[PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs and 2400A...
authorMarkus Lidel <Markus.Lidel@shadowconnect.com>
Fri, 24 Jun 2005 05:02:19 +0000 (22:02 -0700)
committerLinus Torvalds <torvalds@ppc970.osdl.org>
Fri, 24 Jun 2005 07:05:28 +0000 (00:05 -0700)
Changes:
 - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec
   controllers
 - Use PRIVATE messages in SCSI-OSM because on some controllers normal
   SCSI class commands like READ or READ CAPACITY cause errors
 - Use new DMA and SG list creation function
 - Added workaround to limit sectors per request for Adaptec 2400A
   controllers

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/message/i2o/Kconfig
drivers/message/i2o/i2o_block.h
drivers/message/i2o/i2o_config.c
drivers/message/i2o/i2o_scsi.c
drivers/message/i2o/pci.c
include/linux/i2o-dev.h
include/linux/i2o.h
include/scsi/sg_request.h [new file with mode: 0644]

index ce278e0..94b6d67 100644 (file)
@@ -24,6 +24,24 @@ config I2O
 
          If unsure, say N.
 
 
          If unsure, say N.
 
+config I2O_EXT_ADAPTEC
+       bool "Enable Adaptec extensions"
+       depends on I2O
+       default y
+       ---help---
+         Say Y for support of raidutils for Adaptec I2O controllers. You also
+         have to say Y to "I2O Configuration support", "I2O SCSI OSM" below
+         and to "SCSI generic support" under "SCSI device configuration".
+
+config I2O_EXT_ADAPTEC_DMA64
+       bool "Enable 64-bit DMA"
+       depends on I2O_EXT_ADAPTEC && ( 64BIT || HIGHMEM64G )
+       default y
+       ---help---
+         Say Y for support of 64-bit DMA transfer mode on Adaptec I2O
+         controllers.
+         Note: You need at least firmware version 3709.
+
 config I2O_CONFIG
        tristate "I2O Configuration support"
        depends on PCI && I2O
 config I2O_CONFIG
        tristate "I2O Configuration support"
        depends on PCI && I2O
index 9e1a95f..e45cc40 100644 (file)
 #define I2O_BLOCK_RETRY_TIME HZ/4
 #define I2O_BLOCK_MAX_OPEN_REQUESTS 50
 
 #define I2O_BLOCK_RETRY_TIME HZ/4
 #define I2O_BLOCK_MAX_OPEN_REQUESTS 50
 
+/* request queue sizes */
+#define I2O_BLOCK_REQ_MEMPOOL_SIZE             32
+
+#define KERNEL_SECTOR_SHIFT 9
+#define KERNEL_SECTOR_SIZE (1 << KERNEL_SECTOR_SHIFT)
+
 /* I2O Block OSM mempool struct */
 struct i2o_block_mempool {
        kmem_cache_t    *slab;
 /* I2O Block OSM mempool struct */
 struct i2o_block_mempool {
        kmem_cache_t    *slab;
index 849d90a..7636833 100644 (file)
@@ -515,6 +515,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp)
        return 0;
 }
 
        return 0;
 }
 
+#ifdef CONFIG_I2O_EXT_ADAPTEC
 #ifdef CONFIG_COMPAT
 static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
 {
 #ifdef CONFIG_COMPAT
 static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
 {
@@ -964,6 +965,7 @@ static int i2o_cfg_passthru(unsigned long arg)
        kfree(reply);
        return rcode;
 }
        kfree(reply);
        return rcode;
 }
+#endif
 
 /*
  * IOCTL Handler
 
 /*
  * IOCTL Handler
@@ -1018,9 +1020,11 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
                ret = i2o_cfg_evt_get(arg, fp);
                break;
 
                ret = i2o_cfg_evt_get(arg, fp);
                break;
 
+#ifdef CONFIG_I2O_EXT_ADAPTEC
        case I2OPASSTHRU:
                ret = i2o_cfg_passthru(arg);
                break;
        case I2OPASSTHRU:
                ret = i2o_cfg_passthru(arg);
                break;
+#endif
 
        default:
                osm_debug("unknown ioctl called!\n");
 
        default:
                osm_debug("unknown ioctl called!\n");
index c3b0c29..fef53b5 100644 (file)
@@ -55,6 +55,7 @@
 #include <linux/pci.h>
 #include <linux/blkdev.h>
 #include <linux/i2o.h>
 #include <linux/pci.h>
 #include <linux/blkdev.h>
 #include <linux/i2o.h>
+#include <linux/scatterlist.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_request.h>
+#include <scsi/sg.h>
+#include <scsi/sg_request.h>
 
 #define OSM_NAME       "scsi-osm"
 
 #define OSM_NAME       "scsi-osm"
-#define OSM_VERSION    "$Rev$"
+#define OSM_VERSION    "1.282"
 #define OSM_DESCRIPTION        "I2O SCSI Peripheral OSM"
 
 static struct i2o_driver i2o_scsi_driver;
 
 #define OSM_DESCRIPTION        "I2O SCSI Peripheral OSM"
 
 static struct i2o_driver i2o_scsi_driver;
 
-static int i2o_scsi_max_id = 16;
-static int i2o_scsi_max_lun = 8;
+static unsigned int i2o_scsi_max_id = 16;
+static unsigned int i2o_scsi_max_lun = 255;
 
 struct i2o_scsi_host {
        struct Scsi_Host *scsi_host;    /* pointer to the SCSI host */
        struct i2o_controller *iop;     /* pointer to the I2O controller */
 
 struct i2o_scsi_host {
        struct Scsi_Host *scsi_host;    /* pointer to the SCSI host */
        struct i2o_controller *iop;     /* pointer to the I2O controller */
+       unsigned int lun;       /* lun's used for block devices */
        struct i2o_device *channel[0];  /* channel->i2o_dev mapping table */
 };
 
        struct i2o_device *channel[0];  /* channel->i2o_dev mapping table */
 };
 
@@ -100,12 +105,17 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
        u8 type;
        int i;
        size_t size;
        u8 type;
        int i;
        size_t size;
-       i2o_status_block *sb;
+       u16 body_size = 6;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+       if (c->adaptec)
+               body_size = 8;
+#endif
 
        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
                if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
 
        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
                if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
-                  && (type == 0x01))   /* SCSI bus */
+                   && (type == 0x01))  /* SCSI bus */
                        max_channel++;
        }
 
                        max_channel++;
        }
 
@@ -127,20 +137,18 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
        scsi_host->max_id = i2o_scsi_max_id;
        scsi_host->max_lun = i2o_scsi_max_lun;
        scsi_host->this_id = c->unit;
        scsi_host->max_id = i2o_scsi_max_id;
        scsi_host->max_lun = i2o_scsi_max_lun;
        scsi_host->this_id = c->unit;
-
-       sb = c->status_block.virt;
-
-       scsi_host->sg_tablesize = (sb->inbound_frame_size -
-                                  sizeof(struct i2o_message) / 4 - 6) / 2;
+       scsi_host->sg_tablesize = i2o_sg_tablesize(c, body_size);
 
        i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
        i2o_shost->scsi_host = scsi_host;
        i2o_shost->iop = c;
 
        i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
        i2o_shost->scsi_host = scsi_host;
        i2o_shost->iop = c;
+       i2o_shost->lun = 1;
 
        i = 0;
        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
 
        i = 0;
        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
-               if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1))    /* only SCSI bus */
+               if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
+                   && (type == 0x01))  /* only SCSI bus */
                        i2o_shost->channel[i++] = i2o_dev;
 
                if (i >= max_channel)
                        i2o_shost->channel[i++] = i2o_dev;
 
                if (i >= max_channel)
@@ -212,8 +220,8 @@ static int i2o_scsi_probe(struct device *dev)
        struct Scsi_Host *scsi_host;
        struct i2o_device *parent;
        struct scsi_device *scsi_dev;
        struct Scsi_Host *scsi_host;
        struct i2o_device *parent;
        struct scsi_device *scsi_dev;
-       u32 id;
-       u64 lun;
+       u32 id = -1;
+       u64 lun = -1;
        int channel = -1;
        int i;
 
        int channel = -1;
        int i;
 
@@ -223,8 +231,56 @@ static int i2o_scsi_probe(struct device *dev)
 
        scsi_host = i2o_shost->scsi_host;
 
 
        scsi_host = i2o_shost->scsi_host;
 
-       if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0)
+       switch (i2o_dev->lct_data.class_id) {
+       case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+       case I2O_CLASS_EXECUTIVE:
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+               if (c->adaptec) {
+                       u8 type;
+                       struct i2o_device *d = i2o_shost->channel[0];
+
+                       if (i2o_parm_field_get(d, 0x0000, 0, &type, 1)
+                           && (type == 0x01))  /* SCSI bus */
+                               if (i2o_parm_field_get(d, 0x0200, 4, &id, 4)) {
+                                       channel = 0;
+                                       if (i2o_dev->lct_data.class_id ==
+                                           I2O_CLASS_RANDOM_BLOCK_STORAGE)
+                                               lun = i2o_shost->lun++;
+                                       else
+                                               lun = 0;
+                               }
+               }
+#endif
+               break;
+
+       case I2O_CLASS_SCSI_PERIPHERAL:
+               if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4) < 0)
+                       return -EFAULT;
+
+               if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8) < 0)
+                       return -EFAULT;
+
+               parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
+               if (!parent) {
+                       osm_warn("can not find parent of device %03x\n",
+                                i2o_dev->lct_data.tid);
+                       return -EFAULT;
+               }
+
+               for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
+                       if (i2o_shost->channel[i] == parent)
+                               channel = i;
+               break;
+
+       default:
+               return -EFAULT;
+       }
+
+       if (channel == -1) {
+               osm_warn("can not find channel of device %03x\n",
+                        i2o_dev->lct_data.tid);
                return -EFAULT;
                return -EFAULT;
+       }
 
        if (id >= scsi_host->max_id) {
                osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id,
 
        if (id >= scsi_host->max_id) {
                osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id,
@@ -232,31 +288,12 @@ static int i2o_scsi_probe(struct device *dev)
                return -EFAULT;
        }
 
                return -EFAULT;
        }
 
-       if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0)
-               return -EFAULT;
        if (lun >= scsi_host->max_lun) {
                osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)",
                         (unsigned int)lun, scsi_host->max_lun);
                return -EFAULT;
        }
 
        if (lun >= scsi_host->max_lun) {
                osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)",
                         (unsigned int)lun, scsi_host->max_lun);
                return -EFAULT;
        }
 
-       parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
-       if (!parent) {
-               osm_warn("can not find parent of device %03x\n",
-                        i2o_dev->lct_data.tid);
-               return -EFAULT;
-       }
-
-       for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
-               if (i2o_shost->channel[i] == parent)
-                       channel = i;
-
-       if (channel == -1) {
-               osm_warn("can not find channel of device %03x\n",
-                        i2o_dev->lct_data.tid);
-               return -EFAULT;
-       }
-
        scsi_dev =
            __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
 
        scsi_dev =
            __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
 
@@ -266,7 +303,8 @@ static int i2o_scsi_probe(struct device *dev)
                return PTR_ERR(scsi_dev);
        }
 
                return PTR_ERR(scsi_dev);
        }
 
-       sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi");
+       sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj,
+                         "scsi");
 
        osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n",
                 i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
 
        osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n",
                 i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
@@ -542,9 +580,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
                                 void (*done) (struct scsi_cmnd *))
 {
        struct i2o_controller *c;
                                 void (*done) (struct scsi_cmnd *))
 {
        struct i2o_controller *c;
-       struct Scsi_Host *host;
        struct i2o_device *i2o_dev;
        struct i2o_device *i2o_dev;
-       struct device *dev;
        int tid;
        struct i2o_message __iomem *msg;
        u32 m;
        int tid;
        struct i2o_message __iomem *msg;
        u32 m;
@@ -554,20 +590,16 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
         * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
         */
        u32 scsi_flags = 0x20a00000;
         * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
         */
        u32 scsi_flags = 0x20a00000;
-       u32 sg_flags;
+       u32 sgl_offset;
        u32 __iomem *mptr;
        u32 __iomem *mptr;
-       u32 __iomem *lenptr;
-       u32 len;
-       int i;
+       u32 cmd = I2O_CMD_SCSI_EXEC << 24;
+       int rc = 0;
 
        /*
         *      Do the incoming paperwork
         */
 
        /*
         *      Do the incoming paperwork
         */
-
        i2o_dev = SCpnt->device->hostdata;
        i2o_dev = SCpnt->device->hostdata;
-       host = SCpnt->device->host;
        c = i2o_dev->iop;
        c = i2o_dev->iop;
-       dev = &c->pdev->dev;
 
        SCpnt->scsi_done = done;
 
 
        SCpnt->scsi_done = done;
 
@@ -575,7 +607,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
                osm_warn("no I2O device in request\n");
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
                osm_warn("no I2O device in request\n");
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
-               return 0;
+               goto exit;
        }
 
        tid = i2o_dev->lct_data.tid;
        }
 
        tid = i2o_dev->lct_data.tid;
@@ -584,46 +616,85 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
        osm_debug("Real scsi messages.\n");
 
        /*
        osm_debug("Real scsi messages.\n");
 
        /*
-        *      Obtain an I2O message. If there are none free then
-        *      throw it back to the scsi layer
-        */
-
-       m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-       if (m == I2O_QUEUE_EMPTY)
-               return SCSI_MLQUEUE_HOST_BUSY;
-
-       mptr = &msg->body[0];
-
-       /*
         *      Put together a scsi execscb message
         */
         *      Put together a scsi execscb message
         */
-
        switch (SCpnt->sc_data_direction) {
        case PCI_DMA_NONE:
                /* DATA NO XFER */
        switch (SCpnt->sc_data_direction) {
        case PCI_DMA_NONE:
                /* DATA NO XFER */
-               sg_flags = 0x00000000;
+               sgl_offset = SGL_OFFSET_0;
                break;
 
        case PCI_DMA_TODEVICE:
                /* DATA OUT (iop-->dev) */
                scsi_flags |= 0x80000000;
                break;
 
        case PCI_DMA_TODEVICE:
                /* DATA OUT (iop-->dev) */
                scsi_flags |= 0x80000000;
-               sg_flags = 0x14000000;
+               sgl_offset = SGL_OFFSET_10;
                break;
 
        case PCI_DMA_FROMDEVICE:
                /* DATA IN  (iop<--dev) */
                scsi_flags |= 0x40000000;
                break;
 
        case PCI_DMA_FROMDEVICE:
                /* DATA IN  (iop<--dev) */
                scsi_flags |= 0x40000000;
-               sg_flags = 0x10000000;
+               sgl_offset = SGL_OFFSET_10;
                break;
 
        default:
                /* Unknown - kill the command */
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
                break;
 
        default:
                /* Unknown - kill the command */
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
-               return 0;
+               goto exit;
        }
 
        }
 
-       writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]);
+       /*
+        *      Obtain an I2O message. If there are none free then
+        *      throw it back to the scsi layer
+        */
+
+       m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+       if (m == I2O_QUEUE_EMPTY) {
+               rc = SCSI_MLQUEUE_HOST_BUSY;
+               goto exit;
+       }
+
+       mptr = &msg->body[0];
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+       if (c->adaptec) {
+               u32 adpt_flags = 0;
+
+               if (SCpnt->sc_request && SCpnt->sc_request->upper_private_data) {
+                       i2o_sg_io_hdr_t __user *usr_ptr =
+                           ((Sg_request *) (SCpnt->sc_request->
+                                            upper_private_data))->header.
+                           usr_ptr;
+
+                       if (usr_ptr)
+                               get_user(adpt_flags, &usr_ptr->flags);
+               }
+
+               switch (i2o_dev->lct_data.class_id) {
+               case I2O_CLASS_EXECUTIVE:
+               case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+                       /* interpret flag has to be set for executive */
+                       adpt_flags ^= I2O_DPT_SG_FLAG_INTERPRET;
+                       break;
+
+               default:
+                       break;
+               }
+
+               /*
+                * for Adaptec controllers we use the PRIVATE command, because
+                * the normal SCSI EXEC doesn't support all SCSI commands on
+                * all controllers (for example READ CAPACITY).
+                */
+               if (sgl_offset == SGL_OFFSET_10)
+                       sgl_offset = SGL_OFFSET_12;
+               cmd = I2O_CMD_PRIVATE << 24;
+               writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++);
+               writel(adpt_flags | tid, mptr++);
+       }
+#endif
+
+       writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]);
        writel(i2o_scsi_driver.context, &msg->u.s.icntxt);
 
        /* We want the SCSI control block back */
        writel(i2o_scsi_driver.context, &msg->u.s.icntxt);
 
        /* We want the SCSI control block back */
@@ -655,55 +726,30 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
        /* Write SCSI command into the message - always 16 byte block */
        memcpy_toio(mptr, SCpnt->cmnd, 16);
        mptr += 4;
        /* Write SCSI command into the message - always 16 byte block */
        memcpy_toio(mptr, SCpnt->cmnd, 16);
        mptr += 4;
-       lenptr = mptr++;        /* Remember me - fill in when we know */
-
-       /* Now fill in the SGList and command */
-       if (SCpnt->use_sg) {
-               struct scatterlist *sg;
-               int sg_count;
-
-               sg = SCpnt->request_buffer;
-               len = 0;
 
 
-               sg_count = dma_map_sg(dev, sg, SCpnt->use_sg,
-                                     SCpnt->sc_data_direction);
-
-               if (unlikely(sg_count <= 0))
-                       return -ENOMEM;
-
-               for (i = SCpnt->use_sg; i > 0; i--) {
-                       if (i == 1)
-                               sg_flags |= 0xC0000000;
-                       writel(sg_flags | sg_dma_len(sg), mptr++);
-                       writel(sg_dma_address(sg), mptr++);
-                       len += sg_dma_len(sg);
-                       sg++;
-               }
-
-               writel(len, lenptr);
-       } else {
-               len = SCpnt->request_bufflen;
-
-               writel(len, lenptr);
-
-               if (len > 0) {
-                       dma_addr_t dma_addr;
-
-                       dma_addr = dma_map_single(dev, SCpnt->request_buffer,
-                                                 SCpnt->request_bufflen,
-                                                 SCpnt->sc_data_direction);
-                       if (!dma_addr)
-                               return -ENOMEM;
-
-                       SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr;
-                       sg_flags |= 0xC0000000;
-                       writel(sg_flags | SCpnt->request_bufflen, mptr++);
-                       writel(dma_addr, mptr++);
+       if (sgl_offset != SGL_OFFSET_0) {
+               /* write size of data addressed by SGL */
+               writel(SCpnt->request_bufflen, mptr++);
+
+               /* Now fill in the SGList and command */
+               if (SCpnt->use_sg) {
+                       if (!i2o_dma_map_sg(c, SCpnt->request_buffer,
+                                           SCpnt->use_sg,
+                                           SCpnt->sc_data_direction, &mptr))
+                               goto nomem;
+               } else {
+                       SCpnt->SCp.dma_handle =
+                           i2o_dma_map_single(c, SCpnt->request_buffer,
+                                              SCpnt->request_bufflen,
+                                              SCpnt->sc_data_direction, &mptr);
+                       if (dma_mapping_error(SCpnt->SCp.dma_handle))
+                               goto nomem;
                }
        }
 
        /* Stick the headers on */
                }
        }
 
        /* Stick the headers on */
-       writel((mptr - &msg->u.head[0]) << 16 | SGL_OFFSET_10, &msg->u.head[0]);
+       writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset,
+              &msg->u.head[0]);
 
        /* Queue the message */
        i2o_msg_post(c, m);
 
        /* Queue the message */
        i2o_msg_post(c, m);
@@ -711,6 +757,13 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
        osm_debug("Issued %ld\n", SCpnt->serial_number);
 
        return 0;
        osm_debug("Issued %ld\n", SCpnt->serial_number);
 
        return 0;
+
+      nomem:
+       rc = -ENOMEM;
+       i2o_msg_nop(c, m);
+
+      exit:
+       return rc;
 };
 
 /**
 };
 
 /**
index a499af0..964fe48 100644 (file)
@@ -362,11 +362,33 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
                c->promise = 1;
        }
 
                c->promise = 1;
        }
 
+       if (pdev->subsystem_vendor == PCI_VENDOR_ID_DPT)
+               c->adaptec = 1;
+
        /* Cards that go bananas if you quiesce them before you reset them. */
        if (pdev->vendor == PCI_VENDOR_ID_DPT) {
                c->no_quiesce = 1;
                if (pdev->device == 0xa511)
                        c->raptor = 1;
        /* Cards that go bananas if you quiesce them before you reset them. */
        if (pdev->vendor == PCI_VENDOR_ID_DPT) {
                c->no_quiesce = 1;
                if (pdev->device == 0xa511)
                        c->raptor = 1;
+
+               if (pdev->subsystem_device == 0xc05a) {
+                       c->limit_sectors = 1;
+                       printk(KERN_INFO
+                              "%s: limit sectors per request to %d\n", c->name,
+                              I2O_MAX_SECTORS_LIMITED);
+               }
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+               if (sizeof(dma_addr_t) > 4) {
+                       if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+                               printk(KERN_INFO "%s: 64-bit DMA unavailable\n",
+                                      c->name);
+                       else {
+                               c->pae_support = 1;
+                               printk(KERN_INFO "%s: using 64-bit DMA\n",
+                                      c->name);
+                       }
+               }
+#endif
        }
 
        if ((rc = i2o_pci_alloc(c))) {
        }
 
        if ((rc = i2o_pci_alloc(c))) {
index 90c984e..d4a08d2 100644 (file)
@@ -33,6 +33,13 @@ typedef unsigned int u32;
 #endif                         /* __KERNEL__ */
 
 /*
 #endif                         /* __KERNEL__ */
 
 /*
+ *     Software module types
+ */
+#define I2O_SOFTWARE_MODULE_IRTOS              0x11
+#define I2O_SOFTWARE_MODULE_IOP_PRIVATE                0x22
+#define I2O_SOFTWARE_MODULE_IOP_CONFIG         0x23
+
+/*
  *     Vendors
  */
 #define I2O_VENDOR_DPT                         0x001b
  *     Vendors
  */
 #define I2O_VENDOR_DPT                         0x001b
@@ -125,6 +132,10 @@ struct i2o_evt_get {
        int lost;
 };
 
        int lost;
 };
 
+typedef struct i2o_sg_io_hdr {
+       unsigned int flags;     /* see I2O_DPT_SG_IO_FLAGS */
+} i2o_sg_io_hdr_t;
+
 /**************************************************************************
  * HRT related constants and structures
  **************************************************************************/
 /**************************************************************************
  * HRT related constants and structures
  **************************************************************************/
@@ -403,4 +414,15 @@ typedef struct _i2o_status_block {
 #define ADAPTER_STATE_FAILED                   0x10
 #define ADAPTER_STATE_FAULTED                  0x11
 
 #define ADAPTER_STATE_FAILED                   0x10
 #define ADAPTER_STATE_FAULTED                  0x11
 
+
+/*
+ * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
+ */
+#define I2O_DPT_SG_FLAG_INTERPRET              0x00010000
+#define I2O_DPT_SG_FLAG_PHYSICAL               0x00020000
+
+#define I2O_DPT_FLASH_FRAG_SIZE                        0x10000
+#define I2O_DPT_FLASH_READ                     0x0101
+#define I2O_DPT_FLASH_WRITE                    0x0102
+
 #endif                         /* _I2O_DEV_H */
 #endif                         /* _I2O_DEV_H */
index 497ea57..2039a87 100644 (file)
@@ -147,10 +147,13 @@ struct i2o_controller {
 
        struct pci_dev *pdev;   /* PCI device */
 
 
        struct pci_dev *pdev;   /* PCI device */
 
-       unsigned int short_req:1;       /* use small block sizes */
-       unsigned int no_quiesce:1;      /* dont quiesce before reset */
-       unsigned int raptor:1;          /* split bar */
        unsigned int promise:1;         /* Promise controller */
        unsigned int promise:1;         /* Promise controller */
+       unsigned int adaptec:1;         /* DPT / Adaptec controller */
+       unsigned int raptor:1;  /* split bar */
+       unsigned int no_quiesce:1;      /* dont quiesce before reset */
+       unsigned int short_req:1;       /* use small block sizes */
+       unsigned int limit_sectors:1;   /* limit number of sectors / request */
+       unsigned int pae_support:1;     /* controller has 64-bit SGL support */
 
        struct list_head devices;       /* list of I2O devices */
        struct list_head list;  /* Controller list */
 
        struct list_head devices;       /* list of I2O devices */
        struct list_head list;  /* Controller list */
@@ -746,7 +749,21 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controll
 static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
                                size_t len, unsigned int gfp_mask)
 {
 static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
                                size_t len, unsigned int gfp_mask)
 {
+       struct pci_dev *pdev = to_pci_dev(dev);
+       int dma_64 = 0;
+
+       if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
+                       dma_64 = 1;
+                       if(pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+                               return -ENOMEM;
+       }
+
        addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
        addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+
+       if ((sizeof(dma_addr_t) > 4) && dma_64)
+               if(pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+                       printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
+
        if (!addr->virt)
                return -ENOMEM;
 
        if (!addr->virt)
                return -ENOMEM;
 
@@ -946,7 +963,7 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define I2O_CMD_BLOCK_MEJECT           0x43
 #define I2O_CMD_BLOCK_POWER            0x70
 
 #define I2O_CMD_BLOCK_MEJECT           0x43
 #define I2O_CMD_BLOCK_POWER            0x70
 
-#define I2O_PRIVATE_MSG                        0xFF
+#define I2O_CMD_PRIVATE                        0xFF
 
 /* Command status values  */
 
 
 /* Command status values  */
 
@@ -1095,9 +1112,9 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define SGL_OFFSET_8    (0x0080 | I2OVERSION)
 #define SGL_OFFSET_9    (0x0090 | I2OVERSION)
 #define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
 #define SGL_OFFSET_8    (0x0080 | I2OVERSION)
 #define SGL_OFFSET_9    (0x0090 | I2OVERSION)
 #define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
-
-#define TRL_OFFSET_5    (0x0050 | I2OVERSION)
-#define TRL_OFFSET_6    (0x0060 | I2OVERSION)
+#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
 
 /* Transaction Reply Lists (TRL) Control Word structure */
 #define TRL_SINGLE_FIXED_LENGTH                0x00
 
 /* Transaction Reply Lists (TRL) Control Word structure */
 #define TRL_SINGLE_FIXED_LENGTH                0x00
@@ -1130,7 +1147,6 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define HOST_TID               1
 
 #define MSG_FRAME_SIZE         128     /* i2o_scsi assumes >= 32 */
 #define HOST_TID               1
 
 #define MSG_FRAME_SIZE         128     /* i2o_scsi assumes >= 32 */
-#define REPLY_FRAME_SIZE       17
 #define SG_TABLESIZE           30
 #define NMBR_MSG_FRAMES                128
 
 #define SG_TABLESIZE           30
 #define NMBR_MSG_FRAMES                128
 
@@ -1155,11 +1171,10 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define I2O_HRT_GET_TRIES              3
 #define I2O_LCT_GET_TRIES              3
 
 #define I2O_HRT_GET_TRIES              3
 #define I2O_LCT_GET_TRIES              3
 
-/* request queue sizes */
+/* defines for max_sectors and max_phys_segments */
 #define I2O_MAX_SECTORS                        1024
 #define I2O_MAX_SECTORS                        1024
+#define I2O_MAX_SECTORS_LIMITED                256
 #define I2O_MAX_PHYS_SEGMENTS          MAX_PHYS_SEGMENTS
 
 #define I2O_MAX_PHYS_SEGMENTS          MAX_PHYS_SEGMENTS
 
-#define I2O_REQ_MEMPOOL_SIZE           32
-
 #endif                         /* __KERNEL__ */
 #endif                         /* _I2O_H */
 #endif                         /* __KERNEL__ */
 #endif                         /* _I2O_H */
diff --git a/include/scsi/sg_request.h b/include/scsi/sg_request.h
new file mode 100644 (file)
index 0000000..57ff525
--- /dev/null
@@ -0,0 +1,26 @@
+typedef struct scsi_request Scsi_Request;
+
+static Scsi_Request *dummy_cmdp;       /* only used for sizeof */
+
+typedef struct sg_scatter_hold { /* holding area for scsi scatter gather info */
+       unsigned short k_use_sg; /* Count of kernel scatter-gather pieces */
+       unsigned short sglist_len; /* size of malloc'd scatter-gather list ++ */
+       unsigned bufflen;       /* Size of (aggregate) data buffer */
+       unsigned b_malloc_len;  /* actual len malloc'ed in buffer */
+       void *buffer;           /* Data buffer or scatter list (k_use_sg>0) */
+       char dio_in_use;        /* 0->indirect IO (or mmap), 1->dio */
+       unsigned char cmd_opcode; /* first byte of command */
+} Sg_scatter_hold;
+
+typedef struct sg_request {    /* SG_MAX_QUEUE requests outstanding per file */
+       Scsi_Request *my_cmdp;  /* != 0  when request with lower levels */
+       struct sg_request *nextrp;      /* NULL -> tail request (slist) */
+       struct sg_fd *parentfp; /* NULL -> not in use */
+       Sg_scatter_hold data;   /* hold buffer, perhaps scatter list */
+       sg_io_hdr_t header;     /* scsi command+info, see <scsi/sg.h> */
+       unsigned char sense_b[sizeof (dummy_cmdp->sr_sense_buffer)];
+       char res_used;          /* 1 -> using reserve buffer, 0 -> not ... */
+       char orphan;            /* 1 -> drop on sight, 0 -> normal */
+       char sg_io_owned;       /* 1 -> packet belongs to SG_IO */
+       volatile char done;     /* 0->before bh, 1->before read, 2->read */
+} Sg_request;