struct kref kref;
struct tty_struct *tty;
unsigned int index;
- unsigned int opened;
struct sdio_func *func;
struct mutex func_lock;
struct task_struct *in_sdio_uart_irq;
static void sdio_uart_port_remove(struct sdio_uart_port *port)
{
struct sdio_func *func;
+ struct tty_struct *tty;
BUG_ON(sdio_uart_table[port->index] != port);
sdio_claim_host(func);
port->func = NULL;
mutex_unlock(&port->func_lock);
- if (port->opened) {
- struct tty_struct *tty = tty_port_tty_get(&port->port);
- /* tty_hangup is async so is this safe as is ?? */
- if (tty)
- tty_hangup(tty);
+ tty = tty_port_tty_get(&port->port);
+ /* tty_hangup is async so is this safe as is ?? */
+ if (tty) {
+ tty_hangup(tty);
tty_kref_put(tty);
}
mutex_unlock(&port->port.mutex);
port->in_sdio_uart_irq = NULL;
}
-static int sdio_uart_startup(struct sdio_uart_port *port)
+/**
+ * uart_dtr_rts - port helper to set uart signals
+ * @tport: tty port to be updated
+ * @onoff: set to turn on DTR/RTS
+ *
+ * Called by the tty port helpers when the modem signals need to be
+ * adjusted during an open, close and hangup.
+ */
+
+static void uart_dtr_rts(struct tty_port *tport, int onoff)
{
- unsigned long page;
- int ret = -ENOMEM;
- struct tty_struct *tty = tty_port_tty_get(&port->port);
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
+ if (onoff == 0)
+ sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+}
- /* FIXME: What if it is NULL ?? */
+/**
+ * sdio_uart_activate - start up hardware
+ * @tport: tty port to activate
+ * @tty: tty bound to this port
+ *
+ * Activate a tty port. The port locking guarantees us this will be
+ * run exactly once per set of opens, and if successful will see the
+ * shutdown method run exactly once to match. Start up and shutdown are
+ * protected from each other by the internal locking and will not run
+ * at the same time even during a hangup event.
+ *
+ * If we successfully start up the port we take an extra kref as we
+ * will keep it around until shutdown when the kref is dropped.
+ */
+
+static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
+ unsigned long page;
+ int ret;
/*
* Set the TTY IO error marker - we will only clear this
/* Initialise and allocate the transmit buffer. */
page = __get_free_page(GFP_KERNEL);
if (!page)
- goto err0;
+ return -ENOMEM;
port->xmit.buf = (unsigned char *)page;
circ_clear(&port->xmit);
sdio_uart_irq(port->func);
sdio_uart_release_func(port);
- tty_kref_put(tty);
return 0;
err3:
sdio_uart_release_func(port);
err1:
free_page((unsigned long)port->xmit.buf);
-err0:
- tty_kref_put(tty);
return ret;
}
-static void sdio_uart_shutdown(struct sdio_uart_port *port)
+
+/**
+ * sdio_uart_shutdown - stop hardware
+ * @tport: tty port to shut down
+ *
+ * Deactivate a tty port. The port locking guarantees us this will be
+ * run only if a successful matching activate already ran. The two are
+ * protected from each other by the internal locking and will not run
+ * at the same time even during a hangup event.
+ */
+
+static void sdio_uart_shutdown(struct tty_port *tport)
{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
int ret;
- struct tty_struct *tty;
ret = sdio_uart_claim_func(port);
if (ret)
sdio_uart_stop_rx(port);
- /* TODO: wait here for TX FIFO to drain */
-
- tty = tty_port_tty_get(&port->port);
- /* Turn off DTR and RTS early. */
- if (tty && (tty->termios->c_cflag & HUPCL))
- sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- tty_kref_put(tty);
-
/* Disable interrupts from this port */
sdio_release_irq(port->func);
port->ier = 0;
free_page((unsigned long)port->xmit.buf);
}
-static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
-{
- struct sdio_uart_port *port;
- int ret;
-
- port = sdio_uart_port_get(tty->index);
- if (!port)
- return -ENODEV;
-
- mutex_lock(&port->port.mutex);
+/**
+ * sdio_uart_install - install method
+ * @driver: the driver in use (sdio_uart in our case)
+ * @tty: the tty being bound
+ *
+ * Look up and bind the tty and the driver together. Initialize
+ * any needed private data (in our case the termios)
+ */
- /*
- * Make sure not to mess up with a dead port
- * which has not been closed yet.
- */
- if (tty->driver_data && tty->driver_data != port) {
- mutex_unlock(&port->port.mutex);
+static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ int idx = tty->index;
+ struct sdio_uart_port *port = sdio_uart_port_get(idx);
+ int ret = tty_init_termios(tty);
+
+ if (ret == 0) {
+ tty_driver_kref_get(driver);
+ tty->count++;
+ /* This is the ref sdio_uart_port get provided */
+ tty->driver_data = port;
+ driver->ttys[idx] = tty;
+ } else
sdio_uart_port_put(port);
- return -EBUSY;
- }
+ return ret;
- if (!port->opened) {
- tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
- ret = sdio_uart_startup(port);
- if (ret) {
- tty->driver_data = NULL;
- tty_port_tty_set(&port->port, NULL);
- mutex_unlock(&port->port.mutex);
- sdio_uart_port_put(port);
- return ret;
- }
- }
- port->opened++;
- mutex_unlock(&port->port.mutex);
- return 0;
}
-static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
+/**
+ * sdio_uart_cleanup - called on the last tty kref drop
+ * @tty: the tty being destroyed
+ *
+ * Called asynchronously when the last reference to the tty is dropped.
+ * We cannot destroy the tty->driver_data port kref until this point
+ */
+
+static void sdio_uart_cleanup(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
+ tty->driver_data = NULL; /* Bug trap */
+ sdio_uart_port_put(port);
+}
- if (!port)
- return;
+/*
+ * Open/close/hangup is now entirely boilerplate
+ */
- mutex_lock(&port->port.mutex);
- BUG_ON(!port->opened);
+static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ return tty_port_open(&port->port, tty, filp);
+}
- /*
- * This is messy. The tty layer calls us even when open()
- * returned an error. Ignore this close request if tty->count
- * is larger than port->count.
- */
- if (tty->count > port->opened) {
- mutex_unlock(&port->port.mutex);
- return;
- }
+static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ tty_port_close(&port->port, tty, filp);
+}
- if (--port->opened == 0) {
- tty->closing = 1;
- sdio_uart_shutdown(port);
- tty_ldisc_flush(tty);
- tty_port_tty_set(&port->port, NULL);
- tty->driver_data = NULL;
- tty->closing = 0;
- }
- mutex_unlock(&port->port.mutex);
- sdio_uart_port_put(port);
+static void sdio_uart_hangup(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ tty_port_hangup(&port->port);
}
static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
.release = single_release,
};
+static const struct tty_port_operations sdio_uart_port_ops = {
+ .dtr_rts = uart_dtr_rts,
+ .shutdown = sdio_uart_shutdown,
+ .activate = sdio_uart_activate,
+};
+
static const struct tty_operations sdio_uart_ops = {
.open = sdio_uart_open,
.close = sdio_uart_close,
.throttle = sdio_uart_throttle,
.unthrottle = sdio_uart_unthrottle,
.set_termios = sdio_uart_set_termios,
+ .hangup = sdio_uart_hangup,
.break_ctl = sdio_uart_break_ctl,
.tiocmget = sdio_uart_tiocmget,
.tiocmset = sdio_uart_tiocmset,
+ .install = sdio_uart_install,
+ .cleanup = sdio_uart_cleanup,
.proc_fops = &sdio_uart_proc_fops,
};
port->func = func;
sdio_set_drvdata(func, port);
tty_port_init(&port->port);
+ port->port.ops = &sdio_uart_port_ops;
ret = sdio_uart_add_port(port);
if (ret) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff