return sprintf(buf, "%s\n", client->name);
}
-/*
+/*
* We can't use the DEVICE_ATTR() macro here as we want the same filename for a
* different type of a device. So beware if the DEVICE_ATTR() macro ever
* changes, this definition will also have to change.
/* ---------------------------------------------------
- * registering functions
- * ---------------------------------------------------
+ * registering functions
+ * ---------------------------------------------------
*/
/* -----
res = driver_register(&driver->driver);
if (res)
return res;
-
+
mutex_lock(&core_lists);
list_add_tail(&driver->list,&drivers);
struct list_head *item1, *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
-
+
int res = 0;
mutex_lock(&core_lists);
/* Have a look at each adapter, if clients of this driver are still
- * attached. If so, detach them to be able to kill the driver
+ * attached. If so, detach them to be able to kill the driver
* afterwards.
*/
list_for_each(item1,&adapters) {
goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
-
+
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.driver = &client->driver->driver;
client->dev.bus = &i2c_bus_type;
client->dev.release = &i2c_client_release;
-
+
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
{
struct i2c_adapter *adapter = client->adapter;
int res = 0;
-
+
if (client->usage_count > 0) {
dev_warn(&client->dev, "Client [%s] still busy, "
"can't detach\n", client->name);
__FUNCTION__);
return -EPERM;
}
-
+
client->usage_count--;
i2c_dec_use_client(client);
-
+
return 0;
}
msg.flags = client->flags & I2C_M_TEN;
msg.len = count;
msg.buf = (char *)buf;
-
+
ret = i2c_transfer(adap, &msg, 1);
/* If everything went ok (i.e. 1 msg transmitted), return #bytes
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
- return 0;
+ return 0;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
"can't probe for chips\n");
struct i2c_adapter* i2c_get_adapter(int id)
{
struct i2c_adapter *adapter;
-
+
mutex_lock(&core_lists);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
/* The SMBus parts */
-#define POLY (0x1070U << 3)
+#define POLY (0x1070U << 3)
static u8
crc8(u16 data)
{
int i;
-
+
for(i = 0; i < 8; i++) {
- if (data & 0x8000)
+ if (data & 0x8000)
data = data ^ POLY;
data = data << 1;
}
rpec, cpec);
return -1;
}
- return 0;
+ return 0;
}
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- value,0,I2C_SMBUS_QUICK,NULL);
+ value,0,I2C_SMBUS_QUICK,NULL);
}
s32 i2c_smbus_read_byte(struct i2c_client *client)
I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
-/* Simulate a SMBus command using the i2c protocol
+/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
/* So we need to generate a series of msgs. In the case of writing, we
unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
- struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
+ struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
if (i) {
/* Compute PEC if first message is a write */
if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
+ if (num == 1) /* Write only */
i2c_smbus_add_pec(&msg[0]);
else /* Write followed by read */
partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
}
/* Ask for PEC if last message is a read */
if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
+ msg[num-1].len++;
}
if (i2c_transfer(adapter, msg, num) < 0)
case I2C_SMBUS_BYTE_DATA:
data->byte = msgbuf1[0];
break;
- case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
s32 res;
/*
- i2c-dev.c - i2c-bus driver, char device interface
+ i2c-dev.c - i2c-bus driver, char device interface
Copyright (C) 1995-97 Simon G. Vogl
Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
switch ( cmd ) {
case I2C_SLAVE:
case I2C_SLAVE_FORCE:
- if ((arg > 0x3ff) ||
+ if ((arg > 0x3ff) ||
(((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
return -EINVAL;
if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
return put_user(funcs, (unsigned long __user *)arg);
case I2C_RDWR:
- if (copy_from_user(&rdwr_arg,
- (struct i2c_rdwr_ioctl_data __user *)arg,
+ if (copy_from_user(&rdwr_arg,
+ (struct i2c_rdwr_ioctl_data __user *)arg,
sizeof(rdwr_arg)))
return -EFAULT;
* be sent at once */
if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
return -EINVAL;
-
+
rdwr_pa = (struct i2c_msg *)
- kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
+ kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
GFP_KERNEL);
if (rdwr_pa == NULL) return -ENOMEM;
(struct i2c_smbus_ioctl_data __user *) arg,
sizeof(struct i2c_smbus_ioctl_data)))
return -EFAULT;
- if ((data_arg.size != I2C_SMBUS_BYTE) &&
+ if ((data_arg.size != I2C_SMBUS_BYTE) &&
(data_arg.size != I2C_SMBUS_QUICK) &&
- (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
+ (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
(data_arg.size != I2C_SMBUS_WORD_DATA) &&
(data_arg.size != I2C_SMBUS_PROC_CALL) &&
(data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
data_arg.size);
return -EINVAL;
}
- /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
+ /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
so the check is valid if size==I2C_SMBUS_QUICK too. */
- if ((data_arg.read_write != I2C_SMBUS_READ) &&
+ if ((data_arg.read_write != I2C_SMBUS_READ) &&
(data_arg.read_write != I2C_SMBUS_WRITE)) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->adapter->dev,
"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
data_arg.read_write);
return -EINVAL;
/* Note that command values are always valid! */
if ((data_arg.size == I2C_SMBUS_QUICK) ||
- ((data_arg.size == I2C_SMBUS_BYTE) &&
+ ((data_arg.size == I2C_SMBUS_BYTE) &&
(data_arg.read_write == I2C_SMBUS_WRITE)))
/* These are special: we do not use data */
return i2c_smbus_xfer(client->adapter, client->addr,
if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
(data_arg.size == I2C_SMBUS_BYTE))
datasize = sizeof(data_arg.data->byte);
- else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
+ else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
(data_arg.size == I2C_SMBUS_PROC_CALL))
datasize = sizeof(data_arg.data->word);
else /* size == smbus block, i2c block, or block proc. call */
datasize = sizeof(data_arg.data->block);
- if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_WRITE)) {
if (copy_from_user(&temp, data_arg.data, datasize))
return -EFAULT;
res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
data_arg.read_write,
data_arg.command,data_arg.size,&temp);
- if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_READ))) {
if (copy_to_user(data_arg.data, &temp, datasize))
return -EFAULT;
/* --- Defines for bit-adapters --------------------------------------- */
/*
- * This struct contains the hw-dependent functions of bit-style adapters to
+ * This struct contains the hw-dependent functions of bit-style adapters to
* manipulate the line states, and to init any hw-specific features. This is
- * only used if you have more than one hw-type of adapter running.
+ * only used if you have more than one hw-type of adapter running.
*/
struct i2c_algo_bit_data {
void *data; /* private data for lowlevel routines */
int (*getpcf) (void *data, int ctl);
int (*getown) (void *data);
int (*getclock) (void *data);
- void (*waitforpin) (void);
+ void (*waitforpin) (void);
/* local settings */
int udelay;
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c-id.h - identifier values for i2c drivers and adapters */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-1999 Simon G. Vogl
#define I2C_DRIVERID_SAA7120 11 /* video encoder */
#define I2C_DRIVERID_SAA7121 12 /* video encoder */
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
-#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
+#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */
#define I2C_DRIVERID_PCF8582C 16 /* eeprom */
-#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
+#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
#define I2C_DRIVERID_TEA6300 18 /* audio mixer */
#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */
#define I2C_DRIVERID_TDA9850 20 /* audio mixer */
* ---- Adapter types ----------------------------------------------------
*/
-/* --- Bit algorithm adapters */
+/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c.h - definitions for the i2c-bus interface */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-2000 Simon G. Vogl
#define _LINUX_I2C_H
#include <linux/types.h>
-#ifdef __KERNEL__
+#ifdef __KERNEL__
#include <linux/module.h>
#include <linux/i2c-id.h>
#include <linux/mod_devicetable.h>
/*
* The master routines are the ones normally used to transmit data to devices
- * on a bus (or read from them). Apart from two basic transfer functions to
- * transmit one message at a time, a more complex version can be used to
+ * on a bus (or read from them). Apart from two basic transfer functions to
+ * transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
extern int i2c_master_send(struct i2c_client *,const char* ,int);
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
- and probably just as fast.
+ and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
+extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
/* Notifies the driver that a new bus has appeared. This routine
* can be used by the driver to test if the bus meets its conditions
- * & seek for the presence of the chip(s) it supports. If found, it
+ * & seek for the presence of the chip(s) it supports. If found, it
* registers the client(s) that are on the bus to the i2c admin. via
* i2c_attach_client.
*/
int (*attach_adapter)(struct i2c_adapter *);
int (*detach_adapter)(struct i2c_adapter *);
- /* tells the driver that a client is about to be deleted & gives it
+ /* tells the driver that a client is about to be deleted & gives it
* the chance to remove its private data. Also, if the client struct
* has been dynamically allocated by the driver in the function above,
* it must be freed here.
#define I2C_NAME_SIZE 50
/*
- * i2c_client identifies a single device (i.e. chip) that is connected to an
+ * i2c_client identifies a single device (i.e. chip) that is connected to an
* i2c bus. The behaviour is defined by the routines of the driver. This
* function is mainly used for lookup & other admin. functions.
*/
struct i2c_client {
unsigned int flags; /* div., see below */
- unsigned short addr; /* chip address - NOTE: 7bit */
+ unsigned short addr; /* chip address - NOTE: 7bit */
/* addresses are stored in the */
/* _LOWER_ 7 bits */
struct i2c_adapter *adapter; /* the adapter we sit on */
*/
struct i2c_algorithm {
/* If an adapter algorithm can't do I2C-level access, set master_xfer
- to NULL. If an adapter algorithm can do SMBus access, set
+ to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
- int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
+ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
- int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
+ int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
* It will only call found_proc if some client is connected at the
* specific address (unless a 'force' matched);
*/
-extern int i2c_probe(struct i2c_adapter *adapter,
+extern int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
*/
struct i2c_msg {
__u16 addr; /* slave address */
- __u16 flags;
+ __u16 flags;
#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
#define I2C_M_RD 0x01
#define I2C_M_NOSTART 0x4000
#define I2C_M_REV_DIR_ADDR 0x2000
#define I2C_M_IGNORE_NAK 0x1000
#define I2C_M_NO_RD_ACK 0x0800
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
+ __u16 len; /* msg length */
+ __u8 *buf; /* pointer to msg data */
};
/* To determine what functionality is present */
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
-/*
- * Data for SMBus Messages
+/*
+ * Data for SMBus Messages
*/
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
union i2c_smbus_data {
__u8 byte;
__u16 word;
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
-/* SMBus transaction types (size parameter in the above functions)
+/* SMBus transaction types (size parameter in the above functions)
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK 0
#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_BYTE_DATA 2
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
/* ----- commands for the ioctl like i2c_command call:
- * note that additional calls are defined in the algorithm and hw
- * dependent layers - these can be listed here, or see the
+ * note that additional calls are defined in the algorithm and hw
+ * dependent layers - these can be listed here, or see the
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
#define I2C_RETRIES 0x0701 /* number of times a device address */
/* should be polled when not */
- /* acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
+ /* acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
/* this is for i2c-dev.c */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff