[PATCH] V4L/DVB: (3086a) Whitespaces cleanups part 1

Clean up whitespaces at v4l/dvb files

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index a94912a..344a3c8 100644 (file)
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -132,7 +132,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
  * I2C-channel of the flexcop.
  */
 int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
  * I2C-channel of the flexcop.
  */
 int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,

-                       flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+                       flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);

 
 /* from flexcop-sram.c */
 int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
 
 /* from flexcop-sram.c */
 int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);

diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a353303..21a9045 100644 (file)
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -298,7 +298,7 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir
 }
 
 static int lgdt3303_pll_set(struct dvb_frontend* fe,
 }
 
 static int lgdt3303_pll_set(struct dvb_frontend* fe,

-                            struct dvb_frontend_parameters* params)
+                           struct dvb_frontend_parameters* params)

 {
        struct flexcop_device *fc = fe->dvb->priv;
        u8 buf[4];
 {
        struct flexcop_device *fc = fe->dvb->priv;
        u8 buf[4];


@@ -332,7 +332,7 @@ static int lgdt3303_pll_set(struct dvb_frontend* fe,
                        return -EREMOTEIO;
        }
 
                        return -EREMOTEIO;
        }
 

-        return 0;
+       return 0;

 }
 
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 }
 
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {

diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 2e39809..77977e9 100644 (file)
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -556,9 +556,9 @@ static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_par
        dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
                __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
        if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {
        dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
                __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
        if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {

-               printk(KERN_WARNING "dvb-bt8xx: %s error "
-                       "(addr %02x <- %02x, err = %i)\n",
-                       __FUNCTION__, buf[0], buf[1], err);
+               printk(KERN_WARNING "dvb-bt8xx: %s error "
+                       "(addr %02x <- %02x, err = %i)\n",
+                       __FUNCTION__, buf[0], buf[1], err);

                if (err < 0)
                        return err;
                else
                if (err < 0)
                        return err;
                else

diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c
index f20d8db..104b5d0 100644 (file)
--- a/drivers/media/dvb/dvb-usb/vp702x-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp702x-fe.c
@@ -190,7 +190,7 @@ static int vp702x_fe_get_frontend(struct dvb_frontend* fe,
 }
 
 static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
 }
 
 static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,

-                                   struct dvb_diseqc_master_cmd *m)
+                                   struct dvb_diseqc_master_cmd *m)

 {
        struct vp702x_fe_state *st = fe->demodulator_priv;
        u8 cmd[8],ibuf[10];
 {
        struct vp702x_fe_state *st = fe->demodulator_priv;
        u8 cmd[8],ibuf[10];

diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
index 2746edf..83f1de1 100644 (file)
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -58,7 +58,7 @@ static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
        struct vp7045_fe_state *state = fe->demodulator_priv;
        *ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
               (vp7045_read_reg(state->d, 0x0E) << 8) |
        struct vp7045_fe_state *state = fe->demodulator_priv;
        *ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
               (vp7045_read_reg(state->d, 0x0E) << 8) |

-               vp7045_read_reg(state->d, 0x0F);
+               vp7045_read_reg(state->d, 0x0F);

        return 0;
 }
 
        return 0;
 }
 

diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
index 72a2b54..8e0f4b3 100644 (file)
--- a/drivers/media/dvb/frontends/at76c651.c
+++ b/drivers/media/dvb/frontends/at76c651.c
@@ -361,9 +361,9 @@ static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 
 static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
 {
 
 static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
 {

-        fesettings->min_delay_ms = 50;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
+       fesettings->min_delay_ms = 50;
+       fesettings->step_size = 0;
+       fesettings->max_drift = 0;

        return 0;
 }
 
        return 0;
 }
 

diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index f6d4ee7..8ceb9a3 100644 (file)
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -69,7 +69,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
 #define dbufout(b,l,m) {\
            int i; \
            for (i = 0; i < l; i++) \
 #define dbufout(b,l,m) {\
            int i; \
            for (i = 0; i < l; i++) \

-               m("%02x ",b[i]); \
+               m("%02x ",b[i]); \

 }
 #define deb_info(args...) dprintk(0x01,args)
 #define deb_i2c(args...)  dprintk(0x02,args)
 }
 #define deb_info(args...) dprintk(0x01,args)
 #define deb_i2c(args...)  dprintk(0x02,args)


@@ -827,7 +827,7 @@ static struct dvb_frontend_ops bcm3510_ops = {
                .type = FE_ATSC,
                .frequency_min =  54000000,
                .frequency_max = 803000000,
                .type = FE_ATSC,
                .frequency_min =  54000000,
                .frequency_max = 803000000,

-                /* stepsize is just a guess */
+               /* stepsize is just a guess */

                .frequency_stepsize = 0,
                .caps =
                        FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                .frequency_stepsize = 0,
                .caps =
                        FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |

diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 0c2ed44..755f774 100644 (file)
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -355,10 +355,10 @@ static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
 
 static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {

-        fesettings->min_delay_ms = 150;
-        fesettings->step_size = 166667;
-        fesettings->max_drift = 166667*2;
-        return 0;
+       fesettings->min_delay_ms = 150;
+       fesettings->step_size = 166667;
+       fesettings->max_drift = 166667*2;
+       return 0;

 }
 
 static void cx22700_release(struct dvb_frontend* fe)
 }
 
 static void cx22700_release(struct dvb_frontend* fe)


@@ -407,7 +407,7 @@ static struct dvb_frontend_ops cx22700_ops = {
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                      FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                      FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |

-                     FE_CAN_RECOVER
+                     FE_CAN_RECOVER

        },
 
        .release = cx22700_release,
        },
 
        .release = cx22700_release,

diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index d9a8ede..5de0e6d 100644 (file)
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -2,7 +2,7 @@
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:

-        Alps TDMB7 DVB OFDM demodulator driver
+       Alps TDMB7 DVB OFDM demodulator driver

 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
          Holger Waechtler <holger@convergence.de>
 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
          Holger Waechtler <holger@convergence.de>

diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index 1f25088..5633976 100644 (file)
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -2,7 +2,7 @@
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:

-        Alps TDMB7 DVB OFDM demodulator driver
+       Alps TDMB7 DVB OFDM demodulator driver

 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
          Holger Waechtler <holger@convergence.de>
 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
          Holger Waechtler <holger@convergence.de>

diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 654d7dc..0c4db80 100644 (file)
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -55,81 +55,81 @@ static int debug;
        } while (0)
 
 static struct {u8 reg; u8 data;} cx24110_regdata[]=
        } while (0)
 
 static struct {u8 reg; u8 data;} cx24110_regdata[]=

-                      /* Comments beginning with @ denote this value should
-                         be the default */
-        {{0x09,0x01}, /* SoftResetAll */
-         {0x09,0x00}, /* release reset */
-         {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
-         {0x02,0x17}, /* middle byte " */
-         {0x03,0x29}, /* LSB         " */
-         {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
-         {0x06,0xa5}, /* @ PLL 60MHz */
-         {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
-         {0x0a,0x00}, /* @ partial chip disables, do not set */
-         {0x0b,0x01}, /* set output clock in gapped mode, start signal low
-                         active for first byte */
-         {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
-         {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
-         {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
-                         to avoid starting the BER counter. Reset the
-                         CRC test bit. Finite counting selected */
-         {0x15,0xff}, /* @ size of the limited time window for RS BER
-                         estimation. It is <value>*256 RS blocks, this
-                         gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
-         {0x16,0x00}, /* @ enable all RS output ports */
-         {0x17,0x04}, /* @ time window allowed for the RS to sync */
-         {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
-                         for automatically */
-                      /* leave the current code rate and normalization
-                         registers as they are after reset... */
-         {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
-                         only once */
-         {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
-                         estimation. It is <value>*65536 channel bits, i.e.
-                         approx. 38ms at 27.5MS/s, rate 3/4 */
-         {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
-                      /* leave front-end AGC parameters at default values */
-                      /* leave decimation AGC parameters at default values */
-         {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
-         {0x36,0xff}, /* clear all interrupt pending flags */
-         {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
-         {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
-                      /* leave the equalizer parameters on their default values */
-                      /* leave the final AGC parameters on their default values */
-         {0x41,0x00}, /* @ MSB of front-end derotator frequency */
-         {0x42,0x00}, /* @ middle bytes " */
-         {0x43,0x00}, /* @ LSB          " */
-                      /* leave the carrier tracking loop parameters on default */
-                      /* leave the bit timing loop parameters at gefault */
-         {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
-                      /* the cx24108 data sheet for symbol rates above 15MS/s */
-         {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
-         {0x61,0x95}, /* GPIO pins 1-4 have special function */
-         {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
-         {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
-         {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
-         {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
-         {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
-         {0x73,0x00}, /* @ disable several demod bypasses */
-         {0x74,0x00}, /* @  " */
-         {0x75,0x00}  /* @  " */
-                      /* the remaining registers are for SEC */
+                     /* Comments beginning with @ denote this value should
+                        be the default */
+       {{0x09,0x01}, /* SoftResetAll */
+        {0x09,0x00}, /* release reset */
+        {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+        {0x02,0x17}, /* middle byte " */
+        {0x03,0x29}, /* LSB         " */
+        {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+        {0x06,0xa5}, /* @ PLL 60MHz */
+        {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+        {0x0a,0x00}, /* @ partial chip disables, do not set */
+        {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+                        active for first byte */
+        {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+        {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+        {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+                        to avoid starting the BER counter. Reset the
+                        CRC test bit. Finite counting selected */
+        {0x15,0xff}, /* @ size of the limited time window for RS BER
+                        estimation. It is <value>*256 RS blocks, this
+                        gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+        {0x16,0x00}, /* @ enable all RS output ports */
+        {0x17,0x04}, /* @ time window allowed for the RS to sync */
+        {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+                        for automatically */
+                     /* leave the current code rate and normalization
+                        registers as they are after reset... */
+        {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+                        only once */
+        {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+                        estimation. It is <value>*65536 channel bits, i.e.
+                        approx. 38ms at 27.5MS/s, rate 3/4 */
+        {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+                     /* leave front-end AGC parameters at default values */
+                     /* leave decimation AGC parameters at default values */
+        {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+        {0x36,0xff}, /* clear all interrupt pending flags */
+        {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+        {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+                     /* leave the equalizer parameters on their default values */
+                     /* leave the final AGC parameters on their default values */
+        {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+        {0x42,0x00}, /* @ middle bytes " */
+        {0x43,0x00}, /* @ LSB          " */
+                     /* leave the carrier tracking loop parameters on default */
+                     /* leave the bit timing loop parameters at gefault */
+        {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+                     /* the cx24108 data sheet for symbol rates above 15MS/s */
+        {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+        {0x61,0x95}, /* GPIO pins 1-4 have special function */
+        {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+        {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+        {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+        {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+        {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+        {0x73,0x00}, /* @ disable several demod bypasses */
+        {0x74,0x00}, /* @  " */
+        {0x75,0x00}  /* @  " */
+                     /* the remaining registers are for SEC */

        };
 
 
 static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
 {
        };
 
 
 static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
 {

-        u8 buf [] = { reg, data };
+       u8 buf [] = { reg, data };

        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
        int err;
 
        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
        int err;
 

-        if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+       if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {

                dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
                         " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                return -EREMOTEIO;
        }
 
                dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
                         " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                return -EREMOTEIO;
        }
 

-        return 0;
+       return 0;

 }
 
 static int cx24110_readreg (struct cx24110_state* state, u8 reg)
 }
 
 static int cx24110_readreg (struct cx24110_state* state, u8 reg)


@@ -153,27 +153,27 @@ static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inver
 
        switch (inversion) {
        case INVERSION_OFF:
 
        switch (inversion) {
        case INVERSION_OFF:

-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-                /* AcqSpectrInvDis on. No idea why someone should want this */
-                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
-                /* Initial value 0 at start of acq */
-                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
-                /* current value 0 */
-                /* The cx24110 manual tells us this reg is read-only.
-                   But what the heck... set it ayways */
-                break;
+               cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+               /* AcqSpectrInvDis on. No idea why someone should want this */
+               cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
+               /* Initial value 0 at start of acq */
+               cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
+               /* current value 0 */
+               /* The cx24110 manual tells us this reg is read-only.
+                  But what the heck... set it ayways */
+               break;

        case INVERSION_ON:
        case INVERSION_ON:

-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-                /* AcqSpectrInvDis on. No idea why someone should want this */
-                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
-                /* Initial value 1 at start of acq */
-                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
-                /* current value 1 */
-                break;
+               cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+               /* AcqSpectrInvDis on. No idea why someone should want this */
+               cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
+               /* Initial value 1 at start of acq */
+               cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
+               /* current value 1 */
+               break;

        case INVERSION_AUTO:
        case INVERSION_AUTO:

-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
-                /* AcqSpectrInvDis off. Leave initial & current states as is */
-                break;
+               cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
+               /* AcqSpectrInvDis off. Leave initial & current states as is */
+               break;

        default:
                return -EINVAL;
        }
        default:
                return -EINVAL;
        }


@@ -185,18 +185,18 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
 {
 /* fixme (low): error handling */
 
 {
 /* fixme (low): error handling */
 

-        static const int rate[]={-1,1,2,3,5,7,-1};
-        static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
-        static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+       static const int rate[]={-1,1,2,3,5,7,-1};
+       static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+       static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};

 
 

-        /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
-           searches all enabled viterbi rates, and can handle non-standard
-           rates as well. */
+       /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+          searches all enabled viterbi rates, and can handle non-standard
+          rates as well. */

 
 

-        if (fec>FEC_AUTO)
-                fec=FEC_AUTO;
+       if (fec>FEC_AUTO)
+               fec=FEC_AUTO;

 
 

-        if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+       if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */

                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
                /* clear AcqVitDis bit */
                cx24110_writereg(state,0x18,0xae);
                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
                /* clear AcqVitDis bit */
                cx24110_writereg(state,0x18,0xae);


@@ -208,7 +208,7 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
                cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
                /* set the puncture registers for code rate 3/4 */
                return 0;
                cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
                /* set the puncture registers for code rate 3/4 */
                return 0;

-        } else {
+       } else {

                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
                /* set AcqVitDis bit */
                if(rate[fec]>0) {
                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
                /* set AcqVitDis bit */
                if(rate[fec]>0) {


@@ -219,10 +219,10 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
                        cx24110_writereg(state,0x1a,g1[fec]);
                        cx24110_writereg(state,0x1b,g2[fec]);
                        /* not sure if this is the right way: I always used AutoAcq mode */
                        cx24110_writereg(state,0x1a,g1[fec]);
                        cx24110_writereg(state,0x1b,g2[fec]);
                        /* not sure if this is the right way: I always used AutoAcq mode */

-           } else
+          } else

                   return -EOPNOTSUPP;
 /* fixme (low): which is the correct return code? */
                   return -EOPNOTSUPP;
 /* fixme (low): which is the correct return code? */

-        };
+       };

        return 0;
 }
 
        return 0;
 }
 


@@ -245,72 +245,72 @@ static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state)
 static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
 {
 /* fixme (low): add error handling */
 static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
 {
 /* fixme (low): add error handling */

-        u32 ratio;
-        u32 tmp, fclk, BDRI;
+       u32 ratio;
+       u32 tmp, fclk, BDRI;

 
 

-        static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
-        int i;
+       static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+       int i;

 
 dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);
 
 dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);

-        if (srate>90999000UL/2)
-                srate=90999000UL/2;
-        if (srate<500000)
-                srate=500000;
+       if (srate>90999000UL/2)
+               srate=90999000UL/2;
+       if (srate<500000)
+               srate=500000;

 
 

-        for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+       for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)

                ;
                ;

-        /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
-           and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
-           R06[3:0] PLLphaseDetGain */
-        tmp=cx24110_readreg(state,0x07)&0xfc;
-        if(srate<90999000UL/4) { /* sample rate 45MHz*/
+       /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+          and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+          R06[3:0] PLLphaseDetGain */
+       tmp=cx24110_readreg(state,0x07)&0xfc;
+       if(srate<90999000UL/4) { /* sample rate 45MHz*/

                cx24110_writereg(state,0x07,tmp);
                cx24110_writereg(state,0x06,0x78);
                fclk=90999000UL/2;
                cx24110_writereg(state,0x07,tmp);
                cx24110_writereg(state,0x06,0x78);
                fclk=90999000UL/2;

-        } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+       } else if(srate<60666000UL/2) { /* sample rate 60MHz */

                cx24110_writereg(state,0x07,tmp|0x1);
                cx24110_writereg(state,0x06,0xa5);
                fclk=60666000UL;
                cx24110_writereg(state,0x07,tmp|0x1);
                cx24110_writereg(state,0x06,0xa5);
                fclk=60666000UL;

-        } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+       } else if(srate<80888000UL/2) { /* sample rate 80MHz */

                cx24110_writereg(state,0x07,tmp|0x2);
                cx24110_writereg(state,0x06,0x87);
                fclk=80888000UL;
                cx24110_writereg(state,0x07,tmp|0x2);
                cx24110_writereg(state,0x06,0x87);
                fclk=80888000UL;

-        } else { /* sample rate 90MHz */
+       } else { /* sample rate 90MHz */

                cx24110_writereg(state,0x07,tmp|0x3);
                cx24110_writereg(state,0x06,0x78);
                fclk=90999000UL;
                cx24110_writereg(state,0x07,tmp|0x3);
                cx24110_writereg(state,0x06,0x78);
                fclk=90999000UL;

-        };
-        dprintk("cx24110 debug: fclk %d Hz\n",fclk);
-        /* we need to divide two integers with approx. 27 bits in 32 bit
-           arithmetic giving a 25 bit result */
-        /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
-           also the most complex divisor. Hence, the dividend has,
-           assuming 32bit unsigned arithmetic, 6 clear bits on top, the
-           divisor 2 unused bits at the bottom. Also, the quotient is
-           always less than 1/2. Borrowed from VES1893.c, of course */
+       };
+       dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+       /* we need to divide two integers with approx. 27 bits in 32 bit
+          arithmetic giving a 25 bit result */
+       /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+          also the most complex divisor. Hence, the dividend has,
+          assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+          divisor 2 unused bits at the bottom. Also, the quotient is
+          always less than 1/2. Borrowed from VES1893.c, of course */

 
 

-        tmp=srate<<6;
-        BDRI=fclk>>2;
-        ratio=(tmp/BDRI);
+       tmp=srate<<6;
+       BDRI=fclk>>2;
+       ratio=(tmp/BDRI);

 
 

-        tmp=(tmp%BDRI)<<8;
-        ratio=(ratio<<8)+(tmp/BDRI);
+       tmp=(tmp%BDRI)<<8;
+       ratio=(ratio<<8)+(tmp/BDRI);

 
 

-        tmp=(tmp%BDRI)<<8;
-        ratio=(ratio<<8)+(tmp/BDRI);
+       tmp=(tmp%BDRI)<<8;
+       ratio=(ratio<<8)+(tmp/BDRI);

 
 

-        tmp=(tmp%BDRI)<<1;
-        ratio=(ratio<<1)+(tmp/BDRI);
+       tmp=(tmp%BDRI)<<1;
+       ratio=(ratio<<1)+(tmp/BDRI);

 
 

-        dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
-        dprintk("fclk = %d\n", fclk);
-        dprintk("ratio= %08x\n", ratio);
+       dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+       dprintk("fclk = %d\n", fclk);
+       dprintk("ratio= %08x\n", ratio);

 
 

-        cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
-        cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
-        cx24110_writereg(state, 0x3, (ratio)&0xff);
+       cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
+       cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
+       cx24110_writereg(state, 0x3, (ratio)&0xff);

 
 

-        return 0;
+       return 0;

 
 }
 
 
 }
 


@@ -324,48 +324,48 @@ int cx24110_pll_write (struct dvb_frontend* fe, u32 data)
 
        dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
 
 
        dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
 

-        cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
-        cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
+       cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
+       cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */

 
 

-        /* if the auto tuner writer is still busy, clear it out */
-        while (cx24110_readreg(state,0x6d)&0x80)
+       /* if the auto tuner writer is still busy, clear it out */
+       while (cx24110_readreg(state,0x6d)&0x80)

                cx24110_writereg(state,0x72,0);
 
                cx24110_writereg(state,0x72,0);
 

-        /* write the topmost 8 bits */
-        cx24110_writereg(state,0x72,(data>>24)&0xff);
+       /* write the topmost 8 bits */
+       cx24110_writereg(state,0x72,(data>>24)&0xff);

 
 

-        /* wait for the send to be completed */
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+       /* wait for the send to be completed */
+       while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)

                ;
 
                ;
 

-        /* send another 8 bytes */
-        cx24110_writereg(state,0x72,(data>>16)&0xff);
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+       /* send another 8 bytes */
+       cx24110_writereg(state,0x72,(data>>16)&0xff);
+       while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)

                ;
 
                ;
 

-        /* and the topmost 5 bits of this byte */
-        cx24110_writereg(state,0x72,(data>>8)&0xff);
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+       /* and the topmost 5 bits of this byte */
+       cx24110_writereg(state,0x72,(data>>8)&0xff);
+       while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)

                ;
 
                ;
 

-        /* now strobe the enable line once */
-        cx24110_writereg(state,0x6d,0x32);
-        cx24110_writereg(state,0x6d,0x30);
+       /* now strobe the enable line once */
+       cx24110_writereg(state,0x6d,0x32);
+       cx24110_writereg(state,0x6d,0x30);

 
 

-        return 0;
+       return 0;

 }
 
 static int cx24110_initfe(struct dvb_frontend* fe)
 {
        struct cx24110_state *state = fe->demodulator_priv;
 /* fixme (low): error handling */
 }
 
 static int cx24110_initfe(struct dvb_frontend* fe)
 {
        struct cx24110_state *state = fe->demodulator_priv;
 /* fixme (low): error handling */

-        int i;
+       int i;

 
        dprintk("%s: init chip\n", __FUNCTION__);
 
 
        dprintk("%s: init chip\n", __FUNCTION__);
 

-        for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+       for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {

                cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
                cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);

-        };
+       };

 
        if (state->config->pll_init) state->config->pll_init(fe);
 
 
        if (state->config->pll_init) state->config->pll_init(fe);
 

diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 19b4bf7..1c7c912 100644 (file)
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -2,7 +2,7 @@
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH

-                       Marko Kohtala <marko.kohtala@luukku.com>
+                      Marko Kohtala <marko.kohtala@luukku.com>

 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by


@@ -433,7 +433,7 @@ static int l64781_init(struct dvb_frontend* fe)
 {
        struct l64781_state* state = fe->demodulator_priv;
 
 {
        struct l64781_state* state = fe->demodulator_priv;
 

-        reset_and_configure (state);
+       reset_and_configure (state);

 
        /* Power up */
        l64781_writereg (state, 0x3e, 0xa5);
 
        /* Power up */
        l64781_writereg (state, 0x3e, 0xa5);


@@ -456,9 +456,9 @@ static int l64781_init(struct dvb_frontend* fe)
        l64781_writereg (state, 0x0d, 0x8c);
 
        /* With ppm=8000, it seems the DTR_SENSITIVITY will result in
        l64781_writereg (state, 0x0d, 0x8c);
 
        /* With ppm=8000, it seems the DTR_SENSITIVITY will result in

-           value of 2 with all possible bandwidths and guard
-           intervals, which is the initial value anyway. */
-        /*l64781_writereg (state, 0x19, 0x92);*/
+          value of 2 with all possible bandwidths and guard
+          intervals, which is the initial value anyway. */
+       /*l64781_writereg (state, 0x19, 0x92);*/

 
        /* Everything is two's complement, soft bit and CSI_OUT too */
        l64781_writereg (state, 0x1e, 0x09);
 
        /* Everything is two's complement, soft bit and CSI_OUT too */
        l64781_writereg (state, 0x1e, 0x09);


@@ -477,10 +477,10 @@ static int l64781_init(struct dvb_frontend* fe)
 static int l64781_get_tune_settings(struct dvb_frontend* fe,
                                    struct dvb_frontend_tune_settings* fesettings)
 {
 static int l64781_get_tune_settings(struct dvb_frontend* fe,
                                    struct dvb_frontend_tune_settings* fesettings)
 {

-        fesettings->min_delay_ms = 4000;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
-        return 0;
+       fesettings->min_delay_ms = 4000;
+       fesettings->step_size = 0;
+       fesettings->max_drift = 0;
+       return 0;

 }
 
 static void l64781_release(struct dvb_frontend* fe)
 }
 
 static void l64781_release(struct dvb_frontend* fe)


@@ -522,7 +522,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
        /* The chip always responds to reads */
        if (i2c_transfer(state->i2c, msg, 2) != 2) {
 
        /* The chip always responds to reads */
        if (i2c_transfer(state->i2c, msg, 2) != 2) {

-               dprintk("No response to read on I2C bus\n");
+               dprintk("No response to read on I2C bus\n");

                goto error;
        }
 
                goto error;
        }
 


@@ -531,7 +531,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
        /* Reading the POWER_DOWN register always returns 0 */
        if (reg0x3e != 0) {
 
        /* Reading the POWER_DOWN register always returns 0 */
        if (reg0x3e != 0) {

-               dprintk("Device doesn't look like L64781\n");
+               dprintk("Device doesn't look like L64781\n");

                goto error;
        }
 
                goto error;
        }
 


@@ -540,7 +540,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
        /* Responds to all reads with 0 */
        if (l64781_readreg(state, 0x1a) != 0) {
 
        /* Responds to all reads with 0 */
        if (l64781_readreg(state, 0x1a) != 0) {

-               dprintk("Read 1 returned unexpcted value\n");
+               dprintk("Read 1 returned unexpcted value\n");

                goto error;
        }
 
                goto error;
        }
 


@@ -549,7 +549,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
        /* Responds with register default value */
        if (l64781_readreg(state, 0x1a) != 0xa1) {
 
        /* Responds with register default value */
        if (l64781_readreg(state, 0x1a) != 0xa1) {

-               dprintk("Read 2 returned unexpcted value\n");
+               dprintk("Read 2 returned unexpcted value\n");

                goto error;
        }
 
                goto error;
        }
 

diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
index 7e30fb0..947f65f 100644 (file)
--- a/drivers/media/dvb/frontends/l64781.h
+++ b/drivers/media/dvb/frontends/l64781.h
@@ -2,7 +2,7 @@
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH

-                       Marko Kohtala <marko.kohtala@luukku.com>
+                      Marko Kohtala <marko.kohtala@luukku.com>

 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by

diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 6a33f5a..cb53018 100644 (file)
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -301,10 +301,10 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
        static u8 lgdt3303_8vsb_44_data[] = {
                0x04, 0x00,
                0x0d, 0x40,
        static u8 lgdt3303_8vsb_44_data[] = {
                0x04, 0x00,
                0x0d, 0x40,

-        0x0e, 0x87,
-        0x0f, 0x8e,
-        0x10, 0x01,
-        0x47, 0x8b };
+       0x0e, 0x87,
+       0x0f, 0x8e,
+       0x10, 0x01,
+       0x47, 0x8b };

 
        /*
         * Array of byte pairs <address, value>
 
        /*
         * Array of byte pairs <address, value>

diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 9c67f40..8d67228 100644 (file)
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -554,7 +554,7 @@ static int mt312_set_frontend(struct dvb_frontend* fe,
        if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
                return ret;
 
        if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
                return ret;
 

-        mt312_reset(state, 0);
+       mt312_reset(state, 0);

 
        return 0;
 }
 
        return 0;
 }


@@ -695,7 +695,7 @@ static struct dvb_frontend_ops vp310_mt312_ops = {
                    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
                    FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
                    FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
                    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
                    FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
                    FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |

-                   FE_CAN_RECOVER
+                   FE_CAN_RECOVER

        },
 
        .release = mt312_release,
        },
 
        .release = mt312_release,

diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 30786b1..52c4160 100644 (file)
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -527,7 +527,7 @@ static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
        else
                snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
 
        else
                snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
 

-        /* the value reported back from the frontend will be FFFF=32db 0000=0db */
+       /* the value reported back from the frontend will be FFFF=32db 0000=0db */

 
        *snr = snrdb * (0xFFFF/32000);
 
 
        *snr = snrdb * (0xFFFF/32000);
 


@@ -646,7 +646,7 @@ struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
        memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
        state->initialised = 0;
 
        memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
        state->initialised = 0;
 

-        /* Check the first 5 registers to ensure this a revision we can handle */
+       /* Check the first 5 registers to ensure this a revision we can handle */

 
        i2c_readbytes(state, 0x00, buf, 5);
        if (buf[0] != 0x04) goto error;         /* device id */
 
        i2c_readbytes(state, 0x00, buf, 5);
        if (buf[0] != 0x04) goto error;         /* device id */


@@ -672,7 +672,7 @@ static struct dvb_frontend_ops nxt2002_ops = {
                .type = FE_ATSC,
                .frequency_min =  54000000,
                .frequency_max = 860000000,
                .type = FE_ATSC,
                .frequency_min =  54000000,
                .frequency_max = 860000000,

-                /* stepsize is just a guess */
+               /* stepsize is just a guess */

                .frequency_stepsize = 166666,
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                .frequency_stepsize = 166666,
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |

diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 84b6288..aeafef4 100644 (file)
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -339,7 +339,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
        switch (state->demod_chip) {
                case NXT2004:
                        if (i2c_writebytes(state, state->config->pll_address, data, 4))
        switch (state->demod_chip) {
                case NXT2004:
                        if (i2c_writebytes(state, state->config->pll_address, data, 4))

-                               printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+                               printk(KERN_WARNING "nxt200x: error writing to tuner\n");

                        /* wait until we have a lock */
                        while (count < 20) {
                                i2c_readbytes(state, state->config->pll_address, &buf, 1);
                        /* wait until we have a lock */
                        while (count < 20) {
                                i2c_readbytes(state, state->config->pll_address, &buf, 1);


@@ -497,7 +497,7 @@ static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware
 
        /* calculate firmware CRC */
        for (position = 0; position < fw->size; position++) {
 
        /* calculate firmware CRC */
        for (position = 0; position < fw->size; position++) {

-               crc = nxt200x_crc(crc, fw->data[position]);
+               crc = nxt200x_crc(crc, fw->data[position]);

        }
 
        buf[0] = rambase >> 8;
        }
 
        buf[0] = rambase >> 8;

diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index 88a57b7..a458a3b 100644 (file)
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -574,11 +574,11 @@ static struct dvb_frontend_ops nxt6000_ops = {
                .symbol_rate_max = 9360000,     /* FIXME */
                .symbol_rate_tolerance = 4000,
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                .symbol_rate_max = 9360000,     /* FIXME */
                .symbol_rate_tolerance = 4000,
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |

-                       FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-                       FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-                       FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-                       FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-                       FE_CAN_HIERARCHY_AUTO,
+                       FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+                       FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+                       FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+                       FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+                       FE_CAN_HIERARCHY_AUTO,

        },
 
        .release = nxt6000_release,
        },
 
        .release = nxt6000_release,

diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 78bded8..80e0f28 100644 (file)
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -503,7 +503,7 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
        rcvr_stat = rec_buf[1];
        usK = (rcvr_stat & 0x10) ? 3 : 0;
 
        rcvr_stat = rec_buf[1];
        usK = (rcvr_stat & 0x10) ? 3 : 0;
 

-        /* The value reported back from the frontend will be FFFF=100% 0000=0% */
+       /* The value reported back from the frontend will be FFFF=100% 0000=0% */

        signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
        if (signal_strength > 0xffff)
                *strength = 0xffff;
        signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
        if (signal_strength > 0xffff)
                *strength = 0xffff;

diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index f265418..1871509 100644 (file)
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -494,7 +494,7 @@ static int s5h1420_getfreqoffset(struct s5h1420_state* state)
 }
 
 static void s5h1420_setfec_inversion(struct s5h1420_state* state,
 }
 
 static void s5h1420_setfec_inversion(struct s5h1420_state* state,

-                                    struct dvb_frontend_parameters *p)
+                                    struct dvb_frontend_parameters *p)

 {
        u8 inversion = 0;
 
 {
        u8 inversion = 0;
 


@@ -521,8 +521,8 @@ static void s5h1420_setfec_inversion(struct s5h1420_state* state,
 
                case FEC_3_4:
                        s5h1420_writereg(state, 0x30, 0x04);
 
                case FEC_3_4:
                        s5h1420_writereg(state, 0x30, 0x04);

-                        s5h1420_writereg(state, 0x31, 0x12 | inversion);
-                        break;
+                       s5h1420_writereg(state, 0x31, 0x12 | inversion);
+                       break;

 
                case FEC_5_6:
                        s5h1420_writereg(state, 0x30, 0x08);
 
                case FEC_5_6:
                        s5h1420_writereg(state, 0x30, 0x08);

diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index 872028d..73296f1 100644 (file)
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -39,6 +39,6 @@ struct s5h1420_config
 };
 
 extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
 };
 
 extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,

-             struct i2c_adapter* i2c);
+            struct i2c_adapter* i2c);

 
 #endif // S5H1420_H
 
 #endif // S5H1420_H

diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 1c6b2e9..fc06cd6 100644 (file)
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -67,16 +67,16 @@ static int debug;
 
 static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
 {
 
 static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
 {

-        u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+       u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };

        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
        int err;
 
        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
        int err;
 

-        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+       if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {

                dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                return -EREMOTEIO;
        }
 
                dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                return -EREMOTEIO;
        }
 

-        return 0;
+       return 0;

 }
 
 static int sp8870_readreg (struct sp8870_state* state, u16 reg)
 }
 
 static int sp8870_readreg (struct sp8870_state* state, u16 reg)


@@ -305,7 +305,7 @@ static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
 static int sp8870_init (struct dvb_frontend* fe)
 {
        struct sp8870_state* state = fe->demodulator_priv;
 static int sp8870_init (struct dvb_frontend* fe)
 {
        struct sp8870_state* state = fe->demodulator_priv;

-        const struct firmware *fw = NULL;
+       const struct firmware *fw = NULL;

 
        sp8870_wake_up(state);
        if (state->initialised) return 0;
 
        sp8870_wake_up(state);
        if (state->initialised) return 0;


@@ -534,10 +534,10 @@ static int sp8870_sleep(struct dvb_frontend* fe)
 
 static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
 
 static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {

-        fesettings->min_delay_ms = 350;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
-        return 0;
+       fesettings->min_delay_ms = 350;
+       fesettings->step_size = 0;
+       fesettings->max_drift = 0;
+       return 0;

 }
 
 static void sp8870_release(struct dvb_frontend* fe)
 }
 
 static void sp8870_release(struct dvb_frontend* fe)

diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 73384e7..e3b6657 100644 (file)
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -80,7 +80,7 @@ static int sp887x_readreg (struct sp887x_state* state, u16 reg)
        u8 b1 [2];
        int ret;
        struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
        u8 b1 [2];
        int ret;
        struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },

-                        { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
+                        { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};

 
        if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
                printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
 
        if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
                printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);


@@ -498,7 +498,7 @@ static int sp887x_sleep(struct dvb_frontend* fe)
 static int sp887x_init(struct dvb_frontend* fe)
 {
        struct sp887x_state* state = fe->demodulator_priv;
 static int sp887x_init(struct dvb_frontend* fe)
 {
        struct sp887x_state* state = fe->demodulator_priv;

-        const struct firmware *fw = NULL;
+       const struct firmware *fw = NULL;

        int ret;
 
        if (!state->initialised) {
        int ret;
 
        if (!state->initialised) {


@@ -528,10 +528,10 @@ static int sp887x_init(struct dvb_frontend* fe)
 
 static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
 
 static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {

-        fesettings->min_delay_ms = 350;
-        fesettings->step_size = 166666*2;
-        fesettings->max_drift = (166666*2)+1;
-        return 0;
+       fesettings->min_delay_ms = 350;
+       fesettings->step_size = 166666*2;
+       fesettings->max_drift = (166666*2)+1;
+       return 0;

 }
 
 static void sp887x_release(struct dvb_frontend* fe)
 }
 
 static void sp887x_release(struct dvb_frontend* fe)


@@ -581,7 +581,7 @@ static struct dvb_frontend_ops sp887x_ops = {
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                        FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
                .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                        FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |

-                       FE_CAN_RECOVER
+                       FE_CAN_RECOVER

        },
 
        .release = sp887x_release,
        },
 
        .release = sp887x_release,

diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 29c4866..177d71d 100644 (file)
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -95,7 +95,7 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data)
 
 int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
 {
 
 int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        return stv0299_writeregI(state, reg, data);
 }
 
        return stv0299_writeregI(state, reg, data);
 }


@@ -220,7 +220,7 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout)
 
 static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
 {
 
 static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        u64 big = srate;
        u32 ratio;
 
        u64 big = srate;
        u32 ratio;
 


@@ -271,7 +271,7 @@ static int stv0299_get_symbolrate (struct stv0299_state* state)
 static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
                                    struct dvb_diseqc_master_cmd *m)
 {
 static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
                                    struct dvb_diseqc_master_cmd *m)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        u8 val;
        int i;
 
        u8 val;
        int i;
 


@@ -301,7 +301,7 @@ static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
 
 static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {
 
 static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        u8 val;
 
        dprintk ("%s\n", __FUNCTION__);
        u8 val;
 
        dprintk ("%s\n", __FUNCTION__);


@@ -328,7 +328,7 @@ static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t
 
 static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
 
 static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        u8 val;
 
        if (stv0299_wait_diseqc_idle (state, 100) < 0)
        u8 val;
 
        if (stv0299_wait_diseqc_idle (state, 100) < 0)


@@ -350,7 +350,7 @@ static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 
 static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
 
 static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        u8 reg0x08;
        u8 reg0x0c;
 
        u8 reg0x08;
        u8 reg0x0c;
 


@@ -442,7 +442,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
 
 static int stv0299_init (struct dvb_frontend* fe)
 {
 
 static int stv0299_init (struct dvb_frontend* fe)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        int i;
 
        dprintk("stv0299: init chip\n");
        int i;
 
        dprintk("stv0299: init chip\n");


@@ -461,7 +461,7 @@ static int stv0299_init (struct dvb_frontend* fe)
 
 static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
 
 static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        u8 signal = 0xff - stv0299_readreg (state, 0x18);
        u8 sync = stv0299_readreg (state, 0x1b);
 
        u8 signal = 0xff - stv0299_readreg (state, 0x18);
        u8 sync = stv0299_readreg (state, 0x1b);


@@ -489,7 +489,7 @@ static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
 static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 {
 
 static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        if (state->errmode != STATUS_BER) return 0;
        *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
 
        if (state->errmode != STATUS_BER) return 0;
        *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);


@@ -499,7 +499,7 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 
 static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
 
 static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        s32 signal =  0xffff - ((stv0299_readreg (state, 0x18) << 8)
                               | stv0299_readreg (state, 0x19));
 
        s32 signal =  0xffff - ((stv0299_readreg (state, 0x18) << 8)
                               | stv0299_readreg (state, 0x19));


@@ -516,7 +516,7 @@ static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 
 static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 {
 
 static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
                           | stv0299_readreg (state, 0x25));
 
        s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
                           | stv0299_readreg (state, 0x25));


@@ -528,7 +528,7 @@ static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 
 static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
 
 static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
        else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
 
        if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
        else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);


@@ -538,7 +538,7 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 
 static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
 
 static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        int invval = 0;
 
        dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
        int invval = 0;
 
        dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);


@@ -571,7 +571,7 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
 
 static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

        s32 derot_freq;
        int invval;
 
        s32 derot_freq;
        int invval;
 


@@ -596,7 +596,7 @@ static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int stv0299_sleep(struct dvb_frontend* fe)
 {
 
 static int stv0299_sleep(struct dvb_frontend* fe)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        stv0299_writeregI(state, 0x02, 0x80);
        state->initialised = 0;
 
        stv0299_writeregI(state, 0x02, 0x80);
        state->initialised = 0;


@@ -606,7 +606,7 @@ static int stv0299_sleep(struct dvb_frontend* fe)
 
 static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
 
 static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {

-        struct stv0299_state* state = fe->demodulator_priv;
+       struct stv0299_state* state = fe->demodulator_priv;

 
        fesettings->min_delay_ms = state->config->min_delay_ms;
        if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
 
        fesettings->min_delay_ms = state->config->min_delay_ms;
        if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {


@@ -658,7 +658,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 
        /* create dvb_frontend */
        state->frontend.ops = &state->ops;
 
        /* create dvb_frontend */
        state->frontend.ops = &state->ops;

-        state->frontend.demodulator_priv = state;
+       state->frontend.demodulator_priv = state;

        return &state->frontend;
 
 error:
        return &state->frontend;
 
 error:


@@ -714,7 +714,7 @@ MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
 
 MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "

-              "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
+             "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");

 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(stv0299_writereg);
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(stv0299_writereg);

diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index eaf130e..425cd19 100644 (file)
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -1,10 +1,10 @@
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module

-               used on the the Siemens DVB-C cards
+              used on the the Siemens DVB-C cards

 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>

-                   Support for TDA10021
+                  Support for TDA10021

 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by


@@ -76,9 +76,9 @@ static u8 tda10021_inittab[0x40]=
 
 static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
 {
 
 static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
 {

-        u8 buf[] = { reg, data };
+       u8 buf[] = { reg, data };

        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };

-        int ret;
+       int ret;

 
        ret = i2c_transfer (state->i2c, &msg, 1);
        if (ret != 1)
 
        ret = i2c_transfer (state->i2c, &msg, 1);
        if (ret != 1)


@@ -95,7 +95,7 @@ static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
        u8 b0 [] = { reg };
        u8 b1 [] = { 0 };
        struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
        u8 b0 [] = { reg };
        u8 b1 [] = { 0 };
        struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },

-                                 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+                                 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };

        int ret;
 
        ret = i2c_transfer (state->i2c, msg, 2);
        int ret;
 
        ret = i2c_transfer (state->i2c, msg, 2);

diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h
index 7d6a51c..53be939 100644 (file)
--- a/drivers/media/dvb/frontends/tda10021.h
+++ b/drivers/media/dvb/frontends/tda10021.h
@@ -1,10 +1,10 @@
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module

-               used on the the Siemens DVB-C cards
+              used on the the Siemens DVB-C cards

 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>

-                   Support for TDA10021
+                  Support for TDA10021

 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by

diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 7968743..dd02aff 100644 (file)
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -475,7 +475,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
                ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
                if (ret) {
                        printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
                ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
                if (ret) {
                        printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");

-                       return ret;
+                       return ret;

                }
                tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
                ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
                }
                tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
                ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);

diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index c05cf18..91baa9c 100644 (file)
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -66,13 +66,13 @@ static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data)
        u8 buf [] = { reg, data };
        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 
        u8 buf [] = { reg, data };
        struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 

-        ret = i2c_transfer(state->i2c, &msg, 1);
+       ret = i2c_transfer(state->i2c, &msg, 1);

 
 

-        if (ret != 1)
-                dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
+       if (ret != 1)
+               dprintk ("%s: writereg error (reg %02x, ret == %i)\n",

                        __FUNCTION__, reg, ret);
 
                        __FUNCTION__, reg, ret);
 

-        return (ret != 1) ? -1 : 0;
+       return (ret != 1) ? -1 : 0;

 }
 
 static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)
 }
 
 static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)


@@ -87,7 +87,7 @@ static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len
                dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
                        __FUNCTION__, reg1, ret);
 
                dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
                        __FUNCTION__, reg1, ret);
 

-        return ret == 2 ? 0 : -1;
+       return ret == 2 ? 0 : -1;

 }
 
 static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)
 }
 
 static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)


@@ -132,14 +132,14 @@ static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state)
 
 static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
 {
 
 static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
 {

-        u32 ratio;
+       u32 ratio;

        u32 tmp;
        u8 filter;
 
        if (srate > 32000000)
        u32 tmp;
        u8 filter;
 
        if (srate > 32000000)

-                srate = 32000000;
-        if (srate < 500000)
-                srate = 500000;
+               srate = 32000000;
+       if (srate < 500000)
+               srate = 500000;

 
        filter = 0;
        if (srate < 24000000)
 
        filter = 0;
        if (srate < 24000000)


@@ -174,7 +174,7 @@ static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout)
        unsigned long start = jiffies;
 
        while (jiffies - start < timeout &&
        unsigned long start = jiffies;
 
        while (jiffies - start < timeout &&

-               !(tda8083_readreg(state, 0x02) & 0x80))
+              !(tda8083_readreg(state, 0x02) & 0x80))

        {
                msleep(50);
        };
        {
                msleep(50);
        };

diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 87ea527..992be0b 100644 (file)
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -217,10 +217,10 @@ static int arm_thread(void *data)
 
        dprintk(4, "%p\n",av7110);
 
 
        dprintk(4, "%p\n",av7110);
 

-        lock_kernel();
-        daemonize("arm_mon");
-        sigfillset(&current->blocked);
-        unlock_kernel();
+       lock_kernel();
+       daemonize("arm_mon");
+       sigfillset(&current->blocked);
+       unlock_kernel();

 
        av7110->arm_thread = current;
 
 
        av7110->arm_thread = current;
 


@@ -1535,7 +1535,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 

-        // NOTE: since we're using a prescaler of 2, we set the
+       // NOTE: since we're using a prescaler of 2, we set the

        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)
        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)


@@ -1811,7 +1811,7 @@ static struct tda8083_config grundig_29504_451_config = {
 static int philips_cd1516_pll_set(struct dvb_frontend* fe,
                                  struct dvb_frontend_parameters* params)
 {
 static int philips_cd1516_pll_set(struct dvb_frontend* fe,
                                  struct dvb_frontend_parameters* params)
 {

-        struct av7110* av7110 = fe->dvb->priv;
+       struct av7110* av7110 = fe->dvb->priv;

        u32 div;
        u32 f = params->frequency;
        u8 data[4];
        u32 div;
        u32 f = params->frequency;
        u8 data[4];


@@ -2202,7 +2202,7 @@ static u8 read_pwm(struct av7110* av7110)
        struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 
        struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 

-        if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+       if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))

                pwm = 0x48;
 
        return pwm;
                pwm = 0x48;
 
        return pwm;


@@ -2245,7 +2245,7 @@ static int frontend_init(struct av7110 *av7110)
                        }
 
                        // Try the grundig 29504-451
                        }
 
                        // Try the grundig 29504-451

-                        av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
+                       av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);

                        if (av7110->fe) {
                                av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
                                av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
                        if (av7110->fe) {
                                av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
                                av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;


@@ -2271,12 +2271,12 @@ static int frontend_init(struct av7110 *av7110)
                case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
 
                        // ALPS TDLB7
                case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
 
                        // ALPS TDLB7

-                        av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
+                       av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);

                        break;
 
                case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
 
                        break;
 
                case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
 

-                        av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
+                       av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));

                        break;
 
                case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
                        break;
 
                case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */


@@ -2421,9 +2421,9 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d
 
        dprintk(4, "dev: %p\n", dev);
 
 
        dprintk(4, "dev: %p\n", dev);
 

-        /* Set RPS_IRQ to 1 to track rps1 activity.
-         * Enabling this won't send any interrupt to PC CPU.
-         */
+       /* Set RPS_IRQ to 1 to track rps1 activity.
+        * Enabling this won't send any interrupt to PC CPU.
+        */

 #define RPS_IRQ 0
 
        if (budgetpatch == 1) {
 #define RPS_IRQ 0
 
        if (budgetpatch == 1) {

diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 7442f56..87106e8 100644 (file)
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -1203,15 +1203,15 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
 
 int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
 {
 
 int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
 {

-        switch (cap->cmd) {
-        case OSD_CAP_MEMSIZE:
-                if (FW_4M_SDRAM(av7110->arm_app))
-                        cap->val = 1000000;
-                else
-                        cap->val = 92000;
-                return 0;
-        default:
-                return -EINVAL;
-        }
+       switch (cap->cmd) {
+       case OSD_CAP_MEMSIZE:
+               if (FW_4M_SDRAM(av7110->arm_app))
+                       cap->val = 1000000;
+               else
+                       cap->val = 92000;
+               return 0;
+       default:
+               return -EINVAL;
+       }

 }
 #endif /* CONFIG_DVB_AV7110_OSD */
 }
 #endif /* CONFIG_DVB_AV7110_OSD */

diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 6af74f7..b5aea41 100644 (file)
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -120,8 +120,8 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 
 static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 {
 
 static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 {

-        u8 buf [] = { reg, data };
-        struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
+       u8 buf [] = { reg, data };
+       struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };

 
        if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
                return -1;
 
        if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
                return -1;

diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 0498a05..017fcbc 100644 (file)
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -87,7 +87,7 @@ static int start_ts_capture(struct budget *budget)
         *      Pitch: 188, NumBytes3: 188, NumLines3: 1024
         */
 
         *      Pitch: 188, NumBytes3: 188, NumLines3: 1024
         */
 

-        switch(budget->card->type) {
+       switch(budget->card->type) {

        case BUDGET_FS_ACTIVY:
                saa7146_write(dev, DD1_INIT, 0x04000000);
                saa7146_write(dev, MC2, (MASK_09 | MASK_25));
        case BUDGET_FS_ACTIVY:
                saa7146_write(dev, DD1_INIT, 0x04000000);
                saa7146_write(dev, MC2, (MASK_09 | MASK_25));

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 755df81..fc416cf 100644 (file)
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -45,11 +45,11 @@ MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
 //MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
 
 static struct pci_device_id pci_tbl[] = {
 //MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
 
 static struct pci_device_id pci_tbl[] = {

-        MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+       MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),

 //        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
 //        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),

-        {
-                .vendor    = 0,
-        }
+       {
+               .vendor    = 0,
+       }

 };
 
 /* those lines are for budget-patch to be tried
 };
 
 /* those lines are for budget-patch to be tried


@@ -165,57 +165,57 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m
 
 static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
 {
 
 static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
 {

-        int i;
-
-        dprintk(2, "budget: %p\n", budget);
-
-        for (i = 2; i < length; i++)
-        {
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
-                  msleep(5);
-        }
-        if (length)
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
-        else
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
-        msleep(5);
-        ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
-        msleep(5);
-        return 0;
+       int i;
+
+       dprintk(2, "budget: %p\n", budget);
+
+       for (i = 2; i < length; i++)
+       {
+                 ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+                 msleep(5);
+       }
+       if (length)
+                 ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+       else
+                 ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+       msleep(5);
+       ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+       msleep(5);
+       return 0;

 }
 
 static void av7110_set22k(struct budget_patch *budget, int state)
 {
 }
 
 static void av7110_set22k(struct budget_patch *budget, int state)
 {

-        u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+       u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};

 
 

-        dprintk(2, "budget: %p\n", budget);
-        budget_av7110_send_fw_cmd(budget, buf, 2);
+       dprintk(2, "budget: %p\n", budget);
+       budget_av7110_send_fw_cmd(budget, buf, 2);

 }
 
 static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
 {
 }
 
 static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
 {

-        int i;
-        u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
-                16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+       int i;
+       u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+               16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };

 
 

-        dprintk(2, "budget: %p\n", budget);
+       dprintk(2, "budget: %p\n", budget);

 
 

-        if (len>10)
-                len=10;
+       if (len>10)
+               len=10;

 
 

-        buf[1] = len+2;
-        buf[2] = len;
+       buf[1] = len+2;
+       buf[2] = len;

 
 

-        if (burst != -1)
-                buf[3]=burst ? 0x01 : 0x00;
-        else
-                buf[3]=0xffff;
+       if (burst != -1)
+               buf[3]=burst ? 0x01 : 0x00;
+       else
+               buf[3]=0xffff;

 
 

-        for (i=0; i<len; i++)
-                buf[i+4]=msg[i];
+       for (i=0; i<len; i++)
+               buf[i+4]=msg[i];

 
 

-        budget_av7110_send_fw_cmd(budget, buf, 18);
-        return 0;
+       budget_av7110_send_fw_cmd(budget, buf, 18);
+       return 0;

 }
 
 static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 }
 
 static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)


@@ -276,7 +276,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 

-        // NOTE: since we're using a prescaler of 2, we set the
+       // NOTE: since we're using a prescaler of 2, we set the

        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;


@@ -294,7 +294,7 @@ static u8 alps_bsru6_inittab[] = {
        0x01, 0x15,
        0x02, 0x00,
        0x03, 0x00,
        0x01, 0x15,
        0x02, 0x00,
        0x03, 0x00,

-        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+       0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */

        0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
        0x06, 0x40,   /* DAC not used, set to high impendance mode */
        0x07, 0x00,   /* DAC LSB */
        0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
        0x06, 0x40,   /* DAC not used, set to high impendance mode */
        0x07, 0x00,   /* DAC LSB */


@@ -413,7 +413,7 @@ static void frontend_init(struct budget_patch* budget)
 {
        switch(budget->dev->pci->subsystem_device) {
        case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
 {
        switch(budget->dev->pci->subsystem_device) {
        case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X

-        case 0x1013: // SATELCO Multimedia PCI
+       case 0x1013: // SATELCO Multimedia PCI

 
                // try the ALPS BSRV2 first of all
                budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
 
                // try the ALPS BSRV2 first of all
                budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);


@@ -463,8 +463,8 @@ static void frontend_init(struct budget_patch* budget)
 /* written by Emard */
 static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
 {
 /* written by Emard */
 static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
 {

-        struct budget_patch *budget;
-        int err;
+       struct budget_patch *budget;
+       int err;

        int count = 0;
        int detected = 0;
 
        int count = 0;
        int detected = 0;
 


@@ -472,12 +472,12 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 #define RPS_IRQ 0
 #define HPS_SETUP 0
 #if PATCH_RESET
 #define RPS_IRQ 0
 #define HPS_SETUP 0
 #if PATCH_RESET

-        saa7146_write(dev, MC1, MASK_31);
-        msleep(40);
+       saa7146_write(dev, MC1, MASK_31);
+       msleep(40);

 #endif
 #if HPS_SETUP
 #endif
 #if HPS_SETUP

-        // initialize registers. Better to have it like this
-        // than leaving something unconfigured
+       // initialize registers. Better to have it like this
+       // than leaving something unconfigured

        saa7146_write(dev, DD1_STREAM_B, 0);
        // port B VSYNC at rising edge
        saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!
        saa7146_write(dev, DD1_STREAM_B, 0);
        // port B VSYNC at rising edge
        saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!


@@ -486,29 +486,29 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
        // debi config
        // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
 
        // debi config
        // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
 

-        // zero all HPS registers
-        saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
-        saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
-        saa7146_write(dev, BCS_CTRL, 0);                        // r70
-        saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
-        saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
-        saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
-        saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
-        // Set HPS prescaler for port B input
-        saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
-        saa7146_write(dev, MC2,
-          0 * (MASK_08 | MASK_24)  |   // BRS control
-          0 * (MASK_09 | MASK_25)  |   // a
-          0 * (MASK_10 | MASK_26)  |   // b
-          1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
-          1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
-          0 * (MASK_01 | MASK_15)      // DEBI
-           );
+       // zero all HPS registers
+       saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
+       saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
+       saa7146_write(dev, BCS_CTRL, 0);                        // r70
+       saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
+       saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
+       saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
+       saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
+       // Set HPS prescaler for port B input
+       saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+       saa7146_write(dev, MC2,
+         0 * (MASK_08 | MASK_24)  |   // BRS control
+         0 * (MASK_09 | MASK_25)  |   // a
+         0 * (MASK_10 | MASK_26)  |   // b
+         1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
+         1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
+         0 * (MASK_01 | MASK_15)      // DEBI
+          );

 #endif
        // Disable RPS1 and RPS0
 #endif
        // Disable RPS1 and RPS0

-        saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
-        // RPS1 timeout disable
-        saa7146_write(dev, RPS_TOV1, 0);
+       saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+       // RPS1 timeout disable
+       saa7146_write(dev, RPS_TOV1, 0);

 
        // code for autodetection
        // will wait for VBI_B event (vertical blank at port B)
 
        // code for autodetection
        // will wait for VBI_B event (vertical blank at port B)


