-EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
in the current interface altsetting.
- (b) ISO packet is biger than endpoint maxpacket
- (c) requested data transfer size is invalid (negative)
+ (b) ISO packet is larger than the endpoint maxpacket.
+ (c) requested data transfer length is invalid: negative
+ or too large for the host controller.
-ENOSPC This request would overcommit the usb bandwidth reserved
for periodic transfers (interrupt, isochronous).
M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
+T: quilt http://www.linuxtv.org/download/quilt/
S: Maintained
BUSLOGIC SCSI DRIVER
M: linux-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
+T: quilt http://www.linuxtv.org/download/quilt/
S: Supported
EATA-DMA SCSI DRIVER
M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
+T: quilt http://www.linuxtv.org/download/quilt/
S: Maintained
W1 DALLAS'S 1-WIRE BUS
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 15
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc4
NAME=Affluent Albatross
# *DOCUMENTATION*
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 15:46:42 2005
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:30:09 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_PXA_SHARPSL=y
CONFIG_PXA_SHARPSL_25x=y
# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_POODLE=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
+CONFIG_MACH_TOSA=y
CONFIG_PXA25x=y
CONFIG_PXA_SHARP_C7xx=y
+CONFIG_PXA_SSP=y
#
# Processor Type
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_PXA is not set
CONFIG_FB_W100=y
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 17:04:29 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-CONFIG_MACH_POODLE=y
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_APM=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 17:11:19 2005
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:26:52 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_PXA_SHARPSL=y
# CONFIG_PXA_SHARPSL_25x is not set
CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
CONFIG_MACH_SPITZ=y
CONFIG_MACH_BORZOI=y
CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
#
# Processor Type
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
#
# Input Device Drivers
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Monitoring support
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# USB Device Class drivers
#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
#include <asm/assembler.h>
#include <asm/domain.h>
-#include <asm/mach-types.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
@ and irqs disabled
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
- beq __error_p @ yes, error 'p'
+ beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
bne 1b
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
- * If we're using the NetWinder, we need to map in
- * the 16550-type serial port for the debug messages
+ * If we're using the NetWinder or CATS, we also need to map
+ * in the 16550-type serial port for the debug messages
*/
- teq r1, #MACH_TYPE_NETWINDER
- teqne r1, #MACH_TYPE_CATS
- bne 1f
add r0, r4, #0xff000000 >> 18
orr r3, r7, #0x7c000000
str r3, [r0]
-1:
#endif
#ifdef CONFIG_ARCH_RPC
/*
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART1,
+ .irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
config PXA_SHARPSL_27x
bool "Sharp PXA270 models (SL-Cxx00)"
select PXA27x
+ select IWMMXT
endchoice
bool "Enable Sharp SL-C700 (Corgi) Support"
depends PXA_SHARPSL_25x
select PXA_SHARP_C7xx
- select PXA_SSP
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
+ select I2C
+ select I2C_PXA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL
+ depends PXA_SHARPSL_25x
config PXA25x
bool
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
unsigned long vm_start;
unsigned long vm_end;
struct page *vm_pages;
+ int vm_active;
};
static struct vm_region consistent_head = {
list_add_tail(&new->vm_list, &c->vm_list);
new->vm_start = addr;
new->vm_end = addr + size;
+ new->vm_active = 1;
spin_unlock_irqrestore(&consistent_lock, flags);
return new;
struct vm_region *c;
list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_start == addr)
+ if (c->vm_active && c->vm_start == addr)
goto out;
}
c = NULL;
/*
* free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
*/
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
{
unsigned long flags, addr;
pte_t *ptep;
+ WARN_ON(irqs_disabled());
+
size = PAGE_ALIGN(size);
spin_lock_irqsave(&consistent_lock, flags);
-
c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
if (!c)
goto no_area;
+ c->vm_active = 0;
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
if ((c->vm_end - c->vm_start) != size) {
printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
__func__, c->vm_end - c->vm_start, size);
flush_tlb_kernel_range(c->vm_start, c->vm_end);
+ spin_lock_irqsave(&consistent_lock, flags);
list_del(&c->vm_list);
-
spin_unlock_irqrestore(&consistent_lock, flags);
kfree(c);
* space mappings, we can be lazy and remember that we may have dirty
* kernel cache lines for later. Otherwise, we assume we have
* aliasing mappings.
+ *
+ * Note that we disable the lazy flush for SMP.
*/
void flush_dcache_page(struct page *page)
{
struct address_space *mapping = page_mapping(page);
+#ifndef CONFIG_SMP
if (mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
- else {
+ else
+#endif
+ {
__flush_dcache_page(mapping, page);
if (mapping && cache_is_vivt())
__flush_dcache_aliases(mapping, page);
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri Nov 11 21:55:04 2005
+# Last update: Fri Nov 25 14:43:04 2005
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
maestro MACH_MAESTRO MAESTRO 843
tunge2 MACH_TUNGE2 TUNGE2 844
ixbbm MACH_IXBBM IXBBM 845
-mx27 MACH_MX27 MX27 846
+mx27ads MACH_MX27 MX27 846
ax8004 MACH_AX8004 AX8004 847
at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848
loft MACH_LOFT LOFT 849
magpie MACH_MAGPIE MAGPIE 850
-mx21 MACH_MX21 MX21 851
+mx21ads MACH_MX21 MX21 851
mb87m3400 MACH_MB87M3400 MB87M3400 852
mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853
davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854
mx21civ MACH_MX21CIV MX21CIV 883
mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884
xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885
-arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886
s3c2413 MACH_S3C2413 S3C2413 887
samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888
wg302v1 MACH_WG302V1 WG302V1 889
wg302v2 MACH_WG302V2 WG302V2 890
eb42x MACH_EB42X EB42X 891
iq331es MACH_IQ331ES IQ331ES 892
+cosydsp MACH_COSYDSP COSYDSP 893
+uplat7d MACH_UPLAT7D UPLAT7D 894
+ptdavinci MACH_PTDAVINCI PTDAVINCI 895
+mbus MACH_MBUS MBUS 896
+nadia2vb MACH_NADIA2VB NADIA2VB 897
+r1000 MACH_R1000 R1000 898
+hw90250 MACH_HW90250 HW90250 899
struct task_struct *task;
};
-#if SEM_DEBUG
+#if SEMAPHORE_DEBUG
void semtrace(struct semaphore *sem, const char *str)
{
if (sem->debug)
}
}
-void __init pcibios_penalize_isa_irq(int irq, int active)
+void __init pcibios_penalize_isa_irq(int irq)
{
}
memset((void *) empty_zero_page, 0, PAGE_SIZE);
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
if (num_physpages - num_mappedpages) {
pgd_t *pge;
pud_t *pue;
struct page *page = virt_to_page(pgd);
page->index = (unsigned long) pgd_list;
if (pgd_list)
- pgd_list->private = (unsigned long) &page->index;
+ set_page_private(pgd_list, (unsigned long) &page->index);
pgd_list = page;
set_page_private(page, (unsigned long)&pgd_list);
}
{
struct page *next, **pprev, *page = virt_to_page(pgd);
next = (struct page *) page->index;
- pprev = (struct page **)page_private(page);
+ pprev = (struct page **) page_private(page);
*pprev = next;
if (next)
- next->private = (unsigned long) pprev;
+ set_page_private(next, (unsigned long) pprev);
}
void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
return 0;
pmtmr_ioport = fadt->xpm_tmr_blk.address;
+ /*
+ * "X" fields are optional extensions to the original V1.0
+ * fields, so we must selectively expand V1.0 fields if the
+ * corresponding X field is zero.
+ */
+ if (!pmtmr_ioport)
+ pmtmr_ioport = fadt->V1_pm_tmr_blk;
} else {
/* FADT rev. 1 */
pmtmr_ioport = fadt->V1_pm_tmr_blk;
{
int irq = vector_to_irq(vector);
- move_irq(vector);
+ move_native_irq(vector);
ack_edge_ioapic_irq(irq);
}
{
int irq = vector_to_irq(vector);
- move_irq(vector);
+ move_native_irq(vector);
end_level_ioapic_irq(irq);
}
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
},
},
+ { /* Handle problems with rebooting on HP nc6120 */
+ .callback = set_bios_reboot,
+ .ident = "HP Compaq nc6120",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6120"),
+ },
+ },
{ }
};
#ifdef CONFIG_VIRTUAL_MEM_MAP
#include <linux/bootmem.h>
+EXPORT_SYMBOL(min_low_pfn); /* defined by bootmem.c, but not exported by generic code */
EXPORT_SYMBOL(max_low_pfn); /* defined by bootmem.c, but not exported by generic code */
#endif
switch(val) {
case DIE_BREAK:
/* err is break number from ia64_bad_break() */
- if (args->err == 0x80200 || args->err == 0x80300)
+ if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0)
if (pre_kprobes_handler(args))
ret = NOTIFY_STOP;
break;
siginfo_t siginfo;
int sig, code;
- /* break.b always sets cr.iim to 0, which causes problems for
- * debuggers. Get the real break number from the original instruction,
- * but only for kernel code. User space break.b is left alone, to
- * preserve the existing behaviour. All break codings have the same
- * format, so there is no need to check the slot type.
- */
- if (break_num == 0 && !user_mode(regs)) {
- struct ia64_psr *ipsr = ia64_psr(regs);
- unsigned long *bundle = (unsigned long *)regs->cr_iip;
- unsigned long slot;
- switch (ipsr->ri) {
- case 0: slot = (bundle[0] >> 5); break;
- case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
- default: slot = (bundle[1] >> 23); break;
- }
- break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
- }
-
/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
siginfo.si_imm = break_num;
return (void *)(port + NONCACHE_OFFSET);
}
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
static inline void *__port2addr_ata(unsigned long port)
{
static int dummy_reg;
switch (port) {
+ /* IDE0 CF */
case 0x1f0: return (void *)0xb4002000;
case 0x1f1: return (void *)0xb4012800;
case 0x1f2: return (void *)0xb4012002;
case 0x1f6: return (void *)0xb4012006;
case 0x1f7: return (void *)0xb4012806;
case 0x3f6: return (void *)0xb401200e;
+ /* IDE1 IDE */
+ case 0x170: return (void *)0xb4810000; /* Data 16bit */
+ case 0x171: return (void *)0xb4810002; /* Features / Error */
+ case 0x172: return (void *)0xb4810004; /* Sector count */
+ case 0x173: return (void *)0xb4810006; /* Sector number */
+ case 0x174: return (void *)0xb4810008; /* Cylinder low */
+ case 0x175: return (void *)0xb481000a; /* Cylinder high */
+ case 0x176: return (void *)0xb481000c; /* Device head */
+ case 0x177: return (void *)0xb481000e; /* Command */
+ case 0x376: return (void *)0xb480800c; /* Device control / Alt status */
+
default: return (void *)&dummy_reg;
}
}
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inb(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
return *(volatile unsigned char *)__port2addr_ata(port);
}
#endif
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
return *(volatile unsigned short *)__port2addr_ata(port);
}
#endif
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outb(b, PORT2ADDR_NE(port));
else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
*(volatile unsigned char *)__port2addr_ata(port) = b;
} else
#endif
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outw(w, PORT2ADDR_NE(port));
else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
*(volatile unsigned short *)__port2addr_ata(port) = w;
} else
#endif
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
unsigned char *buf = addr;
unsigned char *portp = __port2addr_ata(port);
while (count--)
pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
count, 1);
#endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*buf++ = *(volatile unsigned short *)portp;
portp = PORT2ADDR_NE(port);
while (count--)
_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*(volatile unsigned char *)portp = *buf++;
portp = PORT2ADDR_NE(port);
while (count--)
*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*(volatile unsigned short *)portp = *buf++;
disable_mappi3_irq(M32R_IRQ_INT1);
#endif /* CONFIG_USB */
- /* ICUCR40: CFC IREQ */
+ /* CFC IREQ */
irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type;
irq_desc[PLD_IRQ_CFIREQ].action = 0;
disable_mappi3_irq(PLD_IRQ_CFIREQ);
#if defined(CONFIG_M32R_CFC)
- /* ICUCR41: CFC Insert */
+ /* ICUCR41: CFC Insert & eject */
irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type;
irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
disable_mappi3_irq(PLD_IRQ_CFC_INSERT);
- /* ICUCR42: CFC Eject */
- irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
- irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type;
- irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
- irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */
- icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
- disable_mappi3_irq(PLD_IRQ_CFC_EJECT);
#endif /* CONFIG_M32R_CFC */
+
+ /* IDE IREQ */
+ irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED;
+ irq_desc[PLD_IRQ_IDEIREQ].handler = &mappi3_irq_type;
+ irq_desc[PLD_IRQ_IDEIREQ].action = 0;
+ irq_desc[PLD_IRQ_IDEIREQ].depth = 1; /* disable nested irq */
+ icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+ disable_mappi3_irq(PLD_IRQ_IDEIREQ);
+
}
#if defined(CONFIG_SMC91X)
return -EFAULT;
local_irq_save(flags);
oldval = *addr;
- *addr = 1;
+ if (!oldval)
+ *addr = 1;
local_irq_restore(flags);
return oldval;
}
_raw_spin_lock(&tas_lock);
oldval = *addr;
- *addr = 1;
+ if (!oldval)
+ *addr = 1;
_raw_spin_unlock(&tas_lock);
return oldval;
mainmenu "Linux/MIPS Kernel Configuration"
-source "init/Kconfig"
-
menu "Machine selection"
choice
bool
default y
+source "init/Kconfig"
+
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
-/* not correct for db1550 */
-static BCSR * const bcsr = (BCSR *)0xAE000000;
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ bcsr->swreset = 0x0000;
}
void __init board_setup(void)
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
- au_writel(0, 0xAE000010); /* turn off pcmcia power */
+ bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
/* enable GPIO[31:0] inputs */
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_DB1000; /* set the platform # */
+
+ /* Set the platform # */
+#if defined (CONFIG_MIPS_DB1550)
+ mips_machtype = MACH_DB1550;
+#elif defined (CONFIG_MIPS_DB1500)
+ mips_machtype = MACH_DB1500;
+#elif defined (CONFIG_MIPS_DB1100)
+ mips_machtype = MACH_DB1100;
+#else
+ mips_machtype = MACH_DB1000;
+#endif
prom_init_cmdline();
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 12:14:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:52 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:04:36 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:54 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT_BKL is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:04:39 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:55 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:04:42 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:57 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:11:04 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:59 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:11:07 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:00 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:11:10 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:03 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON is not set
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:11:15 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:05 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:11:18 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:07 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:04 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:09 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:08 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:11 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Fri Nov 11 13:29:30 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:13 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_TC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:15 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:14 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_ISA=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov 9 11:05:12 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:16 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:22 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:18 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 13:38:41 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:20 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_EISA=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Sun Nov 13 23:56:52 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:21 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_INSANE_LARGE is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:32 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:24 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 13:42:45 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:26 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:38 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:27 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:41 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:29 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:44 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:31 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_RTC_DS1742=y
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:47 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:33 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 13:42:55 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:35 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:05:55 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:37 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:12:01 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:39 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 14:01:36 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:41 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:05 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:43 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:08 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:44 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:11 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:46 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:12:31 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:48 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:14:25 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:50 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:15:34 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:52 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:25 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:54 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 14:02:38 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:58 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:31 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:00 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SHMEM is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_ISA=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 14:02:45 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:03 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+# CONFIG_KOBJECT_UEVENT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 14:02:50 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:06 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_EISA=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ANYDATA=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:43 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:09 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_PREEMPT_BKL=y
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:45 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:10 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:49 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:12 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov 9 11:11:47 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:15 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 11:17:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:17 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_ISA=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 23:06:59 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:19 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
CONFIG_PREEMPT_BKL=y
#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 12:13:58 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:49 2005
#
CONFIG_MIPS=y
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_PREEMPT is not set
#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_EISA=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
static void jmr3927_irq_end(unsigned int irq)
{
- jmr3927_irq_enable(irq);
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ jmr3927_irq_enable(irq);
}
static void jmr3927_irq_disable(unsigned int irq_nr)
struct tb_irq_space* sp;
unsigned long flags;
- spinlock_irqsave(&jmr3927_irq_lock, flags);
+ spin_lock_irqsave(&jmr3927_irq_lock, flags);
for (sp = tb_irq_spaces; sp; sp = sp->next) {
if (sp->start_irqno <= irq_nr &&
irq_nr < sp->start_irqno + sp->nr_irqs) {
break;
}
}
- spinlock_irqrestore(&jmr3927_irq_lock, flags);
+ spin_unlock_irqrestore(&jmr3927_irq_lock, flags);
}
static void jmr3927_irq_enable(unsigned int irq_nr)
struct tb_irq_space* sp;
unsigned long flags;
- spinlock_irqsave(&jmr3927_irq_lock, flags);
+ spin_lock_irqsave(&jmr3927_irq_lock, flags);
for (sp = tb_irq_spaces; sp; sp = sp->next) {
if (sp->start_irqno <= irq_nr &&
irq_nr < sp->start_irqno + sp->nr_irqs) {
break;
}
}
- spinlock_irqrestore(&jmr3927_irq_lock, flags);
+ spin_unlock_irqrestore(&jmr3927_irq_lock, flags);
}
/*
/* update IRCSR */
tx3927_ircptr->imr = 0;
tx3927_ircptr->imr = irc_elevel;
+ /* flush write buffer */
+ (void)tx3927_ircptr->ssr;
}
+
static void unmask_irq_irc(int irq_nr, int space_id)
{
volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
do_IRQ(irq + JMR3927_IRQ_IRC, regs);
}
-static void jmr3927_ioc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
int i;
do_IRQ(irq, regs);
}
}
+ return IRQ_HANDLED;
}
static struct irqaction ioc_action = {
jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
};
-static void jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned char istat = jmr3927_isac_reg_in(JMR3927_ISAC_INTS2_ADDR);
int i;
do_IRQ(irq, regs);
}
}
+ return IRQ_HANDLED;
}
static struct irqaction isac_action = {
};
-static void jmr3927_isaerr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+static irqreturn_t jmr3927_isaerr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
{
printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq);
+
+ return IRQ_HANDLED;
}
static struct irqaction isaerr_action = {
jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL,
};
-static void jmr3927_pcierr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+static irqreturn_t jmr3927_pcierr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
{
printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+
+ return IRQ_HANDLED;
}
static struct irqaction pcierr_action = {
jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
#include <asm/mipsregs.h>
#include <asm/traps.h>
+extern void puts(unsigned char *cp);
+
/* Tick Timer divider */
#define JMR3927_TIMER_CCD 0 /* 1/2 */
#define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
c->isa_level = MIPS_CPU_ISA_IV;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
c->isa_level = MIPS_CPU_ISA_IV;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
/*
* Don't let your children do this ...
*/
- if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
- do_syscall_trace(regs, 1);
__asm__ __volatile__(
"move\t$29,%0\n\t"
"j\tsyscall_exit"
/*
* Don't let your children do this ...
*/
- if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
- do_syscall_trace(regs, 1);
__asm__ __volatile__(
"move\t$29,%0\n\t"
"j\tsyscall_exit"
li a1, 0
jal do_syscall_trace
+ move t0, s0
+ RESTORE_STATIC
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
- jalr s0
+ jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sw zero, PT_R7(sp) # success
sw v0, PT_R2(sp) # result
- /* Success, so skip usual error handling garbage. */
- lw a2, TI_FLAGS($28) # syscall tracing enabled?
- li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
- and t0, a2, t0
- bnez t0, 1f
-
- j o32_syscall_exit
-
-1: SAVE_STATIC
- move a0, sp
- li a1, 1
- jal do_syscall_trace
- j syscall_exit
+ j o32_syscall_exit # continue like a normal syscall
no_mem: li v0, -ENOMEM
jr ra
li a1, 0
jal do_syscall_trace
+ move t0, s0
+ RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a2, PT_R6(sp)
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
- jalr s0
+ jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd zero, PT_R7(sp) # success
sd v0, PT_R2(sp) # result
- /* Success, so skip usual error handling garbage. */
- li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
- LONG_L a2, TI_FLAGS($28) # syscall tracing enabled?
- and t0, a2, t0
- bnez t0, 1f
-
- j n64_syscall_exit
-
-1: SAVE_STATIC
- move a0, sp
- li a1, 1
- jal do_syscall_trace
- j syscall_exit
+ j n64_syscall_exit # continue like a normal syscall
no_mem: li v0, -ENOMEM
jr ra
li a1, 0
jal do_syscall_trace
+ move t0, s0
+ RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a2, PT_R6(sp)
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
- jalr s0
+ jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
li a1, 0
jal do_syscall_trace
+ move t0, s0
+ RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a2, PT_R6(sp)
ld a5, PT_R9(sp)
ld a6, PT_R10(sp)
ld a7, PT_R11(sp) # For indirect syscalls
- jalr s0
+ jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
/*
* Don't let your children do this ...
*/
- if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
- do_syscall_trace(®s, 1);
__asm__ __volatile__(
"move\t$29, %0\n\t"
"j\tsyscall_exit"
/*
* Don't let your children do this ...
*/
- if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
- do_syscall_trace(®s, 1);
__asm__ __volatile__(
"move\t$29, %0\n\t"
"j\tsyscall_exit"
switch (rd) {
case 29:
regs->regs[rt] = ti->tp_value;
- break;
+ return 0;
default:
return -EFAULT;
}
}
- return 0;
+ /* Not ours. */
+ return -EFAULT;
}
asmlinkage void do_ov(struct pt_regs *regs)
page = virt_to_page(empty_zero_page);
while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
set_bit(PG_reserved, &page->flags);
- set_page_count(page, 0);
+ reset_page_mapcount(page);
page++;
}
#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
#include <asm/bootinfo.h>
void __init prom_init(void)
{
- add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
+ int *cmdline;
+
+ cmdline = (int *) (CKSEG0 + (0x10 << 20) - 260);
+ if (*cmdline == 0x12345678) {
+ if (*(char *)(cmdline + 1))
+ strcpy (arcs_cmdline, (char *)(cmdline + 1));
+ add_memory_region(0x0<<20, cmdline[-1], BOOT_MEM_RAM);
+ } else {
+ add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
+ }
}
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(__flush_icache_range);
-#else
+#ifndef CONFIG_PPC64
EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(flush_icache_range);
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
#endif
+EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
#ifdef CONFIG_SMP
}
#endif /* CONFIG_SPE */
+/*
+ * If we are doing lazy switching of CPU state (FP, altivec or SPE),
+ * and the current task has some state, discard it.
+ */
+static inline void discard_lazy_cpu_state(void)
+{
+#ifndef CONFIG_SMP
+ preempt_disable();
+ if (last_task_used_math == current)
+ last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+ if (last_task_used_altivec == current)
+ last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ if (last_task_used_spe == current)
+ last_task_used_spe = NULL;
+#endif
+ preempt_enable();
+#endif /* CONFIG_SMP */
+}
+
int set_dabr(unsigned long dabr)
{
if (ppc_md.set_dabr)
void exit_thread(void)
{
kprobe_flush_task(current);
-
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
}
void flush_thread(void)
t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
#endif
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
#ifdef CONFIG_PPC64 /* for now */
if (current->thread.dabr) {
}
#endif
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
va_end(list);
for (i = 0; i < nret; i++)
- rets[nargs+i] = 0;
+ args.args[nargs+i] = 0;
if (enter_prom(&args, RELOC(prom_entry)) < 0)
return PROM_ERROR;
struct page *pg = virt_to_page(vdso32_kbase +
i*PAGE_SIZE);
struct page *upg = (vma && vma->vm_mm) ?
- follow_page(vma->vm_mm, vma->vm_start +
- i*PAGE_SIZE, 0)
+ follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
: NULL;
dump_one_vdso_page(pg, upg);
}
struct page *pg = virt_to_page(vdso64_kbase +
i*PAGE_SIZE);
struct page *upg = (vma && vma->vm_mm) ?
- follow_page(vma->vm_mm, vma->vm_start +
- i*PAGE_SIZE, 0)
+ follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
: NULL;
dump_one_vdso_page(pg, upg);
}
skip=64 bs=1k
$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
- $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT)
+ $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
- $(ENTRYPOINT)
+ $(entrypoint-y)
$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
EXPORT_SYMBOL(flush_instruction_cache);
EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(flush_icache_range);
+EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
EXPORT_SYMBOL(flush_icache_user_range);
EXPORT_SYMBOL(flush_dcache_page);
void exit_thread(void)
{
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
}
void flush_thread(void)
{
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
}
void
regs->nip = nip;
regs->gpr[1] = sp;
regs->msr = MSR_USER;
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
- time = (int)666666/freq;
+ time = (int)66666666/freq;
+
/* due to PCI Local Bus spec, some devices needs to wait such a long
time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
- pte_t oldpage = *pte;
- pte_clear(mm, address, pte);
- set_pte(pte, mk_pte_io(offset, prot, space));
+ set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
address += PAGE_SIZE;
offset += PAGE_SIZE;
pte++;
}
int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
+ unsigned long pfn, unsigned long size, pgprot_t prot)
{
int error = 0;
pgd_t * dir;
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
/* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = (offset >> PAGE_SHIFT) |
+ ((unsigned long)space << 28UL);
prot = __pgprot(pg_iobits);
offset -= from;
#include <asm/page.h>
#include <asm/tlbflush.h>
+static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
+{
+ pte_t pte;
+ pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
+ ~(unsigned long)_PAGE_CACHE);
+ pte_val(pte) |= (((unsigned long)space) << 32);
+ return pte;
+}
+
/* Remap IO memory, the same way as remap_pfn_range(), but use
* the obio memory space.
*
BUG_ON(!pte_none(*pte));
set_pte_at(mm, address, pte, entry);
address += PAGE_SIZE;
+ pte_val(entry) += PAGE_SIZE;
pte++;
} while (address < curend);
} while (address < end);
struct mm_struct *mm = vma->vm_mm;
int space = GET_IOSPACE(pfn);
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ unsigned long phys_base;
+
+ phys_base = offset | (((unsigned long) space) << 32UL);
/* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = phys_base >> PAGE_SHIFT;
prot = __pgprot(pg_iobits);
offset -= from;
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
- default y
---help---
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
# ACPI Boot-Time Table Parsing
#
obj-y += tables.o
-obj-y += blacklist.o
+obj-$(CONFIG_X86) += blacklist.o
#
# ACPI Core Subsystem (Interpreter)
return_VALUE(0);
}
+static void *processor_device_array[NR_CPUS];
+
static int acpi_processor_start(struct acpi_device *device)
{
int result = 0;
BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0));
+ /*
+ * Buggy BIOS check
+ * ACPI id of processors can be reported wrongly by the BIOS.
+ * Don't trust it blindly
+ */
+ if (processor_device_array[pr->id] != NULL &&
+ processor_device_array[pr->id] != (void *)device) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "BIOS reporting wrong ACPI id"
+ "for the processor\n"));
+ return_VALUE(-ENODEV);
+ }
+ processor_device_array[pr->id] = (void *)device;
+
processors[pr->id] = pr;
result = acpi_processor_add_fs(device);
static void acpi_safe_halt(void)
{
- int polling = test_thread_flag(TIF_POLLING_NRFLAG);
- if (polling) {
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb__after_clear_bit();
- }
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb__after_clear_bit();
if (!need_resched())
safe_halt();
- if (polling)
- set_thread_flag(TIF_POLLING_NRFLAG);
+ set_thread_flag(TIF_POLLING_NRFLAG);
}
static atomic_t c3_cpu_count;
cx->usage++;
+#ifdef CONFIG_HOTPLUG_CPU
+ /*
+ * Check for P_LVL2_UP flag before entering C2 and above on
+ * an SMP system. We do it here instead of doing it at _CST/P_LVL
+ * detection phase, to work cleanly with logical CPU hotplug.
+ */
+ if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+ !pr->flags.has_cst && acpi_fadt.plvl2_up)
+ cx->type = ACPI_STATE_C1;
+#endif
/*
* Sleep:
* ------
* Invoke the current Cx state to put the processor to sleep.
*/
+ if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb__after_clear_bit();
+ if (need_resched()) {
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ return;
+ }
+ }
+
switch (cx->type) {
case ACPI_STATE_C1:
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Re-enable interrupts */
local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
/* Compute time (ticks) that we were actually asleep */
sleep_ticks =
ticks_elapsed(t1, t2) - cx->latency_ticks - C2_OVERHEAD;
/* Re-enable interrupts */
local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
/* Compute time (ticks) that we were actually asleep */
sleep_ticks =
ticks_elapsed(t1, t2) - cx->latency_ticks - C3_OVERHEAD;
pr->power.states[ACPI_STATE_C0].valid = 1;
pr->power.states[ACPI_STATE_C1].valid = 1;
+#ifndef CONFIG_HOTPLUG_CPU
+ /*
+ * Check for P_LVL2_UP flag before entering C2 and above on
+ * an SMP system.
+ */
+ if ((num_online_cpus() > 1) && acpi_fadt.plvl2_up)
+ return_VALUE(-ENODEV);
+#endif
+
/* determine C2 and C3 address from pblk */
pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* Validate number of power states discovered */
if (pr->power.count < 2)
- status = -ENODEV;
+ status = -EFAULT;
end:
acpi_os_free(buffer.pointer);
* this function */
result = acpi_processor_get_power_info_cst(pr);
- if ((result) || (acpi_processor_power_verify(pr) < 2)) {
+ if (result == -ENODEV)
result = acpi_processor_get_power_info_fadt(pr);
- if ((result) || (acpi_processor_power_verify(pr) < 2))
- result = acpi_processor_get_power_info_default_c1(pr);
- }
+
+ if ((result) || (acpi_processor_power_verify(pr) < 2))
+ result = acpi_processor_get_power_info_default_c1(pr);
/*
* Set Default Policy
static int cpu_has_cpufreq(unsigned int cpu)
{
struct cpufreq_policy policy;
- if (!acpi_thermal_cpufreq_is_init)
- return -ENODEV;
- if (!cpufreq_get_policy(&policy, cpu))
+ if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu))
return -ENODEV;
return 0;
}
if (!cpu_has_cpufreq(cpu))
return -ENODEV;
- if (cpufreq_thermal_reduction_pctg[cpu] >= 20) {
+ if (cpufreq_thermal_reduction_pctg[cpu] > 20)
cpufreq_thermal_reduction_pctg[cpu] -= 20;
- cpufreq_update_policy(cpu);
- return 0;
- }
-
- return -ERANGE;
+ else
+ cpufreq_thermal_reduction_pctg[cpu] = 0;
+ cpufreq_update_policy(cpu);
+ /* We reached max freq again and can leave passive mode */
+ return !cpufreq_thermal_reduction_pctg[cpu];
}
static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
int result = 0;
struct acpi_processor *pr = NULL;
struct acpi_device *device = NULL;
- int tx = 0;
+ int tx = 0, max_tx_px = 0;
ACPI_FUNCTION_TRACE("acpi_processor_set_thermal_limit");
/* if going down: T-states first, P-states later */
if (pr->flags.throttling) {
- if (tx == 0)
+ if (tx == 0) {
+ max_tx_px = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"At minimum throttling state\n"));
- else {
+ } else {
tx--;
goto end;
}
}
result = acpi_thermal_cpufreq_decrease(pr->id);
- if (result == -ERANGE)
+ if (result) {
+ /*
+ * We only could get -ERANGE, 1 or 0.
+ * In the first two cases we reached max freq again.
+ */
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"At minimum performance state\n"));
+ max_tx_px = 1;
+ } else
+ max_tx_px = 0;
break;
}
pr->limit.thermal.px, pr->limit.thermal.tx));
} else
result = 0;
-
- return_VALUE(result);
+ if (max_tx_px)
+ return_VALUE(1);
+ else
+ return_VALUE(result);
}
int acpi_processor_get_limit_info(struct acpi_processor *pr)
*
* TBD: Assumes LDM provides driver hot-plug capability.
*/
- result = acpi_bus_find_driver(device);
+ acpi_bus_find_driver(device);
end:
if (!result)
#define _COMPONENT ACPI_THERMAL_COMPONENT
ACPI_MODULE_NAME("acpi_thermal")
- MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
MODULE_LICENSE("GPL");
return_VALUE(0);
}
-static int acpi_thermal_passive(struct acpi_thermal *tz)
+static void acpi_thermal_passive(struct acpi_thermal *tz)
{
- int result = 0;
+ int result = 1;
struct acpi_thermal_passive *passive = NULL;
int trend = 0;
int i = 0;
ACPI_FUNCTION_TRACE("acpi_thermal_passive");
if (!tz || !tz->trips.passive.flags.valid)
- return_VALUE(-EINVAL);
+ return;
passive = &(tz->trips.passive);
trend, passive->tc1, tz->temperature,
tz->last_temperature, passive->tc2,
tz->temperature, passive->temperature));
- tz->trips.passive.flags.enabled = 1;
+ passive->flags.enabled = 1;
/* Heating up? */
if (trend > 0)
for (i = 0; i < passive->devices.count; i++)
handles[i],
ACPI_PROCESSOR_LIMIT_INCREMENT);
/* Cooling off? */
- else if (trend < 0)
+ else if (trend < 0) {
for (i = 0; i < passive->devices.count; i++)
- acpi_processor_set_thermal_limit(passive->
- devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT);
+ /*
+ * assume that we are on highest
+ * freq/lowest thrott and can leave
+ * passive mode, even in error case
+ */
+ if (!acpi_processor_set_thermal_limit
+ (passive->devices.handles[i],
+ ACPI_PROCESSOR_LIMIT_DECREMENT))
+ result = 0;
+ /*
+ * Leave cooling mode, even if the temp might
+ * higher than trip point This is because some
+ * machines might have long thermal polling
+ * frequencies (tsp) defined. We will fall back
+ * into passive mode in next cycle (probably quicker)
+ */
+ if (result) {
+ passive->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Disabling passive cooling, still above threshold,"
+ " but we are cooling down\n"));
+ }
+ }
+ return;
}
/*
* and avoid thrashing around the passive trip point. Note that we
* assume symmetry.
*/
- else if (tz->trips.passive.flags.enabled) {
- for (i = 0; i < passive->devices.count; i++)
- result =
- acpi_processor_set_thermal_limit(passive->devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT);
- if (result == 1) {
- tz->trips.passive.flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling (zone is cool)\n"));
- }
+ if (!passive->flags.enabled)
+ return;
+ for (i = 0; i < passive->devices.count; i++)
+ if (!acpi_processor_set_thermal_limit
+ (passive->devices.handles[i],
+ ACPI_PROCESSOR_LIMIT_DECREMENT))
+ result = 0;
+ if (result) {
+ passive->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Disabling passive cooling (zone is cool)\n"));
}
-
- return_VALUE(0);
}
-static int acpi_thermal_active(struct acpi_thermal *tz)
+static void acpi_thermal_active(struct acpi_thermal *tz)
{
int result = 0;
struct acpi_thermal_active *active = NULL;
ACPI_FUNCTION_TRACE("acpi_thermal_active");
if (!tz)
- return_VALUE(-EINVAL);
+ return;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-
active = &(tz->trips.active[i]);
if (!active || !active->flags.valid)
break;
-
- /*
- * Above Threshold?
- * ----------------
- * If not already enabled, turn ON all cooling devices
- * associated with this active threshold.
- */
if (tz->temperature >= active->temperature) {
+ /*
+ * Above Threshold?
+ * ----------------
+ * If not already enabled, turn ON all cooling devices
+ * associated with this active threshold.
+ */
if (active->temperature > maxtemp)
- tz->state.active_index = i, maxtemp =
- active->temperature;
- if (!active->flags.enabled) {
- for (j = 0; j < active->devices.count; j++) {
- result =
- acpi_bus_set_power(active->devices.
- handles[j],
- ACPI_STATE_D0);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'on'\n",
- active->
- devices.
- handles[j]));
- continue;
- }
- active->flags.enabled = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'on'\n",
- active->devices.
- handles[j]));
- }
- }
- }
- /*
- * Below Threshold?
- * ----------------
- * Turn OFF all cooling devices associated with this
- * threshold.
- */
- else if (active->flags.enabled) {
+ tz->state.active_index = i;
+ maxtemp = active->temperature;
+ if (active->flags.enabled)
+ continue;
for (j = 0; j < active->devices.count; j++) {
result =
acpi_bus_set_power(active->devices.
handles[j],
- ACPI_STATE_D3);
+ ACPI_STATE_D0);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'off'\n",
+ "Unable to turn cooling device [%p] 'on'\n",
active->devices.
handles[j]));
continue;
}
- active->flags.enabled = 0;
+ active->flags.enabled = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'off'\n",
+ "Cooling device [%p] now 'on'\n",
active->devices.handles[j]));
}
+ continue;
+ }
+ if (!active->flags.enabled)
+ continue;
+ /*
+ * Below Threshold?
+ * ----------------
+ * Turn OFF all cooling devices associated with this
+ * threshold.
+ */
+ for (j = 0; j < active->devices.count; j++) {
+ result = acpi_bus_set_power(active->devices.handles[j],
+ ACPI_STATE_D3);
+ if (result) {
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Unable to turn cooling device [%p] 'off'\n",
+ active->devices.handles[j]));
+ continue;
+ }
+ active->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Cooling device [%p] now 'off'\n",
+ active->devices.handles[j]));
}
}
-
- return_VALUE(0);
}
static void acpi_thermal_check(void *context);
* Again, separated from the above two to allow independent policy
* decisions.
*/
- if (tz->trips.critical.flags.enabled)
- tz->state.critical = 1;
- if (tz->trips.hot.flags.enabled)
- tz->state.hot = 1;
- if (tz->trips.passive.flags.enabled)
- tz->state.passive = 1;
+ tz->state.critical = tz->trips.critical.flags.enabled;
+ tz->state.hot = tz->trips.hot.flags.enabled;
+ tz->state.passive = tz->trips.passive.flags.enabled;
+ tz->state.active = 0;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- if (tz->trips.active[i].flags.enabled)
- tz->state.active = 1;
+ tz->state.active |= tz->trips.active[i].flags.enabled;
/*
* Calculate Sleep Time
ACPI_FUNCTION_TRACE("acpi_video_device_write_brightness");
- if (!dev || count + 1 > sizeof str)
+ if (!dev || !dev->brightness || count + 1 > sizeof str)
return_VALUE(-EINVAL);
if (copy_from_user(str, buffer, count))
menu "ATM drivers"
depends on NETDEVICES && ATM
+config ATM_DUMMY
+ tristate "Dummy ATM driver"
+ depends on ATM
+ help
+ Dummy ATM driver. Useful for proxy signalling, testing,
+ and development. If unsure, say N.
+
config ATM_TCP
tristate "ATM over TCP"
depends on INET && ATM
obj-$(CONFIG_ATM_IDT77252) += suni.o
endif
+obj-$(CONFIG_ATM_DUMMY) += adummy.o
obj-$(CONFIG_ATM_TCP) += atmtcp.o
obj-$(CONFIG_ATM_FIRESTREAM) += firestream.o
obj-$(CONFIG_ATM_LANAI) += lanai.o
--- /dev/null
+/*
+ * adummy.c: a dummy ATM driver
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <linux/atmdev.h>
+#include <linux/atm.h>
+#include <linux/sonet.h>
+
+/* version definition */
+
+#define DRV_VERSION "1.0"
+
+#define DEV_LABEL "adummy"
+
+#define ADUMMY_DEV(dev) ((struct adummy_dev *) (dev)->dev_data)
+
+struct adummy_dev {
+ struct atm_dev *atm_dev;
+
+ struct list_head entry;
+};
+
+/* globals */
+
+static LIST_HEAD(adummy_devs);
+
+static int __init
+adummy_start(struct atm_dev *dev)
+{
+ dev->ci_range.vpi_bits = 4;
+ dev->ci_range.vci_bits = 12;
+
+ return 0;
+}
+
+static int
+adummy_open(struct atm_vcc *vcc)
+{
+ short vpi = vcc->vpi;
+ int vci = vcc->vci;
+
+ if (vci == ATM_VCI_UNSPEC || vpi == ATM_VPI_UNSPEC)
+ return 0;
+
+ set_bit(ATM_VF_ADDR, &vcc->flags);
+ set_bit(ATM_VF_READY, &vcc->flags);
+
+ return 0;
+}
+
+static void
+adummy_close(struct atm_vcc *vcc)
+{
+ clear_bit(ATM_VF_READY, &vcc->flags);
+ clear_bit(ATM_VF_ADDR, &vcc->flags);
+}
+
+static int
+adummy_send(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ if (vcc->pop)
+ vcc->pop(vcc, skb);
+ else
+ dev_kfree_skb_any(skb);
+ atomic_inc(&vcc->stats->tx);
+
+ return 0;
+}
+
+static int
+adummy_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
+{
+ int left = *pos;
+
+ if (!left--)
+ return sprintf(page, "version %s\n", DRV_VERSION);
+
+ return 0;
+}
+
+static struct atmdev_ops adummy_ops =
+{
+ .open = adummy_open,
+ .close = adummy_close,
+ .send = adummy_send,
+ .proc_read = adummy_proc_read,
+ .owner = THIS_MODULE
+};
+
+static int __init adummy_init(void)
+{
+ struct atm_dev *atm_dev;
+ struct adummy_dev *adummy_dev;
+ int err = 0;
+
+ printk(KERN_ERR "adummy: version %s\n", DRV_VERSION);
+
+ adummy_dev = (struct adummy_dev *) kmalloc(sizeof(struct adummy_dev),
+ GFP_KERNEL);
+ if (!adummy_dev) {
+ printk(KERN_ERR DEV_LABEL ": kmalloc() failed\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ memset(adummy_dev, 0, sizeof(struct adummy_dev));
+
+ atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, 0);
+ if (!atm_dev) {
+ printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
+ err = -ENODEV;
+ goto out_kfree;
+ }
+
+ adummy_dev->atm_dev = atm_dev;
+ atm_dev->dev_data = adummy_dev;
+
+ if (adummy_start(atm_dev)) {
+ printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n");
+ err = -ENODEV;
+ goto out_unregister;
+ }
+
+ list_add(&adummy_dev->entry, &adummy_devs);
+out:
+ return err;
+
+out_unregister:
+ atm_dev_deregister(atm_dev);
+out_kfree:
+ kfree(adummy_dev);
+ goto out;
+}
+
+static void __exit adummy_cleanup(void)
+{
+ struct adummy_dev *adummy_dev, *next;
+
+ list_for_each_entry_safe(adummy_dev, next, &adummy_devs, entry) {
+ atm_dev_deregister(adummy_dev->atm_dev);
+ kfree(adummy_dev);
+ }
+}
+
+module_init(adummy_init);
+module_exit(adummy_cleanup);
+
+MODULE_AUTHOR("chas williams <chas@cmf.nrl.navy.mil>");
+MODULE_DESCRIPTION("dummy ATM driver");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/* drivers/atm/atmdev_init.c - ATM device driver initialization */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-
-#ifdef CONFIG_ATM_ZATM
-extern int zatm_detect(void);
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
-extern int amb_detect(void);
-#endif
-#ifdef CONFIG_ATM_HORIZON
-extern int hrz_detect(void);
-#endif
-#ifdef CONFIG_ATM_FORE200E
-extern int fore200e_detect(void);
-#endif
-#ifdef CONFIG_ATM_LANAI
-extern int lanai_detect(void);
-#endif
-
-
-/*
- * For historical reasons, atmdev_init returns the number of devices found.
- * Note that some detections may not go via atmdev_init (e.g. eni.c), so this
- * number is meaningless.
- */
-
-int __init atmdev_init(void)
-{
- int devs;
-
- devs = 0;
-#ifdef CONFIG_ATM_ZATM
- devs += zatm_detect();
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
- devs += amb_detect();
-#endif
-#ifdef CONFIG_ATM_HORIZON
- devs += hrz_detect();
-#endif
-#ifdef CONFIG_ATM_FORE200E
- devs += fore200e_detect();
-#endif
-#ifdef CONFIG_ATM_LANAI
- devs += lanai_detect();
-#endif
- return devs;
-}
{
struct atm_dev *atmtcp_dev;
struct atmtcp_dev_data *dev_data;
- struct sock *s;
- struct hlist_node *node;
- struct atm_vcc *walk;
- int i;
atmtcp_dev = (struct atm_dev *) vcc->dev_data;
dev_data = PRIV(atmtcp_dev);
if (dev_data->persist) return;
atmtcp_dev->dev_data = NULL;
kfree(dev_data);
- shutdown_atm_dev(atmtcp_dev);
+ atm_dev_deregister(atmtcp_dev);
vcc->dev_data = NULL;
- read_lock(&vcc_sklist_lock);
- for(i = 0; i < VCC_HTABLE_SIZE; ++i) {
- struct hlist_head *head = &vcc_hash[i];
-
- sk_for_each(s, node, head) {
- walk = atm_sk(s);
- if (walk->dev != atmtcp_dev)
- continue;
- wake_up(s->sk_sleep);
- }
- }
- read_unlock(&vcc_sklist_lock);
module_put(THIS_MODULE);
}
if (PRIV(dev)->vcc) return 0;
kfree(dev_data);
atm_dev_put(dev);
- shutdown_atm_dev(dev);
+ atm_dev_deregister(dev);
return 0;
}
* o lanai_change_qos() isn't written yet
*
* o There aren't any ioctl's yet -- I'd like to eventually support
- * setting loopback and LED modes that way. (see lanai_ioctl)
+ * setting loopback and LED modes that way.
*
* o If the segmentation engine or DMA gets shut down we should restart
* card as per section 17.0i. (see lanai_reset)
* vci with their bit set
*/
static void vci_bitfield_iterate(struct lanai_dev *lanai,
- /*const*/ unsigned long *lp,
+ const unsigned long *lp,
void (*func)(struct lanai_dev *,vci_t vci))
{
vci_t vci = find_first_bit(lp, NUM_VCI);
/* read a big-endian 4-byte value out of eeprom */
static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
{
- return be32_to_cpup((u32 *) (&lanai->eeprom[address]));
+ return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
}
/* Checksum/validate EEPROM contents */
}
/* test if VCC is currently backlogged */
-static inline int vcc_is_backlogged(/*const*/ struct lanai_vcc *lvcc)
+static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
{
return !skb_queue_empty(&lvcc->tx.backlog);
}
{
int size;
struct sk_buff *skb;
- /*const*/ u32 *x, *end = &lvcc->rx.buf.start[endptr * 4];
+ const u32 *x;
+ u32 *end = &lvcc->rx.buf.start[endptr * 4];
int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
if (n < 0)
n += lanai_buf_size(&lvcc->rx.buf);
* shifted by that much as we compute
*
*/
-static int pcr_to_cbricg(/*const*/ struct atm_qos *qos)
+static int pcr_to_cbricg(const struct atm_qos *qos)
{
int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */
int x, icg, pcr = atm_pcr_goal(&qos->txtp);
return result;
}
-#if 0
-/* ioctl operations for card */
-/* NOTE: these are all DEBUGGING ONLY currently */
-static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
-{
- int result = 0;
- struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
- switch(cmd) {
- case 2106275:
- shutdown_atm_dev(atmdev);
- return 0;
- case 2200000: {
- unsigned long flags;
- spin_lock_irqsave(&lanai->servicelock, flags);
- run_service(lanai);
- spin_unlock_irqrestore(&lanai->servicelock, flags);
- return 0; }
- case 2200002:
- get_statistics(lanai);
- return 0;
- case 2200003: {
- unsigned int i;
- for (i = 0; i <= 0x5C ; i += 4) {
- if (i==0x48) /* Write-only butt reg */
- continue;
- printk(KERN_CRIT DEV_LABEL " 0x%02X: "
- "0x%08X\n", i,
- (unsigned int) readl(lanai->base + i));
- barrier(); mb();
- pcistatus_check(lanai, 0);
- barrier(); mb();
- }
- return 0; }
- case 2200004: {
- u8 b;
- u16 w;
- u32 dw;
- struct pci_dev *pci = lanai->pci;
- (void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
- DPRINTK("vendor = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
- DPRINTK("device = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_COMMAND, &w);
- DPRINTK("command = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_STATUS, &w);
- DPRINTK("status = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_dword(pci,
- PCI_CLASS_REVISION, &dw);
- DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
- (void) pci_read_config_byte(pci,
- PCI_CACHE_LINE_SIZE, &b);
- DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
- DPRINTK("latency = %d (0x%X)\n",
- (int) b, (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
- DPRINTK("header type = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_BIST, &b);
- DPRINTK("bist = 0x%X\n", (unsigned int) b);
- /* skipping a few here */
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_LINE, &b);
- DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_PIN, &b);
- DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
- DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
- DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
- return 0;
-#ifdef USE_POWERDOWN
- case 2200005:
- DPRINTK("Coming out of powerdown\n");
- lanai->conf1 &= ~CONFIG1_POWERDOWN;
- conf1_write(lanai);
- return 0;
-#endif
- default:
- result = -ENOIOCTLCMD;
- }
- return result;
-}
-#else /* !0 */
-#define lanai_ioctl NULL
-#endif /* 0 */
-
static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
.dev_close = lanai_dev_close,
.open = lanai_open,
.close = lanai_close,
- .ioctl = lanai_ioctl,
.getsockopt = NULL,
.setsockopt = NULL,
.send = lanai_send,
* gone, so there isn't much to do
*/
DPRINTK("cleanup_module()\n");
+ pci_unregister_driver(&lanai_driver);
}
module_init(lanai_module_init);
if (ctx.handle != DRM_KERNEL_CONTEXT) {
if (dev->driver->context_ctor)
- dev->driver->context_ctor(dev, ctx.handle);
+ if (!dev->driver->context_ctor(dev, ctx.handle)) {
+ DRM_DEBUG( "Running out of ctxs or memory.\n");
+ return -ENOMEM;
+ }
}
ctx_entry = drm_alloc(sizeof(*ctx_entry), DRM_MEM_CTXLIST);
if (vma->vm_start > addr || (vma->vm_flags & VM_WRITE) == 0)
goto out_up;
- if (vma->vm_flags & (VM_SHARED | VM_HUGETLB | VM_UNPAGED))
+ if (vma->vm_flags & (VM_SHARED | VM_HUGETLB))
break;
count = vma->vm_end - addr;
if (count > size)
{
int retval = -EINVAL;
- /*
- * If we are already in context of hotplug thread, we dont need to
- * acquire the hotplug lock. Otherwise acquire cpucontrol to prevent
- * hotplug from removing this cpu that we are working on.
- */
- if (!current_in_cpu_hotplug())
- lock_cpu_hotplug();
-
+ lock_cpu_hotplug();
dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
target_freq, relation);
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
- if (!current_in_cpu_hotplug())
- unlock_cpu_hotplug();
+ unlock_cpu_hotplug();
return retval;
}
0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */
};
+#define W83792D_REG_GPIO_EN 0x1A
#define W83792D_REG_CONFIG 0x40
#define W83792D_REG_VID_FANDIV 0x47
#define W83792D_REG_CHIPID 0x49
{
int i;
val = SENSORS_LIMIT(val, 1, 128) >> 1;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 7; i++) {
if (val == 0)
break;
val >>= 1;
w83792d_init_client(new_client);
/* A few vars need to be filled upon startup */
- for (i = 1; i <= 7; i++) {
- data->fan_min[i - 1] = w83792d_read_value(new_client,
+ for (i = 0; i < 7; i++) {
+ data->fan_min[i] = w83792d_read_value(new_client,
W83792D_REG_FAN_MIN[i]);
}
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
device_create_file_fan(new_client, 3);
- device_create_file_fan(new_client, 4);
- device_create_file_fan(new_client, 5);
- device_create_file_fan(new_client, 6);
- device_create_file_fan(new_client, 7);
+
+ /* Read GPIO enable register to check if pins for fan 4,5 are used as
+ GPIO */
+ val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
+ if (!(val1 & 0x40))
+ device_create_file_fan(new_client, 4);
+ if (!(val1 & 0x20))
+ device_create_file_fan(new_client, 5);
+
+ val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
+ if (val1 & 0x40)
+ device_create_file_fan(new_client, 6);
+ if (val1 & 0x04)
+ device_create_file_fan(new_client, 7);
device_create_file_temp1(new_client); /* Temp1 */
device_create_file_temp_add(new_client, 2); /* Temp2 */
u8 method;
__be64 *tid;
int ret, length, hdr_len, copy_offset;
- int rmpp_active = 0;
+ int rmpp_active, has_rmpp_header;
if (count < sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)
return -EINVAL;
}
rmpp_mad = (struct ib_rmpp_mad *) packet->mad.data;
- if (ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE) {
- /* RMPP active */
- if (!agent->rmpp_version) {
- ret = -EINVAL;
- goto err_ah;
- }
-
- /* Validate that the management class can support RMPP */
- if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) {
- hdr_len = IB_MGMT_SA_HDR;
- } else if ((rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
- (rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) {
- hdr_len = IB_MGMT_VENDOR_HDR;
- } else {
- ret = -EINVAL;
- goto err_ah;
- }
- rmpp_active = 1;
+ if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) {
+ hdr_len = IB_MGMT_SA_HDR;
copy_offset = IB_MGMT_RMPP_HDR;
+ has_rmpp_header = 1;
+ } else if (rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START &&
+ rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END) {
+ hdr_len = IB_MGMT_VENDOR_HDR;
+ copy_offset = IB_MGMT_RMPP_HDR;
+ has_rmpp_header = 1;
} else {
hdr_len = IB_MGMT_MAD_HDR;
copy_offset = IB_MGMT_MAD_HDR;
+ has_rmpp_header = 0;
+ }
+
+ if (has_rmpp_header)
+ rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
+ IB_MGMT_RMPP_FLAG_ACTIVE;
+ else
+ rmpp_active = 0;
+
+ /* Validate that the management class can support RMPP */
+ if (rmpp_active && !agent->rmpp_version) {
+ ret = -EINVAL;
+ goto err_ah;
}
packet->msg = ib_create_send_mad(agent,
u32 *counter;
};
+struct ib_uverbs_mcast_entry {
+ struct list_head list;
+ union ib_gid gid;
+ u16 lid;
+};
+
struct ib_uevent_object {
struct ib_uobject uobject;
struct list_head event_list;
u32 events_reported;
};
+struct ib_uqp_object {
+ struct ib_uevent_object uevent;
+ struct list_head mcast_list;
+};
+
struct ib_ucq_object {
struct ib_uobject uobject;
struct ib_uverbs_file *uverbs_file;
struct ib_uverbs_create_qp cmd;
struct ib_uverbs_create_qp_resp resp;
struct ib_udata udata;
- struct ib_uevent_object *uobj;
+ struct ib_uqp_object *uobj;
struct ib_pd *pd;
struct ib_cq *scq, *rcq;
struct ib_srq *srq;
attr.cap.max_recv_sge = cmd.max_recv_sge;
attr.cap.max_inline_data = cmd.max_inline_data;
- uobj->uobject.user_handle = cmd.user_handle;
- uobj->uobject.context = file->ucontext;
- uobj->events_reported = 0;
- INIT_LIST_HEAD(&uobj->event_list);
+ uobj->uevent.uobject.user_handle = cmd.user_handle;
+ uobj->uevent.uobject.context = file->ucontext;
+ uobj->uevent.events_reported = 0;
+ INIT_LIST_HEAD(&uobj->uevent.event_list);
+ INIT_LIST_HEAD(&uobj->mcast_list);
qp = pd->device->create_qp(pd, &attr, &udata);
if (IS_ERR(qp)) {
qp->send_cq = attr.send_cq;
qp->recv_cq = attr.recv_cq;
qp->srq = attr.srq;
- qp->uobject = &uobj->uobject;
+ qp->uobject = &uobj->uevent.uobject;
qp->event_handler = attr.event_handler;
qp->qp_context = attr.qp_context;
qp->qp_type = attr.qp_type;
goto err_destroy;
}
- ret = idr_get_new(&ib_uverbs_qp_idr, qp, &uobj->uobject.id);
+ ret = idr_get_new(&ib_uverbs_qp_idr, qp, &uobj->uevent.uobject.id);
if (ret == -EAGAIN)
goto retry;
if (ret)
goto err_destroy;
- resp.qp_handle = uobj->uobject.id;
+ resp.qp_handle = uobj->uevent.uobject.id;
resp.max_recv_sge = attr.cap.max_recv_sge;
resp.max_send_sge = attr.cap.max_send_sge;
resp.max_recv_wr = attr.cap.max_recv_wr;
}
down(&file->mutex);
- list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list);
+ list_add_tail(&uobj->uevent.uobject.list, &file->ucontext->qp_list);
up(&file->mutex);
up(&ib_uverbs_idr_mutex);
return in_len;
err_idr:
- idr_remove(&ib_uverbs_qp_idr, uobj->uobject.id);
+ idr_remove(&ib_uverbs_qp_idr, uobj->uevent.uobject.id);
err_destroy:
ib_destroy_qp(qp);
struct ib_uverbs_destroy_qp cmd;
struct ib_uverbs_destroy_qp_resp resp;
struct ib_qp *qp;
- struct ib_uevent_object *uobj;
+ struct ib_uqp_object *uobj;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
if (!qp || qp->uobject->context != file->ucontext)
goto out;
- uobj = container_of(qp->uobject, struct ib_uevent_object, uobject);
+ uobj = container_of(qp->uobject, struct ib_uqp_object, uevent.uobject);
+
+ if (!list_empty(&uobj->mcast_list)) {
+ ret = -EBUSY;
+ goto out;
+ }
ret = ib_destroy_qp(qp);
if (ret)
idr_remove(&ib_uverbs_qp_idr, cmd.qp_handle);
down(&file->mutex);
- list_del(&uobj->uobject.list);
+ list_del(&uobj->uevent.uobject.list);
up(&file->mutex);
- ib_uverbs_release_uevent(file, uobj);
+ ib_uverbs_release_uevent(file, &uobj->uevent);
- resp.events_reported = uobj->events_reported;
+ resp.events_reported = uobj->uevent.events_reported;
kfree(uobj);
{
struct ib_uverbs_attach_mcast cmd;
struct ib_qp *qp;
+ struct ib_uqp_object *uobj;
+ struct ib_uverbs_mcast_entry *mcast;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
down(&ib_uverbs_idr_mutex);
qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle);
- if (qp && qp->uobject->context == file->ucontext)
- ret = ib_attach_mcast(qp, (union ib_gid *) cmd.gid, cmd.mlid);
+ if (!qp || qp->uobject->context != file->ucontext)
+ goto out;
+
+ uobj = container_of(qp->uobject, struct ib_uqp_object, uevent.uobject);
+
+ list_for_each_entry(mcast, &uobj->mcast_list, list)
+ if (cmd.mlid == mcast->lid &&
+ !memcmp(cmd.gid, mcast->gid.raw, sizeof mcast->gid.raw)) {
+ ret = 0;
+ goto out;
+ }
+ mcast = kmalloc(sizeof *mcast, GFP_KERNEL);
+ if (!mcast) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mcast->lid = cmd.mlid;
+ memcpy(mcast->gid.raw, cmd.gid, sizeof mcast->gid.raw);
+
+ ret = ib_attach_mcast(qp, &mcast->gid, cmd.mlid);
+ if (!ret) {
+ uobj = container_of(qp->uobject, struct ib_uqp_object,
+ uevent.uobject);
+ list_add_tail(&mcast->list, &uobj->mcast_list);
+ } else
+ kfree(mcast);
+
+out:
up(&ib_uverbs_idr_mutex);
return ret ? ret : in_len;
int out_len)
{
struct ib_uverbs_detach_mcast cmd;
+ struct ib_uqp_object *uobj;
struct ib_qp *qp;
+ struct ib_uverbs_mcast_entry *mcast;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
down(&ib_uverbs_idr_mutex);
qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle);
- if (qp && qp->uobject->context == file->ucontext)
- ret = ib_detach_mcast(qp, (union ib_gid *) cmd.gid, cmd.mlid);
+ if (!qp || qp->uobject->context != file->ucontext)
+ goto out;
+
+ ret = ib_detach_mcast(qp, (union ib_gid *) cmd.gid, cmd.mlid);
+ if (ret)
+ goto out;
+ uobj = container_of(qp->uobject, struct ib_uqp_object, uevent.uobject);
+
+ list_for_each_entry(mcast, &uobj->mcast_list, list)
+ if (cmd.mlid == mcast->lid &&
+ !memcmp(cmd.gid, mcast->gid.raw, sizeof mcast->gid.raw)) {
+ list_del(&mcast->list);
+ kfree(mcast);
+ break;
+ }
+
+out:
up(&ib_uverbs_idr_mutex);
return ret ? ret : in_len;
spin_unlock_irq(&file->async_file->lock);
}
+static void ib_uverbs_detach_umcast(struct ib_qp *qp,
+ struct ib_uqp_object *uobj)
+{
+ struct ib_uverbs_mcast_entry *mcast, *tmp;
+
+ list_for_each_entry_safe(mcast, tmp, &uobj->mcast_list, list) {
+ ib_detach_mcast(qp, &mcast->gid, mcast->lid);
+ list_del(&mcast->list);
+ kfree(mcast);
+ }
+}
+
static int ib_uverbs_cleanup_ucontext(struct ib_uverbs_file *file,
struct ib_ucontext *context)
{
list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) {
struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id);
- struct ib_uevent_object *uevent =
- container_of(uobj, struct ib_uevent_object, uobject);
+ struct ib_uqp_object *uqp =
+ container_of(uobj, struct ib_uqp_object, uevent.uobject);
idr_remove(&ib_uverbs_qp_idr, uobj->id);
+ ib_uverbs_detach_umcast(qp, uqp);
ib_destroy_qp(qp);
list_del(&uobj->list);
- ib_uverbs_release_uevent(file, uevent);
- kfree(uevent);
+ ib_uverbs_release_uevent(file, &uqp->uevent);
+ kfree(uqp);
}
list_for_each_entry_safe(uobj, tmp, &context->cq_list, list) {
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
mthca_wq_init(&qp->sq);
+ qp->sq.last = get_send_wqe(qp, qp->sq.max - 1);
+
mthca_wq_init(&qp->rq);
+ qp->rq.last = get_recv_wqe(qp, qp->rq.max - 1);
if (mthca_is_memfree(dev)) {
*qp->sq.db = 0;
{
struct mthca_dev *dev = to_mdev(ibqp->device);
struct mthca_qp *qp = to_mqp(ibqp);
+ __be32 doorbell[2];
void *wqe;
void *prev_wqe;
unsigned long flags;
ind = qp->sq.head & (qp->sq.max - 1);
for (nreq = 0; wr; ++nreq, wr = wr->next) {
+ if (unlikely(nreq == MTHCA_ARBEL_MAX_WQES_PER_SEND_DB)) {
+ nreq = 0;
+
+ doorbell[0] = cpu_to_be32((MTHCA_ARBEL_MAX_WQES_PER_SEND_DB << 24) |
+ ((qp->sq.head & 0xffff) << 8) |
+ f0 | op0);
+ doorbell[1] = cpu_to_be32((qp->qpn << 8) | size0);
+
+ qp->sq.head += MTHCA_ARBEL_MAX_WQES_PER_SEND_DB;
+ size0 = 0;
+
+ /*
+ * Make sure that descriptors are written before
+ * doorbell record.
+ */
+ wmb();
+ *qp->sq.db = cpu_to_be32(qp->sq.head & 0xffff);
+
+ /*
+ * Make sure doorbell record is written before we
+ * write MMIO send doorbell.
+ */
+ wmb();
+ mthca_write64(doorbell,
+ dev->kar + MTHCA_SEND_DOORBELL,
+ MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+ }
+
if (mthca_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) {
mthca_err(dev, "SQ %06x full (%u head, %u tail,"
" %d max, %d nreq)\n", qp->qpn,
out:
if (likely(nreq)) {
- __be32 doorbell[2];
-
doorbell[0] = cpu_to_be32((nreq << 24) |
((qp->sq.head & 0xffff) << 8) |
f0 | op0);
enum {
MTHCA_INVAL_LKEY = 0x100,
- MTHCA_TAVOR_MAX_WQES_PER_RECV_DB = 256
+ MTHCA_TAVOR_MAX_WQES_PER_RECV_DB = 256,
+ MTHCA_ARBEL_MAX_WQES_PER_SEND_DB = 255
};
struct mthca_next_seg {
if (test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
ipoib_ib_dev_up(dev);
+ down(&priv->vlan_mutex);
+
/* Flush any child interfaces too */
list_for_each_entry(cpriv, &priv->child_intfs, list)
ipoib_ib_dev_flush(&cpriv->dev);
+
+ up(&priv->vlan_mutex);
}
void ipoib_ib_dev_cleanup(struct net_device *dev)
if (ipoib_ib_dev_open(dev))
return -EINVAL;
- if (ipoib_ib_dev_up(dev))
+ if (ipoib_ib_dev_up(dev)) {
+ ipoib_ib_dev_stop(dev);
return -EINVAL;
+ }
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
struct ipoib_dev_priv *cpriv;
while ((skb = __skb_dequeue(&neigh->queue)))
__skb_queue_tail(&skqueue, skb);
}
- } else
- path->query = NULL;
+ }
+ path->query = NULL;
complete(&path->done);
spin_unlock_irqrestore(&priv->lock, flags);
skb_queue_head_init(&path->queue);
INIT_LIST_HEAD(&path->neigh_list);
- init_completion(&path->done);
memcpy(path->pathrec.dgid.raw, gid->raw, sizeof (union ib_gid));
path->pathrec.sgid = priv->local_gid;
ipoib_dbg(priv, "Start path record lookup for " IPOIB_GID_FMT "\n",
IPOIB_GID_ARG(path->pathrec.dgid));
+ init_completion(&path->done);
+
path->query_id =
ib_sa_path_rec_get(priv->ca, priv->port,
&path->pathrec,
if (!mcast)
return NULL;
- init_completion(&mcast->done);
-
mcast->dev = dev;
mcast->created = jiffies;
mcast->backoff = 1;
- mcast->logcount = 0;
INIT_LIST_HEAD(&mcast->list);
INIT_LIST_HEAD(&mcast->neigh_list);
skb_queue_head_init(&mcast->pkt_queue);
- mcast->ah = NULL;
- mcast->query = NULL;
-
return mcast;
}
rec.port_gid = priv->local_gid;
rec.pkey = cpu_to_be16(priv->pkey);
+ init_completion(&mcast->done);
+
ret = ib_sa_mcmember_rec_set(priv->ca, priv->port, &rec,
IB_SA_MCMEMBER_REC_MGID |
IB_SA_MCMEMBER_REC_PORT_GID |
rec.traffic_class = priv->broadcast->mcmember.traffic_class;
}
+ init_completion(&mcast->done);
+
ret = ib_sa_mcmember_rec_set(priv->ca, priv->port, &rec, comp_mask,
mcast->backoff * 1000, GFP_ATOMIC,
ipoib_mcast_join_complete,
mddev->size = le64_to_cpu(sb->size)/2;
mddev->events = le64_to_cpu(sb->events);
mddev->bitmap_offset = 0;
- mddev->default_bitmap_offset = 0;
mddev->default_bitmap_offset = 1024;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
mddev->sb_dirty = 1;
+ mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
+ mddev->bitmap_offset = 0;
+
/*
* Generate a 128 bit UUID
*/
int mirror = 0;
mirror_info_t *p;
- if (rdev->saved_raid_disk >= 0 &&
- conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
- mirror = rdev->saved_raid_disk;
for (mirror=0; mirror < mddev->raid_disks; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
p->head_position = 0;
rdev->raid_disk = mirror;
found = 1;
- if (rdev->saved_raid_disk != mirror)
+ /* As all devices are equivalent, we don't need a full recovery
+ * if this was recently any drive of the array
+ */
+ if (rdev->saved_raid_disk < 0)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;
!test_bit(In_sync, &rdev->flags))
continue;
- if (!atomic_read(&rdev->nr_pending)) {
+ /* This optimisation is debatable, and completely destroys
+ * sequential read speed for 'far copies' arrays. So only
+ * keep it for 'near' arrays, and review those later.
+ */
+ if (conf->near_copies > 1 && !atomic_read(&rdev->nr_pending)) {
disk = ndisk;
slot = nslot;
break;
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
int data_disks = raid_disks - 2;
sector_t max_sector = mddev->size << 1;
int sync_blocks;
+ int still_degraded = 0;
+ int i;
if (sector_nr >= max_sector) {
/* just being told to finish up .. nothing much to do */
if (mddev->curr_resync < max_sector) /* aborted */
bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
&sync_blocks, 1);
- else /* compelted sync */
+ else /* completed sync */
conf->fullsync = 0;
bitmap_close_sync(mddev->bitmap);
*/
schedule_timeout_uninterruptible(1);
}
- bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0);
+ /* Need to check if array will still be degraded after recovery/resync
+ * We don't need to check the 'failed' flag as when that gets set,
+ * recovery aborts.
+ */
+ for (i=0; i<mddev->raid_disks; i++)
+ if (conf->disks[i].rdev == NULL)
+ still_degraded = 1;
+
+ bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
+
spin_lock(&sh->lock);
set_bit(STRIPE_SYNCING, &sh->state);
clear_bit(STRIPE_INSYNC, &sh->state);
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
/* no point adding a device */
return 0;
/*
- * find the disk ...
+ * find the disk ... but prefer rdev->saved_raid_disk
+ * if possible.
*/
- for (disk=0; disk < mddev->raid_disks; disk++)
+ if (rdev->saved_raid_disk >= 0 &&
+ conf->disks[rdev->saved_raid_disk].rdev == NULL)
+ disk = rdev->saved_raid_disk;
+ else
+ disk = 0;
+ for ( ; disk < mddev->raid_disks; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
}
-void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
+static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
}
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
-#include <linux/rwsem.h>
+#include <linux/spinlock.h>
#include <linux/sched.h>
#include "dvb_ca_en50221.h"
/* size of the buffer to use when talking to the CAM */
int link_buf_size;
- /* semaphore for syncing access to slot structure */
- struct rw_semaphore sem;
-
/* buffer for incoming packets */
struct dvb_ringbuffer rx_buffer;
if (ebuf == NULL) {
int buf_free;
- down_read(&ca->slot_info[slot].sem);
if (ca->slot_info[slot].rx_buffer.data == NULL) {
- up_read(&ca->slot_info[slot].sem);
status = -EIO;
goto exit;
}
buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
- up_read(&ca->slot_info[slot].sem);
if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
status = -EAGAIN;
/* OK, add it to the receive buffer, or copy into external buffer if supplied */
if (ebuf == NULL) {
- down_read(&ca->slot_info[slot].sem);
if (ca->slot_info[slot].rx_buffer.data == NULL) {
- up_read(&ca->slot_info[slot].sem);
status = -EIO;
goto exit;
}
dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read);
- up_read(&ca->slot_info[slot].sem);
} else {
memcpy(ebuf, buf, bytes_read);
}
{
dprintk("%s\n", __FUNCTION__);
- down_write(&ca->slot_info[slot].sem);
ca->pub->slot_shutdown(ca->pub, slot);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
- vfree(ca->slot_info[slot].rx_buffer.data);
- ca->slot_info[slot].rx_buffer.data = NULL;
- up_write(&ca->slot_info[slot].sem);
/* need to wake up all processes to check if they're now
trying to write to a defunct CAM */
case DVB_CA_SLOTSTATE_RUNNING:
if (ca->open)
- dvb_ca_en50221_read_data(ca, slot, NULL, 0);
+ dvb_ca_en50221_thread_wakeup(ca);
break;
}
}
break;
}
- rxbuf = vmalloc(RX_BUFFER_SIZE);
- if (rxbuf == NULL) {
- printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num);
- ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
- dvb_ca_en50221_thread_update_delay(ca);
- break;
+ if (ca->slot_info[slot].rx_buffer.data == NULL) {
+ rxbuf = vmalloc(RX_BUFFER_SIZE);
+ if (rxbuf == NULL) {
+ printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num);
+ ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
+ dvb_ca_en50221_thread_update_delay(ca);
+ break;
+ }
+ dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE);
}
- down_write(&ca->slot_info[slot].sem);
- dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE);
- up_write(&ca->slot_info[slot].sem);
ca->pub->slot_ts_enable(ca->pub, slot);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING;
if (!ca->open)
continue;
- // no need to poll if the CAM supports IRQs
- if (ca->slot_info[slot].da_irq_supported)
- break;
-
- // poll mode
+ // poll slots for data
pktcount = 0;
while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) {
if (!ca->open)
/**
* Condition for waking up in dvb_ca_en50221_io_read_condition
*/
-static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, int *result, int *_slot)
+static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
+ int *result, int *_slot)
{
int slot;
int slot_count = 0;
int idx;
- int fraglen;
+ size_t fraglen;
int connection_id = -1;
int found = 0;
u8 hdr[2];
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
goto nextslot;
- down_read(&ca->slot_info[slot].sem);
-
if (ca->slot_info[slot].rx_buffer.data == NULL) {
- up_read(&ca->slot_info[slot].sem);
return 0;
}
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
}
- if (!found)
- up_read(&ca->slot_info[slot].sem);
-
- nextslot:
+nextslot:
slot = (slot + 1) % ca->slot_count;
slot_count++;
}
goto exit;
status = pktlen;
- exit:
- up_read(&ca->slot_info[slot].sem);
+exit:
return status;
}
for (i = 0; i < ca->slot_count; i++) {
if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
- down_write(&ca->slot_info[i].sem);
if (ca->slot_info[i].rx_buffer.data != NULL) {
+ /* it is safe to call this here without locks because
+ * ca->open == 0. Data is not read in this case */
dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer);
}
- up_write(&ca->slot_info[i].sem);
}
}
dprintk("%s\n", __FUNCTION__);
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
- up_read(&ca->slot_info[slot].sem);
mask |= POLLIN;
}
poll_wait(file, &ca->wait_queue, wait);
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
- up_read(&ca->slot_info[slot].sem);
mask |= POLLIN;
}
ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
atomic_set(&ca->slot_info[i].camchange_count, 0);
ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
- init_rwsem(&ca->slot_info[i].sem);
}
if (signal_pending(current)) {
ca->thread_pid = ret;
return 0;
- error:
+error:
if (ca != NULL) {
if (ca->dvbdev != NULL)
dvb_unregister_device(ca->dvbdev);
for (i = 0; i < ca->slot_count; i++) {
dvb_ca_en50221_slot_shutdown(ca, i);
+ if (ca->slot_info[i].rx_buffer.data != NULL) {
+ vfree(ca->slot_info[i].rx_buffer.data);
+ }
}
kfree(ca->slot_info);
dvb_unregister_device(ca->dvbdev);
unsigned char ule_bridged; /* Whether the ULE_BRIDGED extension header was found. */
int ule_sndu_remain; /* Nr. of bytes still required for current ULE SNDU. */
unsigned long ts_count; /* Current ts cell counter. */
+
+ struct semaphore mutex;
};
static int dvb_net_feed_start(struct net_device *dev)
{
- int ret, i;
+ int ret = 0, i;
struct dvb_net_priv *priv = dev->priv;
struct dmx_demux *demux = priv->demux;
unsigned char *mac = (unsigned char *) dev->dev_addr;
dprintk("%s: rx_mode %i\n", __FUNCTION__, priv->rx_mode);
+ down(&priv->mutex);
if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0])
printk("%s: BUG %d\n", __FUNCTION__, __LINE__);
dvb_net_sec_callback);
if (ret<0) {
printk("%s: could not allocate section feed\n", dev->name);
- return ret;
+ goto error;
}
ret = priv->secfeed->set(priv->secfeed, priv->pid, 32768, 1);
printk("%s: could not set section feed\n", dev->name);
priv->demux->release_section_feed(priv->demux, priv->secfeed);
priv->secfeed=NULL;
- return ret;
+ goto error;
}
if (priv->rx_mode != RX_MODE_PROMISC) {
ret = demux->allocate_ts_feed(demux, &priv->tsfeed, dvb_net_ts_callback);
if (ret < 0) {
printk("%s: could not allocate ts feed\n", dev->name);
- return ret;
+ goto error;
}
/* Set netdevice pointer for ts decaps callback. */
printk("%s: could not set ts feed\n", dev->name);
priv->demux->release_ts_feed(priv->demux, priv->tsfeed);
priv->tsfeed = NULL;
- return ret;
+ goto error;
}
dprintk("%s: start filtering\n", __FUNCTION__);
priv->tsfeed->start_filtering(priv->tsfeed);
} else
- return -EINVAL;
+ ret = -EINVAL;
- return 0;
+error:
+ up(&priv->mutex);
+ return ret;
}
static int dvb_net_feed_stop(struct net_device *dev)
{
struct dvb_net_priv *priv = dev->priv;
- int i;
+ int i, ret = 0;
dprintk("%s\n", __FUNCTION__);
+ down(&priv->mutex);
if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) {
if (priv->secfeed) {
if (priv->secfeed->is_filtering) {
else
printk("%s: no ts feed to stop\n", dev->name);
} else
- return -EINVAL;
- return 0;
+ ret = -EINVAL;
+ up(&priv->mutex);
+ return ret;
}
struct dvb_net_priv *priv = dev->priv;
dvb_net_feed_stop(dev);
-
priv->rx_mode = RX_MODE_UNI;
+ spin_lock_bh(&dev->xmit_lock);
if (dev->flags & IFF_PROMISC) {
dprintk("%s: promiscuous mode\n", dev->name);
}
}
+ spin_unlock_bh(&dev->xmit_lock);
dvb_net_feed_start(dev);
}
INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list, net);
INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed, net);
+ init_MUTEX(&priv->mutex);
net->base_addr = pid;
};
-int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 key[5];
if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0),
int dibusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
{
if (d->priv != NULL) {
- struct dib_fe_xfer_ops *ops = d->priv;
- if (ops->fifo_ctrl != NULL)
- if (ops->fifo_ctrl(d->fe,onoff)) {
+ struct dibusb_state *st = d->priv;
+ if (st->ops.fifo_ctrl != NULL)
+ if (st->ops.fifo_ctrl(d->fe,onoff)) {
err("error while controlling the fifo of the demod.");
return -ENODEV;
}
int dibusb_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff)
{
if (d->priv != NULL) {
- struct dib_fe_xfer_ops *ops = d->priv;
- if (d->pid_filtering && ops->pid_ctrl != NULL)
- ops->pid_ctrl(d->fe,index,pid,onoff);
+ struct dibusb_state *st = d->priv;
+ if (st->ops.pid_ctrl != NULL)
+ st->ops.pid_ctrl(d->fe,index,pid,onoff);
}
return 0;
}
int dibusb_pid_filter_ctrl(struct dvb_usb_device *d, int onoff)
{
if (d->priv != NULL) {
- struct dib_fe_xfer_ops *ops = d->priv;
- if (ops->pid_parse != NULL)
- if (ops->pid_parse(d->fe,onoff) < 0)
+ struct dibusb_state *st = d->priv;
+ if (st->ops.pid_parse != NULL)
+ if (st->ops.pid_parse(d->fe,onoff) < 0)
err("could not handle pid_parser");
}
return 0;
};
/* TODO is it really the NEC protocol ? */
-int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 key[5];
MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0).");
/* general initialization functions */
-int dvb_usb_exit(struct dvb_usb_device *d)
+static int dvb_usb_exit(struct dvb_usb_device *d)
{
deb_info("state before exiting everything: %x\n",d->state);
dvb_usb_remote_exit(d);
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <steve@toth.demon.co.uk>
+ Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <steve@toth.demon.co.uk>
+ Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/string.h>
#include "dvb_frontend.h"
#include "dvb-pll.h"
/* yeuch! */
fpxin = state->config->xin * 10;
fptmp = fpxin; do_div(fptmp, 123);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 1;
fptmp = fpxin; do_div(fptmp, 160);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 0;
fptmp = fpxin; do_div(fptmp, 246);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 1;
fptmp = fpxin; do_div(fptmp, 320);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 0;
fptmp = fpxin; do_div(fptmp, 492);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 1;
fptmp = fpxin; do_div(fptmp, 640);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 0;
fptmp = fpxin; do_div(fptmp, 984);
- if (symbolrate < fptmp);
+ if (symbolrate < fptmp)
SFIL = 1;
fin = state->config->xin >> 4;
tristate "Budget cards with onboard CI connector"
depends on DVB_CORE && PCI
select VIDEO_SAA7146
+ select DVB_STV0297
select DVB_STV0299
select DVB_TDA1004X
help
#include "av7110.h"
#include "av7110_hw.h"
+#include "av7110_ca.h"
void CI_handle(struct av7110 *av7110, u8 *data, u16 len)
static struct saa7146_extension budget_extension = {
.name = "budget_av",
+ .flags = SAA7146_I2C_SHORT_DELAY,
+
.pci_tbl = pci_tbl,
.module = THIS_MODULE,
static struct saa7146_extension budget_extension = {
.name = "budget_ci dvb\0",
- .flags = 0,
+ .flags = SAA7146_I2C_SHORT_DELAY,
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
static struct saa7146_extension budget_extension = {
.name = "budget dvb\0",
- .flags = 0,
+ .flags = SAA7146_I2C_SHORT_DELAY,
.module = THIS_MODULE,
.pci_tbl = pci_tbl,
#include <linux/string.h>
#include <linux/i2c.h>
+#include "ttpci-eeprom.h"
#if 1
#define dprintk(x...) do { printk(x); } while (0)
module will be called bttv.
config VIDEO_BT848_DVB
- tristate "DVB/ATSC Support for bt878 based TV cards"
+ bool "DVB/ATSC Support for bt878 based TV cards"
depends on VIDEO_BT848 && DVB_CORE
select DVB_BT8XX
---help---
This adds support for DVB/ATSC cards based on the BT878 chip.
- To compile this driver as a module, choose M here: the
- module will be called dvb-bt8xx.
-
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
depends on VIDEO_DEV && I2C && VIDEO_BT848
*/
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
-void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
+static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
{
int type = -1;
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
-void
+static void
init_RTV24 (struct bttv *btv)
{
uint32_t dataRead = 0;
/* ----------------------------------------------------------------------- */
/* winview */
-void winview_audio(struct bttv *btv, struct video_audio *v, int set)
+static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
{
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
int bits_out, loops, vol, data;
memset(i,0,sizeof(*i));
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
- i->audioset = 1;
+ i->audioset = 0;
if (i->index == bttv_tvcards[btv->c.type].tuner) {
sprintf(i->name, "Television");
i->type = V4L2_INPUT_TYPE_TUNER;
memset(t,0,sizeof(*t));
strcpy(t->name, "Television");
t->type = V4L2_TUNER_ANALOG_TV;
- t->rangehigh = 0xffffffffUL;
t->capability = V4L2_TUNER_CAP_NORM;
t->rxsubchans = V4L2_TUNER_SUB_MONO;
if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC)
t->signal = 0xffff;
{
+ struct video_tuner tuner;
+
+ memset(&tuner, 0, sizeof (tuner));
+ tuner.rangehigh = 0xffffffffUL;
+ bttv_call_i2c_clients(btv, VIDIOCGTUNER, &tuner);
+ t->rangelow = tuner.rangelow;
+ t->rangehigh = tuner.rangehigh;
+ }
+ {
/* Hmmm ... */
struct video_audio va;
memset(&va, 0, sizeof(struct video_audio));
}
case VIDIOC_LOG_STATUS:
{
- bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, 0);
+ bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, NULL);
return 0;
}
return 0;
}
+static void
+pix_format_set_size (struct v4l2_pix_format * f,
+ const struct bttv_format * fmt,
+ unsigned int width,
+ unsigned int height)
+{
+ f->width = width;
+ f->height = height;
+
+ if (fmt->flags & FORMAT_FLAGS_PLANAR) {
+ f->bytesperline = width; /* Y plane */
+ f->sizeimage = (width * height * fmt->depth) >> 3;
+ } else {
+ f->bytesperline = (width * fmt->depth) >> 3;
+ f->sizeimage = height * f->bytesperline;
+ }
+}
+
static int bttv_g_fmt(struct bttv_fh *fh, struct v4l2_format *f)
{
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
memset(&f->fmt.pix,0,sizeof(struct v4l2_pix_format));
- f->fmt.pix.width = fh->width;
- f->fmt.pix.height = fh->height;
+ pix_format_set_size (&f->fmt.pix, fh->fmt,
+ fh->width, fh->height);
f->fmt.pix.field = fh->cap.field;
f->fmt.pix.pixelformat = fh->fmt->fourcc;
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fh->fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
return 0;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
memset(&f->fmt.win,0,sizeof(struct v4l2_window));
f->fmt.pix.width = maxw;
if (f->fmt.pix.height > maxh)
f->fmt.pix.height = maxh;
- f->fmt.pix.width &= ~0x03;
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
+ pix_format_set_size (&f->fmt.pix, fmt,
+ f->fmt.pix.width & ~3,
+ f->fmt.pix.height);
return 0;
}
retval = -EINVAL;
goto fh_unlock_and_return;
}
+ if (fmt->flags & FORMAT_FLAGS_RAW) {
+ /* VIDIOCMCAPTURE uses gbufsize, not RAW_BPL *
+ RAW_LINES * 2. F1 is stored at offset 0, F2
+ at buffer size / 2. */
+ fh->width = RAW_BPL;
+ fh->height = gbufsize / RAW_BPL;
+ btv->init.width = RAW_BPL;
+ btv->init.height = gbufsize / RAW_BPL;
+ }
fh->ovfmt = fmt;
fh->fmt = fmt;
btv->init.ovfmt = fmt;
if (0 == v4l2)
return -EINVAL;
- strcpy(cap->driver,"bttv");
- strlcpy(cap->card,btv->video_dev->name,sizeof(cap->card));
- sprintf(cap->bus_info,"PCI:%s",pci_name(btv->c.pci));
+ memset(cap, 0, sizeof (*cap));
+ strlcpy(cap->driver, "bttv", sizeof (cap->driver));
+ strlcpy(cap->card, btv->video_dev->name, sizeof (cap->card));
+ snprintf(cap->bus_info, sizeof (cap->bus_info),
+ "PCI:%s", pci_name(btv->c.pci));
cap->version = BTTV_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR;
field = videobuf_next_field(&fh->cap);
if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) {
+ kfree (fh->cap.read_buf);
+ fh->cap.read_buf = NULL;
up(&fh->cap.lock);
return POLLERR;
}
static void input_change(struct i2c_client *client)
{
+ struct cx25840_state *state = i2c_get_clientdata(client);
v4l2_std_id std = cx25840_get_v4lstd(client);
+ /* Note: perhaps V4L2_STD_PAL_M should be handled as V4L2_STD_NTSC
+ instead of V4L2_STD_PAL. Someone needs to test this. */
if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_NTSC) {
/* NTSC */
- cx25840_write(client, 0x808, 0xf6);
+ if (state->cardtype == CARDTYPE_PVR150_WORKAROUND) {
+ /* Certain Hauppauge PVR150 models have a hardware bug
+ that causes audio to drop out. For these models the
+ audio standard must be set explicitly.
+ To be precise: it affects cards with tuner models
+ 85, 99 and 112 (model numbers from tveeprom). */
+ if (std == V4L2_STD_NTSC_M_JP) {
+ /* Japan uses EIAJ audio standard */
+ cx25840_write(client, 0x808, 0x2f);
+ } else {
+ /* Others use the BTSC audio standard */
+ cx25840_write(client, 0x808, 0x1f);
+ }
+ /* South Korea uses the A2-M (aka Zweiton M) audio
+ standard, and should set 0x808 to 0x3f, but I don't
+ know how to detect this. */
+ } else if (std == V4L2_STD_NTSC_M_JP) {
+ /* Japan uses EIAJ audio standard */
+ cx25840_write(client, 0x808, 0xf7);
+ } else {
+ /* Others use the BTSC audio standard */
+ cx25840_write(client, 0x808, 0xf6);
+ }
+ /* South Korea uses the A2-M (aka Zweiton M) audio standard,
+ and should set 0x808 to 0xf8, but I don't know how to
+ detect this. */
cx25840_write(client, 0x80b, 0x00);
}
case CX25840_TUNER:
cx25840_dbg("now setting Tuner input\n");
- if (state->cardtype == CARDTYPE_PVR150) {
+ if (state->cardtype == CARDTYPE_PVR150 ||
+ state->cardtype == CARDTYPE_PVR150_WORKAROUND) {
/* CH_SEL_ADC2=1 */
cx25840_and_or(client, 0x102, ~0x2, 0x02);
}
case CX25840_CID_CARDTYPE:
switch (ctrl->value) {
case CARDTYPE_PVR150:
+ case CARDTYPE_PVR150_WORKAROUND:
case CARDTYPE_PG600:
state->cardtype = ctrl->value;
break;
/* ----------------------------------------------------------------------- */
-struct i2c_driver i2c_driver_cx25840;
+static struct i2c_driver i2c_driver_cx25840;
static int cx25840_detect_client(struct i2c_adapter *adapter, int address,
int kind)
/* ----------------------------------------------------------------------- */
-struct i2c_driver i2c_driver_cx25840 = {
+static struct i2c_driver i2c_driver_cx25840 = {
.name = "cx25840",
.id = I2C_DRIVERID_CX25840,
#define CX25840_CID_CARDTYPE (V4L2_CID_PRIVATE_BASE+0)
+/* The CARDTYPE_PVR150_WORKAROUND cardtype activates a workaround for a
+ hardware bug that is present in PVR150 (and possible PVR500) cards that
+ have certain NTSC tuners (tveeprom model numbers 85, 99 and 112). The
+ audio autodetect fails on some channels for these models and the workaround
+ is to select the audio standard explicitly. Many thanks to Hauppauge for
+ providing this information. */
enum cx25840_cardtype {
CARDTYPE_PVR150,
- CARDTYPE_PG600
+ CARDTYPE_PG600,
+ CARDTYPE_PVR150_WORKAROUND,
};
enum cx25840_input {
If you are unsure, choose Y.
config VIDEO_CX88_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
Connexant 2388x chip and the MT352 demodulator.
config VIDEO_CX88_DVB_OR51132
- tristate "OR51132 ATSC Support"
- default m
+ bool "OR51132 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_OR51132
---help---
Connexant 2388x chip and the OR51132 demodulator.
config VIDEO_CX88_DVB_CX22702
- tristate "Conexant CX22702 DVB-T Support"
- default m
+ bool "Conexant CX22702 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_CX22702
---help---
Connexant 2388x chip and the CX22702 demodulator.
config VIDEO_CX88_DVB_LGDT330X
- tristate "LG Electronics DT3302/DT3303 ATSC Support"
- default m
+ bool "LG Electronics DT3302/DT3303 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_LGDT330X
---help---
Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
config VIDEO_CX88_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
-endif
-ifneq ($(CONFIG_DVB_CX22702),n)
- EXTRA_CFLAGS += -DHAVE_CX22702=1
-endif
-ifneq ($(CONFIG_DVB_OR51132),n)
- EXTRA_CFLAGS += -DHAVE_OR51132=1
-endif
-ifneq ($(CONFIG_DVB_LGDT330X),n)
- EXTRA_CFLAGS += -DHAVE_LGDT330X=1
-endif
-ifneq ($(CONFIG_DVB_MT352),n)
- EXTRA_CFLAGS += -DHAVE_MT352=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif
+
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_DVB_CX22702) += -DHAVE_CX22702=1
+extra-cflags-$(CONFIG_DVB_OR51132) += -DHAVE_OR51132=1
+extra-cflags-$(CONFIG_DVB_LGDT330X) += -DHAVE_LGDT330X=1
+extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
+extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
core->tuner_type = tv.tuner_type;
core->has_radio = tv.has_radio;
-}
-
-static int hauppauge_eeprom_dvb(struct cx88_core *core, u8 *ee)
-{
- int model;
- int tuner;
/* Make sure we support the board model */
- model = ee[0x1f] << 24 | ee[0x1e] << 16 | ee[0x1d] << 8 | ee[0x1c];
- switch(model) {
- case 90002:
- case 90500:
- case 90501:
+ switch (tv.model)
+ {
+ case 90002: /* Nova-T-PCI (9002) */
+ case 92001: /* Nova-S-Plus (Video and IR) */
+ case 92002: /* Nova-S-Plus (Video and IR) */
+ case 90003: /* Nova-T-PCI (9002 No RF out) */
+ case 90500: /* Nova-T-PCI (oem) */
+ case 90501: /* Nova-T-PCI (oem/IR) */
+ case 92000: /* Nova-SE2 (OEM, No Video or IR) */
+
/* known */
break;
default:
printk("%s: warning: unknown hauppauge model #%d\n",
- core->name, model);
+ core->name, tv.model);
break;
}
- /* Make sure we support the tuner */
- tuner = ee[0x2d];
- switch(tuner) {
- case 0x4B: /* dtt 7595 */
- case 0x4C: /* dtt 7592 */
- break;
- default:
- printk("%s: error: unknown hauppauge tuner 0x%02x\n",
- core->name, tuner);
- return -ENODEV;
- }
- printk(KERN_INFO "%s: hauppauge eeprom: model=%d, tuner=%d\n",
- core->name, model, tuner);
- return 0;
+ printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+ core->name, tv.model);
}
/* ----------------------------------------------------------------------- */
void cx88_card_setup(struct cx88_core *core)
{
- static u8 eeprom[128];
+ static u8 eeprom[256];
if (0 == core->i2c_rc) {
core->i2c_client.addr = 0xa0 >> 1;
break;
case CX88_BOARD_HAUPPAUGE_DVB_T1:
if (0 == core->i2c_rc)
- hauppauge_eeprom_dvb(core,eeprom);
+ hauppauge_eeprom(core,eeprom);
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
return -1;
}
+int cx88_start_audio_dma(struct cx88_core *core)
+{
+ /* setup fifo + format */
+ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
+ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+
+ cx_write(MO_AUDD_LNGTH, 128); /* fifo bpl size */
+ cx_write(MO_AUDR_LNGTH, 128); /* fifo bpl size */
+
+ /* start dma */
+ cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
+
+ return 0;
+}
+
+int cx88_stop_audio_dma(struct cx88_core *core)
+{
+ /* stop dma */
+ cx_write(MO_AUD_DMACNTRL, 0x0000);
+
+ return 0;
+}
+
static int set_tvaudio(struct cx88_core *core)
{
struct cx88_tvnorm *norm = core->tvnorm;
cx88_set_tvaudio(core);
/* cx88_set_stereo(dev,V4L2_TUNER_MODE_STEREO); */
- cx_write(MO_AUDD_LNGTH, 128); /* fifo size */
- cx_write(MO_AUDR_LNGTH, 128); /* fifo size */
- cx_write(MO_AUD_DMACNTRL, 0x03); /* need audio fifo */
+/*
+ This should be needed only on cx88-alsa. It seems that some cx88 chips have
+ bugs and does require DMA enabled for it to work.
+ */
+ cx88_start_audio_dma(core);
return 0;
}
+
+
int cx88_set_tvnorm(struct cx88_core *core, struct cx88_tvnorm *norm)
{
u32 fsc8;
EXPORT_SYMBOL(cx88_vdev_init);
EXPORT_SYMBOL(cx88_core_get);
EXPORT_SYMBOL(cx88_core_put);
+EXPORT_SYMBOL(cx88_start_audio_dma);
+EXPORT_SYMBOL(cx88_stop_audio_dma);
/*
* Local variables:
static void set_audio_start(struct cx88_core *core, u32 mode)
{
- // mute
+ /* mute */
cx_write(AUD_VOL_CTL, (1 << 6));
- // start programming
- cx_write(MO_AUD_DMACNTRL, 0x0000);
- msleep(100);
- //cx_write(AUD_CTL, 0x0000);
+ /* start programming */
cx_write(AUD_INIT, mode);
cx_write(AUD_INIT_LD, 0x0001);
cx_write(AUD_SOFT_RESET, 0x0001);
{
u32 volume;
+ /* restart dma; This avoids buzz in NICAM and is good in others */
+ cx88_stop_audio_dma(core);
+ cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
+ cx88_start_audio_dma(core);
+
if (cx88_boards[core->board].blackbird) {
- // sets sound input from external adc
+ /* sets sound input from external adc */
cx_set(AUD_CTL, EN_I2SIN_ENABLE);
- //cx_write(AUD_I2SINPUTCNTL, 0);
cx_write(AUD_I2SINPUTCNTL, 4);
cx_write(AUD_BAUDRATE, 1);
- // 'pass-thru mode': this enables the i2s output to the mpeg encoder
+ /* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
cx_set(AUD_CTL, EN_I2SOUT_ENABLE);
cx_write(AUD_I2SOUTPUTCNTL, 1);
cx_write(AUD_I2SCNTL, 0);
- //cx_write(AUD_APB_IN_RATE_ADJ, 0);
+ /* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
} else {
ctl |= EN_DAC_ENABLE;
cx_write(AUD_CTL, ctl);
/* finish programming */
cx_write(AUD_SOFT_RESET, 0x0000);
- cx_write(MO_AUD_DMACNTRL, 0x0003);
/* unmute */
volume = cx_sread(SHADOW_AUD_VOL_CTL);
{AUD_RATE_ADJ3, 0x00000100},
{AUD_RATE_ADJ4, 0x00000400},
{AUD_RATE_ADJ5, 0x00001000},
- //{ AUD_DMD_RA_DDS, 0x00c0d5ce },
{AUD_ERRLOGPERIOD_R, 0x00000fff},
{AUD_ERRINTRPTTHSHLD1_R, 0x000003ff},
{AUD_ERRINTRPTTHSHLD2_R, 0x000000ff},
set_audio_registers(core, nicam_l);
break;
case WW_I:
- dprintk("%s PAL-I NICAM (status: devel)\n", __FUNCTION__);
+ dprintk("%s PAL-I NICAM (status: known-good)\n", __FUNCTION__);
set_audio_registers(core, nicam_bgdki_common);
set_audio_registers(core, nicam_i);
break;
default:
- dprintk("%s PAL-BGDK NICAM (status: unknown)\n", __FUNCTION__);
+ dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __FUNCTION__);
set_audio_registers(core, nicam_bgdki_common);
set_audio_registers(core, nicam_default);
break;
/* if bit1=1 then nicam is detected */
j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1);
- /* 3x detected: absolutly sure now */
- if (j == 3) {
+ if (j == 1) {
dprintk("nicam is detected.\n");
return 1;
}
extern void cx88_core_put(struct cx88_core *core,
struct pci_dev *pci);
+extern int cx88_start_audio_dma(struct cx88_core *core);
+extern int cx88_stop_audio_dma(struct cx88_core *core);
+
+
/* ----------------------------------------------------------- */
/* cx88-vbi.c */
/* #define ENABLE_DEBUG_ISOC_FRAMES */
-unsigned int core_debug;
+static unsigned int core_debug;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
-unsigned int reg_debug;
+static unsigned int reg_debug;
module_param(reg_debug,int,0644);
MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
-unsigned int isoc_debug;
+static unsigned int isoc_debug;
module_param(isoc_debug,int,0644);
MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]");
* em28xx_config_i2c()
* configure i2c attached devices
*/
-void em28xx_config_i2c(struct em28xx *dev)
+static void em28xx_config_i2c(struct em28xx *dev)
{
struct v4l2_frequency f;
struct video_decoder_init em28xx_vdi = {.data = NULL };
static struct i2c_driver driver = {
.name = "ir remote kbd driver",
- .id = I2C_DRIVERID_EXP3, /* FIXME */
+ .id = I2C_DRIVERID_I2C_IR,
.flags = I2C_DF_NOTIFY,
.attach_adapter = ir_probe,
.detach_client = ir_detach,
static void saa7115_log_status(struct i2c_client *client)
{
- static const char * const audclk_freq_strs[] = {
- "44.1 kHz",
- "48 kHz",
- "32 kHz"
- };
struct saa7115_state *state = i2c_get_clientdata(client);
+ char *audfreq = "undefined";
int reg1e, reg1f;
int signalOk;
int vcr;
- saa7115_info("Audio frequency: %s\n", audclk_freq_strs[state->audclk_freq]);
+ switch (state->audclk_freq) {
+ case V4L2_AUDCLK_32_KHZ: audfreq = "32 kHz"; break;
+ case V4L2_AUDCLK_441_KHZ: audfreq = "44.1 kHz"; break;
+ case V4L2_AUDCLK_48_KHZ: audfreq = "48 kHz"; break;
+ }
+
+ saa7115_info("Audio frequency: %s\n", audfreq);
if (client->name[6] == '4') {
/* status for the saa7114 */
reg1f = saa7115_read(client, 0x1f);
case VIDEO_MODE_SECAM:
saa711x_write(client, 0x08,
- (decoder->reg[0x0e] & 0x3f) | 0x00);
+ (decoder->reg[0x08] & 0x3f) | 0x00);
saa711x_write(client, 0x0e,
(decoder->reg[0x0e] & 0x8f) | 0x50);
break;
};
#define SAA7127_50HZ_DAC_CONTROL 0x02
-struct i2c_reg_value saa7127_init_config_50hz[] = {
+static struct i2c_reg_value saa7127_init_config_50hz[] = {
{ SAA7127_REG_BURST_START, 0x21 },
/* BURST_END is also used as a chip ID in saa7127_detect_client */
{ SAA7127_REG_BURST_END, 0x1d },
/* ----------------------------------------------------------------------- */
-struct i2c_driver i2c_driver_saa7127;
+static struct i2c_driver i2c_driver_saa7127;
/* ----------------------------------------------------------------------- */
/* ----------------------------------------------------------------------- */
-struct i2c_driver i2c_driver_saa7127 = {
+static struct i2c_driver i2c_driver_saa7127 = {
.name = "saa7127",
.id = I2C_DRIVERID_SAA7127,
.flags = I2C_DF_NOTIFY,
If you are unsure, choose Y.
config VIDEO_SAA7134_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
Philips saa7134 chip and the MT352 demodulator.
config VIDEO_SAA7134_DVB_TDA1004X
- tristate "Phillips TDA10045H/TDA10046H DVB-T Support"
- default m
+ bool "Phillips TDA10045H/TDA10046H DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_TDA1004X
---help---
Philips saa7134 chip and the TDA10045H/TDA10046H demodulator.
config VIDEO_SAA7134_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
-endif
-ifneq ($(CONFIG_DVB_MT352),n)
- EXTRA_CFLAGS += -DHAVE_MT352=1
-endif
-ifneq ($(CONFIG_DVB_TDA1004X),n)
- EXTRA_CFLAGS += -DHAVE_TDA1004X=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif
+
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
+extra-cflags-$(CONFIG_DVB_TDA1004X) += -DHAVE_TDA1004X=1
+extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
-int position;
-
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ## arg)
*
*/
-void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status)
+static void saa7134_irq_alsa_done(struct saa7134_dev *dev,
+ unsigned long status)
{
int next_blk, reg = 0;
*
*/
-int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum)
+static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum)
{
snd_card_t *card;
sprintf(card->longname, "%s at 0x%lx irq %d",
chip->dev->name, chip->iobase, chip->irq);
+ printk(KERN_INFO "%s/alsa: %s registered as card %d\n",dev->name,card->longname,index[devnum]);
+
if ((err = snd_card_register(card)) == 0) {
snd_saa7134_cards[devnum] = card;
return 0;
return err;
}
+
+static int alsa_device_init(struct saa7134_dev *dev)
+{
+ dev->dmasound.priv_data = dev;
+ alsa_card_saa7134_create(dev,dev->nr);
+ return 1;
+}
+
+static int alsa_device_exit(struct saa7134_dev *dev)
+{
+
+ snd_card_free(snd_saa7134_cards[dev->nr]);
+ snd_saa7134_cards[dev->nr] = NULL;
+ return 1;
+}
+
/*
* Module initializer
*
struct saa7134_dev *dev = NULL;
struct list_head *list;
- position = 0;
-
printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n");
list_for_each(list,&saa7134_devlist) {
dev = list_entry(list, struct saa7134_dev, devlist);
if (dev->dmasound.priv_data == NULL) {
- dev->dmasound.priv_data = dev;
- alsa_card_saa7134_create(dev,position);
- position++;
+ alsa_device_init(dev);
} else {
printk(KERN_ERR "saa7134 ALSA: DMA sound is being handled by OSS. ignoring %s\n",dev->name);
return -EBUSY;
}
}
+ dmasound_init = alsa_device_init;
+ dmasound_exit = alsa_device_exit;
+
if (dev == NULL)
printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n");
* Module destructor
*/
-void saa7134_alsa_exit(void)
+static void saa7134_alsa_exit(void)
{
int idx;
static LIST_HEAD(mops_list);
static unsigned int saa7134_devcount;
+int (*dmasound_init)(struct saa7134_dev *dev);
+int (*dmasound_exit)(struct saa7134_dev *dev);
+
#define dprintk(fmt, arg...) if (core_debug) \
printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
/* ----------------------------------------------------------- */
/* delayed request_module */
-#ifdef CONFIG_MODULES
-
+#if defined(CONFIG_MODULES) && defined(MODULE)
static int need_empress;
static int need_dvb;
static int need_alsa;
}
#else
-
#define request_module_depend(name,flag)
-
#endif /* CONFIG_MODULES */
/* ------------------------------------------------------------------ */
/* check for signal */
saa7134_irq_video_intl(dev);
+ if (dmasound_init && !dev->dmasound.priv_data) {
+ dmasound_init(dev);
+ }
+
return 0;
fail4:
struct list_head *item;
struct saa7134_mpeg_ops *mops;
+ /* Release DMA sound modules if present */
+ if (dmasound_exit && dev->dmasound.priv_data) {
+ dmasound_exit(dev);
+ }
+
/* debugging ... */
if (irq_debug) {
u32 report = saa_readl(SAA7134_IRQ_REPORT);
saa7134_i2c_unregister(dev);
saa7134_unregister_video(dev);
+
/* the DMA sound modules should be unloaded before reaching
this, but just in case they are still present... */
if (dev->dmasound.priv_data != NULL) {
dev->dmasound.priv_data = NULL;
}
+
/* release resources */
free_irq(pci_dev->irq, dev);
iounmap(dev->lmmio);
static void saa7134_fini(void)
{
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) && defined(MODULE)
if (pending_registered)
unregister_module_notifier(&pending_notifier);
-#endif
+#endif /* CONFIG_MODULES */
pci_unregister_driver(&saa7134_pci_driver);
}
/* ----------------- for the DMA sound modules --------------- */
+EXPORT_SYMBOL(dmasound_init);
+EXPORT_SYMBOL(dmasound_exit);
EXPORT_SYMBOL(saa7134_pgtable_free);
EXPORT_SYMBOL(saa7134_pgtable_build);
EXPORT_SYMBOL(saa7134_pgtable_alloc);
spin_unlock(&dev->slock);
}
-int saa7134_dsp_create(struct saa7134_dev *dev)
+static int saa7134_dsp_create(struct saa7134_dev *dev)
{
int err;
- err = dev->dmasound.minor_dsp =
- register_sound_dsp(&saa7134_dsp_fops,
- dsp_nr[dev->nr]);
- if (err < 0) {
- goto fail;
- }
- printk(KERN_INFO "%s: registered device dsp%d\n",
- dev->name,dev->dmasound.minor_dsp >> 4);
-
- err = dev->dmasound.minor_mixer =
- register_sound_mixer(&saa7134_mixer_fops,
- mixer_nr[dev->nr]);
- if (err < 0)
- goto fail;
- printk(KERN_INFO "%s: registered device mixer%d\n",
- dev->name,dev->dmasound.minor_mixer >> 4);
+ err = dev->dmasound.minor_dsp =
+ register_sound_dsp(&saa7134_dsp_fops,
+ dsp_nr[dev->nr]);
+ if (err < 0) {
+ goto fail;
+ }
+ printk(KERN_INFO "%s: registered device dsp%d\n",
+ dev->name,dev->dmasound.minor_dsp >> 4);
+
+ err = dev->dmasound.minor_mixer =
+ register_sound_mixer(&saa7134_mixer_fops,
+ mixer_nr[dev->nr]);
+ if (err < 0)
+ goto fail;
+ printk(KERN_INFO "%s: registered device mixer%d\n",
+ dev->name,dev->dmasound.minor_mixer >> 4);
return 0;
}
+static int oss_device_init(struct saa7134_dev *dev)
+{
+ dev->dmasound.priv_data = dev;
+ saa7134_oss_init1(dev);
+ saa7134_dsp_create(dev);
+ return 1;
+}
+
+static int oss_device_exit(struct saa7134_dev *dev)
+{
+
+ unregister_sound_mixer(dev->dmasound.minor_mixer);
+ unregister_sound_dsp(dev->dmasound.minor_dsp);
+
+ saa7134_oss_fini(dev);
+
+ if (dev->pci->irq > 0) {
+ synchronize_irq(dev->pci->irq);
+ free_irq(dev->pci->irq,&dev->dmasound);
+ }
+
+ dev->dmasound.priv_data = NULL;
+ return 1;
+}
+
static int saa7134_oss_init(void)
{
struct saa7134_dev *dev = NULL;
list_for_each(list,&saa7134_devlist) {
dev = list_entry(list, struct saa7134_dev, devlist);
if (dev->dmasound.priv_data == NULL) {
- dev->dmasound.priv_data = dev;
- saa7134_oss_init1(dev);
- saa7134_dsp_create(dev);
+ oss_device_init(dev);
} else {
printk(KERN_ERR "saa7134 OSS: DMA sound is being handled by ALSA, ignoring %s\n",dev->name);
return -EBUSY;
if (dev == NULL)
printk(KERN_INFO "saa7134 OSS: no saa7134 cards found\n");
+ dmasound_init = oss_device_init;
+ dmasound_exit = oss_device_exit;
+
return 0;
}
-void saa7134_oss_exit(void)
+static void saa7134_oss_exit(void)
{
struct saa7134_dev *dev = NULL;
struct list_head *list;
if (!dev->dmasound.minor_dsp)
continue;
- unregister_sound_mixer(dev->dmasound.minor_mixer);
- unregister_sound_dsp(dev->dmasound.minor_dsp);
-
- saa7134_oss_fini(dev);
-
- if (dev->pci->irq > 0) {
- synchronize_irq(dev->pci->irq);
- free_irq(dev->pci->irq,&dev->dmasound);
- }
-
- dev->dmasound.priv_data = NULL;
-
+ oss_device_exit(dev);
}
printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n");
int saa7134_set_dmabits(struct saa7134_dev *dev);
+extern int (*dmasound_init)(struct saa7134_dev *dev);
+extern int (*dmasound_exit)(struct saa7134_dev *dev);
+
+
/* ----------------------------------------------------------- */
/* saa7134-cards.c */
{ 0x00000010, " PAL(I)" },
{ 0x00400000, " SECAM(L/L')" },
{ 0x00000e00, " PAL(D/K)" },
- { 0x03000000, " ATSC Digital" },
+ { 0x03000000, " ATSC/DVB Digital" },
};
/* This is the full list of possible tuners. Many thanks to Hauppauge for
{ TUNER_ABSENT, "Philips FMD1216ME"},
{ TUNER_TEA5767, "Philips TEA5768HL FM Radio"},
{ TUNER_ABSENT, "Panasonic ENV57H12D5"},
- { TUNER_ABSENT, "TCL MFNM05-4"},
+ { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"},
{ TUNER_ABSENT, "TCL MNM05-4"},
{ TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"},
{ TUNER_ABSENT, "TCL MQNM05-4"},
{ TUNER_ABSENT, "LG TAPC-W701D"},
{ TUNER_ABSENT, "TCL 9886P-WM"},
{ TUNER_ABSENT, "TCL 1676NM-WM"},
+ /* 110-119 */
+ { TUNER_ABSENT, "Thompson DTT75105"},
+ { TUNER_ABSENT, "Conexant_CX24109"},
+ { TUNER_ABSENT, "TCL M2523_5N_E"},
+ { TUNER_ABSENT, "TCL M2523_3DB_E"},
+ { TUNER_ABSENT, "Philips 8275A"},
+ { TUNER_ABSENT, "Microtune MT2060"},
+ { TUNER_ABSENT, "Philips FM1236 MK5"},
+ { TUNER_ABSENT, "Philips FM1216ME MK5"},
+ { TUNER_ABSENT, "TCL M2523_3DI_E"},
+ { TUNER_ABSENT, "Samsung THPD5222FG30A"},
+ /* 120-129 */
+ { TUNER_ABSENT, "Xceive XC3028"},
+ { TUNER_ABSENT, "Philips FQ1216LME MK5"},
};
static struct HAUPPAUGE_AUDIOIC
case 78: //PNPEnv_TUNER_TDA8275C1_8290_FM:
case 89: //PNPEnv_TUNER_TCL_MFPE05_2:
case 92: //PNPEnv_TUNER_PHILIPS_FQ1236A_MK4:
+ case 105:
return 1;
}
return 0;
memset(tvee, 0, sizeof(*tvee));
done = len = beenhere = 0;
- /* Hack for processing eeprom for em28xx */
- if ((eeprom_data[0]==0x1a)&&(eeprom_data[1]==0xeb)&&
- (eeprom_data[2]==0x67)&&(eeprom_data[3]==0x95))
- start=0xa0;
+ /* Hack for processing eeprom for em28xx and cx 2388x*/
+ if ((eeprom_data[0] == 0x1a) && (eeprom_data[1] == 0xeb) &&
+ (eeprom_data[2] == 0x67) && (eeprom_data[3] == 0x95))
+ start=0xa0; /* Generic em28xx offset */
+ else if (((eeprom_data[0] & 0xf0) == 0x10) &&
+ (eeprom_data[1] == 0x00) &&
+ (eeprom_data[2] == 0x00) &&
+ (eeprom_data[8] == 0x84))
+ start=8; /* Generic cx2388x offset */
else
start=0;
eeprom_data[i+5] +
(eeprom_data[i+6] << 8) +
(eeprom_data[i+7] << 16);
+
+ if ( (eeprom_data[i + 8] && 0xf0) &&
+ (tvee->serial_number < 0xffffff) ) {
+ tvee->MAC_address[0] = 0x00;
+ tvee->MAC_address[1] = 0x0D;
+ tvee->MAC_address[2] = 0xFE;
+ tvee->MAC_address[3] = eeprom_data[i + 7];
+ tvee->MAC_address[4] = eeprom_data[i + 6];
+ tvee->MAC_address[5] = eeprom_data[i + 5];
+ tvee->has_MAC_address = 1;
+ }
break;
case 0x05:
case 0x06:
/* tag 'ModelRev' */
tvee->model =
- eeprom_data[i+1] +
- (eeprom_data[i+2] << 8);
- tvee->revision = eeprom_data[i+5] +
- (eeprom_data[i+6] << 8) +
- (eeprom_data[i+7] << 16);
+ eeprom_data[i + 1] +
+ (eeprom_data[i + 2] << 8) +
+ (eeprom_data[i + 3] << 16) +
+ (eeprom_data[i + 4] << 24);
+ tvee->revision =
+ eeprom_data[i +5 ] +
+ (eeprom_data[i + 6] << 8) +
+ (eeprom_data[i + 7] << 16);
break;
case 0x07:
t_name2 = "unknown";
}
+ tvee->tuner_hauppauge_model = tuner1;
+ tvee->tuner2_hauppauge_model = tuner2;
tvee->tuner_formats = 0;
tvee->tuner2_formats = 0;
for (i = j = 0; i < 8; i++) {
tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n",
tvee->model, tvee->rev_str, tvee->serial_number);
+ if (tvee->has_MAC_address == 1) {
+ tveeprom_info("MAC address is %02X-%02X-%02X-%02X-%02X-%02X\n",
+ tvee->MAC_address[0], tvee->MAC_address[1],
+ tvee->MAC_address[2], tvee->MAC_address[3],
+ tvee->MAC_address[4], tvee->MAC_address[5]);
+ }
tveeprom_info("tuner model is %s (idx %d, type %d)\n",
t_name1, tuner1, tvee->tuner_type);
tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n",
int retval;
/* setup stuff */
- retval = -ENOMEM;
q->read_buf = videobuf_alloc(q->msize);
if (NULL == q->read_buf)
- goto done;
+ return -ENOMEM;
q->read_buf->memory = V4L2_MEMORY_USERPTR;
q->read_buf->baddr = (unsigned long)data;
if (NULL == q->read_buf)
goto done;
q->read_buf->memory = V4L2_MEMORY_USERPTR;
+ q->read_buf->bsize = count; /* preferred size */
field = videobuf_next_field(q);
retval = q->ops->buf_prepare(q,q->read_buf,field);
- if (0 != retval)
+ if (0 != retval) {
+ kfree (q->read_buf);
+ q->read_buf = NULL;
goto done;
+ }
spin_lock_irqsave(q->irqlock,flags);
q->ops->buf_queue(q,q->read_buf);
spin_unlock_irqrestore(q->irqlock,flags);
}
static struct class video_class = {
- .name = VIDEO_NAME,
+ .name = VIDEO_NAME,
.release = video_release,
};
/*
- * Active devices
+ * Active devices
*/
-
+
static struct video_device *video_device[VIDEO_NUM_DEVICES];
static DECLARE_MUTEX(videodev_lock);
int err = 0;
struct video_device *vfl;
struct file_operations *old_fops;
-
+
if(minor>=VIDEO_NUM_DEVICES)
return -ENODEV;
down(&videodev_lock);
return -ENOMEM;
parg = mbuf;
}
-
+
err = -EFAULT;
if (_IOC_DIR(cmd) & _IOC_WRITE)
if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
int video_exclusive_release(struct inode *inode, struct file *file)
{
struct video_device *vfl = video_devdata(file);
-
+
vfl->users--;
return 0;
}
* @type: type of device to register
* @nr: which device number (0 == /dev/video0, 1 == /dev/video1, ...
* -1 == first free)
- *
+ *
* The registration code assigns minor numbers based on the type
* requested. -ENFILE is returned in all the device slots for this
* category are full. If not then the minor field is set and the
*
* %VFL_TYPE_VBI - Vertical blank data (undecoded)
*
- * %VFL_TYPE_RADIO - A radio card
+ * %VFL_TYPE_RADIO - A radio card
*/
int video_register_device(struct video_device *vfd, int type, int nr)
int base;
int end;
char *name_base;
-
+
switch(type)
{
case VFL_TYPE_GRABBER:
break;
case VFL_TYPE_VBI:
base=224;
- end=240;
+ end=256;
name_base = "vbi";
break;
case VFL_TYPE_RADIO:
init_MUTEX(&vfd->lock);
/* sysfs class */
- memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev));
+ memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev));
if (vfd->dev)
vfd->class_dev.dev = vfd->dev;
vfd->class_dev.class = &video_class;
* This unregisters the passed device and deassigns the minor
* number. Future open calls will be met with errors.
*/
-
+
void video_unregister_device(struct video_device *vfd)
{
down(&videodev_lock);
/*
* Initialise video for linux
*/
-
+
static int __init videodev_init(void)
{
int ret;
* Public data...
*/
int mpt_lan_index = -1;
-static int mpt_stm_index = -1;
+int mpt_stm_index = -1;
-static struct proc_dir_entry *mpt_proc_root_dir;
+struct proc_dir_entry *mpt_proc_root_dir;
#define WHOINIT_UNKNOWN 0xAA
EXPORT_SYMBOL(mpt_suspend);
#endif
EXPORT_SYMBOL(ioc_list);
+EXPORT_SYMBOL(mpt_proc_root_dir);
EXPORT_SYMBOL(mpt_register);
EXPORT_SYMBOL(mpt_deregister);
EXPORT_SYMBOL(mpt_event_register);
EXPORT_SYMBOL(mpt_GetIocState);
EXPORT_SYMBOL(mpt_print_ioc_summary);
EXPORT_SYMBOL(mpt_lan_index);
+EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
EXPORT_SYMBOL(mpt_toolbox);
* Public data decl's...
*/
extern struct list_head ioc_list;
+extern struct proc_dir_entry *mpt_proc_root_dir;
extern int mpt_lan_index; /* needed by mptlan.c */
+extern int mpt_stm_index; /* needed by mptstm.c */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
cmd.opcode = SD_SEND_RELATIVE_ADDR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R6;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
*
* (C) 2000 Red Hat. GPL'd
*
- * $Id: cfi_cmdset_0001.c,v 1.185 2005/11/07 11:14:22 gleixner Exp $
+ * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
*
*
* 10/10/2000 Nicolas Pitre <nico@cam.org>
*
* - contension arbitration is handled in the owner's context.
*
- * The 'shared' struct can be read when its lock is taken.
- * However any writes to it can only be made when the current
- * owner's lock is also held.
+ * The 'shared' struct can be read and/or written only when
+ * its lock is taken.
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
}
timeo = jiffies + HZ;
spin_lock(&shared->lock);
+ spin_unlock(contender->mutex);
}
/* We now own it */
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- if (contender && contender != chip)
- spin_unlock(contender->mutex);
spin_unlock(&shared->lock);
}
/*
Common Flash Interface probe code.
(C) 2000 Red Hat. GPL'd.
- $Id: cfi_probe.c,v 1.84 2005/11/07 11:14:23 gleixner Exp $
+ $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
*/
#include <linux/config.h>
cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
- cfi->mfr = cfi_read_query(map, base);
- cfi->id = cfi_read_query(map, base + ofs_factor);
+ cfi->mfr = cfi_read_query16(map, base);
+ cfi->id = cfi_read_query16(map, base + ofs_factor);
/* Put it back into Read Mode */
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
.module = THIS_MODULE
};
-int __init cfi_probe_init(void)
+static int __init cfi_probe_init(void)
{
register_mtd_chip_driver(&cfi_chipdrv);
return 0;
* Copyright 2000,2001 David A. Schleef <ds@schleef.org>
* 2000,2001 Lineo, Inc.
*
- * $Id: sharp.c,v 1.16 2005/11/07 11:14:23 gleixner Exp $
+ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $
*
* Devices supported:
* LH28F016SCT Symmetrical block flash memory, 2Mx8
return mtd;
}
+static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr)
+{
+ map_word map_cmd;
+ map_cmd.x[0] = cmd;
+ map_write(map, map_cmd, adr);
+}
+
static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
{
- unsigned long tmp;
+ map_word tmp, read0, read4;
unsigned long base = 0;
- u32 read0, read4;
int width = 4;
- tmp = map_read32(map, base+0);
+ tmp = map_read(map, base+0);
- map_write32(map, CMD_READ_ID, base+0);
+ sharp_send_cmd(map, CMD_READ_ID, base+0);
- read0=map_read32(map, base+0);
- read4=map_read32(map, base+4);
- if(read0 == 0x89898989){
+ read0 = map_read(map, base+0);
+ read4 = map_read(map, base+4);
+ if(read0.x[0] == 0x89898989){
printk("Looks like sharp flash\n");
- switch(read4){
+ switch(read4.x[0]){
case 0xaaaaaaaa:
case 0xa0a0a0a0:
/* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
return width;
#endif
default:
- printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n",
- read0,read4);
+ printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n",
+ read0.x[0], read4.x[0]);
}
- }else if((map_read32(map, base+0) == CMD_READ_ID)){
+ }else if((map_read(map, base+0).x[0] == CMD_READ_ID)){
/* RAM, probably */
printk("Looks like RAM\n");
- map_write32(map, tmp, base+0);
+ map_write(map, tmp, base+0);
}else{
- printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n",
- read0,read4);
+ printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n",
+ read0.x[0], read4.x[0]);
}
return 0;
/* This function returns with the chip->mutex lock held. */
static int sharp_wait(struct map_info *map, struct flchip *chip)
{
- int status, i;
+ int i;
+ map_word status;
unsigned long timeo = jiffies + HZ;
DECLARE_WAITQUEUE(wait, current);
int adr = 0;
switch(chip->state){
case FL_READY:
- map_write32(map,CMD_READ_STATUS,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
chip->state = FL_STATUS;
case FL_STATUS:
for(i=0;i<100;i++){
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY)==SR_READY)
break;
udelay(1);
}
goto retry;
}
- map_write32(map,CMD_RESET, adr);
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
int timeo;
int try;
int i;
- int status = 0;
+ map_word data, status;
+ status.x[0] = 0;
ret = sharp_wait(map,chip);
for(try=0;try<10;try++){
- map_write32(map,CMD_BYTE_WRITE,adr);
+ sharp_send_cmd(map, CMD_BYTE_WRITE, adr);
/* cpu_to_le32 -> hack to fix the writel be->le conversion */
- map_write32(map,cpu_to_le32(datum),adr);
+ data.x[0] = cpu_to_le32(datum);
+ map_write(map, data, adr);
chip->state = FL_WRITING;
timeo = jiffies + (HZ/2);
- map_write32(map,CMD_READ_STATUS,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
for(i=0;i<100;i++){
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY) == SR_READY)
break;
}
if(i==100){
printk("sharp: timed out writing\n");
}
- if(!(status&SR_ERRORS))
+ if(!(status.x[0] & SR_ERRORS))
break;
- printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status);
+ printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
}
- map_write32(map,CMD_RESET,adr);
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
wake_up(&chip->wq);
{
int ret;
unsigned long timeo;
- int status;
+ map_word status;
DECLARE_WAITQUEUE(wait, current);
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
timeo = jiffies + HZ;
while(time_before(jiffies, timeo)){
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY){
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY)==SR_READY){
ret = 0;
goto out;
}
{
int ret;
//int timeo;
- int status;
+ map_word status;
//int i;
//printk("sharp_erase_oneblock()\n");
sharp_unlock_oneblock(map,chip,adr);
#endif
- map_write32(map,CMD_BLOCK_ERASE_1,adr);
- map_write32(map,CMD_BLOCK_ERASE_2,adr);
+ sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr);
+ sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr);
chip->state = FL_ERASING;
ret = sharp_do_wait_for_ready(map,chip,adr);
if(ret<0)return ret;
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
- if(!(status&SR_ERRORS)){
- map_write32(map,CMD_RESET,adr);
+ if(!(status.x[0] & SR_ERRORS)){
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
//spin_unlock_bh(chip->mutex);
return 0;
}
- printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
//spin_unlock_bh(chip->mutex);
unsigned long adr)
{
int i;
- int status;
+ map_word status;
- map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr);
- map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr);
+ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr);
+ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr);
udelay(100);
- status = map_read32(map,adr);
- printk("status=%08x\n",status);
+ status = map_read(map, adr);
+ printk("status=%08lx\n", status.x[0]);
for(i=0;i<1000;i++){
- //map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ //sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY) == SR_READY)
break;
udelay(100);
}
printk("sharp: timed out unlocking block\n");
}
- if(!(status&SR_ERRORS)){
- map_write32(map,CMD_RESET,adr);
+ if(!(status.x[0] & SR_ERRORS)){
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
return;
}
- printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
}
#endif
/*
- * $Id: block2mtd.c,v 1.29 2005/11/07 11:14:24 gleixner Exp $
+ * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
*
* block2mtd.c - create an mtd from a block device
*
#include <linux/mtd/mtd.h>
#include <linux/buffer_head.h>
-#define VERSION "$Revision: 1.29 $"
+#define VERSION "$Revision: 1.30 $"
#define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
#define PAGE_READAHEAD 64
-void cache_readahead(struct address_space *mapping, int index)
+static void cache_readahead(struct address_space *mapping, int index)
{
filler_t *filler = (filler_t*)mapping->a_ops->readpage;
int i, pagei;
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * $Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $
+ * $Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
*/
#include <linux/init.h>
switch (mips_machtype) {
case MACH_DS5000_200:
- csr = (volatile u32 *)KN02_CSR_BASE;
+ csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
if (*csr & KN02_CSR_BNK32M)
stride = 2;
break;
case MACH_DS5000_2X0:
case MACH_DS5900:
- csr = (volatile u32 *)KN03_MCR_BASE;
+ csr = (volatile u32 *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
if (*csr & KN03_MCR_BNK32M)
stride = 2;
break;
/* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $
+ * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
*
* Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
.owner = THIS_MODULE,
};
-int init_ftl(void)
+static int init_ftl(void)
{
- DEBUG(0, "$Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $\n");
+ DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
return register_mtd_blktrans(&ftl_tr);
}
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
-config MTD_PQ2FADS
- tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
- depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
- help
- This enables access to flash SIMM on PQ2FADS-like boards
-
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
-obj-$(CONFIG_MTD_PQ2FADS) += pq2fads.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
/*
- * $Id: ixp4xx.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
*
* drivers/mtd/maps/ixp4xx.c
*
#include <linux/reboot.h>
+/*
+ * Read/write a 16 bit word from flash address 'addr'.
+ *
+ * When the cpu is in little-endian mode it swizzles the address lines
+ * ('address coherency') so we need to undo the swizzling to ensure commands
+ * and the like end up on the correct flash address.
+ *
+ * To further complicate matters, due to the way the expansion bus controller
+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
+ * D15 D0
+ * +---+---+
+ * | A | B | 0
+ * +---+---+
+ * | C | D | 2
+ * +---+---+
+ * This means that on LE systems each 16 bit word must be swapped. Note that
+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
+ * data and other flash commands which are always in D7-D0.
+ */
#ifndef __ARMEB__
+#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP
+# error CONFIG_MTD_CFI_BE_BYTE_SWAP required
+#endif
+
+static inline u16 flash_read16(void __iomem *addr)
+{
+ return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
+}
+
#define BYTE0(h) ((h) & 0xFF)
#define BYTE1(h) (((h) >> 8) & 0xFF)
+
#else
+
+static inline u16 flash_read16(const void __iomem *addr)
+{
+ return __raw_readw(addr);
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(d, addr);
+}
+
#define BYTE0(h) (((h) >> 8) & 0xFF)
#define BYTE1(h) ((h) & 0xFF)
#endif
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
{
map_word val;
- val.x[0] = le16_to_cpu(readw(map->virt + ofs));
+ val.x[0] = flash_read16(map->virt + ofs);
return val;
}
static void ixp4xx_copy_from(struct map_info *map, void *to,
unsigned long from, ssize_t len)
{
- int i;
u8 *dest = (u8 *) to;
void __iomem *src = map->virt + from;
- u16 data;
- for (i = 0; i < (len / 2); i++) {
- data = le16_to_cpu(readw(src + 2*i));
- dest[i * 2] = BYTE0(data);
- dest[i * 2 + 1] = BYTE1(data);
+ if (len <= 0)
+ return;
+
+ if (from & 1) {
+ *dest++ = BYTE1(flash_read16(src));
+ src++;
+ --len;
}
- if (len & 1)
- dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i)));
+ while (len >= 2) {
+ u16 data = flash_read16(src);
+ *dest++ = BYTE0(data);
+ *dest++ = BYTE1(data);
+ src += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ *dest++ = BYTE0(flash_read16(src));
}
/*
static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
{
if (!(adr & 1))
- writew(cpu_to_le16(d.x[0]), map->virt + adr);
+ flash_write16(d.x[0], map->virt + adr);
}
/*
*/
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
{
- writew(cpu_to_le16(d.x[0]), map->virt + adr);
+ flash_write16(d.x[0], map->virt + adr);
}
struct ixp4xx_flash_info {
* (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
*
- * $Id: nettel.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
*/
/****************************************************************************/
}
if (nettel_intel_map.virt) {
iounmap(nettel_intel_map.virt);
- nettel_intel_map.virt = 0;
+ nettel_intel_map.virt = NULL;
}
#endif
}
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * $Id: pci.c,v 1.13 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
*
* Generic PCI memory map driver. We support the following boards:
* - Intel IQ80310 ATU.
memcpy_toio(map->base + map->translate(map, to), from, len);
}
-static struct map_info mtd_pci_map = {
+static const struct map_info mtd_pci_map = {
.phys = NO_XIP,
.copy_from = mtd_pci_copyfrom,
.copy_to = mtd_pci_copyto,
/*
- * $Id: physmap.c,v 1.38 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
*
* Normal mappings of chips in physical memory
*
#include <linux/mtd/map.h>
#include <linux/config.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
static struct mtd_info *mymtd;
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*
- * $Id: sc520cdp.c,v 1.22 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
*
*
* The SC520CDP is an evaluation board for the Elan SC520 processor available
unsigned long default_address;
};
-static struct sc520_par_table par_table[NUM_FLASH_BANKS] =
+static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
{
{ /* Flash Bank #0: selected by ROMCS0 */
SC520_PAR_ROMCS0,
/*
* Module initialization function
*/
-int __init ns_init_module(void)
+static int __init ns_init_module(void)
{
struct nand_chip *chip;
struct nandsim *nand;
#define PREFIX "rfd_ftl: "
-/* Major device # for FTL device */
-
-/* A request for this major has been sent to device@lanana.org */
+/* This major has been assigned by device@lanana.org */
#ifndef RFD_FTL_MAJOR
-#define RFD_FTL_MAJOR 95
+#define RFD_FTL_MAJOR 256
#endif
/* Maximum number of partitions in an FTL region */
#define DRV_MODULE_NAME "b44"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "0.96"
-#define DRV_MODULE_RELDATE "Nov 8, 2005"
+#define DRV_MODULE_VERSION "0.97"
+#define DRV_MODULE_RELDATE "Nov 30, 2005"
#define B44_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
add_timer(&bp->timer);
b44_enable_ints(bp);
+ netif_start_queue(dev);
out:
return err;
}
{
struct mii_ioctl_data *data = if_mii(ifr);
struct b44 *bp = netdev_priv(dev);
- int err;
+ int err = -EINVAL;
+
+ if (!netif_running(dev))
+ goto out;
spin_lock_irq(&bp->lock);
err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
spin_unlock_irq(&bp->lock);
-
+out:
return err;
}
add_timer(&bp->timer);
b44_enable_ints(bp);
+ netif_wake_queue(dev);
return 0;
}
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
return 0;
}
- if(htons(ETH_P_IP) == skb->protocol) {
- const struct iphdr *ip = skb->nh.iph;
- if(IPPROTO_UDP == ip->protocol) {
- struct udphdr *udp = (struct udphdr *)(skb->h.uh);
- if(ntohs(udp->dest) == 67) {
- offset = (uint8_t *)udp + 8 - skb->data;
- length = skb->len - offset;
-
- return e1000_mng_write_dhcp_info(hw,
- (uint8_t *)udp + 8, length);
- }
- }
- } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
+ if ((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
struct ethhdr *eth = (struct ethhdr *) skb->data;
if((htons(ETH_P_IP) == eth->h_proto)) {
const struct iphdr *ip =
*/
#define DRV_NAME "emac"
-#define DRV_VERSION "3.53"
+#define DRV_VERSION "3.54"
#define DRV_DESC "PPC 4xx OCP EMAC driver"
MODULE_DESCRIPTION(DRV_DESC);
#define PHY_POLL_LINK_ON HZ
#define PHY_POLL_LINK_OFF (HZ / 5)
+/* Graceful stop timeouts in us.
+ * We should allow up to 1 frame time (full-duplex, ignoring collisions)
+ */
+#define STOP_TIMEOUT_10 1230
+#define STOP_TIMEOUT_100 124
+#define STOP_TIMEOUT_1000 13
+#define STOP_TIMEOUT_1000_JUMBO 73
+
/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
"rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
r = in_be32(&p->mr0);
if (r & EMAC_MR0_TXE) {
- int n = 300;
+ int n = dev->stop_timeout;
out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
- while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n)
+ while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) {
+ udelay(1);
--n;
+ }
if (unlikely(!n))
emac_report_timeout_error(dev, "TX disable timeout");
}
if (!(r & EMAC_MR0_RXE)) {
if (unlikely(!(r & EMAC_MR0_RXI))) {
/* Wait if previous async disable is still in progress */
- int n = 100;
- while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ int n = dev->stop_timeout;
+ while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
+ udelay(1);
--n;
+ }
if (unlikely(!n))
emac_report_timeout_error(dev,
"RX disable timeout");
r = in_be32(&p->mr0);
if (r & EMAC_MR0_RXE) {
- int n = 300;
+ int n = dev->stop_timeout;
out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
- while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
+ udelay(1);
--n;
+ }
if (unlikely(!n))
emac_report_timeout_error(dev, "RX disable timeout");
}
r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
if (dev->phy.duplex == DUPLEX_FULL)
r |= EMAC_MR1_FDE;
+ dev->stop_timeout = STOP_TIMEOUT_10;
switch (dev->phy.speed) {
case SPEED_1000:
if (emac_phy_gpcs(dev->phy.mode)) {
r |= EMAC_MR1_MF_1000;
r |= EMAC_MR1_RFS_16K;
gige = 1;
-
- if (dev->ndev->mtu > ETH_DATA_LEN)
+
+ if (dev->ndev->mtu > ETH_DATA_LEN) {
r |= EMAC_MR1_JPSM;
+ dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
+ } else
+ dev->stop_timeout = STOP_TIMEOUT_1000;
break;
case SPEED_100:
r |= EMAC_MR1_MF_100;
+ dev->stop_timeout = STOP_TIMEOUT_100;
/* Fall through */
default:
r |= EMAC_MR1_RFS_4K;
dev->phy.duplex = DUPLEX_FULL;
dev->phy.autoneg = AUTONEG_DISABLE;
dev->phy.pause = dev->phy.asym_pause = 0;
+ dev->stop_timeout = STOP_TIMEOUT_100;
init_timer(&dev->link_timer);
dev->link_timer.function = emac_link_timer;
dev->link_timer.data = (unsigned long)dev;
struct timer_list link_timer;
int reset_failed;
+ int stop_timeout; /* in us */
+
struct ibm_emac_error_stats estats;
struct net_device_stats nstats;
}
jazz_sonic_device = platform_device_alloc(jazz_sonic_string, 0);
- if (!jazz_sonnic_device)
+ if (!jazz_sonic_device)
goto out_unregister;
if (platform_device_add(jazz_sonic_device)) {
return 0;
out_unregister:
- driver_unregister(&jazz_sonic_driver);
+ platform_driver_unregister(&jazz_sonic_driver);
return -ENOMEM;
}
-//
-// <COPYRIGHT CLASS="1B" YEAR="2005">
-// Unpublished work (c) MIPS Technologies, Inc. All rights reserved.
-// Unpublished rights reserved under the copyright laws of the U.S.A. and
-// other countries.
-//
-// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC.
-// FOR INTERNAL USE ONLY.
-//
-// Under no circumstances (contract or otherwise) may this information be
-// disclosed to, or copied, modified or used by anyone other than employees
-// or contractors of MIPS Technologies having a need to know.
-// </COPYRIGHT>
-//
-//++
-// File: MIPS_Net.h
-//
-// Description:
-// The definition of the emulated MIPSNET device's interface.
-//
-// Notes: This include file needs to work from a Linux device drivers.
-//
-//--
-//
-
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
#ifndef __MIPSNET_H
#define __MIPSNET_H
u_short tx_queue_len;
cardtype_t cardtype;
u_short sent;
- u_char mc_filter[8];
} local_info_t;
-#define MC_FILTERBREAK 8
+#define MC_FILTERBREAK 64
/*====================================================================*/
/*
for (i = 0; i < 6; i++)
outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
- /* Switch to bank 1 */
- if (lp->cardtype == MBH10302)
- outb(BANK_1, ioaddr + CONFIG_1);
- else
- outb(BANK_1U, ioaddr + CONFIG_1);
-
- /* set the multicast table to accept none. */
- for (i = 0; i < 8; i++)
- outb(0x00, ioaddr + MAR_ADR + i);
+ /* (re)initialize the multicast table */
+ set_rx_mode(dev);
/* Switch to bank 2 (runtime mode) */
if (lp->cardtype == MBH10302)
static void set_rx_mode(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
- struct local_info_t *lp = netdev_priv(dev);
u_char mc_filter[8]; /* Multicast hash filter */
u_long flags;
int i;
+ int saved_bank;
int saved_config_0 = inb(ioaddr + CONFIG_0);
local_irq_save(flags);
outb(2, ioaddr + RX_MODE); /* Use normal mode. */
}
- if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
- int saved_bank = inb(ioaddr + CONFIG_1);
- /* Switch to bank 1 and set the multicast table. */
- outb(0xe4, ioaddr + CONFIG_1);
- for (i = 0; i < 8; i++)
- outb(mc_filter[i], ioaddr + MAR_ADR + i);
- memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
- outb(saved_bank, ioaddr + CONFIG_1);
- }
+ /* Switch to bank 1 and set the multicast table. */
+ saved_bank = inb(ioaddr + CONFIG_1);
+ outb(0xe4, ioaddr + CONFIG_1);
+
+ for (i = 0; i < 8; i++)
+ outb(mc_filter[i], ioaddr + MAR_ADR + i);
+ outb(saved_bank, ioaddr + CONFIG_1);
outb(saved_config_0, ioaddr + CONFIG_0);
sktimer.o \
skvpd.o \
skxmac2.o \
- skproc.o \
- skcsum.o
+ skproc.o
# DBGDEF = \
# -DDEBUG
# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
-EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
+EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
clean:
rm -f core *.o *.a *.s
TX_PORT TxPort[SK_MAX_MACS][2];
RX_PORT RxPort[SK_MAX_MACS];
- unsigned int CsOfs1; /* for checksum calculation */
- unsigned int CsOfs2; /* for checksum calculation */
- SK_U32 CsOfs; /* for checksum calculation */
-
SK_BOOL CheckQueue; /* check event queue soon */
SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */
DIM_INFO DynIrqModInfo; /* all data related to DIM */
+++ /dev/null
-/******************************************************************************
- *
- * Name: skcsum.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.12 $
- * Date: $Date: 2003/08/20 13:55:53 $
- * Purpose: Store/verify Internet checksum in send/receive packets.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2003 SysKonnect GmbH.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifdef SK_USE_CSUM /* Check if CSUM is to be used. */
-
-#ifndef lint
-static const char SysKonnectFileId[] =
- "@(#) $Id: skcsum.c,v 1.12 2003/08/20 13:55:53 mschmid Exp $ (C) SysKonnect.";
-#endif /* !lint */
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the "GEnesis" common module "CSUM".
- *
- * This module contains the code necessary to calculate, store, and verify the
- * Internet Checksum of IP, TCP, and UDP frames.
- *
- * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
- * and is the code name of this SysKonnect project.
- *
- * Compilation Options:
- *
- * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
- * empty module.
- *
- * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
- * definitions. In this case, all SKCS_PROTO_xxx definitions must be made
- * external.
- *
- * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
- * definitions. In this case, all SKCS_STATUS_xxx definitions must be made
- * external.
- *
- * Include File Hierarchy:
- *
- * "h/skdrv1st.h"
- * "h/skcsum.h"
- * "h/sktypes.h"
- * "h/skqueue.h"
- * "h/skdrv2nd.h"
- *
- ******************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skcsum.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-/* The size of an Ethernet MAC header. */
-#define SKCS_ETHERNET_MAC_HEADER_SIZE (6+6+2)
-
-/* The size of the used topology's MAC header. */
-#define SKCS_MAC_HEADER_SIZE SKCS_ETHERNET_MAC_HEADER_SIZE
-
-/* The size of the IP header without any option fields. */
-#define SKCS_IP_HEADER_SIZE 20
-
-/*
- * Field offsets within the IP header.
- */
-
-/* "Internet Header Version" and "Length". */
-#define SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH 0
-
-/* "Total Length". */
-#define SKCS_OFS_IP_TOTAL_LENGTH 2
-
-/* "Flags" "Fragment Offset". */
-#define SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET 6
-
-/* "Next Level Protocol" identifier. */
-#define SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL 9
-
-/* Source IP address. */
-#define SKCS_OFS_IP_SOURCE_ADDRESS 12
-
-/* Destination IP address. */
-#define SKCS_OFS_IP_DESTINATION_ADDRESS 16
-
-
-/*
- * Field offsets within the UDP header.
- */
-
-/* UDP checksum. */
-#define SKCS_OFS_UDP_CHECKSUM 6
-
-/* IP "Next Level Protocol" identifiers (see RFC 790). */
-#define SKCS_PROTO_ID_TCP 6 /* Transport Control Protocol */
-#define SKCS_PROTO_ID_UDP 17 /* User Datagram Protocol */
-
-/* IP "Don't Fragment" bit. */
-#define SKCS_IP_DONT_FRAGMENT SKCS_HTON16(0x4000)
-
-/* Add a byte offset to a pointer. */
-#define SKCS_IDX(pPtr, Ofs) ((void *) ((char *) (pPtr) + (Ofs)))
-
-/*
- * Macros that convert host to network representation and vice versa, i.e.
- * little/big endian conversion on little endian machines only.
- */
-#ifdef SK_LITTLE_ENDIAN
-#define SKCS_HTON16(Val16) (((unsigned) (Val16) >> 8) | (((Val16) & 0xff) << 8))
-#endif /* SK_LITTLE_ENDIAN */
-#ifdef SK_BIG_ENDIAN
-#define SKCS_HTON16(Val16) (Val16)
-#endif /* SK_BIG_ENDIAN */
-#define SKCS_NTOH16(Val16) SKCS_HTON16(Val16)
-
-/* typedefs *******************************************************************/
-
-/* function prototypes ********************************************************/
-
-/******************************************************************************
- *
- * SkCsGetSendInfo - get checksum information for a send packet
- *
- * Description:
- * Get all checksum information necessary to send a TCP or UDP packet. The
- * function checks the IP header passed to it. If the high-level protocol
- * is either TCP or UDP the pseudo header checksum is calculated and
- * returned.
- *
- * The function returns the total length of the IP header (including any
- * IP option fields), which is the same as the start offset of the IP data
- * which in turn is the start offset of the TCP or UDP header.
- *
- * The function also returns the TCP or UDP pseudo header checksum, which
- * should be used as the start value for the hardware checksum calculation.
- * (Note that any actual pseudo header checksum can never calculate to
- * zero.)
- *
- * Note:
- * There is a bug in the GENESIS ASIC which may lead to wrong checksums.
- *
- * Arguments:
- * pAc - A pointer to the adapter context struct.
- *
- * pIpHeader - Pointer to IP header. Must be at least the IP header *not*
- * including any option fields, i.e. at least 20 bytes.
- *
- * Note: This pointer will be used to address 8-, 16-, and 32-bit
- * variables with the respective alignment offsets relative to the pointer.
- * Thus, the pointer should point to a 32-bit aligned address. If the
- * target system cannot address 32-bit variables on non 32-bit aligned
- * addresses, then the pointer *must* point to a 32-bit aligned address.
- *
- * pPacketInfo - A pointer to the packet information structure for this
- * packet. Before calling this SkCsGetSendInfo(), the following field must
- * be initialized:
- *
- * ProtocolFlags - Initialize with any combination of
- * SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on
- * the protocols specified here. Any protocol(s) not specified
- * here will be ignored.
- *
- * Note: Only one checksum can be calculated in hardware. Thus, if
- * SKCS_PROTO_IP is specified in the 'ProtocolFlags',
- * SkCsGetSendInfo() must calculate the IP header checksum in
- * software. It might be a better idea to have the calling
- * protocol stack calculate the IP header checksum.
- *
- * Returns: N/A
- * On return, the following fields in 'pPacketInfo' may or may not have
- * been filled with information, depending on the protocol(s) found in the
- * packet:
- *
- * ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s)
- * that were both requested by the caller and actually found in the packet.
- * Protocol(s) not specified by the caller and/or not found in the packet
- * will have their respective SKCS_PROTO_XXX bit flags reset.
- *
- * Note: For IP fragments, TCP and UDP packet information is ignored.
- *
- * IpHeaderLength - The total length in bytes of the complete IP header
- * including any option fields is returned here. This is the start offset
- * of the IP data, i.e. the TCP or UDP header if present.
- *
- * IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the
- * 16-bit Internet Checksum of the IP header is returned here. This value
- * is to be stored into the packet's 'IP Header Checksum' field.
- *
- * PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP
- * has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum
- * of the TCP or UDP pseudo header is returned here.
- */
-void SkCsGetSendInfo(
-SK_AC *pAc, /* Adapter context struct. */
-void *pIpHeader, /* IP header. */
-SKCS_PACKET_INFO *pPacketInfo, /* Packet information struct. */
-int NetNumber) /* Net number */
-{
- /* Internet Header Version found in IP header. */
- unsigned InternetHeaderVersion;
-
- /* Length of the IP header as found in IP header. */
- unsigned IpHeaderLength;
-
- /* Bit field specifiying the desired/found protocols. */
- unsigned ProtocolFlags;
-
- /* Next level protocol identifier found in IP header. */
- unsigned NextLevelProtocol;
-
- /* Length of IP data portion. */
- unsigned IpDataLength;
-
- /* TCP/UDP pseudo header checksum. */
- unsigned long PseudoHeaderChecksum;
-
- /* Pointer to next level protocol statistics structure. */
- SKCS_PROTO_STATS *NextLevelProtoStats;
-
- /* Temporary variable. */
- unsigned Tmp;
-
- Tmp = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
-
- /* Get the Internet Header Version (IHV). */
- /* Note: The IHV is stored in the upper four bits. */
-
- InternetHeaderVersion = Tmp >> 4;
-
- /* Check the Internet Header Version. */
- /* Note: We currently only support IP version 4. */
-
- if (InternetHeaderVersion != 4) { /* IPv4? */
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Unknown Internet Header Version %u.\n",
- InternetHeaderVersion));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* Get the IP header length (IHL). */
- /*
- * Note: The IHL is stored in the lower four bits as the number of
- * 4-byte words.
- */
-
- IpHeaderLength = (Tmp & 0xf) * 4;
- pPacketInfo->IpHeaderLength = IpHeaderLength;
-
- /* Check the IP header length. */
-
- /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
-
- if (IpHeaderLength < 5*4) {
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Invalid IP Header Length %u.\n", IpHeaderLength));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* This is an IPv4 frame with a header of valid length. */
-
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxOkCts++;
-
- /* Check if we should calculate the IP header checksum. */
-
- ProtocolFlags = pPacketInfo->ProtocolFlags;
-
- if (ProtocolFlags & SKCS_PROTO_IP) {
- pPacketInfo->IpHeaderChecksum =
- SkCsCalculateChecksum(pIpHeader, IpHeaderLength);
- }
-
- /* Get the next level protocol identifier. */
-
- NextLevelProtocol =
- *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
-
- /*
- * Check if this is a TCP or UDP frame and if we should calculate the
- * TCP/UDP pseudo header checksum.
- *
- * Also clear all protocol bit flags of protocols not present in the
- * frame.
- */
-
- if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- /* TCP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
- }
- else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- /* UDP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
- }
- else {
- /*
- * Either not a TCP or UDP frame and/or TCP/UDP processing not
- * specified.
- */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- return;
- }
-
- /* Check if this is an IP fragment. */
-
- /*
- * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
- * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
- * and the "More Fragments" are zero, it is *not* a fragment. We can
- * easily check both at the same time since they are in the same 16-bit
- * word.
- */
-
- if ((*(SK_U16 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
- ~SKCS_IP_DONT_FRAGMENT) != 0) {
- /* IP fragment; ignore all other protocols. */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- NextLevelProtoStats->TxUnableCts++;
- return;
- }
-
- /*
- * Calculate the TCP/UDP pseudo header checksum.
- */
-
- /* Get total length of IP header and data. */
-
- IpDataLength =
- *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
-
- /* Get length of IP data portion. */
-
- IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
-
- /* Calculate the sum of all pseudo header fields (16-bit). */
-
- PseudoHeaderChecksum =
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
- (unsigned long) SKCS_HTON16(NextLevelProtocol) +
- (unsigned long) SKCS_HTON16(IpDataLength);
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- pPacketInfo->ProtocolFlags = ProtocolFlags;
- NextLevelProtoStats->TxOkCts++; /* Success. */
-} /* SkCsGetSendInfo */
-
-
-/******************************************************************************
- *
- * SkCsGetReceiveInfo - verify checksum information for a received packet
- *
- * Description:
- * Verify a received frame's checksum. The function returns a status code
- * reflecting the result of the verification.
- *
- * Note:
- * Before calling this function you have to verify that the frame is
- * not padded and Checksum1 and Checksum2 are bigger than 1.
- *
- * Arguments:
- * pAc - Pointer to adapter context struct.
- *
- * pIpHeader - Pointer to IP header. Must be at least the length in bytes
- * of the received IP header including any option fields. For UDP packets,
- * 8 additional bytes are needed to access the UDP checksum.
- *
- * Note: The actual length of the IP header is stored in the lower four
- * bits of the first octet of the IP header as the number of 4-byte words,
- * so it must be multiplied by four to get the length in bytes. Thus, the
- * maximum IP header length is 15 * 4 = 60 bytes.
- *
- * Checksum1 - The first 16-bit Internet Checksum calculated by the
- * hardware starting at the offset returned by SkCsSetReceiveFlags().
- *
- * Checksum2 - The second 16-bit Internet Checksum calculated by the
- * hardware starting at the offset returned by SkCsSetReceiveFlags().
- *
- * Returns:
- * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
- * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
- * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
- * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
- * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
- * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
- * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
- * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
- * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
- * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
- *
- * Note: If SKCS_OVERWRITE_STATUS is defined, the SKCS_STATUS_XXX values
- * returned here can be defined in some header file by the module using CSUM.
- * In this way, the calling module can assign return values for its own needs,
- * e.g. by assigning bit flags to the individual protocols.
- */
-SKCS_STATUS SkCsGetReceiveInfo(
-SK_AC *pAc, /* Adapter context struct. */
-void *pIpHeader, /* IP header. */
-unsigned Checksum1, /* Hardware checksum 1. */
-unsigned Checksum2, /* Hardware checksum 2. */
-int NetNumber) /* Net number */
-{
- /* Internet Header Version found in IP header. */
- unsigned InternetHeaderVersion;
-
- /* Length of the IP header as found in IP header. */
- unsigned IpHeaderLength;
-
- /* Length of IP data portion. */
- unsigned IpDataLength;
-
- /* IP header checksum. */
- unsigned IpHeaderChecksum;
-
- /* IP header options checksum, if any. */
- unsigned IpOptionsChecksum;
-
- /* IP data checksum, i.e. TCP/UDP checksum. */
- unsigned IpDataChecksum;
-
- /* Next level protocol identifier found in IP header. */
- unsigned NextLevelProtocol;
-
- /* The checksum of the "next level protocol", i.e. TCP or UDP. */
- unsigned long NextLevelProtocolChecksum;
-
- /* Pointer to next level protocol statistics structure. */
- SKCS_PROTO_STATS *NextLevelProtoStats;
-
- /* Temporary variable. */
- unsigned Tmp;
-
- Tmp = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
-
- /* Get the Internet Header Version (IHV). */
- /* Note: The IHV is stored in the upper four bits. */
-
- InternetHeaderVersion = Tmp >> 4;
-
- /* Check the Internet Header Version. */
- /* Note: We currently only support IP version 4. */
-
- if (InternetHeaderVersion != 4) { /* IPv4? */
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
- ("Rx: Unknown Internet Header Version %u.\n",
- InternetHeaderVersion));
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxUnableCts++;
- return (SKCS_STATUS_UNKNOWN_IP_VERSION);
- }
-
- /* Get the IP header length (IHL). */
- /*
- * Note: The IHL is stored in the lower four bits as the number of
- * 4-byte words.
- */
-
- IpHeaderLength = (Tmp & 0xf) * 4;
-
- /* Check the IP header length. */
-
- /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
-
- if (IpHeaderLength < 5*4) {
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
- ("Rx: Invalid IP Header Length %u.\n", IpHeaderLength));
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
- return (SKCS_STATUS_IP_CSUM_ERROR);
- }
-
- /* This is an IPv4 frame with a header of valid length. */
-
- /* Get the IP header and data checksum. */
-
- IpDataChecksum = Checksum2;
-
- /*
- * The IP header checksum is calculated as follows:
- *
- * IpHeaderChecksum = Checksum1 - Checksum2
- */
-
- SKCS_OC_SUB(IpHeaderChecksum, Checksum1, Checksum2);
-
- /* Check if any IP header options. */
-
- if (IpHeaderLength > SKCS_IP_HEADER_SIZE) {
-
- /* Get the IP options checksum. */
-
- IpOptionsChecksum = SkCsCalculateChecksum(
- SKCS_IDX(pIpHeader, SKCS_IP_HEADER_SIZE),
- IpHeaderLength - SKCS_IP_HEADER_SIZE);
-
- /* Adjust the IP header and IP data checksums. */
-
- SKCS_OC_ADD(IpHeaderChecksum, IpHeaderChecksum, IpOptionsChecksum);
-
- SKCS_OC_SUB(IpDataChecksum, IpDataChecksum, IpOptionsChecksum);
- }
-
- /*
- * Check if the IP header checksum is ok.
- *
- * NOTE: We must check the IP header checksum even if the caller just wants
- * us to check upper-layer checksums, because we cannot do any further
- * processing of the packet without a valid IP checksum.
- */
-
- /* Get the next level protocol identifier. */
-
- NextLevelProtocol = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
-
- if (IpHeaderChecksum != 0xffff) {
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
- /* the NDIS tester wants to know the upper level protocol too */
- if (NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- return(SKCS_STATUS_IP_CSUM_ERROR_TCP);
- }
- else if (NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- return(SKCS_STATUS_IP_CSUM_ERROR_UDP);
- }
- return (SKCS_STATUS_IP_CSUM_ERROR);
- }
-
- /*
- * Check if this is a TCP or UDP frame and if we should calculate the
- * TCP/UDP pseudo header checksum.
- *
- * Also clear all protocol bit flags of protocols not present in the
- * frame.
- */
-
- if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_TCP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- /* TCP/IP frame. */
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
- }
- else if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_UDP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- /* UDP/IP frame. */
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
- }
- else {
- /*
- * Either not a TCP or UDP frame and/or TCP/UDP processing not
- * specified.
- */
- return (SKCS_STATUS_IP_CSUM_OK);
- }
-
- /* Check if this is an IP fragment. */
-
- /*
- * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
- * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
- * and the "More Fragments" are zero, it is *not* a fragment. We can
- * easily check both at the same time since they are in the same 16-bit
- * word.
- */
-
- if ((*(SK_U16 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
- ~SKCS_IP_DONT_FRAGMENT) != 0) {
- /* IP fragment; ignore all other protocols. */
- NextLevelProtoStats->RxUnableCts++;
- return (SKCS_STATUS_IP_FRAGMENT);
- }
-
- /*
- * 08-May-2000 ra
- *
- * From RFC 768 (UDP)
- * If the computed checksum is zero, it is transmitted as all ones (the
- * equivalent in one's complement arithmetic). An all zero transmitted
- * checksum value means that the transmitter generated no checksum (for
- * debugging or for higher level protocols that don't care).
- */
-
- if (NextLevelProtocol == SKCS_PROTO_ID_UDP &&
- *(SK_U16*)SKCS_IDX(pIpHeader, IpHeaderLength + 6) == 0x0000) {
-
- NextLevelProtoStats->RxOkCts++;
-
- return (SKCS_STATUS_IP_CSUM_OK_NO_UDP);
- }
-
- /*
- * Calculate the TCP/UDP checksum.
- */
-
- /* Get total length of IP header and data. */
-
- IpDataLength =
- *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
-
- /* Get length of IP data portion. */
-
- IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
-
- NextLevelProtocolChecksum =
-
- /* Calculate the pseudo header checksum. */
-
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
- (unsigned long) SKCS_HTON16(NextLevelProtocol) +
- (unsigned long) SKCS_HTON16(IpDataLength) +
-
- /* Add the TCP/UDP header checksum. */
-
- (unsigned long) IpDataChecksum;
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
-
- /* Check if the TCP/UDP checksum is ok. */
-
- if ((unsigned) NextLevelProtocolChecksum == 0xffff) {
-
- /* TCP/UDP checksum ok. */
-
- NextLevelProtoStats->RxOkCts++;
-
- return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
- SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK);
- }
-
- /* TCP/UDP checksum error. */
-
- NextLevelProtoStats->RxErrCts++;
-
- return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
- SKCS_STATUS_TCP_CSUM_ERROR : SKCS_STATUS_UDP_CSUM_ERROR);
-} /* SkCsGetReceiveInfo */
-
-
-/******************************************************************************
- *
- * SkCsSetReceiveFlags - set checksum receive flags
- *
- * Description:
- * Use this function to set the various receive flags. According to the
- * protocol flags set by the caller, the start offsets within received
- * packets of the two hardware checksums are returned. These offsets must
- * be stored in all receive descriptors.
- *
- * Arguments:
- * pAc - Pointer to adapter context struct.
- *
- * ReceiveFlags - Any combination of SK_PROTO_XXX flags of the protocols
- * for which the caller wants checksum information on received frames.
- *
- * pChecksum1Offset - The start offset of the first receive descriptor
- * hardware checksum to be calculated for received frames is returned
- * here.
- *
- * pChecksum2Offset - The start offset of the second receive descriptor
- * hardware checksum to be calculated for received frames is returned
- * here.
- *
- * Returns: N/A
- * Returns the two hardware checksum start offsets.
- */
-void SkCsSetReceiveFlags(
-SK_AC *pAc, /* Adapter context struct. */
-unsigned ReceiveFlags, /* New receive flags. */
-unsigned *pChecksum1Offset, /* Offset for hardware checksum 1. */
-unsigned *pChecksum2Offset, /* Offset for hardware checksum 2. */
-int NetNumber)
-{
- /* Save the receive flags. */
-
- pAc->Csum.ReceiveFlags[NetNumber] = ReceiveFlags;
-
- /* First checksum start offset is the IP header. */
- *pChecksum1Offset = SKCS_MAC_HEADER_SIZE;
-
- /*
- * Second checksum start offset is the IP data. Note that this may vary
- * if there are any IP header options in the actual packet.
- */
- *pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE;
-} /* SkCsSetReceiveFlags */
-
-#ifndef SK_CS_CALCULATE_CHECKSUM
-
-/******************************************************************************
- *
- * SkCsCalculateChecksum - calculate checksum for specified data
- *
- * Description:
- * Calculate and return the 16-bit Internet Checksum for the specified
- * data.
- *
- * Arguments:
- * pData - Pointer to data for which the checksum shall be calculated.
- * Note: The pointer should be aligned on a 16-bit boundary.
- *
- * Length - Length in bytes of data to checksum.
- *
- * Returns:
- * The 16-bit Internet Checksum for the specified data.
- *
- * Note: The checksum is calculated in the machine's natural byte order,
- * i.e. little vs. big endian. Thus, the resulting checksum is different
- * for the same input data on little and big endian machines.
- *
- * However, when written back to the network packet, the byte order is
- * always in correct network order.
- */
-unsigned SkCsCalculateChecksum(
-void *pData, /* Data to checksum. */
-unsigned Length) /* Length of data. */
-{
- SK_U16 *pU16; /* Pointer to the data as 16-bit words. */
- unsigned long Checksum; /* Checksum; must be at least 32 bits. */
-
- /* Sum up all 16-bit words. */
-
- pU16 = (SK_U16 *) pData;
- for (Checksum = 0; Length > 1; Length -= 2) {
- Checksum += *pU16++;
- }
-
- /* If this is an odd number of bytes, add-in the last byte. */
-
- if (Length > 0) {
-#ifdef SK_BIG_ENDIAN
- /* Add the last byte as the high byte. */
- Checksum += ((unsigned) *(SK_U8 *) pU16) << 8;
-#else /* !SK_BIG_ENDIAN */
- /* Add the last byte as the low byte. */
- Checksum += *(SK_U8 *) pU16;
-#endif /* !SK_BIG_ENDIAN */
- }
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(Checksum, Checksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(Checksum, Checksum, 0);
-
- /* Note: All bits beyond the 16-bit limit are now zero. */
-
- return ((unsigned) Checksum);
-} /* SkCsCalculateChecksum */
-
-#endif /* SK_CS_CALCULATE_CHECKSUM */
-
-/******************************************************************************
- *
- * SkCsEvent - the CSUM event dispatcher
- *
- * Description:
- * This is the event handler for the CSUM module.
- *
- * Arguments:
- * pAc - Pointer to adapter context.
- *
- * Ioc - I/O context.
- *
- * Event - Event id.
- *
- * Param - Event dependent parameter.
- *
- * Returns:
- * The 16-bit Internet Checksum for the specified data.
- *
- * Note: The checksum is calculated in the machine's natural byte order,
- * i.e. little vs. big endian. Thus, the resulting checksum is different
- * for the same input data on little and big endian machines.
- *
- * However, when written back to the network packet, the byte order is
- * always in correct network order.
- */
-int SkCsEvent(
-SK_AC *pAc, /* Pointer to adapter context. */
-SK_IOC Ioc, /* I/O context. */
-SK_U32 Event, /* Event id. */
-SK_EVPARA Param) /* Event dependent parameter. */
-{
- int ProtoIndex;
- int NetNumber;
-
- switch (Event) {
- /*
- * Clear protocol statistics.
- *
- * Param - Protocol index, or -1 for all protocols.
- * - Net number.
- */
- case SK_CSUM_EVENT_CLEAR_PROTO_STATS:
-
- ProtoIndex = (int)Param.Para32[1];
- NetNumber = (int)Param.Para32[0];
- if (ProtoIndex < 0) { /* Clear for all protocols. */
- if (NetNumber >= 0) {
- SK_MEMSET(&pAc->Csum.ProtoStats[NetNumber][0], 0,
- sizeof(pAc->Csum.ProtoStats[NetNumber]));
- }
- }
- else { /* Clear for individual protocol. */
- SK_MEMSET(&pAc->Csum.ProtoStats[NetNumber][ProtoIndex], 0,
- sizeof(pAc->Csum.ProtoStats[NetNumber][ProtoIndex]));
- }
- break;
- default:
- break;
- }
- return (0); /* Success. */
-} /* SkCsEvent */
-
-#endif /* SK_USE_CSUM */
.phys_id = locateDevice,
.get_pauseparam = getPauseParams,
.set_pauseparam = setPauseParams,
+ .get_link = ethtool_op_get_link,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
* "h/skgeinit.h"
* "h/skaddr.h"
* "h/skgesirq.h"
- * "h/skcsum.h"
* "h/skrlmt.h"
*
******************************************************************************/
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
+#include <linux/ip.h>
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
return(-EAGAIN);
}
- SkCsSetReceiveFlags(pAC,
- SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP,
- &pAC->CsOfs1, &pAC->CsOfs2, 0);
- pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1;
-
BoardInitMem(pAC);
/* tschilling: New common function with minimum size check. */
DualNet = SK_FALSE;
/* set the pointers right */
pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
pDescr->pNextRxd = pNextDescr;
- pDescr->TcpSumStarts = pAC->CsOfs;
+ pDescr->TcpSumStarts = 0;
/* advance one step */
pPrevDescr = pDescr;
TXD *pOldTxd;
unsigned long Flags;
SK_U64 PhysAddr;
- int Protocol;
- int IpHeaderLength;
int BytesSend = pMessage->len;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X"));
pTxd->pMBuf = pMessage;
if (pMessage->ip_summed == CHECKSUM_HW) {
- Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff);
- if ((Protocol == C_PROTO_ID_UDP) &&
+ u16 hdrlen = pMessage->h.raw - pMessage->data;
+ u16 offset = hdrlen + pMessage->csum;
+
+ if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) &&
(pAC->GIni.GIChipRev == 0) &&
(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
pTxd->TBControl = BMU_TCP_CHECK;
pTxd->TBControl = BMU_UDP_CHECK;
}
- IpHeaderLength = (SK_U8)pMessage->data[C_OFFSET_IPHEADER];
- IpHeaderLength = (IpHeaderLength & 0xf) * 4;
- pTxd->TcpSumOfs = 0; /* PH-Checksum already calculated */
- pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength +
- (Protocol == C_PROTO_ID_UDP ?
- C_OFFSET_UDPHEADER_UDPCS :
- C_OFFSET_TCPHEADER_TCPCS);
- pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength;
+ pTxd->TcpSumOfs = 0;
+ pTxd->TcpSumSt = hdrlen;
+ pTxd->TcpSumWr = offset;
pTxd->TBControl |= BMU_OWN | BMU_STF |
BMU_SW | BMU_EOF |
TXD *pTxdLst;
int CurrFrag;
int BytesSend;
- int IpHeaderLength;
- int Protocol;
skb_frag_t *sk_frag;
SK_U64 PhysAddr;
unsigned long Flags;
+ SK_U32 Control;
spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
#ifndef USE_TX_COMPLETE
pTxdFst = pTxd;
pTxdLst = pTxd;
BytesSend = 0;
- Protocol = 0;
/*
** Map the first fragment (header) into the DMA-space
** Does the HW need to evaluate checksum for TCP or UDP packets?
*/
if (pMessage->ip_summed == CHECKSUM_HW) {
- pTxd->TBControl = BMU_STF | BMU_STFWD | skb_headlen(pMessage);
+ u16 hdrlen = pMessage->h.raw - pMessage->data;
+ u16 offset = hdrlen + pMessage->csum;
+
+ Control = BMU_STFWD;
+
/*
** We have to use the opcode for tcp here, because the
** opcode for udp is not working in the hardware yet
** (Revision 2.0)
*/
- Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff);
- if ((Protocol == C_PROTO_ID_UDP) &&
+ if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) &&
(pAC->GIni.GIChipRev == 0) &&
(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
- pTxd->TBControl |= BMU_TCP_CHECK;
+ Control |= BMU_TCP_CHECK;
} else {
- pTxd->TBControl |= BMU_UDP_CHECK;
+ Control |= BMU_UDP_CHECK;
}
- IpHeaderLength = ((SK_U8)pMessage->data[C_OFFSET_IPHEADER] & 0xf)*4;
- pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */
- pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength +
- (Protocol == C_PROTO_ID_UDP ?
- C_OFFSET_UDPHEADER_UDPCS :
- C_OFFSET_TCPHEADER_TCPCS);
- pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength;
- } else {
- pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_STF |
- skb_headlen(pMessage);
- }
+ pTxd->TcpSumOfs = 0;
+ pTxd->TcpSumSt = hdrlen;
+ pTxd->TcpSumWr = offset;
+ } else
+ Control = BMU_CHECK | BMU_SW;
+
+ pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage);
pTxd = pTxd->pNextTxd;
pTxPort->TxdRingFree--;
pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
pTxd->pMBuf = pMessage;
- /*
- ** Does the HW need to evaluate checksum for TCP or UDP packets?
- */
- if (pMessage->ip_summed == CHECKSUM_HW) {
- pTxd->TBControl = BMU_OWN | BMU_SW | BMU_STFWD;
- /*
- ** We have to use the opcode for tcp here because the
- ** opcode for udp is not working in the hardware yet
- ** (revision 2.0)
- */
- if ((Protocol == C_PROTO_ID_UDP) &&
- (pAC->GIni.GIChipRev == 0) &&
- (pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
- pTxd->TBControl |= BMU_TCP_CHECK;
- } else {
- pTxd->TBControl |= BMU_UDP_CHECK;
- }
- } else {
- pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_OWN;
- }
+ pTxd->TBControl = Control | BMU_OWN | sk_frag->size;;
/*
** Do we have the last fragment?
*/
if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) {
#ifdef USE_TX_COMPLETE
- pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF | sk_frag->size;
+ pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF;
#else
- pTxd->TBControl |= BMU_EOF | sk_frag->size;
+ pTxd->TBControl |= BMU_EOF;
#endif
pTxdFst->TBControl |= BMU_OWN | BMU_SW;
-
- } else {
- pTxd->TBControl |= sk_frag->size;
}
pTxdLst = pTxd;
pTxd = pTxd->pNextTxd;
struct sk_buff *pMsg; /* pointer to message holding frame */
struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */
int FrameLength; /* total length of received frame */
-int IpFrameLength;
SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */
SK_EVPARA EvPara; /* an event parameter union */
unsigned long Flags; /* for spin lock */
SK_BOOL IsBadFrame; /* Bad frame */
SK_U32 FrameStat;
-unsigned short Csum1;
-unsigned short Csum2;
-unsigned short Type;
-int Result;
SK_U64 PhysAddr;
rx_start:
(dma_addr_t) PhysAddr,
FrameLength,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(pNewMsg, pMsg->data,
- FrameLength, 0);
+ memcpy(pNewMsg->data, pMsg, FrameLength);
+
pci_dma_sync_single_for_device(pAC->PciDev,
(dma_addr_t) PhysAddr,
FrameLength,
/* set length in message */
skb_put(pMsg, FrameLength);
- /* hardware checksum */
- Type = ntohs(*((short*)&pMsg->data[12]));
+ } /* frame > SK_COPY_TRESHOLD */
#ifdef USE_SK_RX_CHECKSUM
- if (Type == 0x800) {
- Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff);
- Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff);
- IpFrameLength = (int) ntohs((unsigned short)
- ((unsigned short *) pMsg->data)[8]);
-
- /*
- * Test: If frame is padded, a check is not possible!
- * Frame not padded? Length difference must be 14 (0xe)!
- */
- if ((FrameLength - IpFrameLength) != 0xe) {
- /* Frame padded => TCP offload not possible! */
- pMsg->ip_summed = CHECKSUM_NONE;
- } else {
- /* Frame not padded => TCP offload! */
- if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) &&
- (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) ||
- (pAC->ChipsetType)) {
- Result = SkCsGetReceiveInfo(pAC,
- &pMsg->data[14],
- Csum1, Csum2, pRxPort->PortIndex);
- if (Result ==
- SKCS_STATUS_IP_FRAGMENT ||
- Result ==
- SKCS_STATUS_IP_CSUM_OK ||
- Result ==
- SKCS_STATUS_TCP_CSUM_OK ||
- Result ==
- SKCS_STATUS_UDP_CSUM_OK) {
- pMsg->ip_summed =
- CHECKSUM_UNNECESSARY;
- }
- else if (Result ==
- SKCS_STATUS_TCP_CSUM_ERROR ||
- Result ==
- SKCS_STATUS_UDP_CSUM_ERROR ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR_UDP ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR_TCP ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR ) {
- /* HW Checksum error */
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
- SK_DBGCAT_DRV_RX_PROGRESS,
- ("skge: CRC error. Frame dropped!\n"));
- goto rx_failed;
- } else {
- pMsg->ip_summed =
- CHECKSUM_NONE;
- }
- }/* checksumControl calculation valid */
- } /* Frame length check */
- } /* IP frame */
+ pMsg->csum = pRxd->TcpSums;
+ pMsg->ip_summed = CHECKSUM_HW;
#else
- pMsg->ip_summed = CHECKSUM_NONE;
+ pMsg->ip_summed = CHECKSUM_NONE;
#endif
- } /* frame > SK_COPY_TRESHOLD */
-
+
+
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V"));
ForRlmt = SK_RLMT_RX_PROTOCOL;
#if 0
dev->irq = pdev->irq;
error = SkGeInitPCI(pAC);
if (error) {
- printk("SKGE: PCI setup failed: %i\n", error);
+ printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
goto out_free_netdev;
}
/* Register net device */
if (register_netdev(dev)) {
- printk(KERN_ERR "SKGE: Could not register device.\n");
+ printk(KERN_ERR "sk98lin: Could not register device.\n");
goto out_free_resources;
}
SkGeYellowLED(pAC, pAC->IoBase, 1);
-
memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
SkGeProcCreate(dev);
#endif
if (register_netdev(dev)) {
- printk(KERN_ERR "SKGE: Could not register device.\n");
+ printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n");
free_netdev(dev);
pAC->dev[1] = pAC->dev[0];
} else {
SkGeProcCreate(dev);
memcpy(&dev->dev_addr,
&pAC->Addr.Net[1].CurrentMacAddress, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
printk("%s: %s\n", dev->name, pAC->DeviceStr);
printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
td->dma_hi = map >> 32;
if (skb->ip_summed == CHECKSUM_HW) {
- const struct iphdr *ip
- = (const struct iphdr *) (skb->data + ETH_HLEN);
int offset = skb->h.raw - skb->data;
/* This seems backwards, but it is what the sk98lin
* does. Looks like hardware is wrong?
*/
- if (ip->protocol == IPPROTO_UDP
+ if (skb->h.ipiph->protocol == IPPROTO_UDP
&& hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
control = BMU_TCP_CHECK;
else
SET_NETDEV_DEV(dev, dmdev);
- if (test_bit(FLAG_MPI,&ai->flags))
- reset_card (dev, 1);
+ reset_card (dev, 1);
+ msleep(400);
rc = request_irq( dev->irq, airo_interrupt, SA_SHIRQ, dev->name, dev );
if (rc) {
break;
default:
err = -EINVAL;
- }
- if (err)
goto out;
+ }
if (prq->flags & IW_POWER_TIMEOUT) {
priv->pm_on = 1;
#ifndef CONFIG_PLAT_USRV
/* insert interrupt */
request_irq(irq, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
+#ifndef CONFIG_PLAT_MAPPI3
/* eject interrupt */
request_irq(irq+1, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
-
+#endif
debug(3, "m32r_cfc: enable CFMSK, RDYSEL\n");
pcc_set(pcc_sockets, (unsigned int)PLD_CFIMASK, 0x01);
#endif /* CONFIG_PLAT_USRV */
spin_lock_irqsave(&adapter->lock, flags);
scb = mega_build_cmd(adapter, scmd, &busy);
+ if (!scb)
+ goto out;
- if(scb) {
- scb->state |= SCB_PENDQ;
- list_add_tail(&scb->list, &adapter->pending_list);
+ scb->state |= SCB_PENDQ;
+ list_add_tail(&scb->list, &adapter->pending_list);
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
- return 0;
- }
- spin_unlock_irqrestore(&adapter->lock, flags);
+ /*
+ * Check if the HBA is in quiescent state, e.g., during a
+ * delete logical drive opertion. If it is, don't run
+ * the pending_list.
+ */
+ if (atomic_read(&adapter->quiescent) == 0)
+ mega_runpendq(adapter);
+ busy = 0;
+ out:
+ spin_unlock_irqrestore(&adapter->lock, flags);
return busy;
}
adapter->flag = flag;
spin_lock_init(&adapter->lock);
- scsi_assign_lock(host, &adapter->lock);
host->cmd_per_lun = max_cmd_per_lun;
host->max_sectors = max_sectors_per_io;
#define SERIAL_PORT_DFNS
#endif
-static struct old_serial_port old_serial_port[] = {
+static const struct old_serial_port old_serial_port[] = {
SERIAL_PORT_DFNS /* defined in asm/serial.h */
};
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
};
-static struct timedia_struct {
+static const struct timedia_struct {
int num;
unsigned short *ids;
} timedia_data[] = {
unsigned int cflag;
};
-static struct baud_rates baud_rates[] = {
+static const struct baud_rates baud_rates[] = {
{ 921600, B921600 },
{ 460800, B460800 },
{ 230400, B230400 },
int multi; /* 1 = multifunction, > 1 = # ports */
};
-static struct multi_id multi_id[] = {
+static const struct multi_id multi_id[] = {
{ MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
static int simple_config(dev_link_t *link)
{
- static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- static int size_table[2] = { 8, 16 };
+ static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static const int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
{ /* V = Conexant P = ADSL modem (Hasbani project) */
USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
},
+ { /* V = Conexant P = ADSL modem (Well PTI-800 */
+ USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
+ },
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
},
fail:
instance->atm_dev = NULL;
- shutdown_atm_dev(atm_dev); /* usbatm_atm_dev_close will eventually be called */
+ atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
}
/* ATM finalize */
if (instance->atm_dev)
- shutdown_atm_dev(instance->atm_dev);
+ atm_dev_deregister(instance->atm_dev);
usbatm_put_instance(instance); /* taken in usbatm_usb_probe */
}
goto done;
}
}
+ synchronize_irq(dev->irq);
/* FIXME until the generic PM interfaces change a lot more, this
* can't use PCI D1 and D2 states. For example, the confusion
dev->dev.power.power_state = PMSG_ON;
- hcd->saw_irq = 0;
+ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
if (hcd->driver->resume) {
retval = hcd->driver->resume(hcd);
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags)
+ && hcd->self.root_hub != urb->dev) {
dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
"Controller is probably using the wrong IRQ."
"\n");
- hcd->saw_irq = 1;
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
urb->status = status;
struct usb_hcd *hcd = __hcd;
int start = hcd->state;
- if (start == HC_STATE_HALT)
+ if (unlikely(start == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
return IRQ_NONE;
if (hcd->driver->irq (hcd, r) == IRQ_NONE)
return IRQ_NONE;
- hcd->saw_irq = 1;
- if (hcd->state == HC_STATE_HALT)
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
usb_hc_died (hcd);
return IRQ_HANDLED;
}
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
/* till now HC has been in an indeterminate state ... */
if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
dev_err(hcd->self.controller, "can't reset\n");
* hardware info/state
*/
const struct hc_driver *driver; /* hw-specific hooks */
- unsigned saw_irq : 1;
+
+ /* Flags that need to be manipulated atomically */
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
+#define HCD_FLAG_SAW_IRQ 0x00000002
+
unsigned can_wakeup:1; /* hw supports wakeup? */
unsigned remote_wakeup:1;/* sw should use wakeup? */
unsigned rh_registered:1;/* is root hub registered? */
return 0;
}
-/* called by khubd or root hub (re)init threads; leaves HC in halt state */
-static int ehci_pci_reset(struct usb_hcd *hcd)
+/* called during probe() after chip reset completes */
+static int ehci_pci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
if (retval)
return retval;
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
/* NOTE: only the parts below this line are PCI-specific */
switch (pdev->vendor) {
/* AMD8111 EHCI doesn't work, according to AMD errata */
if (pdev->device == 0x7463) {
ehci_info(ehci, "ignoring AMD8111 (errata)\n");
- return -EIO;
+ retval = -EIO;
+ goto done;
}
break;
case PCI_VENDOR_ID_NVIDIA:
/* REVISIT: per-port wake capability (PCI 0x62) currently unused */
retval = ehci_pci_reinit(ehci, pdev);
-
- /* finish init */
- return ehci_init(hcd);
+done:
+ return retval;
}
/*-------------------------------------------------------------------------*/
static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ unsigned long flags;
+ int rc = 0;
if (time_before(jiffies, ehci->next_statechange))
msleep(10);
+ /* Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave (&ehci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ writel (0, &ehci->regs->intr_enable);
+ (void)readl(&ehci->regs->intr_enable);
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+ spin_unlock_irqrestore (&ehci->lock, flags);
+
// could save FLADJ in case of Vaux power loss
// ... we'd only use it to handle clock skew
- return 0;
+ return rc;
}
static int ehci_pci_resume(struct usb_hcd *hcd)
if (time_before(jiffies, ehci->next_statechange))
msleep(100);
+ /* Mark hardware accessible again as we are out of D3 state by now */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
/* If CF is clear, we lost PCI Vaux power and need to restart. */
if (readl(&ehci->regs->configured_flag) != FLAG_CF)
goto restart;
/*
* basic lifecycle operations
*/
- .reset = ehci_pci_reset,
+ .reset = ehci_pci_setup,
.start = ehci_run,
#ifdef CONFIG_PM
.suspend = ehci_pci_suspend,
int epnum;
unsigned long flags;
struct ehci_qh *qh = NULL;
+ int rc = 0;
qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
epnum = ep->desc.bEndpointAddress;
#endif
spin_lock_irqsave (&ehci->lock, flags);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+ &ehci_to_hcd(ehci)->flags))) {
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+
qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+ if (unlikely(qh == NULL)) {
+ rc = -ENOMEM;
+ goto done;
+ }
/* Control/bulk operations through TTs don't need scheduling,
* the HC and TT handle it when the TT has a buffer ready.
*/
- if (likely (qh != NULL)) {
- if (likely (qh->qh_state == QH_STATE_IDLE))
- qh_link_async (ehci, qh_get (qh));
- }
+ if (likely (qh->qh_state == QH_STATE_IDLE))
+ qh_link_async (ehci, qh_get (qh));
+ done:
spin_unlock_irqrestore (&ehci->lock, flags);
- if (unlikely (qh == NULL)) {
+ if (unlikely (qh == NULL))
qtd_list_free (ehci, urb, qtd_list);
- return -ENOMEM;
- }
- return 0;
+ return rc;
}
/*-------------------------------------------------------------------------*/
spin_lock_irqsave (&ehci->lock, flags);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+ &ehci_to_hcd(ehci)->flags))) {
+ status = -ESHUTDOWN;
+ goto done;
+ }
+
/* get qh and force any scheduling errors */
INIT_LIST_HEAD (&empty);
qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- status = iso_stream_schedule (ehci, urb, stream);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+ &ehci_to_hcd(ehci)->flags)))
+ status = -ESHUTDOWN;
+ else
+ status = iso_stream_schedule (ehci, urb, stream);
if (likely (status == 0))
itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
spin_unlock_irqrestore (&ehci->lock, flags);
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- status = iso_stream_schedule (ehci, urb, stream);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+ &ehci_to_hcd(ehci)->flags)))
+ status = -ESHUTDOWN;
+ else
+ status = iso_stream_schedule (ehci, urb, stream);
if (status == 0)
sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
spin_unlock_irqrestore (&ehci->lock, flags);
/*-------------------------------------------------------------------------*/
-// #define OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
spin_lock_irqsave (&ohci->lock, flags);
/* don't submit to a dead HC */
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ retval = -ENODEV;
+ goto fail;
+ }
if (!HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
goto fail;
spin_lock_irqsave (&ohci->lock, flags);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ spin_unlock_irqrestore (&ohci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_RESUME:
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
u32 temp, enables;
int status = -EINPROGRESS;
+ unsigned long flags;
if (time_before (jiffies, ohci->next_statechange))
msleep(5);
- spin_lock_irq (&ohci->lock);
+ spin_lock_irqsave (&ohci->lock, flags);
+
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ spin_unlock_irqrestore (&ohci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
- spin_unlock_irq (&ohci->lock);
+ spin_unlock_irqrestore (&ohci->lock, flags);
if (status == -EBUSY) {
(void) ohci_init (ohci);
return ohci_restart (ohci);
/* handle autosuspended root: finish resuming before
* letting khubd or root hub timer see state changes.
*/
- if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
- || !HC_IS_RUNNING(hcd->state)) {
+ if (unlikely((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
+ || !HC_IS_RUNNING(hcd->state))) {
can_suspend = 0;
goto done;
}
u32 temp;
int retval = 0;
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ return -ESHUTDOWN;
+
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
- /* root hub was already suspended */
- return 0;
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ unsigned long flags;
+ int rc = 0;
+
+ /* Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave (&ohci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+ spin_unlock_irqrestore (&ohci->lock, flags);
+
+ return rc;
}
static int ohci_pci_resume (struct usb_hcd *hcd)
{
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
usb_hcd_resume_root_hub(hcd);
return 0;
}
* at the source, so we must turn off PIRQ.
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
uhci->hc_inaccessible = 1;
hcd->poll_rh = 0;
dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+ /* We aren't in D3 state anymore, we do that even if dead as I
+ * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0
+ */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
if (uhci->rh_state == UHCI_RH_RESET) /* Dead */
return 0;
spin_lock_irq(&uhci->lock);
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && (SPARC32 || SPARC64)
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
config FB_BW2
bool "BWtwo support"
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
config FB_CG3
bool "CGthree support"
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
source "drivers/video/geode/Kconfig"
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
- help
- Say Y if you want support for SBUS or UPA based frame buffer device.
-
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
struct cirrusfb_regs currentmode;
int blank_mode;
- u32 pseudo_palette[17];
+ u32 pseudo_palette[16];
struct { u8 red, green, blue, pad; } palette[256];
#ifdef CONFIG_ZORRO
switch (info->var.bits_per_pixel) {
case 8:
- ((u8*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
case 16:
- ((u16*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
case 24:
case 32:
- ((u32*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
}
return 0;
const struct fb_fillrect *region)
{
int m; /* bytes per pixel */
+ u32 color = (cinfo->info->fix.visual == FB_VISUAL_TRUECOLOR) ?
+ cinfo->pseudo_palette[region->color] : region->color;
+
if(cinfo->info->var.bits_per_pixel == 1) {
cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
region->dx / 8, region->dy,
region->width / 8, region->height,
- region->color,
+ color,
cinfo->currentmode.line_length);
} else {
m = ( cinfo->info->var.bits_per_pixel + 7 ) / 8;
cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
region->dx * m, region->dy,
region->width * m, region->height,
- region->color,
+ color,
cinfo->currentmode.line_length);
}
return;
msk <<= (8 - mod);
if (offset > mod)
- set_bit(FBCON_BIT(7), (void *)&msk1);
+ msk1 |= 0x01;
for (i = 0; i < vc->vc_font.width; i++) {
for (j = 0; j < width; j++) {
(s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
(i)->var.xres : (i)->var.xres_virtual; })
-/*
- * The bitmap is always big endian
- */
-#if defined(__LITTLE_ENDIAN)
-#define FBCON_BIT(b) (7 - (b))
-#else
-#define FBCON_BIT(b) (b)
-#endif
static inline int pattern_test_bit(u32 x, u32 y, u32 pitch, const char *pat)
{
u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8;
pat +=index;
- return (test_bit(FBCON_BIT(bit), (void *)pat));
+ return (*pat) & (0x80 >> bit);
}
static inline void pattern_set_bit(u32 x, u32 y, u32 pitch, char *pat)
u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8;
pat += index;
- set_bit(FBCON_BIT(bit), (void *)pat);
+
+ (*pat) |= 0x80 >> bit;
}
static inline void rotate_ud(const char *in, char *out, u32 width, u32 height)
v9fs_mistat2inode(fcall->params.rstat.stat, file_inode, sb);
kfree(fcall);
+ fcall = NULL;
+ file_dentry->d_op = &v9fs_dentry_operations;
d_instantiate(file_dentry, file_inode);
if (perm & V9FS_DMDIR) {
Version 1.39
------------
-Defer close of a file handle slightly if pending writes depend on that file handle
+Defer close of a file handle slightly if pending writes depend on that handle
(this reduces the EBADF bad file handle errors that can be logged under heavy
stress on writes). Modify cifs Kconfig options to expose CONFIG_CIFS_STATS2
-Fix SFU style symlinks and mknod needed for servers which do not support the CIFS
-Unix Extensions. Fix setfacl/getfacl on bigendian.
+Fix SFU style symlinks and mknod needed for servers which do not support the
+CIFS Unix Extensions. Fix setfacl/getfacl on bigendian. Timeout negative
+dentries so files that the client sees as deleted but that later get created
+on the server will be recognized. Add client side permission check on setattr.
Version 1.38
------------
(such as Windows), permissions can also be checked at the
client, and a crude form of client side permission checking
can be enabled by specifying file_mode and dir_mode on
- the client
+ the client. Note that the mount.cifs helper must be
+ at version 1.10 or higher to support specifying the uid
+ (or gid) in non-numberic form.
gid If CIFS Unix extensions are not supported by the server
this overrides the default gid for inodes.
file_mode If CIFS Unix extensions are not supported by the server
client system. It is typically only needed when the server
supports the CIFS Unix Extensions but the UIDs/GIDs on the
client and server system do not match closely enough to allow
- access by the user doing the mount.
+ access by the user doing the mount, but it may be useful with
+ non CIFS Unix Extension mounts for cases in which the default
+ mode is specified on the mount but is not to be enforced on the
+ client (e.g. perhaps when MultiUserMount is enabled)
Note that this does not affect the normal ACL check on the
target machine done by the server software (of the server
ACL against the user name provided at mount time).
setuids If the CIFS Unix extensions are negotiated with the server
the client will attempt to set the effective uid and gid of
the local process on newly created files, directories, and
- devices (create, mkdir, mknod).
+ devices (create, mkdir, mknod). If the CIFS Unix Extensions
+ are not negotiated, for newly created files and directories
+ instead of using the default uid and gid specified on the
+ the mount, cache the new file's uid and gid locally which means
+ that the uid for the file can change when the inode is
+ reloaded (or the user remounts the share).
nosetuids The client will not attempt to set the uid and gid on
on newly created files, directories, and devices (create,
mkdir, mknod) which will result in the server setting the
uid and gid to the default (usually the server uid of the
user who mounted the share). Letting the server (rather than
- the client) set the uid and gid is the default. This
- parameter has no effect if the CIFS Unix Extensions are not
- negotiated.
+ the client) set the uid and gid is the default. If the CIFS
+ Unix Extensions are not negotiated then the uid and gid for
+ new files will appear to be the uid (gid) of the mounter or the
+ uid (gid) parameter specified on the mount.
netbiosname When mounting to servers via port 139, specifies the RFC1001
source name to use to represent the client netbios machine
name when doing the RFC1001 netbios session initialize.
byte range locks).
remount remount the share (often used to change from ro to rw mounts
or vice versa)
+ sfu When the CIFS Unix Extensions are not negotiated, attempt to
+ create device files and fifos in a format compatible with
+ Services for Unix (SFU). In addition retrieve bits 10-12
+ of the mode via the SETFILEBITS extended attribute (as
+ SFU does). In the future the bottom 9 bits of the mode
+ mode also will be emulated using queries of the security
+ descriptor (ACL).
The mount.cifs mount helper also accepts a few mount options before -o
including:
-version 1.37 October 9, 2005
+Version 1.39 November 30, 2005
A Partial List of Missing Features
==================================
at a time when 8 pages or more are requested. In conjuntion
add support for async_cifs_readpages.
-p) Add support for storing symlink and fifo info to Windows servers
+p) Add support for storing symlink info to Windows servers
in the Extended Attribute format their SFU clients would recognize.
q) Finish fcntl D_NOTIFY support so kde and gnome file list windows
#include <linux/seq_file.h>
#include <linux/vfs.h>
#include <linux/mempool.h>
+#include <linux/delay.h>
#include "cifsfs.h"
#include "cifspdu.h"
#define DECLARE_GLOBALS_HERE
{
cFYI(1,("wake up tasks now - umount begin not complete"));
wake_up_all(&tcon->ses->server->request_q);
+ wake_up_all(&tcon->ses->server->response_q);
+ msleep(1); /* yield */
+ /* we have to kick the requests once more */
+ wake_up_all(&tcon->ses->server->response_q);
+ msleep(1);
}
/* BB FIXME - finish add checks for tidStatus BB */
static int cifs_dnotify_thread(void * dummyarg)
{
+ struct list_head *tmp;
+ struct cifsSesInfo *ses;
+
daemonize("cifsdnotifyd");
allow_signal(SIGTERM);
if(try_to_freeze())
continue;
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(39*HZ);
+ schedule_timeout(15*HZ);
+ read_lock(&GlobalSMBSeslock);
+ /* check if any stuck requests that need
+ to be woken up and wakeq so the
+ thread can wake up and error out */
+ list_for_each(tmp, &GlobalSMBSessionList) {
+ ses = list_entry(tmp, struct cifsSesInfo,
+ cifsSessionList);
+ if(ses && ses->server &&
+ atomic_read(&ses->server->inFlight))
+ wake_up_all(&ses->server->response_q);
+ }
+ read_unlock(&GlobalSMBSeslock);
} while(!signal_pending(current));
complete_and_exit (&cifs_dnotify_exited, 0);
}
check for tcp and smb session status done differently
for those three - in the calling routine */
if(tcon) {
+ if(tcon->tidStatus == CifsExiting) {
+ /* only tree disconnect, open, and write,
+ (and ulogoff which does not have tcon)
+ are allowed as we start force umount */
+ if((smb_command != SMB_COM_WRITE_ANDX) &&
+ (smb_command != SMB_COM_OPEN_ANDX) &&
+ (smb_command != SMB_COM_TREE_DISCONNECT)) {
+ cFYI(1,("can not send cmd %d while umounting",
+ smb_command));
+ return -ENODEV;
+ }
+ }
if((tcon->ses) && (tcon->ses->status != CifsExiting) &&
(tcon->ses->server)){
struct nls_table *nls_codepage;
check for tcp and smb session status done differently
for those three - in the calling routine */
if(tcon) {
+ if(tcon->tidStatus == CifsExiting) {
+ /* only tree disconnect, open, and write,
+ (and ulogoff which does not have tcon)
+ are allowed as we start force umount */
+ if((smb_command != SMB_COM_WRITE_ANDX) &&
+ (smb_command != SMB_COM_OPEN_ANDX) &&
+ (smb_command != SMB_COM_TREE_DISCONNECT)) {
+ cFYI(1,("can not send cmd %d while umounting",
+ smb_command));
+ return -ENODEV;
+ }
+ }
+
if((tcon->ses) && (tcon->ses->status != CifsExiting) &&
(tcon->ses->server)){
struct nls_table *nls_codepage;
else {
rc = cifs_get_inode_info(&newinode, full_path,
buf, inode->i_sb,xid);
- if(newinode)
+ if(newinode) {
newinode->i_mode = mode;
+ if((oplock & CIFS_CREATE_ACTION) &&
+ (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_SET_UID)) {
+ newinode->i_uid = current->fsuid;
+ newinode->i_gid = current->fsgid;
+ }
+ }
}
if (rc != 0) {
direntry->d_op = &cifs_dentry_ops;
d_add(direntry, newInode);
- /* since paths are not looked up by component - the parent directories are presumed to be good here */
+ /* since paths are not looked up by component - the parent
+ directories are presumed to be good here */
renew_parental_timestamps(direntry);
} else if (rc == -ENOENT) {
rc = 0;
+ direntry->d_time = jiffies;
+ if (pTcon->nocase)
+ direntry->d_op = &cifs_ci_dentry_ops;
+ else
+ direntry->d_op = &cifs_dentry_ops;
d_add(direntry, NULL);
+ /* if it was once a directory (but how can we tell?) we could do
+ shrink_dcache_parent(direntry); */
} else {
cERROR(1,("Error 0x%x on cifs_get_inode_info in lookup of %s",
rc,full_path));
{
int isValid = 1;
-/* lock_kernel(); *//* surely we do not want to lock the kernel for a whole network round trip which could take seconds */
-
if (direntry->d_inode) {
if (cifs_revalidate(direntry)) {
- /* unlock_kernel(); */
return 0;
}
} else {
- cFYI(1,
- ("In cifs_d_revalidate with no inode but name = %s and dentry 0x%p",
- direntry->d_name.name, direntry));
+ cFYI(1, ("neg dentry 0x%p name = %s",
+ direntry, direntry->d_name.name));
+ if(time_after(jiffies, direntry->d_time + HZ) ||
+ !lookupCacheEnabled) {
+ d_drop(direntry);
+ isValid = 0;
+ }
}
-/* unlock_kernel(); */
-
return isValid;
}
char *full_path = NULL;
struct inode *newinode = NULL;
- cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p ", mode, inode));
+ cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p", mode, inode));
xid = GetXid();
/* BB to be implemented via Windows secrty descriptors
eg CIFSSMBWinSetPerms(xid, pTcon, full_path, mode,
-1, -1, local_nls); */
+ if(direntry->d_inode) {
+ direntry->d_inode->i_mode = mode;
+ direntry->d_inode->i_mode |= S_IFDIR;
+ if(cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_SET_UID) {
+ direntry->d_inode->i_uid =
+ current->fsuid;
+ direntry->d_inode->i_gid =
+ current->fsgid;
+ }
+ }
}
}
kfree(full_path);
filemap_fdatawrite(direntry->d_inode->i_mapping);
}
if (invalidate_inode) {
- if (direntry->d_inode->i_mapping)
- filemap_fdatawait(direntry->d_inode->i_mapping);
- /* may eventually have to do this for open files too */
- if (list_empty(&(cifsInode->openFileList))) {
- /* Has changed on server - flush read ahead pages */
- cFYI(1, ("Invalidating read ahead data on "
- "closed file"));
- invalidate_remote_inode(direntry->d_inode);
+ /* shrink_dcache not necessary now that cifs dentry ops
+ are exported for negative dentries */
+/* if(S_ISDIR(direntry->d_inode->i_mode))
+ shrink_dcache_parent(direntry); */
+ if (S_ISREG(direntry->d_inode->i_mode)) {
+ if (direntry->d_inode->i_mapping)
+ filemap_fdatawait(direntry->d_inode->i_mapping);
+ /* may eventually have to do this for open files too */
+ if (list_empty(&(cifsInode->openFileList))) {
+ /* changed on server - flush read ahead pages */
+ cFYI(1, ("Invalidating read ahead data on "
+ "closed file"));
+ invalidate_remote_inode(direntry->d_inode);
+ }
}
}
/* up(&direntry->d_inode->i_sem); */
cFYI(1, ("In cifs_setattr, name = %s attrs->iavalid 0x%x ",
direntry->d_name.name, attrs->ia_valid));
+
cifs_sb = CIFS_SB(direntry->d_inode->i_sb);
pTcon = cifs_sb->tcon;
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
+ /* check if we have permission to change attrs */
+ rc = inode_change_ok(direntry->d_inode, attrs);
+ if(rc < 0) {
+ FreeXid(xid);
+ return rc;
+ } else
+ rc = 0;
+ }
+
down(&direntry->d_sb->s_vfs_rename_sem);
full_path = build_path_from_dentry(direntry);
up(&direntry->d_sb->s_vfs_rename_sem);
1 /* 45 seconds */);
cFYI(1,("Wrt seteof rc %d", rc));
}
- }
+ } else
+ rc = -EINVAL;
+
if (rc != 0) {
/* Set file size by pathname rather than by handle
either because no valid, writeable file handle for
if(smb->Command == SMB_COM_LOCKING_ANDX)
return 0;
else
- cERROR(1, ("Rcvd Request not response "));
+ cERROR(1, ("Rcvd Request not response"));
}
} else { /* bad signature or mid */
if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff))
cERROR(1,
- ("Bad protocol string signature header %x ",
+ ("Bad protocol string signature header %x",
*(unsigned int *) smb->Protocol));
if (mid != smb->Mid)
cERROR(1, ("Mids do not match"));
__u32 len = smb->smb_buf_length;
__u32 clc_len; /* calculated length */
cFYI(0,
- ("Entering checkSMB with Length: %x, smb_buf_length: %x ",
+ ("Entering checkSMB with Length: %x, smb_buf_length: %x",
length, len));
if (((unsigned int)length < 2 + sizeof (struct smb_hdr)) ||
(len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4)) {
cERROR(1, ("bad smb size detected for Mid=%d", smb->Mid));
/* Windows XP can return a few bytes too much, presumably
an illegal pad, at the end of byte range lock responses
- so we allow for up to eight byte pad, as long as actual
+ so we allow for that three byte pad, as long as actual
received length is as long or longer than calculated length */
- if((4+len > clc_len) && (len <= clc_len + 3))
+ /* We have now had to extend this more, since there is a
+ case in which it needs to be bigger still to handle a
+ malformed response to transact2 findfirst from WinXP when
+ access denied is returned and thus bcc and wct are zero
+ but server says length is 0x21 bytes too long as if the server
+ forget to reset the smb rfc1001 length when it reset the
+ wct and bcc to minimum size and drop the t2 parms and data */
+ if((4+len > clc_len) && (len <= clc_len + 512))
return 0;
else
return 1;
ERRHRD, ERRgeneral, NT_STATUS_ACCOUNT_RESTRICTION}, {
ERRSRV, 2241, NT_STATUS_INVALID_LOGON_HOURS}, {
ERRSRV, 2240, NT_STATUS_INVALID_WORKSTATION}, {
- ERRSRV, 2242, NT_STATUS_PASSWORD_EXPIRED}, {
+ ERRSRV, ERRpasswordExpired, NT_STATUS_PASSWORD_EXPIRED}, {
ERRSRV, 2239, NT_STATUS_ACCOUNT_DISABLED}, {
ERRHRD, ERRgeneral, NT_STATUS_NONE_MAPPED}, {
ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_LUIDS_REQUESTED}, {
ERRDOS, 193, NT_STATUS_IMAGE_CHECKSUM_MISMATCH}, {
ERRHRD, ERRgeneral, NT_STATUS_LOST_WRITEBEHIND_DATA}, {
ERRHRD, ERRgeneral, NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID}, {
- ERRSRV, 2242, NT_STATUS_PASSWORD_MUST_CHANGE}, {
+ ERRSRV, ERRpasswordExpired, NT_STATUS_PASSWORD_MUST_CHANGE}, {
ERRHRD, ERRgeneral, NT_STATUS_NOT_FOUND}, {
ERRHRD, ERRgeneral, NT_STATUS_NOT_TINY_STREAM}, {
ERRHRD, ERRgeneral, NT_STATUS_RECOVERY_FAILURE}, {
*pbytes_returned = in_buf->smb_buf_length;
/* BB special case reconnect tid and uid here? */
+ /* BB special case Errbadpassword and pwdexpired here */
rc = map_smb_to_linux_error(in_buf);
/* convert ByteCount if necessary */
if (IS_ERR(dentry))
return PTR_ERR(dentry);
+ if (!dentry->d_inode) {
+ error = -ENOENT;
+ goto out;
+ }
+
error = security_quota_on(dentry);
if (!error)
error = vfs_quota_on_inode(dentry->d_inode, type, format_id);
+out:
dput(dentry);
return error;
}
struct page *page, unsigned long address)
{
struct mm_struct *mm = vma->vm_mm;
- pgd_t * pgd;
- pud_t * pud;
- pmd_t * pmd;
pte_t * pte;
spinlock_t *ptl;
goto out;
flush_dcache_page(page);
- pgd = pgd_offset(mm, address);
- pud = pud_alloc(mm, pgd, address);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, address);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, address, &ptl);
+ pte = get_locked_pte(mm, address, &ptl);
if (!pte)
goto out;
if (!pte_none(*pte)) {
if (input->group != EXT3_SB(sb)->s_groups_count) {
ext3_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!\n");
+ err = -EBUSY;
goto exit_journal;
}
return 1;
}
+static int dir_alias(struct inode *inode)
+{
+ if (S_ISDIR(inode->i_mode)) {
+ /* Don't allow creating an alias to a directory */
+ struct dentry *alias = d_find_alias(inode);
+ if (alias) {
+ dput(alias);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static inline int invalid_nodeid(u64 nodeid)
+{
+ return !nodeid || nodeid == FUSE_ROOT_ID;
+}
+
static struct dentry_operations fuse_dentry_operations = {
.d_revalidate = fuse_dentry_revalidate,
};
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID))
+ if (!err && invalid_nodeid(outarg.nodeid))
err = -EIO;
if (!err) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
}
err = -EIO;
- if (!S_ISREG(outentry.attr.mode))
+ if (!S_ISREG(outentry.attr.mode) || invalid_nodeid(outentry.nodeid))
goto out_free_ff;
inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
fuse_put_request(fc, req);
return err;
}
- if (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID) {
+ if (invalid_nodeid(outarg.nodeid)) {
fuse_put_request(fc, req);
return -EIO;
}
fuse_put_request(fc, req);
/* Don't allow userspace to do really stupid things... */
- if ((inode->i_mode ^ mode) & S_IFMT) {
+ if (((inode->i_mode ^ mode) & S_IFMT) || dir_alias(inode)) {
iput(inode);
return -EIO;
}
err = fuse_lookup_iget(dir, entry, &inode);
if (err)
return ERR_PTR(err);
- if (inode && S_ISDIR(inode->i_mode)) {
- /* Don't allow creating an alias to a directory */
- struct dentry *alias = d_find_alias(inode);
- if (alias) {
- dput(alias);
- iput(inode);
- return ERR_PTR(-EIO);
- }
+ if (inode && dir_alias(inode)) {
+ iput(inode);
+ return ERR_PTR(-EIO);
}
d_add(entry, inode);
return NULL;
#define HFSPLUS_SB_WRITEBACKUP 0x0001
#define HFSPLUS_SB_NODECOMPOSE 0x0002
+#define HFSPLUS_SB_FORCE 0x0004
struct hfsplus_inode_info {
} __packed;
/* HFS+ volume attributes */
-#define HFSPLUS_VOL_UNMNT (1 << 8)
-#define HFSPLUS_VOL_SPARE_BLK (1 << 9)
-#define HFSPLUS_VOL_NOCACHE (1 << 10)
-#define HFSPLUS_VOL_INCNSTNT (1 << 11)
-#define HFSPLUS_VOL_SOFTLOCK (1 << 15)
+#define HFSPLUS_VOL_UNMNT (1 << 8)
+#define HFSPLUS_VOL_SPARE_BLK (1 << 9)
+#define HFSPLUS_VOL_NOCACHE (1 << 10)
+#define HFSPLUS_VOL_INCNSTNT (1 << 11)
+#define HFSPLUS_VOL_NODEID_REUSED (1 << 12)
+#define HFSPLUS_VOL_JOURNALED (1 << 13)
+#define HFSPLUS_VOL_SOFTLOCK (1 << 15)
/* HFS+ BTree node descriptor */
struct hfs_bnode_desc {
opt_umask, opt_uid, opt_gid,
opt_part, opt_session, opt_nls,
opt_nodecompose, opt_decompose,
- opt_err
+ opt_force, opt_err
};
static match_table_t tokens = {
{ opt_nls, "nls=%s" },
{ opt_decompose, "decompose" },
{ opt_nodecompose, "nodecompose" },
+ { opt_force, "force" },
{ opt_err, NULL }
};
case opt_nodecompose:
sbi->flags |= HFSPLUS_SB_NODECOMPOSE;
break;
+ case opt_force:
+ sbi->flags |= HFSPLUS_SB_FORCE;
+ break;
default:
return 0;
}
return 0;
if (!(*flags & MS_RDONLY)) {
struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
+ struct hfsplus_sb_info sbi;
+
+ memset(&sbi, 0, sizeof(struct hfsplus_sb_info));
+ sbi.nls = HFSPLUS_SB(sb).nls;
+ if (!hfsplus_parse_options(data, &sbi))
+ return -EINVAL;
if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
"running fsck.hfsplus is recommended. leaving read-only.\n");
sb->s_flags |= MS_RDONLY;
*flags |= MS_RDONLY;
+ } else if (sbi.flags & HFSPLUS_SB_FORCE) {
+ /* nothing */
} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
printk("HFS+-fs: Filesystem is marked locked, leaving read-only.\n");
sb->s_flags |= MS_RDONLY;
*flags |= MS_RDONLY;
+ } else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+ printk("HFS+-fs: Filesystem is marked journaled, leaving read-only.\n");
+ sb->s_flags |= MS_RDONLY;
+ *flags |= MS_RDONLY;
}
}
return 0;
printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
"running fsck.hfsplus is recommended. mounting read-only.\n");
sb->s_flags |= MS_RDONLY;
+ } else if (sbi->flags & HFSPLUS_SB_FORCE) {
+ /* nothing */
} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
if (!silent)
printk("HFS+-fs: Filesystem is marked locked, mounting read-only.\n");
sb->s_flags |= MS_RDONLY;
+ } else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+ if (!silent)
+ printk("HFS+-fs: write access to a jounaled filesystem is not supported, "
+ "use the force option at your own risk, mounting read-only.\n");
+ sb->s_flags |= MS_RDONLY;
}
+ sbi->flags &= ~HFSPLUS_SB_FORCE;
/* Load metadata objects (B*Trees) */
HFSPLUS_SB(sb).ext_tree = hfs_btree_open(sb, HFSPLUS_EXT_CNID);
c = JFFS2_SB_INFO(inode->i_sb);
jffs2_init_inode_info(f);
+ down(&f->sem);
ret = jffs2_do_read_inode(c, f, inode->i_ino, &latest_node);
f = JFFS2_INODE_INFO(inode);
jffs2_init_inode_info(f);
+ down(&f->sem);
memset(ri, 0, sizeof(*ri));
/* Set OS-specific defaults for new inodes */
if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
SLAB_CTOR_CONSTRUCTOR) {
- init_MUTEX_LOCKED(&ei->sem);
+ init_MUTEX(&ei->sem);
inode_init_once(&ei->vfs_inode);
}
}
/*
* Calculate numa node maps for a vma
*/
-static struct numa_maps *get_numa_maps(const struct vm_area_struct *vma)
+static struct numa_maps *get_numa_maps(struct vm_area_struct *vma)
{
+ int i;
struct page *page;
unsigned long vaddr;
- struct mm_struct *mm = vma->vm_mm;
- int i;
struct numa_maps *md = kmalloc(sizeof(struct numa_maps), GFP_KERNEL);
if (!md)
md->node[i] =0;
for (vaddr = vma->vm_start; vaddr < vma->vm_end; vaddr += PAGE_SIZE) {
- page = follow_page(mm, vaddr, 0);
+ page = follow_page(vma, vaddr, 0);
if (page) {
int count = page_mapcount(page);
INITIALIZE_PATH(path);
int pos_in_item;
int jbegin_count = JOURNAL_PER_BALANCE_CNT;
- loff_t byte_offset = (block << inode->i_sb->s_blocksize_bits) + 1;
+ loff_t byte_offset = ((loff_t)block << inode->i_sb->s_blocksize_bits)+1;
int retval;
int use_get_block = 0;
int bytes_copied = 0;
journal->j_cnode_used = 0;
journal->j_must_wait = 0;
+ if (journal->j_cnode_free == 0) {
+ reiserfs_warning(p_s_sb, "journal-2004: Journal cnode memory "
+ "allocation failed (%ld bytes). Journal is "
+ "too large for available memory. Usually "
+ "this is due to a journal that is too large.",
+ sizeof (struct reiserfs_journal_cnode) * num_cnodes);
+ goto free_and_return;
+ }
+
init_journal_hash(p_s_sb);
jl = journal->j_current_jl;
jl->j_list_bitmap = get_list_bitmap(p_s_sb, jl);
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 28-Mar-2005 LCVR Fixed definition of GPB10
* 26-Oct-2005 BJD Added generic configuration types
+ * 27-Nov-2005 LCVR Added definitions to S3C2400 registers
*/
#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-/* port A - 22bits, zero in bit X makes pin X output
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * S3C2400: 18bits, zero in bit X makes pin X output
* 1 makes port special function, this is default
*/
#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
+#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
+
#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE (1<<10)
#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0 (1<<11)
#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
+#define S3C2400_GPA12_nCAS1 (1<<12)
#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
+#define S3C2400_GPA13_nGCS1 (1<<13)
#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
+#define S3C2400_GPA14_nGCS2 (1<<14)
#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
+#define S3C2400_GPA15_nGCS3 (1<<15)
#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
+#define S3C2400_GPA16_nGCS4 (1<<16)
#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
+#define S3C2400_GPA17_nGCS5 (1<<17)
#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
#define S3C2410_GPA18_OUT (0<<18)
#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
-/* 0x08 and 0x0c are reserved */
+/* 0x08 and 0x0c are reserved on S3C2410 */
-/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
* 00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=data, 11=special function
+
* bit 0,1 = pin 0, 2,3= pin 1...
*
* CPBUP = pull up resistor control, 1=disabled, 0=enabled
#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
+#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
+
/* no i/o pin in port b can have value 3! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
+#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
#define S3C2410_GPB1_INP (0x00 << 2)
#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
+#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
#define S3C2410_GPB2_INP (0x00 << 4)
#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
+#define S3C2400_GPB2_DATA18 (0x02 << 4)
+#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
#define S3C2410_GPB3_INP (0x00 << 6)
#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
+#define S3C2400_GPB3_DATA19 (0x02 << 6)
+#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
#define S3C2410_GPB4_INP (0x00 << 8)
#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
+#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
+#define S3C2400_GPB4_RXD1 (0x03 << 8)
+#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2400_GPB5_DATA21 (0x02 << 10)
+#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2400_GPB6_DATA22 (0x02 << 12)
+#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB8_INP (0x00 << 16)
#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2400_GPB9_DATA25 (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS (0x03 << 20)
+
+#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP (0x00 << 22)
+#define S3C2400_GPB11_OUTP (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP (0x00 << 24)
+#define S3C2400_GPB12_OUTP (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP (0x00 << 26)
+#define S3C2400_GPB13_OUTP (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP (0x00 << 28)
+#define S3C2400_GPB14_OUTP (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP (0x00 << 30)
+#define S3C2400_GPB15_OUTP (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x) (1<<(x))
/* Port C consits of 16 GPIO/Special function
*
#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
+#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
+
#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
#define S3C2410_GPC0_INP (0x00 << 0)
#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
+#define S3C2400_GPC0_VD0 (0x02 << 0)
#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
#define S3C2410_GPC1_INP (0x00 << 2)
#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
+#define S3C2400_GPC1_VD1 (0x02 << 2)
#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
#define S3C2410_GPC2_INP (0x00 << 4)
#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
+#define S3C2400_GPC2_VD2 (0x02 << 4)
#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
#define S3C2410_GPC3_INP (0x00 << 6)
#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
+#define S3C2400_GPC3_VD3 (0x02 << 6)
#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
#define S3C2410_GPC4_INP (0x00 << 8)
#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
+#define S3C2400_GPC4_VD4 (0x02 << 8)
#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
#define S3C2410_GPC5_INP (0x00 << 10)
#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
+#define S3C2400_GPC5_VD5 (0x02 << 10)
#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
#define S3C2410_GPC6_INP (0x00 << 12)
#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
+#define S3C2400_GPC6_VD6 (0x02 << 12)
#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
#define S3C2410_GPC7_INP (0x00 << 14)
#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
+#define S3C2400_GPC7_VD7 (0x02 << 14)
#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
#define S3C2410_GPC8_INP (0x00 << 16)
#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
+#define S3C2400_GPC8_VD8 (0x02 << 16)
#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
#define S3C2410_GPC9_INP (0x00 << 18)
#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
+#define S3C2400_GPC9_VD9 (0x02 << 18)
#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
#define S3C2410_GPC10_INP (0x00 << 20)
#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
+#define S3C2400_GPC10_VD10 (0x02 << 20)
#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
#define S3C2410_GPC11_INP (0x00 << 22)
#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
+#define S3C2400_GPC11_VD11 (0x02 << 22)
#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
#define S3C2410_GPC12_INP (0x00 << 24)
#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
+#define S3C2400_GPC12_VD12 (0x02 << 24)
#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
#define S3C2410_GPC13_INP (0x00 << 26)
#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
+#define S3C2400_GPC13_VD13 (0x02 << 26)
#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
#define S3C2410_GPC14_INP (0x00 << 28)
#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
+#define S3C2400_GPC14_VD14 (0x02 << 28)
#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
#define S3C2410_GPC15_INP (0x00 << 30)
#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
+#define S3C2400_GPC15_VD15 (0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x) (1<<(x))
-/* Port D consists of 16 GPIO/Special function
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
*
* almost identical setup to port b, but the special functions are mostly
* to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
*/
#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
+#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
+
#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
#define S3C2410_GPD0_INP (0x00 << 0)
#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
+#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
#define S3C2410_GPD1_INP (0x00 << 2)
#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
+#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
#define S3C2410_GPD2_INP (0x00 << 4)
#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
+#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
#define S3C2410_GPD3_INP (0x00 << 6)
#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
+#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
#define S3C2410_GPD4_INP (0x00 << 8)
#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
+#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
#define S3C2410_GPD5_INP (0x00 << 10)
#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
+#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
#define S3C2410_GPD6_INP (0x00 << 12)
#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
+#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
#define S3C2410_GPD7_INP (0x00 << 14)
#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
+#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
#define S3C2410_GPD8_INP (0x00 << 16)
#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
+#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
#define S3C2410_GPD9_INP (0x00 << 18)
#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
+#define S3C2400_GPD9_TCLK0 (0x02 << 18)
+#define S3C2410_GPD9_MASK (0x03 << 18)
#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
#define S3C2410_GPD10_INP (0x00 << 20)
#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
+#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
#define S3C2410_GPD11_INP (0x00 << 22)
#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
-/* Port E consists of 16 GPIO/Special function
+#define S3C2410_GPD_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
*
* again, the same as port B, but dealing with I2S, SDI, and
* more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
*/
#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
+#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
+
#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2400_GPE1_EINT1 (0x02 << 2)
+#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2400_GPE2_EINT2 (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2400_GPE3_EINT3 (0x02 << 6)
+#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2400_GPE4_EINT4 (0x02 << 8)
+#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2400_GPE5_EINT5 (0x02 << 10)
+#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
+#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2410_GPE11_INP (0x00 << 22)
#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
#define S3C2410_GPE12_INP (0x00 << 24)
#define S3C2410_GPE_PUPDIS(x) (1<<(x))
-/* Port F consists of 8 GPIO/Special function
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
*
* GPIO / interrupt inputs
*
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
*
* pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
*/
#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
+#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
+
#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
#define S3C2410_GPF0_INP (0x00 << 0)
#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
+#define S3C2400_GPF0_RXD0 (0x02 << 0)
#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
#define S3C2410_GPF1_INP (0x00 << 2)
#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
+#define S3C2400_GPF1_RXD1 (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
#define S3C2410_GPF2_INP (0x00 << 4)
#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
+#define S3C2400_GPF2_TXD0 (0x02 << 4)
#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
#define S3C2410_GPF3_INP (0x00 << 6)
#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
+#define S3C2400_GPF3_TXD1 (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
#define S3C2410_GPF4_INP (0x00 << 8)
#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
+#define S3C2400_GPF4_nRTS0 (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
#define S3C2410_GPF5_INP (0x00 << 10)
#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
+#define S3C2400_GPF5_nCTS0 (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
#define S3C2410_GPF6_INP (0x00 << 12)
#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
#define S3C2410_GPF7_INP (0x00 << 14)
#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
-/* Port G consists of 8 GPIO/IRQ/Special function
+#define S3C2410_GPF_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
*
* GPGCON has 2 bits for each of the input pins on port F
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
*/
#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
+#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
+
#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
#define S3C2410_GPG0_INP (0x00 << 0)
#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
#define S3C2410_GPG1_INP (0x00 << 2)
#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
#define S3C2410_GPG2_INP (0x00 << 4)
#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
+#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
#define S3C2410_GPG3_INP (0x00 << 6)
#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
+#define S3C2400_GPG3_I2SSDO (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
#define S3C2410_GPG4_INP (0x00 << 8)
#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD (0x02 << 10)
+#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT (0x02 << 12)
+#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO (0x02 << 14)
+#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
#define S3C2410_GPG8_INP (0x00 << 16)
#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
+#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
#define S3C2410_GPG9_INP (0x00 << 18)
#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
+#define S3C2400_GPG9_SPICLK (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
#define S3C2410_GPG10_INP (0x00 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* miscellaneous control */
-
+#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
/* see clock.h for dclk definitions */
/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN (0)
+#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN (0)
+#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
-#define S3C2410_MISCCR_USBDEV (0)
+#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
+
+#define S3C2410_MISCCR_USBDEV (0<<3)
#define S3C2410_MISCCR_USBHOST (1<<3)
#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
*
* Samsung datasheet p9-25
*/
-
+#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
#define S3C2410_GSTATUS2_PONRESET (1<<0)
+/* open drain control register */
+#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
sema_init(sem, 0);
}
-static inline int sema_count(struct semaphore *sem)
-{
- return atomic_read(&sem->count);
-}
-
/*
* special register calling convention
*/
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+" wfene\n"
+#endif
" strexeq %0, %2, [%1]\n"
" teqeq %0, #0\n"
" bne 1b"
smp_mb();
__asm__ __volatile__(
-" str %1, [%0]"
+" str %1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
+" sev"
+#endif
:
: "r" (&lock->lock), "r" (0)
: "cc");
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+" wfene\n"
+#endif
" strexeq %0, %2, [%1]\n"
" teq %0, #0\n"
" bne 1b"
smp_mb();
__asm__ __volatile__(
- "str %1, [%0]"
+ "str %1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
+" sev\n"
+#endif
:
: "r" (&rw->lock), "r" (0)
: "cc");
"1: ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
+#ifdef CONFIG_CPU_32v6K
+" wfemi\n"
+#endif
" rsbpls %0, %1, #0\n"
" bmi 1b"
: "=&r" (tmp), "=&r" (tmp2)
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
+#ifdef CONFIG_CPU_32v6K
+"\n cmp %0, #0\n"
+" mcreq p15, 0, %0, c7, c10, 4\n"
+" seveq"
+#endif
: "=&r" (tmp), "=&r" (tmp2)
: "r" (&rw->lock)
: "cc");
#include <linux/config.h>
#include <linux/threads.h>
+#include <linux/irq.h>
typedef struct {
unsigned int __softirq_pending;
/*
* some bits needed for parts of the IDE subsystem to compile
*/
-#define __ide_mm_insw(port, addr, n) insw(port, addr, n)
-#define __ide_mm_insl(port, addr, n) insl(port, addr, n)
-#define __ide_mm_outsw(port, addr, n) outsw(port, addr, n)
-#define __ide_mm_outsl(port, addr, n) outsl(port, addr, n)
+#define __ide_mm_insw(port, addr, n) insw((unsigned long) (port), addr, n)
+#define __ide_mm_insl(port, addr, n) insl((unsigned long) (port), addr, n)
+#define __ide_mm_outsw(port, addr, n) outsw((unsigned long) (port), addr, n)
+#define __ide_mm_outsl(port, addr, n) outsl((unsigned long) (port), addr, n)
#endif /* __KERNEL__ */
#define devmem_is_allowed(pfn) 1
-#define __pa(vaddr) virt_to_phys((void *) vaddr)
-#define __va(paddr) phys_to_virt((unsigned long) paddr)
+#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr))
+#define __va(paddr) phys_to_virt((unsigned long) (paddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#include <linux/spinlock.h>
#include <linux/rwsem.h>
-#define SEMAPHORE_DEBUG WAITQUEUE_DEBUG
+#define SEMAPHORE_DEBUG 0
/*
* the semaphore definition
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/*
* macros/functions for gaining access to the thread information structure
# define pfn_to_page(pfn) (mem_map + (pfn))
#elif defined(CONFIG_DISCONTIGMEM)
extern struct page *vmem_map;
+extern unsigned long min_low_pfn;
extern unsigned long max_low_pfn;
-# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
# define page_to_pfn(page) ((unsigned long) (page - vmem_map))
# define pfn_to_page(pfn) (vmem_map + (pfn))
#endif
*/
#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr)
{
unsigned long flags;
# endif
#endif
-#if defined(CONFIG_PLAT_M32700UT)
-#include <asm/irq.h>
-#include <asm/m32700ut/m32700ut_pld.h>
-#endif
+#include <asm/m32r.h>
+
#define IDE_ARCH_OBSOLETE_DEFAULTS
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
+ case 0x1f0: return PLD_IRQ_CFIREQ;
+ default:
+ return 0;
+#elif defined(CONFIG_PLAT_MAPPI3)
case 0x1f0: return PLD_IRQ_CFIREQ;
+ case 0x170: return PLD_IRQ_IDEIREQ;
default:
return 0;
#else
#define M32R_IRQ_I2C (28) /* I2C-BUS */
#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */
-#define PLD_IRQ_CFC_EJECT (8) /* INT7 CFC Card Eject */
+#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
*/
#include <linux/config.h>
+#include <asm/assembler.h>
#ifdef __KERNEL__
!(flags & 0x40); \
})
-#endif /* __KERNEL__ */
-
#define nop() __asm__ __volatile__ ("nop" : : )
#define xchg(ptr,x) \
return (tmp);
}
+#define __HAVE_ARCH_CMPXCHG 1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
+{
+ unsigned long flags;
+ unsigned int retval;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n"
+ " bne %0, %2, 1f; \n"
+ M32R_UNLOCK" %3, @%1; \n"
+ " bra 2f; \n"
+ " .fillinsn \n"
+ "1:"
+ M32R_UNLOCK" %2, @%1; \n"
+ " .fillinsn \n"
+ "2:"
+ : "=&r" (retval)
+ : "r" (p), "r" (old), "r" (new)
+ : "cbit", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+#if 0 /* we don't have __cmpxchg_u64 */
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+#endif /* 0 */
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+#endif /* __KERNEL__ */
+
/*
* Memory barrier.
*
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Daniel Jacobowitz
+ */
+#ifndef __ASM_MACH_QEMU_TIMEX_H
+#define __ASM_MACH_QEMU_TIMEX_H
+
+/*
+ * We use a simulated i8254 PIC...
+ */
+#define CLOCK_TICK_RATE 1193182
+
+#endif /* __ASM_MACH_QEMU_TIMEX_H */
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-/* Make a non-present pseudo-TTE. */
-static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
-{
- pte_t pte;
- pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
- ~(unsigned long)_PAGE_CACHE);
- pte_val(pte) |= (((unsigned long)space) << 32);
- return pte;
-}
-
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
#define __swp_offset(entry) ((entry).val >> (PAGE_SHIFT + 8UL))
#define LINUX_ATMDEV_H
-#include <linux/config.h>
#include <linux/atmapi.h>
#include <linux/atm.h>
#include <linux/atmioc.h>
#ifdef __KERNEL__
+#include <linux/config.h>
#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
enum {
- ATM_DF_CLOSE, /* close device when last VCC is closed */
+ ATM_DF_REMOVED, /* device was removed from atm_devs list */
};
int number,unsigned long *flags); /* number == -1: pick first available */
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
-void shutdown_atm_dev(struct atm_dev *dev);
void vcc_insert_socket(struct sock *sk);
static inline void atm_dev_put(struct atm_dev *dev)
{
- atomic_dec(&dev->refcnt);
-
- if ((atomic_read(&dev->refcnt) == 1) &&
- test_bit(ATM_DF_CLOSE,&dev->flags))
- shutdown_atm_dev(dev);
+ if (atomic_dec_and_test(&dev->refcnt)) {
+ BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
+ if (dev->ops->dev_close)
+ dev->ops->dev_close(dev);
+ kfree(dev);
+ }
}
int atm_charge(struct atm_vcc *vcc,int truesize);
struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
gfp_t gfp_flags);
-int atm_pcr_goal(struct atm_trafprm *tp);
+int atm_pcr_goal(const struct atm_trafprm *tp);
void vcc_release_async(struct atm_vcc *vcc, int reply);
pid_t process_pid;
pid_t process_tgid;
union {
- uid_t ruid; /* current->uid */
- gid_t rgid; /* current->gid */
+ __u32 ruid; /* task uid */
+ __u32 rgid; /* task gid */
} r;
union {
- uid_t euid;
- gid_t egid;
+ __u32 euid;
+ __u32 egid;
} e;
} id;
#ifdef CONFIG_HOTPLUG_CPU
/* Stop CPUs going up and down. */
-extern struct semaphore cpucontrol;
-#define lock_cpu_hotplug() down(&cpucontrol)
-#define unlock_cpu_hotplug() up(&cpucontrol)
-#define lock_cpu_hotplug_interruptible() down_interruptible(&cpucontrol)
+extern void lock_cpu_hotplug(void);
+extern void unlock_cpu_hotplug(void);
+extern int lock_cpu_hotplug_interruptible(void);
#define hotcpu_notifier(fn, pri) { \
static struct notifier_block fn##_nb = \
{ .notifier_call = fn, .priority = pri }; \
#define I2C_DRIVERID_SAA7127 72 /* saa7124 video encoder */
#define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */
#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */
+#define I2C_DRIVERID_I2C_IR 75 /* I2C InfraRed on Video boards */
#define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */
#define I2C_DRIVERID_EXP1 0xF1
extern int register_memory_notifier(struct notifier_block *nb);
extern void unregister_memory_notifier(struct notifier_block *nb);
-extern struct sysdev_class memory_sysdev_class;
#endif /* CONFIG_MEMORY_HOTPLUG */
#define hotplug_memory_notifier(fn, pri) { \
#define VM_GROWSDOWN 0x00000100 /* general info on the segment */
#define VM_GROWSUP 0x00000200
#define VM_SHM 0x00000000 /* Means nothing: delete it later */
-#define VM_UNPAGED 0x00000400 /* Pages managed without map count */
+#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
#define VM_EXECUTABLE 0x00001000
#define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */
#define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */
#define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */
+#define VM_INCOMPLETE 0x02000000 /* Strange partial PFN mapping marker */
#ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */
#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
unsigned long truncate_count; /* Compare vm_truncate_count */
};
+struct page *vm_normal_page(struct vm_area_struct *, unsigned long, pte_t);
unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *);
unsigned long unmap_vmas(struct mmu_gather **tlb,
extern struct shrinker *set_shrinker(int, shrinker_t);
extern void remove_shrinker(struct shrinker *shrinker);
+extern pte_t *FASTCALL(get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl));
+
int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address);
unsigned long vmalloc_to_pfn(void *addr);
int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
unsigned long pfn, unsigned long size, pgprot_t);
+int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
-struct page *follow_page(struct mm_struct *, unsigned long address,
+struct page *follow_page(struct vm_area_struct *, unsigned long address,
unsigned int foll_flags);
#define FOLL_WRITE 0x01 /* check pte is writable */
#define FOLL_TOUCH 0x02 /* mark page accessed */
/* class 5 */
#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
-#define MMC_ERASE 37 /* ac R1b */
+#define MMC_ERASE 38 /* ac R1b */
/* class 9 */
#define MMC_FAST_IO 39 /* ac <Complex> R4 */
/* class 8 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
-#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */
+#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
/* SD commands type argument response */
/* class 8 */
/* Common Flash Interface structures
* See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.56 2005/11/07 11:14:54 gleixner Exp $
+ * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
*/
#ifndef __MTD_CFI_H__
}
}
+static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
+{
+ map_word val = map_read(map, addr);
+
+ if (map_bankwidth_is_1(map)) {
+ return val.x[0] & 0xff;
+ } else if (map_bankwidth_is_2(map)) {
+ return cfi16_to_cpu(val.x[0]);
+ } else {
+ /* No point in a 64-bit byteswap since that would just be
+ swapping the responses from different chips, and we are
+ only interested in one chip (a representative sample) */
+ return cfi32_to_cpu(val.x[0]);
+ }
+}
+
static inline void cfi_udelay(int us)
{
if (us >= 1000) {
/*
* Called from mm/vmscan.c to handle paging out
*/
-int page_referenced(struct page *, int is_locked, int ignore_token);
+int page_referenced(struct page *, int is_locked);
int try_to_unmap(struct page *);
/*
#define anon_vma_prepare(vma) (0)
#define anon_vma_link(vma) do {} while (0)
-#define page_referenced(page,l,i) TestClearPageReferenced(page)
+#define page_referenced(page,l) TestClearPageReferenced(page)
#define try_to_unmap(page) SWAP_FAIL
#endif /* CONFIG_MMU */
#define PF_SYNCWRITE 0x00200000 /* I am doing a sync write */
#define PF_BORROWED_MM 0x00400000 /* I am a kthread doing use_mm */
#define PF_RANDOMIZE 0x00800000 /* randomize virtual address space */
-#define PF_HOTPLUG_CPU 0x01000000 /* Currently performing CPU hotplug */
/*
* Only the _current_ task can read/write to tsk->flags, but other
#define PORT_IP3106 70
+/* Hilscher netx */
+#define PORT_NETX 71
+
#ifdef __KERNEL__
#include <linux/config.h>
__put_swap_token(mm);
}
+static inline void disable_swap_token(void)
+{
+ put_swap_token(swap_token_mm);
+}
+
#else /* CONFIG_SWAP */
#define total_swap_pages 0
#define put_swap_token(x) do { } while(0)
#define grab_swap_token() do { } while(0)
#define has_swap_token(x) 0
+#define disable_swap_token() do { } while(0)
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
struct tveeprom {
u32 has_radio;
u32 has_ir; /* 0: no IR, 1: IR present, 2: unknown */
+ u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
u32 tuner_type;
u32 tuner_formats;
+ u32 tuner_hauppauge_model;
u32 tuner2_type;
u32 tuner2_formats;
+ u32 tuner2_hauppauge_model;
u32 digitizer;
u32 digitizer_formats;
u32 revision;
u32 serial_number;
char rev_str[5];
+ u8 MAC_address[6];
};
void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
#include <asm/semaphore.h>
/* This protects CPUs going up and down... */
-DECLARE_MUTEX(cpucontrol);
-EXPORT_SYMBOL_GPL(cpucontrol);
+static DECLARE_MUTEX(cpucontrol);
static struct notifier_block *cpu_chain;
-/*
- * Used to check by callers if they need to acquire the cpucontrol
- * or not to protect a cpu from being removed. Its sometimes required to
- * call these functions both for normal operations, and in response to
- * a cpu being added/removed. If the context of the call is in the same
- * thread context as a CPU hotplug thread, we dont need to take the lock
- * since its already protected
- * check drivers/cpufreq/cpufreq.c for its usage - Ashok Raj
- */
+#ifdef CONFIG_HOTPLUG_CPU
+static struct task_struct *lock_cpu_hotplug_owner;
+static int lock_cpu_hotplug_depth;
-int current_in_cpu_hotplug(void)
+static int __lock_cpu_hotplug(int interruptible)
{
- return (current->flags & PF_HOTPLUG_CPU);
+ int ret = 0;
+
+ if (lock_cpu_hotplug_owner != current) {
+ if (interruptible)
+ ret = down_interruptible(&cpucontrol);
+ else
+ down(&cpucontrol);
+ }
+
+ /*
+ * Set only if we succeed in locking
+ */
+ if (!ret) {
+ lock_cpu_hotplug_depth++;
+ lock_cpu_hotplug_owner = current;
+ }
+
+ return ret;
}
-EXPORT_SYMBOL_GPL(current_in_cpu_hotplug);
+void lock_cpu_hotplug(void)
+{
+ __lock_cpu_hotplug(0);
+}
+EXPORT_SYMBOL_GPL(lock_cpu_hotplug);
+void unlock_cpu_hotplug(void)
+{
+ if (--lock_cpu_hotplug_depth == 0) {
+ lock_cpu_hotplug_owner = NULL;
+ up(&cpucontrol);
+ }
+}
+EXPORT_SYMBOL_GPL(unlock_cpu_hotplug);
+
+int lock_cpu_hotplug_interruptible(void)
+{
+ return __lock_cpu_hotplug(1);
+}
+EXPORT_SYMBOL_GPL(lock_cpu_hotplug_interruptible);
+#endif /* CONFIG_HOTPLUG_CPU */
/* Need to know about CPUs going up/down? */
int register_cpu_notifier(struct notifier_block *nb)
{
int ret;
- if ((ret = down_interruptible(&cpucontrol)) != 0)
+ if ((ret = lock_cpu_hotplug_interruptible()) != 0)
return ret;
ret = notifier_chain_register(&cpu_chain, nb);
- up(&cpucontrol);
+ unlock_cpu_hotplug();
return ret;
}
EXPORT_SYMBOL(register_cpu_notifier);
void unregister_cpu_notifier(struct notifier_block *nb)
{
- down(&cpucontrol);
+ lock_cpu_hotplug();
notifier_chain_unregister(&cpu_chain, nb);
- up(&cpucontrol);
+ unlock_cpu_hotplug();
}
EXPORT_SYMBOL(unregister_cpu_notifier);
goto out;
}
- /*
- * Leave a trace in current->flags indicating we are already in
- * process of performing CPU hotplug. Callers can check if cpucontrol
- * is already acquired by current thread, and if so not cause
- * a dead lock by not acquiring the lock
- */
- current->flags |= PF_HOTPLUG_CPU;
err = notifier_call_chain(&cpu_chain, CPU_DOWN_PREPARE,
(void *)(long)cpu);
if (err == NOTIFY_BAD) {
out_allowed:
set_cpus_allowed(current, old_allowed);
out:
- current->flags &= ~PF_HOTPLUG_CPU;
unlock_cpu_hotplug();
return err;
}
int ret;
void *hcpu = (void *)(long)cpu;
- if ((ret = down_interruptible(&cpucontrol)) != 0)
+ if ((ret = lock_cpu_hotplug_interruptible()) != 0)
return ret;
if (cpu_online(cpu) || !cpu_present(cpu)) {
goto out;
}
- /*
- * Leave a trace in current->flags indicating we are already in
- * process of performing CPU hotplug.
- */
- current->flags |= PF_HOTPLUG_CPU;
ret = notifier_call_chain(&cpu_chain, CPU_UP_PREPARE, hcpu);
if (ret == NOTIFY_BAD) {
printk("%s: attempt to bring up CPU %u failed\n",
if (ret != 0)
notifier_call_chain(&cpu_chain, CPU_UP_CANCELED, hcpu);
out:
- current->flags &= ~PF_HOTPLUG_CPU;
- up(&cpucontrol);
+ unlock_cpu_hotplug();
return ret;
}
if (unlikely(p->ptrace & PT_PTRACED))
__ptrace_link(p, current->parent);
- cpuset_fork(p);
-
attach_pid(p, PIDTYPE_PID, p->pid);
attach_pid(p, PIDTYPE_TGID, p->tgid);
if (thread_group_leader(p)) {
__get_cpu_var(process_counts)++;
}
- proc_fork_connector(p);
if (!current->signal->tty && p->signal->tty)
p->signal->tty = NULL;
nr_threads++;
total_forks++;
write_unlock_irq(&tasklist_lock);
+ proc_fork_connector(p);
+ cpuset_fork(p);
retval = 0;
fork_out:
union cpu_time_count ret;
ret.sched = 0; /* high half always zero when .cpu used */
if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED) {
- ret.sched = tp->tv_sec * NSEC_PER_SEC + tp->tv_nsec;
+ ret.sched = (unsigned long long)tp->tv_sec * NSEC_PER_SEC + tp->tv_nsec;
} else {
ret.cpu = timespec_to_cputime(tp);
}
DECLARE_MUTEX(pm_sem);
-struct pm_ops * pm_ops = NULL;
+struct pm_ops *pm_ops;
suspend_disk_method_t pm_disk_mode = PM_DISK_SHUTDOWN;
/**
#endif
};
+static inline int valid_state(suspend_state_t state)
+{
+ /* Suspend-to-disk does not really need low-level support.
+ * It can work with reboot if needed. */
+ if (state == PM_SUSPEND_DISK)
+ return 1;
+
+ if (pm_ops && pm_ops->valid && !pm_ops->valid(state))
+ return 0;
+ return 1;
+}
+
/**
* enter_state - Do common work of entering low-power state.
{
int error;
- if (pm_ops && pm_ops->valid && !pm_ops->valid(state))
+ if (!valid_state(state))
return -ENODEV;
if (down_trylock(&pm_sem))
return -EBUSY;
char * s = buf;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (pm_states[i] && pm_ops && (!pm_ops->valid
- ||(pm_ops->valid && pm_ops->valid(i))))
- s += sprintf(s,"%s ",pm_states[i]);
+ if (pm_states[i] && valid_state(i))
+ s += sprintf(s,"%s ", pm_states[i]);
}
s += sprintf(s,"\n");
return (s - buf);
if (write) {
copy_to_user_page(vma, page, addr,
maddr + offset, buf, bytes);
- set_page_dirty_lock(page);
+ if (!PageCompound(page))
+ set_page_dirty_lock(page);
} else {
copy_from_user_page(vma, page, addr,
buf, maddr + offset, bytes);
if (!test_and_set_bit(0, &work->pending)) {
if (unlikely(is_single_threaded(wq)))
- cpu = 0;
+ cpu = any_online_cpu(cpu_online_map);
BUG_ON(!list_empty(&work->entry));
__queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
ret = 1;
int cpu = smp_processor_id();
if (unlikely(is_single_threaded(wq)))
- cpu = 0;
+ cpu = any_online_cpu(cpu_online_map);
__queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
}
might_sleep();
if (is_single_threaded(wq)) {
- /* Always use cpu 0's area. */
- flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, 0));
+ /* Always use first cpu's area. */
+ flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, any_online_cpu(cpu_online_map)));
} else {
int cpu;
lock_cpu_hotplug();
if (singlethread) {
INIT_LIST_HEAD(&wq->list);
- p = create_workqueue_thread(wq, 0);
+ p = create_workqueue_thread(wq, any_online_cpu(cpu_online_map));
if (!p)
destroy = 1;
else
/* We don't need the distraction of CPUs appearing and vanishing. */
lock_cpu_hotplug();
if (is_single_threaded(wq))
- cleanup_workqueue_thread(wq, 0);
+ cleanup_workqueue_thread(wq, any_online_cpu(cpu_online_map));
else {
for_each_online_cpu(cpu)
cleanup_workqueue_thread(wq, cpu);
if (size > max_chunk_size)
return 0;
- i = 0;
-
size = max(size, 1 << ALLOC_MIN_SHIFT);
- s = roundup_pow_of_two(size);
-
- j = i;
+ i = fls(size - 1);
+ s = 1 << i;
+ j = i -= ALLOC_MIN_SHIFT;
spin_lock_irqsave(&poolp->lock, flags);
while (!h[j].next) {
if (size > max_chunk_size)
return;
- i = 0;
-
size = max(size, 1 << ALLOC_MIN_SHIFT);
- s = roundup_pow_of_two(size);
+ i = fls(size - 1);
+ s = 1 << i;
+ i -= ALLOC_MIN_SHIFT;
a = ptr;
struct page *page = NULL;
if (pte_present(pte)) {
- unsigned long pfn = pte_pfn(pte);
- flush_cache_page(vma, addr, pfn);
+ flush_cache_page(vma, addr, pte_pfn(pte));
pte = ptep_clear_flush(vma, addr, ptep);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, pte, addr);
- goto out;
+ page = vm_normal_page(vma, addr, pte);
+ if (page) {
+ if (pte_dirty(pte))
+ set_page_dirty(page);
+ page_remove_rmap(page);
+ page_cache_release(page);
}
- page = pfn_to_page(pfn);
- if (pte_dirty(pte))
- set_page_dirty(page);
- page_remove_rmap(page);
- page_cache_release(page);
} else {
if (!pte_file(pte))
free_swap_and_cache(pte_to_swp_entry(pte));
pte_clear(mm, addr, ptep);
}
-out:
return !!page;
}
pgoff_t size;
int err = -ENOMEM;
pte_t *pte;
- pmd_t *pmd;
- pud_t *pud;
- pgd_t *pgd;
pte_t pte_val;
spinlock_t *ptl;
- BUG_ON(vma->vm_flags & VM_UNPAGED);
-
- pgd = pgd_offset(mm, addr);
- pud = pud_alloc(mm, pgd, addr);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, addr);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
+ pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
{
int err = -ENOMEM;
pte_t *pte;
- pmd_t *pmd;
- pud_t *pud;
- pgd_t *pgd;
pte_t pte_val;
spinlock_t *ptl;
- BUG_ON(vma->vm_flags & VM_UNPAGED);
-
- pgd = pgd_offset(mm, addr);
- pud = pud_alloc(mm, pgd, addr);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, addr);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
+ pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
unsigned long start, unsigned long end)
{
*prev = vma;
- if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_UNPAGED))
+ if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_PFNMAP))
return -EINVAL;
if (unlikely(vma->vm_flags & VM_NONLINEAR)) {
}
/*
- * This function is called to print an error when a pte in a
- * !VM_UNPAGED region is found pointing to an invalid pfn (which
- * is an error.
+ * This function is called to print an error when a bad pte
+ * is found. For example, we might have a PFN-mapped pte in
+ * a region that doesn't allow it.
*
* The calling function must still handle the error.
*/
}
/*
- * page_is_anon applies strict checks for an anonymous page belonging to
- * this vma at this address. It is used on VM_UNPAGED vmas, which are
- * usually populated with shared originals (which must not be counted),
- * but occasionally contain private COWed copies (when !VM_SHARED, or
- * perhaps via ptrace when VM_SHARED). An mmap of /dev/mem might window
- * free pages, pages from other processes, or from other parts of this:
- * it's tricky, but try not to be deceived by foreign anonymous pages.
+ * This function gets the "struct page" associated with a pte.
+ *
+ * NOTE! Some mappings do not have "struct pages". A raw PFN mapping
+ * will have each page table entry just pointing to a raw page frame
+ * number, and as far as the VM layer is concerned, those do not have
+ * pages associated with them - even if the PFN might point to memory
+ * that otherwise is perfectly fine and has a "struct page".
+ *
+ * The way we recognize those mappings is through the rules set up
+ * by "remap_pfn_range()": the vma will have the VM_PFNMAP bit set,
+ * and the vm_pgoff will point to the first PFN mapped: thus every
+ * page that is a raw mapping will always honor the rule
+ *
+ * pfn_of_page == vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT)
+ *
+ * and if that isn't true, the page has been COW'ed (in which case it
+ * _does_ have a "struct page" associated with it even if it is in a
+ * VM_PFNMAP range).
*/
-static inline int page_is_anon(struct page *page,
- struct vm_area_struct *vma, unsigned long addr)
+struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
{
- return page && PageAnon(page) && page_mapped(page) &&
- page_address_in_vma(page, vma) == addr;
+ unsigned long pfn = pte_pfn(pte);
+
+ if (vma->vm_flags & VM_PFNMAP) {
+ unsigned long off = (addr - vma->vm_start) >> PAGE_SHIFT;
+ if (pfn == vma->vm_pgoff + off)
+ return NULL;
+ }
+
+ /*
+ * Add some anal sanity checks for now. Eventually,
+ * we should just do "return pfn_to_page(pfn)", but
+ * in the meantime we check that we get a valid pfn,
+ * and that the resulting page looks ok.
+ *
+ * Remove this test eventually!
+ */
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, pte, addr);
+ return NULL;
+ }
+
+ /*
+ * NOTE! We still have PageReserved() pages in the page
+ * tables.
+ *
+ * The PAGE_ZERO() pages and various VDSO mappings can
+ * cause them to exist.
+ */
+ return pfn_to_page(pfn);
}
/*
unsigned long vm_flags = vma->vm_flags;
pte_t pte = *src_pte;
struct page *page;
- unsigned long pfn;
/* pte contains position in swap or file, so copy. */
if (unlikely(!pte_present(pte))) {
goto out_set_pte;
}
- pfn = pte_pfn(pte);
- page = pfn_valid(pfn)? pfn_to_page(pfn): NULL;
-
- if (unlikely(vm_flags & VM_UNPAGED))
- if (!page_is_anon(page, vma, addr))
- goto out_set_pte;
-
- /*
- * If the pte points outside of valid memory but
- * the region is not VM_UNPAGED, we have a problem.
- */
- if (unlikely(!page)) {
- print_bad_pte(vma, pte, addr);
- goto out_set_pte; /* try to do something sane */
- }
-
/*
* If it's a COW mapping, write protect it both
* in the parent and the child
if (vm_flags & VM_SHARED)
pte = pte_mkclean(pte);
pte = pte_mkold(pte);
- get_page(page);
- page_dup_rmap(page);
- rss[!!PageAnon(page)]++;
+
+ page = vm_normal_page(vma, addr, pte);
+ if (page) {
+ get_page(page);
+ page_dup_rmap(page);
+ rss[!!PageAnon(page)]++;
+ }
out_set_pte:
set_pte_at(dst_mm, addr, dst_pte, pte);
* readonly mappings. The tradeoff is that copy_page_range is more
* efficient than faulting.
*/
- if (!(vma->vm_flags & (VM_HUGETLB|VM_NONLINEAR|VM_UNPAGED))) {
+ if (!(vma->vm_flags & (VM_HUGETLB|VM_NONLINEAR|VM_PFNMAP))) {
if (!vma->anon_vma)
return 0;
}
}
if (pte_present(ptent)) {
struct page *page;
- unsigned long pfn;
(*zap_work) -= PAGE_SIZE;
- pfn = pte_pfn(ptent);
- page = pfn_valid(pfn)? pfn_to_page(pfn): NULL;
-
- if (unlikely(vma->vm_flags & VM_UNPAGED)) {
- if (!page_is_anon(page, vma, addr))
- page = NULL;
- } else if (unlikely(!page))
- print_bad_pte(vma, ptent, addr);
-
+ page = vm_normal_page(vma, addr, ptent);
if (unlikely(details) && page) {
/*
* unmap_shared_mapping_pages() wants to
/*
* Do a quick page-table lookup for a single page.
*/
-struct page *follow_page(struct mm_struct *mm, unsigned long address,
+struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int flags)
{
pgd_t *pgd;
pmd_t *pmd;
pte_t *ptep, pte;
spinlock_t *ptl;
- unsigned long pfn;
struct page *page;
+ struct mm_struct *mm = vma->vm_mm;
page = follow_huge_addr(mm, address, flags & FOLL_WRITE);
if (!IS_ERR(page)) {
goto unlock;
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
- pfn = pte_pfn(pte);
- if (!pfn_valid(pfn))
+ page = vm_normal_page(vma, address, pte);
+ if (unlikely(!page))
goto unlock;
- page = pfn_to_page(pfn);
if (flags & FOLL_GET)
get_page(page);
if (flags & FOLL_TOUCH) {
return i ? : -EFAULT;
}
if (pages) {
- pages[i] = pte_page(*pte);
- get_page(pages[i]);
+ struct page *page = vm_normal_page(gate_vma, start, *pte);
+ pages[i] = page;
+ if (page)
+ get_page(page);
}
pte_unmap(pte);
if (vmas)
foll_flags |= FOLL_WRITE;
cond_resched();
- while (!(page = follow_page(mm, start, foll_flags))) {
+ while (!(page = follow_page(vma, start, foll_flags))) {
int ret;
ret = __handle_mm_fault(mm, vma, start,
foll_flags & FOLL_WRITE);
return err;
}
+pte_t * fastcall get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl)
+{
+ pgd_t * pgd = pgd_offset(mm, addr);
+ pud_t * pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ pmd_t * pmd = pmd_alloc(mm, pud, addr);
+ if (pmd)
+ return pte_alloc_map_lock(mm, pmd, addr, ptl);
+ }
+ return NULL;
+}
+
+/*
+ * This is the old fallback for page remapping.
+ *
+ * For historical reasons, it only allows reserved pages. Only
+ * old drivers should use this, and they needed to mark their
+ * pages reserved for the old functions anyway.
+ */
+static int insert_page(struct mm_struct *mm, unsigned long addr, struct page *page, pgprot_t prot)
+{
+ int retval;
+ pte_t *pte;
+ spinlock_t *ptl;
+
+ retval = -EINVAL;
+ if (PageAnon(page))
+ goto out;
+ retval = -ENOMEM;
+ flush_dcache_page(page);
+ pte = get_locked_pte(mm, addr, &ptl);
+ if (!pte)
+ goto out;
+ retval = -EBUSY;
+ if (!pte_none(*pte))
+ goto out_unlock;
+
+ /* Ok, finally just insert the thing.. */
+ get_page(page);
+ inc_mm_counter(mm, file_rss);
+ page_add_file_rmap(page);
+ set_pte_at(mm, addr, pte, mk_pte(page, prot));
+
+ retval = 0;
+out_unlock:
+ pte_unmap_unlock(pte, ptl);
+out:
+ return retval;
+}
+
+/*
+ * This allows drivers to insert individual pages they've allocated
+ * into a user vma.
+ *
+ * The page has to be a nice clean _individual_ kernel allocation.
+ * If you allocate a compound page, you need to have marked it as
+ * such (__GFP_COMP), or manually just split the page up yourself
+ * (which is mainly an issue of doing "set_page_count(page, 1)" for
+ * each sub-page, and then freeing them one by one when you free
+ * them rather than freeing it as a compound page).
+ *
+ * NOTE! Traditionally this was done with "remap_pfn_range()" which
+ * took an arbitrary page protection parameter. This doesn't allow
+ * that. Your vma protection will have to be set up correctly, which
+ * means that if you want a shared writable mapping, you'd better
+ * ask for a shared writable mapping!
+ *
+ * The page does not need to be reserved.
+ */
+int vm_insert_page(struct vm_area_struct *vma, unsigned long addr, struct page *page)
+{
+ if (addr < vma->vm_start || addr >= vma->vm_end)
+ return -EFAULT;
+ if (!page_count(page))
+ return -EINVAL;
+ return insert_page(vma->vm_mm, addr, page, vma->vm_page_prot);
+}
+EXPORT_SYMBOL_GPL(vm_insert_page);
+
+/*
+ * Somebody does a pfn remapping that doesn't actually work as a vma.
+ *
+ * Do it as individual pages instead, and warn about it. It's bad form,
+ * and very inefficient.
+ */
+static int incomplete_pfn_remap(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ unsigned long pfn, pgprot_t prot)
+{
+ static int warn = 10;
+ struct page *page;
+ int retval;
+
+ if (!(vma->vm_flags & VM_INCOMPLETE)) {
+ if (warn) {
+ warn--;
+ printk("%s does an incomplete pfn remapping", current->comm);
+ dump_stack();
+ }
+ }
+ vma->vm_flags |= VM_INCOMPLETE | VM_IO | VM_RESERVED;
+
+ if (start < vma->vm_start || end > vma->vm_end)
+ return -EINVAL;
+
+ if (!pfn_valid(pfn))
+ return -EINVAL;
+
+ page = pfn_to_page(pfn);
+ if (!PageReserved(page))
+ return -EINVAL;
+
+ retval = 0;
+ while (start < end) {
+ retval = insert_page(vma->vm_mm, start, page, prot);
+ if (retval < 0)
+ break;
+ start += PAGE_SIZE;
+ page++;
+ }
+ return retval;
+}
+
/*
* maps a range of physical memory into the requested pages. the old
* mappings are removed. any references to nonexistent pages results
struct mm_struct *mm = vma->vm_mm;
int err;
+ if (addr != vma->vm_start || end != vma->vm_end)
+ return incomplete_pfn_remap(vma, addr, end, pfn, prot);
+
/*
* Physically remapped pages are special. Tell the
* rest of the world about it:
* in 2.6 the LRU scan won't even find its pages, so this
* flag means no more than count its pages in reserved_vm,
* and omit it from core dump, even when VM_IO turned off.
- * VM_UNPAGED tells the core MM not to "manage" these pages
- * (e.g. refcount, mapcount, try to swap them out): in
- * particular, zap_pte_range does not try to free them.
+ * VM_PFNMAP tells the core MM that the base pages are just
+ * raw PFN mappings, and do not have a "struct page" associated
+ * with them.
*/
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = pfn;
BUG_ON(addr >= end);
pfn -= addr >> PAGE_SHIFT;
return pte;
}
+static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va)
+{
+ /*
+ * If the source page was a PFN mapping, we don't have
+ * a "struct page" for it. We do a best-effort copy by
+ * just copying from the original user address. If that
+ * fails, we just zero-fill it. Live with it.
+ */
+ if (unlikely(!src)) {
+ void *kaddr = kmap_atomic(dst, KM_USER0);
+ void __user *uaddr = (void __user *)(va & PAGE_MASK);
+
+ /*
+ * This really shouldn't fail, because the page is there
+ * in the page tables. But it might just be unreadable,
+ * in which case we just give up and fill the result with
+ * zeroes.
+ */
+ if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE))
+ memset(kaddr, 0, PAGE_SIZE);
+ kunmap_atomic(kaddr, KM_USER0);
+ return;
+
+ }
+ copy_user_highpage(dst, src, va);
+}
+
/*
* This routine handles present pages, when users try to write
* to a shared page. It is done by copying the page to a new address
unsigned long address, pte_t *page_table, pmd_t *pmd,
spinlock_t *ptl, pte_t orig_pte)
{
- struct page *old_page, *src_page, *new_page;
- unsigned long pfn = pte_pfn(orig_pte);
+ struct page *old_page, *new_page;
pte_t entry;
int ret = VM_FAULT_MINOR;
- if (unlikely(!pfn_valid(pfn))) {
- /*
- * Page table corrupted: show pte and kill process.
- * Or it's an attempt to COW an out-of-map VM_UNPAGED
- * entry, which copy_user_highpage does not support.
- */
- print_bad_pte(vma, orig_pte, address);
- ret = VM_FAULT_OOM;
- goto unlock;
- }
- old_page = pfn_to_page(pfn);
- src_page = old_page;
-
- if (unlikely(vma->vm_flags & VM_UNPAGED))
- if (!page_is_anon(old_page, vma, address)) {
- old_page = NULL;
- goto gotten;
- }
+ old_page = vm_normal_page(vma, address, orig_pte);
+ if (!old_page)
+ goto gotten;
if (PageAnon(old_page) && !TestSetPageLocked(old_page)) {
int reuse = can_share_swap_page(old_page);
unlock_page(old_page);
if (reuse) {
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
ptep_set_access_flags(vma, address, page_table, entry, 1);
if (unlikely(anon_vma_prepare(vma)))
goto oom;
- if (src_page == ZERO_PAGE(address)) {
+ if (old_page == ZERO_PAGE(address)) {
new_page = alloc_zeroed_user_highpage(vma, address);
if (!new_page)
goto oom;
new_page = alloc_page_vma(GFP_HIGHUSER, vma, address);
if (!new_page)
goto oom;
- copy_user_highpage(new_page, src_page, address);
+ cow_user_page(new_page, old_page, address);
}
/*
}
} else
inc_mm_counter(mm, anon_rss);
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = mk_pte(new_page, vma->vm_page_prot);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
ptep_establish(vma, address, page_table, entry);
spinlock_t *ptl;
pte_t entry;
- /*
- * A VM_UNPAGED vma will normally be filled with present ptes
- * by remap_pfn_range, and never arrive here; but it might have
- * holes, or if !VM_DONTEXPAND, mremap might have expanded it.
- * It's weird enough handling anon pages in unpaged vmas, we do
- * not want to worry about ZERO_PAGEs too (it may or may not
- * matter if their counts wrap): just give them anon pages.
- */
-
- if (write_access || (vma->vm_flags & VM_UNPAGED)) {
+ if (write_access) {
/* Allocate our own private page. */
pte_unmap(page_table);
int anon = 0;
pte_unmap(page_table);
- BUG_ON(vma->vm_flags & VM_UNPAGED);
+ BUG_ON(vma->vm_flags & VM_PFNMAP);
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
spin_unlock(&mm->page_table_lock);
return 0;
}
+#else
+/* Workaround for gcc 2.96 */
+int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
+{
+ return 0;
+}
#endif /* __PAGETABLE_PUD_FOLDED */
#ifndef __PAGETABLE_PMD_FOLDED
spin_unlock(&mm->page_table_lock);
return 0;
}
+#else
+/* Workaround for gcc 2.96 */
+int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
+{
+ return 0;
+}
#endif /* __PAGETABLE_PMD_FOLDED */
int make_pages_present(unsigned long addr, unsigned long end)
orig_pte = pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
- unsigned long pfn;
+ struct page *page;
unsigned int nid;
if (!pte_present(*pte))
continue;
- pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn)) {
- print_bad_pte(vma, *pte, addr);
+ page = vm_normal_page(vma, addr, *pte);
+ if (!page)
continue;
- }
- nid = pfn_to_nid(pfn);
+ nid = page_to_nid(page);
if (!node_isset(nid, *nodes))
break;
} while (pte++, addr += PAGE_SIZE, addr != end);
first = find_vma(mm, start);
if (!first)
return ERR_PTR(-EFAULT);
- if (first->vm_flags & VM_UNPAGED)
- return ERR_PTR(-EACCES);
prev = NULL;
for (vma = first; vma && vma->vm_start < end; vma = vma->vm_next) {
if (!vma->vm_next && vma->vm_end < end)
again:
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
- unsigned long pfn;
struct page *page;
if (progress >= 64) {
continue;
if (!pte_maybe_dirty(*pte))
continue;
- pfn = pte_pfn(*pte);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, *pte, addr);
+ page = vm_normal_page(vma, addr, *pte);
+ if (!page)
continue;
- }
- page = pfn_to_page(pfn);
-
if (ptep_clear_flush_dirty(vma, addr, pte) ||
page_test_and_clear_dirty(page))
set_page_dirty(page);
/* For hugepages we can't go walking the page table normally,
* but that's ok, hugetlbfs is memory based, so we don't need
* to do anything more on an msync().
- * Can't do anything with VM_UNPAGED regions either.
*/
- if (vma->vm_flags & (VM_HUGETLB|VM_UNPAGED))
+ if (vma->vm_flags & VM_HUGETLB)
return;
BUG_ON(addr >= end);
EXPORT_SYMBOL(find_vma);
-struct page *follow_page(struct mm_struct *mm, unsigned long address,
+struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int foll_flags)
{
return NULL;
}
#define ALLOC_NO_WATERMARKS 0x01 /* don't check watermarks at all */
-#define ALLOC_HARDER 0x02 /* try to alloc harder */
-#define ALLOC_HIGH 0x04 /* __GFP_HIGH set */
-#define ALLOC_CPUSET 0x08 /* check for correct cpuset */
+#define ALLOC_WMARK_MIN 0x02 /* use pages_min watermark */
+#define ALLOC_WMARK_LOW 0x04 /* use pages_low watermark */
+#define ALLOC_WMARK_HIGH 0x08 /* use pages_high watermark */
+#define ALLOC_HARDER 0x10 /* try to alloc harder */
+#define ALLOC_HIGH 0x20 /* __GFP_HIGH set */
+#define ALLOC_CPUSET 0x40 /* check for correct cpuset */
/*
* Return 1 if free pages are above 'mark'. This takes into account the order
continue;
if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
- if (!zone_watermark_ok(*z, order, (*z)->pages_low,
+ unsigned long mark;
+ if (alloc_flags & ALLOC_WMARK_MIN)
+ mark = (*z)->pages_min;
+ else if (alloc_flags & ALLOC_WMARK_LOW)
+ mark = (*z)->pages_low;
+ else
+ mark = (*z)->pages_high;
+ if (!zone_watermark_ok(*z, order, mark,
classzone_idx, alloc_flags))
continue;
}
}
page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order,
- zonelist, ALLOC_CPUSET);
+ zonelist, ALLOC_WMARK_LOW|ALLOC_CPUSET);
if (page)
goto got_pg;
* cannot run direct reclaim, or if the caller has realtime scheduling
* policy.
*/
- alloc_flags = 0;
+ alloc_flags = ALLOC_WMARK_MIN;
if ((unlikely(rt_task(p)) && !in_interrupt()) || !wait)
alloc_flags |= ALLOC_HARDER;
if (gfp_mask & __GFP_HIGH)
* under heavy pressure.
*/
page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order,
- zonelist, ALLOC_CPUSET);
+ zonelist, ALLOC_WMARK_HIGH|ALLOC_CPUSET);
if (page)
goto got_pg;
/*
* At what user virtual address is page expected in vma? checking that the
* page matches the vma: currently only used on anon pages, by unuse_vma;
- * and by extraordinary checks on anon pages in VM_UNPAGED vmas, taking
- * care that an mmap of /dev/mem might window free and foreign pages.
*/
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
* repeatedly from either page_referenced_anon or page_referenced_file.
*/
static int page_referenced_one(struct page *page,
- struct vm_area_struct *vma, unsigned int *mapcount, int ignore_token)
+ struct vm_area_struct *vma, unsigned int *mapcount)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
/* Pretend the page is referenced if the task has the
swap token and is in the middle of a page fault. */
- if (mm != current->mm && !ignore_token && has_swap_token(mm) &&
+ if (mm != current->mm && has_swap_token(mm) &&
rwsem_is_locked(&mm->mmap_sem))
referenced++;
return referenced;
}
-static int page_referenced_anon(struct page *page, int ignore_token)
+static int page_referenced_anon(struct page *page)
{
unsigned int mapcount;
struct anon_vma *anon_vma;
mapcount = page_mapcount(page);
list_for_each_entry(vma, &anon_vma->head, anon_vma_node) {
- referenced += page_referenced_one(page, vma, &mapcount,
- ignore_token);
+ referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
break;
}
*
* This function is only called from page_referenced for object-based pages.
*/
-static int page_referenced_file(struct page *page, int ignore_token)
+static int page_referenced_file(struct page *page)
{
unsigned int mapcount;
struct address_space *mapping = page->mapping;
referenced++;
break;
}
- referenced += page_referenced_one(page, vma, &mapcount,
- ignore_token);
+ referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
break;
}
* Quick test_and_clear_referenced for all mappings to a page,
* returns the number of ptes which referenced the page.
*/
-int page_referenced(struct page *page, int is_locked, int ignore_token)
+int page_referenced(struct page *page, int is_locked)
{
int referenced = 0;
- if (!swap_token_default_timeout)
- ignore_token = 1;
-
if (page_test_and_clear_young(page))
referenced++;
if (page_mapped(page) && page->mapping) {
if (PageAnon(page))
- referenced += page_referenced_anon(page, ignore_token);
+ referenced += page_referenced_anon(page);
else if (is_locked)
- referenced += page_referenced_file(page, ignore_token);
+ referenced += page_referenced_file(page);
else if (TestSetPageLocked(page))
referenced++;
else {
if (page->mapping)
- referenced += page_referenced_file(page,
- ignore_token);
+ referenced += page_referenced_file(page);
unlock_page(page);
}
}
struct page *page;
unsigned long address;
unsigned long end;
- unsigned long pfn;
address = (vma->vm_start + cursor) & CLUSTER_MASK;
end = address + CLUSTER_SIZE;
for (; address < end; pte++, address += PAGE_SIZE) {
if (!pte_present(*pte))
continue;
-
- pfn = pte_pfn(*pte);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, *pte, address);
- continue;
- }
-
- page = pfn_to_page(pfn);
- BUG_ON(PageAnon(page));
+ page = vm_normal_page(vma, address, *pte);
+ BUG_ON(!page || PageAnon(page));
if (ptep_clear_flush_young(vma, address, pte))
continue;
/* Nuke the page table entry. */
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(*pte));
pteval = ptep_clear_flush(vma, address, pte);
/* If nonlinear, store the file page offset in the pte. */
/* We have the token. Let others know we still need it. */
if (has_swap_token(current->mm)) {
current->mm->recent_pagein = 1;
+ if (unlikely(!swap_token_default_timeout))
+ disable_swap_token();
return;
}
if (time_after(jiffies, swap_token_check)) {
- /* Can't get swapout protection if we exceed our RSS limit. */
- // if (current->mm->rss > current->mm->rlimit_rss)
- // return;
+ if (!swap_token_default_timeout) {
+ swap_token_check = jiffies + SWAP_TOKEN_CHECK_INTERVAL;
+ return;
+ }
/* ... or if we recently held the token. */
if (time_before(jiffies, current->mm->swap_token_time))
{
spin_lock(&swap_token_lock);
if (likely(mm == swap_token_mm)) {
+ mm->swap_token_time = jiffies + SWAP_TOKEN_CHECK_INTERVAL;
swap_token_mm = &init_mm;
swap_token_check = jiffies;
}
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
+ unsigned long max_pass = (*shrinker->shrinker)(0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
- delta *= (*shrinker->shrinker)(0, gfp_mask);
+ delta *= max_pass;
do_div(delta, lru_pages + 1);
shrinker->nr += delta;
- if (shrinker->nr < 0)
- shrinker->nr = LONG_MAX; /* It wrapped! */
+ if (shrinker->nr < 0) {
+ printk(KERN_ERR "%s: nr=%ld\n",
+ __FUNCTION__, shrinker->nr);
+ shrinker->nr = max_pass;
+ }
+
+ /*
+ * Avoid risking looping forever due to too large nr value:
+ * never try to free more than twice the estimate number of
+ * freeable entries.
+ */
+ if (shrinker->nr > max_pass * 2)
+ shrinker->nr = max_pass * 2;
total_scan = shrinker->nr;
shrinker->nr = 0;
if (PageWriteback(page))
goto keep_locked;
- referenced = page_referenced(page, 1, sc->priority <= 0);
+ referenced = page_referenced(page, 1);
/* In active use or really unfreeable? Activate it. */
if (referenced && page_mapping_inuse(page))
goto activate_locked;
if (page_mapped(page)) {
if (!reclaim_mapped ||
(total_swap_pages == 0 && PageAnon(page)) ||
- page_referenced(page, 0, sc->priority <= 0)) {
+ page_referenced(page, 0)) {
list_add(&page->lru, &l_active);
continue;
}
sc.nr_reclaimed = 0;
sc.priority = priority;
sc.swap_cluster_max = SWAP_CLUSTER_MAX;
+ if (!priority)
+ disable_swap_token();
shrink_caches(zones, &sc);
shrink_slab(sc.nr_scanned, gfp_mask, lru_pages);
if (reclaim_state) {
int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */
unsigned long lru_pages = 0;
+ /* The swap token gets in the way of swapout... */
+ if (!priority)
+ disable_swap_token();
+
all_zones_ok = 1;
if (nr_pages == 0) {
sc.nr_reclaimed = 0;
/* scan at the highest priority */
sc.priority = 0;
+ disable_swap_token();
if (nr_pages > SWAP_CLUSTER_MAX)
sc.swap_cluster_max = nr_pages;
*/
-int atm_pcr_goal(struct atm_trafprm *tp)
+int atm_pcr_goal(const struct atm_trafprm *tp)
{
- if (tp->pcr && tp->pcr != ATM_MAX_PCR) return -tp->pcr;
- if (tp->min_pcr && !tp->pcr) return tp->min_pcr;
- if (tp->max_pcr != ATM_MAX_PCR) return -tp->max_pcr;
+ if (tp->pcr && tp->pcr != ATM_MAX_PCR)
+ return -tp->pcr;
+ if (tp->min_pcr && !tp->pcr)
+ return tp->min_pcr;
+ if (tp->max_pcr != ATM_MAX_PCR)
+ return -tp->max_pcr;
return 0;
}
EXPORT_SYMBOL(vcc_release_async);
+void atm_dev_release_vccs(struct atm_dev *dev)
+{
+ int i;
+
+ write_lock_irq(&vcc_sklist_lock);
+ for (i = 0; i < VCC_HTABLE_SIZE; i++) {
+ struct hlist_head *head = &vcc_hash[i];
+ struct hlist_node *node, *tmp;
+ struct sock *s;
+ struct atm_vcc *vcc;
+
+ sk_for_each_safe(s, node, tmp, head) {
+ vcc = atm_sk(s);
+ if (vcc->dev == dev) {
+ vcc_release_async(vcc, -EPIPE);
+ sk_del_node_init(s);
+ }
+ }
+ }
+ write_unlock_irq(&vcc_sklist_lock);
+}
+
+
static int adjust_tp(struct atm_trafprm *tp,unsigned char aal)
{
int max_sdu;
return -EINVAL;
if (vci > 0 && vci < ATM_NOT_RSV_VCI && !capable(CAP_NET_BIND_SERVICE))
return -EPERM;
- error = 0;
+ error = -ENODEV;
if (!try_module_get(dev->ops->owner))
- return -ENODEV;
+ return error;
vcc->dev = dev;
write_lock_irq(&vcc_sklist_lock);
- if ((error = find_ci(vcc, &vpi, &vci))) {
+ if (test_bit(ATM_DF_REMOVED, &dev->flags) ||
+ (error = find_ci(vcc, &vpi, &vci))) {
write_unlock_irq(&vcc_sklist_lock);
goto fail_module_put;
}
if (vcc->qos.txtp.traffic_class == ATM_ANYCLASS ||
vcc->qos.rxtp.traffic_class == ATM_ANYCLASS)
return -EINVAL;
- if (itf != ATM_ITF_ANY) {
- dev = atm_dev_lookup(itf);
- if (!dev)
- return -ENODEV;
- error = __vcc_connect(vcc, dev, vpi, vci);
- if (error) {
- atm_dev_put(dev);
- return error;
- }
+ if (likely(itf != ATM_ITF_ANY)) {
+ dev = try_then_request_module(atm_dev_lookup(itf), "atm-device-%d", itf);
} else {
- struct list_head *p, *next;
-
dev = NULL;
- spin_lock(&atm_dev_lock);
- list_for_each_safe(p, next, &atm_devs) {
- dev = list_entry(p, struct atm_dev, dev_list);
+ down(&atm_dev_mutex);
+ if (!list_empty(&atm_devs)) {
+ dev = list_entry(atm_devs.next, struct atm_dev, dev_list);
atm_dev_hold(dev);
- spin_unlock(&atm_dev_lock);
- if (!__vcc_connect(vcc, dev, vpi, vci))
- break;
- atm_dev_put(dev);
- dev = NULL;
- spin_lock(&atm_dev_lock);
}
- spin_unlock(&atm_dev_lock);
- if (!dev)
- return -ENODEV;
+ up(&atm_dev_mutex);
+ }
+ if (!dev)
+ return -ENODEV;
+ error = __vcc_connect(vcc, dev, vpi, vci);
+ if (error) {
+ atm_dev_put(dev);
+ return error;
}
if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC)
set_bit(ATM_VF_PARTIAL,&vcc->flags);
/* SVC */
int svc_change_qos(struct atm_vcc *vcc,struct atm_qos *qos);
+void atm_dev_release_vccs(struct atm_dev *dev);
+
#endif
LIST_HEAD(atm_devs);
-DEFINE_SPINLOCK(atm_dev_lock);
+DECLARE_MUTEX(atm_dev_mutex);
static struct atm_dev *__alloc_atm_dev(const char *type)
{
list_for_each(p, &atm_devs) {
dev = list_entry(p, struct atm_dev, dev_list);
- if ((dev->ops) && (dev->number == number)) {
+ if (dev->number == number) {
atm_dev_hold(dev);
return dev;
}
{
struct atm_dev *dev;
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
dev = __atm_dev_lookup(number);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return dev;
}
+
struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
int number, unsigned long *flags)
{
type);
return NULL;
}
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
if (number != -1) {
if ((inuse = __atm_dev_lookup(number))) {
atm_dev_put(inuse);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
kfree(dev);
return NULL;
}
memset(&dev->flags, 0, sizeof(dev->flags));
memset(&dev->stats, 0, sizeof(dev->stats));
atomic_set(&dev->refcnt, 1);
- list_add_tail(&dev->dev_list, &atm_devs);
- spin_unlock(&atm_dev_lock);
if (atm_proc_dev_register(dev) < 0) {
printk(KERN_ERR "atm_dev_register: "
"atm_proc_dev_register failed for dev %s\n",
type);
- spin_lock(&atm_dev_lock);
- list_del(&dev->dev_list);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
kfree(dev);
return NULL;
}
+ list_add_tail(&dev->dev_list, &atm_devs);
+ up(&atm_dev_mutex);
return dev;
}
void atm_dev_deregister(struct atm_dev *dev)
{
- unsigned long warning_time;
+ BUG_ON(test_bit(ATM_DF_REMOVED, &dev->flags));
+ set_bit(ATM_DF_REMOVED, &dev->flags);
+
+ /*
+ * if we remove current device from atm_devs list, new device
+ * with same number can appear, such we need deregister proc,
+ * release async all vccs and remove them from vccs list too
+ */
+ down(&atm_dev_mutex);
+ list_del(&dev->dev_list);
+ up(&atm_dev_mutex);
+ atm_dev_release_vccs(dev);
atm_proc_dev_deregister(dev);
- spin_lock(&atm_dev_lock);
- list_del(&dev->dev_list);
- spin_unlock(&atm_dev_lock);
-
- warning_time = jiffies;
- while (atomic_read(&dev->refcnt) != 1) {
- msleep(250);
- if ((jiffies - warning_time) > 10 * HZ) {
- printk(KERN_EMERG "atm_dev_deregister: waiting for "
- "dev %d to become free. Usage count = %d\n",
- dev->number, atomic_read(&dev->refcnt));
- warning_time = jiffies;
- }
- }
-
- kfree(dev);
-}
-
-void shutdown_atm_dev(struct atm_dev *dev)
-{
- if (atomic_read(&dev->refcnt) > 1) {
- set_bit(ATM_DF_CLOSE, &dev->flags);
- return;
- }
- if (dev->ops->dev_close)
- dev->ops->dev_close(dev);
- atm_dev_deregister(dev);
+ atm_dev_put(dev);
}
return -EFAULT;
if (get_user(len, &iobuf->length))
return -EFAULT;
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
list_for_each(p, &atm_devs)
size += sizeof(int);
if (size > len) {
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return -E2BIG;
}
tmp_buf = kmalloc(size, GFP_ATOMIC);
if (!tmp_buf) {
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return -ENOMEM;
}
tmp_p = tmp_buf;
dev = list_entry(p, struct atm_dev, dev_list);
*tmp_p++ = dev->number;
}
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
error = ((copy_to_user(buf, tmp_buf, size)) ||
put_user(size, &iobuf->length))
? -EFAULT : 0;
if (get_user(number, &sioc->number))
return -EFAULT;
- if (!(dev = atm_dev_lookup(number)))
+ if (!(dev = try_then_request_module(atm_dev_lookup(number),
+ "atm-device-%d", number)))
return -ENODEV;
switch (cmd) {
void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
{
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
return *pos ? dev_get_idx(*pos) : (void *) 1;
}
void atm_dev_seq_stop(struct seq_file *seq, void *v)
{
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
}
void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
EXPORT_SYMBOL(atm_dev_register);
EXPORT_SYMBOL(atm_dev_deregister);
EXPORT_SYMBOL(atm_dev_lookup);
-EXPORT_SYMBOL(shutdown_atm_dev);
extern struct list_head atm_devs;
-extern spinlock_t atm_dev_lock;
-
+extern struct semaphore atm_dev_mutex;
int atm_dev_ioctl(unsigned int cmd, void __user *arg);
struct sk_buff *skb = NULL;
struct nlmsghdr *nlh = NULL;
struct fib_result_nl *frn;
- int err;
u32 pid;
struct fib_table *tb;
- skb = skb_recv_datagram(sk, 0, 0, &err);
+ skb = skb_dequeue(&sk->sk_receive_queue);
nlh = (struct nlmsghdr *)skb->data;
+ if (skb->len < NLMSG_SPACE(0) || skb->len < nlh->nlmsg_len ||
+ nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*frn))) {
+ kfree_skb(skb);
+ return;
+ }
frn = (struct fib_result_nl *) NLMSG_DATA(nlh);
tb = fib_get_table(frn->tb_id_in);
static unsigned fib_flag_trans(int type, u32 mask, struct fib_info *fi)
{
- static unsigned type2flags[RTN_MAX + 1] = {
+ static const unsigned type2flags[RTN_MAX + 1] = {
[7] = RTF_REJECT, [8] = RTF_REJECT,
};
unsigned flags = type2flags[type];
#define endfor_nexthops(fi) }
-static struct
+static const struct
{
int error;
u8 scope;
short error; /* This ICMP is classed as an error message */
};
-static struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
+static const struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
/*
* The ICMP socket(s). This is the most convenient way to flow control
/*
* This table is the definition of how we handle ICMP.
*/
-static struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
+static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
[ICMP_ECHOREPLY] = {
.output_entry = ICMP_MIB_OUTECHOREPS,
.input_entry = ICMP_MIB_INECHOREPS,
return 0;
}
-int __init ipgre_fb_tunnel_init(struct net_device *dev)
+static int __init ipgre_fb_tunnel_init(struct net_device *dev)
{
struct ip_tunnel *tunnel = (struct ip_tunnel*)dev->priv;
struct iphdr *iph = &tunnel->parms.iph;
return csum;
}
-inline int ip_ufo_append_data(struct sock *sk,
+static inline int ip_ufo_append_data(struct sock *sk,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int hh_len, int fragheaderlen,
* The drop rate array needs tuning for real environments.
* Called from timer bh only => no locking
*/
- static char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
+ static const char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
static char todrop_counter[9] = {0};
int i;
#define DAEMON_ARG_LEN (sizeof(struct ip_vs_daemon_user))
#define MAX_ARG_LEN SVCDEST_ARG_LEN
-static unsigned char set_arglen[SET_CMDID(IP_VS_SO_SET_MAX)+1] = {
+static const unsigned char set_arglen[SET_CMDID(IP_VS_SO_SET_MAX)+1] = {
[SET_CMDID(IP_VS_SO_SET_ADD)] = SERVICE_ARG_LEN,
[SET_CMDID(IP_VS_SO_SET_EDIT)] = SERVICE_ARG_LEN,
[SET_CMDID(IP_VS_SO_SET_DEL)] = SERVICE_ARG_LEN,
#define GET_TIMEOUT_ARG_LEN (sizeof(struct ip_vs_timeout_user))
#define GET_DAEMON_ARG_LEN (sizeof(struct ip_vs_daemon_user) * 2)
-static unsigned char get_arglen[GET_CMDID(IP_VS_SO_GET_MAX)+1] = {
+static const unsigned char get_arglen[GET_CMDID(IP_VS_SO_GET_MAX)+1] = {
[GET_CMDID(IP_VS_SO_GET_VERSION)] = 64,
[GET_CMDID(IP_VS_SO_GET_INFO)] = GET_INFO_ARG_LEN,
[GET_CMDID(IP_VS_SO_GET_SERVICES)] = GET_SERVICES_ARG_LEN,
#define TCP_DIR_OUTPUT 4
#define TCP_DIR_INPUT_ONLY 8
-static int tcp_state_off[IP_VS_DIR_LAST] = {
+static const int tcp_state_off[IP_VS_DIR_LAST] = {
[IP_VS_DIR_INPUT] = TCP_DIR_INPUT,
[IP_VS_DIR_OUTPUT] = TCP_DIR_OUTPUT,
[IP_VS_DIR_INPUT_ONLY] = TCP_DIR_INPUT_ONLY,
module_param(master_timeout, int, 0600);
MODULE_PARM_DESC(master_timeout, "timeout for the master connection");
-static char *conns[] = { "DATA ", "MESG ", "INDEX " };
+static const char *conns[] = { "DATA ", "MESG ", "INDEX " };
/* This is slow, but it's simple. --RR */
static char *amanda_buffer;
get_order(sizeof(struct list_head) * size));
}
-void ip_conntrack_flush()
+void ip_conntrack_flush(void)
{
/* This makes sure all current packets have passed through
netfilter framework. Roll on, two-stage module
return hash;
}
-int set_hashsize(const char *val, struct kernel_param *kp)
+static int set_hashsize(const char *val, struct kernel_param *kp)
{
int i, bucket, hashsize, vmalloced;
int old_vmalloced, old_size;
static int try_eprt(const char *, size_t, u_int32_t [], char);
static int try_epsv_response(const char *, size_t, u_int32_t [], char);
-static struct ftp_search {
+static const struct ftp_search {
enum ip_conntrack_dir dir;
const char *pattern;
size_t plen;
module_param(dcc_timeout, int, 0400);
MODULE_PARM_DESC(dcc_timeout, "timeout on for unestablished DCC channels");
-static char *dccprotos[] = { "SEND ", "CHAT ", "MOVE ", "TSEND ", "SCHAT " };
+static const char *dccprotos[] = { "SEND ", "CHAT ", "MOVE ", "TSEND ", "SCHAT " };
#define MINMATCHLEN 5
#if 0
const struct ip_conntrack_tuple *orig)
{
/* Add 1; spaces filled with 0. */
- static u_int8_t invmap[]
+ static const u_int8_t invmap[]
= { [ICMP_ECHO] = ICMP_ECHOREPLY + 1,
[ICMP_ECHOREPLY] = ICMP_ECHO + 1,
[ICMP_TIMESTAMP] = ICMP_TIMESTAMPREPLY + 1,
return NF_ACCEPT;
}
-static u_int8_t valid_new[] = {
+static const u_int8_t valid_new[] = {
[ICMP_ECHO] = 1,
[ICMP_TIMESTAMP] = 1,
[ICMP_INFO_REQUEST] = 1,
static unsigned long ip_ct_sctp_timeout_shutdown_recd = 300 SECS / 1000;
static unsigned long ip_ct_sctp_timeout_shutdown_ack_sent = 3 SECS;
-static unsigned long * sctp_timeouts[]
+static const unsigned long * sctp_timeouts[]
= { NULL, /* SCTP_CONNTRACK_NONE */
&ip_ct_sctp_timeout_closed, /* SCTP_CONNTRACK_CLOSED */
&ip_ct_sctp_timeout_cookie_wait, /* SCTP_CONNTRACK_COOKIE_WAIT */
*/
/* SCTP conntrack state transitions */
-static enum sctp_conntrack sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
+static const enum sctp_conntrack sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
{
/* ORIGINAL */
/* sNO, sCL, sCW, sCE, sES, sSS, sSR, sSA */
to ~13-30min depending on RTO. */
unsigned long ip_ct_tcp_timeout_max_retrans = 5 MINS;
-static unsigned long * tcp_timeouts[]
+static const unsigned long * tcp_timeouts[]
= { NULL, /* TCP_CONNTRACK_NONE */
&ip_ct_tcp_timeout_syn_sent, /* TCP_CONNTRACK_SYN_SENT, */
&ip_ct_tcp_timeout_syn_recv, /* TCP_CONNTRACK_SYN_RECV, */
* if they are invalid
* or we do not support the request (simultaneous open)
*/
-static enum tcp_conntrack tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
+static const enum tcp_conntrack tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
{
/* ORIGINAL */
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI */
* sCL -> sCL
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI */
-/*ack*/ { sIV, sIV, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
+/*ack*/ { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
/*
- * sSS -> sIV Might be a half-open connection.
+ * sSS -> sIG Might be a half-open connection.
* sSR -> sSR Might answer late resent SYN.
* sES -> sES :-)
* sFW -> sCW Normal close request answered by ACK.
#define TH_CWR 0x80
/* table of valid flag combinations - ECE and CWR are always valid */
-static u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] =
+static const u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] =
{
[TH_SYN] = 1,
[TH_SYN|TH_ACK] = 1,
switch (new_state) {
case TCP_CONNTRACK_IGNORE:
- /* Either SYN in ORIGINAL
- * or SYN/ACK in REPLY. */
+ /* Ignored packets:
+ *
+ * a) SYN in ORIGINAL
+ * b) SYN/ACK in REPLY
+ * c) ACK in reply direction after initial SYN in original.
+ */
if (index == TCP_SYNACK_SET
&& conntrack->proto.tcp.last_index == TCP_SYN_SET
&& conntrack->proto.tcp.last_dir != dir
}
case TCP_CONNTRACK_CLOSE:
if (index == TCP_RST_SET
- && test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)
- && conntrack->proto.tcp.last_index == TCP_SYN_SET
+ && ((test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)
+ && conntrack->proto.tcp.last_index == TCP_SYN_SET)
+ || (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
+ && conntrack->proto.tcp.last_index == TCP_ACK_SET))
&& ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
- /* RST sent to invalid SYN we had let trough
- * SYN was in window then, tear down connection.
+ /* RST sent to invalid SYN or ACK we had let trough
+ * at a) and c) above:
+ *
+ * a) SYN was in window then
+ * c) we hold a half-open connection.
+ *
+ * Delete our connection entry.
* We skip window checking, because packet might ACK
- * segments we ignored in the SYN. */
+ * segments we ignored. */
goto in_window;
}
/* Just fall trough */
static struct list_head *bysource;
#define MAX_IP_NAT_PROTO 256
-struct ip_nat_protocol *ip_nat_protos[MAX_IP_NAT_PROTO];
+static struct ip_nat_protocol *ip_nat_protos[MAX_IP_NAT_PROTO];
static inline struct ip_nat_protocol *
__ip_nat_proto_find(u_int8_t protonum)
return pos;
}
-static struct { char *name; get_info_t *get_info; } ipt_proc_entry[] =
+static const struct { char *name; get_info_t *get_info; } ipt_proc_entry[] =
{ { "ip_tables_names", ipt_get_tables },
{ "ip_tables_targets", ipt_get_targets },
{ "ip_tables_matches", ipt_get_matches },
}
case IPPROTO_ICMP: {
struct icmphdr _icmph, *ich;
- static size_t required_len[NR_ICMP_TYPES+1]
+ static const size_t required_len[NR_ICMP_TYPES+1]
= { [ICMP_ECHOREPLY] = 4,
[ICMP_DEST_UNREACH]
= 8 + sizeof(struct iphdr),
/* maxlen = 230+ 91 + 230 + 252 = 803 */
}
-struct nf_loginfo default_loginfo = {
+static struct nf_loginfo default_loginfo = {
.type = NF_LOG_TYPE_LOG,
.u = {
.log = {
}
if(info->seconds && info->hit_count) {
for(pkt_count = 0, hits_found = 0; pkt_count < ip_pkt_list_tot; pkt_count++) {
+ if(r_list[location].last_pkts[pkt_count] == 0) break;
if(time_before_eq(now,r_list[location].last_pkts[pkt_count]+info->seconds*HZ)) hits_found++;
}
if(hits_found >= info->hit_count) ans = !info->invert; else ans = info->invert;
}
/* snmp items */
-static struct snmp_mib snmp4_ipstats_list[] = {
+static const struct snmp_mib snmp4_ipstats_list[] = {
SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INRECEIVES),
SNMP_MIB_ITEM("InHdrErrors", IPSTATS_MIB_INHDRERRORS),
SNMP_MIB_ITEM("InAddrErrors", IPSTATS_MIB_INADDRERRORS),
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_icmp_list[] = {
+static const struct snmp_mib snmp4_icmp_list[] = {
SNMP_MIB_ITEM("InMsgs", ICMP_MIB_INMSGS),
SNMP_MIB_ITEM("InErrors", ICMP_MIB_INERRORS),
SNMP_MIB_ITEM("InDestUnreachs", ICMP_MIB_INDESTUNREACHS),
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_tcp_list[] = {
+static const struct snmp_mib snmp4_tcp_list[] = {
SNMP_MIB_ITEM("RtoAlgorithm", TCP_MIB_RTOALGORITHM),
SNMP_MIB_ITEM("RtoMin", TCP_MIB_RTOMIN),
SNMP_MIB_ITEM("RtoMax", TCP_MIB_RTOMAX),
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_udp_list[] = {
+static const struct snmp_mib snmp4_udp_list[] = {
SNMP_MIB_ITEM("InDatagrams", UDP_MIB_INDATAGRAMS),
SNMP_MIB_ITEM("NoPorts", UDP_MIB_NOPORTS),
SNMP_MIB_ITEM("InErrors", UDP_MIB_INERRORS),
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_net_list[] = {
+static const struct snmp_mib snmp4_net_list[] = {
SNMP_MIB_ITEM("SyncookiesSent", LINUX_MIB_SYNCOOKIESSENT),
SNMP_MIB_ITEM("SyncookiesRecv", LINUX_MIB_SYNCOOKIESRECV),
SNMP_MIB_ITEM("SyncookiesFailed", LINUX_MIB_SYNCOOKIESFAILED),
* are needed for AMPRnet AX.25 paths.
*/
-static unsigned short mtu_plateau[] =
+static const unsigned short mtu_plateau[] =
{32000, 17914, 8166, 4352, 2002, 1492, 576, 296, 216, 128 };
static __inline__ unsigned short guess_mtu(unsigned short old_mtu)
sizeof(struct rt_hash_bucket),
rhash_entries,
(num_physpages >= 128 * 1024) ?
- (27 - PAGE_SHIFT) :
- (29 - PAGE_SHIFT),
+ 15 : 17,
HASH_HIGHMEM,
&rt_hash_log,
&rt_hash_mask,
* closed.
*/
-static unsigned char new_state[16] = {
+static const unsigned char new_state[16] = {
/* current state: new state: action: */
/* (Invalid) */ TCP_CLOSE,
/* TCP_ESTABLISHED */ TCP_FIN_WAIT1 | TCP_ACTION_FIN,
sizeof(struct inet_ehash_bucket),
thash_entries,
(num_physpages >= 128 * 1024) ?
- (25 - PAGE_SHIFT) :
- (27 - PAGE_SHIFT),
+ 13 : 15,
HASH_HIGHMEM,
&tcp_hashinfo.ehash_size,
NULL,
sizeof(struct inet_bind_hashbucket),
tcp_hashinfo.ehash_size,
(num_physpages >= 128 * 1024) ?
- (25 - PAGE_SHIFT) :
- (27 - PAGE_SHIFT),
+ 13 : 15,
HASH_HIGHMEM,
&tcp_hashinfo.bhash_size,
NULL,
}
/* Rule 4: Prefer home address -- not implemented yet */
+ if (hiscore.rule < 4)
+ hiscore.rule++;
/* Rule 5: Prefer outgoing interface */
if (hiscore.rule < 5) {
inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6);
}
-static struct icmp6_err {
+static const struct icmp6_err {
int err;
int fatal;
} tab_unreach[] = {
*dst = NULL;
return err;
}
-inline int ip6_ufo_append_data(struct sock *sk,
+
+static inline int ip6_ufo_append_data(struct sock *sk,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int hh_len, int fragheaderlen,
return -EINVAL;
}
-int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_opt_hdr *hdr,
- char __user *optval, int len)
+static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_opt_hdr *hdr,
+ char __user *optval, int len)
{
if (!hdr)
return 0;
return pos;
}
-static struct { char *name; get_info_t *get_info; } ip6t_proc_entry[] =
+static const struct { char *name; get_info_t *get_info; } ip6t_proc_entry[] =
{ { "ip6_tables_names", ip6t_get_tables },
{ "ip6_tables_targets", ip6t_get_targets },
{ "ip6_tables_matches", ip6t_get_matches },
* sCL -> sCL
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI */
-/*ack*/ { sIV, sIV, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
+/*ack*/ { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
/*
- * sSS -> sIV Might be a half-open connection.
+ * sSS -> sIG Might be a half-open connection.
* sSR -> sSR Might answer late resent SYN.
* sES -> sES :-)
* sFW -> sCW Normal close request answered by ACK.
switch (new_state) {
case TCP_CONNTRACK_IGNORE:
- /* Either SYN in ORIGINAL
- * or SYN/ACK in REPLY. */
+ /* Ignored packets:
+ *
+ * a) SYN in ORIGINAL
+ * b) SYN/ACK in REPLY
+ * c) ACK in reply direction after initial SYN in original.
+ */
if (index == TCP_SYNACK_SET
&& conntrack->proto.tcp.last_index == TCP_SYN_SET
&& conntrack->proto.tcp.last_dir != dir
}
case TCP_CONNTRACK_CLOSE:
if (index == TCP_RST_SET
- && test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)
- && conntrack->proto.tcp.last_index == TCP_SYN_SET
+ && ((test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)
+ && conntrack->proto.tcp.last_index == TCP_SYN_SET)
+ || (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
+ && conntrack->proto.tcp.last_index == TCP_ACK_SET))
&& ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
- /* RST sent to invalid SYN we had let trough
- * SYN was in window then, tear down connection.
+ /* RST sent to invalid SYN or ACK we had let trough
+ * at a) and c) above:
+ *
+ * a) SYN was in window then
+ * c) we hold a half-open connection.
+ *
+ * Delete our connection entry.
* We skip window checking, because packet might ACK
- * segments we ignored in the SYN. */
+ * segments we ignored. */
goto in_window;
}
/* Just fall trough */
(!key->type->match ||
key->type->match(key, description)) &&
key_permission(make_key_ref(key, possessed),
- perm) < 0 &&
+ perm) == 0 &&
!test_bit(KEY_FLAG_REVOKED, &key->flags)
)
goto found;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff