dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
/* Read current plug data */
- err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
+ err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
dev_dbg(dev, "Read PDA returned %d\n", err);
if (err)
goto free;
}
/* Enable aux port to allow programming */
- err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+ err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point));
dev_dbg(dev, "Program init returned %d\n", err);
if (err != 0)
goto abort;
goto abort;
/* Tell card we've finished */
- err = hermesi_program_end(hw);
+ err = hw->ops->program_end(hw);
dev_dbg(dev, "Program end returned %d\n", err);
if (err != 0)
goto abort;
if (!pda)
return -ENOMEM;
- ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
+ ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
if (ret)
goto free;
}
#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
/*
+ * AUX port access. To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register. Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
+#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0 0xFE01
+#define HERMES_AUX_PW1 0xDC23
+#define HERMES_AUX_PW2 0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
+/*
* Debugging helpers
*/
hw->iobase = address;
hw->reg_spacing = reg_spacing;
hw->inten = 0x0;
+ hw->eeprom_pda = false;
hw->ops = &hermes_ops_local;
}
EXPORT_SYMBOL(hermes_struct_init);
return err;
}
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+ hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+ hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+ int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+ int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+ int i;
+
+ /* Already open? */
+ if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+ return 0;
+
+ hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+ hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+ hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+ hermes_write_reg(hw, HERMES_CONTROL, action);
+
+ for (i = 0; i < 20; i++) {
+ udelay(10);
+ if (hermes_read_reg(hw, HERMES_CONTROL) ==
+ desired_state)
+ return 0;
+ }
+
+ return -EBUSY;
+}
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using init_cmd_wait rather than cmd_wait */
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ pr_debug("Enabling volatile, EP 0x%08x\n", offset);
+ err = hw->ops->init_cmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ pr_debug("PROGRAM_ENABLE returned %d\n", err);
+
+ return err;
+}
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_end(hermes_t *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ pr_debug("PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+
+static int hermes_program_bytes(struct hermes *hw, const char *data,
+ u32 addr, u32 len)
+{
+ /* wl lkm splits the programming into chunks of 2000 bytes.
+ * This restriction appears to come from USB. The PCMCIA
+ * adapters can program the whole lot in one go */
+ hermes_aux_setaddr(hw, addr);
+ hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
+ return 0;
+}
+
+/* Read PDA from the adapter */
+static int hermes_read_pda(hermes_t *hw, __le16 *pda, u32 pda_addr, u16 pda_len)
+{
+ int ret;
+ u16 pda_size;
+ u16 data_len = pda_len;
+ __le16 *data = pda;
+
+ if (hw->eeprom_pda) {
+ /* PDA of spectrum symbol is in eeprom */
+
+ /* Issue command to read EEPROM */
+ ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+ if (ret)
+ return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
+ }
+
+ /* Open auxiliary port */
+ ret = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", ret);
+ if (ret)
+ return ret;
+
+ /* Read PDA */
+ hermes_aux_setaddr(hw, pda_addr);
+ hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+ /* Close aux port */
+ ret = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", ret);
+
+ /* Check PDA length */
+ pda_size = le16_to_cpu(pda[0]);
+ pr_debug("Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
+ if (pda_size > pda_len)
+ return -EINVAL;
+
+ return 0;
+}
+
static void hermes_lock_irqsave(spinlock_t *lock,
unsigned long *flags) __acquires(lock)
{
.write_ltv = hermes_write_ltv,
.bap_pread = hermes_bap_pread,
.bap_pwrite = hermes_bap_pwrite,
+ .read_pda = hermes_read_pda,
+ .program_init = hermesi_program_init,
+ .program_end = hermesi_program_end,
+ .program = hermes_program_bytes,
.lock_irqsave = hermes_lock_irqsave,
.unlock_irqrestore = hermes_unlock_irqrestore,
.lock_irq = hermes_lock_irq,
u16 id, u16 offset);
int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
int len, u16 id, u16 offset);
+ int (*read_pda)(struct hermes *hw, __le16 *pda,
+ u32 pda_addr, u16 pda_len);
+ int (*program_init)(struct hermes *hw, u32 entry_point);
+ int (*program_end)(struct hermes *hw);
+ int (*program)(struct hermes *hw, const char *buf,
+ u32 addr, u32 len);
void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
void (*lock_irq)(spinlock_t *lock);
#define HERMES_16BIT_REGSPACING 0
#define HERMES_32BIT_REGSPACING 1
u16 inten; /* Which interrupts should be enabled? */
+ bool eeprom_pda;
const struct hermes_ops *ops;
void *priv;
} hermes_t;
#define PFX "hermes_dld: "
-/*
- * AUX port access. To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register. Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
-#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0 0xFE01
-#define HERMES_AUX_PW1 0xDC23
-#define HERMES_AUX_PW2 0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
-
/* End markers used in dblocks */
#define PDI_END 0x00000000 /* End of PDA */
#define BLOCK_END 0xFFFFFFFF /* Last image block */
#define TEXT_END 0x1A /* End of text header */
-/* Limit the amout we try to download in a single shot.
- * Size is in bytes.
- */
-#define MAX_DL_SIZE 1024
-#define LIMIT_PROGRAM_SIZE 0
-
/*
* The following structures have little-endian fields denoted by
* the leading underscore. Don't access them directly - use inline
return 2 * (le16_to_cpu(pdi->len) - 1);
}
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(hermes_t *hw, u32 addr)
-{
- hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
- hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(hermes_t *hw, int enabled)
-{
- int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
- int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
- int i;
-
- /* Already open? */
- if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
- return 0;
-
- hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
- hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
- hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
- hermes_write_reg(hw, HERMES_CONTROL, action);
-
- for (i = 0; i < 20; i++) {
- udelay(10);
- if (hermes_read_reg(hw, HERMES_CONTROL) ==
- desired_state)
- return 0;
- }
-
- return -EBUSY;
-}
-
/*** Plug Data Functions ***/
/*
return -EINVAL;
/* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
- return 0;
-}
-
-/* Read PDA from the adapter */
-int hermes_read_pda(hermes_t *hw,
- __le16 *pda,
- u32 pda_addr,
- u16 pda_len,
- int use_eeprom) /* can we get this into hw? */
-{
- int ret;
- u16 pda_size;
- u16 data_len = pda_len;
- __le16 *data = pda;
-
- if (use_eeprom) {
- /* PDA of spectrum symbol is in eeprom */
-
- /* Issue command to read EEPROM */
- ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
- if (ret)
- return ret;
- } else {
- /* wl_lkm does not include PDA size in the PDA area.
- * We will pad the information into pda, so other routines
- * don't have to be modified */
- pda[0] = cpu_to_le16(pda_len - 2);
- /* Includes CFG_PROD_DATA but not itself */
- pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
- data_len = pda_len - 4;
- data = pda + 2;
- }
-
- /* Open auxiliary port */
- ret = hermes_aux_control(hw, 1);
- pr_debug(PFX "AUX enable returned %d\n", ret);
- if (ret)
- return ret;
-
- /* read PDA from EEPROM */
- hermes_aux_setaddr(hw, pda_addr);
- hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
- /* Close aux port */
- ret = hermes_aux_control(hw, 0);
- pr_debug(PFX "AUX disable returned %d\n", ret);
-
- /* Check PDA length */
- pda_size = le16_to_cpu(pda[0]);
- pr_debug(PFX "Actual PDA length %d, Max allowed %d\n",
- pda_size, pda_len);
- if (pda_size > pda_len)
- return -EINVAL;
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
return 0;
}
/*** Hermes programming ***/
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_init(hermes_t *hw, u32 offset)
-{
- int err;
-
- /* Disable interrupts?*/
- /*hw->inten = 0x0;*/
- /*hermes_write_regn(hw, INTEN, 0);*/
- /*hermes_set_irqmask(hw, 0);*/
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Using init_cmd_wait rather than cmd_wait */
- err = hw->ops->init_cmd_wait(hw,
- 0x0100 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hw->ops->init_cmd_wait(hw,
- 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_aux_control(hw, 1);
- pr_debug(PFX "AUX enable returned %d\n", err);
-
- if (err)
- return err;
-
- pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset);
- err = hw->ops->init_cmd_wait(hw,
- HERMES_PROGRAM_ENABLE_VOLATILE,
- offset & 0xFFFFu,
- offset >> 16,
- 0,
- NULL);
- pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err);
-
- return err;
-}
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_end(hermes_t *hw)
-{
- struct hermes_response resp;
- int rc = 0;
- int err;
-
- rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
- pr_debug(PFX "PROGRAM_DISABLE returned %d, "
- "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
- rc, resp.resp0, resp.resp1, resp.resp2);
-
- if ((rc == 0) &&
- ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
- rc = -EIO;
-
- err = hermes_aux_control(hw, 0);
- pr_debug(PFX "AUX disable returned %d\n", err);
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Reinitialise, ignoring return */
- (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
-
- return rc ? rc : err;
-}
-
/* Program the data blocks */
int hermes_program(hermes_t *hw, const char *first_block, const void *end)
{
const struct dblock *blk;
u32 blkaddr;
u32 blklen;
-#if LIMIT_PROGRAM_SIZE
- u32 addr;
- u32 len;
-#endif
+ int err = 0;
blk = (const struct dblock *) first_block;
pr_debug(PFX "Programming block of length %d "
"to address 0x%08x\n", blklen, blkaddr);
-#if !LIMIT_PROGRAM_SIZE
- /* wl_lkm driver splits this into writes of 2000 bytes */
- hermes_aux_setaddr(hw, blkaddr);
- hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
- blklen);
-#else
- len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
- addr = blkaddr;
-
- while (addr < (blkaddr + blklen)) {
- pr_debug(PFX "Programming subblock of length %d "
- "to address 0x%08x. Data @ %p\n",
- len, addr, &blk->data[addr - blkaddr]);
-
- hermes_aux_setaddr(hw, addr);
- hermes_write_bytes(hw, HERMES_AUXDATA,
- &blk->data[addr - blkaddr],
- len);
-
- addr += len;
- len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
- (blkaddr + blklen - addr) : MAX_DL_SIZE;
- }
-#endif
+ err = hw->ops->program(hw, blk->data, blkaddr, blklen);
+ if (err)
+ break;
+
blk = (const struct dblock *) &blk->data[blklen];
if ((void *) blk > (end - sizeof(*blk)))
blkaddr = dblock_addr(blk);
blklen = dblock_len(blk);
}
- return 0;
+ return err;
}
/*** Default plugging data for Hermes I ***/
if ((pdi_len(pdi) == pdr_len(pdr)) &&
((void *) pdi->data + pdi_len(pdi) < pda_end)) {
/* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA,
- pdi->data, pdi_len(pdi));
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr),
+ pdi_len(pdi));
}
}
#define EZUSB_RID_RX 0x0701
#define EZUSB_RID_INIT1 0x0702
#define EZUSB_RID_ACK 0x0710
+#define EZUSB_RID_READ_PDA 0x0800
+#define EZUSB_RID_PROG_INIT 0x0852
+#define EZUSB_RID_PROG_SET_ADDR 0x0853
+#define EZUSB_RID_PROG_BYTES 0x0854
+#define EZUSB_RID_PROG_END 0x0855
#define EZUSB_RID_DOCMD 0x0860
/* Recognize info frames */
#define BULK_BUF_SIZE 2048
+#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet))
+
#define FW_BUF_SIZE 64
#define FW_VAR_OFFSET_PTR 0x359
#define FW_VAR_VALUE 0
return 0;
}
+static int ezusb_read_pda(struct hermes *hw, __le16 *pda,
+ u32 pda_addr, u16 pda_len)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le16 data[] = {
+ cpu_to_le16(pda_addr & 0xffff),
+ cpu_to_le16(pda_len - 4)
+ };
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA);
+ if (!ctx)
+ return -ENOMEM;
+
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4,
+ NULL);
+}
+
+static int ezusb_program_init(struct hermes *hw, u32 entry_point)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le32 data = cpu_to_le32(entry_point);
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_end(struct hermes *hw)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, 0, NULL,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_bytes(struct hermes *hw, const char *buf,
+ u32 addr, u32 len)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le32 data = cpu_to_le32(addr);
+ int err;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+ if (err)
+ return err;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, len, buf,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program(struct hermes *hw, const char *buf,
+ u32 addr, u32 len)
+{
+ u32 ch_addr;
+ u32 ch_len;
+ int err = 0;
+
+ /* We can only send 2048 bytes out of the bulk xmit at a time,
+ * so we have to split any programming into chunks of <2048
+ * bytes. */
+
+ ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE;
+ ch_addr = addr;
+
+ while (ch_addr < (addr + len)) {
+ pr_debug("Programming subblock of length %d "
+ "to address 0x%08x. Data @ %p\n",
+ ch_len, ch_addr, &buf[ch_addr - addr]);
+
+ err = ezusb_program_bytes(hw, &buf[ch_addr - addr],
+ ch_addr, ch_len);
+ if (err)
+ break;
+
+ ch_addr += ch_len;
+ ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ?
+ (addr + len - ch_addr) : MAX_DL_SIZE;
+ }
+
+ return err;
+}
+
static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
.read_ltv = ezusb_read_ltv,
.write_ltv = ezusb_write_ltv,
.bap_pread = ezusb_bap_pread,
+ .read_pda = ezusb_read_pda,
+ .program_init = ezusb_program_init,
+ .program_end = ezusb_program_end,
+ .program = ezusb_program,
.lock_irqsave = ezusb_lock_irqsave,
.unlock_irqrestore = ezusb_unlock_irqrestore,
.lock_irq = ezusb_lock_irq,
goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ hw->eeprom_pda = true;
/*
* This actually configures the PCMCIA socket -- setting up
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff