[PATCH] sata_sil24: rename PMP related constants
authorTejun Heo <htejun@gmail.com>
Sun, 15 Oct 2006 23:47:18 +0000 (08:47 +0900)
committerJeff Garzik <jeff@garzik.org>
Sat, 2 Dec 2006 03:40:29 +0000 (22:40 -0500)
Rename PMP related constants for consistency.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/sata_sil24.c

index 169e200..6488258 100644 (file)
@@ -100,10 +100,10 @@ enum {
         */
        PORT_REGS_SIZE          = 0x2000,
 
-       PORT_LRAM               = 0x0000, /* 31 LRAM slots and PM regs */
+       PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
        PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 
-       PORT_PM                 = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
+       PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
                /* 32 bit regs */
        PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
        PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
@@ -139,9 +139,9 @@ enum {
        PORT_CS_INIT            = (1 << 2), /* port initialize */
        PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
        PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
-       PORT_CS_RESUME          = (1 << 6), /* port resume */
+       PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
        PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
-       PORT_CS_PM_EN           = (1 << 13), /* port multiplier enable */
+       PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
        PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
 
        /* PORT_IRQ_STAT/ENABLE_SET/CLR */
@@ -562,7 +562,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
 
        /* do SRST */
        prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
-       prb->fis[1] = 0; /* no PM yet */
+       prb->fis[1] = 0; /* no PMP yet */
 
        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
        writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
@@ -1050,7 +1050,8 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
                writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 
                /* Clear port multiplier enable and resume bits */
-               writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+               writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME,
+                      port + PORT_CTRL_CLR);
        }
 
        /* Turn on interrupts */