/*-------------------------------------------------------------------------*/
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- */
- u32 hc_capbase;
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
- u8 portroute [8]; /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
- /* USBCMD: offset 0x00 */
- u32 command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved [9];
-
- /* CONFIGFLAG: offset 0x40 */
- u32 configured_flag;
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
- /* PORTSC: offset 0x44 */
- u32 port_status [0]; /* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF (0<<14)
-#define PORT_LED_AMBER (1<<14)
-#define PORT_LED_GREEN (2<<14)
-#define PORT_LED_MASK (3<<14)
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_OCC (1<<5) /* over current change */
-#define PORT_OC (1<<4) /* over current active */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE 0x68 /* USB Device mode */
-#define USBMODE_SDIS (1<<3) /* Stream disable */
-#define USBMODE_BE (1<<2) /* BE/LE endianness select */
-#define USBMODE_CM_HC (3<<0) /* host controller mode */
-#define USBMODE_CM_IDLE (0<<0) /* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
/*-------------------------------------------------------------------------*/
--- /dev/null
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute [8]; /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved [9];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status [0]; /* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE 0x68 /* USB Device mode */
+#define USBMODE_SDIS (1<<3) /* Stream disable */
+#define USBMODE_BE (1<<2) /* BE/LE endianness select */
+#define USBMODE_CM_HC (3<<0) /* host controller mode */
+#define USBMODE_CM_IDLE (0<<0) /* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff