ide-tape: remove unreachable code chunk
authorBorislav Petkov <petkovbb@googlemail.com>
Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)
tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function
names.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-tape.c

index 3c516ff..1dc4a9e 100644 (file)
@@ -87,7 +87,8 @@ enum {
  *     the optimum value or until we reach MAX.
  *
  *     Setting the following parameter to 0 is illegal: the pipelined mode
- *     cannot be disabled (calculate_speeds() divides by tape->max_stages.)
+ *     cannot be disabled (idetape_calculate_speeds() divides by
+ *     tape->max_stages.)
  */
 #define IDETAPE_MIN_PIPELINE_STAGES      1
 #define IDETAPE_MAX_PIPELINE_STAGES    400
@@ -1475,10 +1476,9 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
        pc->callback = &idetape_pc_callback;
 }
 
-static void calculate_speeds(ide_drive_t *drive)
+static void idetape_calculate_speeds(ide_drive_t *drive)
 {
        idetape_tape_t *tape = drive->driver_data;
-       int full = 125, empty = 75;
 
        if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) {
                tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head;
@@ -1505,22 +1505,20 @@ static void calculate_speeds(ide_drive_t *drive)
                }
        }
        tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed);
-       if (tape->speed_control == 0) {
-               tape->max_insert_speed = 5000;
-       } else if (tape->speed_control == 1) {
+
+       if (tape->speed_control == 1) {
                if (tape->nr_pending_stages >= tape->max_stages / 2)
                        tape->max_insert_speed = tape->pipeline_head_speed +
                                (1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages;
                else
                        tape->max_insert_speed = 500 +
                                (tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages;
+
                if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
                        tape->max_insert_speed = 5000;
-       } else if (tape->speed_control == 2) {
-               tape->max_insert_speed = tape->pipeline_head_speed * empty / 100 +
-                       (tape->pipeline_head_speed * full / 100 - tape->pipeline_head_speed * empty / 100) * tape->nr_pending_stages / tape->max_stages;
        } else
                tape->max_insert_speed = tape->speed_control;
+
        tape->max_insert_speed = max(tape->max_insert_speed, 500);
 }
 
@@ -1698,7 +1696,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
                tape->measure_insert_time = 1;
        if (time_after(jiffies, tape->insert_time))
                tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
-       calculate_speeds(drive);
+       idetape_calculate_speeds(drive);
        if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
            (stat & SEEK_STAT) == 0) {
                if (postponed_rq == NULL) {
@@ -2419,7 +2417,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
        idetape_switch_buffers(tape, new_stage);
        idetape_add_stage_tail(drive, new_stage);
        tape->pipeline_head++;
-       calculate_speeds(drive);
+       idetape_calculate_speeds(drive);
 
        /*
         *      Estimate whether the tape has stopped writing by checking
@@ -2659,7 +2657,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
                idetape_remove_stage_head(drive);
                spin_unlock_irqrestore(&tape->spinlock, flags);
                tape->pipeline_head++;
-               calculate_speeds(drive);
+               idetape_calculate_speeds(drive);
        }
        if (bytes_read > blocks * tape->tape_block_size) {
                printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");