skge: use dev_printk

Use dev_printk related macros for PCI related errors and warnings

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index ce25b6f..9135602 100644 (file)
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2395,7 +2395,7 @@ static int skge_up(struct net_device *dev)
        BUG_ON(skge->dma & 7);
 
        if ((u64)skge->dma >> 32 != ((u64) skge->dma + skge->mem_size) >> 32) {
-               printk(KERN_ERR PFX "pci_alloc_consistent region crosses 4G boundary\n");
+               dev_err(&hw->pdev->dev, "pci_alloc_consistent region crosses 4G boundary\n");
                err = -EINVAL;
                goto free_pci_mem;
        }
@@ -3004,6 +3004,7 @@ static void skge_mac_intr(struct skge_hw *hw, int port)
 /* Handle device specific framing and timeout interrupts */
 static void skge_error_irq(struct skge_hw *hw)
 {
+       struct pci_dev *pdev = hw->pdev;
        u32 hwstatus = skge_read32(hw, B0_HWE_ISRC);
 
        if (hw->chip_id == CHIP_ID_GENESIS) {
@@ -3019,12 +3020,12 @@ static void skge_error_irq(struct skge_hw *hw)
        }
 
        if (hwstatus & IS_RAM_RD_PAR) {
-               printk(KERN_ERR PFX "Ram read data parity error\n");
+               dev_err(&pdev->dev, "Ram read data parity error\n");
                skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR);
        }
 
        if (hwstatus & IS_RAM_WR_PAR) {
-               printk(KERN_ERR PFX "Ram write data parity error\n");
+               dev_err(&pdev->dev, "Ram write data parity error\n");
                skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR);
        }
 
@@ -3035,38 +3036,38 @@ static void skge_error_irq(struct skge_hw *hw)
                skge_mac_parity(hw, 1);
 
        if (hwstatus & IS_R1_PAR_ERR) {
-               printk(KERN_ERR PFX "%s: receive queue parity error\n",
-                      hw->dev[0]->name);
+               dev_err(&pdev->dev, "%s: receive queue parity error\n",
+                       hw->dev[0]->name);
                skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P);
        }
 
        if (hwstatus & IS_R2_PAR_ERR) {
-               printk(KERN_ERR PFX "%s: receive queue parity error\n",
-                      hw->dev[1]->name);
+               dev_err(&pdev->dev, "%s: receive queue parity error\n",
+                       hw->dev[1]->name);
                skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P);
        }
 
        if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) {
                u16 pci_status, pci_cmd;
 
-               pci_read_config_word(hw->pdev, PCI_COMMAND, &pci_cmd);
-               pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status);
+               pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+               pci_read_config_word(pdev, PCI_STATUS, &pci_status);
 
-               printk(KERN_ERR PFX "%s: PCI error cmd=%#x status=%#x\n",
-                              pci_name(hw->pdev), pci_cmd, pci_status);
+               dev_err(&pdev->dev, "PCI error cmd=%#x status=%#x\n",
+                       pci_cmd, pci_status);
 
                /* Write the error bits back to clear them. */
                pci_status &= PCI_STATUS_ERROR_BITS;
                skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-               pci_write_config_word(hw->pdev, PCI_COMMAND,
+               pci_write_config_word(pdev, PCI_COMMAND,
                                      pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
-               pci_write_config_word(hw->pdev, PCI_STATUS, pci_status);
+               pci_write_config_word(pdev, PCI_STATUS, pci_status);
                skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
                /* if error still set then just ignore it */
                hwstatus = skge_read32(hw, B0_HWE_ISRC);
                if (hwstatus & IS_IRQ_STAT) {
-                       printk(KERN_INFO PFX "unable to clear error (so ignoring them)\n");
+                       dev_warn(&hw->pdev->dev, "unable to clear error (so ignoring them)\n");
                        hw->intr_mask &= ~IS_HW_ERR;
                }
        }
@@ -3280,8 +3281,8 @@ static int skge_reset(struct skge_hw *hw)
                        hw->phy_addr = PHY_ADDR_BCOM;
                        break;
                default:
-                       printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
-                              pci_name(hw->pdev), hw->phy_type);
+                       dev_err(&hw->pdev->dev, "unsupported phy type 0x%x\n",
+                              hw->phy_type);
                        return -EOPNOTSUPP;
                }
                break;
@@ -3296,8 +3297,8 @@ static int skge_reset(struct skge_hw *hw)
                break;
 
        default:
-               printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
-                      pci_name(hw->pdev), hw->chip_id);
+               dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+                      hw->chip_id);
                return -EOPNOTSUPP;
        }
 
@@ -3337,7 +3338,7 @@ static int skge_reset(struct skge_hw *hw)
                /* avoid boards with stuck Hardware error bits */
                if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
                    (skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
-                       printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
+                       dev_warn(&hw->pdev->dev, "stuck hardware sensor bit\n");
                        hw->intr_mask &= ~IS_HW_ERR;
                }
 
@@ -3411,7 +3412,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
        struct net_device *dev = alloc_etherdev(sizeof(*skge));
 
        if (!dev) {
-               printk(KERN_ERR "skge etherdev alloc failed");
+               dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
                return NULL;
        }
 
@@ -3499,15 +3500,13 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
        err = pci_enable_device(pdev);
        if (err) {
-               printk(KERN_ERR PFX "%s cannot enable PCI device\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "cannot enable PCI device\n");
                goto err_out;
        }
 
        err = pci_request_regions(pdev, DRV_NAME);
        if (err) {
-               printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "cannot obtain PCI resources\n");
                goto err_out_disable_pdev;
        }
 
@@ -3522,8 +3521,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
        }
 
        if (err) {
-               printk(KERN_ERR PFX "%s no usable DMA configuration\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "no usable DMA configuration\n");
                goto err_out_free_regions;
        }
 
@@ -3541,8 +3539,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
        err = -ENOMEM;
        hw = kzalloc(sizeof(*hw), GFP_KERNEL);
        if (!hw) {
-               printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "cannot allocate hardware struct\n");
                goto err_out_free_regions;
        }
 
@@ -3553,8 +3550,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
        hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
        if (!hw->regs) {
-               printk(KERN_ERR PFX "%s: cannot map device registers\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "cannot map device registers\n");
                goto err_out_free_hw;
        }
 
@@ -3571,21 +3567,18 @@ static int __devinit skge_probe(struct pci_dev *pdev,
                goto err_out_led_off;
 
        /* Some motherboards are broken and has zero in ROM. */
-       if (!is_valid_ether_addr(dev->dev_addr)) {
-               printk(KERN_WARNING PFX "%s: bad (zero?) ethernet address in rom\n",
-                      pci_name(pdev));
-       }
+       if (!is_valid_ether_addr(dev->dev_addr))
+               dev_warn(&pdev->dev, "bad (zero?) ethernet address in rom\n");
 
        err = register_netdev(dev);
        if (err) {
-               printk(KERN_ERR PFX "%s: cannot register net device\n",
-                      pci_name(pdev));
+               dev_err(&pdev->dev, "cannot register net device\n");
                goto err_out_free_netdev;
        }
 
        err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
        if (err) {
-               printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+               dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
                       dev->name, pdev->irq);
                goto err_out_unregister;
        }
@@ -3596,7 +3589,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
                        skge_show_addr(dev1);
                else {
                        /* Failure to register second port need not be fatal */
-                       printk(KERN_WARNING PFX "register of second port failed\n");
+                       dev_warn(&pdev->dev, "register of second port failed\n");
                        hw->dev[1] = NULL;
                        free_netdev(dev1);
                }