PCI quirk: unhide 'Overflow' device on i828{6,7}5P/PE chipsets
authorMichal Miroslaw <mirq-linux@rere.qmqm.pl>
Tue, 12 May 2009 20:49:26 +0000 (13:49 -0700)
committerJesse Barnes <jbarnes@virtuousgeek.org>
Tue, 16 Jun 2009 21:29:08 +0000 (14:29 -0700)
Some BIOSes hide 'overflow' device (dev #6) for i82875P/PE chipsets.
The same happens for i82865P/PE. Add a quirk to enable this device.
This allows i82875 EDAC driver to bind to chipset's dev #6 and not
dev #0 as the latter is used by AGP driver.

On my laptop (i82865P based) ACPI code is disabling this device
again in \_SB.PCI0._CRS method (called at least at PNP init time).
This can be easily worked around by patching DSDT.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Acked-by: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
drivers/pci/quirks.c

index a778c84..15a8ab7 100644 (file)
@@ -2017,6 +2017,28 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
                        PCI_DEVICE_ID_NX2_5709S,
                        quirk_brcm_570x_limit_vpd);
 
+/* Originally in EDAC sources for i82875P:
+ * Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+       u8 reg;
+
+       if (pci_read_config_byte(dev, 0xF4, &reg) == 0 && !(reg & 0x02)) {
+               dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
+               pci_write_config_byte(dev, 0xF4, reg | 0x02);
+       }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+                       quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+                       quirk_unhide_mch_dev6);
+
+
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting
  * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually