x86: unify irqinit_{32,64}.c into irqinit.c

Impact: cleanup

Reviewed-by Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 145cce7..16e3acf 100644 (file)
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -28,7 +28,7 @@ CFLAGS_paravirt.o     := $(nostackp)
 obj-y                  := process_$(BITS).o signal.o entry_$(BITS).o
 obj-y                  += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y                  += time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y                  += setup.o i8259.o irqinit_$(BITS).o
+obj-y                  += setup.o i8259.o irqinit.o
 obj-$(CONFIG_X86_VISWS)        += visws_quirks.o
 obj-$(CONFIG_X86_32)   += probe_roms_32.o
 obj-$(CONFIG_X86_32)   += sys_i386_32.o i386_ksyms_32.o

diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit.c
similarity index 100%
rename from arch/x86/kernel/irqinit_32.c
rename to arch/x86/kernel/irqinit.c

diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
deleted file mode 100644 (file)
index f3be5e9..0000000
--- a/arch/x86/kernel/irqinit_64.c
+++ /dev/null
@@ -1,277 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/timer.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/setup.h>
-#include <asm/i8259.h>
-#include <asm/traps.h>
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-
-#ifdef CONFIG_X86_32
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
-       outb(0, 0xF0);
-       if (ignore_fpu_irq || !boot_cpu_data.hard_math)
-               return IRQ_NONE;
-       math_error((void __user *)get_irq_regs()->ip);
-       return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
-       .handler = math_error_irq,
-       .name = "fpu",
-};
-#endif
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-       .handler = no_action,
-       .name = "cascade",
-};
-
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-       [0 ... IRQ0_VECTOR - 1] = -1,
-       [IRQ0_VECTOR] = 0,
-       [IRQ1_VECTOR] = 1,
-       [IRQ2_VECTOR] = 2,
-       [IRQ3_VECTOR] = 3,
-       [IRQ4_VECTOR] = 4,
-       [IRQ5_VECTOR] = 5,
-       [IRQ6_VECTOR] = 6,
-       [IRQ7_VECTOR] = 7,
-       [IRQ8_VECTOR] = 8,
-       [IRQ9_VECTOR] = 9,
-       [IRQ10_VECTOR] = 10,
-       [IRQ11_VECTOR] = 11,
-       [IRQ12_VECTOR] = 12,
-       [IRQ13_VECTOR] = 13,
-       [IRQ14_VECTOR] = 14,
-       [IRQ15_VECTOR] = 15,
-       [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
-       int cpu;
-
-       for_each_online_cpu(cpu) {
-               if (per_cpu(vector_irq, cpu)[vector] != -1)
-                       return 1;
-       }
-
-       return 0;
-}
-
-static void __init init_ISA_irqs(void)
-{
-       int i;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
-       init_bsp_APIC();
-#endif
-       init_8259A(0);
-
-       /*
-        * 16 old-style INTA-cycle interrupts:
-        */
-       for (i = 0; i < NR_IRQS_LEGACY; i++) {
-               struct irq_desc *desc = irq_to_desc(i);
-
-               desc->status = IRQ_DISABLED;
-               desc->action = NULL;
-               desc->depth = 1;
-
-               set_irq_chip_and_handler_name(i, &i8259A_chip,
-                                             handle_level_irq, "XT");
-       }
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-static void __init smp_intr_init(void)
-{
-#ifdef CONFIG_SMP
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
-       /*
-        * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-        * IPI, driven by wakeup.
-        */
-       alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-       /* IPIs for invalidation */
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
-       alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
-       /* IPI for generic function call */
-       alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-       /* IPI for generic single function call */
-       alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-                       call_function_single_interrupt);
-
-       /* Low priority IPI to cleanup after moving an irq */
-       set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-       set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-#endif /* CONFIG_SMP */
-}
-
-static void __init apic_intr_init(void)
-{
-       smp_intr_init();
-
-#ifdef CONFIG_X86_64
-       alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-       alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-#endif
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
-       /* self generated IPI for local APIC timer */
-       alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-       /* generic IPI for platform specific use */
-       alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
-       /* IPI vectors for APIC spurious and error interrupts */
-       alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-       alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
-
-#ifdef CONFIG_X86_32
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
-       /* thermal monitor LVT interrupt */
-       alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-#endif
-}
-
-#ifdef CONFIG_X86_32
-/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *     Perform any necessary interrupt initialisation prior to setting up
- *     the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *     interrupts should be initialised here if the machine emulates a PC
- *     in any way.
- **/
-static void __init x86_quirk_pre_intr_init(void)
-{
-       if (x86_quirks->arch_pre_intr_init) {
-               if (x86_quirks->arch_pre_intr_init())
-                       return;
-       }
-       init_ISA_irqs();
-}
-#endif
-
-void __init native_init_IRQ(void)
-{
-       int i;
-
-#ifdef CONFIG_X86_32
-       /* Execute any quirks before the call gates are initialised: */
-       x86_quirk_pre_intr_init();
-#else
-       init_ISA_irqs();
-#endif
-
-       /*
-        * Cover the whole vector space, no vector can escape
-        * us. (some of these will be overridden and become
-        * 'special' SMP interrupts)
-        */
-       for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-#ifdef CONFIG_X86_32
-               /* SYSCALL_VECTOR was reserved in trap_init. */
-               if (i != SYSCALL_VECTOR)
-                       set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
-#else
-               /* IA32_SYSCALL_VECTOR was reserved in trap_init. */
-               if (i != IA32_SYSCALL_VECTOR)
-                       set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
-#endif
-       }
-
-       apic_intr_init();
-
-       if (!acpi_ioapic)
-               setup_irq(2, &irq2);
-
-#ifdef CONFIG_X86_32
-       /*
-        * Call quirks after call gates are initialised (usually add in
-        * the architecture specific gates):
-        */
-       x86_quirk_intr_init();
-
-       /*
-        * External FPU? Set up irq13 if so, for
-        * original braindamaged IBM FERR coupling.
-        */
-       if (boot_cpu_data.hard_math && !cpu_has_fpu)
-               setup_irq(FPU_IRQ, &fpu_irq);
-
-       irq_ctx_init(smp_processor_id());
-#endif
-}