLK_DEV_DTC2278 */
+
+ spin_unlock_irq(&ide_lock);
+
return 0;
}
return sprintf(buf, "ide:m-%s\n", media_string(drive));
}
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->model);
+}
+
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->fw_rev);
+}
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->serial_no);
+}
+
static struct device_attribute ide_dev_attrs[] = {
__ATTR_RO(media),
__ATTR_RO(drivename),
__ATTR_RO(modalias),
+ __ATTR_RO(model),
+ __ATTR_RO(firmware),
+ __ATTR(serial, 0400, serial_show, NULL),
__ATTR_NULL
};
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
/* XFER_PIO_0 */ 0xc0d08585
};
+#if 0
+/* These are the timing tables from the HighPoint open source drivers... */
static u32 thirty_three_base_hpt37x[] = {
/* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
/* XFER_UDMA_5 */ 0x12446231,
/* XFER_PIO_1 */ 0x0d029d26,
/* XFER_PIO_0 */ 0x0d029d5e
};
+#else
+/*
+ * The following are the new timing tables with PIO mode data/taskfile transfer
+ * overclocking fixed...
+ */
+
+/* This table is taken from the HPT370 data manual rev. 1.02 */
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
+ /* XFER_UDMA_5 */ 0x16455031,
+ /* XFER_UDMA_4 */ 0x16455031,
+ /* XFER_UDMA_3 */ 0x166d5031,
+ /* XFER_UDMA_2 */ 0x16495031,
+ /* XFER_UDMA_1 */ 0x164d5033,
+ /* XFER_UDMA_0 */ 0x16515097,
+
+ /* XFER_MW_DMA_2 */ 0x26515031,
+ /* XFER_MW_DMA_1 */ 0x26515033,
+ /* XFER_MW_DMA_0 */ 0x26515097,
+
+ /* XFER_PIO_4 */ 0x06515021,
+ /* XFER_PIO_3 */ 0x06515022,
+ /* XFER_PIO_2 */ 0x06515033,
+ /* XFER_PIO_1 */ 0x06915065,
+ /* XFER_PIO_0 */ 0x06d1508a
+};
+
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1a861842,
+ /* XFER_UDMA_5 */ 0x1a861842,
+ /* XFER_UDMA_4 */ 0x1aae1842,
+ /* XFER_UDMA_3 */ 0x1a8e1842,
+ /* XFER_UDMA_2 */ 0x1a0e1842,
+ /* XFER_UDMA_1 */ 0x1a161854,
+ /* XFER_UDMA_0 */ 0x1a1a18ea,
+
+ /* XFER_MW_DMA_2 */ 0x2a821842,
+ /* XFER_MW_DMA_1 */ 0x2a821854,
+ /* XFER_MW_DMA_0 */ 0x2a8218ea,
+
+ /* XFER_PIO_4 */ 0x0a821842,
+ /* XFER_PIO_3 */ 0x0a821843,
+ /* XFER_PIO_2 */ 0x0a821855,
+ /* XFER_PIO_1 */ 0x0ac218a8,
+ /* XFER_PIO_0 */ 0x0b02190c
+};
+
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c86fe62,
+ /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
+ /* XFER_UDMA_4 */ 0x1c8afe62,
+ /* XFER_UDMA_3 */ 0x1c8efe62,
+ /* XFER_UDMA_2 */ 0x1c92fe62,
+ /* XFER_UDMA_1 */ 0x1c9afe62,
+ /* XFER_UDMA_0 */ 0x1c82fe62,
+
+ /* XFER_MW_DMA_2 */ 0x2c82fe62,
+ /* XFER_MW_DMA_1 */ 0x2c82fe66,
+ /* XFER_MW_DMA_0 */ 0x2c82ff2e,
+
+ /* XFER_PIO_4 */ 0x0c82fe62,
+ /* XFER_PIO_3 */ 0x0c82fe84,
+ /* XFER_PIO_2 */ 0x0c82fea6,
+ /* XFER_PIO_1 */ 0x0d02ff26,
+ /* XFER_PIO_0 */ 0x0d42ff7f
+};
+#endif
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
{
struct pci_dev *dev2;
- dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2,
+ dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1,
PCI_FUNC(dev->devfn)));
+
if (dev2 &&
dev2->vendor == dev->vendor &&
dev2->device == dev->device) {
/*
* Module interfaces
*/
-
+
static int pre_init = 1; /* Before first ordered IDE scan */
static LIST_HEAD(ide_pci_drivers);
* @module: owner module of the driver
*
* Registers a driver with the IDE layer. The IDE layer arranges that
- * boot time setup is done in the expected device order and then
+ * boot time setup is done in the expected device order and then
* hands the controllers off to the core PCI code to do the rest of
* the work.
*
int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
const char *mod_name)
{
- if(!pre_init)
+ if (!pre_init)
return __pci_register_driver(driver, module, mod_name);
driver->driver.owner = module;
list_add_tail(&driver->node, &ide_pci_drivers);
return 0;
}
-
EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
/**
* This is only used during boot up to get the ordering correct. After
* boot up the pci layer takes over the job.
*/
-
+
static int __init ide_scan_pcidev(struct pci_dev *dev)
{
struct list_head *l;
struct pci_driver *d;
-
+
list_for_each(l, &ide_pci_drivers) {
d = list_entry(l, struct pci_driver, node);
if (d->id_table) {
- const struct pci_device_id *id = pci_match_id(d->id_table,
- dev);
+ const struct pci_device_id *id =
+ pci_match_id(d->id_table, dev);
+
if (id != NULL && d->probe(dev, id) >= 0) {
dev->driver = d;
pci_dev_get(dev);
pre_init = 0;
if (!scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
ide_scan_pcidev(dev);
else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev))
- != NULL)
+ while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
+ dev)))
ide_scan_pcidev(dev);
-
+
/*
* Hand the drivers over to the PCI layer now we
* are post init.
list_for_each_safe(l, n, &ide_pci_drivers) {
list_del(l);
d = list_entry(l, struct pci_driver, node);
- if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name))
- printk(KERN_ERR "%s: failed to register driver for %s\n",
- __FUNCTION__, d->driver.mod_name);
+ if (__pci_register_driver(d, d->driver.owner,
+ d->driver.mod_name))
+ printk(KERN_ERR "%s: failed to register %s driver\n",
+ __FUNCTION__, d->driver.mod_name);
}
}
#endif
extern int ehca_port_act_time;
extern int ehca_use_hp_mr;
extern int ehca_scaling_code;
+extern int ehca_lock_hcalls;
struct ipzu_queue_resp {
u32 qe_size; /* queue entry size */
#ifdef CONFIG_PPC_64K_PAGES
#include <linux/slab.h>
#endif
+
#include "ehca_classes.h"
#include "ehca_iverbs.h"
#include "ehca_mrmw.h"
#include "ehca_tools.h"
#include "hcp_if.h"
-#define HCAD_VERSION "0024"
+#define HCAD_VERSION "0025"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
int ehca_static_rate = -1;
int ehca_scaling_code = 0;
int ehca_mr_largepage = 1;
+int ehca_lock_hcalls = -1;
module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO);
module_param_named(debug_level, ehca_debug_level, int, S_IRUGO);
module_param_named(static_rate, ehca_static_rate, int, S_IRUGO);
module_param_named(scaling_code, ehca_scaling_code, int, S_IRUGO);
module_param_named(mr_largepage, ehca_mr_largepage, int, S_IRUGO);
+module_param_named(lock_hcalls, ehca_lock_hcalls, bool, S_IRUGO);
MODULE_PARM_DESC(open_aqp1,
"AQP1 on startup (0: no (default), 1: yes)");
MODULE_PARM_DESC(mr_largepage,
"use large page for MR (0: use PAGE_SIZE (default), "
"1: use large page depending on MR size");
+MODULE_PARM_DESC(lock_hcalls,
+ "serialize all hCalls made by the driver "
+ "(default: autodetect)");
DEFINE_RWLOCK(ehca_qp_idr_lock);
DEFINE_RWLOCK(ehca_cq_idr_lock);
{ HCA_CAP_UD_LL_QP, "HCA_CAP_UD_LL_QP" },
{ HCA_CAP_RESIZE_MR, "HCA_CAP_RESIZE_MR" },
{ HCA_CAP_MINI_QP, "HCA_CAP_MINI_QP" },
+ { HCA_CAP_H_ALLOC_RES_SYNC, "HCA_CAP_H_ALLOC_RES_SYNC" },
};
static int ehca_sense_attributes(struct ehca_shca *shca)
if (EHCA_BMASK_GET(hca_cap_descr[i].mask, shca->hca_cap))
ehca_gen_dbg(" %s", hca_cap_descr[i].descr);
+ /* Autodetect hCall locking -- the "H_ALLOC_RESOURCE synced" flag is
+ * a firmware property, so it's valid across all adapters
+ */
+ if (ehca_lock_hcalls == -1)
+ ehca_lock_hcalls = !(shca->hca_cap & HCA_CAP_H_ALLOC_RES_SYNC);
+
/* translate supported MR page sizes; always support 4K */
shca->hca_cap_mr_pgsize = EHCA_PAGESIZE;
if (ehca_mr_largepage) { /* support extra sizes only if enabled */
/* copy back return values */
srq_init_attr->attr.max_wr = qp_init_attr.cap.max_recv_wr;
- srq_init_attr->attr.max_sge = qp_init_attr.cap.max_recv_sge;
+ srq_init_attr->attr.max_sge = 3;
/* drive SRQ into RTR state */
mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
}
srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1;
- srq_attr->max_sge = qpcb->actual_nr_sges_in_rq_wqe;
+ srq_attr->max_sge = 3;
srq_attr->srq_limit = EHCA_BMASK_GET(
MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit);
unsigned long arg7)
{
long ret;
- int i, sleep_msecs, do_lock;
- unsigned long flags;
+ int i, sleep_msecs;
+ unsigned long flags = 0;
ehca_gen_dbg("opcode=%lx " HCALL7_REGS_FORMAT,
opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
- /* lock H_FREE_RESOURCE(MR) against itself and H_ALLOC_RESOURCE(MR) */
- if ((opcode == H_FREE_RESOURCE) && (arg7 == 5)) {
- arg7 = 0; /* better not upset firmware */
- do_lock = 1;
- }
-
for (i = 0; i < 5; i++) {
- if (do_lock)
+ /* serialize hCalls to work around firmware issue */
+ if (ehca_lock_hcalls)
spin_lock_irqsave(&hcall_lock, flags);
ret = plpar_hcall_norets(opcode, arg1, arg2, arg3, arg4,
arg5, arg6, arg7);
- if (do_lock)
+ if (ehca_lock_hcalls)
spin_unlock_irqrestore(&hcall_lock, flags);
if (H_IS_LONG_BUSY(ret)) {
unsigned long arg9)
{
long ret;
- int i, sleep_msecs, do_lock;
+ int i, sleep_msecs;
unsigned long flags = 0;
ehca_gen_dbg("INPUT -- opcode=%lx " HCALL9_REGS_FORMAT, opcode,
arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9);
- /* lock H_ALLOC_RESOURCE(MR) against itself and H_FREE_RESOURCE(MR) */
- do_lock = ((opcode == H_ALLOC_RESOURCE) && (arg2 == 5));
-
for (i = 0; i < 5; i++) {
- if (do_lock)
+ /* serialize hCalls to work around firmware issue */
+ if (ehca_lock_hcalls)
spin_lock_irqsave(&hcall_lock, flags);
ret = plpar_hcall9(opcode, outs,
arg1, arg2, arg3, arg4, arg5,
arg6, arg7, arg8, arg9);
- if (do_lock)
+ if (ehca_lock_hcalls)
spin_unlock_irqrestore(&hcall_lock, flags);
if (H_IS_LONG_BUSY(ret)) {
return ehca_plpar_hcall_norets(H_FREE_RESOURCE,
adapter_handle.handle, /* r4 */
mr->ipz_mr_handle.handle, /* r5 */
- 0, 0, 0, 0, 5);
+ 0, 0, 0, 0, 0);
}
u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle,
#define HCA_CAP_UD_LL_QP EHCA_BMASK_IBM(16, 16)
#define HCA_CAP_RESIZE_MR EHCA_BMASK_IBM(17, 17)
#define HCA_CAP_MINI_QP EHCA_BMASK_IBM(18, 18)
+#define HCA_CAP_H_ALLOC_RES_SYNC EHCA_BMASK_IBM(19, 19)
/* query port response block */
struct hipz_query_port {
ret = pmac_suspend_devices();
if (ret) {
pbook_free_pci_save();
+ iounmap(mem_ctrl);
printk(KERN_ERR "Sleep rejected by devices\n");
return ret;
}
config DM_MULTIPATH_HP
tristate "HP MSA multipath support (EXPERIMENTAL)"
- depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
+ depends on DM_MULTIPATH && BLK_DEV_DM && SCSI && EXPERIMENTAL
---help---
Multipath support for HP MSA (Active/Passive) series hardware.
struct bio *clone;
unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM;
- unsigned int i;
+ unsigned i, len;
+ struct page *page;
clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, cc->bs);
if (!clone)
clone_init(io, clone);
for (i = 0; i < nr_iovecs; i++) {
- struct bio_vec *bv = bio_iovec_idx(clone, i);
-
- bv->bv_page = mempool_alloc(cc->page_pool, gfp_mask);
- if (!bv->bv_page)
+ page = mempool_alloc(cc->page_pool, gfp_mask);
+ if (!page)
break;
/*
if (i == (MIN_BIO_PAGES - 1))
gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT;
- bv->bv_offset = 0;
- if (size > PAGE_SIZE)
- bv->bv_len = PAGE_SIZE;
- else
- bv->bv_len = size;
+ len = (size > PAGE_SIZE) ? PAGE_SIZE : size;
+
+ if (!bio_add_page(clone, page, len, 0)) {
+ mempool_free(page, cc->page_pool);
+ break;
+ }
- clone->bi_size += bv->bv_len;
- clone->bi_vcnt++;
- size -= bv->bv_len;
+ size -= len;
}
if (!clone->bi_size) {
struct crypt_config *cc = io->target->private;
unsigned read_io = bio_data_dir(clone) == READ;
+ if (unlikely(!bio_flagged(clone, BIO_UPTODATE) && !error))
+ error = -EIO;
+
/*
* free the processed pages
*/
goto out;
}
- if (unlikely(!bio_flagged(clone, BIO_UPTODATE))) {
- error = -EIO;
+ if (unlikely(error))
goto out;
- }
bio_put(clone);
kcryptd_queue_crypt(io);
dm_table_put(table);
}
+ dm_kobject_uevent(hc->md);
+
dm_put(hc->md);
up_write(&_hash_lock);
kfree(old_name);
if (!table)
goto out_argv;
- if (tmsg->sector >= dm_table_get_size(table)) {
+ ti = dm_table_find_target(table, tmsg->sector);
+ if (!dm_target_is_valid(ti)) {
DMWARN("Target message sector outside device.");
r = -EINVAL;
- goto out_table;
- }
-
- ti = dm_table_find_target(table, tmsg->sector);
- if (ti->type->message)
+ } else if (ti->type->message)
r = ti->type->message(ti, argc, argv);
else {
DMWARN("Target type does not support messages");
r = -EINVAL;
}
- out_table:
dm_table_put(table);
out_argv:
kfree(argv);
lhs->max_segment_size =
min_not_zero(lhs->max_segment_size, rhs->max_segment_size);
+ lhs->max_hw_sectors =
+ min_not_zero(lhs->max_hw_sectors, rhs->max_hw_sectors);
+
lhs->seg_boundary_mask =
min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask);
/*
* Allocate both the target array and offset array at once.
+ * Append an empty entry to catch sectors beyond the end of
+ * the device.
*/
- n_highs = (sector_t *) dm_vcalloc(num, sizeof(struct dm_target) +
+ n_highs = (sector_t *) dm_vcalloc(num + 1, sizeof(struct dm_target) +
sizeof(sector_t));
if (!n_highs)
return -ENOMEM;
rs->max_segment_size =
min_not_zero(rs->max_segment_size, q->max_segment_size);
+ rs->max_hw_sectors =
+ min_not_zero(rs->max_hw_sectors, q->max_hw_sectors);
+
rs->seg_boundary_mask =
min_not_zero(rs->seg_boundary_mask,
q->seg_boundary_mask);
{
if (!rs->max_sectors)
rs->max_sectors = SAFE_MAX_SECTORS;
+ if (!rs->max_hw_sectors)
+ rs->max_hw_sectors = SAFE_MAX_SECTORS;
if (!rs->max_phys_segments)
rs->max_phys_segments = MAX_PHYS_SEGMENTS;
if (!rs->max_hw_segments)
/*
* Search the btree for the correct target.
+ *
+ * Caller should check returned pointer with dm_target_is_valid()
+ * to trap I/O beyond end of device.
*/
struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector)
{
q->max_hw_segments = t->limits.max_hw_segments;
q->hardsect_size = t->limits.hardsect_size;
q->max_segment_size = t->limits.max_segment_size;
+ q->max_hw_sectors = t->limits.max_hw_sectors;
q->seg_boundary_mask = t->limits.seg_boundary_mask;
q->bounce_pfn = t->limits.bounce_pfn;
if (t->limits.no_cluster)
return clone;
}
-static void __clone_and_map(struct clone_info *ci)
+static int __clone_and_map(struct clone_info *ci)
{
struct bio *clone, *bio = ci->bio;
- struct dm_target *ti = dm_table_find_target(ci->map, ci->sector);
- sector_t len = 0, max = max_io_len(ci->md, ci->sector, ti);
+ struct dm_target *ti;
+ sector_t len = 0, max;
struct dm_target_io *tio;
+ ti = dm_table_find_target(ci->map, ci->sector);
+ if (!dm_target_is_valid(ti))
+ return -EIO;
+
+ max = max_io_len(ci->md, ci->sector, ti);
+
/*
* Allocate a target io object.
*/
do {
if (offset) {
ti = dm_table_find_target(ci->map, ci->sector);
+ if (!dm_target_is_valid(ti))
+ return -EIO;
+
max = max_io_len(ci->md, ci->sector, ti);
tio = alloc_tio(ci->md);
ci->idx++;
}
+
+ return 0;
}
/*
static int __split_bio(struct mapped_device *md, struct bio *bio)
{
struct clone_info ci;
+ int error = 0;
ci.map = dm_get_table(md);
if (unlikely(!ci.map))
ci.idx = bio->bi_idx;
start_io_acct(ci.io);
- while (ci.sector_count)
- __clone_and_map(&ci);
+ while (ci.sector_count && !error)
+ error = __clone_and_map(&ci);
/* drop the extra reference count */
- dec_pending(ci.io, 0);
+ dec_pending(ci.io, error);
dm_table_put(ci.map);
return 0;
dm_table_unplug_all(map);
- kobject_uevent(&md->disk->kobj, KOBJ_CHANGE);
+ dm_kobject_uevent(md);
r = 0;
/*-----------------------------------------------------------------
* Event notification.
*---------------------------------------------------------------*/
+void dm_kobject_uevent(struct mapped_device *md)
+{
+ kobject_uevent(&md->disk->kobj, KOBJ_CHANGE);
+}
+
uint32_t dm_next_uevent_seq(struct mapped_device *md)
{
return atomic_add_return(1, &md->uevent_seq);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
void dm_table_unplug_all(struct dm_table *t);
+/*
+ * To check the return value from dm_table_find_target().
+ */
+#define dm_target_is_valid(t) ((t)->table)
+
/*-----------------------------------------------------------------
* A registry of target types.
*---------------------------------------------------------------*/
int dm_open_count(struct mapped_device *md);
int dm_lock_for_deletion(struct mapped_device *md);
+void dm_kobject_uevent(struct mapped_device *md);
+
#endif
#
obj-y := common/
-obj-$(CONFIG_VIDEO_DEV) += video/
+obj-y += video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
DEB_D(("VIDIOCGMBUF \n"));
q = &fh->video_q;
- mutex_lock(&q->lock);
err = videobuf_mmap_setup(q,gbuffers,gbufsize,
V4L2_MEMORY_MMAP);
- if (err < 0) {
- mutex_unlock(&q->lock);
+ if (err < 0)
return err;
- }
gbuffers = err;
memset(mbuf,0,sizeof(*mbuf));
mbuf->size = gbuffers * gbufsize;
for (i = 0; i < gbuffers; i++)
mbuf->offsets[i] = i * gbufsize;
- mutex_unlock(&q->lock);
return 0;
}
#endif
err = saa7146_stop_preview(fh);
}
- // release all capture buffers
- mutex_lock(&q->lock);
- videobuf_read_stop(q);
- mutex_unlock(&q->lock);
+ videobuf_stop(q);
/* hmm, why is this function declared void? */
/* return err */
obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+# due to tuner-xc3028
+EXTRA_CFLAGS += -Idrivers/media/video
+
.agc2_slope2 = 0x1e,
};
+#if defined(CONFIG_DVB_DIB3000MC) || \
+ (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
+
static struct dib3000mc_config mod3000p_dib3000p_config = {
&dib3000p_panasonic_agc_config,
return 0;
}
EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
+#endif
/*
* common remote control stuff
u16 val;
u16 data;
} vsb_snr_tab[] = {
- { 1023, 770, },
+ { 924, 300, },
{ 923, 300, },
{ 918, 295, },
{ 915, 290, },
u16 val;
u16 data;
} qam64_snr_tab[] = {
+ { 1, 0, },
{ 12, 300, },
{ 15, 290, },
{ 18, 280, },
{ 95, 202, },
{ 96, 201, },
{ 104, 200, },
+ { 255, 0, },
};
/* QAM256 SNR lookup table */
u16 val;
u16 data;
} qam256_snr_tab[] = {
+ { 1, 0, },
{ 12, 400, },
{ 13, 390, },
{ 15, 380, },
{ 105, 262, },
{ 106, 261, },
{ 110, 260, },
+ { 255, 0, },
};
/* 8 bit registers, 16 bit values */
u16 reg;
dprintk("%s()\n", __FUNCTION__);
- reg = s5h1409_readreg(state, 0xf1) & 0x1ff;
-
switch(state->current_modulation) {
case QAM_64:
+ reg = s5h1409_readreg(state, 0xf0) & 0xff;
return s5h1409_qam64_lookup_snr(fe, snr, reg);
case QAM_256:
+ reg = s5h1409_readreg(state, 0xf0) & 0xff;
return s5h1409_qam256_lookup_snr(fe, snr, reg);
case VSB_8:
+ reg = s5h1409_readreg(state, 0xf1) & 0x3ff;
return s5h1409_vsb_lookup_snr(fe, snr, reg);
default:
break;
tda10086_write_byte(state, 0x3d, 0x80);
// setup SEC
- tda10086_write_byte(state, 0x36, 0x00); // all SEC off
+ tda10086_write_byte(state, 0x36, 0x80); // all SEC off, no 22k tone
tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency
tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // }
dprintk ("%s\n", __FUNCTION__);
- switch(tone) {
+ switch (tone) {
case SEC_TONE_OFF:
- tda10086_write_byte(state, 0x36, 0x00);
+ tda10086_write_byte(state, 0x36, 0x80);
break;
case SEC_TONE_ON:
- tda10086_write_byte(state, 0x36, 0x01);
+ tda10086_write_byte(state, 0x36, 0x81);
break;
}
for(i=0; i< cmd->msg_len; i++) {
tda10086_write_byte(state, 0x48+i, cmd->msg[i]);
}
- tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len - 1) << 4));
+ tda10086_write_byte(state, 0x36, 0x88 | ((cmd->msg_len - 1) << 4));
tda10086_diseqc_wait(state);
switch(minicmd) {
case SEC_MINI_A:
- tda10086_write_byte(state, 0x36, 0x04);
+ tda10086_write_byte(state, 0x36, 0x84);
break;
case SEC_MINI_B:
- tda10086_write_byte(state, 0x36, 0x06);
+ tda10086_write_byte(state, 0x36, 0x86);
break;
}
enum fe_bandwidth bandwidth,
u16 *nominal_rate)
{
- u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */
+ u32 adc_clock = 45056; /* 45.056 MHz */
u8 bw;
struct zl10353_state *state = fe->demodulator_priv;
break;
}
- *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4;
+ *nominal_rate = (bw * (1 << 23) / 7 * 125 + adc_clock / 2) / adc_clock;
dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
__FUNCTION__, bw, adc_clock, *nominal_rate);
u8 demod_address;
/* frequencies in kHz */
- int adc_clock; // default: 22528
+ int adc_clock; /* default: 45056 */
/* set if no pll is connected to the secondary i2c bus */
int no_tuner;
.addr = 0,
.adapter = NULL,
.driver = &i2c_driver_bt866,
- .usage_count = 0
};
static int bt866_found_proc(struct i2c_adapter *adapter,
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
-void __devinit bttv_check_chipset(void)
+void __init bttv_check_chipset(void)
{
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
/* stop vbi capture */
if (check_btres(fh, RESOURCE_VBI)) {
- if (fh->vbi.streaming)
- videobuf_streamoff(&fh->vbi);
- if (fh->vbi.reading)
- videobuf_read_stop(&fh->vbi);
+ videobuf_stop(&fh->vbi);
free_btres(btv,fh,RESOURCE_VBI);
}
#endif
};
-static int bttv_init_module(void)
+static int __init bttv_init_module(void)
{
int ret;
return pci_register_driver(&bttv_pci_driver);
}
-static void bttv_cleanup_module(void)
+static void __exit bttv_cleanup_module(void)
{
pci_unregister_driver(&bttv_pci_driver);
bus_unregister(&bttv_sub_bus_type);
cx8802_cancel_buffers(fh->dev);
/* stop mpeg capture */
- if (fh->mpegq.streaming)
- videobuf_streamoff(&fh->mpegq);
- if (fh->mpegq.reading)
- videobuf_read_stop(&fh->mpegq);
+ videobuf_stop(&fh->mpegq);
videobuf_mmap_free(&fh->mpegq);
file->private_data = NULL;
/* stop vbi capture */
if (res_check(fh, RESOURCE_VBI)) {
- if (fh->vbiq.streaming)
- videobuf_streamoff(&fh->vbiq);
- if (fh->vbiq.reading)
- videobuf_read_stop(&fh->vbiq);
+ videobuf_stop(&fh->vbiq);
res_free(dev,fh,RESOURCE_VBI);
}
{
/* Sets I2C speed to 100 KHz */
- em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+ if (!dev->is_em2800)
+ em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
/* enable vbi capturing */
{
/* NOTE: buffers are not freed here */
struct em28xx_frame_t *f = vma->vm_private_data;
- f->vma_use_count--;
+
+ if (f->vma_use_count)
+ f->vma_use_count--;
}
static struct vm_operations_struct em28xx_vm_ops = {
}
/* init + register i2c algo-bit adapter */
-int __devinit init_ivtv_i2c(struct ivtv *itv)
+int init_ivtv_i2c(struct ivtv *itv)
{
IVTV_DEBUG_I2C("i2c init\n");
void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg);
/* init + register i2c algo-bit adapter */
-int __devinit init_ivtv_i2c(struct ivtv *itv);
+int init_ivtv_i2c(struct ivtv *itv);
void exit_ivtv_i2c(struct ivtv *itv);
#endif
int minor_offset;
int dma, pio;
enum v4l2_buf_type buf_type;
- struct file_operations *fops;
+ const struct file_operations *fops;
} ivtv_stream_info[] = {
{ /* IVTV_ENC_STREAM_TYPE_MPG */
"encoder MPG",
{
unsigned char buf[64];
int v;
- int ct=0;
+ int ct = 0;
va_list argp;
- va_start(argp,t);
+ va_start(argp, t);
- while((v=va_arg(argp,int))!=-1)
- buf[ct++]=v;
+ while ((v = va_arg(argp, int)) != -1)
+ buf[ct++] = v;
+
+ va_end(argp);
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
{
unsigned char buf[64];
int v;
- int ct=0;
+ int ct = 0;
va_list argp;
va_start(argp,t);
- while((v=va_arg(argp,int))!=-1)
- buf[ct++]=v;
+ while ((v = va_arg(argp, int)) != -1)
+ buf[ct++] = v;
+
+ va_end(argp);
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
if (report & SAA7134_IRQ_REPORT_DONE_RA3) {
handled = 1;
- saa_writel(SAA7134_IRQ_REPORT,report);
+ saa_writel(SAA7134_IRQ_REPORT,
+ SAA7134_IRQ_REPORT_DONE_RA3);
saa7134_irq_alsa_done(dev, status);
} else {
goto out;
.buffer_bytes_max = (256*1024),
.period_bytes_min = 64,
.period_bytes_max = (256*1024),
- .periods_min = 2,
+ .periods_min = 4,
.periods_max = 1024,
};
snd_assert(period_size >= 0x100 && period_size <= 0x10000,
return -EINVAL);
- snd_assert(periods >= 2, return -EINVAL);
+ snd_assert(periods >= 4, return -EINVAL);
snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL);
dev = saa7134->dev;
saa7134_tvaudio_setmute(dev);
}
- if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ err = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (err < 0)
+ return err;
+
+ err = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIODS, 2);
+ if (err < 0)
return err;
return 0;
.tv = 1,
},{
.name = name_comp1,
- .vmux = 2,
+ .vmux = 0,
.amux = LINE1,
},{
.name = name_comp2,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
for (loop = 0; loop < 10; loop++) {
report = saa_readl(SAA7134_IRQ_REPORT);
status = saa_readl(SAA7134_IRQ_STATUS);
- if (0 == report) {
- if (irq_debug > 1)
- printk(KERN_DEBUG "%s/irq: no (more) work\n",
- dev->name);
- goto out;
- }
-
- /* If dmasound support is active and we get a sound report, exit
- and let the saa7134-alsa/oss module deal with it */
+ /* If dmasound support is active and we get a sound report,
+ * mask out the report and let the saa7134-alsa module deal
+ * with it */
if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
(dev->dmasound.priv_data != NULL) )
{
if (irq_debug > 1)
- printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n",
+ printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
+ dev->name);
+ report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
+ }
+
+ if (0 == report) {
+ if (irq_debug > 1)
+ printk(KERN_DEBUG "%s/irq: no (more) work\n",
dev->name);
goto out;
}
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
+ .tuner_config = 1,
.request_firmware = philips_tda1004x_request_firmware
};
{
struct saa7134_dev *dev = file->private_data;
- if (dev->empress_tsq.streaming)
- videobuf_streamoff(&dev->empress_tsq);
mutex_lock(&dev->empress_tsq.lock);
- if (dev->empress_tsq.reading)
- videobuf_read_stop(&dev->empress_tsq);
+ videobuf_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
dev->empress_users--;
/* stop vbi capture */
if (res_check(fh, RESOURCE_VBI)) {
- if (fh->vbi.streaming)
- videobuf_streamoff(&fh->vbi);
- if (fh->vbi.reading)
- videobuf_read_stop(&fh->vbi);
+ videobuf_stop(&fh->vbi);
res_free(dev,fh,RESOURCE_VBI);
}
int opmode=0;
struct tvp5150 *decoder = i2c_get_clientdata(c);
int input = 0;
+ unsigned char val;
if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable)
input = 8;
tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
+
+ /* Svideo should enable YCrCb output and disable GPCL output
+ * For Composite and TV, it should be the reverse
+ */
+ val = tvp5150_read(c, TVP5150_MISC_CTL);
+ if (decoder->route.input == TVP5150_SVIDEO)
+ val = (val & ~0x40) | 0x10;
+ else
+ val = (val & ~0x10) | 0x40;
+ tvp5150_write(c, TVP5150_MISC_CTL, val);
};
struct i2c_reg_value {
INIT_LIST_HEAD(&q->stream);
}
+/* Locking: Only usage in bttv unsafe find way to remove */
int videobuf_queue_is_busy(struct videobuf_queue *q)
{
int i;
return 0;
}
+/* Locking: Caller holds q->lock */
void videobuf_queue_cancel(struct videobuf_queue *q)
{
unsigned long flags=0;
/* --------------------------------------------------------------------- */
+/* Locking: Caller holds q->lock */
enum v4l2_field videobuf_next_field(struct videobuf_queue *q)
{
enum v4l2_field field = q->field;
return field;
}
+/* Locking: Caller holds q->lock */
static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b,
struct videobuf_buffer *vb, enum v4l2_buf_type type)
{
b->sequence = vb->field_count >> 1;
}
+/* Locking: Caller holds q->lock */
+static int __videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int i;
+ int rc;
+
+ if (!q)
+ return 0;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ rc = CALL(q,mmap_free,q);
+ if (rc<0)
+ return rc;
+
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ q->ops->buf_release(q,q->bufs[i]);
+ kfree(q->bufs[i]);
+ q->bufs[i] = NULL;
+ }
+
+ return rc;
+}
+
+int videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int ret;
+ mutex_lock(&q->lock);
+ ret = __videobuf_mmap_free(q);
+ mutex_unlock(&q->lock);
+ return ret;
+}
+
+/* Locking: Caller holds q->lock */
+static int __videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory)
+{
+ unsigned int i;
+ int err;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ err = __videobuf_mmap_free(q);
+ if (0 != err)
+ return err;
+
+ /* Allocate and initialize buffers */
+ for (i = 0; i < bcount; i++) {
+ q->bufs[i] = videobuf_alloc(q);
+
+ if (q->bufs[i] == NULL)
+ break;
+
+ q->bufs[i]->i = i;
+ q->bufs[i]->input = UNSET;
+ q->bufs[i]->memory = memory;
+ q->bufs[i]->bsize = bsize;
+ switch (memory) {
+ case V4L2_MEMORY_MMAP:
+ q->bufs[i]->boff = bsize * i;
+ break;
+ case V4L2_MEMORY_USERPTR:
+ case V4L2_MEMORY_OVERLAY:
+ /* nothing */
+ break;
+ }
+ }
+
+ if (!i)
+ return -ENOMEM;
+
+ dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
+ i, bsize);
+
+ return i;
+}
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory)
+{
+ int ret;
+ mutex_lock(&q->lock);
+ ret = __videobuf_mmap_setup(q, bcount, bsize, memory);
+ mutex_unlock(&q->lock);
+ return ret;
+}
+
int videobuf_reqbufs(struct videobuf_queue *q,
struct v4l2_requestbuffers *req)
{
unsigned int size,count;
int retval;
- if (req->type != q->type) {
- dprintk(1,"reqbufs: queue type invalid\n");
- return -EINVAL;
- }
if (req->count < 1) {
dprintk(1,"reqbufs: count invalid (%d)\n",req->count);
return -EINVAL;
}
+
if (req->memory != V4L2_MEMORY_MMAP &&
req->memory != V4L2_MEMORY_USERPTR &&
req->memory != V4L2_MEMORY_OVERLAY) {
}
mutex_lock(&q->lock);
+ if (req->type != q->type) {
+ dprintk(1,"reqbufs: queue type invalid\n");
+ retval = -EINVAL;
+ goto done;
+ }
+
if (q->streaming) {
dprintk(1,"reqbufs: streaming already exists\n");
retval = -EBUSY;
dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n",
count, size, (count*size)>>PAGE_SHIFT);
- retval = videobuf_mmap_setup(q,count,size,req->memory);
+ retval = __videobuf_mmap_setup(q,count,size,req->memory);
if (retval < 0) {
dprintk(1,"reqbufs: mmap setup returned %d\n",retval);
goto done;
int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
{
+ int ret = -EINVAL;
+
+ mutex_lock(&q->lock);
if (unlikely(b->type != q->type)) {
dprintk(1,"querybuf: Wrong type.\n");
- return -EINVAL;
+ goto done;
}
if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
dprintk(1,"querybuf: index out of range.\n");
- return -EINVAL;
+ goto done;
}
if (unlikely(NULL == q->bufs[b->index])) {
dprintk(1,"querybuf: buffer is null.\n");
- return -EINVAL;
+ goto done;
}
+
videobuf_status(q,b,q->bufs[b->index],q->type);
- return 0;
+
+ ret = 0;
+done:
+ mutex_unlock(&q->lock);
+ return ret;
}
int videobuf_qbuf(struct videobuf_queue *q,
return retval;
}
-int videobuf_streamoff(struct videobuf_queue *q)
+/* Locking: Caller holds q->lock */
+static int __videobuf_streamoff(struct videobuf_queue *q)
{
- int retval = -EINVAL;
-
- mutex_lock(&q->lock);
if (!q->streaming)
- goto done;
+ return -EINVAL;
+
videobuf_queue_cancel(q);
q->streaming = 0;
- retval = 0;
- done:
+ return 0;
+}
+
+int videobuf_streamoff(struct videobuf_queue *q)
+{
+ int retval;
+
+ mutex_lock(&q->lock);
+ retval = __videobuf_streamoff(q);
mutex_unlock(&q->lock);
+
return retval;
}
+/* Locking: Caller holds q->lock */
static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q,
char __user *data,
size_t count, loff_t *ppos)
return retval;
}
-int videobuf_read_start(struct videobuf_queue *q)
+/* Locking: Caller holds q->lock */
+int __videobuf_read_start(struct videobuf_queue *q)
{
enum v4l2_field field;
unsigned long flags=0;
count = VIDEO_MAX_FRAME;
size = PAGE_ALIGN(size);
- err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
+ err = __videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
if (err < 0)
return err;
return 0;
}
-void videobuf_read_stop(struct videobuf_queue *q)
+static void __videobuf_read_stop(struct videobuf_queue *q)
{
int i;
+
videobuf_queue_cancel(q);
- videobuf_mmap_free(q);
+ __videobuf_mmap_free(q);
INIT_LIST_HEAD(&q->stream);
for (i = 0; i < VIDEO_MAX_FRAME; i++) {
if (NULL == q->bufs[i])
}
q->read_buf = NULL;
q->reading = 0;
+
}
+int videobuf_read_start(struct videobuf_queue *q)
+{
+ int rc;
+
+ mutex_lock(&q->lock);
+ rc = __videobuf_read_start(q);
+ mutex_unlock(&q->lock);
+
+ return rc;
+}
+
+void videobuf_read_stop(struct videobuf_queue *q)
+{
+ mutex_lock(&q->lock);
+ __videobuf_read_stop(q);
+ mutex_unlock(&q->lock);
+}
+
+void videobuf_stop(struct videobuf_queue *q)
+{
+ mutex_lock(&q->lock);
+
+ if (q->streaming)
+ __videobuf_streamoff(q);
+
+ if (q->reading)
+ __videobuf_read_stop(q);
+
+ mutex_unlock(&q->lock);
+}
+
+
ssize_t videobuf_read_stream(struct videobuf_queue *q,
char __user *data, size_t count, loff_t *ppos,
int vbihack, int nonblocking)
if (q->streaming)
goto done;
if (!q->reading) {
- retval = videobuf_read_start(q);
+ retval = __videobuf_read_start(q);
if (retval < 0)
goto done;
}
struct videobuf_buffer, stream);
} else {
if (!q->reading)
- videobuf_read_start(q);
+ __videobuf_read_start(q);
if (!q->reading) {
rc = POLLERR;
} else if (NULL == q->read_buf) {
return rc;
}
-int videobuf_mmap_setup(struct videobuf_queue *q,
- unsigned int bcount, unsigned int bsize,
- enum v4l2_memory memory)
-{
- unsigned int i;
- int err;
-
- MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
-
- err = videobuf_mmap_free(q);
- if (0 != err)
- return err;
-
- /* Allocate and initialize buffers */
- for (i = 0; i < bcount; i++) {
- q->bufs[i] = videobuf_alloc(q);
-
- if (q->bufs[i] == NULL)
- break;
-
- q->bufs[i]->i = i;
- q->bufs[i]->input = UNSET;
- q->bufs[i]->memory = memory;
- q->bufs[i]->bsize = bsize;
- switch (memory) {
- case V4L2_MEMORY_MMAP:
- q->bufs[i]->boff = bsize * i;
- break;
- case V4L2_MEMORY_USERPTR:
- case V4L2_MEMORY_OVERLAY:
- /* nothing */
- break;
- }
- }
-
- if (!i)
- return -ENOMEM;
-
- dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
- i, bsize);
-
- return i;
-}
-
-int videobuf_mmap_free(struct videobuf_queue *q)
-{
- int i;
- int rc;
-
- if (!q)
- return 0;
-
- MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
-
- rc = CALL(q,mmap_free,q);
- if (rc<0)
- return rc;
-
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- q->ops->buf_release(q,q->bufs[i]);
- kfree(q->bufs[i]);
- q->bufs[i] = NULL;
- }
-
- return rc;
-}
-
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma)
{
EXPORT_SYMBOL_GPL(videobuf_read_start);
EXPORT_SYMBOL_GPL(videobuf_read_stop);
+EXPORT_SYMBOL_GPL(videobuf_stop);
EXPORT_SYMBOL_GPL(videobuf_read_stream);
EXPORT_SYMBOL_GPL(videobuf_read_one);
EXPORT_SYMBOL_GPL(videobuf_poll_stream);
{
struct videobuf_mapping *map = vma->vm_private_data;
- dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map,
+ dprintk(2,"vm_open %p [count=%u,vma=%08lx-%08lx]\n",map,
map->count,vma->vm_start,vma->vm_end);
map->count++;
struct videobuf_queue *q = map->q;
int i;
- dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map,
+ dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n",map,
map->count,vma->vm_start,vma->vm_end);
map->count--;
}
/* create mapping + update buffer list */
- map = q->bufs[first]->map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
+ map = q->bufs[first]->map = kzalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
if (NULL == map)
return -ENOMEM;
int minor = iminor(inode);
vivi_stop_thread(vidq);
+ videobuf_stop(&fh->vb_vidq);
videobuf_mmap_free(&fh->vb_vidq);
kfree (fh);
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
+ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
- KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
+ KEY_RESERVED, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ * - JMicron (hardware and technical support)
*/
#include <linux/delay.h>
static unsigned int debug_quirks = 0;
+/*
+ * Different quirks to handle when the hardware deviates from a strict
+ * interpretation of the SDHCI specification.
+ */
+
+/* Controller doesn't honor resets unless we touch the clock register */
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
+/* Controller has bad caps bits, but really supports DMA */
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
/* Controller doesn't like some resets when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
+/* Controller doesn't like clearing the power reg before a change */
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
+/* Controller has an unusable DMA engine */
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
},
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_RESET_AFTER_REQUEST,
+ },
+
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & SDHCI_USE_DMA)
+ host->flags |= SDHCI_REQ_USE_DMA;
+
+ if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) &&
+ ((data->blksz * data->blocks) & 0x3))) {
+ DBG("Reverting to PIO because of transfer size (%d)\n",
+ data->blksz * data->blocks);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ }
+
+ /*
+ * The assumption here being that alignment is the same after
+ * translation to device address space.
+ */
+ if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
+ (data->sg->offset & 0x3))) {
+ DBG("Reverting to PIO because of bad alignment\n");
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
int count;
count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len,
mode |= SDHCI_TRNS_MULTI;
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & SDHCI_REQ_USE_DMA)
mode |= SDHCI_TRNS_DMA;
writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
data = host->data;
host->data = NULL;
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & SDHCI_REQ_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
}
*/
if (mrq->cmd->error ||
(mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error)))) {
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) {
/* Some controllers need this kick or reset won't work here */
if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
version = readw(host->ioaddr + SDHCI_HOST_VERSION);
version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
- if (version != 0) {
+ if (version > 1) {
printk(KERN_ERR "%s: Unknown controller version (%d). "
"You may experience problems.\n", host->slot_descr,
version);
spinlock_t lock; /* Mutex */
int flags; /* Host attributes */
-#define SDHCI_USE_DMA (1<<0)
+#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
+#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */
unsigned int max_clk; /* Max possible freq (MHz) */
unsigned int timeout_clk; /* Timeout freq (KHz) */
config TEHUTI
tristate "Tehuti Networks 10G Ethernet"
depends on PCI
- select ZLIB_INFLATE
help
Tehuti Networks 10G Ethernet NIC
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.6.8"
-#define DRV_MODULE_RELDATE "October 17, 2007"
+#define DRV_MODULE_VERSION "1.6.9"
+#define DRV_MODULE_RELDATE "December 8, 2007"
#define RUN_AT(x) (jiffies + (x))
prod_bd->rx_bd_haddr_lo = cons_bd->rx_bd_haddr_lo;
}
+static inline u16
+bnx2_get_hw_rx_cons(struct bnx2 *bp)
+{
+ u16 cons = bp->status_blk->status_rx_quick_consumer_index0;
+
+ if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
+ cons++;
+ return cons;
+}
+
static int
bnx2_rx_int(struct bnx2 *bp, int budget)
{
- struct status_block *sblk = bp->status_blk;
u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
struct l2_fhdr *rx_hdr;
int rx_pkt = 0;
- hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
- if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
- hw_cons++;
- }
+ hw_cons = bnx2_get_hw_rx_cons(bp);
sw_cons = bp->rx_cons;
sw_prod = bp->rx_prod;
/* Refresh hw_cons to see if there is new work */
if (sw_cons == hw_cons) {
- hw_cons = bp->hw_rx_cons =
- sblk->status_rx_quick_consumer_index0;
- if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)
- hw_cons++;
+ hw_cons = bnx2_get_hw_rx_cons(bp);
rmb();
}
}
{
struct status_block *sblk = bp->status_blk;
- if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) ||
+ if ((bnx2_get_hw_rx_cons(bp) != bp->rx_cons) ||
(sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
return 1;
if (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)
bnx2_tx_int(bp);
- if (sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons)
+ if (bnx2_get_hw_rx_cons(bp) != bp->rx_cons)
work_done += bnx2_rx_int(bp, budget - work_done);
return work_done;
ring_prod = prod = bp->rx_prod = 0;
bp->rx_cons = 0;
- bp->hw_rx_cons = 0;
bp->rx_prod_bseq = 0;
for (i = 0; i < bp->rx_max_ring; i++) {
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG;
- else if (CHIP_ID(bp) == CHIP_ID_5709_A0 ||
- CHIP_ID(bp) == CHIP_ID_5709_A1)
+ else if (CHIP_NUM(bp) == CHIP_NUM_5709 &&
+ (CHIP_REV(bp) == CHIP_REV_Ax ||
+ CHIP_REV(bp) == CHIP_REV_Bx))
bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
u32 rx_prod_bseq;
u16 rx_prod;
u16 rx_cons;
- u16 hw_rx_cons;
u32 rx_csum;
#endif
/* Read eeprom */
for (i = 0; i < 128; i++) {
- ((u16 *) sromdata)[i] = le16_to_cpu (read_eeprom (ioaddr, i));
+ ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom (ioaddr, i));
}
#ifdef MEM_MAPPING
ioaddr = dev->base_addr;
PCI_DMA_FROMDEVICE));
}
np->rx_ring[entry].fraginfo |=
- cpu_to_le64 (np->rx_buf_sz) << 48;
+ cpu_to_le64((u64)np->rx_buf_sz << 48);
np->rx_ring[entry].status = 0;
} /* end for */
} /* end if */
cpu_to_le64 ( pci_map_single (
np->pdev, skb->data, np->rx_buf_sz,
PCI_DMA_FROMDEVICE));
- np->rx_ring[i].fraginfo |= cpu_to_le64 (np->rx_buf_sz) << 48;
+ np->rx_ring[i].fraginfo |= cpu_to_le64((u64)np->rx_buf_sz << 48);
}
/* Set RFDListPtr */
- writel (cpu_to_le32 (np->rx_ring_dma), dev->base_addr + RFDListPtr0);
+ writel (np->rx_ring_dma, dev->base_addr + RFDListPtr0);
writel (0, dev->base_addr + RFDListPtr1);
return;
}
#endif
if (np->vlan) {
- tfc_vlan_tag =
- cpu_to_le64 (VLANTagInsert) |
- (cpu_to_le64 (np->vlan) << 32) |
- (cpu_to_le64 (skb->priority) << 45);
+ tfc_vlan_tag = VLANTagInsert |
+ ((u64)np->vlan << 32) |
+ ((u64)skb->priority << 45);
}
txdesc->fraginfo = cpu_to_le64 (pci_map_single (np->pdev, skb->data,
skb->len,
PCI_DMA_TODEVICE));
- txdesc->fraginfo |= cpu_to_le64 (skb->len) << 48;
+ txdesc->fraginfo |= cpu_to_le64((u64)skb->len << 48);
/* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode
* Work around: Always use 1 descriptor in 10Mbps mode */
return IRQ_RETVAL(handled);
}
+static inline dma_addr_t desc_to_dma(struct netdev_desc *desc)
+{
+ return le64_to_cpu(desc->fraginfo) & DMA_48BIT_MASK;
+}
+
static void
rio_free_tx (struct net_device *dev, int irq)
{
while (entry != np->cur_tx) {
struct sk_buff *skb;
- if (!(np->tx_ring[entry].status & TFDDone))
+ if (!(np->tx_ring[entry].status & cpu_to_le64(TFDDone)))
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo & DMA_48BIT_MASK,
+ desc_to_dma(&np->tx_ring[entry]),
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
int pkt_len;
u64 frame_status;
- if (!(desc->status & RFDDone) ||
- !(desc->status & FrameStart) || !(desc->status & FrameEnd))
+ if (!(desc->status & cpu_to_le64(RFDDone)) ||
+ !(desc->status & cpu_to_le64(FrameStart)) ||
+ !(desc->status & cpu_to_le64(FrameEnd)))
break;
/* Chip omits the CRC. */
- pkt_len = le64_to_cpu (desc->status & 0xffff);
- frame_status = le64_to_cpu (desc->status);
+ frame_status = le64_to_cpu(desc->status);
+ pkt_len = frame_status & 0xffff;
if (--cnt < 0)
break;
/* Update rx error statistics, drop packet. */
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
pci_unmap_single (np->pdev,
- desc->fraginfo & DMA_48BIT_MASK,
+ desc_to_dma(desc),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
- desc->fraginfo &
- DMA_48BIT_MASK,
+ desc_to_dma(desc),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
/* 16 byte align the IP header */
pkt_len);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
- desc->fraginfo &
- DMA_48BIT_MASK,
+ desc_to_dma(desc),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
PCI_DMA_FROMDEVICE));
}
np->rx_ring[entry].fraginfo |=
- cpu_to_le64 (np->rx_buf_sz) << 48;
+ cpu_to_le64((u64)np->rx_buf_sz << 48);
np->rx_ring[entry].status = 0;
entry = (entry + 1) % RX_RING_SIZE;
}
hash_table[0] = hash_table[1] = 0;
/* RxFlowcontrol DA: 01-80-C2-00-00-01. Hash index=0x39 */
- hash_table[1] |= cpu_to_le32(0x02000000);
+ hash_table[1] |= 0x02000000;
if (dev->flags & IFF_PROMISC) {
/* Receive all frames promiscuously. */
rx_mode = ReceiveAllFrames;
skb = np->rx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->rx_ring[i].fraginfo & DMA_48BIT_MASK,
+ desc_to_dma(&np->rx_ring[i]),
skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->tx_ring[i].fraginfo & DMA_48BIT_MASK,
+ desc_to_dma(&np->tx_ring[i]),
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
/* The Rx and Tx buffer descriptors. */
struct netdev_desc {
- u64 next_desc;
- u64 status;
- u64 fraginfo;
+ __le64 next_desc;
+ __le64 status;
+ __le64 fraginfo;
};
#define PRIV_ALIGN 15 /* Required alignment mask */
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- pci_disable_device(pdev);
free_irq(pdev->irq, netdev);
+
+ pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ free_irq(pdev->irq, netdev);
+
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
}
struct mpc52xx_fec __iomem *fec = priv->fec;
out_be32(&fec->mib_control, FEC_MIB_DISABLE);
- memset_io(&fec->rmon_t_drop, 0, (__force u32)&fec->reserved10 -
- (__force u32)&fec->rmon_t_drop);
+ memset_io(&fec->rmon_t_drop, 0,
+ offsetof(struct mpc52xx_fec, reserved10) -
+ offsetof(struct mpc52xx_fec, rmon_t_drop));
out_be32(&fec->mib_control, 0);
memset(&dev->stats, 0, sizeof(dev->stats));
{
struct fs_enet_private *fep = netdev_priv(dev);
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
struct fs_platform_info *fpi = fep->fpi;
fep->scc.idx = fs_get_scc_index(fpi->fs_no);
/* Condensed bus+endian portability operations. */
#if ADDRLEN == 64
#define cpu_to_leXX(addr) cpu_to_le64(addr)
+#define leXX_to_cpu(addr) le64_to_cpu(addr)
#else
#define cpu_to_leXX(addr) cpu_to_le32(addr)
+#define leXX_to_cpu(addr) le32_to_cpu(addr)
#endif
/* The Hamachi Rx and Tx buffer descriptors. */
struct hamachi_desc {
- u32 status_n_length;
+ __le32 status_n_length;
#if ADDRLEN == 64
u32 pad;
- u64 addr;
+ __le64 addr;
#else
- u32 addr;
+ __le32 addr;
#endif
};
#if ADDRLEN == 64
/* writellll anyone ? */
- writel(cpu_to_le64(hmp->rx_ring_dma), ioaddr + RxPtr);
- writel(cpu_to_le64(hmp->rx_ring_dma) >> 32, ioaddr + RxPtr + 4);
- writel(cpu_to_le64(hmp->tx_ring_dma), ioaddr + TxPtr);
- writel(cpu_to_le64(hmp->tx_ring_dma) >> 32, ioaddr + TxPtr + 4);
+ writel(hmp->rx_ring_dma, ioaddr + RxPtr);
+ writel(hmp->rx_ring_dma >> 32, ioaddr + RxPtr + 4);
+ writel(hmp->tx_ring_dma, ioaddr + TxPtr);
+ writel(hmp->tx_ring_dma >> 32, ioaddr + TxPtr + 4);
#else
- writel(cpu_to_le32(hmp->rx_ring_dma), ioaddr + RxPtr);
- writel(cpu_to_le32(hmp->tx_ring_dma), ioaddr + TxPtr);
+ writel(hmp->rx_ring_dma, ioaddr + RxPtr);
+ writel(hmp->tx_ring_dma, ioaddr + TxPtr);
#endif
/* TODO: It would make sense to organize this as words since the card
skb = hmp->tx_skbuff[entry];
if (skb) {
pci_unmap_single(hmp->pci_dev,
- hmp->tx_ring[entry].addr, skb->len,
- PCI_DMA_TODEVICE);
+ leXX_to_cpu(hmp->tx_ring[entry].addr),
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
hmp->tx_skbuff[entry] = NULL;
}
{
printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)hmp->rx_ring[i].status_n_length);
+ printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", hmp->tx_ring[i].status_n_length);
+ printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
printk("\n");
}
struct sk_buff *skb;
if (i >= TX_RING_SIZE - 1)
- hmp->tx_ring[i].status_n_length = cpu_to_le32(
- DescEndRing |
- (hmp->tx_ring[i].status_n_length & 0x0000FFFF));
+ hmp->tx_ring[i].status_n_length =
+ cpu_to_le32(DescEndRing) |
+ (hmp->tx_ring[i].status_n_length &
+ cpu_to_le32(0x0000ffff));
else
- hmp->tx_ring[i].status_n_length &= 0x0000ffff;
+ hmp->tx_ring[i].status_n_length &= cpu_to_le32(0x0000ffff);
skb = hmp->tx_skbuff[i];
if (skb){
- pci_unmap_single(hmp->pci_dev, hmp->tx_ring[i].addr,
+ pci_unmap_single(hmp->pci_dev, leXX_to_cpu(hmp->tx_ring[i].addr),
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
hmp->tx_skbuff[i] = NULL;
struct sk_buff *skb = hmp->rx_skbuff[i];
if (skb){
- pci_unmap_single(hmp->pci_dev, hmp->rx_ring[i].addr,
+ pci_unmap_single(hmp->pci_dev,
+ leXX_to_cpu(hmp->rx_ring[i].addr),
hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
hmp->rx_skbuff[i] = NULL;
/* Free the original skb. */
if (skb){
pci_unmap_single(hmp->pci_dev,
- hmp->tx_ring[entry].addr,
+ leXX_to_cpu(hmp->tx_ring[entry].addr),
skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
if (desc_status & DescOwn)
break;
pci_dma_sync_single_for_cpu(hmp->pci_dev,
- desc->addr,
+ leXX_to_cpu(desc->addr),
hmp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
buf_addr = (u8 *) hmp->rx_skbuff[entry]->data;
- frame_status = le32_to_cpu(get_unaligned((s32*)&(buf_addr[data_size - 12])));
+ frame_status = le32_to_cpu(get_unaligned((__le32*)&(buf_addr[data_size - 12])));
if (hamachi_debug > 4)
printk(KERN_DEBUG " hamachi_rx() status was %8.8x.\n",
frame_status);
dev->name, desc, &hmp->rx_ring[hmp->cur_rx % RX_RING_SIZE]);
printk(KERN_WARNING "%s: Oversized Ethernet frame -- next status %x/%x last status %x.\n",
dev->name,
- hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0xffff0000,
- hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0x0000ffff,
- hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length);
+ le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0xffff0000,
+ le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0x0000ffff,
+ le32_to_cpu(hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length));
hmp->stats.rx_length_errors++;
} /* else Omit for prototype errata??? */
if (frame_status & 0x00380000) {
#endif
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single_for_cpu(hmp->pci_dev,
- hmp->rx_ring[entry].addr,
+ leXX_to_cpu(hmp->rx_ring[entry].addr),
hmp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
/* Call copy + cksum if available. */
+ entry*sizeof(*desc), pkt_len);
#endif
pci_dma_sync_single_for_device(hmp->pci_dev,
- hmp->rx_ring[entry].addr,
+ leXX_to_cpu(hmp->rx_ring[entry].addr),
hmp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
} else {
pci_unmap_single(hmp->pci_dev,
- hmp->rx_ring[entry].addr,
+ leXX_to_cpu(hmp->rx_ring[entry].addr),
hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
skb_put(skb = hmp->rx_skbuff[entry], pkt_len);
hmp->rx_skbuff[entry] = NULL;
for (i = 0; i < RX_RING_SIZE; i++) {
skb = hmp->rx_skbuff[i];
hmp->rx_ring[i].status_n_length = 0;
- hmp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */
if (skb) {
pci_unmap_single(hmp->pci_dev,
- hmp->rx_ring[i].addr, hmp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
+ leXX_to_cpu(hmp->rx_ring[i].addr),
+ hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
hmp->rx_skbuff[i] = NULL;
}
+ hmp->rx_ring[i].addr = cpu_to_leXX(0xBADF00D0); /* An invalid address. */
}
for (i = 0; i < TX_RING_SIZE; i++) {
skb = hmp->tx_skbuff[i];
if (skb) {
pci_unmap_single(hmp->pci_dev,
- hmp->tx_ring[i].addr, skb->len,
- PCI_DMA_TODEVICE);
+ leXX_to_cpu(hmp->tx_ring[i].addr),
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
hmp->tx_skbuff[i] = NULL;
}
#include "core.h"
-static spinlock_t emac_dbg_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(emac_dbg_lock);
static void emac_desc_dump(struct emac_instance *p)
{
static int irda_usb_net_open(struct net_device *netdev)
{
struct irda_usb_cb *self;
+ unsigned long flags;
char hwname[16];
int i;
self = (struct irda_usb_cb *) netdev->priv;
IRDA_ASSERT(self != NULL, return -1;);
+ spin_lock_irqsave(&self->lock, flags);
/* Can only open the device if it's there */
if(!self->present) {
+ spin_unlock_irqrestore(&self->lock, flags);
IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
return -1;
}
if(self->needspatch) {
+ spin_unlock_irqrestore(&self->lock, flags);
IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
return -EIO ;
}
/* To do *before* submitting Rx urbs and starting net Tx queue
* Jean II */
self->netopen = 1;
+ spin_unlock_irqrestore(&self->lock, flags);
/*
* Now that everything should be initialized properly,
/* Stop transmit processing */
netif_stop_queue(netdev);
+ kfree_skb(mcs->rx_buff.skb);
+
/* kill and free the receive and transmit URBs */
usb_kill_urb(mcs->rx_urb);
usb_free_urb(mcs->rx_urb);
};
enum StirFifoCtlMask {
- FIFOCTL_EOF = 0x80,
- FIFOCTL_UNDER = 0x40,
- FIFOCTL_OVER = 0x20,
FIFOCTL_DIR = 0x10,
FIFOCTL_CLR = 0x08,
FIFOCTL_EMPTY = 0x04,
{
int err;
unsigned long count, status;
+ unsigned long prev_count = 0x1fff;
/* Read FIFO status and count */
- for(;;) {
+ for (;; prev_count = count) {
err = read_reg(stir, REG_FIFOCTL, stir->fifo_status,
FIFO_REGS_SIZE);
if (unlikely(err != FIFO_REGS_SIZE)) {
if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count)
return 0;
+ /* queue confused */
+ if (prev_count < count)
+ break;
+
/* estimate transfer time for remaining chars */
msleep((count * 8000) / stir->speed);
}
void
ixgb_reset(struct ixgb_adapter *adapter)
{
+ struct ixgb_hw *hw = &adapter->hw;
- ixgb_adapter_stop(&adapter->hw);
- if(!ixgb_init_hw(&adapter->hw))
+ ixgb_adapter_stop(hw);
+ if (!ixgb_init_hw(hw))
DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n");
+
+ /* restore frame size information */
+ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
+ if (hw->max_frame_size >
+ IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
+ if (!(ctrl0 & IXGB_CTRL0_JFE)) {
+ ctrl0 |= IXGB_CTRL0_JFE;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0);
+ }
+ }
}
/**
struct net_device *dev = link->priv;
struct el3_private *lp = netdev_priv(dev);
tuple_t tuple;
- unsigned short buf[32];
+ __le16 buf[32];
int last_fn, last_ret, i, j;
kio_addr_t ioaddr;
- u16 *phys_addr;
+ __be16 *phys_addr;
char *cardname;
union wn3_config config;
DECLARE_MAC_BUF(mac);
- phys_addr = (u16 *)dev->dev_addr;
+ phys_addr = (__be16 *)dev->dev_addr;
DEBUG(0, "3c574_config(0x%p)\n", link);
if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
- phys_addr[i] = htons(buf[i]);
+ phys_addr[i] = htons(le16_to_cpu(buf[i]));
} else {
EL3WINDOW(0);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
- if (phys_addr[0] == 0x6060) {
+ if (phys_addr[0] == htons(0x6060)) {
printk(KERN_NOTICE "3c574_cs: IO port conflict at 0x%03lx"
"-0x%03lx\n", dev->base_addr, dev->base_addr+15);
goto failed;
struct net_device *dev = link->priv;
struct el3_private *lp = netdev_priv(dev);
tuple_t tuple;
- u16 buf[32], *phys_addr;
+ __le16 buf[32];
+ __be16 *phys_addr;
int last_fn, last_ret, i, j, multi = 0, fifo;
kio_addr_t ioaddr;
char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
DEBUG(0, "3c589_config(0x%p)\n", link);
- phys_addr = (u16 *)dev->dev_addr;
+ phys_addr = (__be16 *)dev->dev_addr;
tuple.Attributes = 0;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleDataMax = sizeof(buf);
if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
- phys_addr[i] = htons(buf[i]);
+ phys_addr[i] = htons(le16_to_cpu(buf[i]));
} else {
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i));
- if (phys_addr[0] == 0x6060) {
+ if (phys_addr[0] == htons(0x6060)) {
printk(KERN_ERR "3c589_cs: IO port conflict at 0x%03lx"
"-0x%03lx\n", dev->base_addr, dev->base_addr+15);
goto failed;
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
+ PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
0xb4be14e3, 0x43ac239b, 0x0877b627),
PCMCIA_DEVICE_NULL
static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc)
{
- desc->addr = 0x0badbadbadbadbadull;
+ desc->addr = cpu_to_le64(0x0badbadbadbadbadull);
desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask);
}
}
/* Work around for AMD plateform. */
- if ((desc->opts2 & 0xfffe000) &&
+ if ((desc->opts2 & cpu_to_le32(0xfffe000)) &&
(tp->mac_version == RTL_GIGA_MAC_VER_05)) {
desc->opts2 = 0;
cur_rx++;
{
struct rr_private *rrpriv;
struct rr_regs __iomem *regs;
- struct eeprom *hw = NULL;
u32 start_pc;
int i;
writel(RBURST_64|WBURST_64, ®s->PciState);
wmb();
- start_pc = rr_read_eeprom_word(rrpriv, &hw->rncd_info.FwStart);
+ start_pc = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, rncd_info.FwStart));
#if (DEBUG > 1)
printk("%s: Executing firmware at address 0x%06x\n",
* it to our CPU byte-order.
*/
static u32 rr_read_eeprom_word(struct rr_private *rrpriv,
- void * offset)
+ size_t offset)
{
- u32 word;
+ __be32 word;
- if ((rr_read_eeprom(rrpriv, (unsigned long)offset,
- (char *)&word, 4) == 4))
+ if ((rr_read_eeprom(rrpriv, offset,
+ (unsigned char *)&word, 4) == 4))
return be32_to_cpu(word);
return 0;
}
{
struct rr_private *rrpriv;
struct rr_regs __iomem *regs;
- struct eeprom *hw = NULL;
u32 sram_size, rev;
DECLARE_MAC_BUF(mac);
* other method I've seen. -VAL
*/
- *(u16 *)(dev->dev_addr) =
- htons(rr_read_eeprom_word(rrpriv, &hw->manf.BoardULA));
- *(u32 *)(dev->dev_addr+2) =
- htonl(rr_read_eeprom_word(rrpriv, &hw->manf.BoardULA[4]));
+ *(__be16 *)(dev->dev_addr) =
+ htons(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA)));
+ *(__be32 *)(dev->dev_addr+2) =
+ htonl(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA[4])));
printk(" MAC: %s\n", print_mac(mac, dev->dev_addr));
- sram_size = rr_read_eeprom_word(rrpriv, (void *)8);
+ sram_size = rr_read_eeprom_word(rrpriv, 8);
printk(" SRAM size 0x%06x\n", sram_size);
return 0;
{
struct rr_private *rrpriv;
struct rr_regs __iomem *regs;
- unsigned long eptr, segptr;
+ size_t eptr, segptr;
int i, j;
u32 localctrl, sptr, len, tmp;
u32 p2len, p2size, nr_seg, revision, io, sram_size;
- struct eeprom *hw = NULL;
rrpriv = netdev_priv(dev);
regs = rrpriv->regs;
*/
io = readl(®s->ExtIo);
writel(0, ®s->ExtIo);
- sram_size = rr_read_eeprom_word(rrpriv, (void *)8);
+ sram_size = rr_read_eeprom_word(rrpriv, 8);
for (i = 200; i < sram_size / 4; i++){
writel(i * 4, ®s->WinBase);
writel(io, ®s->ExtIo);
mb();
- eptr = (unsigned long)rr_read_eeprom_word(rrpriv,
- &hw->rncd_info.AddrRunCodeSegs);
+ eptr = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, rncd_info.AddrRunCodeSegs));
eptr = ((eptr & 0x1fffff) >> 3);
- p2len = rr_read_eeprom_word(rrpriv, (void *)(0x83*4));
+ p2len = rr_read_eeprom_word(rrpriv, 0x83*4);
p2len = (p2len << 2);
- p2size = rr_read_eeprom_word(rrpriv, (void *)(0x84*4));
+ p2size = rr_read_eeprom_word(rrpriv, 0x84*4);
p2size = ((p2size & 0x1fffff) >> 3);
if ((eptr < p2size) || (eptr > (p2size + p2len))){
goto out;
}
- revision = rr_read_eeprom_word(rrpriv, &hw->manf.HeaderFmt);
+ revision = rr_read_eeprom_word(rrpriv,
+ offsetof(struct eeprom, manf.HeaderFmt));
if (revision != 1){
printk("%s: invalid firmware format (%i)\n",
goto out;
}
- nr_seg = rr_read_eeprom_word(rrpriv, (void *)eptr);
+ nr_seg = rr_read_eeprom_word(rrpriv, eptr);
eptr +=4;
#if (DEBUG > 1)
printk("%s: nr_seg %i\n", dev->name, nr_seg);
#endif
for (i = 0; i < nr_seg; i++){
- sptr = rr_read_eeprom_word(rrpriv, (void *)eptr);
+ sptr = rr_read_eeprom_word(rrpriv, eptr);
eptr += 4;
- len = rr_read_eeprom_word(rrpriv, (void *)eptr);
+ len = rr_read_eeprom_word(rrpriv, eptr);
eptr += 4;
- segptr = (unsigned long)rr_read_eeprom_word(rrpriv, (void *)eptr);
+ segptr = rr_read_eeprom_word(rrpriv, eptr);
segptr = ((segptr & 0x1fffff) >> 3);
eptr += 4;
#if (DEBUG > 1)
dev->name, i, sptr, len, segptr);
#endif
for (j = 0; j < len; j++){
- tmp = rr_read_eeprom_word(rrpriv, (void *)segptr);
+ tmp = rr_read_eeprom_word(rrpriv, segptr);
writel(sptr, ®s->WinBase);
mb();
writel(tmp, ®s->WinData);
unsigned long offset,
unsigned char *buf,
unsigned long length);
-static u32 rr_read_eeprom_word(struct rr_private *rrpriv, void * offset);
+static u32 rr_read_eeprom_word(struct rr_private *rrpriv, size_t offset);
static int rr_load_firmware(struct net_device *dev);
static inline void rr_raz_tx(struct rr_private *, struct net_device *);
static inline void rr_raz_rx(struct rr_private *, struct net_device *);
}
/* Handle software interrupt used during MSI(X) test */
-static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id)
+static irqreturn_t s2io_test_intr(int irq, void *dev_id)
{
struct s2io_nic *sp = dev_id;
}
/* Test interrupt path by forcing a a software IRQ */
-static int __devinit s2io_test_msi(struct s2io_nic *sp)
+static int s2io_test_msi(struct s2io_nic *sp)
{
struct pci_dev *pdev = sp->pdev;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
static inline void sis190_make_unusable_by_asic(struct RxDesc *desc)
{
desc->PSize = 0x0;
- desc->addr = 0xdeadbeef;
+ desc->addr = cpu_to_le32(0xdeadbeef);
desc->size &= cpu_to_le32(RingEnd);
wmb();
desc->status = 0x0;
struct RxDesc *desc = tp->RxDescRing + entry;
u32 status;
- if (desc->status & OWNbit)
+ if (le32_to_cpu(desc->status) & OWNbit)
break;
status = le32_to_cpu(desc->PSize);
return rc;
}
-static void __devexit sis190_mii_remove(struct net_device *dev)
+static void sis190_mii_remove(struct net_device *dev)
{
struct sis190_private *tp = netdev_priv(dev);
/* Get MAC address from EEPROM */
for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
- __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+ u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
- ((u16 *)dev->dev_addr)[i] = le16_to_cpu(w);
+ ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w);
}
sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
- /* Flush Rx MAC FIFO on any flow control or error */
- sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ /* Hardware errata - clear flush mask */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
+ } else {
+ /* Flush Rx MAC FIFO on any flow control or error */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ }
/* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
reg = RX_GMF_FL_THR_DEF + 1;
-#if SMC_USE_PXA_DMA
+#ifdef SMC_USE_PXA_DMA
#define SMC_USE_DMA
/*
if (vlan_group_get_device(np->vlgrp, i)) {
if (vlan_count >= 32)
break;
- writew(cpu_to_be16(i), filter_addr);
+ writew(i, filter_addr);
filter_addr += 16;
vlan_count++;
}
/* Note that using only 32 bit fields simplifies conversion to big-endian
architectures. */
struct netdev_desc {
- u32 next_desc;
- u32 status;
- struct desc_frag { u32 addr, length; } frag[1];
+ __le32 next_desc;
+ __le32 status;
+ struct desc_frag { __le32 addr, length; } frag[1];
};
/* Bits in netdev_desc.status */
goto err_out_res;
for (i = 0; i < 3; i++)
- ((u16 *)dev->dev_addr)[i] =
- le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
+ ((__le16 *)dev->dev_addr)[i] =
+ cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->base_addr = (unsigned long)ioaddr;
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pci_dev,
- np->tx_ring[i].frag[0].addr, skb->len,
- PCI_DMA_TODEVICE);
+ le32_to_cpu(np->tx_ring[i].frag[0].addr),
+ skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
else
skb = np->tx_skbuff[entry];
/* Free the original skb. */
pci_unmap_single(np->pci_dev,
- np->tx_ring[entry].frag[0].addr,
+ le32_to_cpu(np->tx_ring[entry].frag[0].addr),
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq (np->tx_skbuff[entry]);
np->tx_skbuff[entry] = NULL;
skb = np->tx_skbuff[entry];
/* Free the original skb. */
pci_unmap_single(np->pci_dev,
- np->tx_ring[entry].frag[0].addr,
+ le32_to_cpu(np->tx_ring[entry].frag[0].addr),
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq (np->tx_skbuff[entry]);
np->tx_skbuff[entry] = NULL;
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single_for_cpu(np->pci_dev,
- desc->frag[0].addr,
+ le32_to_cpu(desc->frag[0].addr),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
- desc->frag[0].addr,
+ le32_to_cpu(desc->frag[0].addr),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put(skb, pkt_len);
} else {
pci_unmap_single(np->pci_dev,
- desc->frag[0].addr,
+ le32_to_cpu(desc->frag[0].addr),
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put(skb = np->rx_skbuff[entry], pkt_len);
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
np->rx_ring[i].status = 0;
- np->rx_ring[i].frag[0].addr = 0xBADF00D0; /* An invalid address. */
skb = np->rx_skbuff[i];
if (skb) {
pci_unmap_single(np->pci_dev,
- np->rx_ring[i].frag[0].addr, np->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
+ le32_to_cpu(np->rx_ring[i].frag[0].addr),
+ np->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
np->rx_skbuff[i] = NULL;
}
+ np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */
}
for (i = 0; i < TX_RING_SIZE; i++) {
np->tx_ring[i].next_desc = 0;
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pci_dev,
- np->tx_ring[i].frag[0].addr, skb->len,
- PCI_DMA_TODEVICE);
+ le32_to_cpu(np->tx_ring[i].frag[0].addr),
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
np->tx_skbuff[i] = NULL;
}
}
static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val);
+static int tg3_nvram_read_le(struct tg3 *tp, u32 offset, __le32 *val);
static int tg3_nvram_read_swab(struct tg3 *tp, u32 offset, u32 *val);
static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
struct tg3 *tp = netdev_priv(dev);
int ret;
u8 *pd;
- u32 i, offset, len, val, b_offset, b_count;
+ u32 i, offset, len, b_offset, b_count;
+ __le32 val;
if (tp->link_config.phy_is_low_power)
return -EAGAIN;
/* i.e. offset=1 len=2 */
b_count = len;
}
- ret = tg3_nvram_read(tp, offset-b_offset, &val);
+ ret = tg3_nvram_read_le(tp, offset-b_offset, &val);
if (ret)
return ret;
- val = cpu_to_le32(val);
memcpy(data, ((char*)&val) + b_offset, b_count);
len -= b_count;
offset += b_count;
/* read bytes upto the last 4 byte boundary */
pd = &data[eeprom->len];
for (i = 0; i < (len - (len & 3)); i += 4) {
- ret = tg3_nvram_read(tp, offset + i, &val);
+ ret = tg3_nvram_read_le(tp, offset + i, &val);
if (ret) {
eeprom->len += i;
return ret;
}
- val = cpu_to_le32(val);
memcpy(pd + i, &val, 4);
}
eeprom->len += i;
pd = &data[eeprom->len];
b_count = len & 3;
b_offset = offset + len - b_count;
- ret = tg3_nvram_read(tp, b_offset, &val);
+ ret = tg3_nvram_read_le(tp, b_offset, &val);
if (ret)
return ret;
- val = cpu_to_le32(val);
- memcpy(pd, ((char*)&val), b_count);
+ memcpy(pd, &val, b_count);
eeprom->len += b_count;
}
return 0;
{
struct tg3 *tp = netdev_priv(dev);
int ret;
- u32 offset, len, b_offset, odd_len, start, end;
+ u32 offset, len, b_offset, odd_len;
u8 *buf;
+ __le32 start, end;
if (tp->link_config.phy_is_low_power)
return -EAGAIN;
if ((b_offset = (offset & 3))) {
/* adjustments to start on required 4 byte boundary */
- ret = tg3_nvram_read(tp, offset-b_offset, &start);
+ ret = tg3_nvram_read_le(tp, offset-b_offset, &start);
if (ret)
return ret;
- start = cpu_to_le32(start);
len += b_offset;
offset &= ~3;
if (len < 4)
/* adjustments to end on required 4 byte boundary */
odd_len = 1;
len = (len + 3) & ~3;
- ret = tg3_nvram_read(tp, offset+len-4, &end);
+ ret = tg3_nvram_read_le(tp, offset+len-4, &end);
if (ret)
return ret;
- end = cpu_to_le32(end);
}
buf = data;
static int tg3_test_nvram(struct tg3 *tp)
{
- u32 *buf, csum, magic;
+ u32 csum, magic;
+ __le32 *buf;
int i, j, k, err = 0, size;
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
err = -EIO;
for (i = 0, j = 0; i < size; i += 4, j++) {
- u32 val;
-
- if ((err = tg3_nvram_read(tp, i, &val)) != 0)
+ if ((err = tg3_nvram_read_le(tp, i, &buf[j])) != 0)
break;
- buf[j] = cpu_to_le32(val);
}
if (i < size)
goto out;
/* Selfboot format */
- if ((cpu_to_be32(buf[0]) & TG3_EEPROM_MAGIC_FW_MSK) ==
+ magic = swab32(le32_to_cpu(buf[0]));
+ if ((magic & TG3_EEPROM_MAGIC_FW_MSK) ==
TG3_EEPROM_MAGIC_FW) {
u8 *buf8 = (u8 *) buf, csum8 = 0;
- if ((cpu_to_be32(buf[0]) & TG3_EEPROM_SB_REVISION_MASK) ==
+ if ((magic & TG3_EEPROM_SB_REVISION_MASK) ==
TG3_EEPROM_SB_REVISION_2) {
/* For rev 2, the csum doesn't include the MBA. */
for (i = 0; i < TG3_EEPROM_SB_F1R2_MBA_OFF; i++)
goto out;
}
- if ((cpu_to_be32(buf[0]) & TG3_EEPROM_MAGIC_HW_MSK) ==
+ if ((magic & TG3_EEPROM_MAGIC_HW_MSK) ==
TG3_EEPROM_MAGIC_HW) {
u8 data[NVRAM_SELFBOOT_DATA_SIZE];
u8 parity[NVRAM_SELFBOOT_DATA_SIZE];
/* Bootstrap checksum at offset 0x10 */
csum = calc_crc((unsigned char *) buf, 0x10);
- if(csum != cpu_to_le32(buf[0x10/4]))
+ if(csum != le32_to_cpu(buf[0x10/4]))
goto out;
/* Manufacturing block starts at offset 0x74, checksum at 0xfc */
csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88);
- if (csum != cpu_to_le32(buf[0xfc/4]))
+ if (csum != le32_to_cpu(buf[0xfc/4]))
goto out;
err = 0;
return ret;
}
+static int tg3_nvram_read_le(struct tg3 *tp, u32 offset, __le32 *val)
+{
+ u32 v;
+ int res = tg3_nvram_read(tp, offset, &v);
+ if (!res)
+ *val = cpu_to_le32(v);
+ return res;
+}
+
static int tg3_nvram_read_swab(struct tg3 *tp, u32 offset, u32 *val)
{
int err;
u32 val;
for (i = 0; i < len; i += 4) {
- u32 addr, data;
+ u32 addr;
+ __le32 data;
addr = offset + i;
memcpy(&data, buf + i, 4);
- tw32(GRC_EEPROM_DATA, cpu_to_le32(data));
+ tw32(GRC_EEPROM_DATA, le32_to_cpu(data));
val = tr32(GRC_EEPROM_ADDR);
tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
phy_addr = offset & ~pagemask;
for (j = 0; j < pagesize; j += 4) {
- if ((ret = tg3_nvram_read(tp, phy_addr + j,
- (u32 *) (tmp + j))))
+ if ((ret = tg3_nvram_read_le(tp, phy_addr + j,
+ (__le32 *) (tmp + j))))
break;
}
if (ret)
break;
for (j = 0; j < pagesize; j += 4) {
- u32 data;
+ __be32 data;
- data = *((u32 *) (tmp + j));
- tw32(NVRAM_WRDATA, cpu_to_be32(data));
+ data = *((__be32 *) (tmp + j));
+ /* swab32(le32_to_cpu(data)), actually */
+ tw32(NVRAM_WRDATA, be32_to_cpu(data));
tw32(NVRAM_ADDR, phy_addr + j);
int i, ret = 0;
for (i = 0; i < len; i += 4, offset += 4) {
- u32 data, page_off, phy_addr, nvram_cmd;
+ u32 page_off, phy_addr, nvram_cmd;
+ __be32 data;
memcpy(&data, buf + i, 4);
- tw32(NVRAM_WRDATA, cpu_to_be32(data));
+ tw32(NVRAM_WRDATA, be32_to_cpu(data));
page_off = offset % tp->nvram_pagesize;
vpd_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_VPD);
for (i = 0; i < 256; i += 4) {
u32 tmp, j = 0;
+ __le32 v;
u16 tmp16;
pci_write_config_word(tp->pdev, vpd_cap + PCI_VPD_ADDR,
pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
&tmp);
- tmp = cpu_to_le32(tmp);
- memcpy(&vpd_data[i], &tmp, 4);
+ v = cpu_to_le32(tmp);
+ memcpy(&vpd_data[i], &v, 4);
}
}
offset = offset + ver_offset - start;
for (i = 0; i < 16; i += 4) {
- if (tg3_nvram_read(tp, offset + i, &val))
+ __le32 v;
+ if (tg3_nvram_read_le(tp, offset + i, &v))
return;
- val = le32_to_cpu(val);
- memcpy(tp->fw_ver + i, &val, 4);
+ memcpy(tp->fw_ver + i, &v, 4);
}
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
tp->fw_ver[bcnt++] = ' ';
for (i = 0; i < 4; i++) {
- if (tg3_nvram_read(tp, offset, &val))
+ __le32 v;
+ if (tg3_nvram_read_le(tp, offset, &v))
return;
- val = le32_to_cpu(val);
- offset += sizeof(val);
+ offset += sizeof(v);
- if (bcnt > TG3_VER_SIZE - sizeof(val)) {
- memcpy(&tp->fw_ver[bcnt], &val, TG3_VER_SIZE - bcnt);
+ if (bcnt > TG3_VER_SIZE - sizeof(v)) {
+ memcpy(&tp->fw_ver[bcnt], &v, TG3_VER_SIZE - bcnt);
break;
}
- memcpy(&tp->fw_ver[bcnt], &val, sizeof(val));
- bcnt += sizeof(val);
+ memcpy(&tp->fw_ver[bcnt], &v, sizeof(v));
+ bcnt += sizeof(v);
}
tp->fw_ver[TG3_VER_SIZE - 1] = 0;
struct xl_private *xl_priv=netdev_priv(dev);
u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
u8 i ;
- u16 hwaddr[3] ; /* Should be u8[6] but we get word return values */
+ __le16 hwaddr[3] ; /* Should be u8[6] but we get word return values */
int open_err ;
u16 switchsettings, switchsettings_eeprom ;
}
/*
- * Read the information from the EEPROM that we need. I know we
- * should use ntohs, but the word gets stored reversed in the 16
- * bit field anyway and it all works its self out when we memcpy
- * it into dev->dev_addr.
+ * Read the information from the EEPROM that we need.
*/
- hwaddr[0] = xl_ee_read(dev,0x10) ;
- hwaddr[1] = xl_ee_read(dev,0x11) ;
- hwaddr[2] = xl_ee_read(dev,0x12) ;
+ hwaddr[0] = cpu_to_le16(xl_ee_read(dev,0x10));
+ hwaddr[1] = cpu_to_le16(xl_ee_read(dev,0x11));
+ hwaddr[2] = cpu_to_le16(xl_ee_read(dev,0x12));
/* Ring speed */
break ;
skb->dev = dev ;
- xl_priv->xl_rx_ring[i].upfragaddr = pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
- xl_priv->xl_rx_ring[i].upfraglen = xl_priv->pkt_buf_sz | RXUPLASTFRAG;
+ xl_priv->xl_rx_ring[i].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
+ xl_priv->xl_rx_ring[i].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
xl_priv->rx_ring_skb[i] = skb ;
}
xl_priv->rx_ring_tail = 0 ;
xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ;
for (i=0;i<(xl_priv->rx_ring_no-1);i++) {
- xl_priv->xl_rx_ring[i].upnextptr = xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1)) ;
+ xl_priv->xl_rx_ring[i].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1)));
}
xl_priv->xl_rx_ring[i].upnextptr = 0 ;
* Setup the first dummy DPD entry for polling to start working.
*/
- xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY ;
+ xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY;
xl_priv->xl_tx_ring[0].buffer = 0 ;
xl_priv->xl_tx_ring[0].buffer_length = 0 ;
xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
return open_err ;
} else {
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->asb = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ xl_priv->asb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ;
printk("ASB: %04x",xl_priv->asb ) ;
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- printk(", SRB: %04x",ntohs(readw(xl_mmio + MMIO_MACDATA)) ) ;
+ printk(", SRB: %04x",swab16(readw(xl_mmio + MMIO_MACDATA)) ) ;
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->arb = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
printk(", ARB: %04x \n",xl_priv->arb ) ;
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- vsoff = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
/*
* Interesting, sending the individual characters directly to printk was causing klogd to use
static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */
{
struct xl_private *xl_priv=netdev_priv(dev);
- int prev_ring_loc ;
-
- prev_ring_loc = (xl_priv->rx_ring_tail + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1);
- xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * xl_priv->rx_ring_tail) ;
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus = 0 ;
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upnextptr = 0 ;
- xl_priv->rx_ring_tail++ ;
- xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1) ;
-
- return ;
+ int n = xl_priv->rx_ring_tail;
+ int prev_ring_loc;
+
+ prev_ring_loc = (n + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1);
+ xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * n));
+ xl_priv->xl_rx_ring[n].framestatus = 0;
+ xl_priv->xl_rx_ring[n].upnextptr = 0;
+ xl_priv->rx_ring_tail++;
+ xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1);
}
static void xl_rx(struct net_device *dev)
temp_ring_loc &= (XL_RX_RING_SIZE-1) ;
}
- frame_length = xl_priv->xl_rx_ring[temp_ring_loc].framestatus & 0x7FFF ;
+ frame_length = le32_to_cpu(xl_priv->xl_rx_ring[temp_ring_loc].framestatus) & 0x7FFF;
skb = dev_alloc_skb(frame_length) ;
}
while (xl_priv->rx_ring_tail != temp_ring_loc) {
- copy_len = xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen & 0x7FFF ;
+ copy_len = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen) & 0x7FFF;
frame_length -= copy_len ;
- pci_dma_sync_single_for_cpu(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
skb_put(skb, copy_len),
copy_len);
- pci_dma_sync_single_for_device(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
adv_rx_ring(dev) ;
}
/* Now we have found the last fragment */
- pci_dma_sync_single_for_cpu(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
skb_put(skb,copy_len), frame_length);
/* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */
- pci_dma_sync_single_for_device(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
adv_rx_ring(dev) ;
skb->protocol = tr_type_trans(skb,dev) ;
netif_rx(skb) ;
} else { /* Single Descriptor Used, simply swap buffers over, fast path */
- frame_length = xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & 0x7FFF ;
+ frame_length = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus) & 0x7FFF;
skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
}
skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ;
- pci_unmap_single(xl_priv->pdev, xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr, xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+ pci_unmap_single(xl_priv->pdev, le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
skb_put(skb2, frame_length) ;
skb2->protocol = tr_type_trans(skb2,dev) ;
xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ;
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
- xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = xl_priv->pkt_buf_sz | RXUPLASTFRAG ;
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
+ xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
adv_rx_ring(dev) ;
xl_priv->xl_stats.rx_packets++ ;
xl_priv->xl_stats.rx_bytes += frame_length ;
for (i=0;i<XL_RX_RING_SIZE;i++) {
dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ;
- pci_unmap_single(xl_priv->pdev,xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE) ;
+ pci_unmap_single(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE);
xl_priv->rx_ring_tail++ ;
xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1;
}
txd = &(xl_priv->xl_tx_ring[tx_head]) ;
txd->dnnextptr = 0 ;
- txd->framestartheader = skb->len | TXDNINDICATE ;
- txd->buffer = pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE) ;
- txd->buffer_length = skb->len | TXDNFRAGLAST ;
+ txd->framestartheader = cpu_to_le32(skb->len) | TXDNINDICATE;
+ txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
+ txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST;
xl_priv->tx_ring_skb[tx_head] = skb ;
xl_priv->xl_stats.tx_packets++ ;
xl_priv->xl_stats.tx_bytes += skb->len ;
xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ;
xl_priv->free_ring_entries-- ;
- xl_priv->xl_tx_ring[tx_prev].dnnextptr = xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head) ;
+ xl_priv->xl_tx_ring[tx_prev].dnnextptr = cpu_to_le32(xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head));
/* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */
/* readl(xl_mmio + MMIO_DNLISTPTR) ; */
while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) {
txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ;
- pci_unmap_single(xl_priv->pdev,txd->buffer, xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE) ;
+ pci_unmap_single(xl_priv->pdev, le32_to_cpu(txd->buffer), xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE);
txd->framestartheader = 0 ;
- txd->buffer = 0xdeadbeef ;
+ txd->buffer = cpu_to_le32(0xdeadbeef);
txd->buffer_length = 0 ;
dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ;
xl_priv->tx_ring_tail++ ;
if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */
writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, ntohs(readw(xl_mmio + MMIO_MACDATA) )) ;
+ printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, swab16(readw(xl_mmio + MMIO_MACDATA) )) ;
- lan_status = ntohs(readw(xl_mmio + MMIO_MACDATA));
+ lan_status = swab16(readw(xl_mmio + MMIO_MACDATA));
/* Acknowledge interrupt, this tells nic we are done with the arb */
writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
printk(KERN_INFO "Received.Data \n") ;
#endif
writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- xl_priv->mac_buffer = ntohs(readw(xl_mmio + MMIO_MACDATA)) ;
+ xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
/* Now we are going to be really basic here and not do anything
* with the data at all. The tech docs do not give me enough
writeb(0x81, xl_mmio + MMIO_MACDATA) ;
writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
- writew(ntohs(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ;
+ writew(swab16(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ;
xl_wait_misr_flags(dev) ;
#define HOSTERRINT (1<<1)
/* Receive descriptor bits */
-#define RXOVERRUN (1<<19)
-#define RXFC (1<<21)
-#define RXAR (1<<22)
-#define RXUPDCOMPLETE (1<<23)
-#define RXUPDFULL (1<<24)
-#define RXUPLASTFRAG (1<<31)
+#define RXOVERRUN cpu_to_le32(1<<19)
+#define RXFC cpu_to_le32(1<<21)
+#define RXAR cpu_to_le32(1<<22)
+#define RXUPDCOMPLETE cpu_to_le32(1<<23)
+#define RXUPDFULL cpu_to_le32(1<<24)
+#define RXUPLASTFRAG cpu_to_le32(1<<31)
/* Transmit descriptor bits */
-#define TXDNCOMPLETE (1<<16)
-#define TXTXINDICATE (1<<27)
-#define TXDPDEMPTY (1<<29)
-#define TXDNINDICATE (1<<31)
-#define TXDNFRAGLAST (1<<31)
+#define TXDNCOMPLETE cpu_to_le32(1<<16)
+#define TXTXINDICATE cpu_to_le32(1<<27)
+#define TXDPDEMPTY cpu_to_le32(1<<29)
+#define TXDNINDICATE cpu_to_le32(1<<31)
+#define TXDNFRAGLAST cpu_to_le32(1<<31)
/* Interrupts to Acknowledge */
#define LATCH_ACK 1
/* 3c359 data structures */
struct xl_tx_desc {
- u32 dnnextptr ;
- u32 framestartheader ;
- u32 buffer ;
- u32 buffer_length ;
+ __le32 dnnextptr;
+ __le32 framestartheader;
+ __le32 buffer;
+ __le32 buffer_length;
};
struct xl_rx_desc {
- u32 upnextptr ;
- u32 framestatus ;
- u32 upfragaddr ;
- u32 upfraglen ;
+ __le32 upnextptr;
+ __le32 framestatus;
+ __le32 upfragaddr;
+ __le32 upfraglen;
};
struct xl_private {
first_txd->flags = TYPHOON_TX_DESC | TYPHOON_DESC_VALID;
first_txd->numDesc = 0;
first_txd->len = 0;
- first_txd->addr = (u64)((unsigned long) skb) & 0xffffffff;
- first_txd->addrHi = (u64)((unsigned long) skb) >> 32;
+ first_txd->tx_addr = (u64)((unsigned long) skb);
first_txd->processFlags = 0;
if(skb->ip_summed == CHECKSUM_PARTIAL) {
PCI_DMA_TODEVICE);
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
txd->len = cpu_to_le16(skb->len);
- txd->addr = cpu_to_le32(skb_dma);
- txd->addrHi = 0;
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
first_txd->numDesc++;
} else {
int i, len;
PCI_DMA_TODEVICE);
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
txd->len = cpu_to_le16(len);
- txd->addr = cpu_to_le32(skb_dma);
- txd->addrHi = 0;
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
first_txd->numDesc++;
for(i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
PCI_DMA_TODEVICE);
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
txd->len = cpu_to_le16(len);
- txd->addr = cpu_to_le32(skb_dma);
- txd->addrHi = 0;
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
first_txd->numDesc++;
}
}
* ethtool_ops->get_{strings,stats}()
*/
stats->tx_packets = le32_to_cpu(s->txPackets);
- stats->tx_bytes = le32_to_cpu(s->txBytes);
+ stats->tx_bytes = le64_to_cpu(s->txBytes);
stats->tx_errors = le32_to_cpu(s->txCarrierLost);
stats->tx_carrier_errors = le32_to_cpu(s->txCarrierLost);
stats->collisions = le32_to_cpu(s->txMultipleCollisions);
stats->rx_packets = le32_to_cpu(s->rxPacketsGood);
- stats->rx_bytes = le32_to_cpu(s->rxBytesGood);
+ stats->rx_bytes = le64_to_cpu(s->rxBytesGood);
stats->rx_fifo_errors = le32_to_cpu(s->rxFifoOverruns);
stats->rx_errors = le32_to_cpu(s->rxFifoOverruns) +
le32_to_cpu(s->BadSSD) + le32_to_cpu(s->rxCrcErrors);
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
strcpy(info->fw_version, "Unknown runtime");
} else {
- u32 sleep_ver = xp_resp[0].parm2;
+ u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
snprintf(info->fw_version, 32, "%02x.%03x.%03x",
sleep_ver >> 24, (sleep_ver >> 12) & 0xfff,
sleep_ver & 0xfff);
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT);
- xp_cmd.parm1 = cpu_to_le16(xcvr);
+ xp_cmd.parm1 = xcvr;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0)
goto out;
tp->txLoRing.writeRegister = TYPHOON_REG_TX_LO_READY;
tp->txHiRing.writeRegister = TYPHOON_REG_TX_HI_READY;
- tp->txlo_dma_addr = iface->txLoAddr;
+ tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
tp->card_state = Sleeping;
smp_wmb();
u8 *image_data;
void *dpage;
dma_addr_t dpage_dma;
- unsigned int csum;
+ __sum16 csum;
u32 irqEnabled;
u32 irqMasked;
u32 numSections;
* summing. Fortunately, due to the properties of
* the checksum, we can do this once, at the end.
*/
- csum = csum_partial_copy_nocheck(image_data, dpage,
- len, 0);
- csum = csum_fold(csum);
- csum = le16_to_cpu(csum);
+ csum = csum_fold(csum_partial_copy_nocheck(image_data,
+ dpage, len,
+ 0));
iowrite32(len, ioaddr + TYPHOON_REG_BOOT_LENGTH);
- iowrite32(csum, ioaddr + TYPHOON_REG_BOOT_CHECKSUM);
+ iowrite32(le16_to_cpu((__force __le16)csum),
+ ioaddr + TYPHOON_REG_BOOT_CHECKSUM);
iowrite32(load_addr,
ioaddr + TYPHOON_REG_BOOT_DEST_ADDR);
iowrite32(0, ioaddr + TYPHOON_REG_BOOT_DATA_HI);
if(type == TYPHOON_TX_DESC) {
/* This tx_desc describes a packet.
*/
- unsigned long ptr = tx->addr | ((u64)tx->addrHi << 32);
+ unsigned long ptr = tx->tx_addr;
struct sk_buff *skb = (struct sk_buff *) ptr;
dev_kfree_skb_irq(skb);
} else if(type == TYPHOON_FRAG_DESC) {
/* This tx_desc describes a memory mapping. Free it.
*/
- skb_dma = (dma_addr_t) le32_to_cpu(tx->addr);
+ skb_dma = (dma_addr_t) le32_to_cpu(tx->frag.addr);
dma_len = le16_to_cpu(tx->len);
pci_unmap_single(tp->pdev, skb_dma, dma_len,
PCI_DMA_TODEVICE);
struct rx_free *r;
if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
- indexes->rxBuffCleared) {
+ le32_to_cpu(indexes->rxBuffCleared)) {
/* no room in ring, just drop the skb
*/
dev_kfree_skb_any(rxb->skb);
rxb->skb = NULL;
if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
- indexes->rxBuffCleared)
+ le32_to_cpu(indexes->rxBuffCleared))
return -ENOMEM;
skb = dev_alloc_skb(PKT_BUF_SZ);
volatile __le32 txLoCleared;
volatile __le32 txHiCleared;
volatile __le32 rxLoReady;
- volatile __u32 rxBuffCleared; /* AV: really? */
+ volatile __le32 rxBuffCleared;
volatile __le32 cmdCleared;
volatile __le32 respReady;
volatile __le32 rxHiReady;
#define TYPHOON_DESC_VALID 0x80
u8 numDesc;
__le16 len;
- u32 addr;
- u32 addrHi;
+ union {
+ struct {
+ __le32 addr;
+ __le32 addrHi;
+ } frag;
+ u64 tx_addr; /* opaque for hardware, for TX_DESC */
+ };
__le32 processFlags;
#define TYPHOON_TX_PF_NO_CRC __constant_cpu_to_le32(0x00000001)
#define TYPHOON_TX_PF_IP_CHKSUM __constant_cpu_to_le32(0x00000002)
u8 flags;
u8 numDesc;
__le16 frameLen;
- u32 addr;
- u32 addrHi;
+ u32 addr; /* opaque, comes from virtAddr */
+ u32 addrHi; /* opaque, comes from virtAddrHi */
__le32 rxStatus;
#define TYPHOON_RX_ERR_INTERNAL __constant_cpu_to_le32(0x00000000)
#define TYPHOON_RX_ERR_FIFO_UNDERRUN __constant_cpu_to_le32(0x00000001)
u16 length, howmany = 0;
u32 bd_status;
u8 *bdBuffer;
- struct net_device * dev;
+ struct net_device *dev;
ugeth_vdbg("%s: IN", __FUNCTION__);
int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int __init uec_mdio_init(void);
-void __exit uec_mdio_exit(void);
+void uec_mdio_exit(void);
#endif /* __UEC_MII_H */
};
struct ax88172_int_data {
- u16 res1;
+ __le16 res1;
u8 link;
- u16 res2;
+ __le16 res2;
u8 status;
- u16 res3;
+ __le16 res3;
} __attribute__ ((packed));
static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
+ void *buf;
+ int err = -ENOMEM;
+
devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
cmd, value, index, size);
- return usb_control_msg(
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ goto out;
+
+ err = usb_control_msg(
dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
cmd,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value,
index,
- data,
+ buf,
size,
USB_CTRL_GET_TIMEOUT);
+ if (err >= 0 && err < size)
+ err = -EINVAL;
+ if (!err)
+ memcpy(data, buf, size);
+ kfree(buf);
+
+out:
+ return err;
}
static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
+ void *buf = NULL;
+ int err = -ENOMEM;
+
devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
cmd, value, index, size);
- return usb_control_msg(
+
+ if (data) {
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ goto out;
+ memcpy(buf, data, size);
+ }
+
+ err = usb_control_msg(
dev->udev,
usb_sndctrlpipe(dev->udev, 0),
cmd,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value,
index,
- data,
+ buf,
size,
USB_CTRL_SET_TIMEOUT);
+ kfree(buf);
+
+out:
+ return err;
}
static void asix_async_cmd_callback(struct urb *urb)
static inline int asix_get_phy_addr(struct usbnet *dev)
{
- int ret = 0;
- void *buf;
+ u8 buf[2];
+ int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
devdbg(dev, "asix_get_phy_addr()");
- buf = kmalloc(2, GFP_KERNEL);
- if (!buf)
- goto out1;
-
- if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
- 0, 0, 2, buf)) < 2) {
+ if (ret < 0) {
deverr(dev, "Error reading PHYID register: %02x", ret);
- goto out2;
+ goto out;
}
- devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((u16 *)buf));
- ret = *((u8 *)buf + 1);
-out2:
- kfree(buf);
-out1:
+ devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((__le16 *)buf));
+ ret = buf[1];
+
+out:
return ret;
}
static u16 asix_read_rx_ctl(struct usbnet *dev)
{
- u16 ret = 0;
- void *buf;
-
- buf = kmalloc(2, GFP_KERNEL);
- if (!buf)
- goto out1;
+ __le16 v;
+ int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
- if ((ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL,
- 0, 0, 2, buf)) < 2) {
+ if (ret < 0) {
deverr(dev, "Error reading RX_CTL register: %02x", ret);
- goto out2;
+ goto out;
}
- ret = le16_to_cpu(*((u16 *)buf));
-out2:
- kfree(buf);
-out1:
+ ret = le16_to_cpu(v);
+out:
return ret;
}
static u16 asix_read_medium_status(struct usbnet *dev)
{
- u16 ret = 0;
- void *buf;
+ __le16 v;
+ int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
- buf = kmalloc(2, GFP_KERNEL);
- if (!buf)
- goto out1;
-
- if ((ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
- 0, 0, 2, buf)) < 2) {
+ if (ret < 0) {
deverr(dev, "Error reading Medium Status register: %02x", ret);
- goto out2;
+ goto out;
}
- ret = le16_to_cpu(*((u16 *)buf));
-out2:
- kfree(buf);
-out1:
+ ret = le16_to_cpu(v);
+out:
return ret;
}
static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
- u16 res;
+ __le16 res;
mutex_lock(&dev->phy_mutex);
asix_set_sw_mii(dev);
asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, (u16 *)&res);
+ (__u16)loc, 2, &res);
asix_set_hw_mii(dev);
mutex_unlock(&dev->phy_mutex);
- devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res & 0xffff));
+ devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res));
- return le16_to_cpu(res & 0xffff);
+ return le16_to_cpu(res);
}
static void
asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
{
struct usbnet *dev = netdev_priv(netdev);
- u16 res = cpu_to_le16(val);
+ __le16 res = cpu_to_le16(val);
devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
mutex_lock(&dev->phy_mutex);
asix_set_sw_mii(dev);
- asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
- (__u16)loc, 2, (u16 *)&res);
+ asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
asix_set_hw_mii(dev);
mutex_unlock(&dev->phy_mutex);
}
{
struct usbnet *dev = netdev_priv(net);
u8 opt = 0;
- u8 buf[1];
if (wolinfo->wolopts & WAKE_PHY)
opt |= AX_MONITOR_LINK;
opt |= AX_MONITOR_MODE;
if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
- opt, 0, 0, &buf) < 0)
+ opt, 0, 0, NULL) < 0)
return -EINVAL;
return 0;
struct ethtool_eeprom *eeprom, u8 *data)
{
struct usbnet *dev = netdev_priv(net);
- u16 *ebuf = (u16 *)data;
+ __le16 *ebuf = (__le16 *)data;
int i;
/* Crude hack to ensure that we don't overwrite memory
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret = 0;
- void *buf;
+ u8 buf[ETH_ALEN];
int i;
unsigned long gpio_bits = dev->driver_info->data;
struct asix_data *data = (struct asix_data *)&dev->data;
usbnet_get_endpoints(dev,intf);
- buf = kmalloc(ETH_ALEN, GFP_KERNEL);
- if(!buf) {
- ret = -ENOMEM;
- goto out1;
- }
-
/* Toggle the GPIOs in a manufacturer/model specific way */
for (i = 2; i >= 0; i--) {
if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
(gpio_bits >> (i * 8)) & 0xff, 0, 0,
- buf)) < 0)
- goto out2;
+ NULL)) < 0)
+ goto out;
msleep(5);
}
if ((ret = asix_write_rx_ctl(dev, 0x80)) < 0)
- goto out2;
+ goto out;
/* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
if ((ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
- 0, 0, 6, buf)) < 0) {
+ 0, 0, ETH_ALEN, buf)) < 0) {
dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
- goto out2;
+ goto out;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
mii_nway_restart(&dev->mii);
return 0;
-out2:
- kfree(buf);
-out1:
+
+out:
return ret;
}
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret, embd_phy;
- void *buf;
u16 rx_ctl;
struct asix_data *data = (struct asix_data *)&dev->data;
+ u8 buf[ETH_ALEN];
u32 phyid;
data->eeprom_len = AX88772_EEPROM_LEN;
usbnet_get_endpoints(dev,intf);
- buf = kmalloc(6, GFP_KERNEL);
- if(!buf) {
- dbg ("Cannot allocate memory for buffer");
- ret = -ENOMEM;
- goto out1;
- }
-
if ((ret = asix_write_gpio(dev,
AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
- goto out2;
+ goto out;
/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
- embd_phy, 0, 0, buf)) < 0) {
+ embd_phy, 0, 0, NULL)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
- goto out2;
+ goto out;
}
if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
- goto out2;
+ goto out;
msleep(150);
if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
- goto out2;
+ goto out;
msleep(150);
if (embd_phy) {
if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
- goto out2;
+ goto out;
}
else {
if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
- goto out2;
+ goto out;
}
msleep(150);
rx_ctl = asix_read_rx_ctl(dev);
dbg("RX_CTL is 0x%04x after software reset", rx_ctl);
if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0)
- goto out2;
+ goto out;
rx_ctl = asix_read_rx_ctl(dev);
dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
/* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
0, 0, ETH_ALEN, buf)) < 0) {
dbg("Failed to read MAC address: %d", ret);
- goto out2;
+ goto out;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
dbg("PHYID=0x%08x", phyid);
if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
- goto out2;
+ goto out;
msleep(150);
if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
- goto out2;
+ goto out;
msleep(150);
mii_nway_restart(&dev->mii);
if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0)
- goto out2;
+ goto out;
if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
- AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
+ AX88772_IPG2_DEFAULT, 0, NULL)) < 0) {
dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
- goto out2;
+ goto out;
}
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
- goto out2;
+ goto out;
rx_ctl = asix_read_rx_ctl(dev);
dbg("RX_CTL is 0x%04x after all initializations", rx_ctl);
rx_ctl = asix_read_medium_status(dev);
dbg("Medium Status is 0x%04x after all initializations", rx_ctl);
- kfree(buf);
-
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
/* hard_mtu is still the default - the device does not support
jumbo eth frames */
dev->rx_urb_size = 2048;
}
-
return 0;
-out2:
- kfree(buf);
-out1:
+out:
return ret;
}
{
struct asix_data *data = (struct asix_data *)&dev->data;
int ret;
- void *buf;
- u16 eeprom;
+ u8 buf[ETH_ALEN];
+ __le16 eeprom;
+ u8 status;
int gpio0 = 0;
u32 phyid;
usbnet_get_endpoints(dev,intf);
- buf = kmalloc(6, GFP_KERNEL);
- if(!buf) {
- dbg ("Cannot allocate memory for buffer");
- ret = -ENOMEM;
- goto out1;
- }
-
- eeprom = 0;
- asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &eeprom);
- dbg("GPIO Status: 0x%04x", eeprom);
+ asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+ dbg("GPIO Status: 0x%04x", status);
asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
dbg("EEPROM index 0x17 is 0x%04x", eeprom);
- if (eeprom == 0xffff) {
+ if (eeprom == cpu_to_le16(0xffff)) {
data->phymode = PHY_MODE_MARVELL;
data->ledmode = 0;
gpio0 = 1;
} else {
- data->phymode = eeprom & 7;
- data->ledmode = eeprom >> 8;
- gpio0 = (eeprom & 0x80) ? 0 : 1;
+ data->phymode = le16_to_cpu(eeprom) & 7;
+ data->ledmode = le16_to_cpu(eeprom) >> 8;
+ gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
}
dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
- if ((eeprom >> 8) != 1) {
+ if ((le16_to_cpu(eeprom) >> 8) != 1) {
asix_write_gpio(dev, 0x003c, 30);
asix_write_gpio(dev, 0x001c, 300);
asix_write_gpio(dev, 0x003c, 30);
asix_write_rx_ctl(dev, 0);
/* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
0, 0, ETH_ALEN, buf)) < 0) {
dbg("Failed to read MAC address: %d", ret);
- goto out2;
+ goto out;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
mii_nway_restart(&dev->mii);
if ((ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT)) < 0)
- goto out2;
+ goto out;
if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
- goto out2;
-
- kfree(buf);
+ goto out;
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
jumbo eth frames */
dev->rx_urb_size = 2048;
}
-
return 0;
-out2:
- kfree(buf);
-out1:
+out:
return ret;
}
dev->addr_len = 0; /* hardware address length */
if (!chan->svc)
- *(u16*)dev->dev_addr = htons(chan->lcn);
+ *(__be16*)dev->dev_addr = htons(chan->lcn);
/* Initialize hardware parameters (just for reference) */
dev->irq = wandev->irq;
const void *daddr, const void *saddr,
unsigned len)
{
- skb->protocol = type;
+ skb->protocol = htons(type);
return dev->hard_header_len;
}
struct cycx_device *card = chan->card;
if (!chan->svc)
- chan->protocol = skb->protocol;
+ chan->protocol = ntohs(skb->protocol);
if (card->wandev.state != WAN_CONNECTED)
++chan->ifstats.tx_dropped;
else if (chan->svc && chan->protocol &&
- chan->protocol != skb->protocol) {
+ chan->protocol != ntohs(skb->protocol)) {
printk(KERN_INFO
"%s: unsupported Ethertype 0x%04X on interface %s!\n",
- card->devname, skb->protocol, dev->name);
+ card->devname, ntohs(skb->protocol), dev->name);
++chan->ifstats.tx_errors;
} else if (chan->protocol == ETH_P_IP) {
switch (chan->state) {
switch (state) {
case WAN_CONNECTED:
string_state = "connected!";
- *(u16*)dev->dev_addr = htons(chan->lcn);
+ *(__be16*)dev->dev_addr = htons(chan->lcn);
netif_wake_queue(dev);
reset_timer(dev);
struct ppp_header {
u8 address;
u8 control;
- u16 protocol;
+ __be16 protocol;
};
#define PPP_HEADER_LEN sizeof (struct ppp_header)
struct lcp_header {
u8 type;
u8 ident;
- u16 len;
+ __be16 len;
};
#define LCP_HEADER_LEN sizeof (struct lcp_header)
struct cisco_packet {
- u32 type;
- u32 par1;
- u32 par2;
- u16 rel;
- u16 time0;
- u16 time1;
+ __be32 type;
+ __be32 par1;
+ __be32 par2;
+ __be16 rel;
+ __be16 time0;
+ __be16 time1;
};
#define CISCO_PACKET_LEN 18
#define CISCO_BIG_PACKET_LEN 20
static void sppp_keepalive (unsigned long dummy);
static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type,
u8 ident, u16 len, void *data);
-static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2);
+static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2);
static void sppp_lcp_input (struct sppp *sp, struct sk_buff *m);
static void sppp_cisco_input (struct sppp *sp, struct sk_buff *m);
static void sppp_ipcp_input (struct sppp *sp, struct sk_buff *m);
sppp_cisco_send (sp, CISCO_KEEPALIVE_REQ, ++sp->pp_seq,
sp->pp_rseq);
else if (sp->lcp.state == LCP_STATE_OPENED) {
- long nmagic = htonl (sp->lcp.magic);
+ __be32 nmagic = htonl (sp->lcp.magic);
sp->lcp.echoid = ++sp->pp_seq;
sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REQ,
sp->lcp.echoid, 4, &nmagic);
dev->name, len);
break;
}
- if (ntohl (*(long*)(h+1)) == sp->lcp.magic) {
+ if (ntohl (*(__be32*)(h+1)) == sp->lcp.magic) {
/* Line loopback mode detected. */
printk (KERN_WARNING "%s: loopback\n", dev->name);
if_down (dev);
sppp_lcp_open (sp);
break;
}
- *(long*)(h+1) = htonl (sp->lcp.magic);
+ *(__be32 *)(h+1) = htonl (sp->lcp.magic);
sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REPLY, h->ident, len-4, h+1);
break;
case LCP_ECHO_REPLY:
dev->name, len);
break;
}
- if (ntohl (*(long*)(h+1)) != sp->lcp.magic)
+ if (ntohl(*(__be32 *)(h+1)) != sp->lcp.magic)
sp->pp_alivecnt = 0;
break;
}
{
struct in_device *in_dev;
struct in_ifaddr *ifa;
- __be32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */
+ __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */
#ifdef CONFIG_INET
rcu_read_lock();
if ((in_dev = __in_dev_get_rcu(dev)) != NULL)
}
rcu_read_unlock();
#endif
- /* I hope both addr and mask are in the net order */
- sppp_cisco_send (sp, CISCO_ADDR_REPLY, addr, mask);
+ sppp_cisco_send (sp, CISCO_ADDR_REPLY, ntohl(addr), ntohl(mask));
break;
}
}
* Send Cisco keepalive packet.
*/
-static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2)
+static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2)
{
struct ppp_header *h;
struct cisco_packet *ch;
ch->type = htonl (type);
ch->par1 = htonl (par1);
ch->par2 = htonl (par2);
- ch->rel = -1;
+ ch->rel = htons(0xffff);
ch->time0 = htons ((u16) (t >> 16));
ch->time1 = htons ((u16) t);
config LIBERTAS
tristate "Marvell 8xxx Libertas WLAN driver support"
depends on WLAN_80211
+ select WIRELESS_EXT
select IEEE80211
select FW_LOADER
---help---
b43_register_led(dev, &dev->led_radio, name,
b43_rfkill_led_name(dev),
led_index, activelow);
+ /* Sync the RF-kill LED state with the switch state. */
+ if (dev->radio_hw_enable)
+ b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
case B43_LED_ASSOC:
b43_unregister_led(&dev->led_tx);
b43_unregister_led(&dev->led_rx);
b43_unregister_led(&dev->led_assoc);
+ b43_unregister_led(&dev->led_radio);
}
static void b43_chip_exit(struct b43_wldev *dev)
{
b43_radio_turn_off(dev, 1);
- b43_leds_exit(dev);
b43_gpio_cleanup(dev);
/* firmware is released later */
}
err = b43_gpio_init(dev);
if (err)
goto out; /* firmware is released later */
- b43_leds_init(dev);
err = b43_upload_initvals(dev);
if (err)
- goto err_leds_exit;
+ goto err_gpio_clean;
b43_radio_turn_on(dev);
b43_write16(dev, 0x03E6, 0x0000);
err_radio_off:
b43_radio_turn_off(dev, 1);
-err_leds_exit:
- b43_leds_exit(dev);
+err_gpio_clean:
b43_gpio_cleanup(dev);
return err;
}
return;
b43_set_status(dev, B43_STAT_UNINIT);
- mutex_unlock(&dev->wl->mutex);
- b43_rfkill_exit(dev);
- mutex_lock(&dev->wl->mutex);
-
+ b43_leds_exit(dev);
b43_rng_exit(dev->wl);
b43_pio_free(dev);
b43_dma_free(dev);
memset(wl->mac_addr, 0, ETH_ALEN);
b43_upload_card_macaddress(dev);
b43_security_init(dev);
- b43_rfkill_init(dev);
b43_rng_init(wl);
b43_set_status(dev, B43_STAT_INITIALIZED);
- out:
+ b43_leds_init(dev);
+out:
return err;
err_chip_exit:
int did_init = 0;
int err = 0;
+ /* First register RFkill.
+ * LEDs that are registered later depend on it. */
+ b43_rfkill_init(dev);
+
mutex_lock(&wl->mutex);
if (b43_status(dev) < B43_STAT_INITIALIZED) {
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
+ b43_rfkill_exit(dev);
+
mutex_lock(&wl->mutex);
if (b43_status(dev) >= B43_STAT_STARTED)
b43_wireless_core_stop(dev);
#include "rfkill.h"
#include "b43.h"
+#include <linux/kmod.h>
+
/* Returns TRUE, if the radio is enabled in hardware. */
static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
bool report_change = 0;
mutex_lock(&wl->mutex);
- B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
+ if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
+ mutex_unlock(&wl->mutex);
+ return;
+ }
enabled = b43_is_hw_radio_enabled(dev);
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
}
mutex_unlock(&wl->mutex);
- if (unlikely(report_change))
- input_report_key(poll_dev->input, KEY_WLAN, enabled);
+ /* send the radio switch event to the system - note both a key press
+ * and a release are required */
+ if (unlikely(report_change)) {
+ input_report_key(poll_dev->input, KEY_WLAN, 1);
+ input_report_key(poll_dev->input, KEY_WLAN, 0);
+ }
}
/* Called when the RFKILL toggled in software. */
{
struct b43_wldev *dev = data;
struct b43_wl *wl = dev->wl;
- int err = 0;
+ int err = -EBUSY;
if (!wl->rfkill.registered)
return 0;
mutex_lock(&wl->mutex);
- B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
+ if (b43_status(dev) < B43_STAT_INITIALIZED)
+ goto out_unlock;
+ err = 0;
switch (state) {
case RFKILL_STATE_ON:
if (!dev->radio_hw_enable) {
rfk->poll_dev->poll = b43_rfkill_poll;
rfk->poll_dev->poll_interval = 1000; /* msecs */
+ rfk->poll_dev->input->name = rfk->name;
+ rfk->poll_dev->input->id.bustype = BUS_HOST;
+ rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
+ rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
+
err = rfkill_register(rfk->rfkill);
if (err)
goto err_free_polldev;
+
+#ifdef CONFIG_RFKILL_INPUT_MODULE
+ /* B43 RF-kill isn't useful without the rfkill-input subsystem.
+ * Try to load the module. */
+ err = request_module("rfkill-input");
+ if (err)
+ b43warn(wl, "Failed to load the rfkill-input module. "
+ "The built-in radio LED will not work.\n");
+#endif /* CONFIG_RFKILL_INPUT */
+
err = input_register_polled_device(rfk->poll_dev);
if (err)
goto err_unreg_rfk;
ssize_t buf_size;
ssize_t res;
unsigned long flags;
- u64 tsf;
+ unsigned long long tsf;
buf_size = min(count, sizeof (really_big_buffer) - 1);
down(&big_buffer_sem);
mutex_unlock(&priv->mutex);
}
-static int ipw_setup_deferred_work(struct ipw_priv *priv)
+static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv)
{
int ret = 0;
#endif
-static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit ipw_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
int err = 0;
struct net_device *net_dev;
return err;
}
-static void ipw_pci_remove(struct pci_dev *pdev)
+static void __devexit ipw_pci_remove(struct pci_dev *pdev)
{
struct ipw_priv *priv = pci_get_drvdata(pdev);
struct list_head *p, *q;
* when we loaded driver, and is now set to "enable".
* After we're Alive, RF_KILL gets handled by
* iwl_rx_card_state_notif() */
- if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status))
+ if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
queue_work(priv->workqueue, &priv->restart);
+ }
handled |= CSR_INT_BIT_RF_KILL;
}
mutex_lock(&priv->mutex);
if (rc) {
+ iwl_rate_control_unregister(priv->hw);
IWL_ERROR("Failed to register network "
"device (error %d)\n", rc);
return;
* when we loaded driver, and is now set to "enable".
* After we're Alive, RF_KILL gets handled by
* iwl_rx_card_state_notif() */
- if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status))
+ if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
queue_work(priv->workqueue, &priv->restart);
+ }
handled |= CSR_INT_BIT_RF_KILL;
}
mutex_lock(&priv->mutex);
if (rc) {
+ iwl_rate_control_unregister(priv->hw);
IWL_ERROR("Failed to register network "
"device (error %d)\n", rc);
return;
__skb_trim(skb, skb->len -
(IEEE80211_FCS_LEN + sizeof(struct rx_status)));
+ ZD_ASSERT(IS_ALIGNED((unsigned long)skb->data, 4));
+
update_qual_rssi(mac, skb->data, skb->len, stats.signal,
status->signal_strength);
int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length)
{
struct sk_buff *skb;
+ unsigned int reserved =
+ ALIGN(max_t(unsigned int,
+ sizeof(struct zd_rt_hdr), ZD_PLCP_HEADER_SIZE), 4) -
+ ZD_PLCP_HEADER_SIZE;
- skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
+ skb = dev_alloc_skb(reserved + length);
if (!skb) {
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n");
ieee->stats.rx_dropped++;
return -ENOMEM;
}
- skb_reserve(skb, sizeof(struct zd_rt_hdr));
+ skb_reserve(skb, reserved);
memcpy(__skb_put(skb, length), buffer, length);
skb_queue_tail(&mac->rx_queue, skb);
tasklet_schedule(&mac->rx_tasklet);
/* The Yellowfin Rx and Tx buffer descriptors.
Elements are written as 32 bit for endian portability. */
struct yellowfin_desc {
- u32 dbdma_cmd;
- u32 addr;
- u32 branch_addr;
- u32 result_status;
+ __le32 dbdma_cmd;
+ __le32 addr;
+ __le32 branch_addr;
+ __le32 result_status;
};
struct tx_status_words {
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
/* Free the original skb. */
- pci_unmap_single(yp->pci_dev, yp->tx_ring[entry].addr,
+ pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
yp->tx_skbuff[entry] = NULL;
if(!desc->result_status)
break;
- pci_dma_sync_single_for_cpu(yp->pci_dev, desc->addr,
+ pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
desc_status = le32_to_cpu(desc->result_status) >> 16;
buf_addr = rx_skb->data;
data_size = (le32_to_cpu(desc->dbdma_cmd) -
le32_to_cpu(desc->result_status)) & 0xffff;
- frame_status = le16_to_cpu(get_unaligned((s16*)&(buf_addr[data_size - 2])));
+ frame_status = le16_to_cpu(get_unaligned((__le16*)&(buf_addr[data_size - 2])));
if (yellowfin_debug > 4)
printk(KERN_DEBUG " yellowfin_rx() status was %4.4x.\n",
frame_status);
if (pkt_len > rx_copybreak) {
skb_put(skb = rx_skb, pkt_len);
pci_unmap_single(yp->pci_dev,
- yp->rx_ring[entry].addr,
+ le32_to_cpu(yp->rx_ring[entry].addr),
yp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
yp->rx_skbuff[entry] = NULL;
skb_reserve(skb, 2); /* 16 byte align the IP header */
skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
skb_put(skb, pkt_len);
- pci_dma_sync_single_for_device(yp->pci_dev, desc->addr,
- yp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
+ pci_dma_sync_single_for_device(yp->pci_dev,
+ le32_to_cpu(desc->addr),
+ yp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
- yp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */
+ yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
if (yp->rx_skbuff[i]) {
dev_kfree_skb(yp->rx_skbuff[i]);
}
{
.procname = "timeslice",
.data = NULL,
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void*) &parport_min_timeslice_value,
sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
if (sz) {
res->flags = (l & IORESOURCE_ROM_ENABLE) |
- IORESOURCE_MEM | IORESOURCE_READONLY;
+ IORESOURCE_MEM | IORESOURCE_PREFETCH |
+ IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
res->start = l & PCI_ROM_ADDRESS_MASK;
res->end = res->start + (unsigned long) sz;
}
goto out;
}
- ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
- if (ret) {
- dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
- goto out;
- }
-
rtc->irq = irq;
rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
if (!rtc->regs) {
ret = -ENOMEM;
dev_dbg(&pdev->dev, "could not map I/O memory\n");
- goto out_free_irq;
+ goto out;
}
spin_lock_init(&rtc->lock);
| RTC_BIT(CTRL_EN));
}
+ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
+ if (ret) {
+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
+ goto out_iounmap;
+ }
+
rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
&at32_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc)) {
dev_dbg(&pdev->dev, "could not register rtc device\n");
ret = PTR_ERR(rtc->rtc);
- goto out_iounmap;
+ goto out_free_irq;
}
platform_set_drvdata(pdev, rtc);
return 0;
-out_iounmap:
- iounmap(rtc->regs);
out_free_irq:
free_irq(irq, rtc);
+out_iounmap:
+ iounmap(rtc->regs);
out:
kfree(rtc);
return ret;
skb->dev = pskb->dev;
skb->protocol = pskb->protocol;
pskb->ip_summed = CHECKSUM_UNNECESSARY;
- netif_rx_ni(skb);
/**
- * Successful rx; reset logflags
+ * reset logflags
*/
ch->logflags = 0;
- dev->last_rx = jiffies;
privptr->stats.rx_packets++;
privptr->stats.rx_bytes += skb->len;
+ netif_rx_ni(skb);
+ dev->last_rx = jiffies;
if (len > 0) {
skb_pull(pskb, header->length);
if (skb_tailroom(pskb) < LL_HEADER_LENGTH) {
skb->dev = pskb->dev;
skb->protocol = pskb->protocol;
pskb->ip_summed = CHECKSUM_UNNECESSARY;
+ privptr->stats.rx_packets++;
+ privptr->stats.rx_bytes += skb->len;
/*
* Since receiving is always initiated from a tasklet (in iucv.c),
* we must use netif_rx_ni() instead of netif_rx()
*/
netif_rx_ni(skb);
dev->last_rx = jiffies;
- privptr->stats.rx_packets++;
- privptr->stats.rx_bytes += skb->len;
skb_pull(pskb, header->next);
skb_put(pskb, NETIUCV_HDRLEN);
}
};
static struct wd_device wd_dev = {
- 0, SPIN_LOCK_UNLOCKED, 0, 0, 0, 0,
+ 0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0,
};
static struct timer_list wd_timer;
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
- pci_set_dma_mask(pDev, DMA_32BIT_MASK))
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;
base_addr0_phys = pci_resource_start(pDev,0);
}
}
+static void ide_scsi_hex_dump(u8 *data, int len)
+{
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+}
+
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c,
- 6, 0);
+ ide_scsi_hex_dump(pc->c, 6);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->buffer, 16, 0);
+ ide_scsi_hex_dump(pc->buffer, 16);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- cmd->cmnd, cmd->cmd_len, 0);
+ ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->c, 12, 0);
+ ide_scsi_hex_dump(pc->c, 12);
}
}
scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
total_len += sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
+ ++sg;
}
cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
}
host = (struct initio_host *)shost->hostdata;
memset(host, 0, sizeof(struct initio_host));
+ host->addr = pci_resource_start(pdev, 0);
if (!request_region(host->addr, 256, "i91u")) {
printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
tb->dma = need_dma;
tb->buffer_size = got;
+ sg_init_table(tb->sg, max_sg);
return tb;
}
* Free O/S specific resources.
*/
if (pdev->irq)
- free_irq(pdev->irq, np);
+ free_irq(pdev->irq, np->s.host);
if (np->s.ioaddr)
pci_iounmap(pdev, np->s.ioaddr);
if (np->s.ramaddr)
istat = INB(np, nc_istat);
if (istat & INTF) {
OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem);
- istat = INB(np, nc_istat); /* DUMMY READ */
+ istat |= INB(np, nc_istat); /* DUMMY READ */
if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
sym_wakeup_done(np);
}
#include "suncore.h"
-int sunserial_current_minor = 64;
+static int sunserial_current_minor = 64;
-EXPORT_SYMBOL(sunserial_current_minor);
+int sunserial_register_minors(struct uart_driver *drv, int count)
+{
+ int err = 0;
+
+ drv->minor = sunserial_current_minor;
+ drv->nr += count;
+ /* Register the driver on the first call */
+ if (drv->nr == count)
+ err = uart_register_driver(drv);
+ if (err == 0) {
+ sunserial_current_minor += count;
+ drv->tty_driver->name_base = drv->minor - 64;
+ }
+ return err;
+}
+EXPORT_SYMBOL(sunserial_register_minors);
+
+void sunserial_unregister_minors(struct uart_driver *drv, int count)
+{
+ drv->nr -= count;
+ sunserial_current_minor -= count;
+
+ if (drv->nr == 0)
+ uart_unregister_driver(drv);
+}
+EXPORT_SYMBOL(sunserial_unregister_minors);
-int sunserial_console_match(struct console *con, struct device_node *dp,
+int __init sunserial_console_match(struct console *con, struct device_node *dp,
struct uart_driver *drv, int line)
{
int off;
con->cflag = cflag;
}
-EXPORT_SYMBOL(sunserial_console_termios);
-
/* Sun serial MOUSE auto baud rate detection. */
static struct mouse_baud_cflag {
int baud;
extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
extern int suncore_mouse_baud_detection(unsigned char, int);
-extern int sunserial_current_minor;
+extern int sunserial_register_minors(struct uart_driver *, int);
+extern void sunserial_unregister_minors(struct uart_driver *, int);
extern int sunserial_console_match(struct console *, struct device_node *,
struct uart_driver *, int);
port->dev = &op->dev;
- sunhv_reg.minor = sunserial_current_minor;
- sunhv_reg.nr = 1;
-
- err = uart_register_driver(&sunhv_reg);
+ err = sunserial_register_minors(&sunhv_reg, 1);
if (err)
goto out_free_con_read_page;
- sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64;
- sunserial_current_minor += 1;
-
sunserial_console_match(&sunhv_console, op->node,
&sunhv_reg, port->line);
uart_remove_one_port(&sunhv_reg, port);
out_unregister_driver:
- sunserial_current_minor -= 1;
- uart_unregister_driver(&sunhv_reg);
+ sunserial_unregister_minors(&sunhv_reg, 1);
out_free_con_read_page:
kfree(con_read_page);
uart_remove_one_port(&sunhv_reg, port);
- sunserial_current_minor -= 1;
- uart_unregister_driver(&sunhv_reg);
+ sunserial_unregister_minors(&sunhv_reg, 1);
kfree(port);
sunhv_port = NULL;
};
static struct uart_sunsab_port *sunsab_ports;
-static int num_channels;
#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
{
struct device_node *dp;
int err;
+ int num_channels = 0;
- num_channels = 0;
for_each_node_by_name(dp, "se")
num_channels += 2;
for_each_node_by_name(dp, "serial") {
if (!sunsab_ports)
return -ENOMEM;
- sunsab_reg.minor = sunserial_current_minor;
- sunsab_reg.nr = num_channels;
sunsab_reg.cons = SUNSAB_CONSOLE();
-
- err = uart_register_driver(&sunsab_reg);
+ err = sunserial_register_minors(&sunsab_reg, num_channels);
if (err) {
kfree(sunsab_ports);
sunsab_ports = NULL;
return err;
}
-
- sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64;
- sunserial_current_minor += num_channels;
}
return of_register_driver(&sab_driver, &of_bus_type);
static void __exit sunsab_exit(void)
{
of_unregister_driver(&sab_driver);
- if (num_channels) {
- sunserial_current_minor -= num_channels;
- uart_unregister_driver(&sunsab_reg);
+ if (sunsab_reg.nr) {
+ sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
}
kfree(sunsab_ports);
.remove = __devexit_p(su_remove),
};
-static int num_uart;
-
static int __init sunsu_init(void)
{
struct device_node *dp;
int err;
+ int num_uart = 0;
- num_uart = 0;
for_each_node_by_name(dp, "su") {
if (su_get_type(dp) == SU_PORT_PORT)
num_uart++;
}
if (num_uart) {
- sunsu_reg.minor = sunserial_current_minor;
- sunsu_reg.nr = num_uart;
- err = uart_register_driver(&sunsu_reg);
+ err = sunserial_register_minors(&sunsu_reg, num_uart);
if (err)
return err;
- sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64;
- sunserial_current_minor += num_uart;
}
err = of_register_driver(&su_driver, &of_bus_type);
if (err && num_uart)
- uart_unregister_driver(&sunsu_reg);
+ sunserial_unregister_minors(&sunsu_reg, num_uart);
return err;
}
static void __exit sunsu_exit(void)
{
- if (num_uart)
- uart_unregister_driver(&sunsu_reg);
+ if (sunsu_reg.nr)
+ sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
}
module_init(sunsu_init);
readb(&((__channel)->control))
#endif
-static int num_sunzilog;
-#define NUM_SUNZILOG num_sunzilog
-#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
.major = TTY_MAJOR,
};
-static int __init sunzilog_alloc_tables(void)
+static int __init sunzilog_alloc_tables(int num_sunzilog)
{
struct uart_sunzilog_port *up;
unsigned long size;
+ int num_channels = num_sunzilog * 2;
int i;
- size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port);
+ size = num_channels * sizeof(struct uart_sunzilog_port);
sunzilog_port_table = kzalloc(size, GFP_KERNEL);
if (!sunzilog_port_table)
return -ENOMEM;
- for (i = 0; i < NUM_CHANNELS; i++) {
+ for (i = 0; i < num_channels; i++) {
up = &sunzilog_port_table[i];
spin_lock_init(&up->port.lock);
if (i == 0)
sunzilog_irq_chain = up;
- if (i < NUM_CHANNELS - 1)
+ if (i < num_channels - 1)
up->next = up + 1;
else
up->next = NULL;
}
- size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *);
+ size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
if (!sunzilog_chip_regs) {
kfree(sunzilog_port_table);
struct device_node *dp;
int err, uart_count;
int num_keybms;
+ int num_sunzilog = 0;
- NUM_SUNZILOG = 0;
num_keybms = 0;
for_each_node_by_name(dp, "zs") {
- NUM_SUNZILOG++;
+ num_sunzilog++;
if (of_find_property(dp, "keyboard", NULL))
num_keybms++;
}
uart_count = 0;
- if (NUM_SUNZILOG) {
+ if (num_sunzilog) {
int uart_count;
- err = sunzilog_alloc_tables();
+ err = sunzilog_alloc_tables(num_sunzilog);
if (err)
goto out;
- uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
+ uart_count = (num_sunzilog * 2) - (2 * num_keybms);
- sunzilog_reg.nr = uart_count;
- sunzilog_reg.minor = sunserial_current_minor;
- err = uart_register_driver(&sunzilog_reg);
+ err = sunserial_register_minors(&sunzilog_reg, uart_count);
if (err)
goto out_free_tables;
-
- sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
-
- sunserial_current_minor += uart_count;
}
err = of_register_driver(&zs_driver, &of_bus_type);
of_unregister_driver(&zs_driver);
out_unregister_uart:
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (num_sunzilog) {
+ sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
sunzilog_reg.cons = NULL;
}
zilog_irq = -1;
}
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (sunzilog_reg.nr) {
+ sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
sunzilog_free_tables();
}
}
pci_set_master (dev);
- retval = usb_add_hcd (hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
/* (blocking) stop khubd and related activity */
usb_kill_urb(hub->urb);
if (hub->has_indicators)
- cancel_delayed_work(&hub->leds);
- if (hub->has_indicators || hub->tt.hub)
- flush_scheduled_work();
+ cancel_delayed_work_sync(&hub->leds);
+ if (hub->tt.hub)
+ cancel_work_sync(&hub->tt.kevent);
}
static void hub_activate(struct usb_hub *hub)
if (is_on) {
clk_on(udc);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, 0);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 1);
}
} else {
stop_activity(udc);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 0);
temp = in_le32(hcd->regs + 0x1a8);
out_le32(hcd->regs + 0x1a8, temp | 0x3);
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
struct ohci_regs __iomem *regs = ohci->regs;
int ints;
- /* we can eliminate a (slow) ohci_readl()
- * if _only_ WDH caused this irq
+ /* Read interrupt status (and flush pending writes). We ignore the
+ * optimization of checking the LSB of hcca->done_head; it doesn't
+ * work on all systems (edge triggering for OHCI can be a factor).
*/
- if ((ohci->hcca->done_head != 0)
- && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
- & 0x01)) {
- ints = OHCI_INTR_WDH;
+ ints = ohci_readl(ohci, ®s->intrstatus);
- /* cardbus/... hardware gone before remove() */
- } else if ((ints = ohci_readl (ohci, ®s->intrstatus)) == ~(u32)0) {
+ /* Check for an all 1's result which is a typical consequence
+ * of dead, unclocked, or unplugged (CardBus...) devices
+ */
+ if (ints == ~(u32)0) {
disable (ohci);
ohci_dbg (ohci, "device removed!\n");
return IRQ_HANDLED;
+ }
+
+ /* We only care about interrupts that are enabled */
+ ints &= ohci_readl(ohci, ®s->intrenable);
/* interrupt for some other device? */
- } else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) {
+ if (ints == 0)
return IRQ_NOTMINE;
- }
if (ints & OHCI_INTR_UE) {
// e.g. due to PCI Master/Target Abort
ohci_hcd_init(ohci);
- rv = usb_add_hcd(hcd, irq, 0);
+ rv = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (rv == 0)
return 0;
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs)
goto err_put_hcd;
- err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
if (err)
goto err_iounmap;
INIT_LIST_HEAD(&r8a66597->child_device);
hcd->rsrc_start = res->start;
- ret = usb_add_hcd(hcd, irq, 0);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (ret != 0) {
err("Failed to add hcd");
goto clean_up;
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned short status;
- unsigned long flags;
/*
* Read the interrupt status, and write it back to clear the
dev_err(uhci_dev(uhci), "host controller process "
"error, something bad happened!\n");
if (status & USBSTS_HCH) {
- spin_lock_irqsave(&uhci->lock, flags);
+ spin_lock(&uhci->lock);
if (uhci->rh_state >= UHCI_RH_RUNNING) {
dev_err(uhci_dev(uhci),
"host controller halted, "
* pending unlinks */
mod_timer(&hcd->rh_timer, jiffies);
}
- spin_unlock_irqrestore(&uhci->lock, flags);
+ spin_unlock(&uhci->lock);
}
}
if (status & USBSTS_RD)
usb_hcd_poll_rh_status(hcd);
else {
- spin_lock_irqsave(&uhci->lock, flags);
+ spin_lock(&uhci->lock);
uhci_scan_schedule(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
+ spin_unlock(&uhci->lock);
}
return IRQ_HANDLED;
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
.usb_driver = &cp2101_driver,
.id_table = id_table,
.num_interrupt_in = 0,
- .num_bulk_in = 0,
- .num_bulk_out = 0,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.open = cp2101_open,
.close = cp2101_close,
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/
* while others have trouble with more than 64K. At this time we
* are limiting both to 32K (64 sectores).
*/
- if ((us->flags & US_FL_MAX_SECTORS_64) &&
- sdev->request_queue->max_sectors > 64)
- blk_queue_max_sectors(sdev->request_queue, 64);
+ if (us->flags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
+ unsigned int max_sectors = 64;
+
+ if (us->flags & US_FL_MAX_SECTORS_MIN)
+ max_sectors = PAGE_CACHE_SIZE >> 9;
+ if (sdev->request_queue->max_sectors > max_sectors)
+ blk_queue_max_sectors(sdev->request_queue,
+ max_sectors);
+ }
/* We can't put these settings in slave_alloc() because that gets
* called before the device type is known. Consequently these
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Doug Maxey (dwm@austin.ibm.com) */
+UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
+ "IBM",
+ "IBM RSA2",
+ US_SC_DEVICE, US_PR_CB, NULL,
+ US_FL_MAX_SECTORS_MIN),
+
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
* Frank Copeland <fjc@thingy.apana.org.au> */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
-/* SanDisk that has a second LUN for a driver ISO, reported by
- * Ben Collins <bcollins@ubuntu.com> */
-UNUSUAL_DEV( 0x0781, 0x5406, 0x0000, 0xffff,
- "SanDisk",
- "U3 Cruzer Micro driver ISO",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN ),
-
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
#define L1GPU_DISPLAY_SYNC_HSYNC 1
#define L1GPU_DISPLAY_SYNC_VSYNC 2
-#define GPU_CMD_BUF_SIZE (64 * 1024)
+#define GPU_CMD_BUF_SIZE (2 * 1024 * 1024)
+#define GPU_FB_START (64 * 1024)
#define GPU_IOIF (0x0d000000UL)
#define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64)
#define GPU_MAX_LINE_LENGTH (65536 - 64)
if (src_line_length != dst_line_length)
line_length |= (u64)src_line_length << 32;
+ src_offset += GPU_FB_START;
status = lv1_gpu_context_attribute(ps3fb.context_handle,
L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
dst_offset, GPU_IOIF + src_offset,
status = lv1_gpu_context_attribute(ps3fb.context_handle,
L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP,
- xdr_lpar + ps3fb.xdr_size,
- GPU_CMD_BUF_SIZE,
- GPU_IOIF + ps3fb.xdr_size, 0);
+ xdr_lpar, GPU_CMD_BUF_SIZE,
+ GPU_IOIF, 0);
if (status) {
dev_err(dev,
"%s: lv1_gpu_context_attribute FB_SETUP failed: %d\n",
struct task_struct *task;
unsigned long max_ps3fb_size;
+ if (ps3fb_videomemory.size < GPU_CMD_BUF_SIZE) {
+ dev_err(&dev->core, "%s: Not enough video memory\n", __func__);
+ return -ENOMEM;
+ }
+
status = ps3_open_hv_device(dev);
if (status) {
dev_err(&dev->core, "%s: ps3_open_hv_device failed\n",
/* Clear memory to prevent kernel info leakage into userspace */
memset(ps3fb.xdr_ea, 0, ps3fb_videomemory.size);
- /* The GPU command buffer is at the end of video memory */
- ps3fb.xdr_size = ps3fb_videomemory.size - GPU_CMD_BUF_SIZE;
+ /*
+ * The GPU command buffer is at the start of video memory
+ * As we don't use the full command buffer, we can put the actual
+ * frame buffer at offset GPU_FB_START and save some precious XDR
+ * memory
+ */
+ ps3fb.xdr_ea += GPU_FB_START;
+ ps3fb.xdr_size = ps3fb_videomemory.size - GPU_FB_START;
retval = ps3fb_xdr_settings(xdr_lpar, &dev->core);
if (retval)
err_framebuffer_release:
framebuffer_release(info);
err_free_irq:
- free_irq(ps3fb.irq_no, dev);
+ free_irq(ps3fb.irq_no, &dev->core);
ps3_irq_plug_destroy(ps3fb.irq_no);
err_iounmap_dinfo:
iounmap((u8 __iomem *)ps3fb.dinfo);
kthread_stop(task);
}
if (ps3fb.irq_no) {
- free_irq(ps3fb.irq_no, dev);
+ free_irq(ps3fb.irq_no, &dev->core);
ps3_irq_plug_destroy(ps3fb.irq_no);
}
iounmap((u8 __iomem *)ps3fb.dinfo);
devices. At this moment we only have additional support for some
SuperMicro Inc. motherboards.
+config IT8712F_WDT
+ tristate "IT8712F (Smart Guardian) Watchdog Timer"
+ depends on X86
+ ---help---
+ This is the driver for the built-in watchdog timer on the IT8712F
+ Super I/0 chipset used on many motherboards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called it8712f_wdt.
+
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on X86
Most people will say N.
+config SBC7240_WDT
+ tristate "SBC Nano 7240 Watchdog Timer"
+ depends on X86_32
+ ---help---
+ This is the driver for the hardware watchdog found on the IEI
+ single board computers EPIC Nano 7240 (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc7240_wdt.
+
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
depends on X86
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
+obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
+obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ *
+ * Errata: WDT Clear is blocked after WDT Reset
+ *
+ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
+ * register, preventing the program to clear the next Watchdog Timer Reset.
+ *
+ * If you still want to use the WDT after a WDT reset a small code can be
+ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
+ * and use a GPIO pin to reset the system. This method requires that one of the
+ * GPIO pins are available and connected externally to the RESET_N pin. After
+ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
+ * the pin tristated with pullup.
*/
#include <linux/init.h>
#define WDT_CLR 0x04
+#define WDT_RCAUSE 0x10
+#define WDT_RCAUSE_POR 0
+#define WDT_RCAUSE_EXT 2
+#define WDT_RCAUSE_WDT 3
+#define WDT_RCAUSE_JTAG 4
+#define WDT_RCAUSE_SERP 5
+
#define WDT_BIT(name) (1 << WDT_##name)
#define WDT_BF(name, value) ((value) << WDT_##name)
void __iomem *regs;
spinlock_t io_lock;
int timeout;
+ int boot_status;
unsigned long users;
struct miscdevice miscdev;
};
at32_wdt_stop();
} else {
dev_dbg(wdt->miscdev.parent,
- "Unexpected close, not stopping watchdog!\n");
+ "unexpected close, not stopping watchdog!\n");
at32_wdt_pat();
}
clear_bit(1, &wdt->users);
return 0;
}
+/*
+ * Get the watchdog status.
+ */
+static int at32_wdt_get_status(void)
+{
+ int rcause;
+ int status = 0;
+
+ rcause = wdt_readl(wdt, RCAUSE);
+
+ switch (rcause) {
+ case WDT_BIT(RCAUSE_EXT):
+ status = WDIOF_EXTERN1;
+ break;
+ case WDT_BIT(RCAUSE_WDT):
+ status = WDIOF_CARDRESET;
+ break;
+ case WDT_BIT(RCAUSE_POR): /* fall through */
+ case WDT_BIT(RCAUSE_JTAG): /* fall through */
+ case WDT_BIT(RCAUSE_SERP): /* fall through */
+ default:
+ break;
+ }
+
+ return status;
+}
+
static struct watchdog_info at32_wdt_info = {
.identity = "at32ap700x watchdog",
.options = WDIOF_SETTIMEOUT |
case WDIOC_GETTIMEOUT:
ret = put_user(wdt->timeout, p);
break;
- case WDIOC_GETSTATUS: /* fall through */
- case WDIOC_GETBOOTSTATUS:
+ case WDIOC_GETSTATUS:
ret = put_user(0, p);
break;
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(wdt->boot_status, p);
+ break;
case WDIOC_SETOPTIONS:
ret = get_user(time, p);
if (ret)
dev_dbg(&pdev->dev, "could not map I/O memory\n");
goto err_free;
}
+
spin_lock_init(&wdt->io_lock);
- wdt->users = 0;
+ wdt->boot_status = at32_wdt_get_status();
+
+ /* Work-around for watchdog silicon errata. */
+ if (wdt->boot_status & WDIOF_CARDRESET) {
+ dev_info(&pdev->dev, "CPU must be reset with external "
+ "reset or POR due to silicon errata.\n");
+ ret = -EIO;
+ goto err_iounmap;
+ } else {
+ wdt->users = 0;
+ }
wdt->miscdev.minor = WATCHDOG_MINOR;
wdt->miscdev.name = "watchdog";
wdt->miscdev.fops = &at32_wdt_fops;
static struct watchdog_info bfin_wdt_info;
static unsigned long open_check;
static char expect_close;
-static spinlock_t bfin_wdt_spinlock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(bfin_wdt_spinlock);
/**
* bfin_wdt_keepalive - Keep the Userspace Watchdog Alive
--- /dev/null
+/*
+ * IT8712F "Smart Guardian" Watchdog support
+ *
+ * Copyright (c) 2006-2007 Jorge Boncompte - DTI2 <jorge@dti2.net>
+ *
+ * Based on info and code taken from:
+ *
+ * drivers/char/watchdog/scx200_wdt.c
+ * drivers/hwmon/it87.c
+ * IT8712F EC-LPC I/O Preliminary Specification 0.9.2.pdf
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The author(s) of this software shall not be held liable for damages
+ * of any nature resulting due to the use of this software. This
+ * software is provided AS-IS with no warranties.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#define NAME "it8712f_wdt"
+
+MODULE_AUTHOR("Jorge Boncompte - DTI2 <jorge@dti2.net>");
+MODULE_DESCRIPTION("IT8712F Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+static int margin = 60; /* in seconds */
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static struct semaphore it8712f_wdt_sem;
+static unsigned expect_close;
+static spinlock_t io_lock;
+
+/* Dog Food address - We use the game port address */
+static unsigned short address;
+
+#define REG 0x2e /* The register to read/write */
+#define VAL 0x2f /* The value to read/write */
+
+#define LDN 0x07 /* Register: Logical device select */
+#define DEVID 0x20 /* Register: Device ID */
+#define DEVREV 0x22 /* Register: Device Revision */
+#define ACT_REG 0x30 /* LDN Register: Activation */
+#define BASE_REG 0x60 /* LDN Register: Base address */
+
+#define IT8712F_DEVID 0x8712
+
+#define LDN_GPIO 0x07 /* GPIO and Watch Dog Timer */
+#define LDN_GAME 0x09 /* Game Port */
+
+#define WDT_CONTROL 0x71 /* WDT Register: Control */
+#define WDT_CONFIG 0x72 /* WDT Register: Configuration */
+#define WDT_TIMEOUT 0x73 /* WDT Register: Timeout Value */
+
+#define WDT_RESET_GAME 0x10
+#define WDT_RESET_KBD 0x20
+#define WDT_RESET_MOUSE 0x40
+#define WDT_RESET_CIR 0x80
+
+#define WDT_UNIT_SEC 0x80 /* If 0 in MINUTES */
+
+#define WDT_OUT_PWROK 0x10
+#define WDT_OUT_KRST 0x40
+
+static int
+superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static void
+superio_outb(int val, int reg)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
+static int
+superio_inw(int reg)
+{
+ int val;
+ outb(reg++, REG);
+ val = inb(VAL) << 8;
+ outb(reg, REG);
+ val |= inb(VAL);
+ return val;
+}
+
+static inline void
+superio_select(int ldn)
+{
+ outb(LDN, REG);
+ outb(ldn, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+ spin_lock(&io_lock);
+ outb(0x87, REG);
+ outb(0x01, REG);
+ outb(0x55, REG);
+ outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+ outb(0x02, REG);
+ outb(0x02, VAL);
+ spin_unlock(&io_lock);
+}
+
+static inline void
+it8712f_wdt_ping(void)
+{
+ inb(address);
+}
+
+static void
+it8712f_wdt_update_margin(void)
+{
+ int config = WDT_OUT_KRST | WDT_OUT_PWROK;
+
+ printk(KERN_INFO NAME ": timer margin %d seconds\n", margin);
+
+ /* The timeout register only has 8bits wide */
+ if (margin < 256)
+ config |= WDT_UNIT_SEC; /* else UNIT are MINUTES */
+ superio_outb(config, WDT_CONFIG);
+
+ superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT);
+}
+
+static void
+it8712f_wdt_enable(void)
+{
+ printk(KERN_DEBUG NAME ": enabling watchdog timer\n");
+ superio_enter();
+ superio_select(LDN_GPIO);
+
+ superio_outb(WDT_RESET_GAME, WDT_CONTROL);
+
+ it8712f_wdt_update_margin();
+
+ superio_exit();
+
+ it8712f_wdt_ping();
+}
+
+static void
+it8712f_wdt_disable(void)
+{
+ printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
+
+ superio_enter();
+ superio_select(LDN_GPIO);
+
+ superio_outb(0, WDT_CONFIG);
+ superio_outb(0, WDT_CONTROL);
+ superio_outb(0, WDT_TIMEOUT);
+
+ superio_exit();
+}
+
+static int
+it8712f_wdt_notify(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ if (code == SYS_HALT || code == SYS_POWER_OFF)
+ if (!nowayout)
+ it8712f_wdt_disable();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block it8712f_wdt_notifier = {
+ .notifier_call = it8712f_wdt_notify,
+};
+
+static ssize_t
+it8712f_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ /* check for a magic close character */
+ if (len) {
+ size_t i;
+
+ it8712f_wdt_ping();
+
+ expect_close = 0;
+ for (i = 0; i < len; ++i) {
+ char c;
+ if (get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_close = 42;
+ }
+ }
+
+ return len;
+}
+
+static int
+it8712f_wdt_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ static struct watchdog_info ident = {
+ .identity = "IT8712F Watchdog",
+ .firmware_version = 1,
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ };
+ int new_margin;
+
+ switch (cmd) {
+ default:
+ return -ENOTTY;
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ return 0;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+ case WDIOC_KEEPALIVE:
+ it8712f_wdt_ping();
+ return 0;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_margin, p))
+ return -EFAULT;
+ if (new_margin < 1)
+ return -EINVAL;
+ margin = new_margin;
+ superio_enter();
+ superio_select(LDN_GPIO);
+
+ it8712f_wdt_update_margin();
+
+ superio_exit();
+ it8712f_wdt_ping();
+ case WDIOC_GETTIMEOUT:
+ if (put_user(margin, p))
+ return -EFAULT;
+ return 0;
+ }
+}
+
+static int
+it8712f_wdt_open(struct inode *inode, struct file *file)
+{
+ /* only allow one at a time */
+ if (down_trylock(&it8712f_wdt_sem))
+ return -EBUSY;
+ it8712f_wdt_enable();
+
+ return nonseekable_open(inode, file);
+}
+
+static int
+it8712f_wdt_release(struct inode *inode, struct file *file)
+{
+ if (expect_close != 42) {
+ printk(KERN_WARNING NAME
+ ": watchdog device closed unexpectedly, will not"
+ " disable the watchdog timer\n");
+ } else if (!nowayout) {
+ it8712f_wdt_disable();
+ }
+ expect_close = 0;
+ up(&it8712f_wdt_sem);
+
+ return 0;
+}
+
+static struct file_operations it8712f_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = it8712f_wdt_write,
+ .ioctl = it8712f_wdt_ioctl,
+ .open = it8712f_wdt_open,
+ .release = it8712f_wdt_release,
+};
+
+static struct miscdevice it8712f_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &it8712f_wdt_fops,
+};
+
+static int __init
+it8712f_wdt_find(unsigned short *address)
+{
+ int err = -ENODEV;
+ int chip_type;
+
+ superio_enter();
+ chip_type = superio_inw(DEVID);
+ if (chip_type != IT8712F_DEVID)
+ goto exit;
+
+ superio_select(LDN_GAME);
+ superio_outb(1, ACT_REG);
+ if (!(superio_inb(ACT_REG) & 0x01)) {
+ printk(KERN_ERR NAME ": Device not activated, skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(BASE_REG);
+ if (*address == 0) {
+ printk(KERN_ERR NAME ": Base address not set, skipping\n");
+ goto exit;
+ }
+
+ err = 0;
+ printk(KERN_DEBUG NAME ": Found IT%04xF chip revision %d - "
+ "using DogFood address 0x%x\n",
+ chip_type, superio_inb(DEVREV) & 0x0f, *address);
+
+exit:
+ superio_exit();
+ return err;
+}
+
+static int __init
+it8712f_wdt_init(void)
+{
+ int err = 0;
+
+ spin_lock_init(&io_lock);
+
+ if (it8712f_wdt_find(&address))
+ return -ENODEV;
+
+ if (!request_region(address, 1, "IT8712F Watchdog")) {
+ printk(KERN_WARNING NAME ": watchdog I/O region busy\n");
+ return -EBUSY;
+ }
+
+ it8712f_wdt_disable();
+
+ sema_init(&it8712f_wdt_sem, 1);
+
+ err = register_reboot_notifier(&it8712f_wdt_notifier);
+ if (err) {
+ printk(KERN_ERR NAME ": unable to register reboot notifier\n");
+ goto out;
+ }
+
+ err = misc_register(&it8712f_wdt_miscdev);
+ if (err) {
+ printk(KERN_ERR NAME
+ ": cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, err);
+ goto reboot_out;
+ }
+
+ return 0;
+
+
+reboot_out:
+ unregister_reboot_notifier(&it8712f_wdt_notifier);
+out:
+ release_region(address, 1);
+ return err;
+}
+
+static void __exit
+it8712f_wdt_exit(void)
+{
+ misc_deregister(&it8712f_wdt_miscdev);
+ unregister_reboot_notifier(&it8712f_wdt_notifier);
+ release_region(address, 1);
+}
+
+module_init(it8712f_wdt_init);
+module_exit(it8712f_wdt_exit);
--- /dev/null
+/*
+ * NANO7240 SBC Watchdog device driver
+ *
+ * Based on w83877f.c by Scott Jennings,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * (c) Copyright 2007 Gilles GIGAN <gilles.gigan@jcu.edu.au>
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#define SBC7240_PREFIX "sbc7240_wdt: "
+
+#define SBC7240_ENABLE_PORT 0x443
+#define SBC7240_DISABLE_PORT 0x043
+#define SBC7240_SET_TIMEOUT_PORT SBC7240_ENABLE_PORT
+#define SBC7240_MAGIC_CHAR 'V'
+
+#define SBC7240_TIMEOUT 30
+#define SBC7240_MAX_TIMEOUT 255
+static int timeout = SBC7240_TIMEOUT; /* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<="
+ __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default="
+ __MODULE_STRING(SBC7240_TIMEOUT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file");
+
+#define SBC7240_OPEN_STATUS_BIT 0
+#define SBC7240_ENABLED_STATUS_BIT 1
+#define SBC7240_EXPECT_CLOSE_STATUS_BIT 2
+static unsigned long wdt_status;
+
+/*
+ * Utility routines
+ */
+
+static void wdt_disable(void)
+{
+ /* disable the watchdog */
+ if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+ inb_p(SBC7240_DISABLE_PORT);
+ printk(KERN_INFO SBC7240_PREFIX
+ "Watchdog timer is now disabled.\n");
+ }
+}
+
+static void wdt_enable(void)
+{
+ /* enable the watchdog */
+ if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+ inb_p(SBC7240_ENABLE_PORT);
+ printk(KERN_INFO SBC7240_PREFIX
+ "Watchdog timer is now enabled.\n");
+ }
+}
+
+static int wdt_set_timeout(int t)
+{
+ if (t < 1 || t > SBC7240_MAX_TIMEOUT) {
+ printk(KERN_ERR SBC7240_PREFIX
+ "timeout value must be 1<=x<=%d\n",
+ SBC7240_MAX_TIMEOUT);
+ return -1;
+ }
+ /* set the timeout */
+ outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT);
+ timeout = t;
+ printk(KERN_INFO SBC7240_PREFIX "timeout set to %d seconds\n", t);
+ return 0;
+}
+
+/* Whack the dog */
+static inline void wdt_keepalive(void)
+{
+ if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status))
+ inb_p(SBC7240_ENABLE_PORT);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+static ssize_t fop_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ size_t i;
+ char c;
+
+ if (count) {
+ if (!nowayout) {
+ clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+ &wdt_status);
+
+ /* is there a magic char ? */
+ for (i = 0; i != count; i++) {
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (c == SBC7240_MAGIC_CHAR) {
+ set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+ &wdt_status);
+ break;
+ }
+ }
+ }
+
+ wdt_keepalive();
+ }
+
+ return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status))
+ return -EBUSY;
+
+ wdt_enable();
+
+ return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+ if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status)
+ || !nowayout) {
+ wdt_disable();
+ } else {
+ printk(KERN_CRIT SBC7240_PREFIX
+ "Unexpected close, not stopping watchdog!\n");
+ wdt_keepalive();
+ }
+
+ clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status);
+ return 0;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING|
+ WDIOF_SETTIMEOUT|
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+ .identity = "SBC7240",
+};
+
+
+static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user
+ ((void __user *)arg, &ident, sizeof(ident))
+ ? -EFAULT : 0;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int __user *)arg);
+ case WDIOC_KEEPALIVE:
+ wdt_keepalive();
+ return 0;
+ case WDIOC_SETOPTIONS:{
+ int options;
+ int retval = -EINVAL;
+
+ if (get_user(options, (int __user *)arg))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ wdt_disable();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ wdt_enable();
+ retval = 0;
+ }
+
+ return retval;
+ }
+ case WDIOC_SETTIMEOUT:{
+ int new_timeout;
+
+ if (get_user(new_timeout, (int __user *)arg))
+ return -EFAULT;
+
+ if (wdt_set_timeout(new_timeout))
+ return -EINVAL;
+
+ /* Fall through */
+ }
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, (int __user *)arg);
+ default:
+ return -ENOTTY;
+ }
+}
+
+static const struct file_operations wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = fop_write,
+ .open = fop_open,
+ .release = fop_close,
+ .ioctl = fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &wdt_fops,
+};
+
+/*
+ * Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ wdt_disable();
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_notifier = {
+ .notifier_call = wdt_notify_sys,
+};
+
+static void __exit sbc7240_wdt_unload(void)
+{
+ printk(KERN_INFO SBC7240_PREFIX "Removing watchdog\n");
+ misc_deregister(&wdt_miscdev);
+
+ unregister_reboot_notifier(&wdt_notifier);
+ release_region(SBC7240_ENABLE_PORT, 1);
+}
+
+static int __init sbc7240_wdt_init(void)
+{
+ int rc = -EBUSY;
+
+ if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) {
+ printk(KERN_ERR SBC7240_PREFIX
+ "I/O address 0x%04x already in use\n",
+ SBC7240_ENABLE_PORT);
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* The IO port 0x043 used to disable the watchdog
+ * is already claimed by the system timer, so we
+ * cant request_region() it ...*/
+
+ if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
+ timeout = SBC7240_TIMEOUT;
+ printk(KERN_INFO SBC7240_PREFIX
+ "timeout value must be 1<=x<=%d, using %d\n",
+ SBC7240_MAX_TIMEOUT, timeout);
+ }
+ wdt_set_timeout(timeout);
+ wdt_disable();
+
+ rc = register_reboot_notifier(&wdt_notifier);
+ if (rc) {
+ printk(KERN_ERR SBC7240_PREFIX
+ "cannot register reboot notifier (err=%d)\n", rc);
+ goto err_out_region;
+ }
+
+ rc = misc_register(&wdt_miscdev);
+ if (rc) {
+ printk(KERN_ERR SBC7240_PREFIX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ wdt_miscdev.minor, rc);
+ goto err_out_reboot_notifier;
+ }
+
+ printk(KERN_INFO SBC7240_PREFIX
+ "Watchdog driver for SBC7240 initialised (nowayout=%d)\n",
+ nowayout);
+
+ return 0;
+
+err_out_reboot_notifier:
+ unregister_reboot_notifier(&wdt_notifier);
+err_out_region:
+ release_region(SBC7240_ENABLE_PORT, 1);
+err_out:
+ return rc;
+}
+
+module_init(sbc7240_wdt_init);
+module_exit(sbc7240_wdt_unload);
+
+MODULE_AUTHOR("Gilles Gigan");
+MODULE_DESCRIPTION("Watchdog device driver for single board"
+ " computers EPIC Nano 7240 from iEi");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
/* we will autodetect the W83697HF/HG watchdog */
for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) {
wdt_io = w83697hf_ioports[i];
- if (!w83697hf_check_wdt())
+ if (!w83697hf_check_wdt()) {
found++;
+ break;
+ }
}
} else {
if (!w83697hf_check_wdt())
help
Enabling this option allows you to explicitly choose which
compression modules, if any, are enabled in JFFS2. Removing
- compressors and mean you cannot read existing file systems,
+ compressors can mean you cannot read existing file systems,
and enabling experimental compressors can mean that you
write a file system which cannot be read by a standard kernel.
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
- current->mm->mmap = NULL;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
#ifdef __sparc__
}
#endif
-static inline void flush_warnings(struct dquot **dquots, char *warntype)
+static inline void flush_warnings(struct dquot * const *dquots, char *warntype)
{
int i;
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
if (inode->i_dquot[cnt])
mark_dquot_dirty(inode->i_dquot[cnt]);
- flush_warnings((struct dquot **)inode->i_dquot, warntype);
+ flush_warnings(inode->i_dquot, warntype);
up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
return ret;
}
struct ecryptfs_global_auth_tok *new_auth_tok;
int rc = 0;
- new_auth_tok = kmem_cache_alloc(ecryptfs_global_auth_tok_cache,
+ new_auth_tok = kmem_cache_zalloc(ecryptfs_global_auth_tok_cache,
GFP_KERNEL);
if (!new_auth_tok) {
rc = -ENOMEM;
lower_mnt = nd.mnt;
ecryptfs_set_superblock_lower(sb, lower_root->d_sb);
sb->s_maxbytes = lower_root->d_sb->s_maxbytes;
+ sb->s_blocksize = lower_root->d_sb->s_blocksize;
ecryptfs_set_dentry_lower(sb->s_root, lower_root);
ecryptfs_set_dentry_lower_mnt(sb->s_root, lower_mnt);
rc = ecryptfs_interpose(lower_root, sb->s_root, sb, 0);
return 0;
}
+/* This function must zero any hole we create */
static int ecryptfs_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
int rc = 0;
+ loff_t prev_page_end_size;
- if (from == 0 && to == PAGE_CACHE_SIZE)
- goto out; /* If we are writing a full page, it will be
- up to date. */
if (!PageUptodate(page)) {
rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
PAGE_CACHE_SIZE,
} else
SetPageUptodate(page);
}
- if (page->index != 0) {
- loff_t end_of_prev_pg_pos =
- (((loff_t)page->index << PAGE_CACHE_SHIFT) - 1);
- if (end_of_prev_pg_pos > i_size_read(page->mapping->host)) {
+ prev_page_end_size = ((loff_t)page->index << PAGE_CACHE_SHIFT);
+
+ /*
+ * If creating a page or more of holes, zero them out via truncate.
+ * Note, this will increase i_size.
+ */
+ if (page->index != 0) {
+ if (prev_page_end_size > i_size_read(page->mapping->host)) {
rc = ecryptfs_truncate(file->f_path.dentry,
- end_of_prev_pg_pos);
+ prev_page_end_size);
if (rc) {
printk(KERN_ERR "Error on attempt to "
"truncate to (higher) offset [%lld];"
- " rc = [%d]\n", end_of_prev_pg_pos, rc);
+ " rc = [%d]\n", prev_page_end_size, rc);
goto out;
}
}
- if (end_of_prev_pg_pos + 1 > i_size_read(page->mapping->host))
- zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ }
+ /*
+ * Writing to a new page, and creating a small hole from start of page?
+ * Zero it out.
+ */
+ if ((i_size_read(page->mapping->host) == prev_page_end_size) &&
+ (from != 0)) {
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
}
out:
return rc;
loff_t pos;
int rc = 0;
+ /*
+ * if we are writing beyond current size, then start pos
+ * at the current size - we'll fill in zeros from there.
+ */
if (offset > ecryptfs_file_size)
pos = ecryptfs_file_size;
else
if (num_bytes > total_remaining_bytes)
num_bytes = total_remaining_bytes;
if (pos < offset) {
+ /* remaining zeros to write, up to destination offset */
size_t total_remaining_zeros = (offset - pos);
if (num_bytes > total_remaining_zeros)
}
}
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
+
+ /*
+ * pos: where we're now writing, offset: where the request was
+ * If current pos is before request, we are filling zeros
+ * If we are at or beyond request, we are writing the *data*
+ * If we're in a fresh page beyond eof, zero it in either case
+ */
+ if (pos < offset || !start_offset_in_page) {
+ /* We are extending past the previous end of the file.
+ * Fill in zero values to the end of the page */
+ memset(((char *)ecryptfs_page_virt
+ + start_offset_in_page), 0,
+ PAGE_CACHE_SIZE - start_offset_in_page);
+ }
+
+ /* pos >= offset, we are now writing the data request */
if (pos >= offset) {
memcpy(((char *)ecryptfs_page_virt
+ start_offset_in_page),
(data + data_offset), num_bytes);
data_offset += num_bytes;
- } else {
- /* We are extending past the previous end of the file.
- * Fill in zero values up to the start of where we
- * will be writing data. */
- memset(((char *)ecryptfs_page_virt
- + start_offset_in_page), 0, num_bytes);
}
kunmap_atomic(ecryptfs_page_virt, KM_USER0);
flush_dcache_page(ecryptfs_page);
sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group);
sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
- if (EXT3_INODE_SIZE(sb) == 0)
+ if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0)
goto cantfind_ext3;
sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb);
if (sbi->s_inodes_per_block == 0)
sbi->s_desc_size = EXT4_MIN_DESC_SIZE;
sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
- if (EXT4_INODE_SIZE(sb) == 0)
+ if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0)
goto cantfind_ext4;
sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb);
if (sbi->s_inodes_per_block == 0)
*/
static void nfs_destroy_server(struct nfs_server *server)
{
- if (!IS_ERR(server->client_acl))
- rpc_shutdown_client(server->client_acl);
-
if (!(server->flags & NFS_MOUNT_NONLM))
lockd_down(); /* release rpc.lockd */
}
if (server->destroy != NULL)
server->destroy(server);
+
+ if (!IS_ERR(server->client_acl))
+ rpc_shutdown_client(server->client_acl);
if (!IS_ERR(server->client))
rpc_shutdown_client(server->client);
retval = generic_write_checks(file, &pos, &count, 0);
if (retval)
goto out;
- if (!count)
- goto out; /* return 0 */
retval = -EINVAL;
if ((ssize_t) count < 0)
}
/* Circumvent igrab(): we know the inode is not being freed */
atomic_inc(&inode->i_count);
+ /*
+ * Ensure that this dentry is invisible to d_find_alias().
+ * Otherwise, it may be spliced into the tree by
+ * d_materialise_unique if a parent directory from the same
+ * filesystem gets mounted at a later time.
+ * This again causes shrink_dcache_for_umount_subtree() to
+ * Oops, since the test for IS_ROOT() will fail.
+ */
+ spin_lock(&dcache_lock);
+ list_del_init(&sb->s_root->d_alias);
+ spin_unlock(&dcache_lock);
}
return 0;
}
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- if (mntroot->d_inode->i_op != &nfs_dir_inode_operations) {
+ if (mntroot->d_inode->i_op != server->nfs_client->rpc_ops->dir_inode_ops) {
dput(mntroot);
error = -ESTALE;
goto error_splat_super;
goto out;
}
+ /*
+ * Caller might still want to make changes to the
+ * tree root, so re-add it to the journal here.
+ */
+ ret = ocfs2_journal_access(handle, inode,
+ path_root_bh(left_path),
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
ret = ocfs2_rotate_subtree_left(inode, handle, left_path,
right_path, subtree_root,
dealloc, &deleted);
int ret, subtree_index;
struct buffer_head *leaf_bh = path_leaf_bh(right_path);
- /*
- * Pass both paths to the journal. The majority of inserts
- * will be touching all components anyway.
- */
- ret = ocfs2_journal_access_path(inode, handle, right_path);
- if (ret < 0) {
- mlog_errno(ret);
- goto out;
- }
-
if (left_path) {
int credits = handle->h_buffer_credits;
}
}
+ /*
+ * Pass both paths to the journal. The majority of inserts
+ * will be touching all components anyway.
+ */
+ ret = ocfs2_journal_access_path(inode, handle, right_path);
+ if (ret < 0) {
+ mlog_errno(ret);
+ goto out;
+ }
+
if (insert->ins_split != SPLIT_NONE) {
/*
* We could call ocfs2_insert_at_leaf() for some types
*/
ocfs2_split_record(inode, left_path, right_path,
insert_rec, insert->ins_split);
+
+ /*
+ * Split might have modified either leaf and we don't
+ * have a guarantee that the later edge insert will
+ * dirty this for us.
+ */
+ if (left_path)
+ ret = ocfs2_journal_dirty(handle,
+ path_leaf_bh(left_path));
+ if (ret)
+ mlog_errno(ret);
} else
ocfs2_insert_at_leaf(insert_rec, path_leaf_el(right_path),
insert, inode);
mlog_errno(ret);
goto out;
}
+
+ /*
+ * ocfs2_rotate_tree_right() might have extended the
+ * transaction without re-journaling our tree root.
+ */
+ ret = ocfs2_journal_access(handle, inode, di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
} else if (type->ins_appending == APPEND_TAIL
&& type->ins_contig != CONTIG_LEFT) {
ret = ocfs2_append_rec_to_path(inode, handle, insert_rec,
{
int ret = 0;
struct ocfs2_extent_list *el = path_leaf_el(path);
- struct buffer_head *eb_bh, *last_eb_bh = NULL;
+ struct buffer_head *last_eb_bh = NULL;
struct ocfs2_extent_rec *rec = &el->l_recs[split_index];
struct ocfs2_merge_ctxt ctxt;
struct ocfs2_extent_list *rightmost_el;
goto out;
}
- eb_bh = path_leaf_bh(path);
- ret = ocfs2_journal_access(handle, inode, eb_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (ret) {
- mlog_errno(ret);
- goto out;
- }
-
ctxt.c_contig_type = ocfs2_figure_merge_contig_type(inode, el,
split_index,
split_rec);
mlog_errno(ret);
}
- ocfs2_journal_dirty(handle, eb_bh);
-
out:
brelse(last_eb_bh);
return ret;
mlog(0, "clusters_to_del = %u in this pass, tail blk=%llu\n",
clusters_to_del, (unsigned long long)path_leaf_bh(path)->b_blocknr);
- BUG_ON(clusters_to_del == 0);
-
mutex_lock(&tl_inode->i_mutex);
tl_sem = 1;
/* ocfs2_truncate_log_needs_flush guarantees us at least one
* transaction. extend_trans will either extend the current handle by
* nblocks, or commit it and start a new one with nblocks credits.
*
+ * This might call journal_restart() which will commit dirty buffers
+ * and then restart the transaction. Before calling
+ * ocfs2_extend_trans(), any changed blocks should have been
+ * dirtied. After calling it, all blocks which need to be changed must
+ * go through another set of journal_access/journal_dirty calls.
+ *
* WARNING: This will not release any semaphores or disk locks taken
* during the transaction, so make sure they were taken *before*
* start_trans or we'll have ordering deadlocks.
mlog(0, "Trying to extend transaction by %d blocks\n", nblocks);
+#ifdef OCFS2_DEBUG_FS
+ status = 1;
+#else
status = journal_extend(handle, nblocks);
if (status < 0) {
mlog_errno(status);
goto bail;
}
+#endif
if (status > 0) {
mlog(0, "journal_extend failed, trying journal_restart\n");
ocfs2_orphan_filldir);
if (status) {
mlog_errno(status);
- goto out;
+ goto out_cluster;
}
*head = priv.head;
+out_cluster:
ocfs2_meta_unlock(orphan_dir_inode, 0);
out:
mutex_unlock(&orphan_dir_inode->i_mutex);
size = buf.used;
de = (struct hack_dirent *)buf.dirent;
+ curr_offset = de->offset /* & 0x7fffffff */;
while (size > 0) {
if (filldir(dirent, de->name, de->namlen,
curr_offset & 0x7fffffff,
reclen = sizeof(struct hack_dirent) + de->namlen;
size -= reclen;
- curr_offset = de->offset /* & 0x7fffffff */;
de = (struct hack_dirent *)((char *)de + reclen);
+ curr_offset = de->offset /* & 0x7fffffff */;
}
}
done:
- if (!error) {
+ if (!error) {
if (size == 0)
filp->f_pos = offset & 0x7fffffff;
else if (de)
ASSERT(vp);
ip = vn_to_inode(vp);
- if (S_ISCHR(mode) || S_ISBLK(mode))
- ip->i_rdev = rdev;
- else if (S_ISDIR(mode))
+ if (S_ISDIR(mode))
xfs_validate_fields(ip);
d_instantiate(dentry, ip);
xfs_validate_fields(dir);
continue;
cook = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk,
- ptr - (char *)block);
+ (char *)dep - (char *)block);
ino = be64_to_cpu(dep->inumber);
#if XFS_BIG_INUMS
ino += mp->m_inoadd;
*/
if (filldir(dirent, dep->name, dep->namelen, cook,
ino, DT_UNKNOWN)) {
- *offset = xfs_dir2_db_off_to_dataptr(mp,
- mp->m_dirdatablk,
- (char *)dep - (char *)block);
+ *offset = cook;
xfs_da_brelse(NULL, bp);
return 0;
}
* Won't fit. Return to caller.
*/
if (filldir(dirent, dep->name, dep->namelen,
- xfs_dir2_byte_to_dataptr(mp, curoff + length),
+ xfs_dir2_byte_to_dataptr(mp, curoff),
ino, DT_UNKNOWN))
break;
#if XFS_BIG_INUMS
ino += mp->m_inoadd;
#endif
- if (filldir(dirent, ".", 1, dotdot_offset, ino, DT_DIR)) {
+ if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) {
*offset = dot_offset;
return 0;
}
* Put .. entry unless we're starting past it.
*/
if (*offset <= dotdot_offset) {
- off = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk,
- XFS_DIR2_DATA_FIRST_OFFSET);
ino = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent);
#if XFS_BIG_INUMS
ino += mp->m_inoadd;
#endif
- if (filldir(dirent, "..", 2, off, ino, DT_DIR)) {
+ if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) {
*offset = dotdot_offset;
return 0;
}
#endif
if (filldir(dirent, sfep->name, sfep->namelen,
- off + xfs_dir2_data_entsize(sfep->namelen),
- ino, DT_UNKNOWN)) {
+ off, ino, DT_UNKNOWN)) {
*offset = off;
return 0;
}
mp = ip->i_mount;
vp = XFS_ITOV(ip);
- vn_iowait(ip); /* wait for the completion of any pending DIOs */
-
+ /* wait for the completion of any pending DIOs */
+ if (new_size < ip->i_size)
+ vn_iowait(ip);
+
/*
* Call toss_pages or flushinval_pages to get rid of pages
* overlapping the region being removed. We have to use
__EXTERN_INLINE u8
IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
{
- return IO_CONCAT(__IO_PREFIX,ioread8)((void __iomem *)a);
+ void __iomem *addr = (void __iomem *)a;
+ return IO_CONCAT(__IO_PREFIX,ioread8)(addr);
}
__EXTERN_INLINE u16
IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
{
- return IO_CONCAT(__IO_PREFIX,ioread16)((void __iomem *)a);
+ void __iomem *addr = (void __iomem *)a;
+ return IO_CONCAT(__IO_PREFIX,ioread16)(addr);
}
__EXTERN_INLINE void
IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
{
- IO_CONCAT(__IO_PREFIX,iowrite8)(b, (void __iomem *)a);
+ void __iomem *addr = (void __iomem *)a;
+ IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
}
__EXTERN_INLINE void
IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
{
- IO_CONCAT(__IO_PREFIX,iowrite16)(b, (void __iomem *)a);
+ void __iomem *addr = (void __iomem *)a;
+ IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
}
#endif
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
#define _ASM_GENERIC__TLB_H
#include <linux/swap.h>
+#include <linux/quicklist.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
+#ifdef CONFIG_QUICKLIST
+ tlb->need_flush += &__get_cpu_var(quicklist)[0].nr_pages != 0;
+#endif
tlb_flush_mmu(tlb, start, end);
/* keep the page table cache within bounds */
/**
* __clear_bit_unlock - Non-atomically clear a bit with release
*
- * This is like clear_bit_unlock, but the implementation may use a non-atomic
- * store (this one uses an atomic, however).
+ * This is like clear_bit_unlock, but the implementation uses a store
+ * with release semantics. See also __raw_spin_unlock().
*/
-#define __clear_bit_unlock clear_bit_unlock
+static __inline__ void
+__clear_bit_unlock(int nr, volatile void *addr)
+{
+ __u32 mask, new;
+ volatile __u32 *m;
+
+ m = (volatile __u32 *)addr + (nr >> 5);
+ mask = ~(1 << (nr & 31));
+ new = *m & mask;
+ barrier();
+ ia64_st4_rel_nta(m, new);
+}
/**
* __clear_bit - Clears a bit in memory (non-atomic version)
asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \
})
+#define ia64_st4_rel_nta(m, val) \
+({ \
+ asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val)); \
+})
+
#define ia64_stfs(x, regnum) \
({ \
register double __f__ asm ("f"#regnum); \
#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */
-#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */
+#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */
#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */
#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
#define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */
#define ia64_st4_rel __st4_rel
#define ia64_st8_rel __st8_rel
+/* FIXME: need st4.rel.nta intrinsic */
+#define ia64_st4_rel_nta __st4_rel
+
#define ia64_ld1_acq __ld1_acq
#define ia64_ld2_acq __ld2_acq
#define ia64_ld4_acq __ld4_acq
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
BTEFAIL_NOTAVAIL, /* BTE not available */
} bte_result_t;
+#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */
+#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */
+#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */
+#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */
+#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */
+#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */
+#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */
+
+#define BTE_ERR_BITS 0x3FUL
+#define BTE_ERR_SHIFT 36
+#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT)
+
+#define BTE_ERROR_RETRY(value) \
+ (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \
+ : (value != BTEFAIL_TOUT))
+
+/*
+ * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
+ */
+#define BTE_SHUB2_ERROR(_status) \
+ ((_status & BTE_ERR_MASK) \
+ ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
+ : _status)
+
+#define BTE_GET_ERROR_STATUS(_status) \
+ (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
+
+#define BTE_VALID_SH2_ERROR(value) \
+ ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
/*
* Structure defining a bte. An instance of this
BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
ret = bte_copy(src, pdst, len, mode, notification);
- if (ret != BTE_SUCCESS) {
+ if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
if (!in_interrupt()) {
cond_resched();
}
xpcDisconnected, /* 51: channel disconnected (closed) */
- xpcUnknownReason /* 52: unknown reason -- must be last in list */
+ xpcBteSh2Start, /* 52: BTE CRB timeout */
+
+ /* 53: 0x1 BTE Error Response Short */
+ xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
+
+ /* 54: 0x2 BTE Error Response Long */
+ xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
+
+ /* 56: 0x4 BTE Error Response DSB */
+ xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
+
+ /* 60: 0x8 BTE Error Response Access */
+ xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
+
+ /* 68: 0x10 BTE Error CRB timeout */
+ xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
+
+ /* 84: 0x20 BTE Error NACK limit */
+ xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
+
+ /* 115: BTE end */
+ xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
+
+ xpcUnknownReason /* 116: unknown reason -- must be last in list */
};
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
static inline enum xpc_retval
xpc_map_bte_errors(bte_result_t error)
{
+ if (is_shub2()) {
+ if (BTE_VALID_SH2_ERROR(error))
+ return xpcBteSh2Start + error;
+ else
+ return xpcBteUnmappedError;
+ }
switch (error) {
case BTE_SUCCESS: return xpcSuccess;
case BTEFAIL_DIR: return xpcBteDirectoryError;
#define smp_local_flush_tlb()
#endif
-#define flush_tlb_kernel_range(start, end) flush_tlb_all() /* XXX fix me */
+static inline void flush_tlb_kernel_range(unsigned long start,
+ unsigned long end)
+{
+ flush_tlb_all(); /* XXX fix me */
+}
#endif /* _ASM_IA64_TLBFLUSH_H */
#define Au1500_PCI_MEM_START 0x440000000ULL
#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
-#define PCI_IO_START (Au1500_PCI_IO_START + 0x1000)
-#define PCI_IO_END (Au1500_PCI_IO_END)
-#define PCI_MEM_START (Au1500_PCI_MEM_START)
-#define PCI_MEM_END (Au1500_PCI_MEM_END)
+#define PCI_IO_START 0x00001000
+#define PCI_IO_END 0x000FFFFF
+#define PCI_MEM_START 0x40000000
+#define PCI_MEM_END 0x4FFFFFFF
+
#define PCI_FIRST_DEVFN (0<<3)
#define PCI_LAST_DEVFN (19<<3)
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-extern void cpm_free_handler(int vec);
-
#define IMAP_ADDR (get_immrbase())
#define CPM_PIN_INPUT 0
static inline int pud_present(pud_t pud)
{
- return pud_val(pud) & _REGION_ENTRY_ORIGIN;
+ return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL;
}
static inline int pud_none(pud_t pud)
{
- return pud_val(pud) & _REGION_ENTRY_INV;
+ return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL;
}
static inline int pud_bad(pud_t pud)
static inline int pmd_present(pmd_t pmd)
{
- return pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN;
+ return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
}
static inline int pmd_none(pmd_t pmd)
{
- return pmd_val(pmd) & _SEGMENT_ENTRY_INV;
+ return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
}
static inline int pmd_bad(pmd_t pmd)
#define NR_SYSCALLS 315
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
#ifdef __KERNEL__
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
void (*sync_single_for_cpu)(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction);
- void (*sync_single_for_device)(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction);
void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
int nelems,
enum dma_data_direction direction);
- void (*sync_sg_for_device)(struct device *dev, struct scatterlist *sg,
- int nelems,
- enum dma_data_direction direction);
};
extern const struct dma_ops *dma_ops;
size_t size,
enum dma_data_direction direction)
{
- dma_ops->sync_single_for_device(dev, dma_handle, size, direction);
+ /* No flushing needed to sync cpu writes to the device. */
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
size_t size,
enum dma_data_direction direction)
{
- dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+ /* No flushing needed to sync cpu writes to the device. */
}
struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
- dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+ /* No flushing needed to sync cpu writes to the device. */
}
static inline int dma_mapping_error(dma_addr_t dma_addr)
*/
#define HV_FAST_MMU_DEMAP_ALL 0x24
+#ifndef __ASSEMBLY__
+extern void sun4v_mmu_demap_all(void);
+#endif
+
/* mmu_map_perm_addr()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
unsigned long kprobe_status;
unsigned long kprobe_old_eflags;
unsigned long kprobe_saved_eflags;
- long *jprobe_saved_esp;
+ unsigned long *jprobe_saved_esp;
struct pt_regs jprobe_saved_regs;
kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
struct prev_kprobe prev_kprobe;
unsigned long kprobe_status;
unsigned long kprobe_old_rflags;
unsigned long kprobe_saved_rflags;
- long *jprobe_saved_rsp;
+ unsigned long *jprobe_saved_rsp;
struct pt_regs jprobe_saved_regs;
kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
struct prev_kprobe prev_kprobe;
#ifdef __KERNEL__
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
#define __SAVE(reg,offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
#define __RESTORE(reg,offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
header-y += taskstats.h
header-y += telephony.h
header-y += termios.h
-header-y += ticable.h
header-y += times.h
header-y += tiocl.h
header-y += tipc.h
#include <linux/types.h>
+typedef unsigned short apm_event_t;
+typedef unsigned short apm_eventinfo_t;
+
struct apm_bios_info {
__u16 version;
__u16 cseg;
#ifdef __KERNEL__
-typedef unsigned short apm_event_t;
-typedef unsigned short apm_eventinfo_t;
-
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
#define APM_DS (APM_CS_16 + 8)
ATA_CMD_READ_LOG_EXT = 0x2f,
ATA_CMD_PMP_READ = 0xE4,
ATA_CMD_PMP_WRITE = 0xE8,
+ ATA_CMD_CONF_OVERLAY = 0xB1,
+ ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
SATA_AN = 0x05, /* Asynchronous Notification */
SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ /* feature values for SET_MAX */
+ ATA_SET_MAX_ADDR = 0x00,
+ ATA_SET_MAX_PASSWD = 0x01,
+ ATA_SET_MAX_LOCK = 0x02,
+ ATA_SET_MAX_UNLOCK = 0x03,
+ ATA_SET_MAX_FREEZE_LOCK = 0x04,
+
+ /* feature values for DEVICE CONFIGURATION OVERLAY */
+ ATA_DCO_RESTORE = 0xC0,
+ ATA_DCO_FREEZE_LOCK = 0xC1,
+ ATA_DCO_IDENTIFY = 0xC2,
+ ATA_DCO_SET = 0xC3,
+
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
unsigned short max_hw_segments;
unsigned short hardsect_size;
unsigned int max_segment_size;
+ unsigned int max_hw_sectors;
unsigned long seg_boundary_mask;
unsigned long bounce_pfn;
unsigned char no_cluster; /* inverted so that 0 is default */
/*
* io scheduler registration
*/
-extern int elv_register(struct elevator_type *);
+extern void elv_register(struct elevator_type *);
extern void elv_unregister(struct elevator_type *);
/*
extern unsigned long max_huge_pages;
extern unsigned long hugepages_treat_as_movable;
-extern int hugetlb_dynamic_pool;
+extern unsigned long nr_overcommit_huge_pages;
extern const unsigned long hugetlb_zero, hugetlb_infinity;
extern int sysctl_hugetlb_shm_group;
#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
+int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
}
void ide_dma_off(ide_drive_t *);
-void ide_dma_verbose(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
#else
+static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off(ide_drive_t *drive) { ; }
hwif->hwif_data = data;
}
-/* ide-lib.c */
-extern char *ide_xfer_verbose(u8 xfer_rate);
+const char *ide_xfer_verbose(u8 mode);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
__set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
+/* caller has locked the irq_desc and both params are valid */
+static inline void __set_irq_handler_unlocked(int irq,
+ irq_flow_handler_t handler)
+{
+ irq_desc[irq].handle_irq = handler;
+}
+
/*
* Set a highlevel flow handler for a given IRQ:
*/
ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
+ ATAPI_MAX_DRAIN = 16 << 10,
+
ATA_SHT_EMULATED = 1,
ATA_SHT_CMD_PER_LUN = 1,
ATA_SHT_THIS_ID = -1,
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
- ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */
+ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
struct scsi_device *sdev; /* attached SCSI device */
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
+ union acpi_object *gtf_cache;
#endif
/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
u64 n_sectors; /* size of device, if ATA */
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
- struct ata_acpi_gtm acpi_gtm;
+ struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+ if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
+ return &ap->__acpi_init_gtm;
+ return NULL;
+}
extern int ata_acpi_cbl_80wire(struct ata_port *ap);
-int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
-int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
+int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
+int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
#else
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+ return NULL;
+}
static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
#endif
* printk helpers
*/
#define ata_port_printk(ap, lv, fmt, args...) \
- printk(lv"ata%u: "fmt, (ap)->print_id , ##args)
+ printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
#define ata_link_printk(link, lv, fmt, args...) do { \
if ((link)->ap->nr_pmp_links) \
- printk(lv"ata%u.%02u: "fmt, (link)->ap->print_id, \
+ printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
- printk(lv"ata%u: "fmt, (link)->ap->print_id , ##args); \
+ printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)
#define ata_dev_printk(dev, lv, fmt, args...) \
- printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->print_id, \
+ printk("%sata%u.%02u: "fmt, lv, (dev)->link->ap->print_id, \
(dev)->link->pmp + (dev)->devno , ##args)
/*
unsigned int removed:1; /* host is being removed */
#endif
- unsigned int mode; /* current card mode of host */
-#define MMC_MODE_MMC 0
-#define MMC_MODE_SD 1
-
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
extern int nf_bridge_copy_header(struct sk_buff *skb);
static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb)
{
- if (skb->nf_bridge)
+ if (skb->nf_bridge &&
+ skb->nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT))
return nf_bridge_copy_header(skb);
return 0;
}
#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
+#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
#define PCI_VENDOR_ID_KORENIX 0x1982
#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
+++ /dev/null
-/* Hey EMACS -*- linux-c -*-
- *
- * tipar/tiser/tiusb - low level driver for handling link cables
- * designed for Texas Instruments graphing calculators.
- *
- * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- */
-
-#ifndef _TICABLE_H
-#define _TICABLE_H 1
-
-/* Internal default constants for the kernel module */
-#define TIMAXTIME 15 /* 1.5 seconds */
-#define IO_DELAY 10 /* 10 micro-seconds */
-
-/* Major & minor number for character devices */
-#define TIPAR_MAJOR 115 /* 0 to 7 */
-#define TIPAR_MINOR 0
-
-#define TISER_MAJOR 115 /* 8 to 15 */
-#define TISER_MINOR 8
-
-#define TIUSB_MAJOR 115 /* 16 to 31 */
-#define TIUSB_MINOR 16
-
-/*
- * Request values for the 'ioctl' function.
- */
-#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */
-#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */
-
-#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */
-#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */
-
-#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout */
-#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device */
-#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both pipes*/
-#define IOCTL_TIUSB_GET_MAXPS _IOR('N', 0x23, int) /* max packet size */
-#define IOCTL_TIUSB_GET_DEVID _IOR('N', 0x24, int) /* get device type */
-
-#endif /* TICABLE_H */
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
* @is_active: flag set when the interface is bound and not suspended.
+ * @sysfs_files_created: sysfs attributes exist
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
* @dev: driver model's view of this device
US_FLAG(IGNORE_DEVICE, 0x00000800) \
/* Don't claim device */ \
US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \
- /* sometimes sizes is too big */
+ /* sometimes sizes is too big */ \
+ US_FLAG(MAX_SECTORS_MIN,0x00002000) \
+ /* Sets max_sectors to arch min */
+
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
int videobuf_streamon(struct videobuf_queue *q);
int videobuf_streamoff(struct videobuf_queue *q);
+void videobuf_stop(struct videobuf_queue *q);
+
int videobuf_read_start(struct videobuf_queue *q);
void videobuf_read_stop(struct videobuf_queue *q);
ssize_t videobuf_read_stream(struct videobuf_queue *q,
#define AX25_P_ATALK 0xca /* Appletalk */
#define AX25_P_ATALK_ARP 0xcb /* Appletalk ARP */
#define AX25_P_IP 0xcc /* ARPA Internet Protocol */
-#define AX25_P_ARP 0xcd /* ARPA Adress Resolution */
+#define AX25_P_ARP 0xcd /* ARPA Address Resolution */
#define AX25_P_FLEXNET 0xce /* FlexNet */
#define AX25_P_NETROM 0xcf /* NET/ROM */
#define AX25_P_TEXT 0xF0 /* No layer 3 protocol impl. */
struct net_device *dev; /* virtual device associated with tunnel */
struct net_device_stats stat; /* statistics for tunnel device */
int recursion; /* depth of hard_start_xmit recursion */
- struct ip6_tnl_parm parms; /* tunnel configuration paramters */
+ struct ip6_tnl_parm parms; /* tunnel configuration parameters */
struct flowi fl; /* flowi template for xmit */
struct dst_entry *dst_cache; /* cached dst */
u32 dst_cookie;
irda_queue_t q; /* Must be first! */
discinfo_t data; /* Basic discovery information */
- int name_len; /* Lenght of nickname */
+ int name_len; /* Length of nickname */
LAP_REASON condition; /* More info about the discovery */
int gen_addr_bit; /* Need to generate a new device
/* The default SACK delay timeout for new associations. */
__u32 sackdelay;
- /* Flags controling Heartbeat, SACK delay, and Path MTU Discovery. */
+ /* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
__u32 param_flags;
struct sctp_initmsg initmsg;
/* PMTU : The current known path MTU. */
__u32 pathmtu;
- /* Flags controling Heartbeat, SACK delay, and Path MTU Discovery. */
+ /* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
__u32 param_flags;
/* The number of times INIT has been sent on this transport. */
*/
__u32 pathmtu;
- /* Flags controling Heartbeat, SACK delay, and Path MTU Discovery. */
+ /* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
__u32 param_flags;
/* SACK delay timeout */
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out_unlock;
+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
action = desc->action;
- if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
- if (desc->chip->mask)
- desc->chip->mask(irq);
- desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
- desc->status |= IRQ_PENDING;
+ if (unlikely(!action || (desc->status & IRQ_DISABLED)))
goto out_unlock;
- }
- desc->status &= ~(IRQ_REPLAY | IRQ_WAITING | IRQ_PENDING);
desc->status |= IRQ_INPROGRESS;
spin_unlock(&desc->lock);
#include <linux/nmi.h>
#include <linux/kexec.h>
#include <linux/debug_locks.h>
+#include <linux/random.h>
int panic_on_oops;
int tainted;
}
/*
+ * 64-bit random ID for oopses:
+ */
+static u64 oops_id;
+
+static int init_oops_id(void)
+{
+ if (!oops_id)
+ get_random_bytes(&oops_id, sizeof(oops_id));
+
+ return 0;
+}
+late_initcall(init_oops_id);
+
+/*
* Called when the architecture exits its oops handler, after printing
* everything.
*/
void oops_exit(void)
{
do_oops_enter_exit();
+ init_oops_id();
+ printk(KERN_WARNING "---[ end trace %016llx ]---\n",
+ (unsigned long long)oops_id);
}
#ifdef CONFIG_CC_STACKPROTECTOR
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/module.h>
#include <linux/rwsem.h>
/*
* lock for reading
*/
-void down_read(struct rw_semaphore *sem)
+void __sched down_read(struct rw_semaphore *sem)
{
might_sleep();
rwsem_acquire_read(&sem->dep_map, 0, 0, _RET_IP_);
/*
* lock for writing
*/
-void down_write(struct rw_semaphore *sem)
+void __sched down_write(struct rw_semaphore *sem)
{
might_sleep();
rwsem_acquire(&sem->dep_map, 0, 0, _RET_IP_);
# define finish_arch_switch(prev) do { } while (0)
#endif
+static inline int task_current(struct rq *rq, struct task_struct *p)
+{
+ return rq->curr == p;
+}
+
#ifndef __ARCH_WANT_UNLOCKED_CTXSW
static inline int task_running(struct rq *rq, struct task_struct *p)
{
- return rq->curr == p;
+ return task_current(rq, p);
}
static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
#ifdef CONFIG_SMP
return p->oncpu;
#else
- return rq->curr == p;
+ return task_current(rq, p);
#endif
}
struct rq *rq = cpu_rq(smp_processor_id());
u64 now = sched_clock();
+ touch_softlockup_watchdog();
rq->idle_clock += delta_ns;
/*
* Override the previous timestamp and ignore all
rq = task_rq_lock(p, &flags);
ns = p->se.sum_exec_runtime;
- if (rq->curr == p) {
+ if (task_current(rq, p)) {
update_rq_clock(rq);
delta_exec = rq->clock - p->se.exec_start;
if ((s64)delta_exec > 0)
oldprio = p->prio;
on_rq = p->se.on_rq;
- running = task_running(rq, p);
+ running = task_current(rq, p);
if (on_rq) {
dequeue_task(rq, p, 0);
if (running)
}
update_rq_clock(rq);
on_rq = p->se.on_rq;
- running = task_running(rq, p);
+ running = task_current(rq, p);
if (on_rq) {
deactivate_task(rq, p, 0);
if (running)
update_rq_clock(rq);
- running = task_running(rq, tsk);
+ running = task_current(rq, tsk);
on_rq = tsk->se.on_rq;
if (on_rq) {
if (!initial) {
/* sleeps upto a single latency don't count. */
- if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se) &&
- task_of(se)->policy != SCHED_BATCH)
+ if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se))
vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
static void task_tick_rt(struct rq *rq, struct task_struct *p)
{
+ update_curr_rt(rq);
+
/*
* RR tasks need a special form of timeslice management.
* FIFO tasks have no timeslices.
};
#ifdef CONFIG_SCHED_DEBUG
-static unsigned long min_sched_granularity_ns = 100000; /* 100 usecs */
-static unsigned long max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
-static unsigned long min_wakeup_granularity_ns; /* 0 usecs */
-static unsigned long max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
+static int min_sched_granularity_ns = 100000; /* 100 usecs */
+static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
+static int min_wakeup_granularity_ns; /* 0 usecs */
+static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
#endif
static struct ctl_table kern_table[] = {
},
{
.ctl_name = CTL_UNNUMBERED,
- .procname = "hugetlb_dynamic_pool",
- .data = &hugetlb_dynamic_pool,
- .maxlen = sizeof(hugetlb_dynamic_pool),
+ .procname = "nr_overcommit_hugepages",
+ .data = &nr_overcommit_huge_pages,
+ .maxlen = sizeof(nr_overcommit_huge_pages),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_doulongvec_minmax,
},
#endif
{
{}
};
-static struct trans_ctl_table trans_net_ax25_table[] = {
+static struct trans_ctl_table trans_net_ax25_param_table[] = {
{ NET_AX25_IP_DEFAULT_MODE, "ip_default_mode" },
{ NET_AX25_DEFAULT_MODE, "ax25_default_mode" },
{ NET_AX25_BACKOFF_TYPE, "backoff_type" },
{}
};
+static struct trans_ctl_table trans_net_ax25_table[] = {
+ { 0, NULL, trans_net_ax25_param_table },
+ {}
+};
+
static struct trans_ctl_table trans_net_bridge_table[] = {
{ NET_BRIDGE_NF_CALL_ARPTABLES, "bridge-nf-call-arptables" },
{ NET_BRIDGE_NF_CALL_IPTABLES, "bridge-nf-call-iptables" },
}
/*
- * Reprogram the broadcast device:
- *
- * Called with tick_broadcast_lock held and interrupts disabled.
- */
-static int tick_broadcast_reprogram(void)
-{
- ktime_t expires = { .tv64 = KTIME_MAX };
- struct tick_device *td;
- int cpu;
-
- /*
- * Find the event which expires next:
- */
- for (cpu = first_cpu(tick_broadcast_oneshot_mask); cpu != NR_CPUS;
- cpu = next_cpu(cpu, tick_broadcast_oneshot_mask)) {
- td = &per_cpu(tick_cpu_device, cpu);
- if (td->evtdev->next_event.tv64 < expires.tv64)
- expires = td->evtdev->next_event;
- }
-
- if (expires.tv64 == KTIME_MAX)
- return 0;
-
- return tick_broadcast_set_event(expires, 0);
-}
-
-/*
* Handle oneshot mode broadcasting
*/
static void tick_handle_oneshot_broadcast(struct clock_event_device *dev)
{
struct tick_device *td;
cpumask_t mask;
- ktime_t now;
+ ktime_t now, next_event;
int cpu;
spin_lock(&tick_broadcast_lock);
again:
dev->next_event.tv64 = KTIME_MAX;
+ next_event.tv64 = KTIME_MAX;
mask = CPU_MASK_NONE;
now = ktime_get();
/* Find all expired events */
td = &per_cpu(tick_cpu_device, cpu);
if (td->evtdev->next_event.tv64 <= now.tv64)
cpu_set(cpu, mask);
+ else if (td->evtdev->next_event.tv64 < next_event.tv64)
+ next_event.tv64 = td->evtdev->next_event.tv64;
}
/*
- * Wakeup the cpus which have an expired event. The broadcast
- * device is reprogrammed in the return from idle code.
+ * Wakeup the cpus which have an expired event.
+ */
+ tick_do_broadcast(mask);
+
+ /*
+ * Two reasons for reprogram:
+ *
+ * - The global event did not expire any CPU local
+ * events. This happens in dyntick mode, as the maximum PIT
+ * delta is quite small.
+ *
+ * - There are pending events on sleeping CPUs which were not
+ * in the event mask
*/
- if (!tick_do_broadcast(mask)) {
+ if (next_event.tv64 != KTIME_MAX) {
/*
- * The global event did not expire any CPU local
- * events. This happens in dyntick mode, as the
- * maximum PIT delta is quite small.
+ * Rearm the broadcast device. If event expired,
+ * repeat the above
*/
- if (tick_broadcast_reprogram())
+ if (tick_broadcast_set_event(next_event, 0))
goto again;
}
spin_unlock(&tick_broadcast_lock);
*/
static struct lock_class_key base_lock_keys[NR_CPUS];
-static int __devinit init_timers_cpu(int cpu)
+static int __cpuinit init_timers_cpu(int cpu)
{
int j;
tvec_base_t *base;
- static char __devinitdata tvec_base_done[NR_CPUS];
+ static char __cpuinitdata tvec_base_done[NR_CPUS];
if (!tvec_base_done[cpu]) {
static char boot_done;
/**
- * kobject_set_name - Set the name of an object
- * @kobj: object.
- * @fmt: format string used to build the name
+ * kobject_set_name - Set the name of a kobject
+ * @kobj: kobject to name
+ * @fmt: format string used to build the name
*
- * If strlen(name) >= KOBJ_NAME_LEN, then use a dynamically allocated
- * string that @kobj->k_name points to. Otherwise, use the static
- * @kobj->name array.
+ * This sets the name of the kobject. If you have already added the
+ * kobject to the system, you must call kobject_rename() in order to
+ * change the name of the kobject.
*/
int kobject_set_name(struct kobject * kobj, const char * fmt, ...)
{
/*
* wait for a lock to be granted
*/
-static struct rw_semaphore *
+static struct rw_semaphore __sched *
rwsem_down_failed_common(struct rw_semaphore *sem,
struct rwsem_waiter *waiter, signed long adjustment)
{
def_bool y
depends on SPARSEMEM && !SPARSEMEM_STATIC
-#
-# SPARSEMEM_VMEMMAP uses a virtually mapped mem_map to optimise pfn_to_page
-# and page_to_pfn. The most efficient option where kernel virtual space is
-# not under pressure.
-#
config SPARSEMEM_VMEMMAP_ENABLE
def_bool n
config SPARSEMEM_VMEMMAP
- bool
- depends on SPARSEMEM
- default y if (SPARSEMEM_VMEMMAP_ENABLE)
+ bool "Sparse Memory virtual memmap"
+ depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE
+ default y
+ help
+ SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise
+ pfn_to_page and page_to_pfn operations. This is the most
+ efficient option when sufficient kernel resources are available.
# eventually, we can have this option just 'select SPARSEMEM'
config MEMORY_HOTPLUG
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
BUG_ON(page_mapped(page));
+
+ /*
+ * Some filesystems seem to re-dirty the page even after
+ * the VM has canceled the dirty bit (eg ext3 journaling).
+ *
+ * Fix it up by doing a final dirty accounting check after
+ * having removed the page entirely.
+ */
+ if (PageDirty(page) && mapping_cap_account_dirty(mapping)) {
+ dec_zone_page_state(page, NR_FILE_DIRTY);
+ dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
+ }
}
void remove_from_page_cache(struct page *page)
static unsigned int surplus_huge_pages_node[MAX_NUMNODES];
static gfp_t htlb_alloc_mask = GFP_HIGHUSER;
unsigned long hugepages_treat_as_movable;
-int hugetlb_dynamic_pool;
+unsigned long nr_overcommit_huge_pages;
static int hugetlb_next_nid;
/*
unsigned long address)
{
struct page *page;
+ unsigned int nid;
- /* Check if the dynamic pool is enabled */
- if (!hugetlb_dynamic_pool)
+ /*
+ * Assume we will successfully allocate the surplus page to
+ * prevent racing processes from causing the surplus to exceed
+ * overcommit
+ *
+ * This however introduces a different race, where a process B
+ * tries to grow the static hugepage pool while alloc_pages() is
+ * called by process A. B will only examine the per-node
+ * counters in determining if surplus huge pages can be
+ * converted to normal huge pages in adjust_pool_surplus(). A
+ * won't be able to increment the per-node counter, until the
+ * lock is dropped by B, but B doesn't drop hugetlb_lock until
+ * no more huge pages can be converted from surplus to normal
+ * state (and doesn't try to convert again). Thus, we have a
+ * case where a surplus huge page exists, the pool is grown, and
+ * the surplus huge page still exists after, even though it
+ * should just have been converted to a normal huge page. This
+ * does not leak memory, though, as the hugepage will be freed
+ * once it is out of use. It also does not allow the counters to
+ * go out of whack in adjust_pool_surplus() as we don't modify
+ * the node values until we've gotten the hugepage and only the
+ * per-node value is checked there.
+ */
+ spin_lock(&hugetlb_lock);
+ if (surplus_huge_pages >= nr_overcommit_huge_pages) {
+ spin_unlock(&hugetlb_lock);
return NULL;
+ } else {
+ nr_huge_pages++;
+ surplus_huge_pages++;
+ }
+ spin_unlock(&hugetlb_lock);
page = alloc_pages(htlb_alloc_mask|__GFP_COMP|__GFP_NOWARN,
HUGETLB_PAGE_ORDER);
+
+ spin_lock(&hugetlb_lock);
if (page) {
+ nid = page_to_nid(page);
set_compound_page_dtor(page, free_huge_page);
- spin_lock(&hugetlb_lock);
- nr_huge_pages++;
- nr_huge_pages_node[page_to_nid(page)]++;
- surplus_huge_pages++;
- surplus_huge_pages_node[page_to_nid(page)]++;
- spin_unlock(&hugetlb_lock);
+ /*
+ * We incremented the global counters already
+ */
+ nr_huge_pages_node[nid]++;
+ surplus_huge_pages_node[nid]++;
+ } else {
+ nr_huge_pages--;
+ surplus_huge_pages--;
}
+ spin_unlock(&hugetlb_lock);
return page;
}
* Increase the pool size
* First take pages out of surplus state. Then make up the
* remaining difference by allocating fresh huge pages.
+ *
+ * We might race with alloc_buddy_huge_page() here and be unable
+ * to convert a surplus huge page to a normal huge page. That is
+ * not critical, though, it just means the overall size of the
+ * pool might be one hugepage larger than it needs to be, but
+ * within all the constraints specified by the sysctls.
*/
spin_lock(&hugetlb_lock);
while (surplus_huge_pages && count > persistent_huge_pages) {
* to keep enough around to satisfy reservations). Then place
* pages into surplus state as needed so the pool will shrink
* to the desired size as pages become free.
+ *
+ * By placing pages into the surplus state independent of the
+ * overcommit value, we are allowing the surplus pool size to
+ * exceed overcommit. There are few sane options here. Since
+ * alloc_buddy_huge_page() is checking the global counter,
+ * though, we'll note that we're not allowed to exceed surplus
+ * and won't grow the pool anywhere else. Not until one of the
+ * sysctls are changed, or the surplus pages go out of use.
*/
min_count = resv_huge_pages + nr_huge_pages - free_huge_pages;
min_count = max(count, min_count);
struct page *page = __rmqueue(zone, order, migratetype);
if (unlikely(page == NULL))
break;
+
+ /*
+ * Split buddy pages returned by expand() are received here
+ * in physical page order. The page is added to the callers and
+ * list and the list head then moves forward. From the callers
+ * perspective, the linked list is ordered by page number in
+ * some conditions. This is useful for IO devices that can
+ * merge IO requests if the physical pages are ordered
+ * properly.
+ */
list_add(&page->lru, list);
set_page_private(page, migratetype);
+ list = &page->lru;
}
spin_unlock(&zone->lock);
return i;
* Mininum number of partial slabs. These will be left on the partial
* lists even if they are empty. kmem_cache_shrink may reclaim them.
*/
-#define MIN_PARTIAL 2
+#define MIN_PARTIAL 5
/*
* Maximum number of desirable partial slabs.
void **object;
struct page *new;
- /* We handle __GFP_ZERO in the caller */
- gfpflags &= ~__GFP_ZERO;
-
if (!c->page)
goto new_slab;
* then add it.
*/
if (unlikely(!prior))
- add_partial(get_node(s, page_to_nid(page)), page);
+ add_partial_tail(get_node(s, page_to_nid(page)), page);
out_unlock:
slab_unlock(page);
return -EEXIST;
section = sparse_index_alloc(nid);
+ if (!section)
+ return -ENOMEM;
/*
* This lock keeps two different sections from
* reallocating for the same index
* no locking for this, because it does its own
* plus, it does a kmalloc
*/
- sparse_index_init(section_nr, pgdat->node_id);
+ ret = sparse_index_init(section_nr, pgdat->node_id);
+ if (ret < 0 && ret != -EEXIST)
+ return ret;
memmap = kmalloc_section_memmap(section_nr, pgdat->node_id, nr_pages);
+ if (!memmap)
+ return -ENOMEM;
usemap = __kmalloc_section_usemap();
+ if (!usemap) {
+ __kfree_section_memmap(memmap, nr_pages);
+ return -ENOMEM;
+ }
pgdat_resize_lock(pgdat, &flags);
goto out;
}
- if (!usemap) {
- ret = -ENOMEM;
- goto out;
- }
ms->section_mem_map |= SECTION_MARKED_PRESENT;
ret = sparse_init_one_section(ms, section_nr, memmap, usemap);
out:
pgdat_resize_unlock(pgdat, &flags);
- if (ret <= 0)
+ if (ret <= 0) {
+ kfree(usemap);
__kfree_section_memmap(memmap, nr_pages);
+ }
return ret;
}
#endif
{
int i;
- vlan_netlink_fini();
vlan_ioctl_set(NULL);
+ vlan_netlink_fini();
/* Un-register us from receiving netdevice events */
unregister_netdevice_notifier(&vlan_notifier_block);
}
skb_pull(skb, 1); /* Remove PID */
- skb_reset_mac_header(skb);
+ skb->mac_header = skb->network_header;
skb_reset_network_header(skb);
skb->dev = ax25->ax25_dev->dev;
skb->pkt_type = PACKET_HOST;
ax25_link_failed(ax25, reason);
if (ax25->sk != NULL) {
+ local_bh_disable();
bh_lock_sock(ax25->sk);
ax25->sk->sk_state = TCP_CLOSE;
ax25->sk->sk_err = reason;
sock_set_flag(ax25->sk, SOCK_DEAD);
}
bh_unlock_sock(ax25->sk);
+ local_bh_enable();
}
}
void br_dev_setup(struct net_device *dev)
{
- memset(dev->dev_addr, 0, ETH_ALEN);
-
+ random_ether_addr(dev->dev_addr);
ether_setup(dev);
dev->do_ioctl = br_dev_ioctl;
if (copy_to_user(CMSG_COMPAT_DATA(cm), data, cmlen - sizeof(struct compat_cmsghdr)))
return -EFAULT;
cmlen = CMSG_COMPAT_SPACE(len);
+ if (kmsg->msg_controllen < cmlen)
+ cmlen = kmsg->msg_controllen;
kmsg->msg_control += cmlen;
kmsg->msg_controllen -= cmlen;
return 0;
/*
* Upload unicast and multicast address lists to device and
* configure RX filtering. When the device doesn't support unicast
- * filtering it is put in promiscous mode while unicast addresses
+ * filtering it is put in promiscuous mode while unicast addresses
* are present.
*/
void __dev_set_rx_mode(struct net_device *dev)
* @dev: device
*
* This function shuts down a device interface and removes it
- * from the kernel tables. On success 0 is returned, on a failure
- * a negative errno code is returned.
+ * from the kernel tables.
*
* Callers must hold the rtnl semaphore. You may want
* unregister_netdev() instead of this.
* @dev: device
*
* This function shuts down a device interface and removes it
- * from the kernel tables. On success 0 is returned, on a failure
- * a negative errno code is returned.
+ * from the kernel tables.
*
* This is just a wrapper for unregister_netdevice that takes
* the rtnl semaphore. In general you want to use this and not
if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
goto out;
cmlen = CMSG_SPACE(len);
+ if (msg->msg_controllen < cmlen)
+ cmlen = msg->msg_controllen;
msg->msg_control += cmlen;
msg->msg_controllen -= cmlen;
err = 0;
* @dccpavr_ack_ackno - sequence number being acknowledged
* @dccpavr_ack_ptr - pointer into dccpav_buf where this record starts
* @dccpavr_ack_nonce - dccpav_ack_nonce at the time this record was sent
- * @dccpavr_sent_len - lenght of the record in dccpav_buf
+ * @dccpavr_sent_len - length of the record in dccpav_buf
*/
struct dccp_ackvec_record {
struct list_head dccpavr_node;
ccid3_tx_state_name(hctx->ccid3hctx_state),
(unsigned)(hctx->ccid3hctx_x >> 6));
/* The value of R is still undefined and so we can not recompute
- * the timout value. Keep initial value as per [RFC 4342, 5]. */
+ * the timeout value. Keep initial value as per [RFC 4342, 5]. */
t_nfb = TFRC_INITIAL_TIMEOUT;
ccid3_update_send_interval(hctx);
break;
struct arphdr *arp;
unsigned char *arp_ptr;
struct rtable *rt;
- unsigned char *sha, *tha;
+ unsigned char *sha;
__be32 sip, tip;
u16 dev_type = dev->type;
int addr_type;
arp_ptr += dev->addr_len;
memcpy(&sip, arp_ptr, 4);
arp_ptr += 4;
- tha = arp_ptr;
arp_ptr += dev->addr_len;
memcpy(&tip, arp_ptr, 4);
/*
goto errout;
}
- ipv4_devconf_setall(in_dev);
-
ifa = inet_alloc_ifa();
if (ifa == NULL) {
/*
goto errout;
}
+ ipv4_devconf_setall(in_dev);
in_dev_hold(in_dev);
if (tb[IFA_ADDRESS] == NULL)
#include <linux/pfkeyv2.h>
#include <linux/random.h>
#include <linux/spinlock.h>
+#include <linux/in6.h>
#include <net/icmp.h>
#include <net/protocol.h>
#include <net/udp.h>
/* ... check padding bits here. Silly. :-) */
+ /* RFC4303: Drop dummy packets without any error */
+ if (nexthdr[1] == IPPROTO_NONE)
+ goto out;
+
iph = ip_hdr(skb);
ihl = iph->ihl * 4;
nlh = nlmsg_hdr(skb);
if (skb->len < NLMSG_SPACE(0) || skb->len < nlh->nlmsg_len ||
- nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*frn))) {
- kfree_skb(skb);
+ nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*frn)))
return;
- }
+
+ skb = skb_clone(skb, GFP_KERNEL);
+ if (skb == NULL)
+ return;
+ nlh = nlmsg_hdr(skb);
frn = (struct fib_result_nl *) NLMSG_DATA(nlh);
tb = fib_get_table(frn->tb_id_in);
offset += 4;
}
- skb_reset_mac_header(skb);
+ skb->mac_header = skb->network_header;
__pskb_pull(skb, offset);
skb_reset_network_header(skb);
skb_postpull_rcsum(skb, skb_transport_header(skb), offset);
/*
* Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- * command line parameter. It consists of option fields separated by colons in
- * the following order:
- *
- * <client-ip>:<server-ip>:<gw-ip>:<netmask>:<host name>:<device>:<PROTO>
- *
- * Any of the fields can be empty which means to use a default value:
- * <client-ip> - address given by BOOTP or RARP
- * <server-ip> - address of host returning BOOTP or RARP packet
- * <gw-ip> - none, or the address returned by BOOTP
- * <netmask> - automatically determined from <client-ip>, or the
- * one returned by BOOTP
- * <host name> - <client-ip> in ASCII notation, or the name returned
- * by BOOTP
- * <device> - use all available devices
- * <PROTO>:
- * off|none - don't do autoconfig at all (DEFAULT)
- * on|any - use any configured protocol
- * dhcp|bootp|rarp - use only the specified protocol
- * both - use both BOOTP and RARP (not DHCP)
+ * command line parameter. See Documentation/nfsroot.txt.
*/
static int __init ic_proto_name(char *name)
{
return xt_compat_match_to_user(m, dstptr, size);
}
-static int compat_copy_entry_to_user(struct ipt_entry *e,
- void __user **dstptr, compat_uint_t *size)
+static int
+compat_copy_entry_to_user(struct ipt_entry *e, void __user **dstptr,
+ compat_uint_t *size, struct xt_counters *counters,
+ unsigned int *i)
{
struct ipt_entry_target *t;
struct compat_ipt_entry __user *ce;
if (copy_to_user(ce, e, sizeof(struct ipt_entry)))
goto out;
+ if (copy_to_user(&ce->counters, &counters[*i], sizeof(counters[*i])))
+ goto out;
+
*dstptr += sizeof(struct compat_ipt_entry);
ret = IPT_MATCH_ITERATE(e, compat_copy_match_to_user, dstptr, size);
target_offset = e->target_offset - (origsize - *size);
goto out;
if (put_user(next_offset, &ce->next_offset))
goto out;
+
+ (*i)++;
return 0;
out:
return ret;
static int compat_copy_entries_to_user(unsigned int total_size,
struct xt_table *table, void __user *userptr)
{
- unsigned int off, num;
- struct compat_ipt_entry e;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
void __user *pos;
unsigned int size;
int ret = 0;
void *loc_cpu_entry;
+ unsigned int i = 0;
counters = alloc_counters(table);
if (IS_ERR(counters))
pos = userptr;
size = total_size;
ret = IPT_ENTRY_ITERATE(loc_cpu_entry, total_size,
- compat_copy_entry_to_user, &pos, &size);
- if (ret)
- goto free_counters;
-
- /* ... then go back and fix counters and names */
- for (off = 0, num = 0; off < size; off += e.next_offset, num++) {
- unsigned int i;
- struct ipt_entry_match m;
- struct ipt_entry_target t;
+ compat_copy_entry_to_user,
+ &pos, &size, counters, &i);
- ret = -EFAULT;
- if (copy_from_user(&e, userptr + off,
- sizeof(struct compat_ipt_entry)))
- goto free_counters;
- if (copy_to_user(userptr + off +
- offsetof(struct compat_ipt_entry, counters),
- &counters[num], sizeof(counters[num])))
- goto free_counters;
-
- for (i = sizeof(struct compat_ipt_entry);
- i < e.target_offset; i += m.u.match_size) {
- if (copy_from_user(&m, userptr + off + i,
- sizeof(struct ipt_entry_match)))
- goto free_counters;
- if (copy_to_user(userptr + off + i +
- offsetof(struct ipt_entry_match, u.user.name),
- m.u.kernel.match->name,
- strlen(m.u.kernel.match->name) + 1))
- goto free_counters;
- }
-
- if (copy_from_user(&t, userptr + off + e.target_offset,
- sizeof(struct ipt_entry_target)))
- goto free_counters;
- if (copy_to_user(userptr + off + e.target_offset +
- offsetof(struct ipt_entry_target, u.user.name),
- t.u.kernel.target->name,
- strlen(t.u.kernel.target->name) + 1))
- goto free_counters;
- }
- ret = 0;
-free_counters:
vfree(counters);
return ret;
}
dataoff = ip_hdrlen(skb) + sizeof(struct udphdr);
- /* Get actual SDP lenght */
+ /* Get actual SDP length */
if (ct_sip_get_info(ct, dptr, skb->len - dataoff, &matchoff,
&matchlen, POS_SDP_HEADER) > 0) {
}
if (dst_metric(dst, RTAX_RTTVAR) > tp->mdev) {
tp->mdev = dst_metric(dst, RTAX_RTTVAR);
- tp->mdev_max = tp->rttvar = max(tp->mdev, TCP_RTO_MIN);
+ tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk));
}
tcp_set_rto(sk);
tcp_bound_rto(sk);
}
/* ... check padding bits here. Silly. :-) */
+ /* RFC4303: Drop dummy packets without any error */
+ if (nexthdr[1] == IPPROTO_NONE) {
+ ret = -EINVAL;
+ goto out;
+ }
+
pskb_trim(skb, skb->len - alen - padlen - 2);
ret = nexthdr[1];
}
break;
default:
- return -EINVAL;
+ return -ENOPROTOOPT;
}
len = min_t(unsigned int, sizeof(int), len);
if(put_user(len, optlen))
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
#ifdef CONFIG_NETFILTER
- /* we need to exclude all possible EINVALs except default case */
- if (err == -EINVAL && optname != IPV6_ADDRFORM &&
- optname != MCAST_MSFILTER) {
+ /* we need to exclude all possible ENOPROTOOPTs except default case */
+ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
int len;
if (get_user(len, optlen))
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
#ifdef CONFIG_NETFILTER
- /* we need to exclude all possible EINVALs except default case */
- if (err == -EINVAL && optname != IPV6_ADDRFORM &&
- optname != MCAST_MSFILTER) {
+ /* we need to exclude all possible ENOPROTOOPTs except default case */
+ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
int len;
if (get_user(len, optlen))
* optimistic addresses, but we may send the solicitation
* if we don't include the sllao. So here we check
* if our address is optimistic, and if so, we
- * supress the inclusion of the sllao.
+ * suppress the inclusion of the sllao.
*/
if (send_sllao) {
struct inet6_ifaddr *ifp = ipv6_get_ifaddr(saddr, dev, 1);
dst_prev->output = dst_prev->xfrm->outer_mode->afinfo->output;
/* Sheit... I remember I did this right. Apparently,
* it was magically lost, so this code needs audit */
- x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTCF_BROADCAST|RTCF_MULTICAST|RTCF_LOCAL);
+ x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTF_ANYCAST|RTF_LOCAL);
x->u.rt6.rt6i_metric = rt0->rt6i_metric;
x->u.rt6.rt6i_node = rt0->rt6i_node;
x->u.rt6.rt6i_gateway = rt0->rt6i_gateway;
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
- /* Poll parameters are always of lenght 0 (just a signal) */
+ /* Poll parameters are always of length 0 (just a signal) */
if (!get) {
/* Respond with DTE line settings */
ircomm_param_request(self, IRCOMM_DTE, TRUE);
if (dev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
- IRDA_WARNING("Promiscous mode not implemented by IrLAN!\n");
+ IRDA_WARNING("Promiscuous mode not implemented by IrLAN!\n");
}
else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
/* Disable promiscuous mode, use normal mode. */
frame->control = SNRM_CMD | PF_BIT;
/*
- * If we are establishing a connection then insert QoS paramerters
+ * If we are establishing a connection then insert QoS parameters
*/
if (qos) {
skb_put(tx_skb, 9); /* 25 left */
/* Final cleanup */
del_timer(&link->idle_timer);
link->magic = 0;
+ hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap);
kfree(link);
}
}
int err;
p.pi = pi; /* In case handler needs to know */
- p.pl = type & PV_MASK; /* The integer type codes the lenght as well */
+ p.pl = type & PV_MASK; /* The integer type codes the length as well */
p.pv.i = 0; /* Clear value */
/* Call handler for this parameter */
return err;
/*
- * If parameter lenght is still 0, then (1) this is an any length
+ * If parameter length is still 0, then (1) this is an any length
* integer, and (2) the handler function does not care which length
* we choose to use, so we pick the one the gives the fewest bytes.
*/
{
irda_param_t p;
int n = 0;
- int extract_len; /* Real lenght we extract */
+ int extract_len; /* Real length we extract */
int err;
p.pi = pi; /* In case handler needs to know */
- p.pl = buf[1]; /* Extract lenght of value */
+ p.pl = buf[1]; /* Extract length of value */
p.pv.i = 0; /* Clear value */
extract_len = p.pl; /* Default : extract all */
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
p.pi = pi; /* In case handler needs to know */
- p.pl = buf[1]; /* Extract lenght of value */
+ p.pl = buf[1]; /* Extract length of value */
IRDA_DEBUG(2, "%s(), pi=%#x, pl=%d\n", __FUNCTION__,
p.pi, p.pl);
irda_param_t p;
p.pi = pi; /* In case handler needs to know */
- p.pl = buf[1]; /* Extract lenght of value */
+ p.pl = buf[1]; /* Extract length of value */
/* Check if buffer is long enough for parsing */
if (len < (2+p.pl)) {
int n = 0;
IRDA_ASSERT(buf != NULL, return ret;);
- IRDA_ASSERT(info != 0, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
pi_minor = pi & info->pi_mask;
pi_major = pi >> info->pi_major_offset;
int n = 0;
IRDA_ASSERT(buf != NULL, return ret;);
- IRDA_ASSERT(info != 0, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
pi_minor = buf[n] & info->pi_mask;
pi_major = buf[n] >> info->pi_major_offset;
int n = 0;
IRDA_ASSERT(buf != NULL, return ret;);
- IRDA_ASSERT(info != 0, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
/*
* Parse all parameters. Each parameter must be at least two bytes
skb_reserve(newskb, 1);
if(docopy) {
- /* Copy data without CRC (lenght already checked) */
+ /* Copy data without CRC (length already checked) */
skb_copy_to_linear_data(newskb, rx_buff->data,
rx_buff->len - 2);
/* Deliver this skb */
static inline int aalg_tmpl_set(struct xfrm_tmpl *t, struct xfrm_algo_desc *d)
{
- return t->aalgos & (1 << d->desc.sadb_alg_id);
+ unsigned int id = d->desc.sadb_alg_id;
+
+ if (id >= sizeof(t->aalgos) * 8)
+ return 0;
+
+ return (t->aalgos >> id) & 1;
}
static inline int ealg_tmpl_set(struct xfrm_tmpl *t, struct xfrm_algo_desc *d)
{
- return t->ealgos & (1 << d->desc.sadb_alg_id);
+ unsigned int id = d->desc.sadb_alg_id;
+
+ if (id >= sizeof(t->ealgos) * 8)
+ return 0;
+
+ return (t->ealgos >> id) & 1;
}
static int count_ah_combs(struct xfrm_tmpl *t)
void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
- dev->header_ops = &ieee80211_header_ops;
dev->hard_start_xmit = ieee80211_subif_start_xmit;
dev->wireless_handlers = &ieee80211_iw_handler_def;
dev->set_multicast_list = ieee80211_set_multicast_list;
if (!strcmp(alg->ops->name, ops->name)) {
/* don't register an algorithm twice */
WARN_ON(1);
+ mutex_unlock(&rate_ctrl_mutex);
return -EALREADY;
}
}
list_for_each_entry(alg, &rate_ctrl_algs, list) {
if (alg->ops == ops) {
list_del(&alg->list);
+ kfree(alg);
break;
}
}
mutex_unlock(&rate_ctrl_mutex);
- kfree(alg);
}
EXPORT_SYMBOL(ieee80211_rate_control_unregister);
sta_info_put(sta);
}
if (disassoc) {
- union iwreq_data wrqu;
- memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
- mod_timer(&ifsta->timer, jiffies +
- IEEE80211_MONITORING_INTERVAL + 30 * HZ);
+ ifsta->state = IEEE80211_DISABLED;
+ ieee80211_set_associated(dev, ifsta, 0);
} else {
mod_timer(&ifsta->timer, jiffies +
IEEE80211_MONITORING_INTERVAL);
}
/* setup master conntrack: this is a confirmed expectation */
- if (master_ct)
+ if (master_ct) {
+ __set_bit(IPS_EXPECTED_BIT, &ct->status);
ct->master = master_ct;
+ }
add_timer(&ct->timeout);
nf_conntrack_hash_insert(ct);
}
};
-/* get line lenght until first CR or LF seen. */
+/* get line length until first CR or LF seen. */
int ct_sip_lnlen(const char *line, const char *limit)
{
const char *k = line;
return len;
}
-/* get digits lenght, skiping blank spaces. */
+/* get digits length, skipping blank spaces. */
static int skp_digits_len(struct nf_conn *ct, const char *dptr,
const char *limit, int *shift)
{
u_int16_t msize = m->u.user.match_size - off;
if (copy_to_user(cm, m, sizeof(*cm)) ||
- put_user(msize, &cm->u.user.match_size))
+ put_user(msize, &cm->u.user.match_size) ||
+ copy_to_user(cm->u.user.name, m->u.kernel.match->name,
+ strlen(m->u.kernel.match->name) + 1))
return -EFAULT;
if (match->compat_to_user) {
u_int16_t tsize = t->u.user.target_size - off;
if (copy_to_user(ct, t, sizeof(*ct)) ||
- put_user(tsize, &ct->u.user.target_size))
+ put_user(tsize, &ct->u.user.target_size) ||
+ copy_to_user(ct->u.user.name, t->u.kernel.target->name,
+ strlen(t->u.kernel.target->name) + 1))
return -EFAULT;
if (target->compat_to_user) {
static bool select_gc(const struct xt_hashlimit_htable *ht,
const struct dsthash_ent *he)
{
- return jiffies >= he->expires;
+ return time_after_eq(jiffies, he->expires);
}
static void htable_selective_cleanup(struct xt_hashlimit_htable *ht,
};
/*
- * NetLabel Misc Managment Functions
+ * NetLabel Misc Management Functions
*/
/**
/* Spoof incoming device */
skb->dev = dev;
- skb_reset_mac_header(skb);
+ skb->mac_header = skb->network_header;
skb_reset_network_header(skb);
skb->pkt_type = PACKET_HOST;
u64 cl_vtoff; /* inter-period cumulative vt offset */
u64 cl_cvtmax; /* max child's vt in the last period */
u64 cl_cvtoff; /* cumulative cvtmax of all periods */
- u64 cl_pcvtoff; /* parent's cvtoff at initalization
+ u64 cl_pcvtoff; /* parent's cvtoff at initialization
time */
struct internal_sc cl_rsc; /* internal real-time service curve */
sctp_addto_chunk(retval, sizeof(ecap_param), &ecap_param);
- /* Add the supported extensions paramter. Be nice and add this
+ /* Add the supported extensions parameter. Be nice and add this
* fist before addiding the parameters for the extensions themselves
*/
if (num_ext) {
chunk_len -= length;
/* Skip the address parameter and store a pointer to the first
- * asconf paramter.
+ * asconf parameter.
*/
length = ntohs(addr_param->v4.param_hdr.length);
asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
/* create an ASCONF_ACK chunk.
* Based on the definitions of parameters, we know that the size of
* ASCONF_ACK parameters are less than or equal to the twice of ASCONF
- * paramters.
+ * parameters.
*/
asconf_ack = sctp_make_asconf_ack(asoc, serial, chunk_len * 2);
if (!asconf_ack)
asconf_len -= length;
/* Skip the address parameter in the last asconf sent and store a
- * pointer to the first asconf paramter.
+ * pointer to the first asconf parameter.
*/
length = ntohs(addr_param->v4.param_hdr.length);
asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
struct sctp_ulpevent *);
static struct sctp_ulpevent * sctp_ulpq_order(struct sctp_ulpq *,
struct sctp_ulpevent *);
+static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq);
/* 1st Level Abstractions */
static int sctp_ulpq_clear_pd(struct sctp_ulpq *ulpq)
{
ulpq->pd_mode = 0;
+ sctp_ulpq_reasm_drain(ulpq);
return sctp_clear_pd(ulpq->asoc->base.sk, ulpq->asoc);
}
}
}
+/*
+ * Drain the reassembly queue. If we just cleared parted delivery, it
+ * is possible that the reassembly queue will contain already reassembled
+ * messages. Retrieve any such messages and give them to the user.
+ */
+static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq)
+{
+ struct sctp_ulpevent *event = NULL;
+ struct sk_buff_head temp;
+
+ if (skb_queue_empty(&ulpq->reasm))
+ return;
+
+ while ((event = sctp_ulpq_retrieve_reassembled(ulpq)) != NULL) {
+ /* Do ordering if needed. */
+ if ((event) && (event->msg_flags & MSG_EOR)){
+ skb_queue_head_init(&temp);
+ __skb_queue_tail(&temp, sctp_event2skb(event));
+
+ event = sctp_ulpq_order(ulpq, event);
+ }
+
+ /* Send event to the ULP. 'event' is the
+ * sctp_ulpevent for very first SKB on the temp' list.
+ */
+ if (event)
+ sctp_ulpq_tail_event(ulpq, event);
+ }
+}
+
+
/* Helper function to gather skbs that have possibly become
* ordered by an an incoming chunk.
*/
seg[n].mr_page = NULL;
seg[n].mr_offset = xdrbuf->head[0].iov_base;
seg[n].mr_len = xdrbuf->head[0].iov_len;
- pos += xdrbuf->head[0].iov_len;
++n;
}
seg[n].mr_len = min_t(u32,
PAGE_SIZE - xdrbuf->page_base, xdrbuf->page_len);
len = xdrbuf->page_len - seg[n].mr_len;
- pos += len;
++n;
p = 1;
while (len > 0) {
}
}
- if (pos < xdrbuf->len && xdrbuf->tail[0].iov_len) {
+ if (xdrbuf->tail[0].iov_len) {
if (n == nsegs)
return 0;
seg[n].mr_page = NULL;
seg[n].mr_offset = xdrbuf->tail[0].iov_base;
seg[n].mr_len = xdrbuf->tail[0].iov_len;
- pos += xdrbuf->tail[0].iov_len;
++n;
}
- if (pos < xdrbuf->len)
- dprintk("RPC: %s: marshaled only %d of %d\n",
- __func__, pos, xdrbuf->len);
-
return n;
}
dbg("sock_delete: %x\n",tsock);
if (!tsock)
return 0;
- down_interruptible(&tsock->sem);
+ down(&tsock->sem);
if (!sock->sk) {
up(&tsock->sem);
return 0;
if (sk && sk->sk_policy[XFRM_POLICY_OUT]) {
policy = xfrm_sk_policy_lookup(sk, XFRM_POLICY_OUT, fl);
+ err = PTR_ERR(policy);
if (IS_ERR(policy))
- return PTR_ERR(policy);
+ goto dropdst;
}
if (!policy) {
policy = flow_cache_lookup(fl, dst_orig->ops->family,
dir, xfrm_policy_lookup);
+ err = PTR_ERR(policy);
if (IS_ERR(policy))
- return PTR_ERR(policy);
+ goto dropdst;
}
if (!policy)
return 0;
error:
- dst_release(dst_orig);
xfrm_pols_put(pols, npols);
+dropdst:
+ dst_release(dst_orig);
*dst_p = NULL;
return err;
}
if (audit_enabled == 0)
return;
- audit_buf = xfrm_audit_start(sid, auid);
+ audit_buf = xfrm_audit_start(auid, sid);
if (audit_buf == NULL)
return;
audit_log_format(audit_buf, " op=SPD-add res=%u", result);
if (audit_enabled == 0)
return;
- audit_buf = xfrm_audit_start(sid, auid);
+ audit_buf = xfrm_audit_start(auid, sid);
if (audit_buf == NULL)
return;
audit_log_format(audit_buf, " op=SPD-delete res=%u", result);
xfrm_audit_state_add(struct xfrm_state *x, int result, u32 auid, u32 sid)
{
struct audit_buffer *audit_buf;
+ u32 spi;
extern int audit_enabled;
if (audit_enabled == 0)
return;
- audit_buf = xfrm_audit_start(sid, auid);
+ audit_buf = xfrm_audit_start(auid, sid);
if (audit_buf == NULL)
return;
audit_log_format(audit_buf, " op=SAD-add res=%u",result);
xfrm_audit_common_stateinfo(x, audit_buf);
- audit_log_format(audit_buf, " spi=%lu(0x%lx)",
- (unsigned long)x->id.spi, (unsigned long)x->id.spi);
+ spi = ntohl(x->id.spi);
+ audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi);
audit_log_end(audit_buf);
}
EXPORT_SYMBOL_GPL(xfrm_audit_state_add);
xfrm_audit_state_delete(struct xfrm_state *x, int result, u32 auid, u32 sid)
{
struct audit_buffer *audit_buf;
+ u32 spi;
extern int audit_enabled;
if (audit_enabled == 0)
return;
- audit_buf = xfrm_audit_start(sid, auid);
+ audit_buf = xfrm_audit_start(auid, sid);
if (audit_buf == NULL)
return;
audit_log_format(audit_buf, " op=SAD-delete res=%u",result);
xfrm_audit_common_stateinfo(x, audit_buf);
- audit_log_format(audit_buf, " spi=%lu(0x%lx)",
- (unsigned long)x->id.spi, (unsigned long)x->id.spi);
+ spi = ntohl(x->id.spi);
+ audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi);
audit_log_end(audit_buf);
}
EXPORT_SYMBOL_GPL(xfrm_audit_state_delete);
for l in os.popen("nm --size-sort " + file).readlines():
size, type, name = l[:-1].split()
if type in "tTdDbB":
- if "." in name: name = "static." + name.split(".")[0]
+ # function names begin with '.' on 64-bit powerpc
+ if "." in name[1:]: name = "static." + name.split(".")[0]
sym[name] = sym.get(name, 0) + int(size, 16)
return sym
test ! -r $2/Makefile -o -O $2/Makefile || exit 0
# Only overwrite automatically generated Makefiles
# (so we do not overwrite kernel Makefile)
-if ! grep -q Automatically $2/Makefile
+if test -e $2/Makefile && ! grep -q Automatically $2/Makefile
then
exit 0
fi
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* PXA27x Developers Manual section 13.5.2.2.1 */
- pxa_set_cken(1 << 31, 1);
+ pxa_set_cken(CKEN_AC97CONF, 1);
udelay(5);
- pxa_set_cken(1 << 31, 0);
+ pxa_set_cken(CKEN_AC97CONF, 0);
GCR = GCR_COLD_RST;
udelay(50);
#else
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* PXA27x Developers Manual section 13.5.2.2.1 */
- pxa_set_cken(31, 1);
+ pxa_set_cken(CKEN_AC97CONF, 1);
udelay(5);
- pxa_set_cken(31, 0);
+ pxa_set_cken(CKEN_AC97CONF, 0);
GCR = GCR_COLD_RST;
udelay(50);
#else
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff