#define ET_PMCSR_INIT 0x38
/*
- * structure for interrupt status reg in global address map
- * located at address 0x0018
- */
-typedef union _INTERRUPT_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 unused5:11; /* bits 21-31 */
- u32 slv_timeout:1; /* bit 20 */
- u32 mac_stat_interrupt:1; /* bit 19 */
- u32 rxmac_interrupt:1; /* bit 18 */
- u32 txmac_interrupt:1; /* bit 17 */
- u32 phy_interrupt:1; /* bit 16 */
- u32 wake_on_lan:1; /* bit 15 */
- u32 watchdog_interrupt:1; /* bit 14 */
- u32 unused4:4; /* bits 10-13 */
- u32 rxdma_err:1; /* bit 9 */
- u32 rxdma_pkt_stat_ring_low:1; /* bit 8 */
- u32 rxdma_fb_ring1_low:1; /* bit 7 */
- u32 rxdma_fb_ring0_low:1; /* bit 6 */
- u32 rxdma_xfr_done:1; /* bit 5 */
- u32 txdma_err:1; /* bit 4 */
- u32 txdma_isr:1; /* bit 3 */
- u32 unused3:1; /* bit 2 */
- u32 unused2:1; /* bit 1 */
- u32 unused1:1; /* bit 0 */
-#else
- u32 unused1:1; /* bit 0 */
- u32 unused2:1; /* bit 1 */
- u32 unused3:1; /* bit 2 */
- u32 txdma_isr:1; /* bit 3 */
- u32 txdma_err:1; /* bit 4 */
- u32 rxdma_xfr_done:1; /* bit 5 */
- u32 rxdma_fb_ring0_low:1; /* bit 6 */
- u32 rxdma_fb_ring1_low:1; /* bit 7 */
- u32 rxdma_pkt_stat_ring_low:1; /* bit 8 */
- u32 rxdma_err:1; /* bit 9 */
- u32 unused4:4; /* bits 10-13 */
- u32 watchdog_interrupt:1; /* bit 14 */
- u32 wake_on_lan:1; /* bit 15 */
- u32 phy_interrupt:1; /* bit 16 */
- u32 txmac_interrupt:1; /* bit 17 */
- u32 rxmac_interrupt:1; /* bit 18 */
- u32 mac_stat_interrupt:1; /* bit 19 */
- u32 slv_timeout:1; /* bit 20 */
- u32 unused5:11; /* bits 21-31 */
-#endif
- } bits;
-} INTERRUPT_t, *PINTERRUPT_t;
-
-/*
- * structure for interrupt mask reg in global address map
- * located at address 0x001C
- * Defined earlier (INTERRUPT_t), but 'watchdog_interrupt' is not used.
- */
-
-/*
- * structure for interrupt alias clear mask reg in global address map
- * located at address 0x0020
- * Defined earlier (INTERRUPT_t)
- */
-
-/*
- * structure for interrupt status alias reg in global address map
- * located at address 0x0024
- * Defined earlier (INTERRUPT_t)
+ * Interrupt status reg at address 0x0018
+ */
+
+#define ET_INTR_TXDMA_ISR 0x00000008
+#define ET_INTR_TXDMA_ERR 0x00000010
+#define ET_INTR_RXDMA_XFR_DONE 0x00000020
+#define ET_INTR_RXDMA_FB_R0_LOW 0x00000040
+#define ET_INTR_RXDMA_FB_R1_LOW 0x00000080
+#define ET_INTR_RXDMA_STAT_LOW 0x00000100
+#define ET_INTR_RXDMA_ERR 0x00000200
+#define ET_INTR_WATCHDOG 0x00004000
+#define ET_INTR_WOL 0x00008000
+#define ET_INTR_PHY 0x00010000
+#define ET_INTR_TXMAC 0x00020000
+#define ET_INTR_RXMAC 0x00040000
+#define ET_INTR_MAC_STAT 0x00080000
+#define ET_INTR_SLV_TIMEOUT 0x00100000
+
+/*
+ * Interrupt mask register at address 0x001C
+ * Interrupt alias clear mask reg at address 0x0020
+ * Interrupt status alias reg at address 0x0024
+ *
+ * Same masks as above
*/
/*
u32 rxq_end_addr; /* 0x000C */
u32 pm_csr; /* 0x0010 */
u32 unused; /* 0x0014 */
- INTERRUPT_t int_status; /* 0x0018 */
- INTERRUPT_t int_mask; /* 0x001C */
- INTERRUPT_t int_alias_clr_en; /* 0x0020 */
- INTERRUPT_t int_status_alias; /* 0x0024 */
+ u32 int_status; /* 0x0018 */
+ u32 int_mask; /* 0x001C */
+ u32 int_alias_clr_en; /* 0x0020 */
+ u32 int_status_alias; /* 0x0024 */
SW_RESET_t sw_reset; /* 0x0028 */
SLV_TIMER_t slv_timer; /* 0x002C */
MSI_CONFIG_t msi_config; /* 0x0030 */
DBG_LEAVE(et131x_dbginfo);
}
+/**
+ * et131x_enable_interrupts - enable interrupt
+ * @adapter: et131x device
+ *
+ * Enable the appropriate interrupts on the ET131x according to our
+ * configuration
+ */
+
void et131x_enable_interrupts(struct et131x_adapter *adapter)
{
- uint32_t MaskValue;
+ u32 mask;
/* Enable all global interrupts */
if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both)
- MaskValue = INT_MASK_ENABLE;
+ mask = INT_MASK_ENABLE;
else
- MaskValue = INT_MASK_ENABLE_NO_FLOW;
+ mask = INT_MASK_ENABLE_NO_FLOW;
if (adapter->DriverNoPhyAccess)
- MaskValue |= 0x10000;
+ mask |= ET_INTR_PHY;
- adapter->CachedMaskValue.value = MaskValue;
- writel(MaskValue, &adapter->regs->global.int_mask.value);
+ adapter->CachedMaskValue = mask;
+ writel(mask, &adapter->regs->global.int_mask);
}
+/**
+ * et131x_disable_interrupts - interrupt disable
+ * @adapter: et131x device
+ *
+ * Block all interrupts from the et131x device at the device itself
+ */
+
void et131x_disable_interrupts(struct et131x_adapter *adapter)
{
/* Disable all global interrupts */
- adapter->CachedMaskValue.value = INT_MASK_DISABLE;
- writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask.value);
+ adapter->CachedMaskValue = INT_MASK_DISABLE;
+ writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask);
}
bool handled = true;
struct net_device *netdev = (struct net_device *)dev_id;
struct et131x_adapter *adapter = NULL;
- INTERRUPT_t status;
+ u32 status;
if (netdev == NULL || !netif_device_present(netdev)) {
DBG_WARNING(et131x_dbginfo,
/* Get a copy of the value in the interrupt status register
* so we can process the interrupting section
*/
- status.value = readl(&adapter->regs->global.int_status.value);
+ status = readl(&adapter->regs->global.int_status);
if (adapter->FlowControl == TxOnly ||
adapter->FlowControl == Both) {
- status.value &= ~INT_MASK_ENABLE;
+ status &= ~INT_MASK_ENABLE;
} else {
- status.value &= ~INT_MASK_ENABLE_NO_FLOW;
+ status &= ~INT_MASK_ENABLE_NO_FLOW;
}
/* Make sure this is our interrupt */
- if (!status.value) {
+ if (!status) {
#ifdef CONFIG_ET131X_DEBUG
adapter->Stats.UnhandledInterruptsPerSec++;
#endif
/* This is our interrupt, so process accordingly */
#ifdef CONFIG_ET131X_DEBUG
- if (status.bits.rxdma_xfr_done)
+ if (status & ET_INTR_RXDMA_XFR_DONE)
adapter->Stats.RxDmaInterruptsPerSec++;
- if (status.bits.txdma_isr)
+ if (status & ET_INTR_TXDMA_ISR)
adapter->Stats.TxDmaInterruptsPerSec++;
#endif
- if (status.bits.watchdog_interrupt) {
+ if (status & ET_INTR_WATCHDOG) {
PMP_TCB pMpTcb = adapter->TxRing.CurrSendHead;
if (pMpTcb)
if (++pMpTcb->PacketStaleCount > 1)
- status.bits.txdma_isr = 1;
+ status |= ET_INTR_TXDMA_ISR;
if (adapter->RxRing.UnfinishedReceives)
- status.bits.rxdma_xfr_done = 1;
+ status |= ET_INTR_RXDMA_XFR_DONE;
else if (pMpTcb == NULL)
writel(0, &adapter->regs->global.watchdog_timer);
- status.bits.watchdog_interrupt = 0;
+ status &= ~ET_INTR_WATCHDOG;
#ifdef CONFIG_ET131X_DEBUG
adapter->Stats.WatchDogInterruptsPerSec++;
#endif
}
- if (status.value == 0) {
+ if (status == 0) {
/* This interrupt has in some way been "handled" by
* the ISR. Either it was a spurious Rx interrupt, or
* it was a Tx interrupt that has been filtered by
{
struct et131x_adapter *etdev =
container_of(work, struct et131x_adapter, task);
- INTERRUPT_t GlobStatus = etdev->Stats.InterruptStatus;
+ u32 status = etdev->Stats.InterruptStatus;
ADDRESS_MAP_t __iomem *iomem = etdev->regs;
/*
* exit.
*/
/* Handle all the completed Transmit interrupts */
- if (GlobStatus.bits.txdma_isr) {
+ if (status & ET_INTR_TXDMA_ISR) {
DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n");
et131x_handle_send_interrupt(etdev);
}
/* Handle all the completed Receives interrupts */
- if (GlobStatus.bits.rxdma_xfr_done) {
+ if (status & ET_INTR_RXDMA_XFR_DONE) {
DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n");
et131x_handle_recv_interrupt(etdev);
}
- GlobStatus.value &= 0xffffffd7;
+ status &= 0xffffffd7;
- if (GlobStatus.value) {
+ if (status) {
/* Handle the TXDMA Error interrupt */
- if (GlobStatus.bits.txdma_err) {
+ if (status & ET_INTR_TXDMA_ERR) {
TXDMA_ERROR_t TxDmaErr;
/* Following read also clears the register (COR) */
}
/* Handle Free Buffer Ring 0 and 1 Low interrupt */
- if (GlobStatus.bits.rxdma_fb_ring0_low ||
- GlobStatus.bits.rxdma_fb_ring1_low) {
+ if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
/*
* This indicates the number of unused buffers in
* RXDMA free buffer ring 0 is <= the limit you
}
/* Handle Packet Status Ring Low Interrupt */
- if (GlobStatus.bits.rxdma_pkt_stat_ring_low) {
+ if (status & ET_INTR_RXDMA_STAT_LOW) {
DBG_WARNING(et131x_dbginfo,
"RXDMA_PKT_STAT_RING_LOW interrupt\n");
}
/* Handle RXDMA Error Interrupt */
- if (GlobStatus.bits.rxdma_err) {
+ if (status & ET_INTR_RXDMA_ERR) {
/*
* The rxdma_error interrupt is sent when a time-out
* on a request issued by the JAGCore has occurred or
}
/* Handle the Wake on LAN Event */
- if (GlobStatus.bits.wake_on_lan) {
+ if (status & ET_INTR_WOL) {
/*
* This is a secondary interrupt for wake on LAN.
* The driver should never see this, if it does,
}
/* Handle the PHY interrupt */
- if (GlobStatus.bits.phy_interrupt) {
+ if (status & ET_INTR_PHY) {
u32 pm_csr;
MI_BMSR_t BmsrInts, BmsrData;
MI_ISR_t myIsr;
}
/* Let's move on to the TxMac */
- if (GlobStatus.bits.txmac_interrupt) {
+ if (status & ET_INTR_TXMAC) {
etdev->TxRing.TxMacErr.value =
readl(&iomem->txmac.err.value);
}
/* Handle RXMAC Interrupt */
- if (GlobStatus.bits.rxmac_interrupt) {
+ if (status & ET_INTR_RXMAC) {
/*
* These interrupts are catastrophic to the device,
* what we need to do is disable the interrupts and
}
/* Handle MAC_STAT Interrupt */
- if (GlobStatus.bits.mac_stat_interrupt) {
+ if (status & ET_INTR_MAC_STAT) {
/*
* This means at least one of the un-masked counters
* in the MAC_STAT block has rolled over. Use this
}
/* Handle SLV Timeout Interrupt */
- if (GlobStatus.bits.slv_timeout) {
+ if (status & ET_INTR_SLV_TIMEOUT) {
/*
* This means a timeout has occured on a read or
* write request to one of the JAGCore registers. The
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff