ocfs2: Support commit= mount option
authorMark Fasheh <mark.fasheh@oracle.com>
Wed, 7 Nov 2007 22:40:36 +0000 (14:40 -0800)
committerMark Fasheh <mark.fasheh@oracle.com>
Fri, 25 Jan 2008 23:05:42 +0000 (15:05 -0800)
Mostly taken from ext3. This allows the user to set the jbd commit interval,
in seconds. The default of 5 seconds stays the same, but now users can
easily increase the commit interval. Typically, this would be increased in
order to benefit performance at the expense of data-safety.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Documentation/filesystems/ocfs2.txt
fs/ocfs2/journal.c
fs/ocfs2/ocfs2.h
fs/ocfs2/super.c

index e78abdc..b63bd2d 100644 (file)
@@ -61,3 +61,14 @@ data=writeback               Data ordering is not preserved, data may be written
 preferred_slot=0(*)    During mount, try to use this filesystem slot first. If
                        it is in use by another node, the first empty one found
                        will be chosen. Invalid values will be ignored.
 preferred_slot=0(*)    During mount, try to use this filesystem slot first. If
                        it is in use by another node, the first empty one found
                        will be chosen. Invalid values will be ignored.
+commit=nrsec   (*)     Ocfs2 can be told to sync all its data and metadata
+                       every 'nrsec' seconds. The default value is 5 seconds.
+                       This means that if you lose your power, you will lose
+                       as much as the latest 5 seconds of work (your
+                       filesystem will not be damaged though, thanks to the
+                       journaling).  This default value (or any low value)
+                       will hurt performance, but it's good for data-safety.
+                       Setting it to 0 will have the same effect as leaving
+                       it at the default (5 seconds).
+                       Setting it to very large values will improve
+                       performance.
index 4f440a8..8b9ce2a 100644 (file)
@@ -313,14 +313,18 @@ int ocfs2_journal_dirty_data(handle_t *handle,
        return err;
 }
 
        return err;
 }
 
-#define OCFS2_DEFAULT_COMMIT_INTERVAL  (HZ * 5)
+#define OCFS2_DEFAULT_COMMIT_INTERVAL  (HZ * JBD_DEFAULT_MAX_COMMIT_AGE)
 
 void ocfs2_set_journal_params(struct ocfs2_super *osb)
 {
        journal_t *journal = osb->journal->j_journal;
 
 void ocfs2_set_journal_params(struct ocfs2_super *osb)
 {
        journal_t *journal = osb->journal->j_journal;
+       unsigned long commit_interval = OCFS2_DEFAULT_COMMIT_INTERVAL;
+
+       if (osb->osb_commit_interval)
+               commit_interval = osb->osb_commit_interval;
 
        spin_lock(&journal->j_state_lock);
 
        spin_lock(&journal->j_state_lock);
-       journal->j_commit_interval = OCFS2_DEFAULT_COMMIT_INTERVAL;
+       journal->j_commit_interval = commit_interval;
        if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER)
                journal->j_flags |= JFS_BARRIER;
        else
        if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER)
                journal->j_flags |= JFS_BARRIER;
        else
index f8f8661..82802f5 100644 (file)
@@ -229,6 +229,7 @@ struct ocfs2_super
        wait_queue_head_t checkpoint_event;
        atomic_t needs_checkpoint;
        struct ocfs2_journal *journal;
        wait_queue_head_t checkpoint_event;
        atomic_t needs_checkpoint;
        struct ocfs2_journal *journal;
+       unsigned long osb_commit_interval;
 
        enum ocfs2_local_alloc_state local_alloc_state;
        struct buffer_head *local_alloc_bh;
 
        enum ocfs2_local_alloc_state local_alloc_state;
        struct buffer_head *local_alloc_bh;
index 479ac50..8044ed9 100644 (file)
@@ -83,6 +83,7 @@ MODULE_LICENSE("GPL");
 
 struct mount_options
 {
 
 struct mount_options
 {
+       unsigned long   commit_interval;
        unsigned long   mount_opt;
        unsigned int    atime_quantum;
        signed short    slot;
        unsigned long   mount_opt;
        unsigned int    atime_quantum;
        signed short    slot;
@@ -149,6 +150,7 @@ enum {
        Opt_data_writeback,
        Opt_atime_quantum,
        Opt_slot,
        Opt_data_writeback,
        Opt_atime_quantum,
        Opt_slot,
+       Opt_commit,
        Opt_err,
 };
 
        Opt_err,
 };
 
@@ -164,6 +166,7 @@ static match_table_t tokens = {
        {Opt_data_writeback, "data=writeback"},
        {Opt_atime_quantum, "atime_quantum=%u"},
        {Opt_slot, "preferred_slot=%u"},
        {Opt_data_writeback, "data=writeback"},
        {Opt_atime_quantum, "atime_quantum=%u"},
        {Opt_slot, "preferred_slot=%u"},
+       {Opt_commit, "commit=%u"},
        {Opt_err, NULL}
 };
 
        {Opt_err, NULL}
 };
 
@@ -442,6 +445,8 @@ unlock_osb:
                osb->s_mount_opt = parsed_options.mount_opt;
                osb->s_atime_quantum = parsed_options.atime_quantum;
                osb->preferred_slot = parsed_options.slot;
                osb->s_mount_opt = parsed_options.mount_opt;
                osb->s_atime_quantum = parsed_options.atime_quantum;
                osb->preferred_slot = parsed_options.slot;
+               if (parsed_options.commit_interval)
+                       osb->osb_commit_interval = parsed_options.commit_interval;
 
                if (!ocfs2_is_hard_readonly(osb))
                        ocfs2_set_journal_params(osb);
 
                if (!ocfs2_is_hard_readonly(osb))
                        ocfs2_set_journal_params(osb);
@@ -596,6 +601,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
        osb->s_mount_opt = parsed_options.mount_opt;
        osb->s_atime_quantum = parsed_options.atime_quantum;
        osb->preferred_slot = parsed_options.slot;
        osb->s_mount_opt = parsed_options.mount_opt;
        osb->s_atime_quantum = parsed_options.atime_quantum;
        osb->preferred_slot = parsed_options.slot;
+       osb->osb_commit_interval = parsed_options.commit_interval;
 
        sb->s_magic = OCFS2_SUPER_MAGIC;
 
 
        sb->s_magic = OCFS2_SUPER_MAGIC;
 
@@ -746,6 +752,7 @@ static int ocfs2_parse_options(struct super_block *sb,
        mlog_entry("remount: %d, options: \"%s\"\n", is_remount,
                   options ? options : "(none)");
 
        mlog_entry("remount: %d, options: \"%s\"\n", is_remount,
                   options ? options : "(none)");
 
+       mopt->commit_interval = 0;
        mopt->mount_opt = 0;
        mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM;
        mopt->slot = OCFS2_INVALID_SLOT;
        mopt->mount_opt = 0;
        mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM;
        mopt->slot = OCFS2_INVALID_SLOT;
@@ -815,6 +822,18 @@ static int ocfs2_parse_options(struct super_block *sb,
                        if (option)
                                mopt->slot = (s16)option;
                        break;
                        if (option)
                                mopt->slot = (s16)option;
                        break;
+               case Opt_commit:
+                       option = 0;
+                       if (match_int(&args[0], &option)) {
+                               status = 0;
+                               goto bail;
+                       }
+                       if (option < 0)
+                               return 0;
+                       if (option == 0)
+                               option = JBD_DEFAULT_MAX_COMMIT_AGE;
+                       mopt->commit_interval = HZ * option;
+                       break;
                default:
                        mlog(ML_ERROR,
                             "Unrecognized mount option \"%s\" "
                default:
                        mlog(ML_ERROR,
                             "Unrecognized mount option \"%s\" "
@@ -863,6 +882,10 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
        if (osb->s_atime_quantum != OCFS2_DEFAULT_ATIME_QUANTUM)
                seq_printf(s, ",atime_quantum=%u", osb->s_atime_quantum);
 
        if (osb->s_atime_quantum != OCFS2_DEFAULT_ATIME_QUANTUM)
                seq_printf(s, ",atime_quantum=%u", osb->s_atime_quantum);
 
+       if (osb->osb_commit_interval)
+               seq_printf(s, ",commit=%u",
+                          (unsigned) (osb->osb_commit_interval / HZ));
+
        return 0;
 }
 
        return 0;
 }