igb: add pci_dev in few spots to clean up use of dev_err/info/warn

This patch relpaces several references to adapter->pdev->dev with just
pdev->dev.  This allows for cleanup of several multiline dev_err/info
calls.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b2c0c97..264ff00 100644 (file)
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1173,6 +1173,7 @@ void igb_reinit_locked(struct igb_adapter *adapter)
 
 void igb_reset(struct igb_adapter *adapter)
 {
+       struct pci_dev *pdev = adapter->pdev;
        struct e1000_hw *hw = &adapter->hw;
        struct e1000_mac_info *mac = &hw->mac;
        struct e1000_fc_info *fc = &hw->fc;
@@ -1275,7 +1276,7 @@ void igb_reset(struct igb_adapter *adapter)
        wr32(E1000_WUC, 0);
 
        if (hw->mac.ops.init_hw(hw))
-               dev_err(&adapter->pdev->dev, "Hardware Error\n");
+               dev_err(&pdev->dev, "Hardware Error\n");
 
        igb_update_mng_vlan(adapter);
 
@@ -3704,17 +3705,18 @@ static struct net_device_stats *igb_get_stats(struct net_device *netdev)
 static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 {
        struct igb_adapter *adapter = netdev_priv(netdev);
+       struct pci_dev *pdev = adapter->pdev;
        int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
        u32 rx_buffer_len, i;
 
        if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
            (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-               dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+               dev_err(&pdev->dev, "Invalid MTU setting\n");
                return -EINVAL;
        }
 
        if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-               dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+               dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
                return -EINVAL;
        }
 
@@ -3739,7 +3741,7 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu)
        if (netif_running(netdev))
                igb_down(adapter);
 
-       dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+       dev_info(&pdev->dev, "changing MTU from %d to %d\n",
                 netdev->mtu, new_mtu);
        netdev->mtu = new_mtu;
 
@@ -4053,6 +4055,7 @@ static int __igb_notify_dca(struct device *dev, void *data)
 {
        struct net_device *netdev = dev_get_drvdata(dev);
        struct igb_adapter *adapter = netdev_priv(netdev);
+       struct pci_dev *pdev = adapter->pdev;
        struct e1000_hw *hw = &adapter->hw;
        unsigned long event = *(unsigned long *)data;
 
@@ -4061,12 +4064,9 @@ static int __igb_notify_dca(struct device *dev, void *data)
                /* if already enabled, don't do it again */
                if (adapter->flags & IGB_FLAG_DCA_ENABLED)
                        break;
-               /* Always use CB2 mode, difference is masked
-                * in the CB driver. */
-               wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
                if (dca_add_requester(dev) == 0) {
                        adapter->flags |= IGB_FLAG_DCA_ENABLED;
-                       dev_info(&adapter->pdev->dev, "DCA enabled\n");
+                       dev_info(&pdev->dev, "DCA enabled\n");
                        igb_setup_dca(adapter);
                        break;
                }
@@ -4076,7 +4076,7 @@ static int __igb_notify_dca(struct device *dev, void *data)
                        /* without this a class_device is left
                         * hanging around in the sysfs model */
                        dca_remove_requester(dev);
-                       dev_info(&adapter->pdev->dev, "DCA disabled\n");
+                       dev_info(&pdev->dev, "DCA disabled\n");
                        adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
                        wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
                }
@@ -4471,7 +4471,7 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
                retval = igb_set_vf_vlan(adapter, msgbuf, vf);
                break;
        default:
-               dev_err(&adapter->pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+               dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
                retval = -1;
                break;
        }
@@ -5472,6 +5472,7 @@ static void igb_restore_vlan(struct igb_adapter *adapter)
 
 int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
 {
+       struct pci_dev *pdev = adapter->pdev;
        struct e1000_mac_info *mac = &adapter->hw.mac;
 
        mac->autoneg = 0;
@@ -5495,8 +5496,7 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
                break;
        case SPEED_1000 + DUPLEX_HALF: /* not supported */
        default:
-               dev_err(&adapter->pdev->dev,
-                       "Unsupported Speed/Duplex configuration\n");
+               dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
                return -EINVAL;
        }
        return 0;