Blackfin arch: move hard coded pin_req to board file

Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time

 - move this static things to the blackfin board file
 - add pin_req array to struct bfin5xx_spi_master
 - tested on BF537/BF548 with SPI flash

Signed-off-by: Bryan Wu <bryan.wu@analog.com>

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bf1bedc..88b41b7 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -46,6 +46,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
 #include <asm/nand.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -562,6 +563,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index b941550..fe2634b 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -43,6 +43,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -269,6 +270,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a863522..97e03d5 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -38,6 +38,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -175,6 +176,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 34b6392..b236955 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -187,6 +188,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 62ffa50..60b0310 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -42,6 +42,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -286,6 +287,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 2915931..18bda54 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -194,6 +195,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 255da7a..ed0d26a 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -44,6 +44,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -513,6 +514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 87b8089..3c72fc3 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -40,6 +40,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 #include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
@@ -413,6 +414,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 5f7b91f..3bd0dad 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -44,6 +44,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -513,6 +514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 6b6490e..2d30906 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -42,6 +42,7 @@
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
+#include <asm/portmux.h>
 #include <asm/mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -453,9 +454,10 @@ static struct resource bfin_spi1_resource[] = {
 };
 
 /* SPI controller data */
-static struct bfin5xx_spi_master bf54x_spi_master_info = {
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bf54x_spi_master0 = {
@@ -464,17 +466,23 @@ static struct platform_device bf54x_spi_master0 = {
        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
        .resource = bfin_spi0_resource,
        .dev = {
-               .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+               .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
                },
 };
 
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+       .num_chipselect = 8,
+       .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
 static struct platform_device bf54x_spi_master1 = {
        .name = "bfin-spi",
        .id = 1, /* Bus number */
        .num_resources = ARRAY_SIZE(bfin_spi1_resource),
        .resource = bfin_spi1_resource,
        .dev = {
-               .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+               .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
                },
 };
 #endif  /* spi master and devices */

diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 97aeb43..9e46b52 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -38,6 +38,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -182,6 +183,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {

diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 059d516..6434ca2 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,6 +35,7 @@
 #include <linux/pata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -160,6 +161,7 @@ static struct resource bfin_spi0_resource[] = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {