USB: ipaq: handle 4 endpoint devices

The ipaq driver currently enforces one port on all devices. This
is correct for 2 and 3 endpoint devices, but with 4 endpoint devices
meaningful communication occurs on the second pair.

This patch allows 2 ports for 4 endpoint devices.

Signed-off-by: Mark Ellis <mark@mpellis.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 132be74..ef92095 100644 (file)
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -78,6 +78,7 @@ static int  ipaq_open(struct tty_struct *tty,
                        struct usb_serial_port *port, struct file *filp);
 static void ipaq_close(struct tty_struct *tty,
                        struct usb_serial_port *port, struct file *filp);
+static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
 static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -572,15 +573,10 @@ static struct usb_serial_driver ipaq_device = {
        .description =          "PocketPC PDA",
        .usb_driver =           &ipaq_driver,
        .id_table =             ipaq_id_table,
-       /*
-        * some devices have an extra endpoint, which
-        * must be ignored as it would make the core
-        * create a second port which oopses when used
-        */
-       .num_ports =            1,
        .open =                 ipaq_open,
        .close =                ipaq_close,
        .attach =               ipaq_startup,
+       .calc_num_ports =       ipaq_calc_num_ports,
        .shutdown =             ipaq_shutdown,
        .write =                ipaq_write,
        .write_room =           ipaq_write_room,
@@ -956,14 +952,49 @@ static void ipaq_destroy_lists(struct usb_serial_port *port)
 }
 
 
+static int ipaq_calc_num_ports(struct usb_serial *serial)
+{
+       /*
+        * some devices have 3 endpoints, the 3rd of which
+        * must be ignored as it would make the core
+        * create a second port which oopses when used
+        */
+       int ipaq_num_ports = 1;
+
+       dbg("%s - numberofendpoints: %d", __FUNCTION__,
+               (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+
+       /*
+        * a few devices have 4 endpoints, seemingly Yakuma devices,
+        * and we need the second pair, so let them have 2 ports
+        *
+        * TODO: can we drop port 1 ?
+        */
+       if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) {
+               ipaq_num_ports = 2;
+       }
+
+       return ipaq_num_ports;
+}
+
+
 static int ipaq_startup(struct usb_serial *serial)
 {
        dbg("%s", __func__);
        if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+               /*
+                * FIXME: HP iPaq rx3715, possibly others, have 1 config that
+                * is labeled as 2
+                */
+
                dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
                        serial->dev->actconfig->desc.bConfigurationValue);
                return -ENODEV;
        }
+
+       dbg("%s - iPAQ module configured for %d ports",
+               __FUNCTION__, serial->num_ports);
+
        return usb_reset_configuration(serial->dev);
 }