Blackfin char driver for Blackfin on-chip OTP memory (v3)

initial char driver for otp memory
(only read supported atm ... needs real examples/docs for write support)

v2-v3:
 - fixup __initdata with __initconst, as we are heading for 2.6.26

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Jiri Slaby <jirislaby@gmail.com>

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index a87b89d..2906ee7 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -481,6 +481,34 @@ config BRIQ_PANEL
 
          It's safe to say N here.
 
+config BFIN_OTP
+       tristate "Blackfin On-Chip OTP Memory Support"
+       depends on BLACKFIN && (BF52x || BF54x)
+       default y
+       help
+         If you say Y here, you will get support for a character device
+         interface into the One Time Programmable memory pages that are
+         stored on the Blackfin processor.  This will not get you access
+         to the secure memory pages however.  You will need to write your
+         own secure code and reader for that.
+
+         To compile this driver as a module, choose M here: the module
+         will be called bfin-otp.
+
+         If unsure, it is safe to say Y.
+
+config BFIN_OTP_WRITE_ENABLE
+       bool "Enable writing support of OTP pages"
+       depends on BFIN_OTP
+       default n
+       help
+         If you say Y here, you will enable support for writing of the
+         OTP pages.  This is dangerous by nature as you can only program
+         the pages once, so only enable this option when you actually
+         need it so as to not inadvertently clobber data.
+
+         If unsure, say N.
+
 config PRINTER
        tristate "Parallel printer support"
        depends on PARPORT

diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 5407b76..4c1c584 100644 (file)
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_VIOTAPE)         += viotape.o
 obj-$(CONFIG_HVCS)             += hvcs.o
 obj-$(CONFIG_SGI_MBCS)         += mbcs.o
 obj-$(CONFIG_BRIQ_PANEL)       += briq_panel.o
+obj-$(CONFIG_BFIN_OTP)         += bfin-otp.o
 
 obj-$(CONFIG_PRINTER)          += lp.o
 obj-$(CONFIG_TIPAR)            += tipar.o

diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c
new file mode 100644 (file)
index 0000000..0a01329
--- /dev/null
+++ b/drivers/char/bfin-otp.c
@@ -0,0 +1,189 @@
+/*
+ * Blackfin On-Chip OTP Memory Interface
+ *  Supports BF52x/BF54x
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+
+#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
+#define stampit() stamp("here i am")
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-otp"
+#define PFX DRIVER_NAME ": "
+
+static DEFINE_MUTEX(bfin_otp_lock);
+
+/* OTP Boot ROM functions */
+#define _BOOTROM_OTP_COMMAND           0xEF000018
+#define _BOOTROM_OTP_READ              0xEF00001A
+#define _BOOTROM_OTP_WRITE             0xEF00001C
+
+static u32 (* const otp_command)(u32 command, u32 value) = (void *)_BOOTROM_OTP_COMMAND;
+static u32 (* const otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_READ;
+static u32 (* const otp_write)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_WRITE;
+
+/* otp_command(): defines for "command" */
+#define OTP_INIT             0x00000001
+#define OTP_CLOSE            0x00000002
+
+/* otp_{read,write}(): defines for "flags" */
+#define OTP_LOWER_HALF       0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF       0x00000001
+#define OTP_NO_ECC           0x00000010 /* do not use ECC */
+#define OTP_LOCK             0x00000020 /* sets page protection bit for page */
+#define OTP_ACCESS_READ      0x00001000
+#define OTP_ACCESS_READWRITE 0x00002000
+
+/* Return values for all functions */
+#define OTP_SUCCESS          0x00000000
+#define OTP_MASTER_ERROR     0x001
+#define OTP_WRITE_ERROR      0x003
+#define OTP_READ_ERROR       0x005
+#define OTP_ACC_VIO_ERROR    0x009
+#define OTP_DATA_MULT_ERROR  0x011
+#define OTP_ECC_MULT_ERROR   0x021
+#define OTP_PREV_WR_ERROR    0x041
+#define OTP_DATA_SB_WARN     0x100
+#define OTP_ECC_SB_WARN      0x200
+
+/**
+ *     bfin_otp_read - Read OTP pages
+ *
+ *     All reads must be in half page chunks (half page == 64 bits).
+ */
+static ssize_t bfin_otp_read(struct file *file, char __user *buff, size_t count, loff_t *pos)
+{
+       ssize_t bytes_done;
+       u32 page, flags, ret;
+       u64 content;
+
+       stampit();
+
+       if (count % sizeof(u64))
+               return -EMSGSIZE;
+
+       if (mutex_lock_interruptible(&bfin_otp_lock))
+               return -ERESTARTSYS;
+
+       bytes_done = 0;
+       page = *pos / (sizeof(u64) * 2);
+       while (bytes_done < count) {
+               flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
+               stamp("processing page %i (%s)", page, (flags == OTP_UPPER_HALF ? "upper" : "lower"));
+               ret = otp_read(page, flags, &content);
+               if (ret & OTP_MASTER_ERROR) {
+                       bytes_done = -EIO;
+                       break;
+               }
+               if (copy_to_user(buff + bytes_done, &content, sizeof(content))) {
+                       bytes_done = -EFAULT;
+                       break;
+               }
+               if (flags == OTP_UPPER_HALF)
+                       ++page;
+               bytes_done += sizeof(content);
+               *pos += sizeof(content);
+       }
+
+       mutex_unlock(&bfin_otp_lock);
+
+       return bytes_done;
+}
+
+#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE
+/**
+ *     bfin_otp_write - Write OTP pages
+ *
+ *     All writes must be in half page chunks (half page == 64 bits).
+ */
+static ssize_t bfin_otp_write(struct file *filp, const char __user *buff, size_t count, loff_t *pos)
+{
+       stampit();
+
+       if (count % sizeof(u64))
+               return -EMSGSIZE;
+
+       if (mutex_lock_interruptible(&bfin_otp_lock))
+               return -ERESTARTSYS;
+
+       /* need otp_init() documentation before this can be implemented */
+
+       mutex_unlock(&bfin_otp_lock);
+
+       return -EINVAL;
+}
+#else
+# define bfin_otp_write NULL
+#endif
+
+static struct file_operations bfin_otp_fops = {
+       .owner    = THIS_MODULE,
+       .read     = bfin_otp_read,
+       .write    = bfin_otp_write,
+};
+
+static struct miscdevice bfin_otp_misc_device = {
+       .minor    = MISC_DYNAMIC_MINOR,
+       .name     = DRIVER_NAME,
+       .fops     = &bfin_otp_fops,
+};
+
+/**
+ *     bfin_otp_init - Initialize module
+ *
+ *     Registers the device and notifier handler. Actual device
+ *     initialization is handled by bfin_otp_open().
+ */
+static int __init bfin_otp_init(void)
+{
+       int ret;
+
+       stampit();
+
+       ret = misc_register(&bfin_otp_misc_device);
+       if (ret) {
+               pr_init(KERN_ERR PFX "unable to register a misc device\n");
+               return ret;
+       }
+
+       pr_init(KERN_INFO PFX "initialized\n");
+
+       return 0;
+}
+
+/**
+ *     bfin_otp_exit - Deinitialize module
+ *
+ *     Unregisters the device and notifier handler. Actual device
+ *     deinitialization is handled by bfin_otp_close().
+ */
+static void __exit bfin_otp_exit(void)
+{
+       stampit();
+
+       misc_deregister(&bfin_otp_misc_device);
+}
+
+module_init(bfin_otp_init);
+module_exit(bfin_otp_exit);
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("Blackfin OTP Memory Interface");
+MODULE_LICENSE("GPL");