at76c50x-usb: clean up DMA on stack
authorJason Andryuk <jandryuk@gmail.com>
Sat, 21 Feb 2009 07:53:22 +0000 (09:53 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 27 Feb 2009 19:53:01 +0000 (14:53 -0500)
Cleanup dma on stack issues:

- no DMA on stack
- cleanup unclear endianness issue

Corrected version of Oliver Neukum's original patch for at76_usb.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/at76c50x-usb.c

index c79591e..46ac9e2 100644 (file)
@@ -580,18 +580,25 @@ static int at76_remap(struct usb_device *udev)
 static int at76_get_op_mode(struct usb_device *udev)
 {
        int ret;
-       u8 op_mode;
+       u8 saved;
+       u8 *op_mode;
 
+       op_mode = kmalloc(1, GFP_NOIO);
+       if (!op_mode)
+               return -ENOMEM;
        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
                              USB_TYPE_VENDOR | USB_DIR_IN |
-                             USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1,
+                             USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
                              USB_CTRL_GET_TIMEOUT);
+       saved = *op_mode;
+       kfree(op_mode);
+
        if (ret < 0)
                return ret;
        else if (ret < 1)
                return -EIO;
        else
-               return op_mode;
+               return saved;
 }
 
 /* Load a block of the second ("external") part of the firmware */
@@ -704,21 +711,25 @@ static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
 /* Return positive number for status, negative for an error */
 static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
 {
-       u8 stat_buf[40];
+       u8 *stat_buf;
        int ret;
 
+       stat_buf = kmalloc(40, GFP_NOIO);
+       if (!stat_buf)
+               return -ENOMEM;
+
        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
-                             USB_TYPE_VENDOR | USB_DIR_IN |
-                             USB_RECIP_INTERFACE, cmd, 0, stat_buf,
-                             sizeof(stat_buf), USB_CTRL_GET_TIMEOUT);
-       if (ret < 0)
-               return ret;
+                       USB_TYPE_VENDOR | USB_DIR_IN |
+                       USB_RECIP_INTERFACE, cmd, 0, stat_buf,
+                       40, USB_CTRL_GET_TIMEOUT);
+       if (ret >= 0)
+               ret = stat_buf[5];
+       kfree(stat_buf);
 
-       return stat_buf[5];
+       return ret;
 }
 
 #define MAKE_CMD_CASE(c) case (c): return #c
-
 static const char *at76_get_cmd_string(u8 cmd_status)
 {
        switch (cmd_status) {
@@ -735,7 +746,7 @@ static const char *at76_get_cmd_string(u8 cmd_status)
        return "UNKNOWN";
 }
 
-static int at76_set_card_command(struct usb_device *udev, int cmd, void *buf,
+static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
                                 int buf_size)
 {
        int ret;