gianfar: Revive fixed link support

Since commit fe192a49118f5b1272317d60c7930ece4e13ae49 ("Rework gianfar
driver to use of_mdio infrastructure") the fixed-link support is
broken, the driver oopses at init_phy():

  Unable to handle kernel paging request for data at address 0x000000e4
  Faulting instruction address: 0xc01cf298
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c01cf298] init_phy+0x80/0xdc
  LR [c01cf250] init_phy+0x38/0xdc
  Call Trace:
  [cf81fe80] [c01d1cf8] gfar_enet_open+0x6c/0x19c
  [cf81fea0] [c024494c] dev_open+0xfc/0x134
  [cf81fec0] [c0242edc] dev_change_flags+0x84/0x1ac
  [cf81fee0] [c0399ee0] ic_open_devs+0x168/0x2d8
  [cf81ff20] [c039b2e8] ip_auto_config+0x90/0x2a4
  [cf81ff60] [c0003884] do_one_initcall+0x34/0x1a8

This patch fixes the oops, and removes phy_node checks, and adds a call
to of_phy_connect_fixed_link() if a phy isn't attached..

Also, remove an old fixed-link code that we don't use any longer.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 43d813e..f8ffcbf 100644 (file)
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -264,15 +264,6 @@ static int gfar_of_init(struct net_device *dev)
                priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
        priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
-       if (!priv->phy_node) {
-               u32 *fixed_link;
-
-               fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
-               if (!fixed_link) {
-                       err = -ENODEV;
-                       goto err_out;
-               }
-       }
 
        /* Find the TBI PHY.  If it's not there, we don't support SGMII */
        priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -659,13 +650,14 @@ static int init_phy(struct net_device *dev)
 
        interface = gfar_get_interface(dev);
 
-       if (priv->phy_node) {
-               priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
-                                             0, interface);
-               if (!priv->phydev) {
-                       dev_err(&dev->dev, "error: Could not attach to PHY\n");
-                       return -ENODEV;
-               }
+       priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+                                     interface);
+       if (!priv->phydev)
+               priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+                                                        interface);
+       if (!priv->phydev) {
+               dev_err(&dev->dev, "could not attach to PHY\n");
+               return -ENODEV;
        }
 
        if (interface == PHY_INTERFACE_MODE_SGMII)