[MIPS] IP22: Fix broken eeprom access by using __raw_readl/__raw_writel

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index e19d60d..0177566 100644 (file)
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -32,19 +32,19 @@
        for (x=0; x<100000; x++) __asm__ __volatile__(""); })
 
 #define eeprom_cs_on(ptr) ({   \
-       *ptr &= ~EEPROM_DATO;   \
-       *ptr &= ~EEPROM_ECLK;   \
-       *ptr &= ~EEPROM_EPROT;  \
-       delay();                \
-       *ptr |= EEPROM_CSEL;    \
-       *ptr |= EEPROM_ECLK; })
+       __raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr);     \
+       __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);     \
+       __raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr);    \
+       delay();                                                \
+       __raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr);      \
+       __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
 
 #define eeprom_cs_off(ptr) ({  \
-       *ptr &= ~EEPROM_ECLK;   \
-       *ptr &= ~EEPROM_CSEL;   \
-       *ptr |= EEPROM_EPROT;   \
-       *ptr |= EEPROM_ECLK; })
+       __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);     \
+       __raw_writel(__raw_readl(ptr) & ~EEPROM_CSEL, ptr);     \
+       __raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr);     \
+       __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
 #define        BITS_IN_COMMAND 11
 /*
@@ -60,15 +60,17 @@ static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg)
        ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
        for (i = 0; i < BITS_IN_COMMAND; i++) {
                if (ser_cmd & (1<<15))  /* if high order bit set */
-                       writel(readl(ctrl) | EEPROM_DATO, ctrl);
+                       __raw_writel(__raw_readl(ctrl) | EEPROM_DATO, ctrl);
                else
-                       writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
-               writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
-               writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+                       __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
+               __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
+               delay();
+               __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
+               delay();
                ser_cmd <<= 1;
        }
        /* see data sheet timing diagram */
-       writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+       __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
 }
 
 unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
@@ -76,18 +78,18 @@ unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
        unsigned short res = 0;
        int i;
 
-       writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
+       __raw_writel(__raw_readl(ctrl) & ~EEPROM_EPROT, ctrl);
        eeprom_cs_on(ctrl);
        eeprom_cmd(ctrl, EEPROM_READ, reg);
 
        /* clock the data ouf of serial mem */
        for (i = 0; i < 16; i++) {
-               writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+               __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
                delay();
-               writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+               __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
                delay();
                res <<= 1;
-               if (readl(ctrl) & EEPROM_DATI)
+               if (__raw_readl(ctrl) & EEPROM_DATI)
                        res |= 1;
        }