{
struct acx_smart_reflex_state *sr_state = NULL;
struct acx_smart_reflex_config_params *sr_param = NULL;
- int ret;
+ int i, ret;
wl1271_debug(DEBUG_ACX, "acx smart reflex");
goto out;
}
- /* set cryptic smart reflex parameters - source TI reference code */
- sr_param->error_table[0].len = 0x07;
- sr_param->error_table[0].upper_limit = 0x03;
- sr_param->error_table[0].values[0] = 0x18;
- sr_param->error_table[0].values[1] = 0x10;
- sr_param->error_table[0].values[2] = 0x05;
- sr_param->error_table[0].values[3] = 0xfb;
- sr_param->error_table[0].values[4] = 0xf0;
- sr_param->error_table[0].values[5] = 0xe8;
-
- sr_param->error_table[1].len = 0x07;
- sr_param->error_table[1].upper_limit = 0x03;
- sr_param->error_table[1].values[0] = 0x18;
- sr_param->error_table[1].values[1] = 0x10;
- sr_param->error_table[1].values[2] = 0x05;
- sr_param->error_table[1].values[3] = 0xf6;
- sr_param->error_table[1].values[4] = 0xf0;
- sr_param->error_table[1].values[5] = 0xe8;
-
- sr_param->error_table[2].len = 0x07;
- sr_param->error_table[2].upper_limit = 0x03;
- sr_param->error_table[2].values[0] = 0x18;
- sr_param->error_table[2].values[1] = 0x10;
- sr_param->error_table[2].values[2] = 0x05;
- sr_param->error_table[2].values[3] = 0xfb;
- sr_param->error_table[2].values[4] = 0xf0;
- sr_param->error_table[2].values[5] = 0xe8;
+ for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
+ struct conf_mart_reflex_err_table *e =
+ &(wl->conf.init.sr_err_tbl[i]);
+
+ sr_param->error_table[i].len = e->len;
+ sr_param->error_table[i].upper_limit = e->upper_limit;
+ memcpy(sr_param->error_table[i].values, e->values, e->len);
+ }
ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
sr_param, sizeof(*sr_param));
}
/* enable smart reflex */
- sr_state->enable = 1;
+ sr_state->enable = wl->conf.init.sr_enable;
ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
sr_state, sizeof(*sr_state));
struct conf_sig_weights sig_weights;
};
+#define CONF_SR_ERR_TBL_MAX_VALUES 14
+
+struct conf_mart_reflex_err_table {
+ /*
+ * Length of the error table values table.
+ *
+ * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
+ */
+ u8 len;
+
+ /*
+ * Smart Reflex error table upper limit.
+ *
+ * Range: s8
+ */
+ s8 upper_limit;
+
+ /*
+ * Smart Reflex error table values.
+ *
+ * Range: s8
+ */
+ s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
+};
+
+enum {
+ CONF_REF_CLK_19_2_E,
+ CONF_REF_CLK_26_E,
+ CONF_REF_CLK_38_4_E,
+ CONF_REF_CLK_52_E
+};
+
+struct conf_general_parms {
+ /*
+ * RF Reference Clock type / speed
+ *
+ * Range: CONF_REF_CLK_*
+ */
+ u8 ref_clk;
+
+ /*
+ * Settling time of the reference clock after boot.
+ *
+ * Range: u8
+ */
+ u8 settling_time;
+
+ /*
+ * Flag defining whether clock is valid on wakeup.
+ *
+ * Range: 0 - not valid on wakeup, 1 - valid on wakeup
+ */
+ u8 clk_valid_on_wakeup;
+
+ /*
+ * DC-to-DC mode.
+ *
+ * Range: Unknown
+ */
+ u8 dc2dcmode;
+
+ /*
+ * Flag defining whether used as single or dual-band.
+ *
+ * Range: Unknown
+ */
+ u8 single_dual_band;
+
+ /*
+ * TX bip fem autodetect flag.
+ *
+ * Range: Unknown
+ */
+ u8 tx_bip_fem_autodetect;
+
+ /*
+ * TX bip gem manufacturer.
+ *
+ * Range: Unknown
+ */
+ u8 tx_bip_fem_manufacturer;
+
+ /*
+ * Settings flags.
+ *
+ * Range: Unknown
+ */
+ u8 settings;
+};
+
+#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
+#define CONF_NUMBER_OF_SUB_BANDS_5 7
+#define CONF_NUMBER_OF_RATE_GROUPS 6
+#define CONF_NUMBER_OF_CHANNELS_2_4 14
+#define CONF_NUMBER_OF_CHANNELS_5 35
+
+struct conf_radio_parms {
+ /*
+ * Static radio parameters for 2.4GHz
+ *
+ * Range: unknown
+ */
+ u8 rx_trace_loss;
+ u8 tx_trace_loss;
+ s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /*
+ * Static radio parameters for 5GHz
+ *
+ * Range: unknown
+ */
+ u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /*
+ * Dynamic radio parameters for 2.4GHz
+ *
+ * Range: unknown
+ */
+ s16 tx_ref_pd_voltage;
+ s8 tx_ref_power;
+ s8 tx_offset_db;
+
+ s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+ u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+ u8 rx_fem_insertion_loss;
+
+ /*
+ * Dynamic radio parameters for 5GHz
+ *
+ * Range: unknown
+ */
+ s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+ s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+ s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+ /* FIXME: this is inconsistent with the types for 2.4GHz */
+ s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+};
+
+#define CONF_SR_ERR_TBL_COUNT 3
+
+struct conf_init_settings {
+ /*
+ * Configure Smart Reflex error table values.
+ */
+ struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
+
+ /*
+ * Smart Reflex enable flag.
+ *
+ * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
+ */
+ u8 sr_enable;
+
+ /*
+ * Configure general parameters.
+ */
+ struct conf_general_parms genparam;
+
+ /*
+ * Configure radio parameters.
+ */
+ struct conf_radio_parms radioparam;
+
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
+ struct conf_init_settings init;
};
#endif
static int wl1271_init_general_parms(struct wl1271 *wl)
{
struct wl1271_general_parms *gen_parms;
+ struct conf_general_parms *g = &wl->conf.init.genparam;
int ret;
gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
gen_parms->id = TEST_CMD_INI_FILE_GENERAL_PARAM;
- /*
- * FIXME: The firmware crashes on boot with REF_CLK_38_4_E as clock.
- * according to TI engineers, ref clk 5 is an unofficial
- * 38.4 XTAL clock config, which seems to boot the device.
- * Restore correct value once the real problem source is
- * identified.
- */
- gen_parms->ref_clk = 5; /* REF_CLK_38_4_E; */
- /* FIXME: magic numbers */
- gen_parms->settling_time = 5;
- gen_parms->clk_valid_on_wakeup = 0;
- gen_parms->dc2dcmode = 0;
- gen_parms->single_dual_band = 0;
- gen_parms->tx_bip_fem_autodetect = 0;
- gen_parms->tx_bip_fem_manufacturer = 1;
- gen_parms->settings = 1;
+ gen_parms->ref_clk = g->ref_clk;
+ gen_parms->settling_time = g->settling_time;
+ gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
+ gen_parms->dc2dcmode = g->dc2dcmode;
+ gen_parms->single_dual_band = g->single_dual_band;
+ gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
+ gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
+ gen_parms->settings = g->settings;
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
if (ret < 0) {
static int wl1271_init_radio_parms(struct wl1271 *wl)
{
- /*
- * FIXME: All these magic numbers should be moved to some place where
- * they can be configured (separate file?)
- */
-
struct wl1271_radio_parms *radio_parms;
- int ret;
- u8 compensation[] = { 0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8, 0xfc, 0x00,
- 0x08, 0x10, 0xf0, 0xf8, 0x00, 0x0a, 0x14 };
-
- u8 tx_rate_limits_normal[] = { 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 };
- u8 tx_rate_limits_degraded[] = { 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 };
-
- u8 tx_channel_limits_11b[] = { 0x22, 0x50, 0x50, 0x50,
- 0x50, 0x50, 0x50, 0x50,
- 0x50, 0x50, 0x22, 0x50,
- 0x22, 0x50 };
-
- u8 tx_channel_limits_ofdm[] = { 0x20, 0x50, 0x50, 0x50,
- 0x50, 0x50, 0x50, 0x50,
- 0x50, 0x50, 0x20, 0x50,
- 0x20, 0x50 };
-
- u8 tx_pdv_rate_offsets[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- u8 tx_ibias[] = { 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 };
+ struct conf_radio_parms *r = &wl->conf.init.radioparam;
+ int i, ret;
radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
if (!radio_parms)
radio_parms->id = TEST_CMD_INI_FILE_RADIO_PARAM;
/* Static radio parameters */
- radio_parms->rx_trace_loss = 10;
- radio_parms->tx_trace_loss = 10;
- memcpy(radio_parms->rx_rssi_and_proc_compens, compensation,
- sizeof(compensation));
-
- /* We don't set the 5GHz -- N/A */
+ radio_parms->rx_trace_loss = r->rx_trace_loss;
+ radio_parms->tx_trace_loss = r->tx_trace_loss;
+ memcpy(radio_parms->rx_rssi_and_proc_compens,
+ r->rx_rssi_and_proc_compens,
+ CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
+
+ memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
+ CONF_NUMBER_OF_SUB_BANDS_5);
+ memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
+ CONF_NUMBER_OF_SUB_BANDS_5);
+ memcpy(radio_parms->rx_rssi_and_proc_compens_5,
+ r->rx_rssi_and_proc_compens_5,
+ CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
/* Dynamic radio parameters */
- radio_parms->tx_ref_pd_voltage = cpu_to_le16(0x24e);
- radio_parms->tx_ref_power = 0x78;
- radio_parms->tx_offset_db = 0x0;
-
- memcpy(radio_parms->tx_rate_limits_normal, tx_rate_limits_normal,
- sizeof(tx_rate_limits_normal));
- memcpy(radio_parms->tx_rate_limits_degraded, tx_rate_limits_degraded,
- sizeof(tx_rate_limits_degraded));
-
- memcpy(radio_parms->tx_channel_limits_11b, tx_channel_limits_11b,
- sizeof(tx_channel_limits_11b));
- memcpy(radio_parms->tx_channel_limits_ofdm, tx_channel_limits_ofdm,
- sizeof(tx_channel_limits_ofdm));
- memcpy(radio_parms->tx_pdv_rate_offsets, tx_pdv_rate_offsets,
- sizeof(tx_pdv_rate_offsets));
- memcpy(radio_parms->tx_ibias, tx_ibias,
- sizeof(tx_ibias));
-
- radio_parms->rx_fem_insertion_loss = 0x14;
+ radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
+ radio_parms->tx_ref_power = r->tx_ref_power;
+ radio_parms->tx_offset_db = r->tx_offset_db;
+
+ memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
+ CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
+ CONF_NUMBER_OF_RATE_GROUPS);
+
+ memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
+ CONF_NUMBER_OF_CHANNELS_2_4);
+ memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
+ CONF_NUMBER_OF_CHANNELS_2_4);
+ memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
+ CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
+
+ radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+
+ for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
+ radio_parms->tx_ref_pd_voltage_5[i] =
+ cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
+ memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
+ CONF_NUMBER_OF_SUB_BANDS_5);
+ memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
+ CONF_NUMBER_OF_SUB_BANDS_5);
+ memcpy(radio_parms->tx_rate_limits_normal_5,
+ r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_rate_limits_degraded_5,
+ r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_channel_limits_ofdm_5,
+ r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
+ memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
+ CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
+ CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->rx_fem_insertion_loss_5,
+ r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
if (ret < 0)
u8 settings;
} __attribute__ ((packed));
-enum ref_clk_enum {
- REF_CLK_19_2_E,
- REF_CLK_26_E,
- REF_CLK_38_4_E,
- REF_CLK_52_E
-};
-
-#define RSSI_AND_PROCESS_COMPENSATION_SIZE 15
-#define NUMBER_OF_SUB_BANDS_5 7
-#define NUMBER_OF_RATE_GROUPS 6
-#define NUMBER_OF_CHANNELS_2_4 14
-#define NUMBER_OF_CHANNELS_5 35
-
struct wl1271_radio_parms {
u8 id;
u8 padding[3];
/* 2.4GHz */
u8 rx_trace_loss;
u8 tx_trace_loss;
- s8 rx_rssi_and_proc_compens[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+ s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
/* 5GHz */
- u8 rx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
- u8 tx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
- s8 rx_rssi_and_proc_compens_5[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+ u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
/* Dynamic radio parameters */
/* 2.4GHz */
s8 tx_ref_power;
s8 tx_offset_db;
- s8 tx_rate_limits_normal[NUMBER_OF_RATE_GROUPS];
- s8 tx_rate_limits_degraded[NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
- s8 tx_channel_limits_11b[NUMBER_OF_CHANNELS_2_4];
- s8 tx_channel_limits_ofdm[NUMBER_OF_CHANNELS_2_4];
- s8 tx_pdv_rate_offsets[NUMBER_OF_RATE_GROUPS];
+ s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+ s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
- u8 tx_ibias[NUMBER_OF_RATE_GROUPS];
+ u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
u8 rx_fem_insertion_loss;
u8 padding2;
/* 5GHz */
- s16 tx_ref_pd_voltage_5[NUMBER_OF_SUB_BANDS_5];
- s8 tx_ref_power_5[NUMBER_OF_SUB_BANDS_5];
- s8 tx_offset_db_5[NUMBER_OF_SUB_BANDS_5];
+ s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 tx_rate_limits_normal_5[NUMBER_OF_RATE_GROUPS];
- s8 tx_rate_limits_degraded_5[NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
- s8 tx_channel_limits_ofdm_5[NUMBER_OF_CHANNELS_5];
- s8 tx_pdv_rate_offsets_5[NUMBER_OF_RATE_GROUPS];
+ s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+ s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
/* FIXME: this is inconsistent with the types for 2.4GHz */
- s8 tx_ibias_5[NUMBER_OF_RATE_GROUPS];
- s8 rx_fem_insertion_loss_5[NUMBER_OF_SUB_BANDS_5];
+ s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
u8 padding3[2];
} __attribute__ ((packed));
.snr_bcn_avg_weight = 10,
.snr_pkt_avg_weight = 10
}
+ },
+ .init = {
+ .sr_err_tbl = {
+ [0] = {
+ .len = 7,
+ .upper_limit = 0x03,
+ .values = {
+ 0x18, 0x10, 0x05, 0xfb,
+ 0xf0, 0xe8, 0x00 }
+ },
+ [1] = {
+ .len = 7,
+ .upper_limit = 0x03,
+ .values = {
+ 0x18, 0x10, 0x05, 0xf6,
+ 0xf0, 0xe8, 0x00 }
+ },
+ [2] = {
+ .len = 7,
+ .upper_limit = 0x03,
+ .values = {
+ 0x18, 0x10, 0x05, 0xfb,
+ 0xf0, 0xe8, 0x00 }
+ }
+ },
+ .sr_enable = 1,
+ .genparam = {
+ /*
+ * FIXME: The correct value CONF_REF_CLK_38_4_E
+ * causes the firmware to crash on boot.
+ * The value 5 apparently is an
+ * unnoficial XTAL configuration of the
+ * same frequency, which appears to work.
+ */
+ .ref_clk = 5,
+ .settling_time = 5,
+ .clk_valid_on_wakeup = 0,
+ .dc2dcmode = 0,
+ .single_dual_band = 0,
+ .tx_bip_fem_autodetect = 0,
+ .tx_bip_fem_manufacturer = 1,
+ .settings = 1,
+ },
+ .radioparam = {
+ /* FIXME: 5GHz values unset! */
+ .rx_trace_loss = 10,
+ .tx_trace_loss = 10,
+ .rx_rssi_and_proc_compens = {
+ 0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
+ 0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+ 0x00, 0x0a, 0x14 },
+ .rx_trace_loss_5 = {
+ 0, 0, 0, 0, 0, 0, 0 },
+ .tx_trace_loss_5 = {
+ 0, 0, 0, 0, 0, 0, 0 },
+ .rx_rssi_and_proc_compens_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00 },
+ .tx_ref_pd_voltage = 0x24e,
+ .tx_ref_power = 0x78,
+ .tx_offset_db = 0x0,
+ .tx_rate_limits_normal = {
+ 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+ .tx_rate_limits_degraded = {
+ 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+ .tx_channel_limits_11b = {
+ 0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
+ 0x22, 0x50 },
+ .tx_channel_limits_ofdm = {
+ 0x20, 0x50, 0x50, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
+ 0x20, 0x50 },
+ .tx_pdv_rate_offsets = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ .tx_ibias = {
+ 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
+ .rx_fem_insertion_loss = 0x14,
+ .tx_ref_pd_voltage_5 = {
+ 0, 0, 0, 0, 0, 0, 0 },
+ .tx_ref_power_5 = {
+ 0, 0, 0, 0, 0, 0, 0 },
+ .tx_offset_db_5 = {
+ 0, 0, 0, 0, 0, 0, 0 },
+ .tx_rate_limits_normal_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ .tx_rate_limits_degraded_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ .tx_channel_limits_ofdm_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00},
+ .tx_pdv_rate_offsets_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ .tx_ibias_5 = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ .rx_fem_insertion_loss_5 = {
+ 0, 0, 0, 0, 0, 0, 0 }
+ }
}
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff