[SPARC64]: Eliminate NR_CPUS limitations.

Cheetah systems can have cpuids as large as 1023, although physical
systems don't have that many cpus.

Only three limitations existed in the kernel preventing arbitrary
NR_CPUS values:

1) dcache dirty cpu state stored in page->flags on
   D-cache aliasing platforms.  With some build time
   calculations and some build-time BUG checks on
   page->flags layout, this one was easily solved.

2) The cheetah XCALL delivery code could only handle
   a cpumask with up to 32 cpus set.  Some simple looping
   logic clears that up too.

3) thread_info->cpu was a u8, easily changed to a u16.

There are a few spots in the kernel that still put NR_CPUS
sized arrays on the kernel stack, but that's not a sparc64
specific problem.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 831781c..bd00f89 100644 (file)
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -147,10 +147,10 @@ config SMP
          If you don't know what to do here, say N.
 
 config NR_CPUS
-       int "Maximum number of CPUs (2-64)"
-       range 2 64
+       int "Maximum number of CPUs (2-1024)"
+       range 2 1024
        depends on SMP
-       default "32"
+       default "64"
 
 source "drivers/cpufreq/Kconfig"
 

diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index baea10a..5c11529 100644 (file)
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -523,7 +523,7 @@ tlb_fixup_done:
 #else
        mov     0, %o0
 #endif
-       stb     %o0, [%g6 + TI_CPU]
+       sth     %o0, [%g6 + TI_CPU]
 
        /* Off we go.... */
        call    start_kernel

diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index f7fa873..c550bba 100644 (file)
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -400,7 +400,7 @@ static __inline__ void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, c
 static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
 {
        u64 pstate, ver;
-       int nack_busy_id, is_jbus;
+       int nack_busy_id, is_jbus, need_more;
 
        if (cpus_empty(mask))
                return;
@@ -416,6 +416,7 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas
        __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
 
 retry:
+       need_more = 0;
        __asm__ __volatile__("wrpr %0, %1, %%pstate\n\t"
                             : : "r" (pstate), "i" (PSTATE_IE));
 
@@ -444,6 +445,10 @@ retry:
                                : /* no outputs */
                                : "r" (target), "i" (ASI_INTR_W));
                        nack_busy_id++;
+                       if (nack_busy_id == 32) {
+                               need_more = 1;
+                               break;
+                       }
                }
        }
 
@@ -460,6 +465,16 @@ retry:
                        if (dispatch_stat == 0UL) {
                                __asm__ __volatile__("wrpr %0, 0x0, %%pstate"
                                                     : : "r" (pstate));
+                               if (unlikely(need_more)) {
+                                       int i, cnt = 0;
+                                       for_each_cpu_mask(i, mask) {
+                                               cpu_clear(i, mask);
+                                               cnt++;
+                                               if (cnt == 32)
+                                                       break;
+                                       }
+                                       goto retry;
+                               }
                                return;
                        }
                        if (!--stuck)
@@ -497,6 +512,8 @@ retry:
                                if ((dispatch_stat & check_mask) == 0)
                                        cpu_clear(i, mask);
                                this_busy_nack += 2;
+                               if (this_busy_nack == 64)
+                                       break;
                        }
 
                        goto retry;

diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 9776982..087cbf0 100644 (file)
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -191,12 +191,9 @@ inline void flush_dcache_page_impl(struct page *page)
 }
 
 #define PG_dcache_dirty                PG_arch_1
-#define PG_dcache_cpu_shift    24UL
-#define PG_dcache_cpu_mask     (256UL - 1UL)
-
-#if NR_CPUS > 256
-#error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus
-#endif
+#define PG_dcache_cpu_shift    32UL
+#define PG_dcache_cpu_mask     \
+       ((1UL<<ilog2(roundup_pow_of_two(NR_CPUS)))-1UL)
 
 #define dcache_dirty_cpu(page) \
        (((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask)
@@ -1349,6 +1346,19 @@ void __init paging_init(void)
        unsigned long end_pfn, pages_avail, shift, phys_base;
        unsigned long real_end, i;
 
+       /* These build time checkes make sure that the dcache_dirty_cpu()
+        * page->flags usage will work.
+        *
+        * When a page gets marked as dcache-dirty, we store the
+        * cpu number starting at bit 32 in the page->flags.  Also,
+        * functions like clear_dcache_dirty_cpu use the cpu mask
+        * in 13-bit signed-immediate instruction fields.
+        */
+       BUILD_BUG_ON(FLAGS_RESERVED != 32);
+       BUILD_BUG_ON(SECTIONS_WIDTH + NODES_WIDTH + ZONES_WIDTH +
+                    ilog2(roundup_pow_of_two(NR_CPUS)) > FLAGS_RESERVED);
+       BUILD_BUG_ON(NR_CPUS > 4096);
+
        kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
        kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
 

diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
index f321b1d..03c385d 100644 (file)
--- a/include/asm-sparc64/cpudata.h
+++ b/include/asm-sparc64/cpudata.h
@@ -202,7 +202,7 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
  * the calculations done by the macro mid-stream.
  */
 #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
-       ldub    [THR + TI_CPU], REG1;                   \
+       lduh    [THR + TI_CPU], REG1;                   \
        sethi   %hi(__per_cpu_shift), REG3;             \
        sethi   %hi(__per_cpu_base), REG2;              \
        ldx     [REG3 + %lo(__per_cpu_shift)], REG3;    \

diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
index 2ebf7f2..98252cd 100644 (file)
--- a/include/asm-sparc64/thread_info.h
+++ b/include/asm-sparc64/thread_info.h
@@ -38,8 +38,8 @@ struct thread_info {
        /* D$ line 1 */
        struct task_struct      *task;
        unsigned long           flags;
-       __u8                    cpu;
        __u8                    fpsaved[7];
+       __u8                    pad;
        unsigned long           ksp;
 
        /* D$ line 2 */
@@ -49,7 +49,7 @@ struct thread_info {
        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
        __u8                    new_child;
        __u8                    syscall_noerror;
-       __u16                   __pad;
+       __u16                   cpu;
 
        unsigned long           *utraps;
 
@@ -83,8 +83,7 @@ struct thread_info {
 #define TI_CURRENT_DS  (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
 #define TI_FPDEPTH     (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
 #define TI_WSAVED      (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
-#define TI_CPU         0x00000010
-#define TI_FPSAVED     0x00000011
+#define TI_FPSAVED     0x00000010
 #define TI_KSP         0x00000018
 #define TI_FAULT_ADDR  0x00000020
 #define TI_KREGS       0x00000028
@@ -92,6 +91,7 @@ struct thread_info {
 #define TI_PRE_COUNT   0x00000038
 #define TI_NEW_CHILD   0x0000003c
 #define TI_SYS_NOERROR 0x0000003d
+#define TI_CPU         0x0000003e
 #define TI_UTRAPS      0x00000040
 #define TI_REG_WINDOW  0x00000048
 #define TI_RWIN_SPTRS  0x000003c8