@@ -521,38 +521,38 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
        WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
          MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
 #endif
        WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
          MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
 #endif

-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));

 #if RPS_IRQ
 #if RPS_IRQ

-        // issue RPS1 interrupt to increment counter
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
-        // at least a NOP is neede between two interrupts
-        WRITE_RPS1(cpu_to_le32(CMD_NOP));
-        // interrupt again
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       // issue RPS1 interrupt to increment counter
+       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       // at least a NOP is neede between two interrupts
+       WRITE_RPS1(cpu_to_le32(CMD_NOP));
+       // interrupt again
+       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));

 #endif
 #endif

-        WRITE_RPS1(cpu_to_le32(CMD_STOP));
+       WRITE_RPS1(cpu_to_le32(CMD_STOP));

 
 #if RPS_IRQ
 
 #if RPS_IRQ

-        // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-        // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-        // use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-        saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-        // set event counter 1 treshold to maximum allowed value        (rEC p55)
-        saa7146_write(dev, ECT1R,  0x3fff );
+       // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
+       // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+       // use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
+       saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+       // set event counter 1 treshold to maximum allowed value        (rEC p55)
+       saa7146_write(dev, ECT1R,  0x3fff );

 #endif
 #endif

-        // Fix VSYNC level
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-        // Set RPS1 Address register to point to RPS code               (r108 p42)
-        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-        // Enable RPS1,                                                 (rFC p33)
-        saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+       // Fix VSYNC level
+       saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+       // Set RPS1 Address register to point to RPS code               (r108 p42)
+       saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+       // Enable RPS1,                                                 (rFC p33)
+       saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));

 
 
 
 

-        mdelay(50);
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+       mdelay(50);
+       saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);

        mdelay(150);
 
 
        mdelay(150);
 
 


@@ -560,17 +560,17 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
                detected = 1;
 
 #if RPS_IRQ
                detected = 1;
 
 #if RPS_IRQ

-        printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+       printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );

 #endif
        // Disable RPS1
 #endif
        // Disable RPS1

-        saa7146_write(dev, MC1, ( MASK_29 ));
+       saa7146_write(dev, MC1, ( MASK_29 ));

 
        if(detected == 0)
 
        if(detected == 0)

-                printk("budget-patch not detected or saa7146 in non-default state.\n"
-                       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+               printk("budget-patch not detected or saa7146 in non-default state.\n"
+                      "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");

 
        else
 
        else

-                printk("BUDGET-PATCH DETECTED.\n");
+               printk("BUDGET-PATCH DETECTED.\n");

 
 
 /*      OLD (Original design by Roberto Deza):
 
 
 /*      OLD (Original design by Roberto Deza):


@@ -641,83 +641,83 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 */
 
        // Setup RPS1 "program" (p35)
 */
 
        // Setup RPS1 "program" (p35)

-        count = 0;
+       count = 0;

 
 
 
 

-        // Wait Source Line Counter Threshold                           (p36)
-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
-        // Set GPIO3=1                                                  (p42)
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+       // Wait Source Line Counter Threshold                           (p36)
+       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+       // Set GPIO3=1                                                  (p42)
+       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));

 #if RPS_IRQ
 #if RPS_IRQ

-        // issue RPS1 interrupt
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       // issue RPS1 interrupt
+       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));

 #endif
 #endif

-        // Wait reset Source Line Counter Threshold                     (p36)
-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
-        // Set GPIO3=0                                                  (p42)
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+       // Wait reset Source Line Counter Threshold                     (p36)
+       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+       // Set GPIO3=0                                                  (p42)
+       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));

 #if RPS_IRQ
 #if RPS_IRQ

-        // issue RPS1 interrupt
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       // issue RPS1 interrupt
+       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));

 #endif
 #endif

-        // Jump to begin of RPS program                                 (p37)
-        WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-        WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
-
-        // Fix VSYNC level
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-        // Set RPS1 Address register to point to RPS code               (r108 p42)
-        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-        // Set Source Line Counter Threshold, using BRS                 (rCC p43)
-        // It generates HS event every TS_HEIGHT lines
-        // this is related to TS_WIDTH set in register
-        // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
-        // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
-        //,then RPS_THRESH1
-        // should be set to trigger every TS_HEIGHT (512) lines.
-        //
-        saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+       // Jump to begin of RPS program                                 (p37)
+       WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+       WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));

 
 

-        // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
-        // Enable RPS1                                                  (rFC p33)
-        saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
-        if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
-                return -ENOMEM;
+       // Fix VSYNC level
+       saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+       // Set RPS1 Address register to point to RPS code               (r108 p42)
+       saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+       // Set Source Line Counter Threshold, using BRS                 (rCC p43)
+       // It generates HS event every TS_HEIGHT lines
+       // this is related to TS_WIDTH set in register
+       // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+       // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+       //,then RPS_THRESH1
+       // should be set to trigger every TS_HEIGHT (512) lines.
+       //
+       saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+       // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+       // Enable RPS1                                                  (rFC p33)
+       saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+       if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+               return -ENOMEM;

 
 

-        dprintk(2, "budget: %p\n", budget);
+       dprintk(2, "budget: %p\n", budget);

 
 

-        if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
-                kfree (budget);
-                return err;
-        }
+       if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+               kfree (budget);
+               return err;
+       }

 
 
 
 

-        dev->ext_priv = budget;
+       dev->ext_priv = budget;

 
        budget->dvb_adapter.priv = budget;
        frontend_init(budget);
 
 
        budget->dvb_adapter.priv = budget;
        frontend_init(budget);
 

-        return 0;
+       return 0;

 }
 
 static int budget_patch_detach (struct saa7146_dev* dev)
 {
 }
 
 static int budget_patch_detach (struct saa7146_dev* dev)
 {

-        struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
-        int err;
+       struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+       int err;

 
        if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
 
 
        if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
 

-        err = ttpci_budget_deinit (budget);
+       err = ttpci_budget_deinit (budget);

 
 

-        kfree (budget);
+       kfree (budget);

 
 

-        return err;
+       return err;

 }
 
 static int __init budget_patch_init(void)
 }
 
 static int __init budget_patch_init(void)


@@ -727,20 +727,20 @@ static int __init budget_patch_init(void)
 
 static void __exit budget_patch_exit(void)
 {
 
 static void __exit budget_patch_exit(void)
 {

-        saa7146_unregister_extension(&budget_extension);
+       saa7146_unregister_extension(&budget_extension);

 }
 
 static struct saa7146_extension budget_extension = {
 }
 
 static struct saa7146_extension budget_extension = {

-        .name           = "budget_patch dvb\0",
-        .flags          = 0,
+       .name           = "budget_patch dvb\0",
+       .flags          = 0,

 
 

-        .module         = THIS_MODULE,
-        .pci_tbl        = pci_tbl,
-        .attach         = budget_patch_attach,
-        .detach         = budget_patch_detach,
+       .module         = THIS_MODULE,
+       .pci_tbl        = pci_tbl,
+       .attach         = budget_patch_attach,
+       .detach         = budget_patch_detach,

 
 

-        .irq_mask       = MASK_10,
-        .irq_func       = ttpci_budget_irq10_handler,
+       .irq_mask       = MASK_10,
+       .irq_func       = ttpci_budget_irq10_handler,

 };
 
 module_init(budget_patch_init);
 };
 
 module_init(budget_patch_init);


@@ -749,4 +749,4 @@ module_exit(budget_patch_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
 MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
 MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "

-                   "based so-called Budget Patch cards");
+                  "based so-called Budget Patch cards");

diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index bc4ce75..fafe640 100644 (file)
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -256,7 +256,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 
        buf[2] = ((div & 0x18000) >> 10) | 0x95;
        buf[3] = (pwr << 6) | 0x30;
 

-        // NOTE: since we're using a prescaler of 2, we set the
+       // NOTE: since we're using a prescaler of 2, we set the

        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
        // divisor frequency to 62.5kHz and divide by 125 above
 
        if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;


@@ -565,7 +565,7 @@ static u8 read_pwm(struct budget* budget)
        struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 
        struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 

-        if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+       if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))

                pwm = 0x48;
 
        return pwm;
                pwm = 0x48;
 
        return pwm;


@@ -593,7 +593,7 @@ static void frontend_init(struct budget *budget)
                budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
                if (budget->dvb_frontend) {
                        budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
                budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
                if (budget->dvb_frontend) {
                        budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;

-                       budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+                       budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;

                        budget->dvb_frontend->ops->set_tone = budget_set_tone;
                        break;
                }
                        budget->dvb_frontend->ops->set_tone = budget_set_tone;
                        break;
                }

diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index c6ef496..fdaa331 100644 (file)
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -19,7 +19,7 @@ extern int budget_debug;
 #endif
 
 #define dprintk(level,args...) \
 #endif
 
 #define dprintk(level,args...) \

-            do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
+           do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)

 
 struct budget_info {
        char *name;
 
 struct budget_info {
        char *name;

diff --git a/drivers/media/dvb/ttpci/fdump.c b/drivers/media/dvb/ttpci/fdump.c
index 0b478db..c90001d 100644 (file)
--- a/drivers/media/dvb/ttpci/fdump.c
+++ b/drivers/media/dvb/ttpci/fdump.c
@@ -36,7 +36,7 @@ int main(int argc, char **argv)
     }
 
     fprintf(fd_out, "\n};\n\n");
     }
 
     fprintf(fd_out, "\n};\n\n");

