Staging: w35und: use msleep() and udelay()
authorPekka Enberg <penberg@cs.helsinki.fi>
Wed, 22 Oct 2008 16:07:03 +0000 (19:07 +0300)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 6 Jan 2009 21:51:39 +0000 (13:51 -0800)
This patch removes the OS_SLEEP() wrapper and changes the call-sites to use
msleep() and udelay() where appropriate.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/winbond/linux/wb35reg.c
drivers/staging/winbond/linux/wb35rx.c
drivers/staging/winbond/linux/wb35tx.c
drivers/staging/winbond/linux/wbusb_s.h
drivers/staging/winbond/phy_calibration.c
drivers/staging/winbond/reg.c
drivers/staging/winbond/wbhal.c
drivers/staging/winbond/wblinux.c

index ebb6db5..de4040b 100644 (file)
@@ -131,7 +131,7 @@ Wb35Reg_WriteSync(  phw_data_t pHwData,  u16 RegisterNo,  u32 RegisterValue )
 
        // 20060717.5 Wait until EP0VM stop
        while (pWb35Reg->EP0vm_state != VM_STOP)
-               OS_SLEEP(10000);
+               msleep(10);
 
        // Sync IoCallDriver
        pWb35Reg->EP0vm_state = VM_RUNNING;
@@ -294,7 +294,7 @@ Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   u32 * pRegisterValue )
 
        // 20060717.5 Wait until EP0VM stop
        while (pWb35Reg->EP0vm_state != VM_STOP)
-               OS_SLEEP(10000);
+               msleep(10);
 
        pWb35Reg->EP0vm_state = VM_RUNNING;
        ret = usb_control_msg( pHwData->WbUsb.udev,
@@ -508,9 +508,9 @@ Wb35Reg_destroy(phw_data_t pHwData)
 
        // Wait for Reg operation completed
        do {
-               OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a
+               msleep(10);     // Delay for waiting function enter 940623.1.a
        } while (pWb35Reg->EP0vm_state != VM_STOP);
-       OS_SLEEP(10000);  // Delay for waiting function enter 940623.1.b
+       msleep(10);     // Delay for waiting function enter 940623.1.b
 
        // Release all the data in RegQueue
        spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
index b4b9f5f..545c610 100644 (file)
@@ -191,9 +191,9 @@ void Wb35Rx_destroy(phw_data_t pHwData)
        PWB35RX pWb35Rx = &pHwData->Wb35Rx;
 
        do {
-               OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a
+               msleep(10); // Delay for waiting function enter 940623.1.a
        } while (pWb35Rx->EP3vm_state != VM_STOP);
-       OS_SLEEP(10000); // Delay for waiting function exit 940623.1.b
+       msleep(10); // Delay for waiting function exit 940623.1.b
 
        if (pWb35Rx->RxUrb)
                usb_free_urb( pWb35Rx->RxUrb );
index ba9d512..6687051 100644 (file)
@@ -175,9 +175,9 @@ void Wb35Tx_destroy(phw_data_t pHwData)
 
        // Wait for VM stop
        do {
-               OS_SLEEP(10000);  // Delay for waiting function enter 940623.1.a
+               msleep(10);  // Delay for waiting function enter 940623.1.a
        } while( (pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP) );
-       OS_SLEEP(10000);  // Delay for waiting function enter 940623.1.b
+       msleep(10);  // Delay for waiting function enter 940623.1.b
 
        if (pWb35Tx->Tx4Urb)
                usb_free_urb( pWb35Tx->Tx4Urb );
index d5c1d53..b7fc722 100644 (file)
 //
 //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
-#define OS_SLEEP( _MT )        { set_current_state(TASK_INTERRUPTIBLE); \
-                         schedule_timeout( _MT*HZ/1000000 ); }
-
-
 //---------------------------------------------------------------------------
 //  RW_CONTEXT --
 //
index 272a650..76183b2 100644 (file)
@@ -1075,7 +1075,7 @@ void _tx_iq_calibration_winbond(hw_data_t *phw_data)
        //; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table
        //phy_set_rf_data(phw_data, 3, (3<<24)|0x025586);
 
-       OS_SLEEP(30000); // 20060612.1.a 30ms delay. Add the follow 2 lines
+       msleep(30); // 20060612.1.a 30ms delay. Add the follow 2 lines
        //To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750
        adjust_TXVGA_for_iq_mag( phw_data );
 
@@ -1698,7 +1698,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
                phw_data->txvga_setting_for_cal = current_txvga;
 
                //pa_stall_execution(30000);//Sleep(30);
-               OS_SLEEP(30000); // 20060612.1.a
+               msleep(30); // 20060612.1.a
 
                if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl) ) // 20060718.1 modify
                        return FALSE;
@@ -1715,10 +1715,10 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
                PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
                //pa_stall_execution(US);
-               OS_SLEEP(1); // 20060612.1.a
+               udelay(1); // 20060612.1.a
 
                //pa_stall_execution(300);//Sleep(30);
-               OS_SLEEP(300); // 20060612.1.a
+               udelay(300); // 20060612.1.a
 
                // b.
                hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
@@ -1726,7 +1726,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
                PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
                //pa_stall_execution(US);
                //pa_stall_execution(300);//Sleep(30);
-               OS_SLEEP(300); // 20060612.1.a
+               udelay(300); // 20060612.1.a
 
                iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
                iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
index 57af5b8..0d505ac 100644 (file)
@@ -976,9 +976,9 @@ void Uxx_power_on_procedure(  phw_data_t pHwData )
 
                // 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail
                Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
-               OS_SLEEP(10000); // Modify 20051221.1.b
+               msleep(10); // Modify 20051221.1.b
                Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
-               OS_SLEEP(10000); // Modify 20051221.1.b
+               msleep(10); // Modify 20051221.1.b
 
                ltmp = 0x4968;
                if( (pHwData->phy_type == RF_WB_242) ||
@@ -988,12 +988,12 @@ void Uxx_power_on_procedure(  phw_data_t pHwData )
 
                Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
 
-               OS_SLEEP(20000); // Modify 20051221.1.b
+               msleep(20); // Modify 20051221.1.b
                Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp );
                loop = 500; // Wait for 5 second 20061101
                while( !(ltmp & 0x20) && loop-- )
                {
-                       OS_SLEEP(10000); // Modify 20051221.1.b
+                       msleep(10); // Modify 20051221.1.b
                        if( !Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp ) )
                                break;
                }
@@ -1002,7 +1002,7 @@ void Uxx_power_on_procedure(  phw_data_t pHwData )
        }
 
        Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
-       OS_SLEEP(10000); // Add this 20051221.1.b
+       msleep(10); // Add this 20051221.1.b
 
        // Set burst write delay
        Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff );
@@ -1167,23 +1167,23 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        // 20060511.1 --- Modifying the follow step for Rx issue-----------------
                        ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(10000);
+                       msleep(10);
                        ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(10000);
+                       msleep(10);
 
                case RF_AIROHA_2230S: // 20060420 Add this
 
                        // 20060511.1 --- Modifying the follow step for Rx issue-----------------
                        Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
-                       OS_SLEEP(10000); // Modify 20051221.1.b
+                       msleep(10); // Modify 20051221.1.b
 
                        Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
-                       OS_SLEEP(10000); // Modify 20051221.1.b
+                       msleep(10); // Modify 20051221.1.b
 
                        Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
                        Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
-                       OS_SLEEP(10000); // Add this 20051221.1.b
+                       msleep(10); // Add this 20051221.1.b
                        //------------------------------------------------------------------------
 
                        // The follow code doesn't use the burst-write mode
@@ -1195,17 +1195,17 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
                        pHwData->Wb35Reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify
                Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal.
                        ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC
                        ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting
                        ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
@@ -1229,16 +1229,16 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //2.4GHz
                        //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
                        //Wb35Reg_WriteSync pHwData, 0x0864, ltmp );
-                       //OS_SLEEP(1000); // Sleep 1 ms
+                       //msleep(1); // Sleep 1 ms
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        //5GHz
                        Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
@@ -1251,7 +1251,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        // Write to register. number must less and equal than 16
                        for( i=0; i<number; i++ )
                                Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
                        #ifdef _PE_STATE_DUMP_
@@ -1262,13 +1262,13 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000);
+                       msleep(5);
 
                        //Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
                        //WBDEBUG(("* PLL_ON    high\n"));
@@ -1290,11 +1290,11 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (1a.0). Synthesizer reset (HTHo corrected 2005/05/10)
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00101E, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP( 5000 ); // Sleep 5ms
+                       msleep(5); // Sleep 5ms
                        //Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFE69c0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP( 2000 ); // Sleep 2ms
+                       msleep(2); // Sleep 2ms
 
                        //----- Calibration (2). TX baseband Gm-C filter auto-tuning
                        //Calibration (2a). turn off ENCAL signal
@@ -1309,7 +1309,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (2c). turn-on TX Gm-C filter auto-tuning
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFCEBC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP( 150 ); // Sleep 150 us
+                       udelay(150); // Sleep 150 us
                        //turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1327,7 +1327,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (3c). turn-on RX Gm-C filter auto-tuning
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFEEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP( 150 ); // Sleep 150 us
+                       udelay(150); // Sleep 150 us
                        //Calibration (3e). turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1336,7 +1336,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (4a). TX LO leakage calibration
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFD6BC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP( 150 ); // Sleep 150 us
+                       udelay(150); // Sleep 150 us
 
                        //----- Calibration (5). RX DC offset calibration
                        //Calibration (5a). turn off ENCAL signal and set to RX SW DC caliration mode
@@ -1353,7 +1353,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(2000); // Sleep 2ms
+                       msleep(2); // Sleep 2ms
                        //Calibration (5f). turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1365,7 +1365,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(2000); // Sleep 2ms
+                       msleep(2); // Sleep 2ms
                        //Calibration (5f). turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1377,7 +1377,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(2000); // Sleep 2ms
+                       msleep(2); // Sleep 2ms
                        //Calibration (5f). turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1389,7 +1389,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
                        //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(2000); // Sleep 2ms
+                       msleep(2); // Sleep 2ms
                        //Calibration (5f). turn off ENCAL signal
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1399,16 +1399,16 @@ RFSynthesizer_initial(phw_data_t pHwData)
 
                        //; ----- Calibration (7). Switch RF chip to normal mode
                        //0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode
-//                     OS_SLEEP(10000); // @@ 20060721
+//                     msleep(10); // @@ 20060721
                        ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF86100, 24);
                        Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-                       OS_SLEEP(5000); // Sleep 5 ms
+                       msleep(5); // Sleep 5 ms
 
 //                     //write back
 //                     Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->Wb35Reg.BB5C );
 //                     pHwData->Wb35Reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix
 //             Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
-//                     OS_SLEEP(1000); // Sleep 1 ms
+//                     msleep(1); // Sleep 1 ms
                        break;
        }
 }
index 5d68ece..1a2533b 100644 (file)
@@ -80,7 +80,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data)
        {
                case 4:
                case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel );
-                       OS_SLEEP(100000); // Wait for Timer DPC exit 940623.2
+                       msleep(100); // Wait for Timer DPC exit 940623.2
                        Wb35Rx_destroy( pHwData ); // Release the Rx
                case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
                case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources
index 4ed45e4..acf5640 100644 (file)
@@ -128,7 +128,7 @@ WbWlanHalt(  PADAPTER Adapter )
 #ifdef _PE_USB_INI_DUMP_
        WBDEBUG(("[w35und] Hal_stop O.K.\n"));
 #endif
-       OS_SLEEP(100000);// Waiting Irp completed
+       msleep(100);// Waiting Irp completed
 
        // Destroy the NDIS module
        WBLINUX_Destroy( Adapter );
@@ -238,7 +238,7 @@ WbWLanInitialize(PADAPTER Adapter)
 
        // Waiting for HAL setting OK
        while (!hal_idle(pHwData))
-               OS_SLEEP(10000);
+               msleep(10);
 
        MTO_Init(Adapter);