[APM] MIPS: Convert to use shared APM emulation.
authorRalf Baechle <ralf@linux-mips.org>
Fri, 9 Feb 2007 17:08:58 +0000 (17:08 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Fri, 9 Feb 2007 17:08:58 +0000 (17:08 +0000)
Also convert to use generic kernel/power/Kconfig to make the use of the
shared APM emulation possible.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig
arch/mips/kernel/Makefile
arch/mips/kernel/apm.c [deleted file]
include/asm-mips/apm.h [deleted file]

index 44a0224..9d839a9 100644 (file)
@@ -934,6 +934,9 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
+config SYS_SUPPORTS_APM_EMULATION
+       bool
+
 config SYS_SUPPORTS_BIG_ENDIAN
        bool
 
@@ -1001,6 +1004,7 @@ config SOC_AU1X00
        bool
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_APM_EMULATION
 
 config PNX8550
        bool
@@ -2071,35 +2075,11 @@ config BINFMT_ELF32
        bool
        default y if MIPS32_O32 || MIPS32_N32
 
-config PM
-       bool "Power Management support (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && SOC_AU1X00
-
-config APM
-        tristate "Advanced Power Management Emulation"
-       depends on PM
-        ---help---
-         APM is a BIOS specification for saving power using several different
-         techniques. This is mostly useful for battery powered systems with
-         APM compliant BIOSes. If you say Y here, the system time will be
-         reset after a RESUME operation, the /proc/apm device will provide
-         battery status information, and user-space programs will receive
-         notification of APM "events" (e.g. battery status change).
-
-         In order to use APM, you will need supporting software. For location
-         and more information, read <file:Documentation/pm.txt> and the
-         Battery Powered Linux mini-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         This driver does not spin down disk drives (see the hdparm(8)
-         manpage ("man 8 hdparm") for that), and it doesn't turn off
-         VESA-compliant "green" monitors.
-
-         Generally, if you don't have a battery in your machine, there isn't
-         much point in using this driver and you should say N. If you get
-         random kernel OOPSes or reboots that don't seem to be related to
-         anything, try disabling/enabling this option (or disabling/enabling
-         APM in your BIOS).
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
 
 endmenu
 
index bbbb8d7..1bf2c84 100644 (file)
@@ -14,8 +14,6 @@ binfmt_irix-objs      := irixelf.o irixinv.o irixioctl.o irixsig.o    \
 obj-$(CONFIG_STACKTRACE)       += stacktrace.o
 obj-$(CONFIG_MODULES)          += mips_ksyms.o module.o
 
-obj-$(CONFIG_APM)              += apm.o
-
 obj-$(CONFIG_CPU_R3000)                += r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX39XX)       += r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX49XX)       += r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/kernel/apm.c b/arch/mips/kernel/apm.c
deleted file mode 100644 (file)
index ba16d07..0000000
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * bios-less APM driver for MIPS Linux
- *  Jamey Hicks <jamey@crl.dec.com>
- *  adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
- *
- * APM 1.2 Reference:
- *   Intel Corporation, Microsoft Corporation. Advanced Power Management
- *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
- *
- * [This document is available from Microsoft at:
- *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
- */
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/apm_bios.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-
-#include <asm/apm.h> /* apm_power_info */
-#include <asm/system.h>
-
-/*
- * The apm_bios device is one of the misc char devices.
- * This is its minor number.
- */
-#define APM_MINOR_DEV  134
-
-/*
- * See Documentation/Config.help for the configuration options.
- *
- * Various options can be changed at boot time as follows:
- * (We allow underscores for compatibility with the modules code)
- *     apm=on/off                      enable/disable APM
- */
-
-/*
- * Maximum number of events stored
- */
-#define APM_MAX_EVENTS         16
-
-struct apm_queue {
-       unsigned int            event_head;
-       unsigned int            event_tail;
-       apm_event_t             events[APM_MAX_EVENTS];
-};
-
-/*
- * The per-file APM data
- */
-struct apm_user {
-       struct list_head        list;
-
-       unsigned int            suser: 1;
-       unsigned int            writer: 1;
-       unsigned int            reader: 1;
-
-       int                     suspend_result;
-       unsigned int            suspend_state;
-#define SUSPEND_NONE   0               /* no suspend pending */
-#define SUSPEND_PENDING        1               /* suspend pending read */
-#define SUSPEND_READ   2               /* suspend read, pending ack */
-#define SUSPEND_ACKED  3               /* suspend acked */
-#define SUSPEND_DONE   4               /* suspend completed */
-
-       struct apm_queue        queue;
-};
-
-/*
- * Local variables
- */
-static int suspends_pending;
-static int apm_disabled;
-static int mips_apm_active;
-
-static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
-static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
-
-/*
- * This is a list of everyone who has opened /dev/apm_bios
- */
-static DECLARE_RWSEM(user_list_lock);
-static LIST_HEAD(apm_user_list);
-
-/*
- * kapmd info.  kapmd provides us a process context to handle
- * "APM" events within - specifically necessary if we're going
- * to be suspending the system.
- */
-static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
-static DECLARE_COMPLETION(kapmd_exit);
-static DEFINE_SPINLOCK(kapmd_queue_lock);
-static struct apm_queue kapmd_queue;
-
-
-static const char driver_version[] = "1.13";   /* no spaces */
-
-
-
-/*
- * Compatibility cruft until the IPAQ people move over to the new
- * interface.
- */
-static void __apm_get_power_status(struct apm_power_info *info)
-{
-}
-
-/*
- * This allows machines to provide their own "apm get power status" function.
- */
-void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
-EXPORT_SYMBOL(apm_get_power_status);
-
-
-/*
- * APM event queue management.
- */
-static inline int queue_empty(struct apm_queue *q)
-{
-       return q->event_head == q->event_tail;
-}
-
-static inline apm_event_t queue_get_event(struct apm_queue *q)
-{
-       q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
-       return q->events[q->event_tail];
-}
-
-static void queue_add_event(struct apm_queue *q, apm_event_t event)
-{
-       q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
-       if (q->event_head == q->event_tail) {
-               static int notified;
-
-               if (notified++ == 0)
-                   printk(KERN_ERR "apm: an event queue overflowed\n");
-               q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
-       }
-       q->events[q->event_head] = event;
-}
-
-static void queue_event_one_user(struct apm_user *as, apm_event_t event)
-{
-       if (as->suser && as->writer) {
-               switch (event) {
-               case APM_SYS_SUSPEND:
-               case APM_USER_SUSPEND:
-                       /*
-                        * If this user already has a suspend pending,
-                        * don't queue another one.
-                        */
-                       if (as->suspend_state != SUSPEND_NONE)
-                               return;
-
-                       as->suspend_state = SUSPEND_PENDING;
-                       suspends_pending++;
-                       break;
-               }
-       }
-       queue_add_event(&as->queue, event);
-}
-
-static void queue_event(apm_event_t event, struct apm_user *sender)
-{
-       struct apm_user *as;
-
-       down_read(&user_list_lock);
-       list_for_each_entry(as, &apm_user_list, list) {
-               if (as != sender && as->reader)
-                       queue_event_one_user(as, event);
-       }
-       up_read(&user_list_lock);
-       wake_up_interruptible(&apm_waitqueue);
-}
-
-static void apm_suspend(void)
-{
-       struct apm_user *as;
-       int err = pm_suspend(PM_SUSPEND_MEM);
-
-       /*
-        * Anyone on the APM queues will think we're still suspended.
-        * Send a message so everyone knows we're now awake again.
-        */
-       queue_event(APM_NORMAL_RESUME, NULL);
-
-       /*
-        * Finally, wake up anyone who is sleeping on the suspend.
-        */
-       down_read(&user_list_lock);
-       list_for_each_entry(as, &apm_user_list, list) {
-               as->suspend_result = err;
-               as->suspend_state = SUSPEND_DONE;
-       }
-       up_read(&user_list_lock);
-
-       wake_up(&apm_suspend_waitqueue);
-}
-
-static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
-{
-       struct apm_user *as = fp->private_data;
-       apm_event_t event;
-       int i = count, ret = 0;
-
-       if (count < sizeof(apm_event_t))
-               return -EINVAL;
-
-       if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
-               return -EAGAIN;
-
-       wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
-
-       while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
-               event = queue_get_event(&as->queue);
-
-               ret = -EFAULT;
-               if (copy_to_user(buf, &event, sizeof(event)))
-                       break;
-
-               if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
-                       as->suspend_state = SUSPEND_READ;
-
-               buf += sizeof(event);
-               i -= sizeof(event);
-       }
-
-       if (i < count)
-               ret = count - i;
-
-       return ret;
-}
-
-static unsigned int apm_poll(struct file *fp, poll_table * wait)
-{
-       struct apm_user *as = fp->private_data;
-
-       poll_wait(fp, &apm_waitqueue, wait);
-       return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
-}
-
-/*
- * apm_ioctl - handle APM ioctl
- *
- * APM_IOC_SUSPEND
- *   This IOCTL is overloaded, and performs two functions.  It is used to:
- *     - initiate a suspend
- *     - acknowledge a suspend read from /dev/apm_bios.
- *   Only when everyone who has opened /dev/apm_bios with write permission
- *   has acknowledge does the actual suspend happen.
- */
-static int
-apm_ioctl(struct inode * inode, struct file *filp, unsigned int cmd, unsigned long arg)
-{
-       struct apm_user *as = filp->private_data;
-       unsigned long flags;
-       int err = -EINVAL;
-
-       if (!as->suser || !as->writer)
-               return -EPERM;
-
-       switch (cmd) {
-       case APM_IOC_SUSPEND:
-               as->suspend_result = -EINTR;
-
-               if (as->suspend_state == SUSPEND_READ) {
-                       /*
-                        * If we read a suspend command from /dev/apm_bios,
-                        * then the corresponding APM_IOC_SUSPEND ioctl is
-                        * interpreted as an acknowledge.
-                        */
-                       as->suspend_state = SUSPEND_ACKED;
-                       suspends_pending--;
-               } else {
-                       /*
-                        * Otherwise it is a request to suspend the system.
-                        * Queue an event for all readers, and expect an
-                        * acknowledge from all writers who haven't already
-                        * acknowledged.
-                        */
-                       queue_event(APM_USER_SUSPEND, as);
-               }
-
-               /*
-                * If there are no further acknowledges required, suspend
-                * the system.
-                */
-               if (suspends_pending == 0)
-                       apm_suspend();
-
-               /*
-                * Wait for the suspend/resume to complete.  If there are
-                * pending acknowledges, we wait here for them.
-                *
-                * Note that we need to ensure that the PM subsystem does
-                * not kick us out of the wait when it suspends the threads.
-                */
-               flags = current->flags;
-               current->flags |= PF_NOFREEZE;
-
-               /*
-                * Note: do not allow a thread which is acking the suspend
-                * to escape until the resume is complete.
-                */
-               if (as->suspend_state == SUSPEND_ACKED)
-                       wait_event(apm_suspend_waitqueue,
-                                        as->suspend_state == SUSPEND_DONE);
-               else
-                       wait_event_interruptible(apm_suspend_waitqueue,
-                                        as->suspend_state == SUSPEND_DONE);
-
-               current->flags = flags;
-               err = as->suspend_result;
-               as->suspend_state = SUSPEND_NONE;
-               break;
-       }
-
-       return err;
-}
-
-static int apm_release(struct inode * inode, struct file * filp)
-{
-       struct apm_user *as = filp->private_data;
-       filp->private_data = NULL;
-
-       down_write(&user_list_lock);
-       list_del(&as->list);
-       up_write(&user_list_lock);
-
-       /*
-        * We are now unhooked from the chain.  As far as new
-        * events are concerned, we no longer exist.  However, we
-        * need to balance suspends_pending, which means the
-        * possibility of sleeping.
-        */
-       if (as->suspend_state != SUSPEND_NONE) {
-               suspends_pending -= 1;
-               if (suspends_pending == 0)
-                       apm_suspend();
-       }
-
-       kfree(as);
-       return 0;
-}
-
-static int apm_open(struct inode * inode, struct file * filp)
-{
-       struct apm_user *as;
-
-       as = kzalloc(sizeof(*as), GFP_KERNEL);
-       if (as) {
-               /*
-                * XXX - this is a tiny bit broken, when we consider BSD
-                * process accounting. If the device is opened by root, we
-                * instantly flag that we used superuser privs. Who knows,
-                * we might close the device immediately without doing a
-                * privileged operation -- cevans
-                */
-               as->suser = capable(CAP_SYS_ADMIN);
-               as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
-               as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
-
-               down_write(&user_list_lock);
-               list_add(&as->list, &apm_user_list);
-               up_write(&user_list_lock);
-
-               filp->private_data = as;
-       }
-
-       return as ? 0 : -ENOMEM;
-}
-
-static struct file_operations apm_bios_fops = {
-       .owner          = THIS_MODULE,
-       .read           = apm_read,
-       .poll           = apm_poll,
-       .ioctl          = apm_ioctl,
-       .open           = apm_open,
-       .release        = apm_release,
-};
-
-static struct miscdevice apm_device = {
-       .minor          = APM_MINOR_DEV,
-       .name           = "apm_bios",
-       .fops           = &apm_bios_fops
-};
-
-
-#ifdef CONFIG_PROC_FS
-/*
- * Arguments, with symbols from linux/apm_bios.h.
- *
- *   0) Linux driver version (this will change if format changes)
- *   1) APM BIOS Version.  Usually 1.0, 1.1 or 1.2.
- *   2) APM flags from APM Installation Check (0x00):
- *     bit 0: APM_16_BIT_SUPPORT
- *     bit 1: APM_32_BIT_SUPPORT
- *     bit 2: APM_IDLE_SLOWS_CLOCK
- *     bit 3: APM_BIOS_DISABLED
- *     bit 4: APM_BIOS_DISENGAGED
- *   3) AC line status
- *     0x00: Off-line
- *     0x01: On-line
- *     0x02: On backup power (BIOS >= 1.1 only)
- *     0xff: Unknown
- *   4) Battery status
- *     0x00: High
- *     0x01: Low
- *     0x02: Critical
- *     0x03: Charging
- *     0x04: Selected battery not present (BIOS >= 1.2 only)
- *     0xff: Unknown
- *   5) Battery flag
- *     bit 0: High
- *     bit 1: Low
- *     bit 2: Critical
- *     bit 3: Charging
- *     bit 7: No system battery
- *     0xff: Unknown
- *   6) Remaining battery life (percentage of charge):
- *     0-100: valid
- *     -1: Unknown
- *   7) Remaining battery life (time units):
- *     Number of remaining minutes or seconds
- *     -1: Unknown
- *   8) min = minutes; sec = seconds
- */
-static int apm_get_info(char *buf, char **start, off_t fpos, int length)
-{
-       struct apm_power_info info;
-       char *units;
-       int ret;
-
-       info.ac_line_status = 0xff;
-       info.battery_status = 0xff;
-       info.battery_flag   = 0xff;
-       info.battery_life   = -1;
-       info.time           = -1;
-       info.units          = -1;
-
-       if (apm_get_power_status)
-               apm_get_power_status(&info);
-
-       switch (info.units) {
-       default:        units = "?";    break;
-       case 0:         units = "min";  break;
-       case 1:         units = "sec";  break;
-       }
-
-       ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
-                    driver_version, APM_32_BIT_SUPPORT,
-                    info.ac_line_status, info.battery_status,
-                    info.battery_flag, info.battery_life,
-                    info.time, units);
-
-       return ret;
-}
-#endif
-
-static int kapmd(void *arg)
-{
-       daemonize("kapmd");
-       current->flags |= PF_NOFREEZE;
-
-       do {
-               apm_event_t event;
-
-               wait_event_interruptible(kapmd_wait,
-                               !queue_empty(&kapmd_queue) || !mips_apm_active);
-
-               if (!mips_apm_active)
-                       break;
-
-               spin_lock_irq(&kapmd_queue_lock);
-               event = 0;
-               if (!queue_empty(&kapmd_queue))
-                       event = queue_get_event(&kapmd_queue);
-               spin_unlock_irq(&kapmd_queue_lock);
-
-               switch (event) {
-               case 0:
-                       break;
-
-               case APM_LOW_BATTERY:
-               case APM_POWER_STATUS_CHANGE:
-                       queue_event(event, NULL);
-                       break;
-
-               case APM_USER_SUSPEND:
-               case APM_SYS_SUSPEND:
-                       queue_event(event, NULL);
-                       if (suspends_pending == 0)
-                               apm_suspend();
-                       break;
-
-               case APM_CRITICAL_SUSPEND:
-                       apm_suspend();
-                       break;
-               }
-       } while (1);
-
-       complete_and_exit(&kapmd_exit, 0);
-}
-
-static int __init apm_init(void)
-{
-       int ret;
-
-       if (apm_disabled) {
-               printk(KERN_NOTICE "apm: disabled on user request.\n");
-               return -ENODEV;
-       }
-
-       mips_apm_active = 1;
-
-       ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
-       if (ret < 0) {
-               mips_apm_active = 0;
-               return ret;
-       }
-
-#ifdef CONFIG_PROC_FS
-       create_proc_info_entry("apm", 0, NULL, apm_get_info);
-#endif
-
-       ret = misc_register(&apm_device);
-       if (ret != 0) {
-               remove_proc_entry("apm", NULL);
-
-               mips_apm_active = 0;
-               wake_up(&kapmd_wait);
-               wait_for_completion(&kapmd_exit);
-       }
-
-       return ret;
-}
-
-static void __exit apm_exit(void)
-{
-       misc_deregister(&apm_device);
-       remove_proc_entry("apm", NULL);
-
-       mips_apm_active = 0;
-       wake_up(&kapmd_wait);
-       wait_for_completion(&kapmd_exit);
-}
-
-module_init(apm_init);
-module_exit(apm_exit);
-
-MODULE_AUTHOR("Stephen Rothwell");
-MODULE_DESCRIPTION("Advanced Power Management");
-MODULE_LICENSE("GPL");
-
-#ifndef MODULE
-static int __init apm_setup(char *str)
-{
-       while ((str != NULL) && (*str != '\0')) {
-               if (strncmp(str, "off", 3) == 0)
-                       apm_disabled = 1;
-               if (strncmp(str, "on", 2) == 0)
-                       apm_disabled = 0;
-               str = strchr(str, ',');
-               if (str != NULL)
-                       str += strspn(str, ", \t");
-       }
-       return 1;
-}
-
-__setup("apm=", apm_setup);
-#endif
-
-/**
- * apm_queue_event - queue an APM event for kapmd
- * @event: APM event
- *
- * Queue an APM event for kapmd to process and ultimately take the
- * appropriate action.  Only a subset of events are handled:
- *   %APM_LOW_BATTERY
- *   %APM_POWER_STATUS_CHANGE
- *   %APM_USER_SUSPEND
- *   %APM_SYS_SUSPEND
- *   %APM_CRITICAL_SUSPEND
- */
-void apm_queue_event(apm_event_t event)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&kapmd_queue_lock, flags);
-       queue_add_event(&kapmd_queue, event);
-       spin_unlock_irqrestore(&kapmd_queue_lock, flags);
-
-       wake_up_interruptible(&kapmd_wait);
-}
-EXPORT_SYMBOL(apm_queue_event);
diff --git a/include/asm-mips/apm.h b/include/asm-mips/apm.h
deleted file mode 100644 (file)
index 4b99ffc..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/* -*- linux-c -*-
- *
- * (C) 2003 zecke@handhelds.org
- *
- * GPL version 2
- *
- * based on arch/arm/kernel/apm.c
- * factor out the information needed by architectures to provide
- * apm status
- *
- *
- */
-#ifndef MIPS_ASM_SA1100_APM_H
-#define MIPS_ASM_SA1100_APM_H
-
-#include <linux/apm_bios.h>
-
-/*
- * This structure gets filled in by the machine specific 'get_power_status'
- * implementation.  Any fields which are not set default to a safe value.
- */
-struct apm_power_info {
-       unsigned char   ac_line_status;
-#define APM_AC_OFFLINE                 0
-#define APM_AC_ONLINE                  1
-#define APM_AC_BACKUP                  2
-#define APM_AC_UNKNOWN                 0xff
-
-       unsigned char   battery_status;
-#define APM_BATTERY_STATUS_HIGH                0
-#define APM_BATTERY_STATUS_LOW         1
-#define APM_BATTERY_STATUS_CRITICAL    2
-#define APM_BATTERY_STATUS_CHARGING    3
-#define APM_BATTERY_STATUS_NOT_PRESENT 4
-#define APM_BATTERY_STATUS_UNKNOWN     0xff
-
-       unsigned char   battery_flag;
-#define APM_BATTERY_FLAG_HIGH          (1 << 0)
-#define APM_BATTERY_FLAG_LOW           (1 << 1)
-#define APM_BATTERY_FLAG_CRITICAL      (1 << 2)
-#define APM_BATTERY_FLAG_CHARGING      (1 << 3)
-#define APM_BATTERY_FLAG_NOT_PRESENT   (1 << 7)
-#define APM_BATTERY_FLAG_UNKNOWN       0xff
-
-       int             battery_life;
-       int             time;
-       int             units;
-#define APM_UNITS_MINS                 0
-#define APM_UNITS_SECS                 1
-#define APM_UNITS_UNKNOWN              -1
-
-};
-
-/*
- * This allows machines to provide their own "apm get power status" function.
- */
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-/*
- * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
- */
-void apm_queue_event(apm_event_t event);
-
-#endif