-    
+

     fclose(fd_in);
     fclose(fd_out);
 
     fclose(fd_in);
     fclose(fd_out);
 

diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c
index ac79ef1..18aa22b 100644 (file)
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.c
+++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c
@@ -13,7 +13,7 @@
     Holger Waechtler   Convergence
 
     Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
     Holger Waechtler   Convergence
 
     Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>

-                            Metzler Brothers Systementwicklung GbR
+                           Metzler Brothers Systementwicklung GbR

 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by


@@ -48,41 +48,41 @@
 
 static int check_mac_tt(u8 *buf)
 {
 
 static int check_mac_tt(u8 *buf)
 {

-        int i;
-        u16 tmp = 0xffff;
-
-        for (i = 0; i < 8; i++) {
-                tmp  = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
-                tmp ^= (tmp >> 4) & 0x0f;
-                tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
-        }
-        tmp ^= 0xffff;
-        return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
+       int i;
+       u16 tmp = 0xffff;
+
+       for (i = 0; i < 8; i++) {
+               tmp  = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
+               tmp ^= (tmp >> 4) & 0x0f;
+               tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
+       }
+       tmp ^= 0xffff;
+       return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));

 }
 
 static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
 {
 }
 
 static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
 {

-        u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
+       u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,

                       0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
                       0x1d, 0x36, 0x64, 0x78};
                       0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
                       0x1d, 0x36, 0x64, 0x78};

-        u8 data[20];
-        int i;
+       u8 data[20];
+       int i;

 
        /* In case there is a sig check failure have the orig contents available */
        memcpy(data, encodedMAC, 20);
 
        for (i = 0; i < 20; i++)
 
        /* In case there is a sig check failure have the orig contents available */
        memcpy(data, encodedMAC, 20);
 
        for (i = 0; i < 20; i++)

-                data[i] ^= xor[i];
-        for (i = 0; i < 10; i++)
-                data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
+               data[i] ^= xor[i];
+       for (i = 0; i < 10; i++)
+               data[i] = ((data[2 * i + 1] << 8) | data[2 * i])

                        >> ((data[2 * i + 1] >> 6) & 3);
 
                        >> ((data[2 * i + 1] >> 6) & 3);
 

-        if (check_mac_tt(data))
-                return -ENODEV;
+       if (check_mac_tt(data))
+               return -ENODEV;

 
        decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
        decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];
 
        decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
        decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];

-        return 0;
+       return 0;

 }
 
 static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
 }
 
 static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)

diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index fd53d60..104df61 100644 (file)
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -225,8 +225,8 @@ static int ttusb_i2c_msg(struct ttusb *ttusb,
 
        err = ttusb_result(ttusb, b, 0x20);
 
 
        err = ttusb_result(ttusb, b, 0x20);
 

-        /* check if the i2c transaction was successful */
-        if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
+       /* check if the i2c transaction was successful */
+       if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;

 
        if (rcv_len > 0) {
 
 
        if (rcv_len > 0) {
 


@@ -489,27 +489,27 @@ static int ttusb_send_diseqc(struct dvb_frontend* fe,
 
 static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
 
 static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {

-        struct  ttusb* ttusb = (struct ttusb*)  fe->dvb->priv;
-        int ret;
-        u8 data[1];
-        struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
-
-        switch(voltage) {
-        case SEC_VOLTAGE_OFF:
-                data[0] = 0x00;
-                break;
-        case SEC_VOLTAGE_13:
-                data[0] = 0x44;
-                break;
-        case SEC_VOLTAGE_18:
-                data[0] = 0x4c;
-                break;
-        default:
-                return -EINVAL;
-        };
-
-        ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
-        return (ret != 1) ? -EIO : 0;
+       struct  ttusb* ttusb = (struct ttusb*)  fe->dvb->priv;
+       int ret;
+       u8 data[1];
+       struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+       switch(voltage) {
+       case SEC_VOLTAGE_OFF:
+               data[0] = 0x00;
+               break;
+       case SEC_VOLTAGE_13:
+               data[0] = 0x44;
+               break;
+       case SEC_VOLTAGE_18:
+               data[0] = 0x4c;
+               break;
+       default:
+               return -EINVAL;
+       };
+
+       ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
+       return (ret != 1) ? -EIO : 0;

 }
 
 static int ttusb_update_lnb(struct ttusb *ttusb)
 }
 
 static int ttusb_update_lnb(struct ttusb *ttusb)


@@ -1184,45 +1184,45 @@ static struct tda1004x_config philips_tdm1316l_config = {
 };
 
 static u8 alps_bsbe1_inittab[] = {
 };
 
 static u8 alps_bsbe1_inittab[] = {

-        0x01, 0x15,
-        0x02, 0x30,
-        0x03, 0x00,
-        0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-        0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
-        0x06, 0x40,             /* DAC not used, set to high impendance mode */
-        0x07, 0x00,             /* DAC LSB */
-        0x08, 0x40,             /* DiSEqC off, LNB power on OP2/LOCK pin on */
-        0x09, 0x00,             /* FIFO */
-        0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-        0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
-        0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
-        0x10, 0x3f,             // AGC2  0x3d
-        0x11, 0x84,
-        0x12, 0xb9,
-        0x15, 0xc9,             // lock detector threshold
-        0x16, 0x00,
-        0x17, 0x00,
-        0x18, 0x00,
-        0x19, 0x00,
-        0x1a, 0x00,
-        0x1f, 0x50,
-        0x20, 0x00,
-        0x21, 0x00,
-        0x22, 0x00,
-        0x23, 0x00,
-        0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
-        0x29, 0x1e,             // 1/2 threshold
-        0x2a, 0x14,             // 2/3 threshold
-        0x2b, 0x0f,             // 3/4 threshold
-        0x2c, 0x09,             // 5/6 threshold
-        0x2d, 0x05,             // 7/8 threshold
-        0x2e, 0x01,
-        0x31, 0x1f,             // test all FECs
-        0x32, 0x19,             // viterbi and synchro search
-        0x33, 0xfc,             // rs control
-        0x34, 0x93,             // error control
-        0x0f, 0x92,
-        0xff, 0xff
+       0x01, 0x15,
+       0x02, 0x30,
+       0x03, 0x00,
+       0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+       0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
+       0x06, 0x40,             /* DAC not used, set to high impendance mode */
+       0x07, 0x00,             /* DAC LSB */
+       0x08, 0x40,             /* DiSEqC off, LNB power on OP2/LOCK pin on */
+       0x09, 0x00,             /* FIFO */
+       0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+       0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
+       0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
+       0x10, 0x3f,             // AGC2  0x3d
+       0x11, 0x84,
+       0x12, 0xb9,
+       0x15, 0xc9,             // lock detector threshold
+       0x16, 0x00,
+       0x17, 0x00,
+       0x18, 0x00,
+       0x19, 0x00,
+       0x1a, 0x00,
+       0x1f, 0x50,
+       0x20, 0x00,
+       0x21, 0x00,
+       0x22, 0x00,
+       0x23, 0x00,
+       0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
+       0x29, 0x1e,             // 1/2 threshold
+       0x2a, 0x14,             // 2/3 threshold
+       0x2b, 0x0f,             // 3/4 threshold
+       0x2c, 0x09,             // 5/6 threshold
+       0x2d, 0x05,             // 7/8 threshold
+       0x2e, 0x01,
+       0x31, 0x1f,             // test all FECs
+       0x32, 0x19,             // viterbi and synchro search
+       0x33, 0xfc,             // rs control
+       0x34, 0x93,             // error control
+       0x0f, 0x92,
+       0xff, 0xff

 };
 
 static u8 alps_bsru6_inittab[] = {
 };
 
 static u8 alps_bsru6_inittab[] = {


@@ -1350,7 +1350,7 @@ static int ttusb_novas_grundig_29504_491_pll_set(struct dvb_frontend *fe, struct
        u32 div;
        struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
 
        u32 div;
        struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
 

-        div = params->frequency / 125;
+       div = params->frequency / 125;

 
        buf[0] = (div >> 8) & 0x7f;
        buf[1] = div & 0xff;
 
        buf[0] = (div >> 8) & 0x7f;
        buf[1] = div & 0xff;


@@ -1487,7 +1487,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
        udev = interface_to_usbdev(intf);
 
 
        udev = interface_to_usbdev(intf);
 

-        if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
+       if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;

 
        if (!(ttusb = kmalloc(sizeof(struct ttusb), GFP_KERNEL)))
                return -ENOMEM;
 
        if (!(ttusb = kmalloc(sizeof(struct ttusb), GFP_KERNEL)))
                return -ENOMEM;

diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 832d179..8abc218 100644 (file)
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1203,7 +1203,7 @@ static int ttusb_init_rc(struct ttusb_dec *dec)
        input_dev->keycode = rc_keys;
 
        for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
        input_dev->keycode = rc_keys;
 
        for (i = 0; i < ARRAY_SIZE(rc_keys); i++)

-                set_bit(rc_keys[i], input_dev->keybit);
+               set_bit(rc_keys[i], input_dev->keybit);

 
        input_register_device(input_dev);
 
 
        input_register_device(input_dev);
 


@@ -1529,7 +1529,7 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
        usb_free_urb(dec->irq_urb);
 
        usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
        usb_free_urb(dec->irq_urb);
 
        usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,

-                          dec->irq_buffer, dec->irq_dma_handle);
+                          dec->irq_buffer, dec->irq_dma_handle);

 
        if (dec->rc_input_dev) {
                input_unregister_device(dec->rc_input_dev);
 
        if (dec->rc_input_dev) {
                input_unregister_device(dec->rc_input_dev);