M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
+ARM/NOMADIK ARCHITECTURE
+M: Alessandro Rubini <rubini@unipv.it>
+M: STEricsson <STEricsson_nomadik_linux@list.st.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-nomadik/
+F: arch/arm/plat-nomadik/
+
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
# define __SWAB_64_THRU_32__
#endif
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ __asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__u32 t;
#endif
+#endif
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c) __raw_readb(c)
-#define readw(c) __raw_readw(c)
-#define readl(c) __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l) __raw_readsb(p, d, l)
-#define readsw(p, d, l) __raw_readsw(p, d, l)
-#define readsl(p, d, l) __raw_readsl(p, d, l)
-
-#define writeb(v, c) __raw_writeb(v, c)
-#define writew(v, c) __raw_writew(v, c)
-#define writel(v, c) __raw_writel(v, c)
-
-#define writesb(p, d, l) __raw_writesb(p, d, l)
-#define writesw(p, d, l) __raw_writesw(p, d, l)
-#define writesl(p, d, l) __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l) _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
l2x0_base = base;
- /* disable L2X0 */
- writel(0, l2x0_base + L2X0_CTRL);
+ /*
+ * Check if l2x0 controller is already enabled.
+ * If you are booting from non-secure mode
+ * accessing the below registers will fault.
+ */
+ if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
- aux = readl(l2x0_base + L2X0_AUX_CTRL);
- aux &= aux_mask;
- aux |= aux_val;
- writel(aux, l2x0_base + L2X0_AUX_CTRL);
+ /* l2x0 controller is disabled */
- l2x0_inv_all();
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+ writel(aux, l2x0_base + L2X0_AUX_CTRL);
- /* enable L2X0 */
- writel(1, l2x0_base + L2X0_CTRL);
+ l2x0_inv_all();
+
+ /* enable L2X0 */
+ writel(1, l2x0_base + L2X0_CTRL);
+ }
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;