[SCSI] qla2xxx: Cruft cleanup of functions and structures.
authorAndrew Vasquez <andrew.vasquez@qlogic.com>
Thu, 3 Apr 2008 20:13:20 +0000 (13:13 -0700)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Mon, 7 Apr 2008 17:19:14 +0000 (12:19 -0500)
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless
wrappers, and unused DPC flags from the code.  Another step in
the migration towards a cleaner (less-crusty) driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/qla2xxx/qla_dbg.c
drivers/scsi/qla2xxx/qla_dbg.h
drivers/scsi/qla2xxx/qla_def.h
drivers/scsi/qla2xxx/qla_gbl.h
drivers/scsi/qla2xxx/qla_gs.c
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_inline.h
drivers/scsi/qla2xxx/qla_iocb.c
drivers/scsi/qla2xxx/qla_isr.c
drivers/scsi/qla2xxx/qla_mid.c
drivers/scsi/qla2xxx/qla_os.c

index 83dd68b..9d12d9f 100644 (file)
@@ -1410,125 +1410,3 @@ qla2x00_dump_buffer(uint8_t * b, uint32_t size)
        if (cnt % 16)
                printk("\n");
 }
-
-/**************************************************************************
- *   qla2x00_print_scsi_cmd
- *      Dumps out info about the scsi cmd and srb.
- *   Input
- *      cmd : struct scsi_cmnd
- **************************************************************************/
-void
-qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd)
-{
-       int i;
-       struct scsi_qla_host *ha;
-       srb_t *sp;
-
-       ha = shost_priv(cmd->device->host);
-
-       sp = (srb_t *) cmd->SCp.ptr;
-       printk("SCSI Command @=0x%p, Handle=0x%p\n", cmd, cmd->host_scribble);
-       printk("  chan=0x%02x, target=0x%02x, lun=0x%02x, cmd_len=0x%02x\n",
-           cmd->device->channel, cmd->device->id, cmd->device->lun,
-           cmd->cmd_len);
-       printk(" CDB: ");
-       for (i = 0; i < cmd->cmd_len; i++) {
-               printk("0x%02x ", cmd->cmnd[i]);
-       }
-       printk("\n  seg_cnt=%d, allowed=%d, retries=%d\n",
-              scsi_sg_count(cmd), cmd->allowed, cmd->retries);
-       printk("  request buffer=0x%p, request buffer len=0x%x\n",
-              scsi_sglist(cmd), scsi_bufflen(cmd));
-       printk("  tag=%d, transfersize=0x%x\n",
-           cmd->tag, cmd->transfersize);
-       printk("  serial_number=%lx, SP=%p\n", cmd->serial_number, sp);
-       printk("  data direction=%d\n", cmd->sc_data_direction);
-
-       if (!sp)
-               return;
-
-       printk("  sp flags=0x%x\n", sp->flags);
-}
-
-#if defined(QL_DEBUG_ROUTINES)
-/*
- * qla2x00_formatted_dump_buffer
- *       Prints string plus buffer.
- *
- * Input:
- *       string  = Null terminated string (no newline at end).
- *       buffer  = buffer address.
- *       wd_size = word size 8, 16, 32 or 64 bits
- *       count   = number of words.
- */
-void
-qla2x00_formatted_dump_buffer(char *string, uint8_t * buffer,
-                               uint8_t wd_size, uint32_t count)
-{
-       uint32_t cnt;
-       uint16_t *buf16;
-       uint32_t *buf32;
-
-       if (strcmp(string, "") != 0)
-               printk("%s\n",string);
-
-       switch (wd_size) {
-               case 8:
-                       printk(" 0    1    2    3    4    5    6    7    "
-                               "8    9    Ah   Bh   Ch   Dh   Eh   Fh\n");
-                       printk("-----------------------------------------"
-                               "-------------------------------------\n");
-
-                       for (cnt = 1; cnt <= count; cnt++, buffer++) {
-                               printk("%02x",*buffer);
-                               if (cnt % 16 == 0)
-                                       printk("\n");
-                               else
-                                       printk("  ");
-                       }
-                       if (cnt % 16 != 0)
-                               printk("\n");
-                       break;
-               case 16:
-                       printk("   0      2      4      6      8      Ah "
-                               "       Ch     Eh\n");
-                       printk("-----------------------------------------"
-                               "-------------\n");
-
-                       buf16 = (uint16_t *) buffer;
-                       for (cnt = 1; cnt <= count; cnt++, buf16++) {
-                               printk("%4x",*buf16);
-
-                               if (cnt % 8 == 0)
-                                       printk("\n");
-                               else if (*buf16 < 10)
-                                       printk("   ");
-                               else
-                                       printk("  ");
-                       }
-                       if (cnt % 8 != 0)
-                               printk("\n");
-                       break;
-               case 32:
-                       printk("       0          4          8          Ch\n");
-                       printk("------------------------------------------\n");
-
-                       buf32 = (uint32_t *) buffer;
-                       for (cnt = 1; cnt <= count; cnt++, buf32++) {
-                               printk("%8x", *buf32);
-
-                               if (cnt % 4 == 0)
-                                       printk("\n");
-                               else if (*buf32 < 10)
-                                       printk("   ");
-                               else
-                                       printk("  ");
-                       }
-                       if (cnt % 4 != 0)
-                               printk("\n");
-                       break;
-               default:
-                       break;
-       }
-}
-#endif
index c30f2fa..2a4043b 100644 (file)
 /* #define QL_DEBUG_LEVEL_13 */ /* Output fdmi function trace msgs */
 /* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */
 /* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */
-/*
- *  Local Macro Definitions.
- */
-#if defined(QL_DEBUG_LEVEL_1)  || defined(QL_DEBUG_LEVEL_2) || \
-    defined(QL_DEBUG_LEVEL_3)  || defined(QL_DEBUG_LEVEL_4) || \
-    defined(QL_DEBUG_LEVEL_5)  || defined(QL_DEBUG_LEVEL_6) || \
-    defined(QL_DEBUG_LEVEL_7)  || defined(QL_DEBUG_LEVEL_8) || \
-    defined(QL_DEBUG_LEVEL_9)  || defined(QL_DEBUG_LEVEL_10) || \
-    defined(QL_DEBUG_LEVEL_11) || defined(QL_DEBUG_LEVEL_12) || \
-    defined(QL_DEBUG_LEVEL_13) || defined(QL_DEBUG_LEVEL_14) || \
-    defined(QL_DEBUG_LEVEL_15)
-    #define QL_DEBUG_ROUTINES
-#endif
 
 /*
 * Macros use for debugging the driver.
index 13ffeda..047973f 100644 (file)
@@ -2449,8 +2449,6 @@ typedef struct scsi_qla_host {
 #define  MBX_TIMEDOUT          BIT_5
 #define  MBX_ACCESS_TIMEDOUT   BIT_6
 
-       mbx_cmd_t       mc;
-
        /* Basic firmware related information. */
        uint16_t        fw_major_version;
        uint16_t        fw_minor_version;
index 276bd26..10c3f90 100644 (file)
@@ -38,9 +38,6 @@ extern int qla2x00_loop_resync(scsi_qla_host_t *);
 extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
 extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
 
-extern void qla2x00_restart_queues(scsi_qla_host_t *, uint8_t);
-
-extern void qla2x00_rescan_fcports(scsi_qla_host_t *);
 extern void qla2x00_update_fcports(scsi_qla_host_t *);
 
 extern int qla2x00_abort_isp(scsi_qla_host_t *);
@@ -312,7 +309,6 @@ extern void qla24xx_fw_dump(scsi_qla_host_t *, int);
 extern void qla25xx_fw_dump(scsi_qla_host_t *, int);
 extern void qla2x00_dump_regs(scsi_qla_host_t *);
 extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
-extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *);
 
 /*
  * Global Function Prototypes in qla_gs.c source file.
index ea8a7d3..e6578ce 100644 (file)
@@ -6,12 +6,6 @@
  */
 #include "qla_def.h"
 
-static inline struct ct_sns_req *
-qla2x00_prep_ct_req(struct ct_sns_req *, uint16_t, uint16_t);
-
-static inline struct sns_cmd_pkt *
-qla2x00_prep_sns_cmd(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
-
 static int qla2x00_sns_ga_nxt(scsi_qla_host_t *, fc_port_t *);
 static int qla2x00_sns_gid_pt(scsi_qla_host_t *, sw_info_t *);
 static int qla2x00_sns_gpn_id(scsi_qla_host_t *, sw_info_t *);
index e9a7c2d..d429e2f 100644 (file)
 #include <asm/prom.h>
 #endif
 
-/* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
-#ifndef EXT_IS_LUN_BIT_SET
-#define EXT_IS_LUN_BIT_SET(P,L) \
-    (((P)->mask[L/8] & (0x80 >> (L%8)))?1:0)
-#define EXT_SET_LUN_BIT(P,L) \
-    ((P)->mask[L/8] |= (0x80 >> (L%8)))
-#endif
-
 /*
 *  QLogic ISP2x00 Hardware Support Function Prototypes.
 */
@@ -2176,20 +2168,6 @@ cleanup_allocation:
 }
 
 static void
-qla2x00_probe_for_all_luns(scsi_qla_host_t *ha)
-{
-       fc_port_t       *fcport;
-
-       qla2x00_mark_all_devices_lost(ha, 0);
-       list_for_each_entry(fcport, &ha->fcports, list) {
-               if (fcport->port_type != FCT_TARGET)
-                       continue;
-
-               qla2x00_update_fcport(ha, fcport);
-       }
-}
-
-static void
 qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
 {
 #define LS_UNKNOWN      2
@@ -3200,25 +3178,6 @@ qla2x00_loop_resync(scsi_qla_host_t *ha)
 }
 
 void
-qla2x00_rescan_fcports(scsi_qla_host_t *ha)
-{
-       int rescan_done;
-       fc_port_t *fcport;
-
-       rescan_done = 0;
-       list_for_each_entry(fcport, &ha->fcports, list) {
-               if ((fcport->flags & FCF_RESCAN_NEEDED) == 0)
-                       continue;
-
-               qla2x00_update_fcport(ha, fcport);
-               fcport->flags &= ~FCF_RESCAN_NEEDED;
-
-               rescan_done = 1;
-       }
-       qla2x00_probe_for_all_luns(ha);
-}
-
-void
 qla2x00_update_fcports(scsi_qla_host_t *ha)
 {
        fc_port_t *fcport;
index 3e57a3e..e9bae27 100644 (file)
@@ -5,7 +5,6 @@
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 
-static __inline__ uint16_t qla2x00_debounce_register(volatile uint16_t __iomem *);
 /*
  * qla2x00_debounce_register
  *      Debounce register.
@@ -32,94 +31,12 @@ qla2x00_debounce_register(volatile uint16_t __iomem *addr)
        return (first);
 }
 
-static __inline__ int qla2x00_normalize_dma_addr(
-    dma_addr_t *e_addr,  uint32_t *e_len,
-    dma_addr_t *ne_addr, uint32_t *ne_len);
-
-/**
- * qla2x00_normalize_dma_addr() - Normalize an DMA address.
- * @e_addr: Raw DMA address
- * @e_len: Raw DMA length
- * @ne_addr: Normalized second DMA address
- * @ne_len: Normalized second DMA length
- *
- * If the address does not span a 4GB page boundary, the contents of @ne_addr
- * and @ne_len are undefined.  @e_len is updated to reflect a normalization.
- *
- * Example:
- *
- *     ffffabc0ffffeeee        (e_addr) start of DMA address
- *     0000000020000000        (e_len)  length of DMA transfer
- *     ffffabc11fffeeed        end of DMA transfer
- *
- * Is the 4GB boundary crossed?
- *
- *     ffffabc0ffffeeee        (e_addr)
- *     ffffabc11fffeeed        (e_addr + e_len - 1)
- *     00000001e0000003        ((e_addr ^ (e_addr + e_len - 1))
- *     0000000100000000        ((e_addr ^ (e_addr + e_len - 1)) & ~(0xffffffff)
- *
- * Compute start of second DMA segment:
- *
- *     ffffabc0ffffeeee        (e_addr)
- *     ffffabc1ffffeeee        (0x100000000 + e_addr)
- *     ffffabc100000000        (0x100000000 + e_addr) & ~(0xffffffff)
- *     ffffabc100000000        (ne_addr)
- *
- * Compute length of second DMA segment:
- *
- *     00000000ffffeeee        (e_addr & 0xffffffff)
- *     0000000000001112        (0x100000000 - (e_addr & 0xffffffff))
- *     000000001fffeeee        (e_len - (0x100000000 - (e_addr & 0xffffffff))
- *     000000001fffeeee        (ne_len)
- *
- * Adjust length of first DMA segment
- *
- *     0000000020000000        (e_len)
- *     0000000000001112        (e_len - ne_len)
- *     0000000000001112        (e_len)
- *
- * Returns non-zero if the specified address was normalized, else zero.
- */
-static __inline__ int
-qla2x00_normalize_dma_addr(
-    dma_addr_t *e_addr,  uint32_t *e_len,
-    dma_addr_t *ne_addr, uint32_t *ne_len)
-{
-       int normalized;
-
-       normalized = 0;
-       if ((*e_addr ^ (*e_addr + *e_len - 1)) & ~(0xFFFFFFFFULL)) {
-               /* Compute normalized crossed address and len */
-               *ne_addr = (0x100000000ULL + *e_addr) & ~(0xFFFFFFFFULL);
-               *ne_len = *e_len - (0x100000000ULL - (*e_addr & 0xFFFFFFFFULL));
-               *e_len -= *ne_len;
-
-               normalized++;
-       }
-       return (normalized);
-}
-
-static __inline__ void qla2x00_poll(scsi_qla_host_t *);
 static inline void
 qla2x00_poll(scsi_qla_host_t *ha)
 {
        ha->isp_ops->intr_handler(0, ha);
 }
 
-static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *);
-/*
- * This routine will wait for fabric devices for
- * the reset delay.
- */
-static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha)
-{
-       uint16_t        fw_state;
-
-       qla2x00_get_firmware_state(ha, &fw_state);
-}
-
-static __inline__ scsi_qla_host_t * to_qla_parent(scsi_qla_host_t *);
 static __inline__ scsi_qla_host_t *
 to_qla_parent(scsi_qla_host_t *ha)
 {
@@ -152,7 +69,6 @@ qla2x00_issue_marker(scsi_qla_host_t *ha, int ha_locked)
        return (QLA_SUCCESS);
 }
 
-static inline uint8_t *host_to_fcp_swap(uint8_t *, uint32_t);
 static inline uint8_t *
 host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
 {
@@ -166,7 +82,6 @@ host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
        return fcp;
 }
 
-static inline int qla2x00_is_reserved_id(scsi_qla_host_t *, uint16_t);
 static inline int
 qla2x00_is_reserved_id(scsi_qla_host_t *ha, uint16_t loop_id)
 {
index 9192ad5..5489d50 100644 (file)
@@ -11,9 +11,6 @@
 
 #include <scsi/scsi_tcq.h>
 
-static inline uint16_t qla2x00_get_cmd_direction(struct scsi_cmnd *cmd);
-static inline cont_entry_t *qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *);
-static inline cont_a64_entry_t *qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *);
 static request_t *qla2x00_req_pkt(scsi_qla_host_t *ha);
 static void qla2x00_isp_cmd(scsi_qla_host_t *ha);
 
index 0884642..e886000 100644 (file)
@@ -14,9 +14,6 @@ static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t);
 static void qla2x00_status_entry(scsi_qla_host_t *, void *);
 static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
 static void qla2x00_error_entry(scsi_qla_host_t *, sts_entry_t *);
-static void qla2x00_ms_entry(scsi_qla_host_t *, ms_iocb_entry_t *);
-
-static void qla24xx_ms_entry(scsi_qla_host_t *, struct ct_entry_24xx *);
 
 /**
  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
@@ -809,9 +806,6 @@ qla2x00_process_response_queue(struct scsi_qla_host *ha)
                case STATUS_CONT_TYPE:
                        qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
                        break;
-               case MS_IOCB_TYPE:
-                       qla2x00_ms_entry(ha, (ms_iocb_entry_t *)pkt);
-                       break;
                default:
                        /* Type Not Supported. */
                        DEBUG4(printk(KERN_WARNING
@@ -1346,44 +1340,6 @@ qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
 }
 
 /**
- * qla2x00_ms_entry() - Process a Management Server entry.
- * @ha: SCSI driver HA context
- * @index: Response queue out pointer
- */
-static void
-qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
-{
-       srb_t          *sp;
-
-       DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
-           __func__, ha->host_no, pkt, pkt->handle1));
-
-       /* Validate handle. */
-       if (pkt->handle1 < MAX_OUTSTANDING_COMMANDS)
-               sp = ha->outstanding_cmds[pkt->handle1];
-       else
-               sp = NULL;
-
-       if (sp == NULL) {
-               DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
-                   ha->host_no));
-               qla_printk(KERN_WARNING, ha, "MS entry - invalid handle\n");
-
-               set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
-               return;
-       }
-
-       CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->status);
-       CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
-
-       /* Free outstanding command slot. */
-       ha->outstanding_cmds[pkt->handle1] = NULL;
-
-       qla2x00_sp_compl(ha, sp);
-}
-
-
-/**
  * qla24xx_mbx_completion() - Process mailbox command completions.
  * @ha: SCSI driver HA context
  * @mb0: Mailbox0 register
@@ -1455,9 +1411,6 @@ qla24xx_process_response_queue(struct scsi_qla_host *ha)
                case STATUS_CONT_TYPE:
                        qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
                        break;
-               case MS_IOCB_TYPE:
-                       qla24xx_ms_entry(ha, (struct ct_entry_24xx *)pkt);
-                       break;
                case VP_RPT_ID_IOCB_TYPE:
                        qla24xx_report_id_acquisition(ha,
                            (struct vp_rpt_id_entry_24xx *)pkt);
@@ -1619,49 +1572,6 @@ qla24xx_intr_handler(int irq, void *dev_id)
        return IRQ_HANDLED;
 }
 
-/**
- * qla24xx_ms_entry() - Process a Management Server entry.
- * @ha: SCSI driver HA context
- * @index: Response queue out pointer
- */
-static void
-qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
-{
-       srb_t          *sp;
-
-       DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
-           __func__, ha->host_no, pkt, pkt->handle));
-
-       DEBUG9(printk("%s: ct pkt dump:\n", __func__));
-       DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx)));
-
-       /* Validate handle. */
-       if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
-               sp = ha->outstanding_cmds[pkt->handle];
-       else
-               sp = NULL;
-
-       if (sp == NULL) {
-               DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
-                   ha->host_no));
-               DEBUG10(printk("scsi(%ld): MS entry - invalid handle\n",
-                   ha->host_no));
-               qla_printk(KERN_WARNING, ha, "MS entry - invalid handle %d\n",
-                   pkt->handle);
-
-               set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
-               return;
-       }
-
-       CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->comp_status);
-       CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
-
-       /* Free outstanding command slot. */
-       ha->outstanding_cmds[pkt->handle] = NULL;
-
-       qla2x00_sp_compl(ha, sp);
-}
-
 static irqreturn_t
 qla24xx_msix_rsp_q(int irq, void *dev_id)
 {
index 5305ec1..9f48cd4 100644 (file)
@@ -16,8 +16,6 @@
 #include <scsi/scsicam.h>
 #include <linux/delay.h>
 
-void qla2x00_vp_stop_timer(scsi_qla_host_t *);
-
 void
 qla2x00_vp_stop_timer(scsi_qla_host_t *vha)
 {
index 3d29041..c0f6f66 100644 (file)
@@ -26,9 +26,6 @@ char qla2x00_version_str[40];
  */
 static struct kmem_cache *srb_cachep;
 
-/*
- * Ioctl related information.
- */
 int num_hosts;
 int ql2xlogintimeout = 20;
 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
@@ -105,7 +102,6 @@ static int qla2xxx_eh_abort(struct scsi_cmnd *);
 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
-static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
 
 static int qla2x00_change_queue_depth(struct scsi_device *, int);
 static int qla2x00_change_queue_type(struct scsi_device *, int);
@@ -685,7 +681,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 
                DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
                    __func__, ha->host_no, sp, serial));
-               DEBUG3(qla2x00_print_scsi_cmd(cmd));
 
                spin_unlock_irqrestore(&pha->hardware_lock, flags);
                if (ha->isp_ops->abort_command(ha, sp)) {
@@ -814,7 +809,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
                goto eh_dev_reset_done;
 
        if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
-               if (qla2x00_device_reset(ha, fcport) == 0)
+               if (ha->isp_ops->abort_target(fcport) == 0)
                        ret = SUCCESS;
        } else {
                DEBUG2(printk(KERN_INFO
@@ -1071,7 +1066,7 @@ qla2x00_loop_reset(scsi_qla_host_t *ha)
                        if (fcport->port_type != FCT_TARGET)
                                continue;
 
-                       ret = qla2x00_device_reset(ha, fcport);
+                       ret = ha->isp_ops->abort_target(fcport);
                        if (ret != QLA_SUCCESS) {
                                DEBUG2_3(printk("%s(%ld): bus_reset failed: "
                                    "target_reset=%d d_id=%x.\n", __func__,
@@ -1086,26 +1081,6 @@ qla2x00_loop_reset(scsi_qla_host_t *ha)
        return QLA_SUCCESS;
 }
 
-/*
- * qla2x00_device_reset
- *     Issue bus device reset message to the target.
- *
- * Input:
- *     ha = adapter block pointer.
- *     t = SCSI ID.
- *     TARGET_QUEUE_LOCK must be released.
- *     ADAPTER_STATE_LOCK must be released.
- *
- * Context:
- *     Kernel context.
- */
-static int
-qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
-{
-       /* Abort Target command will clear Reservation */
-       return ha->isp_ops->abort_target(reset_fcport);
-}
-
 void
 qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
 {
@@ -2378,12 +2353,6 @@ qla2x00_do_dpc(void *data)
                if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
                        qla2x00_update_fcports(ha);
 
-               if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
-                       DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
-                           ha->host_no));
-                       qla2x00_loop_reset(ha);
-               }
-
                if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
                    (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
 
@@ -2454,19 +2423,6 @@ qla2x00_do_dpc(void *data)
                            ha->host_no));
                }
 
-               if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
-                   atomic_read(&ha->loop_state) != LOOP_DOWN) {
-
-                       clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
-                       DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
-                           ha->host_no));
-
-                       set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
-
-                       DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
-                           ha->host_no));
-               }
-
                if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
 
                        DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
@@ -2484,18 +2440,6 @@ qla2x00_do_dpc(void *data)
                            ha->host_no));
                }
 
-               if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
-
-                       DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
-                           ha->host_no));
-
-                       qla2x00_rescan_fcports(ha);
-
-                       DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
-                           "end.\n",
-                           ha->host_no));
-               }
-
                if (!ha->interrupts_on)
                        ha->isp_ops->enable_intrs(ha);
 
@@ -2697,10 +2641,8 @@ qla2x00_timer(scsi_qla_host_t *ha)
        /* Schedule the DPC routine if needed */
        if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
            test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
-           test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
            test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
            start_dpc ||
-           test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
            test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
            test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
            test_bit(VP_DPC_NEEDED, &ha->dpc_flags) ||