[PATCH] skge: whitespace fixes

Minor whitespace cleanups.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 0857be8..6b04b89 100644 (file)
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -248,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
        } else {
                u32 setting;
 
-               switch(ecmd->speed) {
+               switch (ecmd->speed) {
                case SPEED_1000:
                        if (ecmd->duplex == DUPLEX_FULL)
                                setting = SUPPORTED_1000baseT_Full;
@@ -1026,7 +1026,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
                        }
 
                        /* Check Duplex mismatch */
-                       switch(aux & PHY_B_AS_AN_RES_MSK) {
+                       switch (aux & PHY_B_AS_AN_RES_MSK) {
                        case PHY_B_RES_1000FD:
                                skge->duplex = DUPLEX_FULL;
                                break;
@@ -1097,7 +1097,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo)
        r |=  XM_MMU_NO_PRE;
        xm_write16(hw, port, XM_MMU_CMD,r);
 
-       switch(id1) {
+       switch (id1) {
        case PHY_BCOM_ID1_C0:
                /*
                 * Workaround BCOM Errata for the C0 type.

diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index fced3d2..2086809 100644 (file)
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1509,7 +1509,7 @@ enum {
        PHY_M_LEDC_TX_C_MSB     = 1<<0, /* Tx Control (MSB, 88E1111 only) */
 };
 
-#define PHY_M_LED_PULS_DUR(x)  (       ((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x)  (((x)<<12) & PHY_M_LEDC_PULS_MSK)
 
 enum {
        PULS_NO_STR     = 0,/* no pulse stretching */
@@ -1522,7 +1522,7 @@ enum {
        PULS_1300MS     = 7,/* 1.3 s to 2.7 s */
 };
 
-#define PHY_M_LED_BLINK_RT(x)  (       ((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x)  (((x)<<8) & PHY_M_LEDC_BL_R_MSK)
 
 enum {
        BLINK_42MS      = 0,/* 42 ms */
@@ -1602,9 +1602,9 @@ enum {
        PHY_M_FELP_LED0_MSK = 0xf, /* Bit  3.. 0: LED0 Mask (SPEED) */
 };
 
-#define PHY_M_FELP_LED2_CTRL(x)        (       ((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x)        (       ((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x)        (       ((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x)        (((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x)        (((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x)        (((x)<<0) & PHY_M_FELP_LED0_MSK)
 
 enum {
        LED_PAR_CTRL_COLX       = 0x00,
@@ -1640,7 +1640,7 @@ enum {
        PHY_M_MAC_MD_COPPER     = 5,/* Copper only */
        PHY_M_MAC_MD_1000BX     = 7,/* 1000Base-X only */
 };
-#define PHY_M_MAC_MODE_SEL(x)  (       ((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x)  (((x)<<7) & PHY_M_MAC_MD_MSK)
 
 /*****  PHY_MARV_PHY_CTRL (page 3)             16 bit r/w      LED Control Reg. *****/
 enum {
@@ -1650,10 +1650,10 @@ enum {
        PHY_M_LEDC_STA0_MSK     = 0xf, /* Bit  3.. 0: STAT0 LED Ctrl. Mask */
 };
 
-#define PHY_M_LEDC_LOS_CTRL(x) (       ((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x)        (       ((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x)        (       ((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x)        (       ((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x)        (((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x)        (((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x)        (((x)<<0) & PHY_M_LEDC_STA0_MSK)
 
 /* GMAC registers  */
 /* Port Registers */