X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=net%2Fnetfilter%2FKconfig;h=4469d45261f4bb372cc2e3c1edce4e5aef9c7291;hb=9ab99d5a43e9f283738fd9fd365539306d13eaac;hp=a84f9221e5f02d4e5d41640f010d0472346dd85f;hpb=9fb9cbb1082d6b31fb45aa1a14432449a0df6cf1;p=safe%2Fjmp%2Flinux-2.6 diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index a84f922..4469d45 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -1,22 +1,21 @@ menu "Core Netfilter Configuration" - depends on NET && NETFILTER + depends on NET && INET && NETFILTER config NETFILTER_NETLINK - tristate "Netfilter netlink interface" - help - If this option is enabled, the kernel will include support - for the new netfilter netlink interface. + tristate config NETFILTER_NETLINK_QUEUE tristate "Netfilter NFQUEUE over NFNETLINK interface" - depends on NETFILTER_NETLINK + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK help - If this option isenabled, the kernel will include support + If this option is enabled, the kernel will include support for queueing packets via NFNETLINK. config NETFILTER_NETLINK_LOG tristate "Netfilter LOG over NFNETLINK interface" - depends on NETFILTER_NETLINK + default m if NETFILTER_ADVANCED=n + select NETFILTER_NETLINK help If this option is enabled, the kernel will include support for logging packets via NFNETLINK. @@ -26,22 +25,24 @@ config NETFILTER_NETLINK_LOG and ip6t_LOG modules. config NF_CONNTRACK - tristate "Layer 3 Independent Connection tracking (EXPERIMENTAL)" - depends on EXPERIMENTAL && IP_NF_CONNTRACK=n - default n - ---help--- + tristate "Netfilter connection tracking support" + default m if NETFILTER_ADVANCED=n + help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. - Layer 3 independent connection tracking is experimental scheme - which generalize ip_conntrack to support other layer 3 protocols. + This is required to do Masquerading or other kinds of Network + Address Translation. It can also be used to enhance packet + filtering (see `Connection state match support' below). To compile it as a module, choose M here. If unsure, say N. +if NF_CONNTRACK + config NF_CT_ACCT bool "Connection tracking flow accounting" - depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED help If this option is enabled, the connection tracking code will keep per-flow packet and byte counters. @@ -49,41 +50,103 @@ config NF_CT_ACCT Those counters can be used for flow-based accounting or the `connbytes' match. + Please note that currently this option only sets a default state. + You may change it at boot time with nf_conntrack.acct=0/1 kernel + parameter or by loading the nf_conntrack module with acct=0/1. + + You may also disable/enable it on a running system with: + sysctl net.netfilter.nf_conntrack_acct=0/1 + + This option will be removed in 2.6.29. + If unsure, say `N'. config NF_CONNTRACK_MARK bool 'Connection mark tracking support' - depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED help This option enables support for connection marks, used by the `CONNMARK' target and `connmark' match. Similar to the mark value of packets, but this mark value is kept in the conntrack session instead of the individual packets. +config NF_CONNTRACK_SECMARK + bool 'Connection tracking security mark support' + depends on NETWORK_SECMARK + default m if NETFILTER_ADVANCED=n + help + This option enables security markings to be applied to + connections. Typically they are copied to connections from + packets using the CONNSECMARK target and copied back from + connections to packets with the same target, with the packets + being originally labeled via SECMARK. + + If unsure, say 'N'. + config NF_CONNTRACK_EVENTS bool "Connection tracking events" - depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED help If this option is enabled, the connection tracking code will provide a notifier chain that can be used by other kernel code - to get notified aboutchanges in the connection tracking state. + to get notified about changes in the connection tracking state. If unsure, say `N'. +config NF_CT_PROTO_DCCP + tristate 'DCCP protocol connection tracking support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on NETFILTER_ADVANCED + default IP_DCCP + help + With this option enabled, the layer 3 independent connection + tracking code will be able to do state tracking on DCCP connections. + + If unsure, say 'N'. + +config NF_CT_PROTO_GRE + tristate + config NF_CT_PROTO_SCTP - tristate 'SCTP protocol on new connection tracking support (EXPERIMENTAL)' - depends on EXPERIMENTAL && NF_CONNTRACK - default n + tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on NETFILTER_ADVANCED + default IP_SCTP help With this option enabled, the layer 3 independent connection tracking code will be able to do state tracking on SCTP connections. If you want to compile it as a module, say M here and read - Documentation/modules.txt. If unsure, say `N'. + . If unsure, say `N'. + +config NF_CT_PROTO_UDPLITE + tristate 'UDP-Lite protocol connection tracking support' + depends on NETFILTER_ADVANCED + help + With this option enabled, the layer 3 independent connection + tracking code will be able to do state tracking on UDP-Lite + connections. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_AMANDA + tristate "Amanda backup protocol support" + depends on NETFILTER_ADVANCED + select TEXTSEARCH + select TEXTSEARCH_KMP + help + If you are running the Amanda backup package + on this machine or machines that will be MASQUERADED through this + machine, then you may want to enable this feature. This allows the + connection tracking and natting code to allow the sub-channels that + Amanda requires for communication of the backup data, messages and + index. + + To compile it as a module, choose M here. If unsure, say N. config NF_CONNTRACK_FTP - tristate "FTP support on new connection tracking (EXPERIMENTAL)" - depends on EXPERIMENTAL && NF_CONNTRACK + tristate "FTP protocol support" + default m if NETFILTER_ADVANCED=n help Tracking FTP connections is problematic: special helpers are required for tracking them, and doing masquerading and other forms @@ -95,4 +158,792 @@ config NF_CONNTRACK_FTP To compile it as a module, choose M here. If unsure, say N. +config NF_CONNTRACK_H323 + tristate "H.323 protocol support" + depends on (IPV6 || IPV6=n) + depends on NETFILTER_ADVANCED + help + H.323 is a VoIP signalling protocol from ITU-T. As one of the most + important VoIP protocols, it is widely used by voice hardware and + software including voice gateways, IP phones, Netmeeting, OpenPhone, + Gnomemeeting, etc. + + With this module you can support H.323 on a connection tracking/NAT + firewall. + + This module supports RAS, Fast Start, H.245 Tunnelling, Call + Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, + whiteboard, file transfer, etc. For more information, please + visit http://nath323.sourceforge.net/. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_IRC + tristate "IRC protocol support" + default m if NETFILTER_ADVANCED=n + help + There is a commonly-used extension to IRC called + Direct Client-to-Client Protocol (DCC). This enables users to send + files to each other, and also chat to each other without the need + of a server. DCC Sending is used anywhere you send files over IRC, + and DCC Chat is most commonly used by Eggdrop bots. If you are + using NAT, this extension will enable you to send files and initiate + chats. Note that you do NOT need this extension to get files or + have others initiate chats, or everything else in IRC. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_NETBIOS_NS + tristate "NetBIOS name service protocol support" + depends on NETFILTER_ADVANCED + help + NetBIOS name service requests are sent as broadcast messages from an + unprivileged port and responded to with unicast messages to the + same port. This make them hard to firewall properly because connection + tracking doesn't deal with broadcasts. This helper tracks locally + originating NetBIOS name service requests and the corresponding + responses. It relies on correct IP address configuration, specifically + netmask and broadcast address. When properly configured, the output + of "ip address show" should look similar to this: + + $ ip -4 address show eth0 + 4: eth0: mtu 1500 qdisc pfifo_fast qlen 1000 + inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_PPTP + tristate "PPtP protocol support" + depends on NETFILTER_ADVANCED + select NF_CT_PROTO_GRE + help + This module adds support for PPTP (Point to Point Tunnelling + Protocol, RFC2637) connection tracking and NAT. + + If you are running PPTP sessions over a stateful firewall or NAT + box, you may want to enable this feature. + + Please note that not all PPTP modes of operation are supported yet. + Specifically these limitations exist: + - Blindly assumes that control connections are always established + in PNS->PAC direction. This is a violation of RFC2637. + - Only supports a single call within each session + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_SANE + tristate "SANE protocol support (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on NETFILTER_ADVANCED + help + SANE is a protocol for remote access to scanners as implemented + by the 'saned' daemon. Like FTP, it uses separate control and + data connections. + + With this module you can support SANE on a connection tracking + firewall. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_SIP + tristate "SIP protocol support" + default m if NETFILTER_ADVANCED=n + help + SIP is an application-layer control protocol that can establish, + modify, and terminate multimedia sessions (conferences) such as + Internet telephony calls. With the ip_conntrack_sip and + the nf_nat_sip modules you can support the protocol on a connection + tracking/NATing firewall. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_TFTP + tristate "TFTP protocol support" + depends on NETFILTER_ADVANCED + help + TFTP connection tracking helper, this is required depending + on how restrictive your ruleset is. + If you are using a tftp client behind -j SNAT or -j MASQUERADING + you will need this. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CT_NETLINK + tristate 'Connection tracking netlink interface' + select NETFILTER_NETLINK + default m if NETFILTER_ADVANCED=n + help + This option enables support for a netlink-based userspace interface + +endif # NF_CONNTRACK + +# transparent proxy support +config NETFILTER_TPROXY + tristate "Transparent proxying support (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on IP_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option enables transparent proxying support, that is, + support for handling non-locally bound IPv4 TCP and UDP sockets. + For it to work you will have to configure certain iptables rules + and use policy routing. For more information on how to set it up + see Documentation/networking/tproxy.txt. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XTABLES + tristate "Netfilter Xtables support (required for ip_tables)" + default m if NETFILTER_ADVANCED=n + help + This is required if you intend to use any of ip_tables, + ip6_tables or arp_tables. + +if NETFILTER_XTABLES + +# alphabetically ordered list of targets + +config NETFILTER_XT_TARGET_CLASSIFY + tristate '"CLASSIFY" target support' + depends on NETFILTER_ADVANCED + help + This option adds a `CLASSIFY' target, which enables the user to set + the priority of a packet. Some qdiscs can use this value for + classification, among these are: + + atm, cbq, dsmark, pfifo_fast, htb, prio + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CONNMARK + tristate '"CONNMARK" target support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_MARK + help + This option adds a `CONNMARK' target, which allows one to manipulate + the connection mark value. Similar to the MARK target, but + affects the connection mark value rather than the packet mark value. + + If you want to compile it as a module, say M here and read + . The module will be called + ipt_CONNMARK. If unsure, say `N'. + +config NETFILTER_XT_TARGET_CONNSECMARK + tristate '"CONNSECMARK" target support' + depends on NF_CONNTRACK && NF_CONNTRACK_SECMARK + default m if NETFILTER_ADVANCED=n + help + The CONNSECMARK target copies security markings from packets + to connections, and restores security markings from connections + to packets (if the packets are not already marked). This would + normally be used in conjunction with the SECMARK target. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CT + tristate '"CT" target support' + depends on NF_CONNTRACK + depends on IP_NF_RAW || IP6_NF_RAW + depends on NETFILTER_ADVANCED + help + This options adds a `CT' target, which allows to specify initial + connection tracking parameters like events to be delivered and + the helper to be used. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_DSCP + tristate '"DSCP" and "TOS" target support' + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds a `DSCP' target, which allows you to manipulate + the IPv4/IPv6 header DSCP field (differentiated services codepoint). + + The DSCP field can have any value between 0x0 and 0x3f inclusive. + + It also adds the "TOS" target, which allows you to create rules in + the "mangle" table which alter the Type Of Service field of an IPv4 + or the Priority field of an IPv6 packet, prior to routing. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_HL + tristate '"HL" hoplimit target support' + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + ---help--- + This option adds the "HL" (for IPv6) and "TTL" (for IPv4) + targets, which enable the user to change the + hoplimit/time-to-live value of the IP header. + + While it is safe to decrement the hoplimit/TTL value, the + modules also allow to increment and set the hoplimit value of + the header to arbitrary values. This is EXTREMELY DANGEROUS + since you can easily create immortal packets that loop + forever on the network. + +config NETFILTER_XT_TARGET_LED + tristate '"LED" target support' + depends on LEDS_CLASS && LEDS_TRIGGERS + depends on NETFILTER_ADVANCED + help + This option adds a `LED' target, which allows you to blink LEDs in + response to particular packets passing through your machine. + + This can be used to turn a spare LED into a network activity LED, + which only flashes in response to FTP transfers, for example. Or + you could have an LED which lights up for a minute or two every time + somebody connects to your machine via SSH. + + You will need support for the "led" class to make this work. + + To create an LED trigger for incoming SSH traffic: + iptables -A INPUT -p tcp --dport 22 -j LED --led-trigger-id ssh --led-delay 1000 + + Then attach the new trigger to an LED on your system: + echo netfilter-ssh > /sys/class/leds//trigger + + For more information on the LEDs available on your system, see + Documentation/leds-class.txt + +config NETFILTER_XT_TARGET_MARK + tristate '"MARK" target support' + default m if NETFILTER_ADVANCED=n + help + This option adds a `MARK' target, which allows you to create rules + in the `mangle' table which alter the netfilter mark (nfmark) field + associated with the packet prior to routing. This can change + the routing method (see `Use netfilter MARK value as routing + key') and can also be used by other subsystems to change their + behavior. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NFLOG + tristate '"NFLOG" target support' + default m if NETFILTER_ADVANCED=n + select NETFILTER_NETLINK_LOG + help + This option enables the NFLOG target, which allows to LOG + messages through nfnetlink_log. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NFQUEUE + tristate '"NFQUEUE" target Support' + depends on NETFILTER_ADVANCED + help + This target replaced the old obsolete QUEUE target. + + As opposed to QUEUE, it supports 65535 different queues, + not just one. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NOTRACK + tristate '"NOTRACK" target support' + depends on IP_NF_RAW || IP6_NF_RAW + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + The NOTRACK target allows a select rule to specify + which packets *not* to enter the conntrack/NAT + subsystem with all the consequences (no ICMP error tracking, + no protocol helpers for the selected packets). + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_TARGET_RATEEST + tristate '"RATEEST" target support' + depends on NETFILTER_ADVANCED + help + This option adds a `RATEEST' target, which allows to measure + rates similar to TC estimators. The `rateest' match can be + used to match on the measured rates. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TPROXY + tristate '"TPROXY" target support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on NETFILTER_TPROXY + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + select NF_DEFRAG_IPV4 + help + This option adds a `TPROXY' target, which is somewhat similar to + REDIRECT. It can only be used in the mangle table and is useful + to redirect traffic to a transparent proxy. It does _not_ depend + on Netfilter connection tracking and NAT, unlike REDIRECT. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TRACE + tristate '"TRACE" target support' + depends on IP_NF_RAW || IP6_NF_RAW + depends on NETFILTER_ADVANCED + help + The TRACE target allows you to mark packets so that the kernel + will log every rule which match the packets as those traverse + the tables, chains, rules. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_TARGET_SECMARK + tristate '"SECMARK" target support' + depends on NETWORK_SECMARK + default m if NETFILTER_ADVANCED=n + help + The SECMARK target allows security marking of network + packets, for use with security subsystems. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TCPMSS + tristate '"TCPMSS" target support' + depends on (IPV6 || IPV6=n) + default m if NETFILTER_ADVANCED=n + ---help--- + This option adds a `TCPMSS' target, which allows you to alter the + MSS value of TCP SYN packets, to control the maximum size for that + connection (usually limiting it to your outgoing interface's MTU + minus 40). + + This is used to overcome criminally braindead ISPs or servers which + block ICMP Fragmentation Needed packets. The symptoms of this + problem are that everything works fine from your Linux + firewall/router, but machines behind it can never exchange large + packets: + 1) Web browsers connect, then hang with no data received. + 2) Small mail works fine, but large emails hang. + 3) ssh works fine, but scp hangs after initial handshaking. + + Workaround: activate this option and add a rule to your firewall + configuration like: + + iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \ + -j TCPMSS --clamp-mss-to-pmtu + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TCPOPTSTRIP + tristate '"TCPOPTSTRIP" target support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds a "TCPOPTSTRIP" target, which allows you to strip + TCP options from TCP packets. + +config NETFILTER_XT_MATCH_CLUSTER + tristate '"cluster" match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + ---help--- + This option allows you to build work-load-sharing clusters of + network servers/stateful firewalls without having a dedicated + load-balancing router/server/switch. Basically, this match returns + true when the packet must be handled by this cluster node. Thus, + all nodes see all packets and this match decides which node handles + what packets. The work-load sharing algorithm is based on source + address hashing. + + If you say Y or M here, try `iptables -m cluster --help` for + more information. + +config NETFILTER_XT_MATCH_COMMENT + tristate '"comment" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `comment' dummy-match, which allows you to put + comments in your iptables ruleset. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_CONNBYTES + tristate '"connbytes" per-connection counter match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NF_CT_ACCT + help + This option adds a `connbytes' match, which allows you to match the + number of bytes and/or packets for each direction within a connection. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_CONNLIMIT + tristate '"connlimit" match support"' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + ---help--- + This match allows you to match against the number of parallel + connections to a server per client IP address (or address block). + +config NETFILTER_XT_MATCH_CONNMARK + tristate '"connmark" connection mark match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_MARK + help + This option adds a `connmark' match, which allows you to match the + connection mark value previously set for the session by `CONNMARK'. + + If you want to compile it as a module, say M here and read + . The module will be called + ipt_connmark. If unsure, say `N'. + +config NETFILTER_XT_MATCH_CONNTRACK + tristate '"conntrack" connection tracking match support' + depends on NF_CONNTRACK + default m if NETFILTER_ADVANCED=n + help + This is a general conntrack match module, a superset of the state match. + + It allows matching on additional conntrack information, which is + useful in complex configurations, such as NAT gateways with multiple + internet links or tunnels. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_DCCP + tristate '"dccp" protocol match support' + depends on NETFILTER_ADVANCED + default IP_DCCP + help + With this option enabled, you will be able to use the iptables + `dccp' match in order to match on DCCP source/destination ports + and DCCP flags. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_DSCP + tristate '"dscp" and "tos" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `DSCP' match, which allows you to match against + the IPv4/IPv6 header DSCP field (differentiated services codepoint). + + The DSCP field can have any value between 0x0 and 0x3f inclusive. + + It will also add a "tos" match, which allows you to match packets + based on the Type Of Service fields of the IPv4 packet (which share + the same bits as DSCP). + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_ESP + tristate '"esp" match support' + depends on NETFILTER_ADVANCED + help + This match extension allows you to match a range of SPIs + inside ESP header of IPSec packets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_HASHLIMIT + tristate '"hashlimit" match support' + depends on (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) + depends on NETFILTER_ADVANCED + help + This option adds a `hashlimit' match. + + As opposed to `limit', this match dynamically creates a hash table + of limit buckets, based on your selection of source/destination + addresses and/or ports. + + It enables you to express policies like `10kpps for any given + destination address' or `500pps from any given source address' + with a single rule. + +config NETFILTER_XT_MATCH_HELPER + tristate '"helper" match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + Helper matching allows you to match packets in dynamic connections + tracked by a conntrack-helper, ie. ip_conntrack_ftp + + To compile it as a module, choose M here. If unsure, say Y. + +config NETFILTER_XT_MATCH_HL + tristate '"hl" hoplimit/TTL match support' + depends on NETFILTER_ADVANCED + ---help--- + HL matching allows you to match packets based on the hoplimit + in the IPv6 header, or the time-to-live field in the IPv4 + header of the packet. + +config NETFILTER_XT_MATCH_IPRANGE + tristate '"iprange" address range match support' + depends on NETFILTER_ADVANCED + ---help--- + This option adds a "iprange" match, which allows you to match based on + an IP address range. (Normal iptables only matches on single addresses + with an optional mask.) + + If unsure, say M. + +config NETFILTER_XT_MATCH_LENGTH + tristate '"length" match support' + depends on NETFILTER_ADVANCED + help + This option allows you to match the length of a packet against a + specific value or range of values. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_LIMIT + tristate '"limit" match support' + depends on NETFILTER_ADVANCED + help + limit matching allows you to control the rate at which a rule can be + matched: mainly useful in combination with the LOG target ("LOG + target support", below) and to avoid some Denial of Service attacks. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_MAC + tristate '"mac" address match support' + depends on NETFILTER_ADVANCED + help + MAC matching allows you to match packets based on the source + Ethernet address of the packet. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_MARK + tristate '"mark" match support' + default m if NETFILTER_ADVANCED=n + help + Netfilter mark matching allows you to match packets based on the + `nfmark' value in the packet. This can be set by the MARK target + (see below). + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_MULTIPORT + tristate '"multiport" Multiple port match support' + depends on NETFILTER_ADVANCED + help + Multiport matching allows you to match TCP or UDP packets based on + a series of source or destination ports: normally a rule can only + match a single range of ports. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_OWNER + tristate '"owner" match support' + depends on NETFILTER_ADVANCED + ---help--- + Socket owner matching allows you to match locally-generated packets + based on who created the socket: the user or group. It is also + possible to check whether a socket actually exists. + +config NETFILTER_XT_MATCH_POLICY + tristate 'IPsec "policy" match support' + depends on XFRM + default m if NETFILTER_ADVANCED=n + help + Policy matching allows you to match packets based on the + IPsec policy that was used during decapsulation/will + be used during encapsulation. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_PHYSDEV + tristate '"physdev" match support' + depends on BRIDGE && BRIDGE_NETFILTER + depends on NETFILTER_ADVANCED + help + Physdev packet matching matches against the physical bridge ports + the IP packet arrived on or will leave by. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_PKTTYPE + tristate '"pkttype" packet type match support' + depends on NETFILTER_ADVANCED + help + Packet type matching allows you to match a packet by + its "class", eg. BROADCAST, MULTICAST, ... + + Typical usage: + iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_QUOTA + tristate '"quota" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `quota' match, which allows to match on a + byte counter. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_RATEEST + tristate '"rateest" match support' + depends on NETFILTER_ADVANCED + select NETFILTER_XT_TARGET_RATEEST + help + This option adds a `rateest' match, which allows to match on the + rate estimated by the RATEEST target. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_REALM + tristate '"realm" match support' + depends on NETFILTER_ADVANCED + select NET_CLS_ROUTE + help + This option adds a `realm' match, which allows you to use the realm + key from the routing subsystem inside iptables. + + This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option + in tc world. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_RECENT + tristate '"recent" match support' + depends on NETFILTER_ADVANCED + ---help--- + This match is used for creating one or many lists of recently + used addresses and then matching against that/those list(s). + + Short options are available by using 'iptables -m recent -h' + Official Website: + +config NETFILTER_XT_MATCH_RECENT_PROC_COMPAT + bool 'Enable obsolete /proc/net/ipt_recent' + depends on NETFILTER_XT_MATCH_RECENT && PROC_FS + ---help--- + This option enables the old /proc/net/ipt_recent interface, + which has been obsoleted by /proc/net/xt_recent. + +config NETFILTER_XT_MATCH_SCTP + tristate '"sctp" protocol match support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on NETFILTER_ADVANCED + default IP_SCTP + help + With this option enabled, you will be able to use the + `sctp' match in order to match on SCTP source/destination ports + and SCTP chunk types. + + If you want to compile it as a module, say M here and read + . If unsure, say `N'. + +config NETFILTER_XT_MATCH_SOCKET + tristate '"socket" match support (EXPERIMENTAL)' + depends on EXPERIMENTAL + depends on NETFILTER_TPROXY + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + depends on !NF_CONNTRACK || NF_CONNTRACK + select NF_DEFRAG_IPV4 + help + This option adds a `socket' match, which can be used to match + packets for which a TCP or UDP socket lookup finds a valid socket. + It can be used in combination with the MARK target and policy + routing to implement full featured non-locally bound sockets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STATE + tristate '"state" match support' + depends on NF_CONNTRACK + default m if NETFILTER_ADVANCED=n + help + Connection state matching allows you to match packets based on their + relationship to a tracked connection (ie. previous packets). This + is a powerful tool for packet classification. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STATISTIC + tristate '"statistic" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `statistic' match, which allows you to match + on packets periodically or randomly with a given percentage. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STRING + tristate '"string" match support' + depends on NETFILTER_ADVANCED + select TEXTSEARCH + select TEXTSEARCH_KMP + select TEXTSEARCH_BM + select TEXTSEARCH_FSM + help + This option adds a `string' match, which allows you to look for + pattern matchings in packets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_TCPMSS + tristate '"tcpmss" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `tcpmss' match, which allows you to examine the + MSS value of TCP SYN packets, which control the maximum packet size + for that connection. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_TIME + tristate '"time" match support' + depends on NETFILTER_ADVANCED + ---help--- + This option adds a "time" match, which allows you to match based on + the packet arrival time (at the machine which netfilter is running) + on) or departure time/date (for locally generated packets). + + If you say Y here, try `iptables -m time --help` for + more information. + + If you want to compile it as a module, say M here. + If unsure, say N. + +config NETFILTER_XT_MATCH_U32 + tristate '"u32" match support' + depends on NETFILTER_ADVANCED + ---help--- + u32 allows you to extract quantities of up to 4 bytes from a packet, + AND them with specified masks, shift them by specified amounts and + test whether the results are in any of a set of specified ranges. + The specification of what to extract is general enough to skip over + headers with lengths stored in the packet, as in IP or TCP header + lengths. + + Details and examples are in the kernel module source. + +config NETFILTER_XT_MATCH_OSF + tristate '"osf" Passive OS fingerprint match' + depends on NETFILTER_ADVANCED && NETFILTER_NETLINK + help + This option selects the Passive OS Fingerprinting match module + that allows to passively match the remote operating system by + analyzing incoming TCP SYN packets. + + Rules and loading software can be downloaded from + http://www.ioremap.net/projects/osf + + To compile it as a module, choose M here. If unsure, say N. + +endif # NETFILTER_XTABLES + endmenu + +source "net/netfilter/ipvs/Kconfig"